irqchip/renesas-rzv2h: Add RZ/G3E support

The ICU block on the RZ/G3E SoC is almost identical to the one found on
the RZ/V2H SoC, with the following differences:

- The TINT register base offset is 0x800 instead of zero.
- The number of GPIO interrupts for TINT selection is 141 instead of 86.
- The pin index and TINT selection index are not in the 1:1 map.
- The number of TSSR registers is 16 instead of 8.
- Each TSSR register can program 2 TINTs instead of 4 TINTs.

Add support for the RZ/G3E driver by filling the rzv2h_hw_info table and
adding LUT for mapping between pin index and TINT selection index.

Signed-off-by: Biju Das <[e-mail]>
Signed-off-by: Thomas Gleixner <[e-mail]>
Reviewed-by: Fabrizio Castro <[e-mail]>
Reviewed-by: Tommaso Merciai <[e-mail]>
Reviewed-by: Geert Uytterhoeven <[e-mail]>
Link: https://lore.kernel.org/all/[e-mail]

drivers/irqchip/irq-renesas-rzv2h.c

···
 
 #define ICU_TINT_EXTRACT_HWIRQ(x)		FIELD_GET(GENMASK(15, 0), (x))
 #define ICU_TINT_EXTRACT_GPIOINT(x)		FIELD_GET(GENMASK(31, 16), (x))
+#define ICU_RZG3E_TINT_OFFSET			0x800
+#define ICU_RZG3E_TSSEL_MAX_VAL			0x8c
 #define ICU_RZV2H_TSSEL_MAX_VAL			0x55
 
 /**
  * struct rzv2h_hw_info - Interrupt Control Unit controller hardware info structure.
+ * @tssel_lut:		TINT lookup table
  * @t_offs:		TINT offset
  * @max_tssel:		TSSEL max value
  * @field_width:	TSSR field width
  */
 struct rzv2h_hw_info {
+	const u8	*tssel_lut;
 	u16		t_offs;
 	u8		max_tssel;
 	u8		field_width;
···
 	if (tint > priv->info->max_tssel)
 		return -EINVAL;
 
+	if (priv->info->tssel_lut)
+		tint = priv->info->tssel_lut[tint];
+
 	hwirq = irqd_to_hwirq(d);
 	tint_nr = hwirq - ICU_TINT_START;
 
···
 	return ret;
 }
 
+/* Mapping based on port index on Table 4.2-6 and TSSEL bits on Table 4.6-4 */
+static const u8 rzg3e_tssel_lut[] = {
+	81, 82, 83, 84, 85, 86, 87, 88,		/* P00-P07 */
+	89, 90, 91, 92, 93, 94, 95, 96,		/* P10-P17 */
+	111, 112,				/* P20-P21 */
+	97, 98, 99, 100, 101, 102, 103, 104,	/* P30-P37 */
+	105, 106, 107, 108, 109, 110,		/* P40-P45 */
+	113, 114, 115, 116, 117, 118, 119,	/* P50-P56 */
+	120, 121, 122, 123, 124, 125, 126,	/* P60-P66 */
+	127, 128, 129, 130, 131, 132, 133, 134,	/* P70-P77 */
+	135, 136, 137, 138, 139, 140,		/* P80-P85 */
+	43, 44, 45, 46, 47, 48, 49, 50,		/* PA0-PA7 */
+	51, 52, 53, 54, 55, 56, 57, 58,		/* PB0-PB7 */
+	59, 60,	61,				/* PC0-PC2 */
+	62, 63, 64, 65, 66, 67, 68, 69,		/* PD0-PD7 */
+	70, 71, 72, 73, 74, 75, 76, 77,		/* PE0-PE7 */
+	78, 79, 80,				/* PF0-PF2 */
+	25, 26, 27, 28, 29, 30, 31, 32,		/* PG0-PG7 */
+	33, 34, 35, 36, 37, 38,			/* PH0-PH5 */
+	4, 5, 6, 7, 8,				/* PJ0-PJ4 */
+	39, 40, 41, 42,				/* PK0-PK3 */
+	9, 10, 11, 12, 21, 22, 23, 24,		/* PL0-PL7 */
+	13, 14, 15, 16, 17, 18, 19, 20,		/* PM0-PM7 */
+	0, 1, 2, 3				/* PS0-PS3 */
+};
+
+static const struct rzv2h_hw_info rzg3e_hw_params = {
+	.tssel_lut	= rzg3e_tssel_lut,
+	.t_offs		= ICU_RZG3E_TINT_OFFSET,
+	.max_tssel	= ICU_RZG3E_TSSEL_MAX_VAL,
+	.field_width	= 16,
+};
+
 static const struct rzv2h_hw_info rzv2h_hw_params = {
 	.t_offs		= 0,
 	.max_tssel	= ICU_RZV2H_TSSEL_MAX_VAL,
 	.field_width	= 8,
 };
+
+static int rzg3e_icu_init(struct device_node *node, struct device_node *parent)
+{
+	return rzv2h_icu_init_common(node, parent, &rzg3e_hw_params);
+}
 
 static int rzv2h_icu_init(struct device_node *node, struct device_node *parent)
 {
···
 }
 
 IRQCHIP_PLATFORM_DRIVER_BEGIN(rzv2h_icu)
+IRQCHIP_MATCH("renesas,r9a09g047-icu", rzg3e_icu_init)
 IRQCHIP_MATCH("renesas,r9a09g057-icu", rzv2h_icu_init)
 IRQCHIP_PLATFORM_DRIVER_END(rzv2h_icu)
 MODULE_AUTHOR("Fabrizio Castro <[e-mail]>");