clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents

Both gpll6 and gpll7 are parented to CXO at 19.2 MHz and not to GPLL0
which runs at 600 MHz. Also gpll6_out_even should have the parent gpll6
and not gpll0.

Adjust the parents of these clocks to make Linux report the correct rate
and not absurd numbers like gpll7 at ~25 GHz or gpll6 at 24 GHz.

Corrected rates are the following:

gpll7 807999902 Hz
gpll6 768000000 Hz
gpll6_out_even 384000000 Hz
gpll0 600000000 Hz
gpll0_out_odd 200000000 Hz
gpll0_out_even 300000000 Hz

And because gpll6 is the parent of gcc_sdcc2_apps_clk_src (at 202 MHz)
that clock also reports the correct rate now and avoids this warning:

[ 5.984062] mmc0: Card appears overclocked; req 202000000 Hz, actual 6312499237 Hz

Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Bjorn Andersson <[e-mail]>

drivers/clk/qcom/gcc-sm6350.c

···
 		.enable_mask = BIT(6),
 		.hw.init = &(struct clk_init_data){
 			.name = "gpll6",
-			.parent_hws = (const struct clk_hw*[]){
-				&gpll0.clkr.hw,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
 			},
 			.num_parents = 1,
 			.ops = &clk_alpha_pll_fixed_fabia_ops,
···
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "gpll6_out_even",
 		.parent_hws = (const struct clk_hw*[]){
-			&gpll0.clkr.hw,
+			&gpll6.clkr.hw,
 		},
 		.num_parents = 1,
 		.ops = &clk_alpha_pll_postdiv_fabia_ops,
···
 		.enable_mask = BIT(7),
 		.hw.init = &(struct clk_init_data){
 			.name = "gpll7",
-			.parent_hws = (const struct clk_hw*[]){
-				&gpll0.clkr.hw,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
 			},
 			.num_parents = 1,
 			.ops = &clk_alpha_pll_fixed_fabia_ops,