Merge branch 'upstream-davem' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

Documentation/DocBook/z8530book.tmpl

···
 	device to be used as both a tty interface and as a synchronous 
 	controller is a project for Linux post the 2.4 release
   </para>
-  <para>
-	The support code handles most common card configurations and
-	supports running both Cisco HDLC and Synchronous PPP. With extra
-	glue the frame relay and X.25 protocols can also be used with this
-	driver.
-  </para>
   </chapter>
   
   <chapter id="Driver_Modes">
···
   <para>
 	If you wish to use the network interface facilities of the driver,
 	then you need to attach a network device to each channel that is
-	present and in use. In addition to use the SyncPPP and Cisco HDLC
+	present and in use. In addition to use the generic HDLC
 	you need to follow some additional plumbing rules. They may seem 
 	complex but a look at the example hostess_sv11 driver should
 	reassure you.
   </para>
   <para>
 	The network device used for each channel should be pointed to by
-	the netdevice field of each channel. The dev-&gt; priv field of the
+	the netdevice field of each channel. The hdlc-&gt; priv field of the
 	network device points to your private data - you will need to be
-	able to find your ppp device from this. In addition to use the
-	sync ppp layer the private data must start with a void * pointer
-	to the syncppp structures.
+	able to find your private data from this.
   </para>
   <para>
 	The way most drivers approach this particular problem is to
 	create a structure holding the Z8530 device definition and
-	put that and the syncppp pointer into the private field of
-	the network device. The network device fields of the channels
-	then point back to the network devices. The ppp_device can also
-	be put in the private structure conveniently.
+	put that into the private field of the network device. The
+	network device fields of the channels then point back to the
+	network devices.
   </para>
   <para>
-	If you wish to use the synchronous ppp then you need to attach
-	the syncppp layer to the network device. You should do this before
-	you register the network device. The
-	<function>sppp_attach</function> requires that the first void *
-	pointer in your private data is pointing to an empty struct
-	ppp_device. The function fills in the initial data for the
-	ppp/hdlc layer.
+	If you wish to use the generic HDLC then you need to register
+	the HDLC device.
   </para>
   <para>
 	Before you register your network device you will also need to
···
 	buffer in sk_buff format and queues it for transmission. The
 	caller must provide the entire packet with the exception of the
 	bitstuffing and CRC. This is normally done by the caller via
-	the syncppp interface layer. It returns 0 if the buffer has been 
-        queued and non zero values  for queue full. If the function accepts 
-	the buffer it becomes property of the Z8530 layer and the caller 
-	should not free it. 
+	the generic HDLC interface layer. It returns 0 if the buffer has been
+	queued and non zero values for queue full. If the function accepts
+	the buffer it becomes property of the Z8530 layer and the caller
+	should not free it.
   </para>
   <para>
 	The function <function>z8530_get_stats</function> returns a pointer

arch/sh/include/asm/sh_eth.h

···
+#ifndef __ASM_SH_ETH_H__
+#define __ASM_SH_ETH_H__
+
+enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
+
+struct sh_eth_plat_data {
+	int phy;
+	int edmac_endian;
+};
+
+#endif

drivers/char/pcmcia/synclink_cs.c

···
 
 	/* SPPP/Cisco HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
···
 
 static int debug_level = 0;
 static int maxframe[MAX_DEVICE_COUNT] = {0,};
-static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1};
 
 module_param(break_on_load, bool, 0);
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 MODULE_LICENSE("GPL");
 
···
 	if (info->line < MAX_DEVICE_COUNT) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	mgslpc_device_count++;

drivers/char/synclink.c

···
 
 	/* generic HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
···
 static int dma[MAX_ISA_DEVICES];
 static int debug_level;
 static int maxframe[MAX_TOTAL_DEVICES];
-static int dosyncppp[MAX_TOTAL_DEVICES];
 static int txdmabufs[MAX_TOTAL_DEVICES];
 static int txholdbufs[MAX_TOTAL_DEVICES];
 	
···
 module_param_array(dma, int, NULL, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 module_param_array(txdmabufs, int, NULL, 0);
 module_param_array(txholdbufs, int, NULL, 0);
 
···
 	if (info->line < MAX_TOTAL_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 
 		if (txdmabufs[info->line]) {
 			info->num_tx_dma_buffers = txdmabufs[info->line];

drivers/char/synclink_gt.c

···
 static int ttymajor;
 static int debug_level;
 static int maxframe[MAX_DEVICES];
-static int dosyncppp[MAX_DEVICES];
 
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
-MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable");
 
 /*
  * tty support and callbacks
···
 	/* SPPP/Cisco HDLC device parts */
 
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 #if SYNCLINK_GENERIC_HDLC
 	struct net_device *netdev;
···
 	if (info->line < MAX_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	slgt_device_count++;

drivers/char/synclinkmp.c

···
 
 	/* SPPP/Cisco HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
···
  */
 static int debug_level = 0;
 static int maxframe[MAX_DEVICES] = {0,};
-static int dosyncppp[MAX_DEVICES] = {0,};
 
 module_param(break_on_load, bool, 0);
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 static char *driver_name = "SyncLink MultiPort driver";
 static char *driver_version = "$Revision: 4.38 $";
···
 	if (info->line < MAX_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	synclinkmp_device_count++;

drivers/net/3c523.c

···
 	cfg_cmd->time_low = 0x00;
 	cfg_cmd->time_high = 0xf2;
 	cfg_cmd->promisc = 0;
-	if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC)) {
+	if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC))
 		cfg_cmd->promisc = 1;
-		dev->flags |= IFF_PROMISC;
-	}
 	cfg_cmd->carr_coll = 0x00;
 
 	p->scb->cbl_offset = make16(cfg_cmd);

drivers/net/3c527.c

···
 	struct mc32_local *lp = netdev_priv(dev);
 	u16 filt = (1<<2); /* Save Bad Packets, for stats purposes */
 
-	if (dev->flags&IFF_PROMISC)
+	if ((dev->flags&IFF_PROMISC) ||
+	    (dev->flags&IFF_ALLMULTI) ||
+	    dev->mc_count > 10)
 		/* Enable promiscuous mode */
 		filt |= 1;
-	else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > 10)
-	{
-		dev->flags|=IFF_PROMISC;
-		filt |= 1;
-	}
 	else if(dev->mc_count)
 	{
 		unsigned char block[62];

drivers/net/3c59x.c

···
 			vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
 			vp->rx_ring[i].status = 0;	/* Clear complete bit. */
 			vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG);
-			skb = dev_alloc_skb(PKT_BUF_SZ);
+
+			skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN,
+						 GFP_KERNEL);
 			vp->rx_skbuff[i] = skb;
 			if (skb == NULL)
 				break;			/* Bad news!  */
-			skb->dev = dev;			/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+
+			skb_reserve(skb, NET_IP_ALIGN);	/* Align IP on 16 byte boundaries */
 			vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 		}
 		if (i != RX_RING_SIZE) {
···
 		struct sk_buff *skb;
 		entry = vp->dirty_rx % RX_RING_SIZE;
 		if (vp->rx_skbuff[entry] == NULL) {
-			skb = dev_alloc_skb(PKT_BUF_SZ);
+			skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN);
 			if (skb == NULL) {
 				static unsigned long last_jif;
 				if (time_after(jiffies, last_jif + 10 * HZ)) {
···
 					mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1));
 				break;			/* Bad news!  */
 			}
-			skb->dev = dev;			/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+
+			skb_reserve(skb, NET_IP_ALIGN);
 			vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 			vp->rx_skbuff[entry] = skb;
 		}

drivers/net/8390.c

···
 {
 	return __ei_open(dev);
 }
+EXPORT_SYMBOL(ei_open);
 
 int ei_close(struct net_device *dev)
 {
 	return __ei_close(dev);
 }
+EXPORT_SYMBOL(ei_close);
 
 irqreturn_t ei_interrupt(int irq, void *dev_id)
 {
 	return __ei_interrupt(irq, dev_id);
 }
+EXPORT_SYMBOL(ei_interrupt);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void ei_poll(struct net_device *dev)
 {
 	__ei_poll(dev);
 }
+EXPORT_SYMBOL(ei_poll);
 #endif
 
 struct net_device *__alloc_ei_netdev(int size)
 {
 	return ____alloc_ei_netdev(size);
 }
+EXPORT_SYMBOL(__alloc_ei_netdev);
 
 void NS8390_init(struct net_device *dev, int startp)
 {
 	__NS8390_init(dev, startp);
 }
-
-EXPORT_SYMBOL(ei_open);
-EXPORT_SYMBOL(ei_close);
-EXPORT_SYMBOL(ei_interrupt);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-EXPORT_SYMBOL(ei_poll);
-#endif
 EXPORT_SYMBOL(NS8390_init);
-EXPORT_SYMBOL(__alloc_ei_netdev);
 
 #if defined(MODULE)
 

drivers/net/8390p.c

···
     "8390p.c:v1.10cvs 9/23/94 Donald Becker ([e-mail])\n";
 
 #define ei_inb(_p)	inb(_p)
-#define ei_outb(_v,_p)	outb(_v,_p)
+#define ei_outb(_v, _p)	outb(_v, _p)
 #define ei_inb_p(_p)	inb_p(_p)
-#define ei_outb_p(_v,_p) outb_p(_v,_p)
+#define ei_outb_p(_v, _p) outb_p(_v, _p)
 
 #include "lib8390.c"
 
···
 {
 	return __ei_open(dev);
 }
+EXPORT_SYMBOL(eip_open);
 
 int eip_close(struct net_device *dev)
 {
 	return __ei_close(dev);
 }
+EXPORT_SYMBOL(eip_close);
 
 irqreturn_t eip_interrupt(int irq, void *dev_id)
 {
 	return __ei_interrupt(irq, dev_id);
 }
+EXPORT_SYMBOL(eip_interrupt);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void eip_poll(struct net_device *dev)
 {
 	__ei_poll(dev);
 }
+EXPORT_SYMBOL(eip_poll);
 #endif
 
 struct net_device *__alloc_eip_netdev(int size)
 {
 	return ____alloc_ei_netdev(size);
 }
+EXPORT_SYMBOL(__alloc_eip_netdev);
 
 void NS8390p_init(struct net_device *dev, int startp)
 {
-	return __NS8390_init(dev, startp);
+	__NS8390_init(dev, startp);
 }
-
-EXPORT_SYMBOL(eip_open);
-EXPORT_SYMBOL(eip_close);
-EXPORT_SYMBOL(eip_interrupt);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-EXPORT_SYMBOL(eip_poll);
-#endif
 EXPORT_SYMBOL(NS8390p_init);
-EXPORT_SYMBOL(__alloc_eip_netdev);
 
 #if defined(MODULE)
 

drivers/net/Kconfig

···
 config SH_ETH
 	tristate "Renesas SuperH Ethernet support"
 	depends on SUPERH && \
-		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763)
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
+		 CPU_SUBTYPE_SH7619)
 	select CRC32
 	select MII
 	select MDIO_BITBANG
 	select PHYLIB
 	help
 	  Renesas SuperH Ethernet device driver.
-	  This driver support SH7710, SH7712 and SH7763.
+	  This driver support SH7710, SH7712, SH7763 and SH7619.
 
 config SUNLANCE
 	tristate "Sun LANCE support"

drivers/net/atlx/atl1.c

···
 {
 	struct pci_dev *pdev = adapter->pdev;
 
+	/*
+	 * The L1 hardware contains a bug that erroneously sets the
+	 * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a
+	 * fragmented IP packet is received, even though the packet
+	 * is perfectly valid and its checksum is correct. There's
+	 * no way to distinguish between one of these good packets
+	 * and a packet that actually contains a TCP/UDP checksum
+	 * error, so all we can do is allow it to be handed up to
+	 * the higher layers and let it be sorted out there.
+	 */
+
 	skb->ip_summed = CHECKSUM_NONE;
 
 	if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
···
 		return;
 	}
 
-	/* IPv4, but hardware thinks its checksum is wrong */
-	if (netif_msg_rx_err(adapter))
-		dev_printk(KERN_DEBUG, &pdev->dev,
-			"hw csum wrong, pkt_flag:%x, err_flag:%x\n",
-			rrd->pkt_flg, rrd->err_flg);
-	skb->ip_summed = CHECKSUM_COMPLETE;
-	skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum);
-	adapter->hw_csum_err++;
 	return;
 }
 

drivers/net/atp.c

···
 	struct net_local *lp = netdev_priv(dev);
 	long ioaddr = dev->base_addr;
 
-	if ( dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC))) {
-		/* We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. - AC
-		 */
-		dev->flags|=IFF_PROMISC;
+	if (dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC)))
 		lp->addr_mode = CMR2h_PROMISC;
-	} else
+	else
 		lp->addr_mode = CMR2h_Normal;
 	write_reg_high(ioaddr, CMR2, lp->addr_mode);
 }

drivers/net/bonding/bond_3ad.c

···
 			aggregator = __get_first_agg(port);
 			ad_agg_selection_logic(aggregator);
 		}
+		bond_3ad_set_carrier(bond);
 	}
 
 	// for each port run the state machines

drivers/net/bonding/bond_main.c

···
 
 /*-------------------------------- Monitoring -------------------------------*/
 
-/*
- * if !have_locks, return nonzero if a failover is necessary.  if
- * have_locks, do whatever failover activities are needed.
- *
- * This is to separate the inspection and failover steps for locking
- * purposes; failover requires rtnl, but acquiring it for every
- * inspection is undesirable, so a wrapper first does inspection, and
- * the acquires the necessary locks and calls again to perform
- * failover if needed.  Since all locks are dropped, a complete
- * restart is needed between calls.
- */
-static int __bond_mii_monitor(struct bonding *bond, int have_locks)
+
+static int bond_miimon_inspect(struct bonding *bond)
 {
-	struct slave *slave, *oldcurrent;
-	int do_failover = 0;
-	int i;
-
-	if (bond->slave_cnt == 0)
-		goto out;
-
-	/* we will try to read the link status of each of our slaves, and
-	 * set their IFF_RUNNING flag appropriately. For each slave not
-	 * supporting MII status, we won't do anything so that a user-space
-	 * program could monitor the link itself if needed.
-	 */
-
-	read_lock(&bond->curr_slave_lock);
-	oldcurrent = bond->curr_active_slave;
-	read_unlock(&bond->curr_slave_lock);
+	struct slave *slave;
+	int i, link_state, commit = 0;
 
 	bond_for_each_slave(bond, slave, i) {
-		struct net_device *slave_dev = slave->dev;
-		int link_state;
-		u16 old_speed = slave->speed;
-		u8 old_duplex = slave->duplex;
+		slave->new_link = BOND_LINK_NOCHANGE;
 
-		link_state = bond_check_dev_link(bond, slave_dev, 0);
+		link_state = bond_check_dev_link(bond, slave->dev, 0);
 
 		switch (slave->link) {
-		case BOND_LINK_UP:	/* the link was up */
-			if (link_state == BMSR_LSTATUS) {
-				if (!oldcurrent) {
-					if (!have_locks)
-						return 1;
-					do_failover = 1;
-				}
-				break;
-			} else { /* link going down */
-				slave->link  = BOND_LINK_FAIL;
-				slave->delay = bond->params.downdelay;
+		case BOND_LINK_UP:
+			if (link_state)
+				continue;
 
-				if (slave->link_failure_count < UINT_MAX) {
-					slave->link_failure_count++;
-				}
-
-				if (bond->params.downdelay) {
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status down for %s "
-					       "interface %s, disabling it in "
-					       "%d ms.\n",
-					       bond->dev->name,
-					       IS_UP(slave_dev)
-					       ? ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
-						  ? ((slave == oldcurrent)
-						     ? "active " : "backup ")
-						  : "")
-					       : "idle ",
-					       slave_dev->name,
-					       bond->params.downdelay * bond->params.miimon);
-				}
+			slave->link = BOND_LINK_FAIL;
+			slave->delay = bond->params.downdelay;
+			if (slave->delay) {
+				printk(KERN_INFO DRV_NAME
+				       ": %s: link status down for %s"
+				       "interface %s, disabling it in %d ms.\n",
+				       bond->dev->name,
+				       (bond->params.mode ==
+					BOND_MODE_ACTIVEBACKUP) ?
+				       ((slave->state == BOND_STATE_ACTIVE) ?
+					"active " : "backup ") : "",
+				       slave->dev->name,
+				       bond->params.downdelay * bond->params.miimon);
 			}
-			/* no break ! fall through the BOND_LINK_FAIL test to
-			   ensure proper action to be taken
-			*/
-		case BOND_LINK_FAIL:	/* the link has just gone down */
-			if (link_state != BMSR_LSTATUS) {
-				/* link stays down */
-				if (slave->delay <= 0) {
-					if (!have_locks)
-						return 1;
-
-					/* link down for too long time */
-					slave->link = BOND_LINK_DOWN;
-
-					/* in active/backup mode, we must
-					 * completely disable this interface
-					 */
-					if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) ||
-					    (bond->params.mode == BOND_MODE_8023AD)) {
-						bond_set_slave_inactive_flags(slave);
-					}
-
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status definitely "
-					       "down for interface %s, "
-					       "disabling it\n",
-					       bond->dev->name,
-					       slave_dev->name);
-
-					/* notify ad that the link status has changed */
-					if (bond->params.mode == BOND_MODE_8023AD) {
-						bond_3ad_handle_link_change(slave, BOND_LINK_DOWN);
-					}
-
-					if ((bond->params.mode == BOND_MODE_TLB) ||
-					    (bond->params.mode == BOND_MODE_ALB)) {
-						bond_alb_handle_link_change(bond, slave, BOND_LINK_DOWN);
-					}
-
-					if (slave == oldcurrent) {
-						do_failover = 1;
-					}
-				} else {
-					slave->delay--;
-				}
-			} else {
-				/* link up again */
-				slave->link  = BOND_LINK_UP;
+			/*FALLTHRU*/
+		case BOND_LINK_FAIL:
+			if (link_state) {
+				/*
+				 * recovered before downdelay expired
+				 */
+				slave->link = BOND_LINK_UP;
 				slave->jiffies = jiffies;
 				printk(KERN_INFO DRV_NAME
 				       ": %s: link status up again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
-				       (bond->params.downdelay - slave->delay) * bond->params.miimon,
-				       slave_dev->name);
+				       (bond->params.downdelay - slave->delay) *
+				       bond->params.miimon,
+				       slave->dev->name);
+				continue;
 			}
+
+			if (slave->delay <= 0) {
+				slave->new_link = BOND_LINK_DOWN;
+				commit++;
+				continue;
+			}
+
+			slave->delay--;
 			break;
-		case BOND_LINK_DOWN:	/* the link was down */
-			if (link_state != BMSR_LSTATUS) {
-				/* the link stays down, nothing more to do */
-				break;
-			} else {	/* link going up */
-				slave->link  = BOND_LINK_BACK;
-				slave->delay = bond->params.updelay;
 
-				if (bond->params.updelay) {
-					/* if updelay == 0, no need to
-					   advertise about a 0 ms delay */
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status up for "
-					       "interface %s, enabling it "
-					       "in %d ms.\n",
-					       bond->dev->name,
-					       slave_dev->name,
-					       bond->params.updelay * bond->params.miimon);
-				}
+		case BOND_LINK_DOWN:
+			if (!link_state)
+				continue;
+
+			slave->link = BOND_LINK_BACK;
+			slave->delay = bond->params.updelay;
+
+			if (slave->delay) {
+				printk(KERN_INFO DRV_NAME
+				       ": %s: link status up for "
+				       "interface %s, enabling it in %d ms.\n",
+				       bond->dev->name, slave->dev->name,
+				       bond->params.updelay *
+				       bond->params.miimon);
 			}
-			/* no break ! fall through the BOND_LINK_BACK state in
-			   case there's something to do.
-			*/
-		case BOND_LINK_BACK:	/* the link has just come back */
-			if (link_state != BMSR_LSTATUS) {
-				/* link down again */
-				slave->link  = BOND_LINK_DOWN;
-
+			/*FALLTHRU*/
+		case BOND_LINK_BACK:
+			if (!link_state) {
+				slave->link = BOND_LINK_DOWN;
 				printk(KERN_INFO DRV_NAME
 				       ": %s: link status down again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
-				       (bond->params.updelay - slave->delay) * bond->params.miimon,
-				       slave_dev->name);
-			} else {
-				/* link stays up */
-				if (slave->delay == 0) {
-					if (!have_locks)
-						return 1;
+				       (bond->params.updelay - slave->delay) *
+				       bond->params.miimon,
+				       slave->dev->name);
 
-					/* now the link has been up for long time enough */
-					slave->link = BOND_LINK_UP;
-					slave->jiffies = jiffies;
-
-					if (bond->params.mode == BOND_MODE_8023AD) {
-						/* prevent it from being the active one */
-						slave->state = BOND_STATE_BACKUP;
-					} else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
-						/* make it immediately active */
-						slave->state = BOND_STATE_ACTIVE;
-					} else if (slave != bond->primary_slave) {
-						/* prevent it from being the active one */
-						slave->state = BOND_STATE_BACKUP;
-					}
-
-					printk(KERN_INFO DRV_NAME
-					       ": %s: link status definitely "
-					       "up for interface %s.\n",
-					       bond->dev->name,
-					       slave_dev->name);
-
-					/* notify ad that the link status has changed */
-					if (bond->params.mode == BOND_MODE_8023AD) {
-						bond_3ad_handle_link_change(slave, BOND_LINK_UP);
-					}
-
-					if ((bond->params.mode == BOND_MODE_TLB) ||
-					    (bond->params.mode == BOND_MODE_ALB)) {
-						bond_alb_handle_link_change(bond, slave, BOND_LINK_UP);
-					}
-
-					if ((!oldcurrent) ||
-					    (slave == bond->primary_slave)) {
-						do_failover = 1;
-					}
-				} else {
-					slave->delay--;
-				}
+				continue;
 			}
+
+			if (slave->delay <= 0) {
+				slave->new_link = BOND_LINK_UP;
+				commit++;
+				continue;
+			}
+
+			slave->delay--;
 			break;
+		}
+	}
+
+	return commit;
+}
+
+static void bond_miimon_commit(struct bonding *bond)
+{
+	struct slave *slave;
+	int i;
+
+	bond_for_each_slave(bond, slave, i) {
+		switch (slave->new_link) {
+		case BOND_LINK_NOCHANGE:
+			continue;
+
+		case BOND_LINK_UP:
+			slave->link = BOND_LINK_UP;
+			slave->jiffies = jiffies;
+
+			if (bond->params.mode == BOND_MODE_8023AD) {
+				/* prevent it from being the active one */
+				slave->state = BOND_STATE_BACKUP;
+			} else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
+				/* make it immediately active */
+				slave->state = BOND_STATE_ACTIVE;
+			} else if (slave != bond->primary_slave) {
+				/* prevent it from being the active one */
+				slave->state = BOND_STATE_BACKUP;
+			}
+
+			printk(KERN_INFO DRV_NAME
+			       ": %s: link status definitely "
+			       "up for interface %s.\n",
+			       bond->dev->name, slave->dev->name);
+
+			/* notify ad that the link status has changed */
+			if (bond->params.mode == BOND_MODE_8023AD)
+				bond_3ad_handle_link_change(slave, BOND_LINK_UP);
+
+			if ((bond->params.mode == BOND_MODE_TLB) ||
+			    (bond->params.mode == BOND_MODE_ALB))
+				bond_alb_handle_link_change(bond, slave,
+							    BOND_LINK_UP);
+
+			if (!bond->curr_active_slave ||
+			    (slave == bond->primary_slave))
+				goto do_failover;
+
+			continue;
+
+		case BOND_LINK_DOWN:
+			slave->link = BOND_LINK_DOWN;
+
+			if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
+			    bond->params.mode == BOND_MODE_8023AD)
+				bond_set_slave_inactive_flags(slave);
+
+			printk(KERN_INFO DRV_NAME
+			       ": %s: link status definitely down for "
+			       "interface %s, disabling it\n",
+			       bond->dev->name, slave->dev->name);
+
+			if (bond->params.mode == BOND_MODE_8023AD)
+				bond_3ad_handle_link_change(slave,
+							    BOND_LINK_DOWN);
+
+			if (bond->params.mode == BOND_MODE_TLB ||
+			    bond->params.mode == BOND_MODE_ALB)
+				bond_alb_handle_link_change(bond, slave,
+							    BOND_LINK_DOWN);
+
+			if (slave == bond->curr_active_slave)
+				goto do_failover;
+
+			continue;
+
 		default:
-			/* Should not happen */
 			printk(KERN_ERR DRV_NAME
-			       ": %s: Error: %s Illegal value (link=%d)\n",
-			       bond->dev->name,
-			       slave->dev->name,
-			       slave->link);
-			goto out;
-		} /* end of switch (slave->link) */
+			       ": %s: invalid new link %d on slave %s\n",
+			       bond->dev->name, slave->new_link,
+			       slave->dev->name);
+			slave->new_link = BOND_LINK_NOCHANGE;
 
-		bond_update_speed_duplex(slave);
-
-		if (bond->params.mode == BOND_MODE_8023AD) {
-			if (old_speed != slave->speed) {
-				bond_3ad_adapter_speed_changed(slave);
-			}
-
-			if (old_duplex != slave->duplex) {
-				bond_3ad_adapter_duplex_changed(slave);
-			}
+			continue;
 		}
 
-	} /* end of for */
-
-	if (do_failover) {
+do_failover:
 		ASSERT_RTNL();
-
 		write_lock_bh(&bond->curr_slave_lock);
-
 		bond_select_active_slave(bond);
-
 		write_unlock_bh(&bond->curr_slave_lock);
+	}
 
-	} else
-		bond_set_carrier(bond);
-
-out:
-	return 0;
+	bond_set_carrier(bond);
 }
 
 /*
  * bond_mii_monitor
  *
  * Really a wrapper that splits the mii monitor into two phases: an
- * inspection, then (if inspection indicates something needs to be
- * done) an acquisition of appropriate locks followed by another pass
- * to implement whatever link state changes are indicated.
+ * inspection, then (if inspection indicates something needs to be done)
+ * an acquisition of appropriate locks followed by a commit phase to
+ * implement whatever link state changes are indicated.
  */
 void bond_mii_monitor(struct work_struct *work)
 {
 	struct bonding *bond = container_of(work, struct bonding,
 					    mii_work.work);
-	unsigned long delay;
 
 	read_lock(&bond->lock);
-	if (bond->kill_timers) {
-		read_unlock(&bond->lock);
-		return;
-	}
+	if (bond->kill_timers)
+		goto out;
+
+	if (bond->slave_cnt == 0)
+		goto re_arm;
 
 	if (bond->send_grat_arp) {
 		read_lock(&bond->curr_slave_lock);
···
 		read_unlock(&bond->curr_slave_lock);
 	}
 
-	if (__bond_mii_monitor(bond, 0)) {
+	if (bond_miimon_inspect(bond)) {
 		read_unlock(&bond->lock);
 		rtnl_lock();
 		read_lock(&bond->lock);
-		__bond_mii_monitor(bond, 1);
+
+		bond_miimon_commit(bond);
+
 		read_unlock(&bond->lock);
 		rtnl_unlock();	/* might sleep, hold no other locks */
 		read_lock(&bond->lock);
 	}
 
-	delay = msecs_to_jiffies(bond->params.miimon);
+re_arm:
+	if (bond->params.miimon)
+		queue_delayed_work(bond->wq, &bond->mii_work,
+				   msecs_to_jiffies(bond->params.miimon));
+out:
 	read_unlock(&bond->lock);
-	queue_delayed_work(bond->wq, &bond->mii_work, delay);
 }
 
 static __be32 bond_glean_dev_ip(struct net_device *dev)

drivers/net/bonding/bond_sysfs.c

···
 		if (dev) {
 			printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n",
 				bond->dev->name, dev->name);
-			if (bond->setup_by_slave)
-				res = bond_release_and_destroy(bond->dev, dev);
-			else
 				res = bond_release(bond->dev, dev);
 			if (res) {
 				ret = res;

drivers/net/de620.c

···
 {
 	if (dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
 	{ /* Enable promiscuous mode */
-		/*
-		 *	We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. - AC
-		 */
-		dev->flags|=IFF_PROMISC;
-
 		de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL);
 	}
 	else

drivers/net/dm9000.c

···
 	for (i = 0; i < 6; i += 2)
 		dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
 
+	if (!is_valid_ether_addr(ndev->dev_addr) && pdata != NULL) {
+		mac_src = "platform data";
+		memcpy(ndev->dev_addr, pdata->dev_addr, 6);
+	}
+
 	if (!is_valid_ether_addr(ndev->dev_addr)) {
 		/* try reading from mac */
 		

drivers/net/e1000e/e1000.h

···
 
 struct e1000_info;
 
-#define ndev_printk(level, netdev, format, arg...) \
-	printk(level "%s: " format, (netdev)->name, ## arg)
+#define e_printk(level, adapter, format, arg...) \
+	printk(level "%s: %s: " format, pci_name(adapter->pdev), \
+	       adapter->netdev->name, ## arg)
 
 #ifdef DEBUG
-#define ndev_dbg(netdev, format, arg...) \
-	ndev_printk(KERN_DEBUG , netdev, format, ## arg)
+#define e_dbg(format, arg...) \
+	e_printk(KERN_DEBUG , adapter, format, ## arg)
 #else
-#define ndev_dbg(netdev, format, arg...) do { (void)(netdev); } while (0)
+#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
 #endif
 
-#define ndev_err(netdev, format, arg...) \
-	ndev_printk(KERN_ERR , netdev, format, ## arg)
-#define ndev_info(netdev, format, arg...) \
-	ndev_printk(KERN_INFO , netdev, format, ## arg)
-#define ndev_warn(netdev, format, arg...) \
-	ndev_printk(KERN_WARNING , netdev, format, ## arg)
-#define ndev_notice(netdev, format, arg...) \
-	ndev_printk(KERN_NOTICE , netdev, format, ## arg)
+#define e_err(format, arg...) \
+	e_printk(KERN_ERR, adapter, format, ## arg)
+#define e_info(format, arg...) \
+	e_printk(KERN_INFO, adapter, format, ## arg)
+#define e_warn(format, arg...) \
+	e_printk(KERN_WARNING, adapter, format, ## arg)
+#define e_notice(format, arg...) \
+	e_printk(KERN_NOTICE, adapter, format, ## arg)
 
 
 /* Tx/Rx descriptor defines */
···
 	unsigned long led_status;
 
 	unsigned int flags;
-
-	/* for ioport free */
-	int bars;
-	int need_ioport;
 };
 
 struct e1000_info {

drivers/net/e1000e/ethtool.c

···
 	/* Fiber NICs only allow 1000 gbps Full duplex */
 	if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
 		spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-		ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
-			 "configuration\n");
+		e_err("Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
 	}
 
···
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 	default:
-		ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
-			 "configuration\n");
+		e_err("Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
 	}
 	return 0;
···
 	 * cannot be changed
 	 */
 	if (e1000_check_reset_block(hw)) {
-		ndev_err(netdev, "Cannot change link "
-			 "characteristics when SoL/IDER is active.\n");
+		e_err("Cannot change link characteristics when SoL/IDER is "
+		      "active.\n");
 		return -EINVAL;
 	}
 
···
 		netdev->features &= ~NETIF_F_TSO6;
 	}
 
-	ndev_info(netdev, "TSO is %s\n",
-		  data ? "Enabled" : "Disabled");
+	e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
 	adapter->flags |= FLAG_TSO_FORCE;
 	return 0;
 }
···
 				      (test[pat] & write));
 		val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
 		if (val != (test[pat] & write & mask)) {
-			ndev_err(adapter->netdev, "pattern test reg %04X "
-				 "failed: got 0x%08X expected 0x%08X\n",
-				 reg + offset,
-				 val, (test[pat] & write & mask));
+			e_err("pattern test reg %04X failed: got 0x%08X "
+			      "expected 0x%08X\n", reg + offset, val,
+			      (test[pat] & write & mask));
 			*data = reg;
 			return 1;
 		}
···
 	__ew32(&adapter->hw, reg, write & mask);
 	val = __er32(&adapter->hw, reg);
 	if ((write & mask) != (val & mask)) {
-		ndev_err(adapter->netdev, "set/check reg %04X test failed: "
-			 "got 0x%08X expected 0x%08X\n", reg, (val & mask),
-			 (write & mask));
+		e_err("set/check reg %04X test failed: got 0x%08X "
+		      "expected 0x%08X\n", reg, (val & mask), (write & mask));
 		*data = reg;
 		return 1;
 	}
···
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
-	struct net_device *netdev = adapter->netdev;
 	u32 value;
 	u32 before;
 	u32 after;
···
 	ew32(STATUS, toggle);
 	after = er32(STATUS) & toggle;
 	if (value != after) {
-		ndev_err(netdev, "failed STATUS register test got: "
-			 "0x%08X expected: 0x%08X\n", after, value);
+		e_err("failed STATUS register test got: 0x%08X expected: "
+		      "0x%08X\n", after, value);
 		*data = 1;
 		return 1;
 	}
···
 		*data = 1;
 		return -1;
 	}
-	ndev_info(netdev, "testing %s interrupt\n",
-		  (shared_int ? "shared" : "unshared"));
+	e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
···
 	 * sessions are active
 	 */
 	if (e1000_check_reset_block(&adapter->hw)) {
-		ndev_err(adapter->netdev, "Cannot do PHY loopback test "
-			 "when SoL/IDER is active.\n");
+		e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
 		*data = 0;
 		goto out;
 	}
···
 		forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
 		autoneg = adapter->hw.mac.autoneg;
 
-		ndev_info(netdev, "offline testing starting\n");
+		e_info("offline testing starting\n");
 
 		/*
 		 * Link test performed before hardware reset so autoneg doesn't
···
 		if (if_running)
 			dev_open(netdev);
 	} else {
-		ndev_info(netdev, "online testing starting\n");
+		e_info("online testing starting\n");
 		/* Online tests */
 		if (e1000_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
···
 		wol->supported &= ~WAKE_UCAST;
 
 		if (adapter->wol & E1000_WUFC_EX)
-			ndev_err(netdev, "Interface does not support "
-				 "directed (unicast) frame wake-up packets\n");
+			e_err("Interface does not support directed (unicast) "
+			      "frame wake-up packets\n");
 	}
 
 	if (adapter->wol & E1000_WUFC_EX)

drivers/net/e1000e/netdev.c

···
 		 * packet, also make sure the frame isn't just CRC only */
 		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
 			/* All receives must fit into a single buffer */
-			ndev_dbg(netdev, "%s: Receive packet consumed "
-				 "multiple buffers\n", netdev->name);
+			e_dbg("%s: Receive packet consumed multiple buffers\n",
+			      netdev->name);
 			/* recycle */
 			buffer_info->skb = skb;
 			goto next_desc;
···
 	unsigned int i = tx_ring->next_to_clean;
 	unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
 	struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
-	struct net_device *netdev = adapter->netdev;
 
 	/* detected Tx unit hang */
-	ndev_err(netdev,
-		 "Detected Tx Unit Hang:\n"
-		 "  TDH                  <%x>\n"
-		 "  TDT                  <%x>\n"
-		 "  next_to_use          <%x>\n"
-		 "  next_to_clean        <%x>\n"
-		 "buffer_info[next_to_clean]:\n"
-		 "  time_stamp           <%lx>\n"
-		 "  next_to_watch        <%x>\n"
-		 "  jiffies              <%lx>\n"
-		 "  next_to_watch.status <%x>\n",
-		 readl(adapter->hw.hw_addr + tx_ring->head),
-		 readl(adapter->hw.hw_addr + tx_ring->tail),
-		 tx_ring->next_to_use,
-		 tx_ring->next_to_clean,
-		 tx_ring->buffer_info[eop].time_stamp,
-		 eop,
-		 jiffies,
-		 eop_desc->upper.fields.status);
+	e_err("Detected Tx Unit Hang:\n"
+	      "  TDH                  <%x>\n"
+	      "  TDT                  <%x>\n"
+	      "  next_to_use          <%x>\n"
+	      "  next_to_clean        <%x>\n"
+	      "buffer_info[next_to_clean]:\n"
+	      "  time_stamp           <%lx>\n"
+	      "  next_to_watch        <%x>\n"
+	      "  jiffies              <%lx>\n"
+	      "  next_to_watch.status <%x>\n",
+	      readl(adapter->hw.hw_addr + tx_ring->head),
+	      readl(adapter->hw.hw_addr + tx_ring->tail),
+	      tx_ring->next_to_use,
+	      tx_ring->next_to_clean,
+	      tx_ring->buffer_info[eop].time_stamp,
+	      eop,
+	      jiffies,
+	      eop_desc->upper.fields.status);
 }
 
 /**
···
 		buffer_info->dma = 0;
 
 		if (!(staterr & E1000_RXD_STAT_EOP)) {
-			ndev_dbg(netdev, "%s: Packet Split buffers didn't pick "
-				 "up the full packet\n", netdev->name);
+			e_dbg("%s: Packet Split buffers didn't pick up the "
+			      "full packet\n", netdev->name);
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
···
 		length = le16_to_cpu(rx_desc->wb.middle.length0);
 
 		if (!length) {
-			ndev_dbg(netdev, "%s: Last part of the packet spanning"
-				 " multiple descriptors\n", netdev->name);
+			e_dbg("%s: Last part of the packet spanning multiple "
+			      "descriptors\n", netdev->name);
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
···
 
 		/* eth type trans needs skb->data to point to something */
 		if (!pskb_may_pull(skb, ETH_HLEN)) {
-			ndev_err(netdev, "pskb_may_pull failed.\n");
+			e_err("pskb_may_pull failed.\n");
 			dev_kfree_skb(skb);
 			goto next_desc;
 		}
···
 	err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
 			  netdev);
 	if (err) {
-		ndev_err(netdev,
-		       "Unable to allocate %s interrupt (return: %d)\n",
-			adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
-			err);
+		e_err("Unable to allocate %s interrupt (return: %d)\n",
+		      adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",	err);
 		if (adapter->flags & FLAG_MSI_ENABLED)
 			pci_disable_msi(adapter->pdev);
 	}
···
 	return 0;
 err:
 	vfree(tx_ring->buffer_info);
-	ndev_err(adapter->netdev,
-	"Unable to allocate memory for the transmit descriptor ring\n");
+	e_err("Unable to allocate memory for the transmit descriptor ring\n");
 	return err;
 }
 
···
 	}
 err:
 	vfree(rx_ring->buffer_info);
-	ndev_err(adapter->netdev,
-	"Unable to allocate memory for the transmit descriptor ring\n");
+	e_err("Unable to allocate memory for the transmit descriptor ring\n");
 	return err;
 }
 
···
 	 * For parts with AMT enabled, let the firmware know
 	 * that the network interface is in control
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_get_hw_control(adapter);
 
 	ew32(WUC, 0);
 
 	if (mac->ops.init_hw(hw))
-		ndev_err(adapter->netdev, "Hardware Error\n");
+		e_err("Hardware Error\n");
 
 	e1000_update_mng_vlan(adapter);
 
···
 	return 0;
 
 err:
-	ndev_err(netdev, "Unable to allocate memory for queues\n");
+	e_err("Unable to allocate memory for queues\n");
 	kfree(adapter->rx_ring);
 	kfree(adapter->tx_ring);
 	return -ENOMEM;
···
 	 * If AMT is enabled, let the firmware know that the network
 	 * interface is now open
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) &&
-	    e1000e_check_mng_mode(&adapter->hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_get_hw_control(adapter);
 
 	/*
···
 	 * If AMT is enabled, let the firmware know that the network
 	 * interface is now closed
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) &&
-	    e1000e_check_mng_mode(&adapter->hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_release_hw_control(adapter);
 
 	return 0;
···
 		ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
 		ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
 		if (ret_val)
-			ndev_warn(adapter->netdev,
-				  "Error reading PHY register\n");
+			e_warn("Error reading PHY register\n");
 	} else {
 		/*
 		 * Do not read PHY registers if link is not up
···
 static void e1000_print_link_info(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	struct net_device *netdev = adapter->netdev;
 	u32 ctrl = er32(CTRL);
 
-	ndev_info(netdev,
-		"Link is Up %d Mbps %s, Flow Control: %s\n",
-		adapter->link_speed,
-		(adapter->link_duplex == FULL_DUPLEX) ?
-				"Full Duplex" : "Half Duplex",
-		((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
-				"RX/TX" :
-		((ctrl & E1000_CTRL_RFCE) ? "RX" :
-		((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+	e_info("Link is Up %d Mbps %s, Flow Control: %s\n",
+	       adapter->link_speed,
+	       (adapter->link_duplex == FULL_DUPLEX) ?
+	                        "Full Duplex" : "Half Duplex",
+	       ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
+	                        "RX/TX" :
+	       ((ctrl & E1000_CTRL_RFCE) ? "RX" :
+	       ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
 }
 
 static bool e1000_has_link(struct e1000_adapter *adapter)
···
 	if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
 	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
 		/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
-		ndev_info(adapter->netdev,
-			  "Gigabit has been disabled, downgrading speed\n");
+		e_info("Gigabit has been disabled, downgrading speed\n");
 	}
 
 	return link_active;
···
 				switch (adapter->link_speed) {
 				case SPEED_10:
 				case SPEED_100:
-					ndev_info(netdev,
-					"10/100 speed: disabling TSO\n");
+					e_info("10/100 speed: disabling TSO\n");
 					netdev->features &= ~NETIF_F_TSO;
 					netdev->features &= ~NETIF_F_TSO6;
 					break;
···
 		if (netif_carrier_ok(netdev)) {
 			adapter->link_speed = 0;
 			adapter->link_duplex = 0;
-			ndev_info(netdev, "Link is Down\n");
+			e_info("Link is Down\n");
 			netif_carrier_off(netdev);
 			netif_tx_stop_all_queues(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
···
 
 			pull_size = min((unsigned int)4, skb->data_len);
 			if (!__pskb_pull_tail(skb, pull_size)) {
-				ndev_err(netdev,
-					 "__pskb_pull_tail failed.\n");
+				e_err("__pskb_pull_tail failed.\n");
 				dev_kfree_skb_any(skb);
 				return NETDEV_TX_OK;
 			}
···
 
 	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
 	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		ndev_err(netdev, "Invalid MTU setting\n");
+		e_err("Invalid MTU setting\n");
 		return -EINVAL;
 	}
 
 	/* Jumbo frame size limits */
 	if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
 		if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-			ndev_err(netdev, "Jumbo Frames not supported.\n");
+			e_err("Jumbo Frames not supported.\n");
 			return -EINVAL;
 		}
 		if (adapter->hw.phy.type == e1000_phy_ife) {
-			ndev_err(netdev, "Jumbo Frames not supported.\n");
+			e_err("Jumbo Frames not supported.\n");
 			return -EINVAL;
 		}
 	}
 
 #define MAX_STD_JUMBO_FRAME_SIZE 9234
 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-		ndev_err(netdev, "MTU > 9216 not supported.\n");
+		e_err("MTU > 9216 not supported.\n");
 		return -EINVAL;
 	}
 
···
 		adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
 					 + ETH_FCS_LEN;
 
-	ndev_info(netdev, "changing MTU from %d to %d\n",
-		netdev->mtu, new_mtu);
+	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
 
 	if (netif_running(netdev))
···
 	pci_restore_state(pdev);
 	e1000e_disable_l1aspm(pdev);
 
-	if (adapter->need_ioport)
-		err = pci_enable_device(pdev);
-	else
-		err = pci_enable_device_mem(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot enable PCI device from suspend\n");
···
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 	return 0;
···
 	int err;
 
 	e1000e_disable_l1aspm(pdev);
-	if (adapter->need_ioport)
-		err = pci_enable_device(pdev);
-	else
-		err = pci_enable_device_mem(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot re-enable PCI device after reset.\n");
···
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) ||
-	    !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 }
···
 	u32 pba_num;
 
 	/* print bus type/speed/width info */
-	ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
-		  "%02x:%02x:%02x:%02x:%02x:%02x\n",
-		  /* bus width */
-		 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
-		  "Width x1"),
-		  /* MAC address */
-		  netdev->dev_addr[0], netdev->dev_addr[1],
-		  netdev->dev_addr[2], netdev->dev_addr[3],
-		  netdev->dev_addr[4], netdev->dev_addr[5]);
-	ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
-		  (hw->phy.type == e1000_phy_ife)
-		   ? "10/100" : "1000");
+	e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
+	       /* bus width */
+	       ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+	        "Width x1"),
+	       /* MAC address */
+	       netdev->dev_addr[0], netdev->dev_addr[1],
+	       netdev->dev_addr[2], netdev->dev_addr[3],
+	       netdev->dev_addr[4], netdev->dev_addr[5]);
+	e_info("Intel(R) PRO/%s Network Connection\n",
+	       (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
 	e1000e_read_pba_num(hw, &pba_num);
-	ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
-		  hw->mac.type, hw->phy.type,
-		  (pba_num >> 8), (pba_num & 0xff));
+	e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+	       hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
 }
 
-/**
- * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
- * @pdev: PCI device information struct
- *
- * Returns true if an adapters needs ioport resources
- **/
-static int e1000e_is_need_ioport(struct pci_dev *pdev)
+static void e1000_eeprom_checks(struct e1000_adapter *adapter)
 {
-	switch (pdev->device) {
-	/* Currently there are no adapters that need ioport resources */
-	default:
-		return false;
+	struct e1000_hw *hw = &adapter->hw;
+	int ret_val;
+	u16 buf = 0;
+
+	if (hw->mac.type != e1000_82573)
+		return;
+
+	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
+	if (!(le16_to_cpu(buf) & (1 << 0))) {
+		/* Deep Smart Power Down (DSPD) */
+		e_warn("Warning: detected DSPD enabled in EEPROM\n");
+	}
+
+	ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
+	if (le16_to_cpu(buf) & (3 << 2)) {
+		/* ASPM enable */
+		e_warn("Warning: detected ASPM enabled in EEPROM\n");
 	}
 }
 
···
 	int i, err, pci_using_dac;
 	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
-	int bars, need_ioport;
 
 	e1000e_disable_l1aspm(pdev);
 
-	/* do not allocate ioport bars when not needed */
-	need_ioport = e1000e_is_need_ioport(pdev);
-	if (need_ioport) {
-		bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
-		err = pci_enable_device(pdev);
-	} else {
-		bars = pci_select_bars(pdev, IORESOURCE_MEM);
-		err = pci_enable_device_mem(pdev);
-	}
+	err = pci_enable_device_mem(pdev);
 	if (err)
 		return err;
 
···
 		}
 	}
 
-	err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
+	err = pci_request_selected_regions(pdev,
+	                                  pci_select_bars(pdev, IORESOURCE_MEM),
+	                                  e1000e_driver_name);
 	if (err)
 		goto err_pci_reg;
 
···
 	adapter->hw.adapter = adapter;
 	adapter->hw.mac.type = ei->mac;
 	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
-	adapter->bars = bars;
-	adapter->need_ioport = need_ioport;
 
 	mmio_start = pci_resource_start(pdev, 0);
 	mmio_len = pci_resource_len(pdev, 0);
···
 	}
 
 	if (e1000_check_reset_block(&adapter->hw))
-		ndev_info(netdev,
-			  "PHY reset is blocked due to SOL/IDER session.\n");
+		e_info("PHY reset is blocked due to SOL/IDER session.\n");
 
 	netdev->features = NETIF_F_SG |
 			   NETIF_F_HW_CSUM |
···
 		if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
 			break;
 		if (i == 2) {
-			ndev_err(netdev, "The NVM Checksum Is Not Valid\n");
+			e_err("The NVM Checksum Is Not Valid\n");
 			err = -EIO;
 			goto err_eeprom;
 		}
 	}
 
+	e1000_eeprom_checks(adapter);
+
 	/* copy the MAC address out of the NVM */
 	if (e1000e_read_mac_addr(&adapter->hw))
-		ndev_err(netdev, "NVM Read Error while reading MAC address\n");
+		e_err("NVM Read Error while reading MAC address\n");
 
 	memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
 	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
 
 	if (!is_valid_ether_addr(netdev->perm_addr)) {
-		ndev_err(netdev, "Invalid MAC Address: "
-			 "%02x:%02x:%02x:%02x:%02x:%02x\n",
-			 netdev->perm_addr[0], netdev->perm_addr[1],
-			 netdev->perm_addr[2], netdev->perm_addr[3],
-			 netdev->perm_addr[4], netdev->perm_addr[5]);
+		e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+		      netdev->perm_addr[0], netdev->perm_addr[1],
+		      netdev->perm_addr[2], netdev->perm_addr[3],
+		      netdev->perm_addr[4], netdev->perm_addr[5]);
 		err = -EIO;
 		goto err_eeprom;
 	}
···
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) ||
-	    !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 	/* tell the stack to leave us alone until e1000_open() is called */
···
 	return 0;
 
 err_register:
-err_hw_init:
-	e1000_release_hw_control(adapter);
+	if (!(adapter->flags & FLAG_HAS_AMT))
+		e1000_release_hw_control(adapter);
 err_eeprom:
 	if (!e1000_check_reset_block(&adapter->hw))
 		e1000_phy_hw_reset(&adapter->hw);
+err_hw_init:
 
-	if (adapter->hw.flash_address)
-		iounmap(adapter->hw.flash_address);
-
-err_flashmap:
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 err_sw_init:
+	if (adapter->hw.flash_address)
+		iounmap(adapter->hw.flash_address);
+err_flashmap:
 	iounmap(adapter->hw.hw_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev, bars);
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
···
 	iounmap(adapter->hw.hw_addr);
 	if (adapter->hw.flash_address)
 		iounmap(adapter->hw.flash_address);
-	pci_release_selected_regions(pdev, adapter->bars);
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 
 	free_netdev(netdev);
 

drivers/net/e1000e/param.c

···
 *******************************************************************************/
 
 #include <linux/netdevice.h>
+#include <linux/pci.h>
 
 #include "e1000.h"
 
···
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
-			ndev_info(adapter->netdev, "%s Enabled\n", opt->name);
+			e_info("%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
-			ndev_info(adapter->netdev, "%s Disabled\n", opt->name);
+			e_info("%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			ndev_info(adapter->netdev,
-					"%s set to %i\n", opt->name, *value);
+			e_info("%s set to %i\n", opt->name, *value);
 			return 0;
 		}
 		break;
···
 			ent = &opt->arg.l.p[i];
 			if (*value == ent->i) {
 				if (ent->str[0] != '\0')
-					ndev_info(adapter->netdev, "%s\n",
-						  ent->str);
+					e_info("%s\n", ent->str);
 				return 0;
 			}
 		}
···
 		BUG();
 	}
 
-	ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n",
-	       opt->name, *value, opt->err);
+	e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
+	       opt->err);
 	*value = opt->def;
 	return -1;
 }
···
 void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	struct net_device *netdev = adapter->netdev;
 	int bd = adapter->bd_number;
 
 	if (bd >= E1000_MAX_NIC) {
-		ndev_notice(netdev,
-		       "Warning: no configuration for board #%i\n", bd);
-		ndev_notice(netdev, "Using defaults for all values\n");
+		e_notice("Warning: no configuration for board #%i\n", bd);
+		e_notice("Using defaults for all values\n");
 	}
 
 	{ /* Transmit Interrupt Delay */
···
 			adapter->itr = InterruptThrottleRate[bd];
 			switch (adapter->itr) {
 			case 0:
-				ndev_info(netdev, "%s turned off\n",
-					opt.name);
+				e_info("%s turned off\n", opt.name);
 				break;
 			case 1:
-				ndev_info(netdev,
-					  "%s set to dynamic mode\n",
-					  opt.name);
+				e_info("%s set to dynamic mode\n", opt.name);
 				adapter->itr_setting = adapter->itr;
 				adapter->itr = 20000;
 				break;
 			case 3:
-				ndev_info(netdev,
-					"%s set to dynamic conservative mode\n",
+				e_info("%s set to dynamic conservative mode\n",
 					opt.name);
 				adapter->itr_setting = adapter->itr;
 				adapter->itr = 20000;

drivers/net/eepro.c

···
 
 	if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || dev->mc_count > 63)
 	{
-		/*
-		 *	We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. If it was a promisc request the
-		 *	flag is already set. If not we assert it.
-		 */
-		dev->flags|=IFF_PROMISC;
-
 		eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
 		mode = inb(ioaddr + REG2);
 		outb(mode | PRMSC_Mode, ioaddr + REG2);

drivers/net/eth16i.c

···
 
 	if(dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
 	{
-		dev->flags|=IFF_PROMISC;	/* Must do this */
 		outb(3, ioaddr + RECEIVE_MODE_REG);
 	} else {
 		outb(2, ioaddr + RECEIVE_MODE_REG);

drivers/net/forcedeth.c

···
  * Hardware access:
  */
 
-#define DEV_NEED_TIMERIRQ          0x00001  /* set the timer irq flag in the irq mask */
-#define DEV_NEED_LINKTIMER         0x00002  /* poll link settings. Relies on the timer irq */
-#define DEV_HAS_LARGEDESC          0x00004  /* device supports jumbo frames and needs packet format 2 */
-#define DEV_HAS_HIGH_DMA           0x00008  /* device supports 64bit dma */
-#define DEV_HAS_CHECKSUM           0x00010  /* device supports tx and rx checksum offloads */
-#define DEV_HAS_VLAN               0x00020  /* device supports vlan tagging and striping */
-#define DEV_HAS_MSI                0x00040  /* device supports MSI */
-#define DEV_HAS_MSI_X              0x00080  /* device supports MSI-X */
-#define DEV_HAS_POWER_CNTRL        0x00100  /* device supports power savings */
-#define DEV_HAS_STATISTICS_V1      0x00200  /* device supports hw statistics version 1 */
-#define DEV_HAS_STATISTICS_V2      0x00400  /* device supports hw statistics version 2 */
-#define DEV_HAS_TEST_EXTENDED      0x00800  /* device supports extended diagnostic test */
-#define DEV_HAS_MGMT_UNIT          0x01000  /* device supports management unit */
-#define DEV_HAS_CORRECT_MACADDR    0x02000  /* device supports correct mac address order */
-#define DEV_HAS_COLLISION_FIX      0x04000  /* device supports tx collision fix */
-#define DEV_HAS_PAUSEFRAME_TX_V1   0x08000  /* device supports tx pause frames version 1 */
-#define DEV_HAS_PAUSEFRAME_TX_V2   0x10000  /* device supports tx pause frames version 2 */
-#define DEV_HAS_PAUSEFRAME_TX_V3   0x20000  /* device supports tx pause frames version 3 */
-#define DEV_NEED_TX_LIMIT          0x40000  /* device needs to limit tx */
-#define DEV_HAS_GEAR_MODE          0x80000  /* device supports gear mode */
+#define DEV_NEED_TIMERIRQ          0x000001  /* set the timer irq flag in the irq mask */
+#define DEV_NEED_LINKTIMER         0x000002  /* poll link settings. Relies on the timer irq */
+#define DEV_HAS_LARGEDESC          0x000004  /* device supports jumbo frames and needs packet format 2 */
+#define DEV_HAS_HIGH_DMA           0x000008  /* device supports 64bit dma */
+#define DEV_HAS_CHECKSUM           0x000010  /* device supports tx and rx checksum offloads */
+#define DEV_HAS_VLAN               0x000020  /* device supports vlan tagging and striping */
+#define DEV_HAS_MSI                0x000040  /* device supports MSI */
+#define DEV_HAS_MSI_X              0x000080  /* device supports MSI-X */
+#define DEV_HAS_POWER_CNTRL        0x000100  /* device supports power savings */
+#define DEV_HAS_STATISTICS_V1      0x000200  /* device supports hw statistics version 1 */
+#define DEV_HAS_STATISTICS_V2      0x000400  /* device supports hw statistics version 2 */
+#define DEV_HAS_STATISTICS_V3      0x000800  /* device supports hw statistics version 3 */
+#define DEV_HAS_TEST_EXTENDED      0x001000  /* device supports extended diagnostic test */
+#define DEV_HAS_MGMT_UNIT          0x002000  /* device supports management unit */
+#define DEV_HAS_CORRECT_MACADDR    0x004000  /* device supports correct mac address order */
+#define DEV_HAS_COLLISION_FIX      0x008000  /* device supports tx collision fix */
+#define DEV_HAS_PAUSEFRAME_TX_V1   0x010000  /* device supports tx pause frames version 1 */
+#define DEV_HAS_PAUSEFRAME_TX_V2   0x020000  /* device supports tx pause frames version 2 */
+#define DEV_HAS_PAUSEFRAME_TX_V3   0x040000  /* device supports tx pause frames version 3 */
+#define DEV_NEED_TX_LIMIT          0x080000  /* device needs to limit tx */
+#define DEV_HAS_GEAR_MODE          0x100000  /* device supports gear mode */
 
 enum {
 	NvRegIrqStatus = 0x000,
···
 #define NVREG_TX_PAUSEFRAME_ENABLE_V1	0x01800010
 #define NVREG_TX_PAUSEFRAME_ENABLE_V2	0x056003f0
 #define NVREG_TX_PAUSEFRAME_ENABLE_V3	0x09f00880
+	NvRegTxPauseFrameLimit = 0x174,
+#define NVREG_TX_PAUSEFRAMELIMIT_ENABLE	0x00010000
 	NvRegMIIStatus = 0x180,
 #define NVREG_MIISTAT_ERROR		0x0001
 #define NVREG_MIISTAT_LINKCHANGE	0x0008
···
 #define NVREG_MIICTL_WRITE	0x00400
 #define NVREG_MIICTL_ADDRSHIFT	5
 	NvRegMIIData = 0x194,
+	NvRegTxUnicast = 0x1a0,
+	NvRegTxMulticast = 0x1a4,
+	NvRegTxBroadcast = 0x1a8,
 	NvRegWakeUpFlags = 0x200,
 #define NVREG_WAKEUPFLAGS_VAL		0x7770
 #define NVREG_WAKEUPFLAGS_BUSYSHIFT	24
···
 #define NV_RX_FRAMINGERR	(1<<29)
 #define NV_RX_ERROR		(1<<30)
 #define NV_RX_AVAIL		(1<<31)
+#define NV_RX_ERROR_MASK	(NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4|NV_RX_CRCERR|NV_RX_OVERFLOW|NV_RX_FRAMINGERR)
 
 #define NV_RX2_CHECKSUMMASK	(0x1C000000)
 #define NV_RX2_CHECKSUM_IP	(0x10000000)
···
 /* error and avail are the same for both */
 #define NV_RX2_ERROR		(1<<30)
 #define NV_RX2_AVAIL		(1<<31)
+#define NV_RX2_ERROR_MASK	(NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4|NV_RX2_CRCERR|NV_RX2_OVERFLOW|NV_RX2_FRAMINGERR)
 
 #define NV_RX3_VLAN_TAG_PRESENT (1<<16)
 #define NV_RX3_VLAN_TAG_MASK	(0x0000FFFF)
···
 	{ "rx_bytes" },
 	{ "tx_pause" },
 	{ "rx_pause" },
-	{ "rx_drop_frame" }
+	{ "rx_drop_frame" },
+
+	/* version 3 stats */
+	{ "tx_unicast" },
+	{ "tx_multicast" },
+	{ "tx_broadcast" }
 };
 
 struct nv_ethtool_stats {
···
 	u64 tx_pause;
 	u64 rx_pause;
 	u64 rx_drop_frame;
+
+	/* version 3 stats */
+	u64 tx_unicast;
+	u64 tx_multicast;
+	u64 tx_broadcast;
 };
 
-#define NV_DEV_STATISTICS_V2_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64))
+#define NV_DEV_STATISTICS_V3_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64))
+#define NV_DEV_STATISTICS_V2_COUNT (NV_DEV_STATISTICS_V3_COUNT - 3)
 #define NV_DEV_STATISTICS_V1_COUNT (NV_DEV_STATISTICS_V2_COUNT - 6)
 
 /* diagnostics */
···
 		np->estats.rx_pause += readl(base + NvRegRxPause);
 		np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame);
 	}
+
+	if (np->driver_data & DEV_HAS_STATISTICS_V3) {
+		np->estats.tx_unicast += readl(base + NvRegTxUnicast);
+		np->estats.tx_multicast += readl(base + NvRegTxMulticast);
+		np->estats.tx_broadcast += readl(base + NvRegTxBroadcast);
+	}
 }
 
 /*
···
 	struct fe_priv *np = netdev_priv(dev);
 
 	/* If the nic supports hw counters then retrieve latest values */
-	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2)) {
+	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) {
 		nv_get_hw_stats(dev);
 
 		/* copy to net_device stats */
···
 			if (likely(flags & NV_RX_DESCRIPTORVALID)) {
 				len = flags & LEN_MASK_V1;
 				if (unlikely(flags & NV_RX_ERROR)) {
-					if (flags & NV_RX_ERROR4) {
+					if ((flags & NV_RX_ERROR_MASK) == NV_RX_ERROR4) {
 						len = nv_getlen(dev, skb->data, len);
 						if (len < 0) {
 							dev->stats.rx_errors++;
···
 						}
 					}
 					/* framing errors are soft errors */
-					else if (flags & NV_RX_FRAMINGERR) {
+					else if ((flags & NV_RX_ERROR_MASK) == NV_RX_FRAMINGERR) {
 						if (flags & NV_RX_SUBSTRACT1) {
 							len--;
 						}
···
 			if (likely(flags & NV_RX2_DESCRIPTORVALID)) {
 				len = flags & LEN_MASK_V2;
 				if (unlikely(flags & NV_RX2_ERROR)) {
-					if (flags & NV_RX2_ERROR4) {
+					if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) {
 						len = nv_getlen(dev, skb->data, len);
 						if (len < 0) {
 							dev->stats.rx_errors++;
···
 						}
 					}
 					/* framing errors are soft errors */
-					else if (flags & NV_RX2_FRAMINGERR) {
+					else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) {
 						if (flags & NV_RX2_SUBSTRACT1) {
 							len--;
 						}
···
 		if (likely(flags & NV_RX2_DESCRIPTORVALID)) {
 			len = flags & LEN_MASK_V2;
 			if (unlikely(flags & NV_RX2_ERROR)) {
-				if (flags & NV_RX2_ERROR4) {
+				if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) {
 					len = nv_getlen(dev, skb->data, len);
 					if (len < 0) {
 						dev_kfree_skb(skb);
···
 					}
 				}
 				/* framing errors are soft errors */
-				else if (flags & NV_RX2_FRAMINGERR) {
+				else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) {
 					if (flags & NV_RX2_SUBSTRACT1) {
 						len--;
 					}
···
 			u32 pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V1;
 			if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V2)
 				pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V2;
-			if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3)
+			if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3) {
 				pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V3;
+				/* limit the number of tx pause frames to a default of 8 */
+				writel(readl(base + NvRegTxPauseFrameLimit)|NVREG_TX_PAUSEFRAMELIMIT_ENABLE, base + NvRegTxPauseFrameLimit);
+			}
 			writel(pause_enable,  base + NvRegTxPauseFrame);
 			writel(regmisc|NVREG_MISC1_PAUSE_TX, base + NvRegMisc1);
 			np->pause_flags |= NV_PAUSEFRAME_TX_ENABLE;
···
 			return NV_DEV_STATISTICS_V1_COUNT;
 		else if (np->driver_data & DEV_HAS_STATISTICS_V2)
 			return NV_DEV_STATISTICS_V2_COUNT;
+		else if (np->driver_data & DEV_HAS_STATISTICS_V3)
+			return NV_DEV_STATISTICS_V3_COUNT;
 		else
 			return 0;
 	default:
···
 		mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
 
 	/* start statistics timer */
-	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2))
+	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3))
 		mod_timer(&np->stats_poll,
 			round_jiffies(jiffies + STATS_INTERVAL));
 
···
 	if (err < 0)
 		goto out_disable;
 
-	if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2))
+	if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3))
 		np->register_size = NV_PCI_REGSZ_VER3;
 	else if (id->driver_data & DEV_HAS_STATISTICS_V1)
 		np->register_size = NV_PCI_REGSZ_VER2;
···
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{0,},
 };

drivers/net/fs_enet/mac-fcc.c

···
 #define FCC_NAPI_RX_EVENT_MSK	(FCC_ENET_RXF | FCC_ENET_RXB)
 #define FCC_RX_EVENT		(FCC_ENET_RXF)
 #define FCC_TX_EVENT		(FCC_ENET_TXB)
-#define FCC_ERR_EVENT_MSK	(FCC_ENET_TXE | FCC_ENET_BSY)
+#define FCC_ERR_EVENT_MSK	(FCC_ENET_TXE)
 
 static int setup_data(struct net_device *dev)
 {

drivers/net/gianfar.c

···
 		spin_unlock(&priv->rxlock);
 		spin_unlock_irqrestore(&priv->txlock, flags);
 
-#ifdef CONFIG_GFAR_NAPI
 		napi_disable(&priv->napi);
-#endif
 
 		if (magic_packet) {
 			/* Enable interrupt on Magic Packet */
···
 
 	netif_device_attach(dev);
 
-#ifdef CONFIG_GFAR_NAPI
 	napi_enable(&priv->napi);
-#endif
 
 	return 0;
 }

drivers/net/hamradio/mkiss.c

···
 		}
 
 		printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name,
-		       (ax->tty->ops->chars_in_buffer(ax->tty) || ax->xleft) ?
+		       (tty_chars_in_buffer(ax->tty) || ax->xleft) ?
 		       "bad line quality" : "driver error");
 
 		ax->xleft = 0;

drivers/net/igb/e1000_82575.c

···
 	for (; mc_addr_count > 0; mc_addr_count--) {
 		hash_value = igb_hash_mc_addr(hw, mc_addr_list);
 		hw_dbg("Hash value = 0x%03X\n", hash_value);
-		hw->mac.ops.mta_set(hw, hash_value);
+		igb_mta_set(hw, hash_value);
 		mc_addr_list += ETH_ALEN;
 	}
 }
···
 		       E1000_PCS_LCTL_FORCE_LINK;     /* Force Link */
 		hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
 	}
+
+	if (hw->mac.type == e1000_82576) {
+		reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+		igb_force_mac_fc(hw);
+	}
+
 	wr32(E1000_PCS_LCTL, reg);
 
 	return 0;
···
 
 out:
 	return ret_val;
-}
-
-/**
- *  igb_translate_register_82576 - Translate the proper register offset
- *  @reg: e1000 register to be read
- *
- *  Registers in 82576 are located in different offsets than other adapters
- *  even though they function in the same manner.  This function takes in
- *  the name of the register to read and returns the correct offset for
- *  82576 silicon.
- **/
-u32 igb_translate_register_82576(u32 reg)
-{
-	/*
-	 * Some of the Kawela registers are located at different
-	 * offsets than they are in older adapters.
-	 * Despite the difference in location, the registers
-	 * function in the same manner.
-	 */
-	switch (reg) {
-	case E1000_TDBAL(0):
-		reg = 0x0E000;
-		break;
-	case E1000_TDBAH(0):
-		reg = 0x0E004;
-		break;
-	case E1000_TDLEN(0):
-		reg = 0x0E008;
-		break;
-	case E1000_TDH(0):
-		reg = 0x0E010;
-		break;
-	case E1000_TDT(0):
-		reg = 0x0E018;
-		break;
-	case E1000_TXDCTL(0):
-		reg = 0x0E028;
-		break;
-	case E1000_RDBAL(0):
-		reg = 0x0C000;
-		break;
-	case E1000_RDBAH(0):
-		reg = 0x0C004;
-		break;
-	case E1000_RDLEN(0):
-		reg = 0x0C008;
-		break;
-	case E1000_RDH(0):
-		reg = 0x0C010;
-		break;
-	case E1000_RDT(0):
-		reg = 0x0C018;
-		break;
-	case E1000_RXDCTL(0):
-		reg = 0x0C028;
-		break;
-	case E1000_SRRCTL(0):
-		reg = 0x0C00C;
-		break;
-	default:
-		break;
-	}
-
-	return reg;
 }
 
 /**

drivers/net/igb/e1000_82575.h

···
 #ifndef _E1000_82575_H_
 #define _E1000_82575_H_
 
-u32 igb_translate_register_82576(u32 reg);
 void igb_update_mc_addr_list_82575(struct e1000_hw*, u8*, u32, u32, u32);
 extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw);
 extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);

drivers/net/igb/e1000_defines.h

···
 #define E1000_PCS_LCTL_FDV_FULL          8
 #define E1000_PCS_LCTL_FSD               0x10
 #define E1000_PCS_LCTL_FORCE_LINK        0x20
+#define E1000_PCS_LCTL_FORCE_FCTRL       0x80
 #define E1000_PCS_LCTL_AN_ENABLE         0x10000
 #define E1000_PCS_LCTL_AN_RESTART        0x20000
 #define E1000_PCS_LCTL_AN_TIMEOUT        0x40000

drivers/net/igb/e1000_hw.h

···
 	void (*rar_set)(struct e1000_hw *, u8 *, u32);
 	s32  (*read_mac_addr)(struct e1000_hw *);
 	s32  (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
-	void (*mta_set)(struct e1000_hw *, u32);
 };
 
 struct e1000_phy_operations {

drivers/net/igb/e1000_mac.c

···
 }
 
 /**
- *  igb_init_rx_addrs - Initialize receive address's
- *  @hw: pointer to the HW structure
- *  @rar_count: receive address registers
- *
- *  Setups the receive address registers by setting the base receive address
- *  register to the devices MAC address and clearing all the other receive
- *  address registers to 0.
- **/
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
-{
-	u32 i;
-
-	/* Setup the receive address */
-	hw_dbg("Programming MAC Address into RAR[0]\n");
-
-	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
-
-	/* Zero out the other (rar_entry_count - 1) receive addresses */
-	hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
-	for (i = 1; i < rar_count; i++) {
-		array_wr32(E1000_RA, (i << 1), 0);
-		wrfl();
-		array_wr32(E1000_RA, ((i << 1) + 1), 0);
-		wrfl();
-	}
-}
-
-/**
  *  igb_check_alt_mac_addr - Check for alternate MAC addr
  *  @hw: pointer to the HW structure
  *
···
  *  current value is read, the new bit is OR'd in and the new value is
  *  written back into the register.
  **/
-static void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
 {
 	u32 hash_bit, hash_reg, mta;
 
···
 
 	array_wr32(E1000_MTA, hash_reg, mta);
 	wrfl();
-}
-
-/**
- *  igb_update_mc_addr_list - Update Multicast addresses
- *  @hw: pointer to the HW structure
- *  @mc_addr_list: array of multicast addresses to program
- *  @mc_addr_count: number of multicast addresses to program
- *  @rar_used_count: the first RAR register free to program
- *  @rar_count: total number of supported Receive Address Registers
- *
- *  Updates the Receive Address Registers and Multicast Table Array.
- *  The caller must have a packed mc_addr_list of multicast addresses.
- *  The parameter rar_count will usually be hw->mac.rar_entry_count
- *  unless there are workarounds that change this.
- **/
-void igb_update_mc_addr_list(struct e1000_hw *hw,
-			       u8 *mc_addr_list, u32 mc_addr_count,
-			       u32 rar_used_count, u32 rar_count)
-{
-	u32 hash_value;
-	u32 i;
-
-	/*
-	 * Load the first set of multicast addresses into the exact
-	 * filters (RAR).  If there are not enough to fill the RAR
-	 * array, clear the filters.
-	 */
-	for (i = rar_used_count; i < rar_count; i++) {
-		if (mc_addr_count) {
-			hw->mac.ops.rar_set(hw, mc_addr_list, i);
-			mc_addr_count--;
-			mc_addr_list += ETH_ALEN;
-		} else {
-			array_wr32(E1000_RA, i << 1, 0);
-			wrfl();
-			array_wr32(E1000_RA, (i << 1) + 1, 0);
-			wrfl();
-		}
-	}
-
-	/* Clear the old settings from the MTA */
-	hw_dbg("Clearing MTA\n");
-	for (i = 0; i < hw->mac.mta_reg_count; i++) {
-		array_wr32(E1000_MTA, i, 0);
-		wrfl();
-	}
-
-	/* Load any remaining multicast addresses into the hash table. */
-	for (; mc_addr_count > 0; mc_addr_count--) {
-		hash_value = igb_hash_mc_addr(hw, mc_addr_list);
-		hw_dbg("Hash value = 0x%03X\n", hash_value);
-		igb_mta_set(hw, hash_value);
-		mc_addr_list += ETH_ALEN;
-	}
 }
 
 /**

drivers/net/igb/e1000_mac.h

···
 				       u16 *duplex);
 s32  igb_id_led_init(struct e1000_hw *hw);
 s32  igb_led_off(struct e1000_hw *hw);
-void igb_update_mc_addr_list(struct e1000_hw *hw,
-			       u8 *mc_addr_list, u32 mc_addr_count,
-			       u32 rar_used_count, u32 rar_count);
 s32  igb_setup_link(struct e1000_hw *hw);
 s32  igb_validate_mdi_setting(struct e1000_hw *hw);
 s32  igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
···
 void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
 void igb_clear_vfta(struct e1000_hw *hw);
 void igb_config_collision_dist(struct e1000_hw *hw);
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
 void igb_put_hw_semaphore(struct e1000_hw *hw);
 void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
 s32  igb_check_alt_mac_addr(struct e1000_hw *hw);

drivers/net/igb/e1000_regs.h

···
 #define E1000_RETA(_i)  (0x05C00 + ((_i) * 4))
 #define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
 
-#define E1000_REGISTER(a, reg) (((a)->mac.type < e1000_82576) \
-                               ? reg : e1000_translate_register_82576(reg))
-
 #define wr32(reg, value) (writel(value, hw->hw_addr + reg))
 #define rd32(reg) (readl(hw->hw_addr + reg))
 #define wrfl() ((void)rd32(E1000_STATUS))

drivers/net/igb/igb_main.c

···
 		array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
 		break;
 	case e1000_82576:
-		/* Kawela uses a table-based method for assigning vectors.
+		/* The 82576 uses a table-based method for assigning vectors.
 		   Each queue has a single entry in the table to which we write
 		   a vector number along with a "valid" bit.  Sadly, the layout
 		   of the table is somewhat counterintuitive. */
···
 			ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
 }
 
-static void igb_init_manageability(struct igb_adapter *adapter)
-{
-	struct e1000_hw *hw = &adapter->hw;
-
-	if (adapter->en_mng_pt) {
-		u32 manc2h = rd32(E1000_MANC2H);
-		u32 manc = rd32(E1000_MANC);
-
-		/* enable receiving management packets to the host */
-		/* this will probably generate destination unreachable messages
-		 * from the host OS, but the packets will be handled on SMBUS */
-		manc |= E1000_MANC_EN_MNG2HOST;
-#define E1000_MNG2HOST_PORT_623 (1 << 5)
-#define E1000_MNG2HOST_PORT_664 (1 << 6)
-		manc2h |= E1000_MNG2HOST_PORT_623;
-		manc2h |= E1000_MNG2HOST_PORT_664;
-		wr32(E1000_MANC2H, manc2h);
-
-		wr32(E1000_MANC, manc);
-	}
-}
-
 /**
  * igb_configure - configure the hardware for RX and TX
  * @adapter: private board structure
···
 	igb_set_multi(netdev);
 
 	igb_restore_vlan(adapter);
-	igb_init_manageability(adapter);
 
 	igb_configure_tx(adapter);
 	igb_setup_rctl(adapter);
···
 
 	unregister_netdev(netdev);
 
-	if (!igb_check_reset_block(&adapter->hw))
+	if (adapter->hw.phy.ops.reset_phy &&
+	    !igb_check_reset_block(&adapter->hw))
 		adapter->hw.phy.ops.reset_phy(&adapter->hw);
 
 	igb_remove_device(&adapter->hw);
···
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct igb_adapter *adapter = netdev_priv(netdev);
-
-	igb_init_manageability(adapter);
 
 	if (netif_running(netdev)) {
 		if (igb_up(adapter)) {

drivers/net/lp486e.c

···
 			return;
 		}
 		if (dev->mc_count == 0 && !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
-			if (dev->flags & IFF_ALLMULTI)
-				dev->flags |= IFF_PROMISC;
 			lp->i596_config[8] &= ~0x01;
 		} else {
 			lp->i596_config[8] |= 0x01;

drivers/net/meth.c

···
 	DPRINTK("Loading MAC Address: %s\n", print_mac(mac, dev->dev_addr));
 	macaddr = 0;
 	for (i = 0; i < 6; i++)
-		macaddr |= dev->dev_addr[i] << ((5 - i) * 8);
+		macaddr |= (u64)dev->dev_addr[i] << ((5 - i) * 8);
 
 	mace->eth.mac_addr = macaddr;
 }

drivers/net/myri10ge/myri10ge.c

···
 		dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
 		goto abort_with_netdev;
 	}
+	(void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 	mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
 				      &mgp->cmd_bus, GFP_KERNEL);
 	if (mgp->cmd == NULL)

drivers/net/myri10ge/myri10ge_mcp.h

···
 #define	MXGEFW_ETH_SEND_3	0x2c0000
 #define	MXGEFW_ETH_RECV_SMALL	0x300000
 #define	MXGEFW_ETH_RECV_BIG	0x340000
+#define	MXGEFW_ETH_SEND_GO	0x380000
+#define	MXGEFW_ETH_SEND_STOP	0x3C0000
 
 #define	MXGEFW_ETH_SEND(n)		(0x200000 + (((n) & 0x03) * 0x40000))
 #define	MXGEFW_ETH_SEND_OFFSET(n)	(MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)
···
 	 * MXGEFW_CMD_RESET is issued */
 
 	MXGEFW_CMD_SET_INTRQ_DMA,
+	/* data0 = LSW of the host address
+	 * data1 = MSW of the host address
+	 * data2 = slice number if multiple slices are used
+	 */
+
 	MXGEFW_CMD_SET_BIG_BUFFER_SIZE,	/* in bytes, power of 2 */
 	MXGEFW_CMD_SET_SMALL_BUFFER_SIZE,	/* in bytes */
 
···
 	MXGEFW_CMD_GET_SEND_OFFSET,
 	MXGEFW_CMD_GET_SMALL_RX_OFFSET,
 	MXGEFW_CMD_GET_BIG_RX_OFFSET,
+	/* data0 = slice number if multiple slices are used */
+
 	MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
 	MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
 
···
 	MXGEFW_CMD_SET_STATS_DMA_V2,
 	/* data0, data1 = bus addr,
 	 * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
-	 * adding new stuff to mcp_irq_data without changing the ABI */
+	 * adding new stuff to mcp_irq_data without changing the ABI
+	 *
+	 * If multiple slices are used, data2 contains both the size of the
+	 * structure (in the lower 16 bits) and the slice number
+	 * (in the upper 16 bits).
+	 */
 
 	MXGEFW_CMD_UNALIGNED_TEST,
 	/* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
···
 	MXGEFW_CMD_GET_MAX_RSS_QUEUES,
 	MXGEFW_CMD_ENABLE_RSS_QUEUES,
 	/* data0 = number of slices n (0, 1, ..., n-1) to enable
-	 * data1 = interrupt mode.
-	 * 0=share one INTx/MSI, 1=use one MSI-X per queue.
+	 * data1 = interrupt mode | use of multiple transmit queues.
+	 * 0=share one INTx/MSI.
+	 * 1=use one MSI-X per queue.
 	 * If all queues share one interrupt, the driver must have set
 	 * RSS_SHARED_INTERRUPT_DMA before enabling queues.
+	 * 2=enable both receive and send queues.
+	 * Without this bit set, only one send queue (slice 0's send queue)
+	 * is enabled.  The receive queues are always enabled.
 	 */
-#define MXGEFW_SLICE_INTR_MODE_SHARED 0
-#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1
+#define MXGEFW_SLICE_INTR_MODE_SHARED          0x0
+#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE   0x1
+#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2
 
 	MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET,
 	MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA,
···
 	 * 2: TCP_IPV4        (required by RSS)
 	 * 3: IPV4 | TCP_IPV4 (required by RSS)
 	 * 4: source port
+	 * 5: source port + destination port
 	 */
 #define MXGEFW_RSS_HASH_TYPE_IPV4      0x1
 #define MXGEFW_RSS_HASH_TYPE_TCP_IPV4  0x2
 #define MXGEFW_RSS_HASH_TYPE_SRC_PORT  0x4
+#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5
+#define MXGEFW_RSS_HASH_TYPE_MAX 0x5
 
 	MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
 	/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
···
 
 	MXGEFW_CMD_GET_DCA_OFFSET,
 	/* offset of dca control for WDMAs */
+
+	/* VMWare NetQueue commands */
+	MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE,
+	MXGEFW_CMD_NETQ_ADD_FILTER,
+	/* data0 = filter_id << 16 | queue << 8 | type */
+	/* data1 = MS4 of MAC Addr */
+	/* data2 = LS2_MAC << 16 | VLAN_tag */
+	MXGEFW_CMD_NETQ_DEL_FILTER,
+	/* data0 = filter_id */
+	MXGEFW_CMD_NETQ_QUERY1,
+	MXGEFW_CMD_NETQ_QUERY2,
+	MXGEFW_CMD_NETQ_QUERY3,
+	MXGEFW_CMD_NETQ_QUERY4,
+
 };
 
 enum myri10ge_mcp_cmd_status {
···
 	u8 stats_updated;
 	u8 valid;
 };
+
+/* definitions for NETQ filter type */
+#define MXGEFW_NETQ_FILTERTYPE_NONE 0
+#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1
+#define MXGEFW_NETQ_FILTERTYPE_VLAN 2
+#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3
 
 #endif				/* __MYRI10GE_MCP_H__ */

drivers/net/myri10ge/myri10ge_mcp_gen_header.h

···
 	unsigned char mcp_index;
 	unsigned char disable_rabbit;
 	unsigned char unaligned_tlp;
-	unsigned char pad1;
+	unsigned char pcie_link_algo;
 	unsigned counters_addr;
 	unsigned copy_block_info;	/* for small mcps loaded with "lload -d" */
 	unsigned short handoff_id_major;	/* must be equal */

drivers/net/netxen/netxen_nic.h

···
 	NETXEN_BRDTYPE_P3_10000_BASE_T = 0x0027,
 	NETXEN_BRDTYPE_P3_XG_LOM = 0x0028,
 	NETXEN_BRDTYPE_P3_4_GB_MM = 0x0029,
+	NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
+	NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
 	NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
 	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
 
···
 	nx_nic_intr_coalesce_data_t	irq;
 } nx_nic_intr_coalesce_t;
 
+#define NX_HOST_REQUEST		0x13
+#define NX_NIC_REQUEST		0x14
+
+#define NX_MAC_EVENT		0x1
+
+enum {
+	NX_NIC_H2C_OPCODE_START = 0,
+	NX_NIC_H2C_OPCODE_CONFIG_RSS,
+	NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL,
+	NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE,
+	NX_NIC_H2C_OPCODE_CONFIG_LED,
+	NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS,
+	NX_NIC_H2C_OPCODE_CONFIG_L2_MAC,
+	NX_NIC_H2C_OPCODE_LRO_REQUEST,
+	NX_NIC_H2C_OPCODE_GET_SNMP_STATS,
+	NX_NIC_H2C_OPCODE_PROXY_START_REQUEST,
+	NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST,
+	NX_NIC_H2C_OPCODE_PROXY_SET_MTU,
+	NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE,
+	NX_H2P_OPCODE_GET_FINGER_PRINT_REQUEST,
+	NX_H2P_OPCODE_INSTALL_LICENSE_REQUEST,
+	NX_H2P_OPCODE_GET_LICENSE_CAPABILITY_REQUEST,
+	NX_NIC_H2C_OPCODE_GET_NET_STATS,
+	NX_NIC_H2C_OPCODE_LAST
+};
+
+#define VPORT_MISS_MODE_DROP		0 /* drop all unmatched */
+#define VPORT_MISS_MODE_ACCEPT_ALL	1 /* accept all packets */
+#define VPORT_MISS_MODE_ACCEPT_MULTI	2 /* accept unmatched multicast */
+
 typedef struct {
 	u64 qhdr;
 	u64 req_hdr;
···
 	int (*disable_phy_interrupts) (struct netxen_adapter *);
 	int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t);
 	int (*set_mtu) (struct netxen_adapter *, int);
-	int (*set_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t);
+	int (*set_promisc) (struct netxen_adapter *, u32);
 	int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
 	int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
 	int (*init_port) (struct netxen_adapter *, int);
···
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
 void netxen_p2_nic_set_multi(struct net_device *netdev);
 void netxen_p3_nic_set_multi(struct net_device *netdev);
+int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
 
-u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu);
+int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
 int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
 
 int netxen_nic_set_mac(struct net_device *netdev, void *p);
···
 	{NETXEN_BRDTYPE_P3_10G_SFP_PLUS, 2, "Dual XGb SFP+ LP"},
 	{NETXEN_BRDTYPE_P3_10000_BASE_T, 1, "XGB 10G BaseT LP"},
 	{NETXEN_BRDTYPE_P3_XG_LOM,  2, "Dual XGb LOM"},
-	{NETXEN_BRDTYPE_P3_4_GB_MM, 4, "Quad GB - March Madness"},
+	{NETXEN_BRDTYPE_P3_4_GB_MM, 4, "NX3031 Gigabit Ethernet"},
+	{NETXEN_BRDTYPE_P3_10G_SFP_CT, 2, "NX3031 10 Gigabit Ethernet"},
+	{NETXEN_BRDTYPE_P3_10G_SFP_QT, 2, "Quanta Dual XGb SFP+"},
 	{NETXEN_BRDTYPE_P3_10G_CX4, 2, "Reference Dual CX4 Option"},
 	{NETXEN_BRDTYPE_P3_10G_XFP, 1, "Reference Single XFP Option"}
 };

drivers/net/netxen/netxen_nic_ctx.c

···
 	return rcode;
 }
 
-u32
-nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu)
+int
+nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu)
 {
 	u32 rcode = NX_RCODE_SUCCESS;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx[0];
···
 				0,
 				NX_CDRP_CMD_SET_MTU);
 
-	return rcode;
+	if (rcode != NX_RCODE_SUCCESS)
+		return -EIO;
+
+	return 0;
 }
 
 static int

drivers/net/netxen/netxen_nic_ethtool.c

···
 		if (netif_running(dev)) {
 			ecmd->speed = adapter->link_speed;
 			ecmd->duplex = adapter->link_duplex;
-		} else
-			return -EIO;	/* link absent */
+			ecmd->autoneg = adapter->link_autoneg;
+		}
+
 	} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
-		ecmd->supported = (SUPPORTED_TP |
-				   SUPPORTED_1000baseT_Full |
-				   SUPPORTED_10000baseT_Full);
-		ecmd->advertising = (ADVERTISED_TP |
-				     ADVERTISED_1000baseT_Full |
-				     ADVERTISED_10000baseT_Full);
+		u32 val;
+
+		adapter->hw_read_wx(adapter, NETXEN_PORT_MODE_ADDR, &val, 4);
+		if (val == NETXEN_PORT_MODE_802_3_AP) {
+			ecmd->supported = SUPPORTED_1000baseT_Full;
+			ecmd->advertising = ADVERTISED_1000baseT_Full;
+		} else {
+			ecmd->supported = SUPPORTED_10000baseT_Full;
+			ecmd->advertising = ADVERTISED_10000baseT_Full;
+		}
+
 		ecmd->port = PORT_TP;
 
-		ecmd->speed = SPEED_10000;
+		if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+			u16 pcifn = adapter->ahw.pci_func;
+
+			adapter->hw_read_wx(adapter,
+				P3_LINK_SPEED_REG(pcifn), &val, 4);
+			ecmd->speed = P3_LINK_SPEED_MHZ *
+					P3_LINK_SPEED_VAL(pcifn, val);
+		} else
+			ecmd->speed = SPEED_10000;
+
 		ecmd->duplex = DUPLEX_FULL;
 		ecmd->autoneg = AUTONEG_DISABLE;
 	} else
···
 		break;
 	case NETXEN_BRDTYPE_P2_SB31_10G:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
+	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 		ecmd->supported |= SUPPORTED_FIBRE;
 		ecmd->advertising |= ADVERTISED_FIBRE;

drivers/net/netxen/netxen_nic_hdr.h

···
 #define XG_LINK_STATE_P3(pcifn,val) \
 	(((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK)
 
+#define P3_LINK_SPEED_MHZ	100
+#define P3_LINK_SPEED_MASK	0xff
+#define P3_LINK_SPEED_REG(pcifn)	\
+	(CRB_PF_LINK_SPEED_1 + (((pcifn) / 4) * 4))
+#define P3_LINK_SPEED_VAL(pcifn, reg)	\
+	(((reg) >> (8 * ((pcifn) & 0x3))) & P3_LINK_SPEED_MASK)
+
 #define NETXEN_CAM_RAM_BASE	(NETXEN_CRB_CAM + 0x02000)
 #define NETXEN_CAM_RAM(reg)	(NETXEN_CAM_RAM_BASE + (reg))
 #define NETXEN_FW_VERSION_MAJOR (NETXEN_CAM_RAM(0x150))
···
 
 #define PCIE_SETUP_FUNCTION	(0x12040)
 #define PCIE_SETUP_FUNCTION2	(0x12048)
+#define PCIE_MISCCFG_RC         (0x1206c)
 #define PCIE_TGT_SPLIT_CHICKEN	(0x12080)
 #define PCIE_CHICKEN3		(0x120c8)
 
+#define ISR_INT_STATE_REG       (NETXEN_PCIX_PS_REG(PCIE_MISCCFG_RC))
 #define PCIE_MAX_MASTER_SPLIT	(0x14048)
 
 #define NETXEN_PORT_MODE_NONE		0
···
 #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL		(0x14)
 
 #define	ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
+#define ISR_LEGACY_INT_TRIGGERED(VAL)	(((VAL) & 0x300) == 0x200)
 
 /*
  * PCI Interrupt Vector Values.

drivers/net/netxen/netxen_nic_hw.c

···
 #define ADDR_IN_RANGE(addr, low, high)	\
 	(((addr) <= (high)) && ((addr) >= (low)))
 
-#define NETXEN_MAX_MTU		8000 + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE
-#define NETXEN_MIN_MTU		64
-#define NETXEN_ETH_FCS_SIZE     4
-#define NETXEN_ENET_HEADER_SIZE 14
 #define NETXEN_WINDOW_ONE 	0x2000000 /*CRB Window: bit 25 of CRB address */
-#define NETXEN_FIRMWARE_LEN 	((16 * 1024) / 4)
-#define NETXEN_NIU_HDRSIZE	(0x1 << 6)
-#define NETXEN_NIU_TLRSIZE	(0x1 << 5)
 
 #define NETXEN_NIC_ZERO_PAUSE_ADDR     0ULL
 #define NETXEN_NIC_UNIT_PAUSE_ADDR     0x200ULL
···
 	return 0;
 }
 
-#define NIC_REQUEST		0x14
-#define NETXEN_MAC_EVENT	0x1
-
 static int nx_p3_sre_macaddr_change(struct net_device *dev,
 		u8 *addr, unsigned op)
 {
···
 	int rv;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
-	req.qhdr |= (NIC_REQUEST << 23);
-	req.req_hdr |= NETXEN_MAC_EVENT;
+	req.qhdr |= (NX_NIC_REQUEST << 23);
+	req.req_hdr |= NX_MAC_EVENT;
 	req.req_hdr |= ((u64)adapter->portnum << 16);
 	mac_req.op = op;
 	memcpy(&mac_req.mac_addr, addr, 6);
···
 	nx_mac_list_t *cur, *next, *del_list, *add_list = NULL;
 	struct dev_mc_list *mc_ptr;
 	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
-	adapter->set_promisc(adapter, NETXEN_NIU_PROMISC_MODE);
-
-	/*
-	 * Programming mac addresses will automaticly enabling L2 filtering.
-	 * HW will replace timestamp with L2 conid when L2 filtering is
-	 * enabled. This causes problem for LSA. Do not enabling L2 filtering
-	 * until that problem is fixed.
-	 */
-	if ((netdev->flags & IFF_PROMISC) ||
-			(netdev->mc_count > adapter->max_mc_count))
-		return;
+	u32 mode = VPORT_MISS_MODE_DROP;
 
 	del_list = adapter->mac_list;
 	adapter->mac_list = NULL;
 
 	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list);
+	nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
+
+	if (netdev->flags & IFF_PROMISC) {
+		mode = VPORT_MISS_MODE_ACCEPT_ALL;
+		goto send_fw_cmd;
+	}
+
+	if ((netdev->flags & IFF_ALLMULTI) ||
+			(netdev->mc_count > adapter->max_mc_count)) {
+		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
+		goto send_fw_cmd;
+	}
+
 	if (netdev->mc_count > 0) {
-		nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
 		for (mc_ptr = netdev->mc_list; mc_ptr;
 		     mc_ptr = mc_ptr->next) {
 			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr,
 					  &add_list, &del_list);
 		}
 	}
+
+send_fw_cmd:
+	adapter->set_promisc(adapter, mode);
 	for (cur = del_list; cur;) {
 		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL);
 		next = cur->next;
···
 	}
 }
 
+int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
+{
+	nx_nic_req_t req;
+
+	memset(&req, 0, sizeof(nx_nic_req_t));
+
+	req.qhdr |= (NX_HOST_REQUEST << 23);
+	req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE;
+	req.req_hdr |= ((u64)adapter->portnum << 16);
+	req.words[0] = cpu_to_le64(mode);
+
+	return netxen_send_cmd_descs(adapter,
+				(struct cmd_desc_type0 *)&req, 1);
+}
+
 #define	NETXEN_CONFIG_INTR_COALESCE	3
 
 /*
···
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
 
-	req.qhdr |= (NIC_REQUEST << 23);
+	req.qhdr |= (NX_NIC_REQUEST << 23);
 	req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
 	req.req_hdr |= ((u64)adapter->portnum << 16);
 
···
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	int max_mtu;
+	int rc = 0;
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		max_mtu = P3_MAX_MTU;
···
 	}
 
 	if (adapter->set_mtu)
-		adapter->set_mtu(adapter, mtu);
-	netdev->mtu = mtu;
+		rc = adapter->set_mtu(adapter, mtu);
 
-	mtu += MTU_FUDGE_FACTOR;
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		nx_fw_cmd_set_mtu(adapter, mtu);
-	else if (adapter->set_mtu)
-		adapter->set_mtu(adapter, mtu);
+	if (!rc)
+		netdev->mtu = mtu;
 
-	return 0;
+	return rc;
 }
 
 int netxen_is_flash_supported(struct netxen_adapter *adapter)
···
 		(netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 		printk(KERN_ERR "%s out of bound pci memory access. "
-			"offset is 0x%llx\n", netxen_nic_driver_name, off);
+			"offset is 0x%llx\n", netxen_nic_driver_name,
+			(unsigned long long)off);
 		return -1;
 	}
 
···
 		(netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 		printk(KERN_ERR "%s out of bound pci memory access. "
-			"offset is 0x%llx\n", netxen_nic_driver_name, off);
+			"offset is 0x%llx\n", netxen_nic_driver_name,
+			(unsigned long long)off);
 		return -1;
 	}
 
···
 	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
 	case NETXEN_BRDTYPE_P3_IMEZ:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
+	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 
···
 	default:
 		printk("%s: Unknown(%x)\n", netxen_nic_driver_name,
 		       boardinfo->board_type);
+		rv = -ENODEV;
 		break;
 	}
 
···
 
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
 {
+	new_mtu += MTU_FUDGE_FACTOR;
 	netxen_nic_write_w0(adapter,
 		NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
 		new_mtu);
···
 
 int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
 {
-	new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE;
+	new_mtu += MTU_FUDGE_FACTOR;
 	if (adapter->physical_port == 0)
 		netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
 				new_mtu);
···
 	__u32 status;
 	__u32 autoneg;
 	__u32 mode;
+	__u32 port_mode;
 
 	netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode);
 	if (netxen_get_niu_enable_ge(mode)) {	/* Gb 10/100/1000 Mbps mode */
+
+		adapter->hw_read_wx(adapter,
+				NETXEN_PORT_MODE_ADDR, &port_mode, 4);
+		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
+			adapter->link_speed   = SPEED_1000;
+			adapter->link_duplex  = DUPLEX_FULL;
+			adapter->link_autoneg = AUTONEG_DISABLE;
+			return;
+		}
+
 		if (adapter->phy_read
-		    && adapter->
-		    phy_read(adapter,
+		    && adapter->phy_read(adapter,
 			     NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
 			     &status) == 0) {
 			if (netxen_get_phy_link(status)) {
···
 					break;
 				}
 				if (adapter->phy_read
-				    && adapter->
-				    phy_read(adapter,
+				    && adapter->phy_read(adapter,
 					     NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
 					     &autoneg) != 0)
 					adapter->link_autoneg = autoneg;

drivers/net/netxen/netxen_nic_hw.h

···
 #define netxen_get_niu_enable_ge(config_word)	\
 		_netxen_crb_get_bit(config_word, 1)
 
-/* Promiscous mode options (GbE mode only) */
-typedef enum {
-	NETXEN_NIU_PROMISC_MODE = 0,
-	NETXEN_NIU_NON_PROMISC_MODE,
-	NETXEN_NIU_ALLMULTI_MODE
-} netxen_niu_prom_mode_t;
+#define NETXEN_NIU_NON_PROMISC_MODE	0
+#define NETXEN_NIU_PROMISC_MODE		1
+#define NETXEN_NIU_ALLMULTI_MODE	2
 
 /*
  * NIU GB Drop CRC Register
···
 
 /* Set promiscuous mode for a GbE interface */
 int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
-				    netxen_niu_prom_mode_t mode);
+				    u32 mode);
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
-				       netxen_niu_prom_mode_t mode);
+				       u32 mode);
 
 /* set the MAC address for a given MAC */
 int netxen_niu_macaddr_set(struct netxen_adapter *adapter,

drivers/net/netxen/netxen_nic_init.c

···
 	default:
 		break;
 	}
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		adapter->set_mtu = nx_fw_cmd_set_mtu;
+		adapter->set_promisc = netxen_p3_nic_set_promisc;
+	}
 }
 
 /*

drivers/net/netxen/netxen_nic_main.c

···
 	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
 		do {
 			adapter->pci_write_immediate(adapter,
-					ISR_INT_TARGET_STATUS, 0xffffffff);
+					adapter->legacy_intr.tgt_status_reg,
+					0xffffffff);
 			mask = adapter->pci_read_immediate(adapter,
 					ISR_INT_VECTOR);
 			if (!(mask & 0x80))
···
 		} while (--retries);
 
 		if (!retries) {
-			printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
+			printk(KERN_NOTICE "%s: Failed to disable interrupt\n",
 					netxen_nic_driver_name);
 		}
 	} else {
···
 static void netxen_nic_enable_int(struct netxen_adapter *adapter)
 {
 	u32 mask;
-
-	DPRINTK(1, INFO, "Entered ISR Enable \n");
 
 	if (adapter->intr_scheme != -1 &&
 		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
···
 
 	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
 		mask = 0xbff;
-		if (adapter->intr_scheme != -1 &&
-			adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+		if (adapter->intr_scheme == INTR_SCHEME_PERPORT)
+			adapter->pci_write_immediate(adapter,
+				adapter->legacy_intr.tgt_mask_reg, mask);
+		else
 			adapter->pci_write_normalize(adapter,
 					CRB_INT_VECTOR, 0);
-		}
-		adapter->pci_write_immediate(adapter,
-				ISR_INT_TARGET_MASK, mask);
 	}
-
-	DPRINTK(1, INFO, "Done with enable Int\n");
 }
 
 static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
···
 	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
 	case NETXEN_BRDTYPE_P3_IMEZ:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
+	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 		adapter->msix_supported = !!use_msi_x;
···
 	case NETXEN_BRDTYPE_P3_REF_QG:
 	case NETXEN_BRDTYPE_P3_4_GB:
 	case NETXEN_BRDTYPE_P3_4_GB_MM:
+		adapter->msix_supported = 0;
+		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+		break;
+
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 	case NETXEN_BRDTYPE_P2_SB31_2G:
 		adapter->msix_supported = 0;
···
 	adapter->status   &= ~NETXEN_NETDEV_STATUS;
 	adapter->rx_csum = 1;
 	adapter->mc_enabled = 0;
-	if (NX_IS_REVISION_P3(revision_id)) {
+	if (NX_IS_REVISION_P3(revision_id))
 		adapter->max_mc_count = 38;
-		adapter->max_rds_rings = 2;
-	} else {
+	else
 		adapter->max_mc_count = 16;
-		adapter->max_rds_rings = 3;
-	}
 
 	netdev->open		   = netxen_nic_open;
 	netdev->stop		   = netxen_nic_close;
···
 		if (adapter->portnum == 0)
 			first_driver = 1;
 	}
-	adapter->crb_addr_cmd_producer = crb_cmd_producer[adapter->portnum];
-	adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum];
-	netxen_nic_update_cmd_producer(adapter, 0);
-	netxen_nic_update_cmd_consumer(adapter, 0);
 
 	if (first_driver) {
 		first_boot = adapter->pci_read_normalize(adapter,
···
 			return -EIO;
 		}
 
+		if (adapter->fw_major < 4)
+			adapter->max_rds_rings = 3;
+		else
+			adapter->max_rds_rings = 2;
+
 		err = netxen_alloc_sw_resources(adapter);
 		if (err) {
 			printk(KERN_ERR "%s: Error in setting sw resources\n",
···
 				crb_cmd_producer[adapter->portnum];
 			adapter->crb_addr_cmd_consumer =
 				crb_cmd_consumer[adapter->portnum];
-		}
 
-		netxen_nic_update_cmd_producer(adapter, 0);
-		netxen_nic_update_cmd_consumer(adapter, 0);
+			netxen_nic_update_cmd_producer(adapter, 0);
+			netxen_nic_update_cmd_consumer(adapter, 0);
+		}
 
 		for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
 			for (ring = 0; ring < adapter->max_rds_rings; ring++)
···
 	netxen_nic_set_link_parameters(adapter);
 
 	netdev->set_multicast_list(netdev);
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		nx_fw_cmd_set_mtu(adapter, netdev->mtu);
-	else
+	if (adapter->set_mtu)
 		adapter->set_mtu(adapter, netdev->mtu);
 
 	mod_timer(&adapter->watchdog_timer, jiffies);
···
 
 	port = adapter->physical_port;
 
-	if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
-		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
-		linkup = (val >> port) & 1;
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE_P3);
+		val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
+		linkup = (val == XG_LINK_UP_P3);
 	} else {
-		if (adapter->fw_major < 4) {
-			val = adapter->pci_read_normalize(adapter,
-					CRB_XG_STATE);
+		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
+		if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+			linkup = (val >> port) & 1;
+		else {
 			val = (val >> port*8) & 0xff;
 			linkup = (val == XG_LINK_UP);
-		} else {
-			val = adapter->pci_read_normalize(adapter,
-				CRB_XG_STATE_P3);
-			val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
-			linkup = (val == XG_LINK_UP_P3);
 		}
 	}
 
···
 	struct netxen_adapter *adapter = data;
 	u32 our_int = 0;
 
-	our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
-	/* not our interrupt */
-	if ((our_int & (0x80 << adapter->portnum)) == 0)
+	u32 status = 0;
+
+	status = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+
+	if (!(status & adapter->legacy_intr.int_vec_bit))
 		return IRQ_NONE;
 
-	if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
-		/* claim interrupt */
-		adapter->pci_write_normalize(adapter, CRB_INT_VECTOR,
+	if (adapter->ahw.revision_id >= NX_P3_B1) {
+		/* check interrupt state machine, to be sure */
+		status = adapter->pci_read_immediate(adapter,
+				ISR_INT_STATE_REG);
+		if (!ISR_LEGACY_INT_TRIGGERED(status))
+			return IRQ_NONE;
+
+	} else if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+
+		our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
+		/* not our interrupt */
+		if ((our_int & (0x80 << adapter->portnum)) == 0)
+			return IRQ_NONE;
+
+		if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
+			/* claim interrupt */
+			adapter->pci_write_normalize(adapter,
+				CRB_INT_VECTOR,
 				our_int & ~((u32)(0x80 << adapter->portnum)));
+		}
 	}
 
 	netxen_handle_int(adapter);

drivers/net/netxen/netxen_nic_niu.c

···
 	int i;
 	DECLARE_MAC_BUF(mac);
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	for (i = 0; i < 10; i++) {
 		temp[0] = temp[1] = 0;
 		memcpy(temp + 2, addr, 2);
···
 	__u32 mac_cfg0;
 	u32 port = adapter->physical_port;
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	if (port > NETXEN_NIU_MAX_GBE_PORTS)
 		return -EINVAL;
 	mac_cfg0 = 0;
···
 	__u32 mac_cfg;
 	u32 port = adapter->physical_port;
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
 
···
 
 /* Set promiscuous mode for a GbE interface */
 int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
-				    netxen_niu_prom_mode_t mode)
+		u32 mode)
 {
 	__u32 reg;
 	u32 port = adapter->physical_port;
···
 	int phy = adapter->physical_port;
 	u8 temp[4];
 	u32 val;
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
 
 	if ((phy < 0) || (phy > NETXEN_NIU_MAX_XG_PORTS))
 		return -EIO;
···
 #endif  /*  0  */
 
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
-				       netxen_niu_prom_mode_t mode)
+		u32 mode)
 {
 	__u32 reg;
 	u32 port = adapter->physical_port;

drivers/net/netxen/netxen_nic_phan_reg.h

···
 #define CRB_HOST_STS_PROD           NETXEN_NIC_REG(0xdc)
 #define CRB_HOST_STS_CONS           NETXEN_NIC_REG(0xe0)
 #define CRB_PEG_CMD_PROD            NETXEN_NIC_REG(0xe4)
-#define CRB_PEG_CMD_CONS            NETXEN_NIC_REG(0xe8)
-#define CRB_HOST_BUFFER_PROD        NETXEN_NIC_REG(0xec)
+#define CRB_PF_LINK_SPEED_1         NETXEN_NIC_REG(0xe8)
+#define CRB_PF_LINK_SPEED_2         NETXEN_NIC_REG(0xec)
 #define CRB_HOST_BUFFER_CONS        NETXEN_NIC_REG(0xf0)
 #define CRB_JUMBO_BUFFER_PROD       NETXEN_NIC_REG(0xf4)
 #define CRB_JUMBO_BUFFER_CONS       NETXEN_NIC_REG(0xf8)

drivers/net/ni5010.c

···
 	PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name));
 
 	if (dev->flags&IFF_PROMISC || dev->flags&IFF_ALLMULTI || dev->mc_list) {
-		dev->flags |= IFF_PROMISC;
 		outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */
 		PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name));
 	} else {

drivers/net/ni52.c

···
 		if (num_addrs > len) {
 			printk(KERN_ERR "%s: switching to promisc. mode\n",
 				dev->name);
-			dev->flags |= IFF_PROMISC;
+			writeb(0x01, &cfg_cmd->promisc);
 		}
 	}
 	if (dev->flags & IFF_PROMISC)

drivers/net/qla3xxx.c

···
 
 #define DRV_NAME  	"qla3xxx"
 #define DRV_STRING 	"QLogic ISP3XXX Network Driver"
-#define DRV_VERSION	"v2.03.00-k4"
+#define DRV_VERSION	"v2.03.00-k5"
 #define PFX		DRV_NAME " "
 
 static const char ql3xxx_driver_name[] = DRV_NAME;
···
 	case ISP_CONTROL_FN0_NET:
 		qdev->mac_index = 0;
 		qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
-		qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
-		qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
 		qdev->mb_bit_mask = FN0_MA_BITS_MASK;
 		qdev->PHYAddr = PORT0_PHY_ADDRESS;
 		if (port_status & PORT_STATUS_SM0)
···
 	case ISP_CONTROL_FN1_NET:
 		qdev->mac_index = 1;
 		qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
-		qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
-		qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
 		qdev->mb_bit_mask = FN1_MA_BITS_MASK;
 		qdev->PHYAddr = PORT1_PHY_ADDRESS;
 		if (port_status & PORT_STATUS_SM1)
···
 {
 	struct ql3_adapter *qdev = netdev_priv(ndev);
 	return (ql_adapter_up(qdev));
-}
-
-static void ql3xxx_set_multicast_list(struct net_device *ndev)
-{
-	/*
-	 * We are manually parsing the list in the net_device structure.
-	 */
-	return;
 }
 
 static int ql3xxx_set_mac_address(struct net_device *ndev, void *p)
···
 	ndev->open = ql3xxx_open;
 	ndev->hard_start_xmit = ql3xxx_send;
 	ndev->stop = ql3xxx_close;
-	ndev->set_multicast_list = ql3xxx_set_multicast_list;
+	/* ndev->set_multicast_list
+	 * This device is one side of a two-function adapter
+	 * (NIC and iSCSI).  Promiscuous mode setting/clearing is
+	 * not allowed from the NIC side.
+	 */
 	SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops);
 	ndev->set_mac_address = ql3xxx_set_mac_address;
 	ndev->tx_timeout = ql3xxx_tx_timeout;
···
 	memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
 
 	ndev->tx_queue_len = NUM_REQ_Q_ENTRIES;
-
-	/* Turn off support for multicasting */
-	ndev->flags &= ~IFF_MULTICAST;
 
 	/* Record PCI bus information. */
 	ql_get_board_info(qdev);

drivers/net/qla3xxx.h

···
 
 #define OPCODE_OB_MAC_IOCB_FN0          0x01
 #define OPCODE_OB_MAC_IOCB_FN2          0x21
-#define OPCODE_OB_TCP_IOCB_FN0          0x03
-#define OPCODE_OB_TCP_IOCB_FN2          0x23
-#define OPCODE_UPDATE_NCB_IOCB_FN0      0x00
-#define OPCODE_UPDATE_NCB_IOCB_FN2      0x20
 
-#define OPCODE_UPDATE_NCB_IOCB      0xF0
 #define OPCODE_IB_MAC_IOCB          0xF9
 #define OPCODE_IB_3032_MAC_IOCB     0x09
 #define OPCODE_IB_IP_IOCB           0xFA
 #define OPCODE_IB_3032_IP_IOCB      0x0A
-#define OPCODE_IB_TCP_IOCB          0xFB
-#define OPCODE_DUMP_PROTO_IOCB      0xFE
-#define OPCODE_BUFFER_ALERT_IOCB    0xFB
 
 #define OPCODE_FUNC_ID_MASK                 0x30
 #define OUTBOUND_MAC_IOCB                   0x01	/* plus function bits */
-#define OUTBOUND_TCP_IOCB                   0x03	/* plus function bits */
-#define UPDATE_NCB_IOCB                     0x00	/* plus function bits */
 
 #define FN0_MA_BITS_MASK    0x00
 #define FN1_MA_BITS_MASK    0x80
···
 	__le32 reserved2;
 };
 
-struct ob_tcp_iocb_req {
-	u8 opcode;
-
-	u8 flags0;
-#define OB_TCP_IOCB_REQ_P       0x80
-#define OB_TCP_IOCB_REQ_CI      0x20
-#define OB_TCP_IOCB_REQ_H       0x10
-#define OB_TCP_IOCB_REQ_LN      0x08
-#define OB_TCP_IOCB_REQ_K       0x04
-#define OB_TCP_IOCB_REQ_D       0x02
-#define OB_TCP_IOCB_REQ_I       0x01
-
-	u8 flags1;
-#define OB_TCP_IOCB_REQ_OSM     0x40
-#define OB_TCP_IOCB_REQ_URG     0x20
-#define OB_TCP_IOCB_REQ_ACK     0x10
-#define OB_TCP_IOCB_REQ_PSH     0x08
-#define OB_TCP_IOCB_REQ_RST     0x04
-#define OB_TCP_IOCB_REQ_SYN     0x02
-#define OB_TCP_IOCB_REQ_FIN     0x01
-
-	u8 options_len;
-#define OB_TCP_IOCB_REQ_OMASK   0xF0
-#define OB_TCP_IOCB_REQ_SHIFT   4
-
-	__le32 transaction_id;
-	__le32 data_len;
-	__le32 hncb_ptr_low;
-	__le32 hncb_ptr_high;
-	__le32 buf_addr0_low;
-	__le32 buf_addr0_high;
-	__le32 buf_0_len;
-	__le32 buf_addr1_low;
-	__le32 buf_addr1_high;
-	__le32 buf_1_len;
-	__le32 buf_addr2_low;
-	__le32 buf_addr2_high;
-	__le32 buf_2_len;
-	__le32 time_stamp;
-	__le32 reserved1;
-};
-
-struct ob_tcp_iocb_rsp {
-	u8 opcode;
-
-	u8 flags0;
-#define OB_TCP_IOCB_RSP_C       0x20
-#define OB_TCP_IOCB_RSP_H       0x10
-#define OB_TCP_IOCB_RSP_LN      0x08
-#define OB_TCP_IOCB_RSP_K       0x04
-#define OB_TCP_IOCB_RSP_D       0x02
-#define OB_TCP_IOCB_RSP_I       0x01
-
-	u8 flags1;
-#define OB_TCP_IOCB_RSP_E       0x10
-#define OB_TCP_IOCB_RSP_W       0x08
-#define OB_TCP_IOCB_RSP_P       0x04
-#define OB_TCP_IOCB_RSP_T       0x02
-#define OB_TCP_IOCB_RSP_F       0x01
-
-	u8 state;
-#define OB_TCP_IOCB_RSP_SMASK   0xF0
-#define OB_TCP_IOCB_RSP_SHIFT   4
-
-	__le32 transaction_id;
-	__le32 local_ncb_ptr;
-	__le32 reserved0;
-};
-
 struct ib_ip_iocb_rsp {
 	u8 opcode;
 #define IB_IP_IOCB_RSP_3032_V   0x80
···
 #define IB_IP_IOCB_RSP_3032_IPE		0x20
 	__le16 reserved;
 #define IB_IP_IOCB_RSP_R        0x01
-	__le32 ial_low;
-	__le32 ial_high;
-};
-
-struct ib_tcp_iocb_rsp {
-	u8 opcode;
-	u8 flags;
-#define IB_TCP_IOCB_RSP_P       0x80
-#define IB_TCP_IOCB_RSP_T       0x40
-#define IB_TCP_IOCB_RSP_D       0x20
-#define IB_TCP_IOCB_RSP_N       0x10
-#define IB_TCP_IOCB_RSP_IP      0x03
-#define IB_TCP_FLAG_MASK        0xf0
-#define IB_TCP_FLAG_IOCB_SYN    0x00
-
-#define TCP_IB_RSP_FLAGS(x) (x->flags & ~IB_TCP_FLAG_MASK)
-
-	__le16 length;
-	__le32 hncb_ref_num;
 	__le32 ial_low;
 	__le32 ial_high;
 };
···
 	u32 small_buf_release_cnt;
 	u32 small_buf_total_size;
 
-	/* ISR related, saves status for DPC. */
-	u32 control_status;
-
 	struct eeprom_data nvram_data;
-	struct timer_list ioctl_timer;
 	u32 port_link_state;
-	u32 last_rsp_offset;
 
 	/* 4022 specific */
 	u32 mac_index;		/* Driver's MAC number can be 0 or 1 for first and second networking functions respectively */
 	u32 PHYAddr;		/* Address of PHY 0x1e00 Port 0 and 0x1f00 Port 1 */
 	u32 mac_ob_opcode;	/* Opcode to use on mac transmission */
-	u32 tcp_ob_opcode;	/* Opcode to use on tcp transmission */
-	u32 update_ob_opcode;	/* Opcode to use for updating NCB */
 	u32 mb_bit_mask;	/* MA Bits mask to use on transmission */
 	u32 numPorts;
 	struct workqueue_struct *workqueue;

drivers/net/sh_eth.c

···
 
 #include "sh_eth.h"
 
+/* CPU <-> EDMAC endian convert */
+static inline __u32 cpu_to_edmac(struct sh_eth_private *mdp, u32 x)
+{
+	switch (mdp->edmac_endian) {
+	case EDMAC_LITTLE_ENDIAN:
+		return cpu_to_le32(x);
+	case EDMAC_BIG_ENDIAN:
+		return cpu_to_be32(x);
+	}
+	return x;
+}
+
+static inline __u32 edmac_to_cpu(struct sh_eth_private *mdp, u32 x)
+{
+	switch (mdp->edmac_endian) {
+	case EDMAC_LITTLE_ENDIAN:
+		return le32_to_cpu(x);
+	case EDMAC_BIG_ENDIAN:
+		return be32_to_cpu(x);
+	}
+	return x;
+}
+
 /*
  * Program the hardware MAC address from dev->dev_addr.
  */
···
 		/* RX descriptor */
 		rxdesc = &mdp->rx_ring[i];
 		rxdesc->addr = (u32)skb->data & ~0x3UL;
-		rxdesc->status = cpu_to_le32(RD_RACT | RD_RFP);
+		rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
 
 		/* The size of the buffer is 16 byte boundary. */
 		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
···
 	mdp->dirty_rx = (u32) (i - RX_RING_SIZE);
 
 	/* Mark the last entry as wrapping the ring. */
-	rxdesc->status |= cpu_to_le32(RD_RDEL);
+	rxdesc->status |= cpu_to_edmac(mdp, RD_RDEL);
 
 	memset(mdp->tx_ring, 0, tx_ringsize);
 
···
 	for (i = 0; i < TX_RING_SIZE; i++) {
 		mdp->tx_skbuff[i] = NULL;
 		txdesc = &mdp->tx_ring[i];
-		txdesc->status = cpu_to_le32(TD_TFP);
+		txdesc->status = cpu_to_edmac(mdp, TD_TFP);
 		txdesc->buffer_length = 0;
 		if (i == 0) {
-			/* Rx descriptor address set */
+			/* Tx descriptor address set */
 			ctrl_outl((u32)txdesc, ioaddr + TDLAR);
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
 			ctrl_outl((u32)txdesc, ioaddr + TDFAR);
···
 		}
 	}
 
-	/* Rx descriptor address set */
+	/* Tx descriptor address set */
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
 	ctrl_outl((u32)txdesc, ioaddr + TDFXR);
 	ctrl_outl(0x1, ioaddr + TDFFR);
 #endif
 
-	txdesc->status |= cpu_to_le32(TD_TDLE);
+	txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
 }
 
 /* Get skb and descriptor buffer */
···
 	for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) {
 		entry = mdp->dirty_tx % TX_RING_SIZE;
 		txdesc = &mdp->tx_ring[entry];
-		if (txdesc->status & cpu_to_le32(TD_TACT))
+		if (txdesc->status & cpu_to_edmac(mdp, TD_TACT))
 			break;
 		/* Free the original skb. */
 		if (mdp->tx_skbuff[entry]) {
···
 			mdp->tx_skbuff[entry] = NULL;
 			freeNum++;
 		}
-		txdesc->status = cpu_to_le32(TD_TFP);
+		txdesc->status = cpu_to_edmac(mdp, TD_TFP);
 		if (entry >= TX_RING_SIZE - 1)
-			txdesc->status |= cpu_to_le32(TD_TDLE);
+			txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
 
 		mdp->stats.tx_packets++;
 		mdp->stats.tx_bytes += txdesc->buffer_length;
···
 	u32 desc_status, reserve = 0;
 
 	rxdesc = &mdp->rx_ring[entry];
-	while (!(rxdesc->status & cpu_to_le32(RD_RACT))) {
-		desc_status = le32_to_cpu(rxdesc->status);
+	while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
+		desc_status = edmac_to_cpu(mdp, rxdesc->status);
 		pkt_len = rxdesc->frame_length;
 
 		if (--boguscnt < 0)
···
 			mdp->stats.rx_packets++;
 			mdp->stats.rx_bytes += pkt_len;
 		}
-		rxdesc->status |= cpu_to_le32(RD_RACT);
+		rxdesc->status |= cpu_to_edmac(mdp, RD_RACT);
 		entry = (++mdp->cur_rx) % RX_RING_SIZE;
 	}
 
···
 		}
 		if (entry >= RX_RING_SIZE - 1)
 			rxdesc->status |=
-				cpu_to_le32(RD_RACT | RD_RFP | RD_RDEL);
+				cpu_to_edmac(mdp, RD_RACT | RD_RFP | RD_RDEL);
 		else
 			rxdesc->status |=
-				cpu_to_le32(RD_RACT | RD_RFP);
+				cpu_to_edmac(mdp, RD_RACT | RD_RFP);
 	}
 
 	/* Restart Rx engine if stopped. */
···
 		txdesc->buffer_length = skb->len;
 
 	if (entry >= TX_RING_SIZE - 1)
-		txdesc->status |= cpu_to_le32(TD_TACT | TD_TDLE);
+		txdesc->status |= cpu_to_edmac(mdp, TD_TACT | TD_TDLE);
 	else
-		txdesc->status |= cpu_to_le32(TD_TACT);
+		txdesc->status |= cpu_to_edmac(mdp, TD_TACT);
 
 	mdp->cur_tx++;
 
···
 	struct resource *res;
 	struct net_device *ndev = NULL;
 	struct sh_eth_private *mdp;
+	struct sh_eth_plat_data *pd;
 
 	/* get base addr */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
···
 	mdp = netdev_priv(ndev);
 	spin_lock_init(&mdp->lock);
 
+	pd = (struct sh_eth_plat_data *)(pdev->dev.platform_data);
 	/* get PHY ID */
-	mdp->phy_id = (int)pdev->dev.platform_data;
+	mdp->phy_id = pd->phy;
+	/* EDMAC endian */
+	mdp->edmac_endian = pd->edmac_endian;
 
 	/* set function */
 	ndev->open = sh_eth_open;
···
 
 	/* First device only init */
 	if (!devno) {
+#if defined(ARSTR)
 		/* reset device */
 		ctrl_outl(ARSTR_ARSTR, ARSTR);
 		mdelay(1);
+#endif
 
+#if defined(SH_TSU_ADDR)
 		/* TSU init (Init only)*/
 		sh_eth_tsu_init(SH_TSU_ADDR);
+#endif
 	}
 
 	/* network device register */
···
 	       ndev->name, CARDNAME, (u32) ndev->base_addr);
 
 	for (i = 0; i < 5; i++)
-		printk(KERN_INFO "%02X:", ndev->dev_addr[i]);
-	printk(KERN_INFO "%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq);
+		printk("%02X:", ndev->dev_addr[i]);
+	printk("%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq);
 
 	platform_set_drvdata(pdev, ndev);
 

drivers/net/sh_eth.h

···
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 
+#include <asm/sh_eth.h>
+
 #define CARDNAME	"sh-eth"
 #define TX_TIMEOUT	(5*HZ)
 #define TX_RING_SIZE	64	/* Tx ring size */
···
 
 #else /* CONFIG_CPU_SUBTYPE_SH7763 */
 # define RX_OFFSET 2	/* skb offset */
+#ifndef CONFIG_CPU_SUBTYPE_SH7619
 /* Chip base address */
 # define SH_TSU_ADDR  0xA7000804
 # define ARSTR		  0xA7000800
-
+#endif
 /* Chip Registers */
 /* E-DMAC */
 # define EDMR	0x0000
···
 	FCFTR_RFD1 = 0x00000002, FCFTR_RFD0 = 0x00000001,
 };
 #define FIFO_F_D_RFF	(FCFTR_RFF2|FCFTR_RFF1|FCFTR_RFF0)
+#ifndef CONFIG_CPU_SUBTYPE_SH7619
 #define FIFO_F_D_RFD	(FCFTR_RFD2|FCFTR_RFD1|FCFTR_RFD0)
+#else
+#define FIFO_F_D_RFD	(FCFTR_RFD0)
+#endif
 
 /* Transfer descriptor bit */
 enum TD_STS_BIT {
···
 #ifdef CONFIG_CPU_SUBTYPE_SH7763
 #define ECMR_CHG_DM	(ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\
 			ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
+#elif CONFIG_CPU_SUBTYPE_SH7619
+#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF)
 #else
-#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR ECMR_RXF | ECMR_TXF | ECMR_MCT)
+#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
 #endif
 
 /* ECSR */
···
 
 /* FDR */
 enum FIFO_SIZE_BIT {
+#ifndef CONFIG_CPU_SUBTYPE_SH7619
 	FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007,
+#else
+	FIFO_SIZE_T = 0x00000100, FIFO_SIZE_R = 0x00000001,
+#endif
 };
 enum phy_offsets {
 	PHY_CTRL = 0, PHY_STAT = 1, PHY_IDT1 = 2, PHY_IDT2 = 3,
···
 #endif
 	u32 addr;		/* TD2 */
 	u32 pad1;		/* padding data */
-};
+} __attribute__((aligned(2), packed));
 
 /*
  * The sh ether Rx buffer descriptors.
···
 #endif
 	u32 addr;		/* RD2 */
 	u32 pad0;		/* padding data */
-};
+} __attribute__((aligned(2), packed));
 
 struct sh_eth_private {
 	dma_addr_t rx_desc_dma;
···
 	u32 cur_rx, dirty_rx;	/* Producer/consumer ring indices */
 	u32 cur_tx, dirty_tx;
 	u32 rx_buf_sz;		/* Based on MTU+slack. */
+	int edmac_endian;
 	/* MII transceiver section. */
 	u32 phy_id;					/* PHY ID */
 	struct mii_bus *mii_bus;	/* MDIO bus control */

drivers/net/sky2.c

···
 			     PC_VAUX_ON | PC_VCC_OFF));
 }
 
-static void sky2_power_state(struct sky2_hw *hw, pci_power_t state)
-{
-	u16 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
-	int pex = pci_find_capability(hw->pdev, PCI_CAP_ID_EXP);
-	u32 reg;
-
-	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
-	switch (state) {
-	case PCI_D0:
-		break;
-
-	case PCI_D1:
-		power_control |= 1;
-		break;
-
-	case PCI_D2:
-		power_control |= 2;
-		break;
-
-	case PCI_D3hot:
-	case PCI_D3cold:
-		power_control |= 3;
-		if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
-			/* additional power saving measurements */
-			reg = sky2_pci_read32(hw, PCI_DEV_REG4);
-
-			/* set gating core clock for LTSSM in L1 state */
-			reg |= P_PEX_LTSSM_STAT(P_PEX_LTSSM_L1_STAT) |
-				/* auto clock gated scheme controlled by CLKREQ */
-				P_ASPM_A1_MODE_SELECT |
-				/* enable Gate Root Core Clock */
-				P_CLK_GATE_ROOT_COR_ENA;
-
-			if (pex && (hw->flags & SKY2_HW_CLK_POWER)) {
-				/* enable Clock Power Management (CLKREQ) */
-				u16 ctrl = sky2_pci_read16(hw, pex + PCI_EXP_DEVCTL);
-
-				ctrl |= PCI_EXP_DEVCTL_AUX_PME;
-				sky2_pci_write16(hw, pex + PCI_EXP_DEVCTL, ctrl);
-			} else
-				/* force CLKREQ Enable in Our4 (A1b only) */
-				reg |= P_ASPM_FORCE_CLKREQ_ENA;
-
-			/* set Mask Register for Release/Gate Clock */
-			sky2_pci_write32(hw, PCI_DEV_REG5,
-					 P_REL_PCIE_EXIT_L1_ST | P_GAT_PCIE_ENTER_L1_ST |
-					 P_REL_PCIE_RX_EX_IDLE | P_GAT_PCIE_RX_EL_IDLE |
-					 P_REL_GPHY_LINK_UP | P_GAT_GPHY_LINK_DOWN);
-		} else
-			sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_CLK_HALT);
-
-		/* put CPU into reset state */
-		sky2_write8(hw,  B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_RESET);
-		if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev == CHIP_REV_YU_SU_A0)
-			/* put CPU into halt state */
-			sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_HALTED);
-
-		if (pex && !(hw->flags & SKY2_HW_RAM_BUFFER)) {
-			reg = sky2_pci_read32(hw, PCI_DEV_REG1);
-			/* force to PCIe L1 */
-			reg |= PCI_FORCE_PEX_L1;
-			sky2_pci_write32(hw, PCI_DEV_REG1, reg);
-		}
-		break;
-
-	default:
-		dev_warn(&hw->pdev->dev, PFX "Invalid power state (%d) ",
-		       state);
-		return;
-	}
-
-	power_control |= PCI_PM_CTRL_PME_ENABLE;
-	/* Finally, set the new power state. */
-	sky2_pci_write32(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
-
-	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-	sky2_pci_read32(hw, B0_CTST);
-}
-
 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
 {
 	u16 reg;
···
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	sky2_pci_read32(hw, PCI_DEV_REG1);
+
+	if (hw->chip_id == CHIP_ID_YUKON_FE)
+		gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
+	else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
+		sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
 }
 
 static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
···
 		hw->flags = SKY2_HW_GIGABIT
 			| SKY2_HW_NEWER_PHY
 			| SKY2_HW_ADV_POWER_CTL;
-
-		/* check for Rev. A1 dev 4200 */
-		if (sky2_read16(hw, Q_ADDR(Q_XA1, Q_WM)) == 0)
-			hw->flags |= SKY2_HW_CLK_POWER;
 		break;
 
 	case CHIP_ID_YUKON_EX:
···
 	hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
 	if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
 		hw->flags |= SKY2_HW_FIBRE_PHY;
-
-	hw->pm_cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PM);
-	if (hw->pm_cap == 0) {
-		dev_err(&hw->pdev->dev, "cannot find PowerManagement capability\n");
-		return -EIO;
-	}
 
 	hw->ports = 1;
 	t8 = sky2_read8(hw, B2_Y2_HW_RES);
···
 
 	pci_save_state(pdev);
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
-	sky2_power_state(hw, pci_choose_state(pdev, state));
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
 	return 0;
 }
···
 	if (!hw)
 		return 0;
 
-	sky2_power_state(hw, PCI_D0);
+	err = pci_set_power_state(pdev, PCI_D0);
+	if (err)
+		goto out;
 
 	err = pci_restore_state(pdev);
 	if (err)
···
 	pci_enable_wake(pdev, PCI_D3cold, wol);
 
 	pci_disable_device(pdev);
-	sky2_power_state(hw, PCI_D3hot);
+	pci_set_power_state(pdev, PCI_D3hot);
 }
 
 static struct pci_driver sky2_driver = {

drivers/net/sky2.h

···
 #define SKY2_HW_NEW_LE		0x00000020	/* new LSOv2 format */
 #define SKY2_HW_AUTO_TX_SUM	0x00000040	/* new IP decode for Tx */
 #define SKY2_HW_ADV_POWER_CTL	0x00000080	/* additional PHY power regs */
-#define SKY2_HW_CLK_POWER	0x00000100	/* clock power management */
 
-	int		     pm_cap;
 	u8	     	     chip_id;
 	u8		     chip_rev;
 	u8		     pmd_type;

drivers/net/sun3_82586.c

···
 		int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
 		if(num_addrs > len)	{
 			printk("%s: switching to promisc. mode\n",dev->name);
-			dev->flags|=IFF_PROMISC;
+			cfg_cmd->promisc = 1;
 		}
 	}
 	if(dev->flags&IFF_PROMISC)
-	{
-			 cfg_cmd->promisc=1;
-			 dev->flags|=IFF_PROMISC;
-	}
+		cfg_cmd->promisc = 1;
 	cfg_cmd->carr_coll	= 0x00;
 
 	p->scb->cbl_offset	= make16(cfg_cmd);

drivers/net/usb/pegasus.c

···
 	}
 }
 
+static int pegasus_blacklisted(struct usb_device *udev)
+{
+	struct usb_device_descriptor *udd = &udev->descriptor;
+
+	/* Special quirk to keep the driver from handling the Belkin Bluetooth
+	 * dongle which happens to have the same ID.
+	 */
+	if ((udd->idVendor == VENDOR_BELKIN && udd->idProduct == 0x0121) &&
+	    (udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) &&
+	    (udd->bDeviceProtocol == 1))
+		return 1;
+
+	return 0;
+}
+
 static int pegasus_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
···
 	DECLARE_MAC_BUF(mac);
 
 	usb_get_dev(dev);
+
+	if (pegasus_blacklisted(dev)) {
+		res = -ENODEV;
+		goto out;
+	}
+
 	net = alloc_etherdev(sizeof(struct pegasus));
 	if (!net) {
 		dev_err(&intf->dev, "can't allocate %s\n", "device");

drivers/net/via-velocity.c

···
         spin_unlock_irq(&vptr->lock);
 }
 
+static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
+{
+	vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0;
+}
 
 /**
  *	velocity_rx_reset	-	handle a receive reset
···
 	struct mac_regs __iomem * regs = vptr->mac_regs;
 	int i;
 
-	vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0;
+	velocity_init_rx_ring_indexes(vptr);
 
 	/*
 	 *	Init state, all RD entries belong to the NIC
 	 */
 	for (i = 0; i < vptr->options.numrx; ++i)
-		vptr->rd_ring[i].rdesc0.len |= OWNED_BY_NIC;
+		vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC;
 
 	writew(vptr->options.numrx, &regs->RBRDU);
-	writel(vptr->rd_pool_dma, &regs->RDBaseLo);
+	writel(vptr->rx.pool_dma, &regs->RDBaseLo);
 	writew(0, &regs->RDIdx);
 	writew(vptr->options.numrx - 1, &regs->RDCSize);
 }
···
 
 		vptr->int_mask = INT_MASK_DEF;
 
-		writel(vptr->rd_pool_dma, &regs->RDBaseLo);
+		writel(vptr->rx.pool_dma, &regs->RDBaseLo);
 		writew(vptr->options.numrx - 1, &regs->RDCSize);
 		mac_rx_queue_run(regs);
 		mac_rx_queue_wake(regs);
 
 		writew(vptr->options.numtx - 1, &regs->TDCSize);
 
-		for (i = 0; i < vptr->num_txq; i++) {
-			writel(vptr->td_pool_dma[i], &regs->TDBaseLo[i]);
+		for (i = 0; i < vptr->tx.numq; i++) {
+			writel(vptr->tx.pool_dma[i], &regs->TDBaseLo[i]);
 			mac_tx_queue_run(regs, i);
 		}
 
···
 
 	vptr->pdev = pdev;
 	vptr->chip_id = info->chip_id;
-	vptr->num_txq = info->txqueue;
+	vptr->tx.numq = info->txqueue;
 	vptr->multicast_limit = MCAM_SIZE;
 	spin_lock_init(&vptr->lock);
 	INIT_LIST_HEAD(&vptr->list);
···
 }
 
 /**
- *	velocity_init_rings	-	set up DMA rings
+ *	velocity_init_dma_rings	-	set up DMA rings
  *	@vptr: Velocity to set up
  *
  *	Allocate PCI mapped DMA rings for the receive and transmit layer
  *	to use.
  */
 
-static int velocity_init_rings(struct velocity_info *vptr)
+static int velocity_init_dma_rings(struct velocity_info *vptr)
 {
 	struct velocity_opt *opt = &vptr->options;
 	const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc);
···
 	 * pci_alloc_consistent() fulfills the requirement for 64 bytes
 	 * alignment
 	 */
-	pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->num_txq +
+	pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq +
 				    rx_ring_size, &pool_dma);
 	if (!pool) {
 		dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n",
···
 		return -ENOMEM;
 	}
 
-	vptr->rd_ring = pool;
-	vptr->rd_pool_dma = pool_dma;
+	vptr->rx.ring = pool;
+	vptr->rx.pool_dma = pool_dma;
 
 	pool += rx_ring_size;
 	pool_dma += rx_ring_size;
 
-	for (i = 0; i < vptr->num_txq; i++) {
-		vptr->td_rings[i] = pool;
-		vptr->td_pool_dma[i] = pool_dma;
+	for (i = 0; i < vptr->tx.numq; i++) {
+		vptr->tx.rings[i] = pool;
+		vptr->tx.pool_dma[i] = pool_dma;
 		pool += tx_ring_size;
 		pool_dma += tx_ring_size;
 	}
···
 }
 
 /**
- *	velocity_free_rings	-	free PCI ring pointers
+ *	velocity_free_dma_rings	-	free PCI ring pointers
  *	@vptr: Velocity to free from
  *
  *	Clean up the PCI ring buffers allocated to this velocity.
  */
 
-static void velocity_free_rings(struct velocity_info *vptr)
+static void velocity_free_dma_rings(struct velocity_info *vptr)
 {
 	const int size = vptr->options.numrx * sizeof(struct rx_desc) +
-		vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
+		vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
 
-	pci_free_consistent(vptr->pdev, size, vptr->rd_ring, vptr->rd_pool_dma);
+	pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
 }
 
 static void velocity_give_many_rx_descs(struct velocity_info *vptr)
···
 	 * RD number must be equal to 4X per hardware spec
 	 * (programming guide rev 1.20, p.13)
 	 */
-	if (vptr->rd_filled < 4)
+	if (vptr->rx.filled < 4)
 		return;
 
 	wmb();
 
-	unusable = vptr->rd_filled & 0x0003;
-	dirty = vptr->rd_dirty - unusable;
-	for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
+	unusable = vptr->rx.filled & 0x0003;
+	dirty = vptr->rx.dirty - unusable;
+	for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
 		dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
-		vptr->rd_ring[dirty].rdesc0.len |= OWNED_BY_NIC;
+		vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
 	}
 
-	writew(vptr->rd_filled & 0xfffc, &regs->RBRDU);
-	vptr->rd_filled = unusable;
+	writew(vptr->rx.filled & 0xfffc, &regs->RBRDU);
+	vptr->rx.filled = unusable;
 }
 
 static int velocity_rx_refill(struct velocity_info *vptr)
 {
-	int dirty = vptr->rd_dirty, done = 0;
+	int dirty = vptr->rx.dirty, done = 0;
 
 	do {
-		struct rx_desc *rd = vptr->rd_ring + dirty;
+		struct rx_desc *rd = vptr->rx.ring + dirty;
 
 		/* Fine for an all zero Rx desc at init time as well */
 		if (rd->rdesc0.len & OWNED_BY_NIC)
 			break;
 
-		if (!vptr->rd_info[dirty].skb) {
+		if (!vptr->rx.info[dirty].skb) {
 			if (velocity_alloc_rx_buf(vptr, dirty) < 0)
 				break;
 		}
 		done++;
 		dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
-	} while (dirty != vptr->rd_curr);
+	} while (dirty != vptr->rx.curr);
 
 	if (done) {
-		vptr->rd_dirty = dirty;
-		vptr->rd_filled += done;
+		vptr->rx.dirty = dirty;
+		vptr->rx.filled += done;
 	}
 
 	return done;
···
 
 static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
 {
-	vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
+	vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
 }
 
 /**
···
 {
 	int ret = -ENOMEM;
 
-	vptr->rd_info = kcalloc(vptr->options.numrx,
+	vptr->rx.info = kcalloc(vptr->options.numrx,
 				sizeof(struct velocity_rd_info), GFP_KERNEL);
-	if (!vptr->rd_info)
+	if (!vptr->rx.info)
 		goto out;
 
-	vptr->rd_filled = vptr->rd_dirty = vptr->rd_curr = 0;
+	velocity_init_rx_ring_indexes(vptr);
 
 	if (velocity_rx_refill(vptr) != vptr->options.numrx) {
 		VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
···
 {
 	int i;
 
-	if (vptr->rd_info == NULL)
+	if (vptr->rx.info == NULL)
 		return;
 
 	for (i = 0; i < vptr->options.numrx; i++) {
-		struct velocity_rd_info *rd_info = &(vptr->rd_info[i]);
-		struct rx_desc *rd = vptr->rd_ring + i;
+		struct velocity_rd_info *rd_info = &(vptr->rx.info[i]);
+		struct rx_desc *rd = vptr->rx.ring + i;
 
 		memset(rd, 0, sizeof(*rd));
 
 		if (!rd_info->skb)
 			continue;
-		pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz,
+		pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
 				 PCI_DMA_FROMDEVICE);
 		rd_info->skb_dma = (dma_addr_t) NULL;
 
···
 		rd_info->skb = NULL;
 	}
 
-	kfree(vptr->rd_info);
-	vptr->rd_info = NULL;
+	kfree(vptr->rx.info);
+	vptr->rx.info = NULL;
 }
 
 /**
···
 	unsigned int j;
 
 	/* Init the TD ring entries */
-	for (j = 0; j < vptr->num_txq; j++) {
-		curr = vptr->td_pool_dma[j];
+	for (j = 0; j < vptr->tx.numq; j++) {
+		curr = vptr->tx.pool_dma[j];
 
-		vptr->td_infos[j] = kcalloc(vptr->options.numtx,
+		vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
 					    sizeof(struct velocity_td_info),
 					    GFP_KERNEL);
-		if (!vptr->td_infos[j])	{
+		if (!vptr->tx.infos[j])	{
 			while(--j >= 0)
-				kfree(vptr->td_infos[j]);
+				kfree(vptr->tx.infos[j]);
 			return -ENOMEM;
 		}
 
-		vptr->td_tail[j] = vptr->td_curr[j] = vptr->td_used[j] = 0;
+		vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0;
 	}
 	return 0;
 }
···
 static void velocity_free_td_ring_entry(struct velocity_info *vptr,
 							 int q, int n)
 {
-	struct velocity_td_info * td_info = &(vptr->td_infos[q][n]);
+	struct velocity_td_info * td_info = &(vptr->tx.infos[q][n]);
 	int i;
 
 	if (td_info == NULL)
···
 {
 	int i, j;
 
-	for (j = 0; j < vptr->num_txq; j++) {
-		if (vptr->td_infos[j] == NULL)
+	for (j = 0; j < vptr->tx.numq; j++) {
+		if (vptr->tx.infos[j] == NULL)
 			continue;
 		for (i = 0; i < vptr->options.numtx; i++) {
 			velocity_free_td_ring_entry(vptr, j, i);
 
 		}
-		kfree(vptr->td_infos[j]);
-		vptr->td_infos[j] = NULL;
+		kfree(vptr->tx.infos[j]);
+		vptr->tx.infos[j] = NULL;
 	}
 }
 
···
 static int velocity_rx_srv(struct velocity_info *vptr, int status)
 {
 	struct net_device_stats *stats = &vptr->stats;
-	int rd_curr = vptr->rd_curr;
+	int rd_curr = vptr->rx.curr;
 	int works = 0;
 
 	do {
-		struct rx_desc *rd = vptr->rd_ring + rd_curr;
+		struct rx_desc *rd = vptr->rx.ring + rd_curr;
 
-		if (!vptr->rd_info[rd_curr].skb)
+		if (!vptr->rx.info[rd_curr].skb)
 			break;
 
 		if (rd->rdesc0.len & OWNED_BY_NIC)
···
 			rd_curr = 0;
 	} while (++works <= 15);
 
-	vptr->rd_curr = rd_curr;
+	vptr->rx.curr = rd_curr;
 
 	if ((works > 0) && (velocity_rx_refill(vptr) > 0))
 		velocity_give_many_rx_descs(vptr);
···
 {
 	void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
 	struct net_device_stats *stats = &vptr->stats;
-	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
-	struct rx_desc *rd = &(vptr->rd_ring[idx]);
+	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+	struct rx_desc *rd = &(vptr->rx.ring[idx]);
 	int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
 	struct sk_buff *skb;
 
···
 	skb = rd_info->skb;
 
 	pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma,
-				    vptr->rx_buf_sz, PCI_DMA_FROMDEVICE);
+				    vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
 
 	/*
 	 *	Drop frame not meeting IEEE 802.3
···
 		rd_info->skb = NULL;
 	}
 
-	pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz,
+	pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
 		   PCI_DMA_FROMDEVICE);
 
 	skb_put(skb, pkt_len - 4);
···
 
 static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
 {
-	struct rx_desc *rd = &(vptr->rd_ring[idx]);
-	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
+	struct rx_desc *rd = &(vptr->rx.ring[idx]);
+	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
 
-	rd_info->skb = netdev_alloc_skb(vptr->dev, vptr->rx_buf_sz + 64);
+	rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64);
 	if (rd_info->skb == NULL)
 		return -ENOMEM;
 
···
 	 *	64byte alignment.
 	 */
 	skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
-	rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data, vptr->rx_buf_sz, PCI_DMA_FROMDEVICE);
+	rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
+					vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
 
 	/*
 	 *	Fill in the descriptor to match
- 	 */
+	 */
 
 	*((u32 *) & (rd->rdesc0)) = 0;
-	rd->size = cpu_to_le16(vptr->rx_buf_sz) | RX_INTEN;
+	rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
 	rd->pa_low = cpu_to_le32(rd_info->skb_dma);
 	rd->pa_high = 0;
 	return 0;
···
 	struct velocity_td_info *tdinfo;
 	struct net_device_stats *stats = &vptr->stats;
 
-	for (qnum = 0; qnum < vptr->num_txq; qnum++) {
-		for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0;
+	for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
+		for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
 			idx = (idx + 1) % vptr->options.numtx) {
 
 			/*
 			 *	Get Tx Descriptor
 			 */
-			td = &(vptr->td_rings[qnum][idx]);
-			tdinfo = &(vptr->td_infos[qnum][idx]);
+			td = &(vptr->tx.rings[qnum][idx]);
+			tdinfo = &(vptr->tx.infos[qnum][idx]);
 
 			if (td->tdesc0.len & OWNED_BY_NIC)
 				break;
···
 				stats->tx_bytes += tdinfo->skb->len;
 			}
 			velocity_free_tx_buf(vptr, tdinfo);
-			vptr->td_used[qnum]--;
+			vptr->tx.used[qnum]--;
 		}
-		vptr->td_tail[qnum] = idx;
+		vptr->tx.tail[qnum] = idx;
 
 		if (AVAIL_TD(vptr, qnum) < 1) {
 			full = 1;
···
 	tdinfo->skb = NULL;
 }
 
+static int velocity_init_rings(struct velocity_info *vptr, int mtu)
+{
+	int ret;
+
+	velocity_set_rxbufsize(vptr, mtu);
+
+	ret = velocity_init_dma_rings(vptr);
+	if (ret < 0)
+		goto out;
+
+	ret = velocity_init_rd_ring(vptr);
+	if (ret < 0)
+		goto err_free_dma_rings_0;
+
+	ret = velocity_init_td_ring(vptr);
+	if (ret < 0)
+		goto err_free_rd_ring_1;
+out:
+	return ret;
+
+err_free_rd_ring_1:
+	velocity_free_rd_ring(vptr);
+err_free_dma_rings_0:
+	velocity_free_dma_rings(vptr);
+	goto out;
+}
+
+static void velocity_free_rings(struct velocity_info *vptr)
+{
+	velocity_free_td_ring(vptr);
+	velocity_free_rd_ring(vptr);
+	velocity_free_dma_rings(vptr);
+}
+
 /**
  *	velocity_open		-	interface activation callback
  *	@dev: network layer device to open
···
 	struct velocity_info *vptr = netdev_priv(dev);
 	int ret;
 
-	velocity_set_rxbufsize(vptr, dev->mtu);
-
-	ret = velocity_init_rings(vptr);
+	ret = velocity_init_rings(vptr, dev->mtu);
 	if (ret < 0)
 		goto out;
-
-	ret = velocity_init_rd_ring(vptr);
-	if (ret < 0)
-		goto err_free_desc_rings;
-
-	ret = velocity_init_td_ring(vptr);
-	if (ret < 0)
-		goto err_free_rd_ring;
 
 	/* Ensure chip is running */
 	pci_set_power_state(vptr->pdev, PCI_D0);
···
 	if (ret < 0) {
 		/* Power down the chip */
 		pci_set_power_state(vptr->pdev, PCI_D3hot);
-		goto err_free_td_ring;
+		velocity_free_rings(vptr);
+		goto out;
 	}
 
 	mac_enable_int(vptr->mac_regs);
···
 	vptr->flags |= VELOCITY_FLAGS_OPENED;
 out:
 	return ret;
-
-err_free_td_ring:
-	velocity_free_td_ring(vptr);
-err_free_rd_ring:
-	velocity_free_rd_ring(vptr);
-err_free_desc_rings:
-	velocity_free_rings(vptr);
-	goto out;
 }
 
 /**
···
 static int velocity_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct velocity_info *vptr = netdev_priv(dev);
-	unsigned long flags;
-	int oldmtu = dev->mtu;
 	int ret = 0;
 
 	if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) {
 		VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n",
 				vptr->dev->name);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_0;
 	}
 
 	if (!netif_running(dev)) {
 		dev->mtu = new_mtu;
-		return 0;
+		goto out_0;
 	}
 
-	if (new_mtu != oldmtu) {
+	if (dev->mtu != new_mtu) {
+		struct velocity_info *tmp_vptr;
+		unsigned long flags;
+		struct rx_info rx;
+		struct tx_info tx;
+
+		tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL);
+		if (!tmp_vptr) {
+			ret = -ENOMEM;
+			goto out_0;
+		}
+
+		tmp_vptr->dev = dev;
+		tmp_vptr->pdev = vptr->pdev;
+		tmp_vptr->options = vptr->options;
+		tmp_vptr->tx.numq = vptr->tx.numq;
+
+		ret = velocity_init_rings(tmp_vptr, new_mtu);
+		if (ret < 0)
+			goto out_free_tmp_vptr_1;
+
 		spin_lock_irqsave(&vptr->lock, flags);
 
 		netif_stop_queue(dev);
 		velocity_shutdown(vptr);
 
-		velocity_free_td_ring(vptr);
-		velocity_free_rd_ring(vptr);
+		rx = vptr->rx;
+		tx = vptr->tx;
+
+		vptr->rx = tmp_vptr->rx;
+		vptr->tx = tmp_vptr->tx;
+
+		tmp_vptr->rx = rx;
+		tmp_vptr->tx = tx;
 
 		dev->mtu = new_mtu;
 
-		velocity_set_rxbufsize(vptr, new_mtu);
-
-		ret = velocity_init_rd_ring(vptr);
-		if (ret < 0)
-			goto out_unlock;
-
-		ret = velocity_init_td_ring(vptr);
-		if (ret < 0)
-			goto out_unlock;
+		velocity_give_many_rx_descs(vptr);
 
 		velocity_init_registers(vptr, VELOCITY_INIT_COLD);
 
 		mac_enable_int(vptr->mac_regs);
 		netif_start_queue(dev);
-out_unlock:
-		spin_unlock_irqrestore(&vptr->lock, flags);
-	}
 
+		spin_unlock_irqrestore(&vptr->lock, flags);
+
+		velocity_free_rings(tmp_vptr);
+
+out_free_tmp_vptr_1:
+		kfree(tmp_vptr);
+	}
+out_0:
 	return ret;
 }
 
···
 	/* Power down the chip */
 	pci_set_power_state(vptr->pdev, PCI_D3hot);
 
-	/* Free the resources */
-	velocity_free_td_ring(vptr);
-	velocity_free_rd_ring(vptr);
 	velocity_free_rings(vptr);
 
 	vptr->flags &= (~VELOCITY_FLAGS_OPENED);
···
 
 	spin_lock_irqsave(&vptr->lock, flags);
 
-	index = vptr->td_curr[qnum];
-	td_ptr = &(vptr->td_rings[qnum][index]);
-	tdinfo = &(vptr->td_infos[qnum][index]);
+	index = vptr->tx.curr[qnum];
+	td_ptr = &(vptr->tx.rings[qnum][index]);
+	tdinfo = &(vptr->tx.infos[qnum][index]);
 
 	td_ptr->tdesc1.TCR = TCR0_TIC;
 	td_ptr->td_buf[0].size &= ~TD_QUEUE;
···
 			skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
 			tdinfo->skb_dma[0] = tdinfo->buf_dma;
 			td_ptr->tdesc0.len = len;
-			td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-			td_ptr->td_buf[0].pa_high = 0;
-			td_ptr->td_buf[0].size = len;	/* queue is 0 anyway */
+			td_ptr->tx.buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+			td_ptr->tx.buf[0].pa_high = 0;
+			td_ptr->tx.buf[0].size = len;	/* queue is 0 anyway */
 			tdinfo->nskb_dma = 1;
 		} else {
 			int i = 0;
···
 			td_ptr->tdesc0.len = len;
 
 			/* FIXME: support 48bit DMA later */
-			td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
-			td_ptr->td_buf[i].pa_high = 0;
-			td_ptr->td_buf[i].size = cpu_to_le16(skb_headlen(skb));
+			td_ptr->tx.buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
+			td_ptr->tx.buf[i].pa_high = 0;
+			td_ptr->tx.buf[i].size = cpu_to_le16(skb_headlen(skb));
 
 			for (i = 0; i < nfrags; i++) {
 				skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
···
 
 				tdinfo->skb_dma[i + 1] = pci_map_single(vptr->pdev, addr, frag->size, PCI_DMA_TODEVICE);
 
-				td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
-				td_ptr->td_buf[i + 1].pa_high = 0;
-				td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size);
+				td_ptr->tx.buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
+				td_ptr->tx.buf[i + 1].pa_high = 0;
+				td_ptr->tx.buf[i + 1].size = cpu_to_le16(frag->size);
 			}
 			tdinfo->nskb_dma = i - 1;
 		}
···
 		if (prev < 0)
 			prev = vptr->options.numtx - 1;
 		td_ptr->tdesc0.len |= OWNED_BY_NIC;
-		vptr->td_used[qnum]++;
-		vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
+		vptr->tx.used[qnum]++;
+		vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
 
 		if (AVAIL_TD(vptr, qnum) < 1)
 			netif_stop_queue(dev);
 
-		td_ptr = &(vptr->td_rings[qnum][prev]);
+		td_ptr = &(vptr->tx.rings[qnum][prev]);
 		td_ptr->td_buf[0].size |= TD_QUEUE;
 		mac_tx_queue_wake(vptr->mac_regs, qnum);
 	}
···
 
 	velocity_tx_srv(vptr, 0);
 
-	for (i = 0; i < vptr->num_txq; i++) {
-		if (vptr->td_used[i]) {
+	for (i = 0; i < vptr->tx.numq; i++) {
+		if (vptr->tx.used[i]) {
 			mac_tx_queue_wake(vptr->mac_regs, i);
 		}
 	}

drivers/net/via-velocity.h

···
 	u32 flags;
 };
 
+#define AVAIL_TD(p,q)   ((p)->options.numtx-((p)->tx.used[(q)]))
+
+#define GET_RD_BY_IDX(vptr, idx)   (vptr->rd_ring[idx])
+
 struct velocity_info {
 	struct list_head list;
 
 	struct pci_dev *pdev;
 	struct net_device *dev;
 	struct net_device_stats stats;
-
-	dma_addr_t rd_pool_dma;
-	dma_addr_t td_pool_dma[TX_QUEUE_NO];
 
 	struct vlan_group    *vlgrp;
 	u8 ip_addr[4];
···
 	unsigned long memaddr;
 	unsigned long ioaddr;
 
-	u8 rev_id;
+	struct tx_info {
+		int numq;
 
-#define AVAIL_TD(p,q)   ((p)->options.numtx-((p)->td_used[(q)]))
+		/* FIXME: the locality of the data seems rather poor. */
+		int used[TX_QUEUE_NO];
+		int curr[TX_QUEUE_NO];
+		int tail[TX_QUEUE_NO];
+		struct tx_desc *rings[TX_QUEUE_NO];
+		struct velocity_td_info *infos[TX_QUEUE_NO];
+		dma_addr_t pool_dma[TX_QUEUE_NO];
+	} tx;
 
-	int num_txq;
+	struct rx_info {
+		int buf_sz;
 
-	volatile int td_used[TX_QUEUE_NO];
-	int td_curr[TX_QUEUE_NO];
-	int td_tail[TX_QUEUE_NO];
-	struct tx_desc *td_rings[TX_QUEUE_NO];
-	struct velocity_td_info *td_infos[TX_QUEUE_NO];
+		int dirty;
+		int curr;
+		u32 filled;
+		struct rx_desc *ring;
+		struct velocity_rd_info *info;	/* It's an array */
+		dma_addr_t pool_dma;
+	} rx;
 
-	int rd_curr;
-	int rd_dirty;
-	u32 rd_filled;
-	struct rx_desc *rd_ring;
-	struct velocity_rd_info *rd_info;	/* It's an array */
-
-#define GET_RD_BY_IDX(vptr, idx)   (vptr->rd_ring[idx])
 	u32 mib_counter[MAX_HW_MIB_COUNTER];
 	struct velocity_opt options;
 
···
 
 	u32 flags;
 
-	int rx_buf_sz;
 	u32 mii_status;
 	u32 phy_id;
 	int multicast_limit;
···
 	struct velocity_context context;
 
 	u32 ticks;
-	u32 rx_bytes;
 
+	u8 rev_id;
 };
 
 /**

drivers/net/wan/Kconfig

···
 # There is no way to detect a comtrol sv11 - force it modular for now.
 config HOSTESS_SV11
 	tristate "Comtrol Hostess SV-11 support"
-	depends on ISA && m && ISA_DMA_API && INET
+	depends on ISA && m && ISA_DMA_API && INET && HDLC
 	help
 	  Driver for Comtrol Hostess SV-11 network card which
 	  operates on low speed synchronous serial links at up to
···
 # The COSA/SRP driver has not been tested as non-modular yet.
 config COSA
 	tristate "COSA/SRP sync serial boards support"
-	depends on ISA && m && ISA_DMA_API
+	depends on ISA && m && ISA_DMA_API && HDLC
 	---help---
 	  Driver for COSA and SRP synchronous serial boards.
 
···
 #
 config LANMEDIA
 	tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
-	depends on PCI && VIRT_TO_BUS
+	depends on PCI && VIRT_TO_BUS && HDLC
 	---help---
 	  Driver for the following Lan Media family of serial boards:
 
···
 	  - LMC 5245 board connects directly to a T3 circuit saving the
 	  additional external hardware.
 
-	  To change setting such as syncPPP vs Cisco HDLC or clock source you
-	  will need lmcctl.  It is available at <ftp://ftp.lanmedia.com/>
-	  (broken link).
+	  To change setting such as clock source you will need lmcctl.
+	  It is available at <ftp://ftp.lanmedia.com/> (broken link).
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called lmc.
···
 # There is no way to detect a Sealevel board. Force it modular
 config SEALEVEL_4021
 	tristate "Sealevel Systems 4021 support"
-	depends on ISA && m && ISA_DMA_API && INET
+	depends on ISA && m && ISA_DMA_API && INET && HDLC
 	help
 	  This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
 
···
 	depends on HDLC
 	help
 	  Generic HDLC driver supporting PPP over WAN connections.
-
-	  It will be replaced by new PPP implementation in Linux 2.6.26.
 
 	  If unsure, say N.
 

drivers/net/wan/Makefile

···
 pc300-$(CONFIG_PC300_MLPPP)	+= pc300_tty.o
 pc300-objs			:= $(pc300-y)
 
-obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	syncppp.o	hostess_sv11.o
-obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	syncppp.o	sealevel.o
-obj-$(CONFIG_COSA)		+=		syncppp.o	cosa.o
-obj-$(CONFIG_FARSYNC)		+=		syncppp.o	farsync.o
-obj-$(CONFIG_DSCC4)             +=				dscc4.o
-obj-$(CONFIG_LANMEDIA)		+=		syncppp.o
+obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	hostess_sv11.o
+obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	sealevel.o
+obj-$(CONFIG_COSA)		+= cosa.o
+obj-$(CONFIG_FARSYNC)		+= farsync.o
+obj-$(CONFIG_DSCC4)             += dscc4.o
 obj-$(CONFIG_X25_ASY)		+= x25_asy.o
 
 obj-$(CONFIG_LANMEDIA)		+= lmc/

drivers/net/wan/cosa.c

···
 
 /*
  *  Copyright (C) 1995-1997  Jan "Yenya" Kasprzak <[e-mail]>
+ *  Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <[e-mail]>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
···
  *
  * The Linux driver (unlike the present *BSD drivers :-) can work even
  * for the COSA and SRP in one computer and allows each channel to work
- * in one of the three modes (character device, Cisco HDLC, Sync PPP).
+ * in one of the two modes (character or network device).
  *
  * AUTHOR
  *
···
  * The Comtrol Hostess SV11 driver by Alan Cox
  * The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox
  */
-/*
- *     5/25/1999 : Marcelo Tosatti <[e-mail]>
- *             fixed a deadlock in cosa_sppp_open
- */
-
-/* ---------- Headers, macros, data structures ---------- */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
···
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/netdevice.h>
···
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <linux/smp_lock.h>
-
-#undef COSA_SLOW_IO	/* for testing purposes only */
-
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
 
-#include <net/syncppp.h>
+#undef COSA_SLOW_IO	/* for testing purposes only */
+
 #include "cosa.h"
 
 /* Maximum length of the identification string. */
···
 /* Per-channel data structure */
 
 struct channel_data {
-	void *if_ptr;	/* General purpose pointer (used by SPPP) */
 	int usage;	/* Usage count; >0 for chrdev, -1 for netdev */
 	int num;	/* Number of the channel */
 	struct cosa_data *cosa;	/* Pointer to the per-card structure */
···
 	wait_queue_head_t txwaitq, rxwaitq;
 	int tx_status, rx_status;
 
-	/* SPPP/HDLC device parts */
-	struct ppp_device pppdev;
+	/* generic HDLC device parts */
+	struct net_device *netdev;
 	struct sk_buff *rx_skb, *tx_skb;
-	struct net_device_stats stats;
 };
 
 /* cosa->firmware_status bits */
···
 static void cosa_kick(struct cosa_data *cosa);
 static int cosa_dma_able(struct channel_data *chan, char *buf, int data);
 
-/* SPPP/HDLC stuff */
-static void sppp_channel_init(struct channel_data *chan);
-static void sppp_channel_delete(struct channel_data *chan);
-static int cosa_sppp_open(struct net_device *d);
-static int cosa_sppp_close(struct net_device *d);
-static void cosa_sppp_timeout(struct net_device *d);
-static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *d);
-static char *sppp_setup_rx(struct channel_data *channel, int size);
-static int sppp_rx_done(struct channel_data *channel);
-static int sppp_tx_done(struct channel_data *channel, int size);
-static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-static struct net_device_stats *cosa_net_stats(struct net_device *dev);
+/* Network device stuff */
+static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
+			   unsigned short parity);
+static int cosa_net_open(struct net_device *d);
+static int cosa_net_close(struct net_device *d);
+static void cosa_net_timeout(struct net_device *d);
+static int cosa_net_tx(struct sk_buff *skb, struct net_device *d);
+static char *cosa_net_setup_rx(struct channel_data *channel, int size);
+static int cosa_net_rx_done(struct channel_data *channel);
+static int cosa_net_tx_done(struct channel_data *channel, int size);
+static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 
 /* Character device */
-static void chardev_channel_init(struct channel_data *chan);
 static char *chrdev_setup_rx(struct channel_data *channel, int size);
 static int chrdev_rx_done(struct channel_data *channel);
 static int chrdev_tx_done(struct channel_data *channel, int size);
···
 static void debug_status_out(struct cosa_data *cosa, int status);
 #endif
 
-
+static inline struct channel_data* dev_to_chan(struct net_device *dev)
+{
+	return (struct channel_data *)dev_to_hdlc(dev)->priv;
+}
+
 /* ---------- Initialization stuff ---------- */
 
 static int __init cosa_init(void)
 {
 	int i, err = 0;
 
-	printk(KERN_INFO "cosa v1.08 (c) 1997-2000 Jan Kasprzak <[e-mail]>\n");
-#ifdef CONFIG_SMP
-	printk(KERN_INFO "cosa: SMP found. Please mail any success/failure reports to the author.\n");
-#endif
 	if (cosa_major > 0) {
 		if (register_chrdev(cosa_major, "cosa", &cosa_fops)) {
 			printk(KERN_WARNING "cosa: unable to get major %d\n",
···
 				      NULL, "cosa%d", i);
 	err = 0;
 	goto out;
-	
+
 out_chrdev:
 	unregister_chrdev(cosa_major, "cosa");
 out:
···
 {
 	struct cosa_data *cosa;
 	int i;
-	printk(KERN_INFO "Unloading the cosa module\n");
 
-	for (i=0; i<nr_cards; i++)
+	for (i = 0; i < nr_cards; i++)
 		device_destroy(cosa_class, MKDEV(cosa_major, i));
 	class_destroy(cosa_class);
-	for (cosa=cosa_cards; nr_cards--; cosa++) {
+
+	for (cosa = cosa_cards; nr_cards--; cosa++) {
 		/* Clean up the per-channel data */
-		for (i=0; i<cosa->nchannels; i++) {
+		for (i = 0; i < cosa->nchannels; i++) {
 			/* Chardev driver has no alloc'd per-channel data */
-			sppp_channel_delete(cosa->chan+i);
+			unregister_hdlc_device(cosa->chan[i].netdev);
+			free_netdev(cosa->chan[i].netdev);
 		}
 		/* Clean up the per-card data */
 		kfree(cosa->chan);
 		kfree(cosa->bouncebuf);
 		free_irq(cosa->irq, cosa);
 		free_dma(cosa->dma);
-		release_region(cosa->datareg,is_8bit(cosa)?2:4);
+		release_region(cosa->datareg, is_8bit(cosa) ? 2 : 4);
 	}
 	unregister_chrdev(cosa_major, "cosa");
 }
 module_exit(cosa_exit);
 
-/*
- * This function should register all the net devices needed for the
- * single channel.
- */
-static __inline__ void channel_init(struct channel_data *chan)
-{
-	sprintf(chan->name, "cosa%dc%d", chan->cosa->num, chan->num);
-
-	/* Initialize the chardev data structures */
-	chardev_channel_init(chan);
-
-	/* Register the sppp interface */
-	sppp_channel_init(chan);
-}
-	
 static int cosa_probe(int base, int irq, int dma)
 {
 	struct cosa_data *cosa = cosa_cards+nr_cards;
···
 	/* Initialize the per-channel data */
 	cosa->chan = kcalloc(cosa->nchannels, sizeof(struct channel_data), GFP_KERNEL);
 	if (!cosa->chan) {
-	        err = -ENOMEM;
+		err = -ENOMEM;
 		goto err_out3;
 	}
-	for (i=0; i<cosa->nchannels; i++) {
-		cosa->chan[i].cosa = cosa;
-		cosa->chan[i].num = i;
-		channel_init(cosa->chan+i);
+
+	for (i = 0; i < cosa->nchannels; i++) {
+		struct channel_data *chan = &cosa->chan[i];
+
+		chan->cosa = cosa;
+		chan->num = i;
+		sprintf(chan->name, "cosa%dc%d", chan->cosa->num, i);
+
+		/* Initialize the chardev data structures */
+		mutex_init(&chan->rlock);
+		init_MUTEX(&chan->wsem);
+
+		/* Register the network interface */
+		if (!(chan->netdev = alloc_hdlcdev(chan))) {
+			printk(KERN_WARNING "%s: alloc_hdlcdev failed.\n",
+			       chan->name);
+			goto err_hdlcdev;
+		}
+		dev_to_hdlc(chan->netdev)->attach = cosa_net_attach;
+		dev_to_hdlc(chan->netdev)->xmit = cosa_net_tx;
+		chan->netdev->open = cosa_net_open;
+		chan->netdev->stop = cosa_net_close;
+		chan->netdev->do_ioctl = cosa_net_ioctl;
+		chan->netdev->tx_timeout = cosa_net_timeout;
+		chan->netdev->watchdog_timeo = TX_TIMEOUT;
+		chan->netdev->base_addr = chan->cosa->datareg;
+		chan->netdev->irq = chan->cosa->irq;
+		chan->netdev->dma = chan->cosa->dma;
+		if (register_hdlc_device(chan->netdev)) {
+			printk(KERN_WARNING "%s: register_hdlc_device()"
+			       " failed.\n", chan->netdev->name);
+			free_netdev(chan->netdev);
+			goto err_hdlcdev;
+		}
 	}
 
 	printk (KERN_INFO "cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
···
 		cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels);
 
 	return nr_cards++;
+
+err_hdlcdev:
+	while (i-- > 0) {
+		unregister_hdlc_device(cosa->chan[i].netdev);
+		free_netdev(cosa->chan[i].netdev);
+	}
+	kfree(cosa->chan);
 err_out3:
 	kfree(cosa->bouncebuf);
 err_out2:
 	free_dma(cosa->dma);
 err_out1:
 	free_irq(cosa->irq, cosa);
-err_out:	
+err_out:
 	release_region(cosa->datareg,is_8bit(cosa)?2:4);
 	printk(KERN_NOTICE "cosa%d: allocating resources failed\n",
 	       cosa->num);
···
 }
 
 
-/*---------- SPPP/HDLC netdevice ---------- */
+/*---------- network device ---------- */
 
-static void cosa_setup(struct net_device *d)
+static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
+			   unsigned short parity)
 {
-	d->open = cosa_sppp_open;
-	d->stop = cosa_sppp_close;
-	d->hard_start_xmit = cosa_sppp_tx;
-	d->do_ioctl = cosa_sppp_ioctl;
-	d->get_stats = cosa_net_stats;
-	d->tx_timeout = cosa_sppp_timeout;
-	d->watchdog_timeo = TX_TIMEOUT;
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
-static void sppp_channel_init(struct channel_data *chan)
+static int cosa_net_open(struct net_device *dev)
 {
-	struct net_device *d;
-	chan->if_ptr = &chan->pppdev;
-	d = alloc_netdev(0, chan->name, cosa_setup);
-	if (!d) {
-		printk(KERN_WARNING "%s: alloc_netdev failed.\n", chan->name);
-		return;
-	}
-	chan->pppdev.dev = d;
-	d->base_addr = chan->cosa->datareg;
-	d->irq = chan->cosa->irq;
-	d->dma = chan->cosa->dma;
-	d->ml_priv = chan;
-	sppp_attach(&chan->pppdev);
-	if (register_netdev(d)) {
-		printk(KERN_WARNING "%s: register_netdev failed.\n", d->name);
-		sppp_detach(d);
-		free_netdev(d);
-		chan->pppdev.dev = NULL;
-		return;
-	}
-}
-
-static void sppp_channel_delete(struct channel_data *chan)
-{
-	unregister_netdev(chan->pppdev.dev);
-	sppp_detach(chan->pppdev.dev);
-	free_netdev(chan->pppdev.dev);
-	chan->pppdev.dev = NULL;
-}
-
-static int cosa_sppp_open(struct net_device *d)
-{
-	struct channel_data *chan = d->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 	int err;
 	unsigned long flags;
 
···
 	}
 	spin_lock_irqsave(&chan->cosa->lock, flags);
 	if (chan->usage != 0) {
-		printk(KERN_WARNING "%s: sppp_open called with usage count %d\n",
-			chan->name, chan->usage);
+		printk(KERN_WARNING "%s: cosa_net_open called with usage count"
+		       " %d\n", chan->name, chan->usage);
 		spin_unlock_irqrestore(&chan->cosa->lock, flags);
 		return -EBUSY;
 	}
-	chan->setup_rx = sppp_setup_rx;
-	chan->tx_done = sppp_tx_done;
-	chan->rx_done = sppp_rx_done;
-	chan->usage=-1;
+	chan->setup_rx = cosa_net_setup_rx;
+	chan->tx_done = cosa_net_tx_done;
+	chan->rx_done = cosa_net_rx_done;
+	chan->usage = -1;
 	chan->cosa->usage++;
 	spin_unlock_irqrestore(&chan->cosa->lock, flags);
 
-	err = sppp_open(d);
+	err = hdlc_open(dev);
 	if (err) {
 		spin_lock_irqsave(&chan->cosa->lock, flags);
-		chan->usage=0;
+		chan->usage = 0;
 		chan->cosa->usage--;
-		
 		spin_unlock_irqrestore(&chan->cosa->lock, flags);
 		return err;
 	}
 
-	netif_start_queue(d);
+	netif_start_queue(dev);
 	cosa_enable_rx(chan);
 	return 0;
 }
 
-static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev)
+static int cosa_net_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct channel_data *chan = dev->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 
 	netif_stop_queue(dev);
 
···
 	return 0;
 }
 
-static void cosa_sppp_timeout(struct net_device *dev)
+static void cosa_net_timeout(struct net_device *dev)
 {
-	struct channel_data *chan = dev->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 
 	if (test_bit(RXBIT, &chan->cosa->rxtx)) {
-		chan->stats.rx_errors++;
-		chan->stats.rx_missed_errors++;
+		chan->netdev->stats.rx_errors++;
+		chan->netdev->stats.rx_missed_errors++;
 	} else {
-		chan->stats.tx_errors++;
-		chan->stats.tx_aborted_errors++;
+		chan->netdev->stats.tx_errors++;
+		chan->netdev->stats.tx_aborted_errors++;
 	}
 	cosa_kick(chan->cosa);
 	if (chan->tx_skb) {
···
 	netif_wake_queue(dev);
 }
 
-static int cosa_sppp_close(struct net_device *d)
+static int cosa_net_close(struct net_device *dev)
 {
-	struct channel_data *chan = d->ml_priv;
+	struct channel_data *chan = dev_to_chan(dev);
 	unsigned long flags;
 
-	netif_stop_queue(d);
-	sppp_close(d);
+	netif_stop_queue(dev);
+	hdlc_close(dev);
 	cosa_disable_rx(chan);
 	spin_lock_irqsave(&chan->cosa->lock, flags);
 	if (chan->rx_skb) {
···
 		kfree_skb(chan->tx_skb);
 		chan->tx_skb = NULL;
 	}
-	chan->usage=0;
+	chan->usage = 0;
 	chan->cosa->usage--;
 	spin_unlock_irqrestore(&chan->cosa->lock, flags);
 	return 0;
 }
 
-static char *sppp_setup_rx(struct channel_data *chan, int size)
+static char *cosa_net_setup_rx(struct channel_data *chan, int size)
 {
 	/*
 	 * We can safely fall back to non-dma-able memory, because we have
···
 	if (chan->rx_skb == NULL) {
 		printk(KERN_NOTICE "%s: Memory squeeze, dropping packet\n",
 			chan->name);
-		chan->stats.rx_dropped++;
+		chan->netdev->stats.rx_dropped++;
 		return NULL;
 	}
-	chan->pppdev.dev->trans_start = jiffies;
+	chan->netdev->trans_start = jiffies;
 	return skb_put(chan->rx_skb, size);
 }
 
-static int sppp_rx_done(struct channel_data *chan)
+static int cosa_net_rx_done(struct channel_data *chan)
 {
 	if (!chan->rx_skb) {
 		printk(KERN_WARNING "%s: rx_done with empty skb!\n",
 			chan->name);
-		chan->stats.rx_errors++;
-		chan->stats.rx_frame_errors++;
+		chan->netdev->stats.rx_errors++;
+		chan->netdev->stats.rx_frame_errors++;
 		return 0;
 	}
-	chan->rx_skb->protocol = htons(ETH_P_WAN_PPP);
-	chan->rx_skb->dev = chan->pppdev.dev;
+	chan->rx_skb->protocol = hdlc_type_trans(chan->rx_skb, chan->netdev);
+	chan->rx_skb->dev = chan->netdev;
 	skb_reset_mac_header(chan->rx_skb);
-	chan->stats.rx_packets++;
-	chan->stats.rx_bytes += chan->cosa->rxsize;
+	chan->netdev->stats.rx_packets++;
+	chan->netdev->stats.rx_bytes += chan->cosa->rxsize;
 	netif_rx(chan->rx_skb);
 	chan->rx_skb = NULL;
-	chan->pppdev.dev->last_rx = jiffies;
+	chan->netdev->last_rx = jiffies;
 	return 0;
 }
 
 /* ARGSUSED */
-static int sppp_tx_done(struct channel_data *chan, int size)
+static int cosa_net_tx_done(struct channel_data *chan, int size)
 {
 	if (!chan->tx_skb) {
 		printk(KERN_WARNING "%s: tx_done with empty skb!\n",
 			chan->name);
-		chan->stats.tx_errors++;
-		chan->stats.tx_aborted_errors++;
+		chan->netdev->stats.tx_errors++;
+		chan->netdev->stats.tx_aborted_errors++;
 		return 1;
 	}
 	dev_kfree_skb_irq(chan->tx_skb);
 	chan->tx_skb = NULL;
-	chan->stats.tx_packets++;
-	chan->stats.tx_bytes += size;
-	netif_wake_queue(chan->pppdev.dev);
+	chan->netdev->stats.tx_packets++;
+	chan->netdev->stats.tx_bytes += size;
+	netif_wake_queue(chan->netdev);
 	return 1;
 }
 
-static struct net_device_stats *cosa_net_stats(struct net_device *dev)
-{
-	struct channel_data *chan = dev->ml_priv;
-	return &chan->stats;
-}
-
-
 /*---------- Character device ---------- */
-
-static void chardev_channel_init(struct channel_data *chan)
-{
-	mutex_init(&chan->rlock);
-	init_MUTEX(&chan->wsem);
-}
 
 static ssize_t cosa_read(struct file *file,
 	char __user *buf, size_t count, loff_t *ppos)
···
 	return -ENOIOCTLCMD;
 }
 
-static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr,
-	int cmd)
+static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	int rv;
-	struct channel_data *chan = dev->ml_priv;
-	rv = cosa_ioctl_common(chan->cosa, chan, cmd, (unsigned long)ifr->ifr_data);
-	if (rv == -ENOIOCTLCMD) {
-		return sppp_do_ioctl(dev, ifr, cmd);
-	}
-	return rv;
+	struct channel_data *chan = dev_to_chan(dev);
+	rv = cosa_ioctl_common(chan->cosa, chan, cmd,
+			       (unsigned long)ifr->ifr_data);
+	if (rv != -ENOIOCTLCMD)
+		return rv;
+	return hdlc_ioctl(dev, ifr, cmd);
 }
 
 static int cosa_chardev_ioctl(struct inode *inode, struct file *file,

drivers/net/wan/dscc4.c

···
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
 #include <linux/delay.h>
-#include <net/syncppp.h>
 #include <linux/hdlc.h>
 #include <linux/mutex.h>
 

drivers/net/wan/farsync.c

···
 /*      Default parameters for the link
  */
 #define FST_TX_QUEUE_LEN        100	/* At 8Mbps a longer queue length is
-					 * useful, the syncppp module forces
-					 * this down assuming a slower line I
-					 * guess.
-					 */
+					 * useful */
 #define FST_TXQ_DEPTH           16	/* This one is for the buffering
 					 * of frames on the way down to the card
 					 * so that we can keep the card busy

drivers/net/wan/farsync.h

···
 
 
 /*      Ioctl call command values
- *
- *      The first three private ioctls are used by the sync-PPP module,
- *      allowing a little room for expansion we start our numbering at 10.
  */
 #define FSTWRITE        (SIOCDEVPRIVATE+10)
 #define FSTCPURESET     (SIOCDEVPRIVATE+11)
···
 #define J1              7
 
 /* "proto" */
-#define FST_HDLC        1               /* Cisco compatible HDLC */
-#define FST_PPP         2               /* Sync PPP */
-#define FST_MONITOR     3               /* Monitor only (raw packet reception) */
 #define FST_RAW         4               /* Two way raw packets */
 #define FST_GEN_HDLC    5               /* Using "Generic HDLC" module */
 

drivers/net/wan/hdlc.c

···
  * - proto->start() and stop() are called with spin_lock_irq held.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
-#include <linux/rtnetlink.h>
-#include <linux/notifier.h>
 #include <linux/hdlc.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/pkt_sched.h>
+#include <linux/poll.h>
+#include <linux/rtnetlink.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <net/net_namespace.h>
 
 
···
 
 	if (dev->get_stats != hdlc_get_stats)
 		return NOTIFY_DONE; /* not an HDLC device */
- 
+
 	if (event != NETDEV_CHANGE)
 		return NOTIFY_DONE; /* Only interrested in carrier changes */
 
···
 
 
 static struct notifier_block hdlc_notifier = {
-        .notifier_call = hdlc_device_event,
+	.notifier_call = hdlc_device_event,
 };
 
 
···
 
 	printk(KERN_INFO "%s\n", version);
 	if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0)
-                return result;
-        dev_add_pack(&hdlc_packet_type);
+		return result;
+	dev_add_pack(&hdlc_packet_type);
 	return 0;
 }
 

drivers/net/wan/hdlc_cisco.c

···
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
-#include <linux/rtnetlink.h>
 #include <linux/hdlc.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pkt_sched.h>
+#include <linux/poll.h>
+#include <linux/rtnetlink.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 #undef DEBUG_HARD_HEADER
 
···
 static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr);
 
 
-static inline struct cisco_state * state(hdlc_device *hdlc)
+static inline struct cisco_state* state(hdlc_device *hdlc)
 {
-	return(struct cisco_state *)(hdlc->state);
+	return (struct cisco_state *)hdlc->state;
 }
 
 
···
 	    data->address != CISCO_UNICAST)
 		goto rx_error;
 
-	switch(ntohs(data->protocol)) {
+	switch (ntohs(data->protocol)) {
 	case CISCO_SYS_INFO:
 		/* Packet is not needed, drop it. */
 		dev_kfree_skb_any(skb);
···
 static const struct header_ops cisco_header_ops = {
 	.create = cisco_hard_header,
 };
- 
+
 static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 {
 	cisco_proto __user *cisco_s = ifr->ifr_settings.ifs_ifsu.cisco;
···
 		return 0;
 
 	case IF_PROTO_CISCO:
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if(dev->flags & IFF_UP)
+		if (dev->flags & IFF_UP)
 			return -EBUSY;
 
 		if (copy_from_user(&new_settings, cisco_s, size))
···
 		    new_settings.timeout < 2)
 			return -EINVAL;
 
-		result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
+		result = hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
 		if (result)
 			return result;
 

drivers/net/wan/hdlc_fr.c

···
 
 */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
-#include <linux/rtnetlink.h>
 #include <linux/etherdevice.h>
 #include <linux/hdlc.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pkt_sched.h>
+#include <linux/poll.h>
+#include <linux/rtnetlink.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 #undef DEBUG_PKT
 #undef DEBUG_ECN
···
 	unsigned ea1:	1;
 	unsigned cr:	1;
 	unsigned dlcih:	6;
-  
+
 	unsigned ea2:	1;
 	unsigned de:	1;
 	unsigned becn:	1;

drivers/net/wan/hdlc_ppp.c

···
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
-#include <linux/rtnetlink.h>
 #include <linux/hdlc.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pkt_sched.h>
+#include <linux/poll.h>
+#include <linux/rtnetlink.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <net/syncppp.h>
 
 struct ppp_state {

drivers/net/wan/hdlc_raw.c

···
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
-#include <linux/rtnetlink.h>
 #include <linux/hdlc.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pkt_sched.h>
+#include <linux/poll.h>
+#include <linux/rtnetlink.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 
 static int raw_ioctl(struct net_device *dev, struct ifreq *ifr);

drivers/net/wan/hdlc_raw_eth.c

···
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
-#include <linux/rtnetlink.h>
 #include <linux/etherdevice.h>
 #include <linux/hdlc.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pkt_sched.h>
+#include <linux/poll.h>
+#include <linux/rtnetlink.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 
 static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr);
 

drivers/net/wan/hdlc_x25.c

···
  * as published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
 #include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/pkt_sched.h>
-#include <linux/inetdevice.h>
-#include <linux/lapb.h>
-#include <linux/rtnetlink.h>
 #include <linux/hdlc.h>
-
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/lapb.h>
+#include <linux/module.h>
+#include <linux/pkt_sched.h>
+#include <linux/poll.h>
+#include <linux/rtnetlink.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <net/x25device.h>
 
 static int x25_ioctl(struct net_device *dev, struct ifreq *ifr);

drivers/net/wan/hostess_sv11.c

···
  *	touching control registers.
  *
  *	Port B isnt wired (why - beats me)
+ *
+ *	Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <[e-mail]>
  */
 
 #include <linux/module.h>
···
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/ioport.h>
 #include <net/arp.h>
 
···
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
-#include <net/syncppp.h>
 #include "z85230.h"
 
 static int dma;
-
-struct sv11_device
-{
-	void *if_ptr;	/* General purpose pointer (used by SPPP) */
-	struct z8530_dev sync;
-	struct ppp_device netdev;
-};
 
 /*
  *	Network driver support routines
  */
 
+static inline struct z8530_dev* dev_to_sv(struct net_device *dev)
+{
+	return (struct z8530_dev *)dev_to_hdlc(dev)->priv;
+}
+
 /*
- *	Frame receive. Simple for our card as we do sync ppp and there
+ *	Frame receive. Simple for our card as we do HDLC and there
  *	is no funny garbage involved
  */
- 
+
 static void hostess_input(struct z8530_channel *c, struct sk_buff *skb)
 {
 	/* Drop the CRC - it's not a good idea to try and negotiate it ;) */
-	skb_trim(skb, skb->len-2);
-	skb->protocol=__constant_htons(ETH_P_WAN_PPP);
+	skb_trim(skb, skb->len - 2);
+	skb->protocol = hdlc_type_trans(skb, c->netdevice);
 	skb_reset_mac_header(skb);
-	skb->dev=c->netdevice;
+	skb->dev = c->netdevice;
 	/*
 	 *	Send it to the PPP layer. We don't have time to process
 	 *	it right now.
···
 	netif_rx(skb);
 	c->netdevice->last_rx = jiffies;
 }
- 
+
 /*
  *	We've been placed in the UP state
- */ 
- 
+ */
+
 static int hostess_open(struct net_device *d)
 {
-	struct sv11_device *sv11=d->ml_priv;
+	struct z8530_dev *sv11 = dev_to_sv(d);
 	int err = -1;
-	
+
 	/*
 	 *	Link layer up
 	 */
-	switch(dma)
-	{
+	switch (dma) {
 		case 0:
-			err=z8530_sync_open(d, &sv11->sync.chanA);
+			err = z8530_sync_open(d, &sv11->chanA);
 			break;
 		case 1:
-			err=z8530_sync_dma_open(d, &sv11->sync.chanA);
+			err = z8530_sync_dma_open(d, &sv11->chanA);
 			break;
 		case 2:
-			err=z8530_sync_txdma_open(d, &sv11->sync.chanA);
+			err = z8530_sync_txdma_open(d, &sv11->chanA);
 			break;
 	}
-	
-	if(err)
+
+	if (err)
 		return err;
-	/*
-	 *	Begin PPP
-	 */
-	err=sppp_open(d);
-	if(err)
-	{
-		switch(dma)
-		{
+
+	err = hdlc_open(d);
+	if (err) {
+		switch (dma) {
 			case 0:
-				z8530_sync_close(d, &sv11->sync.chanA);
+				z8530_sync_close(d, &sv11->chanA);
 				break;
 			case 1:
-				z8530_sync_dma_close(d, &sv11->sync.chanA);
+				z8530_sync_dma_close(d, &sv11->chanA);
 				break;
 			case 2:
-				z8530_sync_txdma_close(d, &sv11->sync.chanA);
+				z8530_sync_txdma_close(d, &sv11->chanA);
 				break;
-		}				
+		}
 		return err;
 	}
-	sv11->sync.chanA.rx_function=hostess_input;
-	
+	sv11->chanA.rx_function = hostess_input;
+
 	/*
 	 *	Go go go
 	 */
···
 
 static int hostess_close(struct net_device *d)
 {
-	struct sv11_device *sv11=d->ml_priv;
+	struct z8530_dev *sv11 = dev_to_sv(d);
 	/*
 	 *	Discard new frames
 	 */
-	sv11->sync.chanA.rx_function=z8530_null_rx;
-	/*
-	 *	PPP off
-	 */
-	sppp_close(d);
-	/*
-	 *	Link layer down
-	 */
+	sv11->chanA.rx_function = z8530_null_rx;
+
+	hdlc_close(d);
 	netif_stop_queue(d);
-		
-	switch(dma)
-	{
+
+	switch (dma) {
 		case 0:
-			z8530_sync_close(d, &sv11->sync.chanA);
+			z8530_sync_close(d, &sv11->chanA);
 			break;
 		case 1:
-			z8530_sync_dma_close(d, &sv11->sync.chanA);
+			z8530_sync_dma_close(d, &sv11->chanA);
 			break;
 		case 2:
-			z8530_sync_txdma_close(d, &sv11->sync.chanA);
+			z8530_sync_txdma_close(d, &sv11->chanA);
 			break;
 	}
 	return 0;
···
 
 static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 {
-	/* struct sv11_device *sv11=d->ml_priv;
-	   z8530_ioctl(d,&sv11->sync.chanA,ifr,cmd) */
-	return sppp_do_ioctl(d, ifr,cmd);
-}
-
-static struct net_device_stats *hostess_get_stats(struct net_device *d)
-{
-	struct sv11_device *sv11=d->ml_priv;
-	if(sv11)
-		return z8530_get_stats(&sv11->sync.chanA);
-	else
-		return NULL;
+	/* struct z8530_dev *sv11=dev_to_sv(d);
+	   z8530_ioctl(d,&sv11->chanA,ifr,cmd) */
+	return hdlc_ioctl(d, ifr, cmd);
 }
 
 /*
- *	Passed PPP frames, fire them downwind.
+ *	Passed network frames, fire them downwind.
  */
- 
+
 static int hostess_queue_xmit(struct sk_buff *skb, struct net_device *d)
 {
-	struct sv11_device *sv11=d->ml_priv;
-	return z8530_queue_xmit(&sv11->sync.chanA, skb);
+	return z8530_queue_xmit(&dev_to_sv(d)->chanA, skb);
 }
 
-static int hostess_neigh_setup(struct neighbour *n)
+static int hostess_attach(struct net_device *dev, unsigned short encoding,
+			  unsigned short parity)
 {
-	if (n->nud_state == NUD_NONE) {
-		n->ops = &arp_broken_ops;
-		n->output = n->ops->output;
-	}
-	return 0;
-}
-
-static int hostess_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
-{
-	if (p->tbl->family == AF_INET) {
-		p->neigh_setup = hostess_neigh_setup;
-		p->ucast_probes = 0;
-		p->mcast_probes = 0;
-	}
-	return 0;
-}
-
-static void sv11_setup(struct net_device *dev)
-{	
-	dev->open = hostess_open;
-	dev->stop = hostess_close;
-	dev->hard_start_xmit = hostess_queue_xmit;
-	dev->get_stats = hostess_get_stats;
-	dev->do_ioctl = hostess_ioctl;
-	dev->neigh_setup = hostess_neigh_setup_dev;
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
 
 /*
  *	Description block for a Comtrol Hostess SV11 card
  */
- 
-static struct sv11_device *sv11_init(int iobase, int irq)
+
+static struct z8530_dev *sv11_init(int iobase, int irq)
 {
-	struct z8530_dev *dev;
-	struct sv11_device *sv;
-	
+	struct z8530_dev *sv;
+	struct net_device *netdev;
 	/*
 	 *	Get the needed I/O space
 	 */
-	 
-	if(!request_region(iobase, 8, "Comtrol SV11"))
-	{	
-		printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", iobase);
+
+	if (!request_region(iobase, 8, "Comtrol SV11")) {
+		printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n",
+		       iobase);
 		return NULL;
 	}
-	
-	sv = kzalloc(sizeof(struct sv11_device), GFP_KERNEL);
-	if(!sv)
-		goto fail3;
-			
-	sv->if_ptr=&sv->netdev;
-	
-	sv->netdev.dev = alloc_netdev(0, "hdlc%d", sv11_setup);
-	if(!sv->netdev.dev)
-		goto fail2;
 
-	dev=&sv->sync;
-	
+	sv = kzalloc(sizeof(struct z8530_dev), GFP_KERNEL);
+	if (!sv)
+		goto err_kzalloc;
+
 	/*
 	 *	Stuff in the I/O addressing
 	 */
-	 
-	dev->active = 0;
-	
-	dev->chanA.ctrlio=iobase+1;
-	dev->chanA.dataio=iobase+3;
-	dev->chanB.ctrlio=-1;
-	dev->chanB.dataio=-1;
-	dev->chanA.irqs=&z8530_nop;
-	dev->chanB.irqs=&z8530_nop;
-	
-	outb(0, iobase+4);		/* DMA off */
-	
+
+	sv->active = 0;
+
+	sv->chanA.ctrlio = iobase + 1;
+	sv->chanA.dataio = iobase + 3;
+	sv->chanB.ctrlio = -1;
+	sv->chanB.dataio = -1;
+	sv->chanA.irqs = &z8530_nop;
+	sv->chanB.irqs = &z8530_nop;
+
+	outb(0, iobase + 4);		/* DMA off */
+
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
 	   IRQ ;) - This is one driver RtLinux is made for */
-	   
-	if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "Hostess SV11", dev)<0)
-	{
+
+	if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED,
+			"Hostess SV11", sv) < 0) {
 		printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq);
-		goto fail1;
+		goto err_irq;
 	}
-	
-	dev->irq=irq;
-	dev->chanA.private=sv;
-	dev->chanA.netdevice=sv->netdev.dev;
-	dev->chanA.dev=dev;
-	dev->chanB.dev=dev;
-	
-	if(dma)
-	{
+
+	sv->irq = irq;
+	sv->chanA.private = sv;
+	sv->chanA.dev = sv;
+	sv->chanB.dev = sv;
+
+	if (dma) {
 		/*
 		 *	You can have DMA off or 1 and 3 thats the lot
 		 *	on the Comtrol.
 		 */
-		dev->chanA.txdma=3;
-		dev->chanA.rxdma=1;
-		outb(0x03|0x08, iobase+4);		/* DMA on */
-		if(request_dma(dev->chanA.txdma, "Hostess SV/11 (TX)")!=0)
-			goto fail;
-			
-		if(dma==1)
-		{
-			if(request_dma(dev->chanA.rxdma, "Hostess SV/11 (RX)")!=0)
-				goto dmafail;
-		}
+		sv->chanA.txdma = 3;
+		sv->chanA.rxdma = 1;
+		outb(0x03 | 0x08, iobase + 4);		/* DMA on */
+		if (request_dma(sv->chanA.txdma, "Hostess SV/11 (TX)"))
+			goto err_txdma;
+
+		if (dma == 1)
+			if (request_dma(sv->chanA.rxdma, "Hostess SV/11 (RX)"))
+				goto err_rxdma;
 	}
 
 	/* Kill our private IRQ line the hostess can end up chattering
 	   until the configuration is set */
 	disable_irq(irq);
-		
+
 	/*
 	 *	Begin normal initialise
 	 */
-	 
-	if(z8530_init(dev)!=0)
-	{
+
+	if (z8530_init(sv)) {
 		printk(KERN_ERR "Z8530 series device not found.\n");
 		enable_irq(irq);
-		goto dmafail2;
+		goto free_dma;
 	}
-	z8530_channel_load(&dev->chanB, z8530_dead_port);
-	if(dev->type==Z85C30)
-		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream);
+	z8530_channel_load(&sv->chanB, z8530_dead_port);
+	if (sv->type == Z85C30)
+		z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream);
 	else
-		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230);
-	
+		z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream_85230);
+
 	enable_irq(irq);
-	
 
 	/*
 	 *	Now we can take the IRQ
 	 */
-	if(dev_alloc_name(dev->chanA.netdevice,"hdlc%d")>=0)
-	{
-		struct net_device *d=dev->chanA.netdevice;
 
-		/* 
-		 *	Initialise the PPP components
-		 */
-		d->ml_priv = sv;
-		sppp_attach(&sv->netdev);
-		
-		/*
-		 *	Local fields
-		 */	
-		
-		d->base_addr = iobase;
-		d->irq = irq;
-		
-		if(register_netdev(d))
-		{
-			printk(KERN_ERR "%s: unable to register device.\n",
-				d->name);
-			sppp_detach(d);
-			goto dmafail2;
-		}
+	sv->chanA.netdevice = netdev = alloc_hdlcdev(sv);
+	if (!netdev)
+		goto free_dma;
 
-		z8530_describe(dev, "I/O", iobase);
-		dev->active=1;
-		return sv;	
+	dev_to_hdlc(netdev)->attach = hostess_attach;
+	dev_to_hdlc(netdev)->xmit = hostess_queue_xmit;
+	netdev->open = hostess_open;
+	netdev->stop = hostess_close;
+	netdev->do_ioctl = hostess_ioctl;
+	netdev->base_addr = iobase;
+	netdev->irq = irq;
+
+	if (register_hdlc_device(netdev)) {
+		printk(KERN_ERR "hostess: unable to register HDLC device.\n");
+		free_netdev(netdev);
+		goto free_dma;
 	}
-dmafail2:
-	if(dma==1)
-		free_dma(dev->chanA.rxdma);
-dmafail:
-	if(dma)
-		free_dma(dev->chanA.txdma);
-fail:
-	free_irq(irq, dev);
-fail1:
-	free_netdev(sv->netdev.dev);
-fail2:
+
+	z8530_describe(sv, "I/O", iobase);
+	sv->active = 1;
+	return sv;
+
+free_dma:
+	if (dma == 1)
+		free_dma(sv->chanA.rxdma);
+err_rxdma:
+	if (dma)
+		free_dma(sv->chanA.txdma);
+err_txdma:
+	free_irq(irq, sv);
+err_irq:
 	kfree(sv);
-fail3:
-	release_region(iobase,8);
+err_kzalloc:
+	release_region(iobase, 8);
 	return NULL;
 }
 
-static void sv11_shutdown(struct sv11_device *dev)
+static void sv11_shutdown(struct z8530_dev *dev)
 {
-	sppp_detach(dev->netdev.dev);
-	unregister_netdev(dev->netdev.dev);
-	z8530_shutdown(&dev->sync);
-	free_irq(dev->sync.irq, dev);
-	if(dma)
-	{
-		if(dma==1)
-			free_dma(dev->sync.chanA.rxdma);
-		free_dma(dev->sync.chanA.txdma);
+	unregister_hdlc_device(dev->chanA.netdevice);
+	z8530_shutdown(dev);
+	free_irq(dev->irq, dev);
+	if (dma) {
+		if (dma == 1)
+			free_dma(dev->chanA.rxdma);
+		free_dma(dev->chanA.txdma);
 	}
-	release_region(dev->sync.chanA.ctrlio-1, 8);
-	free_netdev(dev->netdev.dev);
+	release_region(dev->chanA.ctrlio - 1, 8);
+	free_netdev(dev->chanA.netdevice);
 	kfree(dev);
 }
 
-#ifdef MODULE
-
-static int io=0x200;
-static int irq=9;
+static int io = 0x200;
+static int irq = 9;
 
 module_param(io, int, 0);
 MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card");
···
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Modular driver for the Comtrol Hostess SV11");
 
-static struct sv11_device *sv11_unit;
+static struct z8530_dev *sv11_unit;
 
 int init_module(void)
 {
-	printk(KERN_INFO "SV-11 Z85230 Synchronous Driver v 0.03.\n");
-	printk(KERN_INFO "(c) Copyright 2001, Red Hat Inc.\n");	
-	if((sv11_unit=sv11_init(io,irq))==NULL)
+	if ((sv11_unit = sv11_init(io, irq)) == NULL)
 		return -ENODEV;
 	return 0;
 }
 
 void cleanup_module(void)
 {
-	if(sv11_unit)
+	if (sv11_unit)
 		sv11_shutdown(sv11_unit);
 }
-
-#endif
-

drivers/net/wan/lmc/lmc.h

···
       			  devaddr, unsigned regno);
 void lmc_mii_writereg(lmc_softc_t * const sc, unsigned devaddr,
 			       unsigned regno, unsigned data);
-void lmc_led_on(lmc_softc_t * const, u_int32_t);
-void lmc_led_off(lmc_softc_t * const, u_int32_t);
+void lmc_led_on(lmc_softc_t * const, u32);
+void lmc_led_off(lmc_softc_t * const, u32);
 unsigned lmc_mii_readreg(lmc_softc_t * const, unsigned, unsigned);
 void lmc_mii_writereg(lmc_softc_t * const, unsigned, unsigned, unsigned);
-void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits);
-void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits);
+void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits);
+void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits);
 
 int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 
···
 extern lmc_media_t lmc_hssi_media;
 
 #ifdef _DBG_EVENTLOG
-static void lmcEventLog( u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3 );
+static void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3);
 #endif
 
 #endif
-

drivers/net/wan/lmc/lmc_debug.c

···
-
 #include <linux/types.h>
 #include <linux/netdevice.h>
 #include <linux/interrupt.h>
···
 #endif
 
 #ifdef DEBUG
-u_int32_t lmcEventLogIndex = 0;
-u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
+u32 lmcEventLogIndex;
+u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
 
-void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3)
+void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3)
 {
   lmcEventLogBuf[lmcEventLogIndex++] = EventNum;
   lmcEventLogBuf[lmcEventLogIndex++] = arg2;

drivers/net/wan/lmc/lmc_debug.h

···
 
 
 #ifdef DEBUG
-extern u_int32_t lmcEventLogIndex;
-extern u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
+extern u32 lmcEventLogIndex;
+extern u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
 #define LMC_EVENT_LOG(x, y, z) lmcEventLog((x), (y), (z))
 #else
 #define LMC_EVENT_LOG(x,y,z)
 #endif /* end ifdef _DBG_EVENTLOG */
 
 void lmcConsoleLog(char *type, unsigned char *ucData, int iLen);
-void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3);
+void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3);
 void lmc_trace(struct net_device *dev, char *msg);
 
 #endif

drivers/net/wan/lmc/lmc_ioctl.h

···
 /*
  * IFTYPE defines
  */
-#define LMC_PPP         1               /* use sppp interface */
+#define LMC_PPP         1               /* use generic HDLC interface */
 #define LMC_NET         2               /* use direct net interface */
 #define LMC_RAW         3               /* use direct net interface */
 

drivers/net/wan/lmc/lmc_main.c

···
  /*
   * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
   * All rights reserved.  www.lanmedia.com
+  * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <[e-mail]>
   *
   * This code is written by:
   * Andrew Stanley-Jones ([e-mail])
···
   *
   */
 
-/* $Id: lmc_main.c,v 1.36 2000/04/11 05:25:25 asj Exp $ */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/string.h>
···
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/init.h>
 #include <linux/in.h>
 #include <linux/if_arp.h>
···
 #include <linux/skbuff.h>
 #include <linux/inet.h>
 #include <linux/bitops.h>
-
-#include <net/syncppp.h>
-
 #include <asm/processor.h>             /* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/dma.h>
···
 #include "lmc_debug.h"
 #include "lmc_proto.h"
 
-static int lmc_first_load = 0;
-
 static int LMC_PKT_BUF_SZ = 1542;
 
 static struct pci_device_id lmc_pci_tbl[] = {
···
 };
 
 MODULE_DEVICE_TABLE(pci, lmc_pci_tbl);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 
 
-static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static int lmc_rx (struct net_device *dev);
 static int lmc_open(struct net_device *dev);
···
  * linux reserves 16 device specific IOCTLs.  We call them
  * LMCIOC* to control various bits of our world.
  */
-int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
+int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
 {
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     lmc_ctl_t ctl;
-    int ret;
-    u_int16_t regVal;
+    int ret = -EOPNOTSUPP;
+    u16 regVal;
     unsigned long flags;
-
-    struct sppp *sp;
-
-    ret = -EOPNOTSUPP;
-
-    sc = dev->priv;
 
     lmc_trace(dev, "lmc_ioctl in");
 
···
         break;
 
     case LMCIOCSINFO: /*fold01*/
-        sp = &((struct ppp_device *) dev)->sppp;
         if (!capable(CAP_NET_ADMIN)) {
             ret = -EPERM;
             break;
···
 		sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE;
         }
 
-        if (ctl.keepalive_onoff == LMC_CTL_OFF)
-            sp->pp_flags &= ~PP_KEEPALIVE;	/* Turn off */
-        else
-            sp->pp_flags |= PP_KEEPALIVE;	/* Turn on */
-
         ret = 0;
         break;
 
     case LMCIOCIFTYPE: /*fold01*/
         {
-            u_int16_t	old_type = sc->if_type;
-            u_int16_t	new_type;
+	    u16 old_type = sc->if_type;
+	    u16	new_type;
 
 	    if (!capable(CAP_NET_ADMIN)) {
 		ret = -EPERM;
 		break;
 	    }
 
-	    if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) {
+	    if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u16))) {
 		ret = -EFAULT;
 		break;
 	    }
···
             }
             
             lmc_proto_close(sc);
-            lmc_proto_detach(sc);
 
             sc->if_type = new_type;
-//            lmc_proto_init(sc);
             lmc_proto_attach(sc);
-            lmc_proto_open(sc);
-
-	    ret = 0 ;
-	    break ;
+	    ret = lmc_proto_open(sc);
+	    break;
 	}
 
     case LMCIOCGETXINFO: /*fold01*/
···
 
         break;
 
-    case LMCIOCGETLMCSTATS: /*fold01*/
-        if (sc->lmc_cardtype == LMC_CARDTYPE_T1){
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_LSB);
-            sc->stats.framingBitErrorCount +=
-                lmc_mii_readreg (sc, 0, 18) & 0xff;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_MSB);
-            sc->stats.framingBitErrorCount +=
-                (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_LSB);
-            sc->stats.lineCodeViolationCount +=
-                lmc_mii_readreg (sc, 0, 18) & 0xff;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_MSB);
-            sc->stats.lineCodeViolationCount +=
-                (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8;
-            lmc_mii_writereg (sc, 0, 17, T1FRAMER_AERR);
-            regVal = lmc_mii_readreg (sc, 0, 18) & 0xff;
+    case LMCIOCGETLMCSTATS:
+	    if (sc->lmc_cardtype == LMC_CARDTYPE_T1) {
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_LSB);
+		    sc->extra_stats.framingBitErrorCount +=
+			    lmc_mii_readreg(sc, 0, 18) & 0xff;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_MSB);
+		    sc->extra_stats.framingBitErrorCount +=
+			    (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_LSB);
+		    sc->extra_stats.lineCodeViolationCount +=
+			    lmc_mii_readreg(sc, 0, 18) & 0xff;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_MSB);
+		    sc->extra_stats.lineCodeViolationCount +=
+			    (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
+		    lmc_mii_writereg(sc, 0, 17, T1FRAMER_AERR);
+		    regVal = lmc_mii_readreg(sc, 0, 18) & 0xff;
 
-            sc->stats.lossOfFrameCount +=
-                (regVal & T1FRAMER_LOF_MASK) >> 4;
-            sc->stats.changeOfFrameAlignmentCount +=
-                (regVal & T1FRAMER_COFA_MASK) >> 2;
-            sc->stats.severelyErroredFrameCount +=
-                regVal & T1FRAMER_SEF_MASK;
-        }
+		    sc->extra_stats.lossOfFrameCount +=
+			    (regVal & T1FRAMER_LOF_MASK) >> 4;
+		    sc->extra_stats.changeOfFrameAlignmentCount +=
+			    (regVal & T1FRAMER_COFA_MASK) >> 2;
+		    sc->extra_stats.severelyErroredFrameCount +=
+			    regVal & T1FRAMER_SEF_MASK;
+	    }
+	    if (copy_to_user(ifr->ifr_data, &sc->lmc_device->stats,
+			     sizeof(sc->lmc_device->stats)) ||
+		copy_to_user(ifr->ifr_data + sizeof(sc->lmc_device->stats),
+			     &sc->extra_stats, sizeof(sc->extra_stats)))
+		    ret = -EFAULT;
+	    else
+		    ret = 0;
+	    break;
 
-        if (copy_to_user(ifr->ifr_data, &sc->stats,
-                         sizeof (struct lmc_statistics)))
-		ret = -EFAULT;
-	else
-		ret = 0;
-        break;
+    case LMCIOCCLEARLMCSTATS:
+	    if (!capable(CAP_NET_ADMIN)) {
+		    ret = -EPERM;
+		    break;
+	    }
 
-    case LMCIOCCLEARLMCSTATS: /*fold01*/
-        if (!capable(CAP_NET_ADMIN)){
-            ret = -EPERM;
-            break;
-        }
-
-        memset (&sc->stats, 0, sizeof (struct lmc_statistics));
-        sc->stats.check = STATCHECK;
-        sc->stats.version_size = (DRIVER_VERSION << 16) +
-            sizeof (struct lmc_statistics);
-        sc->stats.lmc_cardtype = sc->lmc_cardtype;
-        ret = 0;
-        break;
+	    memset(&sc->lmc_device->stats, 0, sizeof(sc->lmc_device->stats));
+	    memset(&sc->extra_stats, 0, sizeof(sc->extra_stats));
+	    sc->extra_stats.check = STATCHECK;
+	    sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
+		    sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
+	    sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
+	    ret = 0;
+	    break;
 
     case LMCIOCSETCIRCUIT: /*fold01*/
         if (!capable(CAP_NET_ADMIN)){
···
 		ret = -EFAULT;
 		break;
 	}
-        if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf)))
+	if (copy_to_user(ifr->ifr_data + sizeof(u32), lmcEventLogBuf,
+			 sizeof(lmcEventLogBuf)))
 		ret = -EFAULT;
 	else
 		ret = 0;
···
 /* the watchdog process that cruises around */
 static void lmc_watchdog (unsigned long data) /*fold00*/
 {
-    struct net_device *dev = (struct net_device *) data;
-    lmc_softc_t *sc;
+    struct net_device *dev = (struct net_device *)data;
+    lmc_softc_t *sc = dev_to_sc(dev);
     int link_status;
-    u_int32_t ticks;
+    u32 ticks;
     unsigned long flags;
-
-    sc = dev->priv;
 
     lmc_trace(dev, "lmc_watchdog in");
 
···
      * check for a transmit interrupt timeout
      * Has the packet xmt vs xmt serviced threshold been exceeded */
     if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
-        sc->stats.tx_packets > sc->lasttx_packets &&
-        sc->tx_TimeoutInd == 0)
+	sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
+	sc->tx_TimeoutInd == 0)
     {
 
         /* wait for the watchdog to come around again */
         sc->tx_TimeoutInd = 1;
     }
     else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
-             sc->stats.tx_packets > sc->lasttx_packets &&
-             sc->tx_TimeoutInd)
+	     sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
+	     sc->tx_TimeoutInd)
     {
 
         LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0);
 
         sc->tx_TimeoutDisplay = 1;
-        sc->stats.tx_TimeoutCnt++;
+	sc->extra_stats.tx_TimeoutCnt++;
 
         /* DEC chip is stuck, hit it with a RESET!!!! */
         lmc_running_reset (dev);
···
         /* reset the transmit timeout detection flag */
         sc->tx_TimeoutInd = 0;
         sc->lastlmc_taint_tx = sc->lmc_taint_tx;
-        sc->lasttx_packets = sc->stats.tx_packets;
-    }
-    else
-    {
+	sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
+    } else {
         sc->tx_TimeoutInd = 0;
         sc->lastlmc_taint_tx = sc->lmc_taint_tx;
-        sc->lasttx_packets = sc->stats.tx_packets;
+	sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
     }
 
     /* --- end time out check ----------------------------------- */
···
          sc->last_link_status = 1;
          /* lmc_reset (sc); Again why reset??? */
 
-         /* Inform the world that link protocol is back up. */
 	 netif_carrier_on(dev);
-
-         /* Now we have to tell the syncppp that we had an outage
-          * and that it should deal.  Calling sppp_reopen here
-          * should do the trick, but we may have to call sppp_close
-          * when the link goes down, and call sppp_open here.
-          * Subject to more testing.
-          * --bbraun
-          */
-
-         lmc_proto_reopen(sc);
-
      }
 
     /* Call media specific watchdog functions */
···
 
 }
 
-static void lmc_setup(struct net_device * const dev) /*fold00*/
+static int lmc_attach(struct net_device *dev, unsigned short encoding,
+		      unsigned short parity)
 {
-    lmc_trace(dev, "lmc_setup in");
-
-    dev->type = ARPHRD_HDLC;
-    dev->hard_start_xmit = lmc_start_xmit;
-    dev->open = lmc_open;
-    dev->stop = lmc_close;
-    dev->get_stats = lmc_get_stats;
-    dev->do_ioctl = lmc_ioctl;
-    dev->tx_timeout = lmc_driver_timeout;
-    dev->watchdog_timeo = (HZ); /* 1 second */
-    
-    lmc_trace(dev, "lmc_setup out");
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
 }
-
 
 static int __devinit lmc_init_one(struct pci_dev *pdev,
 				  const struct pci_device_id *ent)
 {
-    struct net_device *dev;
-    lmc_softc_t *sc;
-    u16 subdevice;
-    u_int16_t AdapModelNum;
-    int err = -ENOMEM;
-    static int cards_found;
-#ifndef GCOM
-    /* We name by type not by vendor */
-    static const char lmcname[] = "hdlc%d";
-#else
-    /* 
-     * GCOM uses LMC vendor name so that clients can know which card
-     * to attach to.
-     */
-    static const char lmcname[] = "lmc%d";
-#endif
+	lmc_softc_t *sc;
+	struct net_device *dev;
+	u16 subdevice;
+	u16 AdapModelNum;
+	int err;
+	static int cards_found;
+
+	/* lmc_trace(dev, "lmc_init_one in"); */
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR "lmc: pci enable failed: %d\n", err);
+		return err;
+	}
+
+	err = pci_request_regions(pdev, "lmc");
+	if (err) {
+		printk(KERN_ERR "lmc: pci_request_region failed\n");
+		goto err_req_io;
+	}
+
+	/*
+	 * Allocate our own device structure
+	 */
+	sc = kzalloc(sizeof(lmc_softc_t), GFP_KERNEL);
+	if (!sc) {
+		err = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	dev = alloc_hdlcdev(sc);
+	if (!dev) {
+		printk(KERN_ERR "lmc:alloc_netdev for device failed\n");
+		goto err_hdlcdev;
+	}
 
 
-    /*
-     * Allocate our own device structure
-     */
-    dev = alloc_netdev(sizeof(lmc_softc_t), lmcname, lmc_setup);
-    if (!dev) {
-        printk (KERN_ERR "lmc:alloc_netdev for device failed\n");
-	goto out1;
-    }
- 
-    lmc_trace(dev, "lmc_init_one in");
+	dev->type = ARPHRD_HDLC;
+	dev_to_hdlc(dev)->xmit = lmc_start_xmit;
+	dev_to_hdlc(dev)->attach = lmc_attach;
+	dev->open = lmc_open;
+	dev->stop = lmc_close;
+	dev->get_stats = lmc_get_stats;
+	dev->do_ioctl = lmc_ioctl;
+	dev->tx_timeout = lmc_driver_timeout;
+	dev->watchdog_timeo = HZ; /* 1 second */
+	dev->tx_queue_len = 100;
+	sc->lmc_device = dev;
+	sc->name = dev->name;
+	sc->if_type = LMC_PPP;
+	sc->check = 0xBEAFCAFE;
+	dev->base_addr = pci_resource_start(pdev, 0);
+	dev->irq = pdev->irq;
+	pci_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
 
-    err = pci_enable_device(pdev);
-    if (err) {
-	    printk(KERN_ERR "lmc: pci enable failed:%d\n", err);
-	    goto out2;
-    }
-    
-    if (pci_request_regions(pdev, "lmc")) {
-	    printk(KERN_ERR "lmc: pci_request_region failed\n");
-	    err = -EIO;
-	    goto out3;
-    }
+	/*
+	 * This will get the protocol layer ready and do any 1 time init's
+	 * Must have a valid sc and dev structure
+	 */
+	lmc_proto_attach(sc);
 
-    pci_set_drvdata(pdev, dev);
+	/* Init the spin lock so can call it latter */
 
-    if(lmc_first_load == 0){
-        printk(KERN_INFO "Lan Media Corporation WAN Driver Version %d.%d.%d\n",
-	       DRIVER_MAJOR_VERSION, DRIVER_MINOR_VERSION,DRIVER_SUB_VERSION);
-        lmc_first_load = 1;
-    }
-    
-    sc = dev->priv;
-    sc->lmc_device = dev;
-    sc->name = dev->name;
+	spin_lock_init(&sc->lmc_lock);
+	pci_set_master(pdev);
 
-    /* Initialize the sppp layer */
-    /* An ioctl can cause a subsequent detach for raw frame interface */
-    dev->ml_priv = sc;
-    sc->if_type = LMC_PPP;
-    sc->check = 0xBEAFCAFE;
-    dev->base_addr = pci_resource_start(pdev, 0);
-    dev->irq = pdev->irq;
+	printk(KERN_INFO "%s: detected at %lx, irq %d\n", dev->name,
+	       dev->base_addr, dev->irq);
 
-    SET_NETDEV_DEV(dev, &pdev->dev);
-
-    /*
-     * This will get the protocol layer ready and do any 1 time init's
-     * Must have a valid sc and dev structure
-     */
-    lmc_proto_init(sc);
-
-    lmc_proto_attach(sc);
-
-    /*
-     * Why were we changing this???
-     dev->tx_queue_len = 100;
-     */
-
-    /* Init the spin lock so can call it latter */
-
-    spin_lock_init(&sc->lmc_lock);
-    pci_set_master(pdev);
-
-    printk ("%s: detected at %lx, irq %d\n", dev->name,
-	    dev->base_addr, dev->irq);
-
-    if (register_netdev (dev) != 0) {
-        printk (KERN_ERR "%s: register_netdev failed.\n", dev->name);
-	goto out4;
-    }
+	err = register_hdlc_device(dev);
+	if (err) {
+		printk(KERN_ERR "%s: register_netdev failed.\n", dev->name);
+		free_netdev(dev);
+		goto err_hdlcdev;
+	}
 
     sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN;
     sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
···
 
     switch (subdevice) {
     case PCI_DEVICE_ID_LMC_HSSI:
-        printk ("%s: LMC HSSI\n", dev->name);
+	printk(KERN_INFO "%s: LMC HSSI\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_HSSI;
         sc->lmc_media = &lmc_hssi_media;
         break;
     case PCI_DEVICE_ID_LMC_DS3:
-        printk ("%s: LMC DS3\n", dev->name);
+	printk(KERN_INFO "%s: LMC DS3\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_DS3;
         sc->lmc_media = &lmc_ds3_media;
         break;
     case PCI_DEVICE_ID_LMC_SSI:
-        printk ("%s: LMC SSI\n", dev->name);
+	printk(KERN_INFO "%s: LMC SSI\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_SSI;
         sc->lmc_media = &lmc_ssi_media;
         break;
     case PCI_DEVICE_ID_LMC_T1:
-        printk ("%s: LMC T1\n", dev->name);
+	printk(KERN_INFO "%s: LMC T1\n", dev->name);
         sc->lmc_cardtype = LMC_CARDTYPE_T1;
         sc->lmc_media = &lmc_t1_media;
         break;
     default:
-        printk (KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
+	printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
         break;
     }
 
···
      */
     AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4;
 
-    if ((AdapModelNum == LMC_ADAP_T1
-         && subdevice == PCI_DEVICE_ID_LMC_T1) ||	/* detect LMC1200 */
-        (AdapModelNum == LMC_ADAP_SSI
-         && subdevice == PCI_DEVICE_ID_LMC_SSI) ||	/* detect LMC1000 */
-        (AdapModelNum == LMC_ADAP_DS3
-         && subdevice == PCI_DEVICE_ID_LMC_DS3) ||	/* detect LMC5245 */
-        (AdapModelNum == LMC_ADAP_HSSI
-         && subdevice == PCI_DEVICE_ID_LMC_HSSI))
-    {				/* detect LMC5200 */
+    if ((AdapModelNum != LMC_ADAP_T1 || /* detect LMC1200 */
+	 subdevice != PCI_DEVICE_ID_LMC_T1) &&
+	(AdapModelNum != LMC_ADAP_SSI || /* detect LMC1000 */
+	 subdevice != PCI_DEVICE_ID_LMC_SSI) &&
+	(AdapModelNum != LMC_ADAP_DS3 || /* detect LMC5245 */
+	 subdevice != PCI_DEVICE_ID_LMC_DS3) &&
+	(AdapModelNum != LMC_ADAP_HSSI || /* detect LMC5200 */
+	 subdevice != PCI_DEVICE_ID_LMC_HSSI))
+	    printk(KERN_WARNING "%s: Model number (%d) miscompare for PCI"
+		   " Subsystem ID = 0x%04x\n",
+		   dev->name, AdapModelNum, subdevice);
 
-    }
-    else {
-        printk ("%s: Model number (%d) miscompare for PCI Subsystem ID = 0x%04x\n",
-                dev->name, AdapModelNum, subdevice);
-//        return (NULL);
-    }
     /*
      * reset clock
      */
     LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL);
 
     sc->board_idx = cards_found++;
-    sc->stats.check = STATCHECK;
-    sc->stats.version_size = (DRIVER_VERSION << 16) +
-        sizeof (struct lmc_statistics);
-    sc->stats.lmc_cardtype = sc->lmc_cardtype;
+    sc->extra_stats.check = STATCHECK;
+    sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
+	    sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
+    sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
 
     sc->lmc_ok = 0;
     sc->last_link_status = 0;
···
     lmc_trace(dev, "lmc_init_one out");
     return 0;
 
- out4:
-    lmc_proto_detach(sc);
- out3:
-    if (pdev) {
-	    pci_release_regions(pdev);
-	    pci_set_drvdata(pdev, NULL);
-    }
- out2:
-    free_netdev(dev);
- out1:
-    return err;
+err_hdlcdev:
+	pci_set_drvdata(pdev, NULL);
+	kfree(sc);
+err_kzalloc:
+	pci_release_regions(pdev);
+err_req_io:
+	pci_disable_device(pdev);
+	return err;
 }
 
 /*
  * Called from pci when removing module.
  */
-static void __devexit lmc_remove_one (struct pci_dev *pdev)
+static void __devexit lmc_remove_one(struct pci_dev *pdev)
 {
-    struct net_device *dev = pci_get_drvdata(pdev);
-    
-    if (dev) {
-	    lmc_softc_t *sc = dev->priv;
-	    
-	    printk("%s: removing...\n", dev->name);
-	    lmc_proto_detach(sc);
-	    unregister_netdev(dev);
-	    free_netdev(dev);
-	    pci_release_regions(pdev);
-	    pci_disable_device(pdev);
-	    pci_set_drvdata(pdev, NULL);
-    }
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	if (dev) {
+		printk(KERN_DEBUG "%s: removing...\n", dev->name);
+		unregister_hdlc_device(dev);
+		free_netdev(dev);
+		pci_release_regions(pdev);
+		pci_disable_device(pdev);
+		pci_set_drvdata(pdev, NULL);
+	}
 }
 
 /* After this is called, packets can be sent.
  * Does not initialize the addresses
  */
-static int lmc_open (struct net_device *dev) /*fold00*/
+static int lmc_open(struct net_device *dev)
 {
-    lmc_softc_t *sc = dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
+    int err;
 
     lmc_trace(dev, "lmc_open in");
 
     lmc_led_on(sc, LMC_DS3_LED0);
 
-    lmc_dec_reset (sc);
-    lmc_reset (sc);
+    lmc_dec_reset(sc);
+    lmc_reset(sc);
 
-    LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
-    LMC_EVENT_LOG(LMC_EVENT_RESET2,
-                  lmc_mii_readreg (sc, 0, 16),
-                  lmc_mii_readreg (sc, 0, 17));
-
+    LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ(sc, csr_status), 0);
+    LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg(sc, 0, 16),
+		  lmc_mii_readreg(sc, 0, 17));
 
     if (sc->lmc_ok){
         lmc_trace(dev, "lmc_open lmc_ok out");
···
 
     /* dev->flags |= IFF_UP; */
 
-    lmc_proto_open(sc);
+    if ((err = lmc_proto_open(sc)) != 0)
+	    return err;
 
     dev->do_ioctl = lmc_ioctl;
 
 
     netif_start_queue(dev);
-    
-    sc->stats.tx_tbusy0++ ;
+    sc->extra_stats.tx_tbusy0++;
 
     /*
      * select what interrupts we want to get
···
 
 static void lmc_running_reset (struct net_device *dev) /*fold00*/
 {
-
-    lmc_softc_t *sc = (lmc_softc_t *) dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
 
     lmc_trace(dev, "lmc_runnig_reset in");
 
···
     netif_wake_queue(dev);
 
     sc->lmc_txfull = 0;
-    sc->stats.tx_tbusy0++ ;
+    sc->extra_stats.tx_tbusy0++;
 
     sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK;
     LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
···
  * This disables the timer for the watchdog and keepalives,
  * and disables the irq for dev.
  */
-static int lmc_close (struct net_device *dev) /*fold00*/
+static int lmc_close(struct net_device *dev)
 {
     /* not calling release_region() as we should */
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
 
     lmc_trace(dev, "lmc_close in");
-    
-    sc = dev->priv;
+
     sc->lmc_ok = 0;
     sc->lmc_media->set_link_status (sc, 0);
     del_timer (&sc->timer);
···
     lmc_ifdown (dev);
 
     lmc_trace(dev, "lmc_close out");
-    
+
     return 0;
 }
 
···
 /* When the interface goes down, this is called */
 static int lmc_ifdown (struct net_device *dev) /*fold00*/
 {
-    lmc_softc_t *sc = dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 csr6;
     int i;
 
     lmc_trace(dev, "lmc_ifdown in");
-    
+
     /* Don't let anything else go on right now */
     //    dev->start = 0;
     netif_stop_queue(dev);
-    sc->stats.tx_tbusy1++ ;
+    sc->extra_stats.tx_tbusy1++;
 
     /* stop interrupts */
     /* Clear the interrupt mask */
···
     csr6 &= ~LMC_DEC_SR;		/* Turn off the Receive bit */
     LMC_CSR_WRITE (sc, csr_command, csr6);
 
-    sc->stats.rx_missed_errors +=
-        LMC_CSR_READ (sc, csr_missed_frames) & 0xffff;
+    sc->lmc_device->stats.rx_missed_errors +=
+	    LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
 
     /* release the interrupt */
     if(sc->got_irq == 1){
···
     lmc_led_off (sc, LMC_MII16_LED_ALL);
 
     netif_wake_queue(dev);
-    sc->stats.tx_tbusy0++ ;
+    sc->extra_stats.tx_tbusy0++;
 
     lmc_trace(dev, "lmc_ifdown out");
 
···
 static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
 {
     struct net_device *dev = (struct net_device *) dev_instance;
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 csr;
     int i;
     s32 stat;
···
 
     lmc_trace(dev, "lmc_interrupt in");
 
-    sc = dev->priv;
-    
     spin_lock(&sc->lmc_lock);
 
     /*
···
 
 	    int		n_compl = 0 ;
             /* reset the transmit timeout detection flag -baz */
-            sc->stats.tx_NoCompleteCnt = 0;
+	    sc->extra_stats.tx_NoCompleteCnt = 0;
 
             badtx = sc->lmc_taint_tx;
             i = badtx % LMC_TXDESCS;
···
                 if (sc->lmc_txq[i] == NULL)
                     continue;
 
-                /*
-                 * Check the total error summary to look for any errors
-                 */
-                if (stat & 0x8000) {
-                    sc->stats.tx_errors++;
-                    if (stat & 0x4104)
-                        sc->stats.tx_aborted_errors++;
-                    if (stat & 0x0C00)
-                        sc->stats.tx_carrier_errors++;
-                    if (stat & 0x0200)
-                        sc->stats.tx_window_errors++;
-                    if (stat & 0x0002)
-                        sc->stats.tx_fifo_errors++;
+		/*
+		 * Check the total error summary to look for any errors
+		 */
+		if (stat & 0x8000) {
+			sc->lmc_device->stats.tx_errors++;
+			if (stat & 0x4104)
+				sc->lmc_device->stats.tx_aborted_errors++;
+			if (stat & 0x0C00)
+				sc->lmc_device->stats.tx_carrier_errors++;
+			if (stat & 0x0200)
+				sc->lmc_device->stats.tx_window_errors++;
+			if (stat & 0x0002)
+				sc->lmc_device->stats.tx_fifo_errors++;
+		} else {
+			sc->lmc_device->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
+
+			sc->lmc_device->stats.tx_packets++;
                 }
-                else {
-                    
-                    sc->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
-                    
-                    sc->stats.tx_packets++;
-                }
-                
+
                 //                dev_kfree_skb(sc->lmc_txq[i]);
                 dev_kfree_skb_irq(sc->lmc_txq[i]);
                 sc->lmc_txq[i] = NULL;
···
             LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0);
             sc->lmc_txfull = 0;
             netif_wake_queue(dev);
-            sc->stats.tx_tbusy0++ ;
+	    sc->extra_stats.tx_tbusy0++;
 
 
 #ifdef DEBUG
-            sc->stats.dirtyTx = badtx;
-            sc->stats.lmc_next_tx = sc->lmc_next_tx;
-            sc->stats.lmc_txfull = sc->lmc_txfull;
+	    sc->extra_stats.dirtyTx = badtx;
+	    sc->extra_stats.lmc_next_tx = sc->lmc_next_tx;
+	    sc->extra_stats.lmc_txfull = sc->lmc_txfull;
 #endif
             sc->lmc_taint_tx = badtx;
 
···
     return IRQ_RETVAL(handled);
 }
 
-static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00*/
+static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 flag;
     int entry;
     int ret = 0;
     unsigned long flags;
 
     lmc_trace(dev, "lmc_start_xmit in");
-
-    sc = dev->priv;
 
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
···
     if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1)
     {				/* ring full, go busy */
         sc->lmc_txfull = 1;
-        netif_stop_queue(dev);
-        sc->stats.tx_tbusy1++ ;
+	netif_stop_queue(dev);
+	sc->extra_stats.tx_tbusy1++;
         LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0);
     }
 #endif
···
      * the watchdog timer handler. -baz
      */
 
-    sc->stats.tx_NoCompleteCnt++;
+    sc->extra_stats.tx_NoCompleteCnt++;
     sc->lmc_next_tx++;
 
     /* give ownership to the chip */
···
 }
 
 
-static int lmc_rx (struct net_device *dev) /*fold00*/
+static int lmc_rx(struct net_device *dev)
 {
-    lmc_softc_t *sc;
+    lmc_softc_t *sc = dev_to_sc(dev);
     int i;
     int rx_work_limit = LMC_RXDESCS;
     unsigned int next_rx;
···
     u16 len;
 
     lmc_trace(dev, "lmc_rx in");
-
-    sc = dev->priv;
 
     lmc_led_on(sc, LMC_DS3_LED3);
 
···
         rxIntLoopCnt++;		/* debug -baz */
         len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER);
         if ((stat & 0x0300) != 0x0300) {  /* Check first segment and last segment */
-            if ((stat & 0x0000ffff) != 0x7fff) {
-                /* Oversized frame */
-                sc->stats.rx_length_errors++;
-                goto skip_packet;
-            }
-        }
+		if ((stat & 0x0000ffff) != 0x7fff) {
+			/* Oversized frame */
+			sc->lmc_device->stats.rx_length_errors++;
+			goto skip_packet;
+		}
+	}
 
-        if(stat & 0x00000008){ /* Catch a dribbling bit error */
-            sc->stats.rx_errors++;
-            sc->stats.rx_frame_errors++;
-            goto skip_packet;
-        }
-
-
-        if(stat & 0x00000004){ /* Catch a CRC error by the Xilinx */
-            sc->stats.rx_errors++;
-            sc->stats.rx_crc_errors++;
-            goto skip_packet;
-        }
+	if (stat & 0x00000008) { /* Catch a dribbling bit error */
+		sc->lmc_device->stats.rx_errors++;
+		sc->lmc_device->stats.rx_frame_errors++;
+		goto skip_packet;
+	}
 
 
-        if (len > LMC_PKT_BUF_SZ){
-            sc->stats.rx_length_errors++;
-            localLengthErrCnt++;
-            goto skip_packet;
-        }
+	if (stat & 0x00000004) { /* Catch a CRC error by the Xilinx */
+		sc->lmc_device->stats.rx_errors++;
+		sc->lmc_device->stats.rx_crc_errors++;
+		goto skip_packet;
+	}
 
-        if (len < sc->lmc_crcSize + 2) {
-            sc->stats.rx_length_errors++;
-            sc->stats.rx_SmallPktCnt++;
-            localLengthErrCnt++;
-            goto skip_packet;
-        }
+	if (len > LMC_PKT_BUF_SZ) {
+		sc->lmc_device->stats.rx_length_errors++;
+		localLengthErrCnt++;
+		goto skip_packet;
+	}
+
+	if (len < sc->lmc_crcSize + 2) {
+		sc->lmc_device->stats.rx_length_errors++;
+		sc->extra_stats.rx_SmallPktCnt++;
+		localLengthErrCnt++;
+		goto skip_packet;
+	}
 
         if(stat & 0x00004000){
             printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name);
···
         }
         
         dev->last_rx = jiffies;
-        sc->stats.rx_packets++;
-        sc->stats.rx_bytes += len;
+	sc->lmc_device->stats.rx_packets++;
+	sc->lmc_device->stats.rx_bytes += len;
 
         LMC_CONSOLE_LOG("recv", skb->data, len);
 
···
 
             skb_put (skb, len);
             skb->protocol = lmc_proto_type(sc, skb);
-            skb->protocol = htons(ETH_P_WAN_PPP);
             skb_reset_mac_header(skb);
             /* skb_reset_network_header(skb); */
             skb->dev = dev;
···
                  * in which care we'll try to allocate the buffer
                  * again.  (once a second)
                  */
-                sc->stats.rx_BuffAllocErr++;
+		sc->extra_stats.rx_BuffAllocErr++;
                 LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
                 sc->failed_recv_alloc = 1;
                 goto skip_out_of_mem;
···
      * descriptors with bogus packets
      *
     if (localLengthErrCnt > LMC_RXDESCS - 3) {
-        sc->stats.rx_BadPktSurgeCnt++;
-        LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE,
-                      localLengthErrCnt,
-                      sc->stats.rx_BadPktSurgeCnt);
+	sc->extra_stats.rx_BadPktSurgeCnt++;
+	LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, localLengthErrCnt,
+		      sc->extra_stats.rx_BadPktSurgeCnt);
     } */
 
     /* save max count of receive descriptors serviced */
-    if (rxIntLoopCnt > sc->stats.rxIntLoopCnt) {
-        sc->stats.rxIntLoopCnt = rxIntLoopCnt;	/* debug -baz */
-    }
+    if (rxIntLoopCnt > sc->extra_stats.rxIntLoopCnt)
+	    sc->extra_stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */
 
 #ifdef DEBUG
     if (rxIntLoopCnt == 0)
···
     return 0;
 }
 
-static struct net_device_stats *lmc_get_stats (struct net_device *dev) /*fold00*/
+static struct net_device_stats *lmc_get_stats(struct net_device *dev)
 {
-    lmc_softc_t *sc = dev->priv;
+    lmc_softc_t *sc = dev_to_sc(dev);
     unsigned long flags;
 
     lmc_trace(dev, "lmc_get_stats in");
 
-
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
-    sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff;
+    sc->lmc_device->stats.rx_missed_errors += LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
 
     spin_unlock_irqrestore(&sc->lmc_lock, flags);
 
     lmc_trace(dev, "lmc_get_stats out");
 
-    return (struct net_device_stats *) &sc->stats;
+    return &sc->lmc_device->stats;
 }
 
 static struct pci_driver lmc_driver = {
···
     {
         if (sc->lmc_txq[i] != NULL){		/* have buffer */
             dev_kfree_skb(sc->lmc_txq[i]);	/* free it */
-            sc->stats.tx_dropped++;      /* We just dropped a packet */
+	    sc->lmc_device->stats.tx_dropped++;	/* We just dropped a packet */
         }
         sc->lmc_txq[i] = NULL;
         sc->lmc_txring[i].status = 0x00000000;
···
     lmc_trace(sc->lmc_device, "lmc_softreset out");
 }
 
-void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
+void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in");
     sc->lmc_gpio_io &= ~bits;
···
     lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out");
 }
 
-void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
+void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in");
     sc->lmc_gpio_io |= bits;
···
     lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out");
 }
 
-void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
+void lmc_led_on(lmc_softc_t * const sc, u32 led) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_led_on in");
     if((~sc->lmc_miireg16) & led){ /* Already on! */
···
     lmc_trace(sc->lmc_device, "lmc_led_on out");
 }
 
-void lmc_led_off(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
+void lmc_led_off(lmc_softc_t * const sc, u32 led) /*fold00*/
 {
     lmc_trace(sc->lmc_device, "lmc_led_off in");
     if(sc->lmc_miireg16 & led){ /* Already set don't do anything */
···
      */
     sc->lmc_media->init(sc);
 
-    sc->stats.resetCount++;
+    sc->extra_stats.resetCount++;
     lmc_trace(sc->lmc_device, "lmc_reset out");
 }
 
 static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/
 {
-    u_int32_t val;
+    u32 val;
     lmc_trace(sc->lmc_device, "lmc_dec_reset in");
 
     /*
···
     lmc_trace(sc->lmc_device, "lmc_initcsrs out");
 }
 
-static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/
-    lmc_softc_t *sc;
+static void lmc_driver_timeout(struct net_device *dev)
+{
+    lmc_softc_t *sc = dev_to_sc(dev);
     u32 csr6;
     unsigned long flags;
 
     lmc_trace(dev, "lmc_driver_timeout in");
 
-    sc = dev->priv;
-
     spin_lock_irqsave(&sc->lmc_lock, flags);
 
     printk("%s: Xmitter busy|\n", dev->name);
 
-    sc->stats.tx_tbusy_calls++ ;
-    if (jiffies - dev->trans_start < TX_TIMEOUT) {
-        goto bug_out;
-    }
+    sc->extra_stats.tx_tbusy_calls++;
+    if (jiffies - dev->trans_start < TX_TIMEOUT)
+	    goto bug_out;
 
     /*
      * Chip seems to have locked up
···
 
     LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO,
                   LMC_CSR_READ (sc, csr_status),
-                  sc->stats.tx_ProcTimeout);
+		  sc->extra_stats.tx_ProcTimeout);
 
     lmc_running_reset (dev);
 
···
     /* immediate transmit */
     LMC_CSR_WRITE (sc, csr_txpoll, 0);
 
-    sc->stats.tx_errors++;
-    sc->stats.tx_ProcTimeout++;	/* -baz */
+    sc->lmc_device->stats.tx_errors++;
+    sc->extra_stats.tx_ProcTimeout++; /* -baz */
 
     dev->trans_start = jiffies;
 

drivers/net/wan/lmc/lmc_media.c

···
 #include <linux/inet.h>
 #include <linux/bitops.h>
 
-#include <net/syncppp.h>
-
 #include <asm/processor.h>             /* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/dma.h>
···
 static void lmc_dummy_set2_1 (lmc_softc_t * const, lmc_ctl_t *);
 
 static inline void write_av9110_bit (lmc_softc_t *, int);
-static void write_av9110 (lmc_softc_t *, u_int32_t, u_int32_t, u_int32_t,
-			  u_int32_t, u_int32_t);
+static void write_av9110(lmc_softc_t *, u32, u32, u32, u32, u32);
 
 lmc_media_t lmc_ds3_media = {
   lmc_ds3_init,			/* special media init stuff */
···
 static int
 lmc_ds3_get_link_status (lmc_softc_t * const sc)
 {
-    u_int16_t link_status, link_status_11;
+    u16 link_status, link_status_11;
     int ret = 1;
 
     lmc_mii_writereg (sc, 0, 17, 7);
···
         (link_status & LMC_FRAMER_REG0_OOFS)){
         ret = 0;
         if(sc->last_led_err[3] != 1){
-            u16 r1;
+	    u16 r1;
             lmc_mii_writereg (sc, 0, 17, 01); /* Turn on Xbit error as our cisco does */
             r1 = lmc_mii_readreg (sc, 0, 18);
             r1 &= 0xfe;
···
     else {
         lmc_led_off(sc, LMC_DS3_LED3);	/* turn on red LED */
         if(sc->last_led_err[3] == 1){
-            u16 r1;
+	    u16 r1;
             lmc_mii_writereg (sc, 0, 17, 01); /* Turn off Xbit error */
             r1 = lmc_mii_readreg (sc, 0, 18);
             r1 |= 0x01;
···
  *  SSI methods
  */
 
-static void
-lmc_ssi_init (lmc_softc_t * const sc)
+static void lmc_ssi_init(lmc_softc_t * const sc)
 {
-  u_int16_t mii17;
-  int cable;
+	u16 mii17;
+	int cable;
 
-  sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000;
+	sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000;
 
-  mii17 = lmc_mii_readreg (sc, 0, 17);
+	mii17 = lmc_mii_readreg(sc, 0, 17);
 
-  cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT;
-  sc->ictl.cable_type = cable;
+	cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT;
+	sc->ictl.cable_type = cable;
 
-  lmc_gpio_mkoutput (sc, LMC_GEP_SSI_TXCLOCK);
+	lmc_gpio_mkoutput(sc, LMC_GEP_SSI_TXCLOCK);
 }
 
 static void
···
 static int
 lmc_ssi_get_link_status (lmc_softc_t * const sc)
 {
-  u_int16_t link_status;
-  u_int32_t ticks;
+  u16 link_status;
+  u32 ticks;
   int ret = 1;
   int hw_hdsk = 1;
-  
+
   /*
    * missing CTS?  Hmm.  If we require CTS on, we may never get the
    * link to come up, so omit it in this test.
···
   }
   else if (ticks == 0 ) {				/* no clock found ? */
       ret = 0;
-      if(sc->last_led_err[3] != 1){
-          sc->stats.tx_lossOfClockCnt++;
-          printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name);
+      if (sc->last_led_err[3] != 1) {
+	      sc->extra_stats.tx_lossOfClockCnt++;
+	      printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name);
       }
       sc->last_led_err[3] = 1;
       lmc_led_on (sc, LMC_MII16_LED3);	/* turn ON red LED */
···
   LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
 }
 
-static void
-write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v,
-	      u_int32_t x, u_int32_t r)
+static void write_av9110(lmc_softc_t *sc, u32 n, u32 m, u32 v, u32 x, u32 r)
 {
   int i;
 
···
 		     | LMC_GEP_SSI_GENERATOR));
 }
 
-static void
-lmc_ssi_watchdog (lmc_softc_t * const sc)
+static void lmc_ssi_watchdog(lmc_softc_t * const sc)
 {
-  u_int16_t mii17 = lmc_mii_readreg (sc, 0, 17);
-  if (((mii17 >> 3) & 7) == 7)
-    {
-      lmc_led_off (sc, LMC_MII16_LED2);
-    }
-  else
-    {
-      lmc_led_on (sc, LMC_MII16_LED2);
-    }
-
+	u16 mii17 = lmc_mii_readreg(sc, 0, 17);
+	if (((mii17 >> 3) & 7) == 7)
+		lmc_led_off(sc, LMC_MII16_LED2);
+	else
+		lmc_led_on(sc, LMC_MII16_LED2);
 }
 
 /*
···
 static void
 lmc_t1_init (lmc_softc_t * const sc)
 {
-  u_int16_t mii16;
+  u16 mii16;
   int i;
 
   sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1200;
···
  */ static int
 lmc_t1_get_link_status (lmc_softc_t * const sc)
 {
-    u_int16_t link_status;
+    u16 link_status;
     int ret = 1;
 
   /* LMC5245 (DS3) & LMC1200 (DS1) LED definitions

drivers/net/wan/lmc/lmc_proto.c

···
 #include <linux/workqueue.h>
 #include <linux/proc_fs.h>
 #include <linux/bitops.h>
-
-#include <net/syncppp.h>
-
 #include <asm/processor.h>             /* Processor type for cache alignment. */
 #include <asm/io.h>
 #include <asm/dma.h>
···
 #include "lmc_ioctl.h"
 #include "lmc_proto.h"
 
-/*
- * The compile-time variable SPPPSTUP causes the module to be
- * compiled without referencing any of the sync ppp routines.
- */
-#ifdef SPPPSTUB
-#define SPPP_detach(d)	(void)0
-#define SPPP_open(d)	0
-#define SPPP_reopen(d)	(void)0
-#define SPPP_close(d)	(void)0
-#define SPPP_attach(d)	(void)0
-#define SPPP_do_ioctl(d,i,c)	-EOPNOTSUPP
-#else
-#define SPPP_attach(x)	sppp_attach((x)->pd)
-#define SPPP_detach(x)	sppp_detach((x)->pd->dev)
-#define SPPP_open(x)	sppp_open((x)->pd->dev)
-#define SPPP_reopen(x)	sppp_reopen((x)->pd->dev)
-#define SPPP_close(x)	sppp_close((x)->pd->dev)
-#define SPPP_do_ioctl(x, y, z)	sppp_do_ioctl((x)->pd->dev, (y), (z))
-#endif
-
-// init
-void lmc_proto_init(lmc_softc_t *sc) /*FOLD00*/
-{
-    lmc_trace(sc->lmc_device, "lmc_proto_init in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        sc->pd = kmalloc(sizeof(struct ppp_device), GFP_KERNEL);
-	if (!sc->pd) {
-		printk("lmc_proto_init(): kmalloc failure!\n");
-		return;
-	}
-        sc->pd->dev = sc->lmc_device;
-        sc->if_ptr = sc->pd;
-        break;
-    case LMC_RAW:
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_init out");
-}
-
 // attach
 void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
 {
···
     case LMC_PPP:
         {
             struct net_device *dev = sc->lmc_device;
-            SPPP_attach(sc);
             dev->do_ioctl = lmc_ioctl;
         }
         break;
···
         {
             struct net_device *dev = sc->lmc_device;
             /*
-             * They set a few basics because they don't use sync_ppp
+	     * They set a few basics because they don't use HDLC
              */
             dev->flags |= IFF_POINTOPOINT;
 
···
     lmc_trace(sc->lmc_device, "lmc_proto_attach out");
 }
 
-// detach
-void lmc_proto_detach(lmc_softc_t *sc) /*FOLD00*/
+int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd)
 {
-    switch(sc->if_type){
-    case LMC_PPP:
-        SPPP_detach(sc);
-        break;
-    case LMC_RAW: /* Tell someone we're detaching? */
-        break;
-    default:
-        break;
-    }
-
+	lmc_trace(sc->lmc_device, "lmc_proto_ioctl");
+	if (sc->if_type == LMC_PPP)
+		return hdlc_ioctl(sc->lmc_device, ifr, cmd);
+	return -EOPNOTSUPP;
 }
 
-// reopen
-void lmc_proto_reopen(lmc_softc_t *sc) /*FOLD00*/
+int lmc_proto_open(lmc_softc_t *sc)
 {
-    lmc_trace(sc->lmc_device, "lmc_proto_reopen in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        SPPP_reopen(sc);
-        break;
-    case LMC_RAW: /* Reset the interface after being down, prerape to receive packets again */
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_reopen out");
+	int ret = 0;
+
+	lmc_trace(sc->lmc_device, "lmc_proto_open in");
+
+	if (sc->if_type == LMC_PPP) {
+		ret = hdlc_open(sc->lmc_device);
+		if (ret < 0)
+			printk(KERN_WARNING "%s: HDLC open failed: %d\n",
+			       sc->name, ret);
+	}
+
+	lmc_trace(sc->lmc_device, "lmc_proto_open out");
+	return ret;
 }
 
-
-// ioctl
-int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd) /*FOLD00*/
+void lmc_proto_close(lmc_softc_t *sc)
 {
-    lmc_trace(sc->lmc_device, "lmc_proto_ioctl out");
-    switch(sc->if_type){
-    case LMC_PPP:
-        return SPPP_do_ioctl (sc, ifr, cmd);
-        break;
-    default:
-        return -EOPNOTSUPP;
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_ioctl out");
-}
+	lmc_trace(sc->lmc_device, "lmc_proto_close in");
 
-// open
-void lmc_proto_open(lmc_softc_t *sc) /*FOLD00*/
-{
-    int ret;
+	if (sc->if_type == LMC_PPP)
+		hdlc_close(sc->lmc_device);
 
-    lmc_trace(sc->lmc_device, "lmc_proto_open in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        ret = SPPP_open(sc);
-        if(ret < 0)
-            printk("%s: syncPPP open failed: %d\n", sc->name, ret);
-        break;
-    case LMC_RAW: /* We're about to start getting packets! */
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_open out");
-}
-
-// close
-
-void lmc_proto_close(lmc_softc_t *sc) /*FOLD00*/
-{
-    lmc_trace(sc->lmc_device, "lmc_proto_close in");
-    switch(sc->if_type){
-    case LMC_PPP:
-        SPPP_close(sc);
-        break;
-    case LMC_RAW: /* Interface going down */
-        break;
-    default:
-        break;
-    }
-    lmc_trace(sc->lmc_device, "lmc_proto_close out");
+	lmc_trace(sc->lmc_device, "lmc_proto_close out");
 }
 
 __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
···
     lmc_trace(sc->lmc_device, "lmc_proto_type in");
     switch(sc->if_type){
     case LMC_PPP:
-        return htons(ETH_P_WAN_PPP);
-        break;
+	    return hdlc_type_trans(skb, sc->lmc_device);
+	    break;
     case LMC_NET:
         return htons(ETH_P_802_2);
         break;
···
     }
     lmc_trace(sc->lmc_device, "lmc_proto_netif out");
 }
-

drivers/net/wan/lmc/lmc_proto.h

···
 #ifndef _LMC_PROTO_H_
 #define _LMC_PROTO_H_
 
-void lmc_proto_init(lmc_softc_t *sc);
+#include <linux/hdlc.h>
+
 void lmc_proto_attach(lmc_softc_t *sc);
-void lmc_proto_detach(lmc_softc_t *sc);
-void lmc_proto_reopen(lmc_softc_t *sc);
 int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd);
-void lmc_proto_open(lmc_softc_t *sc);
+int lmc_proto_open(lmc_softc_t *sc);
 void lmc_proto_close(lmc_softc_t *sc);
 __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb);
 void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb);
-int lmc_skb_rawpackets(char *buf, char **start, off_t offset, int len, int unused);
+
+static inline lmc_softc_t* dev_to_sc(struct net_device *dev)
+{
+	return (lmc_softc_t *)dev_to_hdlc(dev)->priv;
+}
 
 #endif
-

drivers/net/wan/lmc/lmc_var.h

···
 #ifndef _LMC_VAR_H_
 #define _LMC_VAR_H_
 
-/* $Id: lmc_var.h,v 1.17 2000/04/06 12:16:47 asj Exp $ */
-
  /*
   * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
   * All rights reserved.  www.lanmedia.com
···
 
 #include <linux/timer.h>
 
-#ifndef __KERNEL__
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32 
-
-#endif
-
 /*
  * basic definitions used in lmc include files
  */
···
 typedef struct lmc___ctl lmc_ctl_t;
 
 #define lmc_csrptr_t    unsigned long
-#define u_int16_t	u16
-#define u_int8_t	u8
-#define tulip_uint32_t	u32
 
 #define LMC_REG_RANGE 0x80
 
···
  *  used to define bits in the second tulip_desc_t field (length)
  *  for the transmit descriptor -baz */
 
-#define LMC_TDES_FIRST_BUFFER_SIZE       ((u_int32_t)(0x000007FF))
-#define LMC_TDES_SECOND_BUFFER_SIZE      ((u_int32_t)(0x003FF800))
-#define LMC_TDES_HASH_FILTERING          ((u_int32_t)(0x00400000))
-#define LMC_TDES_DISABLE_PADDING         ((u_int32_t)(0x00800000))
-#define LMC_TDES_SECOND_ADDR_CHAINED     ((u_int32_t)(0x01000000))
-#define LMC_TDES_END_OF_RING             ((u_int32_t)(0x02000000))
-#define LMC_TDES_ADD_CRC_DISABLE         ((u_int32_t)(0x04000000))
-#define LMC_TDES_SETUP_PACKET            ((u_int32_t)(0x08000000))
-#define LMC_TDES_INVERSE_FILTERING       ((u_int32_t)(0x10000000))
-#define LMC_TDES_FIRST_SEGMENT           ((u_int32_t)(0x20000000))
-#define LMC_TDES_LAST_SEGMENT            ((u_int32_t)(0x40000000))
-#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u_int32_t)(0x80000000))
+#define LMC_TDES_FIRST_BUFFER_SIZE       ((u32)(0x000007FF))
+#define LMC_TDES_SECOND_BUFFER_SIZE      ((u32)(0x003FF800))
+#define LMC_TDES_HASH_FILTERING          ((u32)(0x00400000))
+#define LMC_TDES_DISABLE_PADDING         ((u32)(0x00800000))
+#define LMC_TDES_SECOND_ADDR_CHAINED     ((u32)(0x01000000))
+#define LMC_TDES_END_OF_RING             ((u32)(0x02000000))
+#define LMC_TDES_ADD_CRC_DISABLE         ((u32)(0x04000000))
+#define LMC_TDES_SETUP_PACKET            ((u32)(0x08000000))
+#define LMC_TDES_INVERSE_FILTERING       ((u32)(0x10000000))
+#define LMC_TDES_FIRST_SEGMENT           ((u32)(0x20000000))
+#define LMC_TDES_LAST_SEGMENT            ((u32)(0x40000000))
+#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u32)(0x80000000))
 
 #define TDES_SECOND_BUFFER_SIZE_BIT_NUMBER  11
 #define TDES_COLLISION_COUNT_BIT_NUMBER     3
 
 /* Constants for the RCV descriptor RDES */
 
-#define LMC_RDES_OVERFLOW             ((u_int32_t)(0x00000001))
-#define LMC_RDES_CRC_ERROR            ((u_int32_t)(0x00000002))
-#define LMC_RDES_DRIBBLING_BIT            ((u_int32_t)(0x00000004))
-#define LMC_RDES_REPORT_ON_MII_ERR    ((u_int32_t)(0x00000008))
-#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u_int32_t)(0x00000010))
-#define LMC_RDES_FRAME_TYPE           ((u_int32_t)(0x00000020))
-#define LMC_RDES_COLLISION_SEEN       ((u_int32_t)(0x00000040))
-#define LMC_RDES_FRAME_TOO_LONG       ((u_int32_t)(0x00000080))
-#define LMC_RDES_LAST_DESCRIPTOR      ((u_int32_t)(0x00000100))
-#define LMC_RDES_FIRST_DESCRIPTOR     ((u_int32_t)(0x00000200))
-#define LMC_RDES_MULTICAST_FRAME      ((u_int32_t)(0x00000400))
-#define LMC_RDES_RUNT_FRAME           ((u_int32_t)(0x00000800))
-#define LMC_RDES_DATA_TYPE            ((u_int32_t)(0x00003000))
-#define LMC_RDES_LENGTH_ERROR         ((u_int32_t)(0x00004000))
-#define LMC_RDES_ERROR_SUMMARY        ((u_int32_t)(0x00008000))
-#define LMC_RDES_FRAME_LENGTH         ((u_int32_t)(0x3FFF0000))
-#define LMC_RDES_OWN_BIT              ((u_int32_t)(0x80000000))
+#define LMC_RDES_OVERFLOW             ((u32)(0x00000001))
+#define LMC_RDES_CRC_ERROR            ((u32)(0x00000002))
+#define LMC_RDES_DRIBBLING_BIT        ((u32)(0x00000004))
+#define LMC_RDES_REPORT_ON_MII_ERR    ((u32)(0x00000008))
+#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u32)(0x00000010))
+#define LMC_RDES_FRAME_TYPE           ((u32)(0x00000020))
+#define LMC_RDES_COLLISION_SEEN       ((u32)(0x00000040))
+#define LMC_RDES_FRAME_TOO_LONG       ((u32)(0x00000080))
+#define LMC_RDES_LAST_DESCRIPTOR      ((u32)(0x00000100))
+#define LMC_RDES_FIRST_DESCRIPTOR     ((u32)(0x00000200))
+#define LMC_RDES_MULTICAST_FRAME      ((u32)(0x00000400))
+#define LMC_RDES_RUNT_FRAME           ((u32)(0x00000800))
+#define LMC_RDES_DATA_TYPE            ((u32)(0x00003000))
+#define LMC_RDES_LENGTH_ERROR         ((u32)(0x00004000))
+#define LMC_RDES_ERROR_SUMMARY        ((u32)(0x00008000))
+#define LMC_RDES_FRAME_LENGTH         ((u32)(0x3FFF0000))
+#define LMC_RDES_OWN_BIT              ((u32)(0x80000000))
 
 #define RDES_FRAME_LENGTH_BIT_NUMBER       16
 
-#define LMC_RDES_ERROR_MASK ( (u_int32_t)( \
+#define LMC_RDES_ERROR_MASK ( (u32)( \
 	  LMC_RDES_OVERFLOW \
 	| LMC_RDES_DRIBBLING_BIT \
 	| LMC_RDES_REPORT_ON_MII_ERR \
···
  */
 
 typedef struct {
-	u_int32_t	n;
-	u_int32_t	m;
-	u_int32_t	v;
-	u_int32_t	x;
-	u_int32_t	r;
-	u_int32_t	f;
-	u_int32_t	exact;
+	u32	n;
+	u32	m;
+	u32	v;
+	u32	x;
+	u32	r;
+	u32	f;
+	u32	exact;
 } lmc_av9110_t;
 
 /*
  * Common structure passed to the ioctl code.
  */
 struct lmc___ctl {
-	u_int32_t	cardtype;
-	u_int32_t	clock_source;		/* HSSI, T1 */
-	u_int32_t	clock_rate;		/* T1 */
-	u_int32_t	crc_length;
-	u_int32_t	cable_length;		/* DS3 */
-	u_int32_t	scrambler_onoff;	/* DS3 */
-	u_int32_t	cable_type;		/* T1 */
-	u_int32_t	keepalive_onoff;	/* protocol */
-	u_int32_t	ticks;			/* ticks/sec */
+	u32	cardtype;
+	u32	clock_source;		/* HSSI, T1 */
+	u32	clock_rate;		/* T1 */
+	u32	crc_length;
+	u32	cable_length;		/* DS3 */
+	u32	scrambler_onoff;	/* DS3 */
+	u32	cable_type;		/* T1 */
+	u32	keepalive_onoff;	/* protocol */
+	u32	ticks;			/* ticks/sec */
 	union {
 		lmc_av9110_t	ssi;
 	} cardspec;
-	u_int32_t       circuit_type;   /* T1 or E1 */
+	u32       circuit_type;   /* T1 or E1 */
 };
 
 
···
 
 #define STATCHECK     0xBEEFCAFE
 
-/*  Included in this structure are first
- *   - standard net_device_stats
- *   - some other counters used for debug and driver performance
- *  evaluation -baz
- */
-struct lmc_statistics
+struct lmc_extra_statistics
 {
-        unsigned long     rx_packets;             /* total packets received       */
-        unsigned long     tx_packets;             /* total packets transmitted    */
-	unsigned long     rx_bytes;
-        unsigned long     tx_bytes;
-        
-        unsigned long     rx_errors;              /* bad packets received         */
-        unsigned long     tx_errors;              /* packet transmit problems     */
-        unsigned long     rx_dropped;             /* no space in linux buffers    */
-        unsigned long     tx_dropped;             /* no space available in linux  */
-        unsigned long     multicast;              /* multicast packets received   */
-        unsigned long     collisions;
+	u32       version_size;
+	u32       lmc_cardtype;
 
-        /* detailed rx_errors: */
-        unsigned long     rx_length_errors;
-        unsigned long     rx_over_errors;         /* receiver ring buff overflow  */
-        unsigned long     rx_crc_errors;          /* recved pkt with crc error    */
-        unsigned long     rx_frame_errors;        /* recv'd frame alignment error */
-        unsigned long     rx_fifo_errors;         /* recv'r fifo overrun          */
-        unsigned long     rx_missed_errors;       /* receiver missed packet       */
+	u32       tx_ProcTimeout;
+	u32       tx_IntTimeout;
+	u32       tx_NoCompleteCnt;
+	u32       tx_MaxXmtsB4Int;
+	u32       tx_TimeoutCnt;
+	u32       tx_OutOfSyncPtr;
+	u32       tx_tbusy0;
+	u32       tx_tbusy1;
+	u32       tx_tbusy_calls;
+	u32       resetCount;
+	u32       lmc_txfull;
+	u32       tbusy;
+	u32       dirtyTx;
+	u32       lmc_next_tx;
+	u32       otherTypeCnt;
+	u32       lastType;
+	u32       lastTypeOK;
+	u32       txLoopCnt;
+	u32       usedXmtDescripCnt;
+	u32       txIndexCnt;
+	u32       rxIntLoopCnt;
 
-        /* detailed tx_errors */
-        unsigned long     tx_aborted_errors;
-        unsigned long     tx_carrier_errors;
-        unsigned long     tx_fifo_errors;
-        unsigned long     tx_heartbeat_errors;
-        unsigned long     tx_window_errors;
+	u32       rx_SmallPktCnt;
+	u32       rx_BadPktSurgeCnt;
+	u32       rx_BuffAllocErr;
+	u32       tx_lossOfClockCnt;
 
-        /* for cslip etc */
-        unsigned long rx_compressed;
-        unsigned long tx_compressed;
+	/* T1 error counters */
+	u32       framingBitErrorCount;
+	u32       lineCodeViolationCount;
 
-        /* -------------------------------------
-         * Custom stats & counters follow -baz */
-        u_int32_t       version_size;
-        u_int32_t       lmc_cardtype;
+	u32       lossOfFrameCount;
+	u32       changeOfFrameAlignmentCount;
+	u32       severelyErroredFrameCount;
 
-        u_int32_t       tx_ProcTimeout;
-        u_int32_t       tx_IntTimeout;
-        u_int32_t       tx_NoCompleteCnt;
-        u_int32_t       tx_MaxXmtsB4Int;
-        u_int32_t       tx_TimeoutCnt;
-        u_int32_t       tx_OutOfSyncPtr;
-        u_int32_t       tx_tbusy0;
-        u_int32_t       tx_tbusy1;
-        u_int32_t       tx_tbusy_calls;
-        u_int32_t       resetCount;
-        u_int32_t       lmc_txfull;
-        u_int32_t       tbusy;
-        u_int32_t       dirtyTx;
-        u_int32_t       lmc_next_tx;
-        u_int32_t       otherTypeCnt;
-        u_int32_t       lastType;
-        u_int32_t       lastTypeOK;
-        u_int32_t       txLoopCnt;
-        u_int32_t       usedXmtDescripCnt;
-        u_int32_t       txIndexCnt;
-        u_int32_t       rxIntLoopCnt;
-
-        u_int32_t       rx_SmallPktCnt;
-        u_int32_t       rx_BadPktSurgeCnt;
-        u_int32_t       rx_BuffAllocErr;
-        u_int32_t       tx_lossOfClockCnt;
-
-        /* T1 error counters */
-        u_int32_t       framingBitErrorCount;
-        u_int32_t       lineCodeViolationCount;
-
-        u_int32_t       lossOfFrameCount;
-        u_int32_t       changeOfFrameAlignmentCount;
-        u_int32_t       severelyErroredFrameCount;
-
-        u_int32_t       check;
+	u32       check;
 };
 
-
 typedef struct lmc_xinfo {
-        u_int32_t       Magic0;                         /* BEEFCAFE */
+	u32       Magic0;                         /* BEEFCAFE */
 
-        u_int32_t       PciCardType;
-        u_int32_t       PciSlotNumber;          /* PCI slot number       */
+	u32       PciCardType;
+	u32       PciSlotNumber;          /* PCI slot number       */
 
-        u_int16_t       DriverMajorVersion;
-        u_int16_t       DriverMinorVersion;
-        u_int16_t       DriverSubVersion;
+	u16	       DriverMajorVersion;
+	u16	       DriverMinorVersion;
+	u16	       DriverSubVersion;
 
-        u_int16_t       XilinxRevisionNumber;
-        u_int16_t       MaxFrameSize;
+	u16	       XilinxRevisionNumber;
+	u16	       MaxFrameSize;
 
-        u_int16_t       t1_alarm1_status;
-        u_int16_t       t1_alarm2_status;
+	u16     	  t1_alarm1_status;
+	u16       	t1_alarm2_status;
 
-        int                     link_status;
-        u_int32_t       mii_reg16;
+	int             link_status;
+	u32       mii_reg16;
 
-        u_int32_t       Magic1;                         /* DEADBEEF */
+	u32       Magic1;                         /* DEADBEEF */
 } LMC_XINFO;
 
 
···
  * forward decl
  */
 struct lmc___softc {
-        void *if_ptr;   /* General purpose pointer (used by SPPP) */
 	char                   *name;
 	u8			board_idx;
-	struct lmc_statistics   stats;
-	struct net_device          *lmc_device;
+	struct lmc_extra_statistics extra_stats;
+	struct net_device      *lmc_device;
 
 	int                     hang, rxdesc, bad_packet, some_counter;
-	u_int32_t               txgo;
+	u32  	         	txgo;
 	struct lmc_regfile_t	lmc_csrs;
-	volatile u_int32_t	lmc_txtick;
-	volatile u_int32_t	lmc_rxtick;
-	u_int32_t		lmc_flags;
-	u_int32_t		lmc_intrmask;	/* our copy of csr_intr */
-	u_int32_t		lmc_cmdmode;	/* our copy of csr_cmdmode */
-	u_int32_t		lmc_busmode;	/* our copy of csr_busmode */
-	u_int32_t		lmc_gpio_io;	/* state of in/out settings */
-	u_int32_t		lmc_gpio;	/* state of outputs */
+	volatile u32		lmc_txtick;
+	volatile u32		lmc_rxtick;
+	u32			lmc_flags;
+	u32			lmc_intrmask;	/* our copy of csr_intr */
+	u32			lmc_cmdmode;	/* our copy of csr_cmdmode */
+	u32			lmc_busmode;	/* our copy of csr_busmode */
+	u32			lmc_gpio_io;	/* state of in/out settings */
+	u32			lmc_gpio;	/* state of outputs */
 	struct sk_buff*		lmc_txq[LMC_TXDESCS];
 	struct sk_buff*		lmc_rxq[LMC_RXDESCS];
 	volatile
···
 	unsigned int		lmc_taint_tx, lmc_taint_rx;
 	int			lmc_tx_start, lmc_txfull;
 	int			lmc_txbusy;
-	u_int16_t		lmc_miireg16;
+	u16			lmc_miireg16;
 	int			lmc_ok;
 	int			last_link_status;
 	int			lmc_cardtype;
-	u_int32_t               last_frameerr;
+	u32               	last_frameerr;
 	lmc_media_t	       *lmc_media;
 	struct timer_list	timer;
 	lmc_ctl_t		ictl;
-	u_int32_t		TxDescriptControlInit;  
+	u32			TxDescriptControlInit;
 
 	int                     tx_TimeoutInd; /* additional driver state */
 	int                     tx_TimeoutDisplay;
 	unsigned int		lastlmc_taint_tx;
 	int                     lasttx_packets;
-	u_int32_t		tx_clockState;
-	u_int32_t		lmc_crcSize;
-	LMC_XINFO		lmc_xinfo; 
+	u32			tx_clockState;
+	u32			lmc_crcSize;
+	LMC_XINFO		lmc_xinfo;
 	char                    lmc_yel, lmc_blue, lmc_red; /* for T1 and DS3 */
-        char                    lmc_timing; /* for HSSI and SSI */
-        int                     got_irq;
+	char                    lmc_timing; /* for HSSI and SSI */
+	int                     got_irq;
 
-        char                    last_led_err[4];
+	char                    last_led_err[4];
 
-        u32                     last_int;
-        u32                     num_int;
+	u32                     last_int;
+	u32                     num_int;
 
 	spinlock_t              lmc_lock;
-        u_int16_t               if_type;       /* PPP or NET */
-        struct ppp_device       *pd;
+	u16			if_type;       /* HDLC/PPP or NET */
 
-        /* Failure cases */
-        u8                       failed_ring;
-        u8                       failed_recv_alloc;
+	/* Failure cases */
+	u8			failed_ring;
+	u8			failed_recv_alloc;
 
-        /* Structure check */
-        u32                     check;
+	/* Structure check */
+	u32                     check;
 };
 
 #define LMC_PCI_TIME 1
···
   | TULIP_STS_TXUNDERFLOW\
   | TULIP_STS_RXSTOPPED )
 
-#define DESC_OWNED_BY_SYSTEM   ((u_int32_t)(0x00000000))
-#define DESC_OWNED_BY_DC21X4   ((u_int32_t)(0x80000000))
+#define DESC_OWNED_BY_SYSTEM   ((u32)(0x00000000))
+#define DESC_OWNED_BY_DC21X4   ((u32)(0x80000000))
 
 #ifndef TULIP_CMD_RECEIVEALL
 #define TULIP_CMD_RECEIVEALL 0x40000000L
···
 #define LMC_ADAP_SSI            4
 #define LMC_ADAP_T1             5
 
-#define HDLC_HDR_LEN  4
-#define HDLC_ADDR_LEN 1
-#define HDLC_SLARP    0x8035
 #define LMC_MTU 1500
-#define SLARP_LINECHECK 2
 
 #define LMC_CRC_LEN_16 2  /* 16-bit CRC */
 #define LMC_CRC_LEN_32 4
-
-#ifdef LMC_HDLC
-/* definition of an hdlc header. */
-struct hdlc_hdr
-{
-	u8  address;
-	u8  control;
-	u16 type;
-};
-
-/* definition of a slarp header. */
-struct slarp
-{
-	long code;
-	union sl
-	{
-		struct
-		{
-			ulong address;
-			ulong mask;
-			ushort unused;
-		} add;
-		struct
-		{
-			ulong mysequence;
-			ulong yoursequence;
-			ushort reliability;
-			ulong time;
-		} chk;
-	} t;
-};
-#endif /* LMC_HDLC */
-
 
 #endif /* _LMC_VAR_H_ */

drivers/net/wan/pc300.h

···
 #define	_PC300_H
 
 #include <linux/hdlc.h>
-#include <net/syncppp.h>
 #include "hd64572.h"
 #include "pc300-falc-lh.h"
 
-#ifndef CY_TYPES
-#define CY_TYPES
-typedef	__u64	ucdouble;	/* 64 bits, unsigned */
-typedef	__u32	uclong;		/* 32 bits, unsigned */
-typedef	__u16	ucshort;	/* 16 bits, unsigned */
-typedef	__u8	ucchar;		/* 8 bits, unsigned */
-#endif /* CY_TYPES */
+#define PC300_PROTO_MLPPP 1
 
-#define PC300_PROTO_MLPPP 1		
-
-#define PC300_KERNEL	"2.4.x"	/* Kernel supported by this driver */
-
-#define	PC300_DEVNAME	"hdlc"	/* Dev. name base (for hdlc0, hdlc1, etc.) */
-#define PC300_MAXINDEX	100	/* Max dev. name index (the '0' in hdlc0) */
-
-#define	PC300_MAXCARDS	4	/* Max number of cards per system */
 #define	PC300_MAXCHAN	2	/* Number of channels per card */
 
-#define	PC300_PLX_WIN	0x80    /* PLX control window size (128b) */
 #define	PC300_RAMSIZE	0x40000 /* RAM window size (256Kb) */
-#define	PC300_SCASIZE	0x400   /* SCA window size (1Kb) */
 #define	PC300_FALCSIZE	0x400	/* FALC window size (1Kb) */
 
 #define PC300_OSC_CLOCK	24576000
···
  * Memory access functions/macros      *
  * (required to support Alpha systems) *
  ***************************************/
-#ifdef __KERNEL__
-#define cpc_writeb(port,val)	{writeb((ucchar)(val),(port)); mb();}
+#define cpc_writeb(port,val)	{writeb((u8)(val),(port)); mb();}
 #define cpc_writew(port,val)	{writew((ushort)(val),(port)); mb();}
-#define cpc_writel(port,val)	{writel((uclong)(val),(port)); mb();}
+#define cpc_writel(port,val)	{writel((u32)(val),(port)); mb();}
 
 #define cpc_readb(port)		readb(port)
 #define cpc_readw(port)		readw(port)
 #define cpc_readl(port)		readl(port)
-
-#else /* __KERNEL__ */
-#define cpc_writeb(port,val)	(*(volatile ucchar *)(port) = (ucchar)(val))
-#define cpc_writew(port,val)	(*(volatile ucshort *)(port) = (ucshort)(val))
-#define cpc_writel(port,val)	(*(volatile uclong *)(port) = (uclong)(val))
-
-#define cpc_readb(port)		(*(volatile ucchar *)(port))
-#define cpc_readw(port)		(*(volatile ucshort *)(port))
-#define cpc_readl(port)		(*(volatile uclong *)(port))
-
-#endif /* __KERNEL__ */
 
 /****** Data Structures *****************************************************/
 
···
  *      (memory mapped).
  */
 struct RUNTIME_9050 {
-	uclong	loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
-	uclong	loc_rom_range;		/* 10h : Local ROM Range */
-	uclong	loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
-	uclong	loc_rom_base;		/* 24h : Local ROM Base */
-	uclong	loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
-	uclong	rom_bus_descr;		/* 38h : ROM Bus Descriptor */
-	uclong	cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
-	uclong	intr_ctrl_stat;		/* 4Ch : Interrupt Control/Status */
-	uclong	init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
+	u32 loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
+	u32 loc_rom_range;	/* 10h : Local ROM Range */
+	u32 loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
+	u32 loc_rom_base;	/* 24h : Local ROM Base */
+	u32 loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
+	u32 rom_bus_descr;	/* 38h : ROM Bus Descriptor */
+	u32 cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
+	u32 intr_ctrl_stat;	/* 4Ch : Interrupt Control/Status */
+	u32 init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
 };
 
 #define PLX_9050_LINT1_ENABLE	0x01
···
 #define PC300_FALC_MAXLOOP	0x0000ffff	/* for falc_issue_cmd() */
 
 typedef struct falc {
-	ucchar sync;		/* If true FALC is synchronized */
-	ucchar active;		/* if TRUE then already active */
-	ucchar loop_active;	/* if TRUE a line loopback UP was received */
-	ucchar loop_gen;	/* if TRUE a line loopback UP was issued */
+	u8 sync;	/* If true FALC is synchronized */
+	u8 active;	/* if TRUE then already active */
+	u8 loop_active;	/* if TRUE a line loopback UP was received */
+	u8 loop_gen;	/* if TRUE a line loopback UP was issued */
 
-	ucchar num_channels;
-	ucchar offset;		/* 1 for T1, 0 for E1 */
-	ucchar full_bandwidth;
+	u8 num_channels;
+	u8 offset;	/* 1 for T1, 0 for E1 */
+	u8 full_bandwidth;
 
-	ucchar xmb_cause;
-	ucchar multiframe_mode;
+	u8 xmb_cause;
+	u8 multiframe_mode;
 
 	/* Statistics */
-	ucshort pden;	/* Pulse Density violation count */
-	ucshort los;	/* Loss of Signal count */
-	ucshort losr;	/* Loss of Signal recovery count */
-	ucshort lfa;	/* Loss of frame alignment count */
-	ucshort farec;	/* Frame Alignment Recovery count */
-	ucshort lmfa;	/* Loss of multiframe alignment count */
-	ucshort ais;	/* Remote Alarm indication Signal count */
-	ucshort sec;	/* One-second timer */
-	ucshort es;	/* Errored second */
-	ucshort rai;	/* remote alarm received */
-	ucshort bec;
-	ucshort fec;
-	ucshort cvc;
-	ucshort cec;
-	ucshort ebc;
+	u16 pden;	/* Pulse Density violation count */
+	u16 los;	/* Loss of Signal count */
+	u16 losr;	/* Loss of Signal recovery count */
+	u16 lfa;	/* Loss of frame alignment count */
+	u16 farec;	/* Frame Alignment Recovery count */
+	u16 lmfa;	/* Loss of multiframe alignment count */
+	u16 ais;	/* Remote Alarm indication Signal count */
+	u16 sec;	/* One-second timer */
+	u16 es;		/* Errored second */
+	u16 rai;	/* remote alarm received */
+	u16 bec;
+	u16 fec;
+	u16 cvc;
+	u16 cec;
+	u16 ebc;
 
 	/* Status */
-	ucchar red_alarm;
-	ucchar blue_alarm;
-	ucchar loss_fa;
-	ucchar yellow_alarm;
-	ucchar loss_mfa;
-	ucchar prbs;
+	u8 red_alarm;
+	u8 blue_alarm;
+	u8 loss_fa;
+	u8 yellow_alarm;
+	u8 loss_mfa;
+	u8 prbs;
 } falc_t;
 
 typedef struct falc_status {
-	ucchar sync;  /* If true FALC is synchronized */
-	ucchar red_alarm;
-	ucchar blue_alarm;
-	ucchar loss_fa;
-	ucchar yellow_alarm;
-	ucchar loss_mfa;
-	ucchar prbs;
+	u8 sync;	/* If true FALC is synchronized */
+	u8 red_alarm;
+	u8 blue_alarm;
+	u8 loss_fa;
+	u8 yellow_alarm;
+	u8 loss_mfa;
+	u8 prbs;
 } falc_status_t;
 
 typedef struct rsv_x21_status {
-	ucchar dcd;
-	ucchar dsr;
-	ucchar cts;
-	ucchar rts;
-	ucchar dtr;
+	u8 dcd;
+	u8 dsr;
+	u8 cts;
+	u8 rts;
+	u8 dtr;
 } rsv_x21_status_t;
 
 typedef struct pc300stats {
 	int hw_type;
-	uclong line_on;
-	uclong line_off;
+	u32 line_on;
+	u32 line_off;
 	struct net_device_stats gen_stats;
 	falc_t te_stats;
 } pc300stats_t;
···
 
 typedef struct pc300patterntst {
 	char patrntst_on;       /* 0 - off; 1 - on; 2 - read num_errors */
-	ucshort num_errors;
+	u16 num_errors;
 } pc300patterntst_t;
 
 typedef struct pc300dev {
-	void *if_ptr;		/* General purpose pointer */
 	struct pc300ch *chan;
-	ucchar trace_on;
-	uclong line_on;		/* DCD(X.21, RSV) / sync(TE) change counters */
-	uclong line_off;
-#ifdef __KERNEL__
+	u8 trace_on;
+	u32 line_on;		/* DCD(X.21, RSV) / sync(TE) change counters */
+	u32 line_off;
 	char name[16];
 	struct net_device *dev;
-
-	void *private;
-	struct sk_buff *tx_skb;
-	union {	/* This union has all the protocol-specific structures */
-		struct ppp_device pppdev;
-	}ifu;
 #ifdef CONFIG_PC300_MLPPP
 	void *cpc_tty;	/* information to PC300 TTY driver */
 #endif
-#endif /* __KERNEL__ */
 }pc300dev_t;
 
 typedef struct pc300hw {
···
 	int bus;		/* Bus (PCI, PMC, etc.) */
 	int nchan;		/* number of channels */
 	int irq;		/* interrupt request level */
-	uclong clock;		/* Board clock */
-	ucchar cpld_id;		/* CPLD ID (TE only) */
-	ucshort cpld_reg1;	/* CPLD reg 1 (TE only) */
-	ucshort cpld_reg2;	/* CPLD reg 2 (TE only) */
-	ucshort gpioc_reg;	/* PLX GPIOC reg */
-	ucshort intctl_reg;	/* PLX Int Ctrl/Status reg */
-	uclong iophys;		/* PLX registers I/O base */
-	uclong iosize;		/* PLX registers I/O size */
-	uclong plxphys;		/* PLX registers MMIO base (physical) */
+	u32 clock;		/* Board clock */
+	u8 cpld_id;		/* CPLD ID (TE only) */
+	u16 cpld_reg1;		/* CPLD reg 1 (TE only) */
+	u16 cpld_reg2;		/* CPLD reg 2 (TE only) */
+	u16 gpioc_reg;		/* PLX GPIOC reg */
+	u16 intctl_reg;		/* PLX Int Ctrl/Status reg */
+	u32 iophys;		/* PLX registers I/O base */
+	u32 iosize;		/* PLX registers I/O size */
+	u32 plxphys;		/* PLX registers MMIO base (physical) */
 	void __iomem * plxbase;	/* PLX registers MMIO base (virtual) */
-	uclong plxsize;		/* PLX registers MMIO size */
-	uclong scaphys;		/* SCA registers MMIO base (physical) */
+	u32 plxsize;		/* PLX registers MMIO size */
+	u32 scaphys;		/* SCA registers MMIO base (physical) */
 	void __iomem * scabase;	/* SCA registers MMIO base (virtual) */
-	uclong scasize;		/* SCA registers MMIO size */
-	uclong ramphys;		/* On-board RAM MMIO base (physical) */
+	u32 scasize;		/* SCA registers MMIO size */
+	u32 ramphys;		/* On-board RAM MMIO base (physical) */
 	void __iomem * rambase;	/* On-board RAM MMIO base (virtual) */
-	uclong alloc_ramsize;	/* RAM MMIO size allocated by the PCI bridge */
-	uclong ramsize;		/* On-board RAM MMIO size */
-	uclong falcphys;	/* FALC registers MMIO base (physical) */
+	u32 alloc_ramsize;	/* RAM MMIO size allocated by the PCI bridge */
+	u32 ramsize;		/* On-board RAM MMIO size */
+	u32 falcphys;		/* FALC registers MMIO base (physical) */
 	void __iomem * falcbase;/* FALC registers MMIO base (virtual) */
-	uclong falcsize;	/* FALC registers MMIO size */
+	u32 falcsize;		/* FALC registers MMIO size */
 } pc300hw_t;
 
 typedef struct pc300chconf {
-	sync_serial_settings	phys_settings;	/* Clock type/rate (in bps), 
+	sync_serial_settings	phys_settings;	/* Clock type/rate (in bps),
 						   loopback mode */
 	raw_hdlc_proto		proto_settings;	/* Encoding, parity (CRC) */
-	uclong media;		/* HW media (RS232, V.35, etc.) */
-	uclong proto;		/* Protocol (PPP, X.25, etc.) */
-	ucchar monitor;		/* Monitor mode (0 = off, !0 = on) */
+	u32 media;		/* HW media (RS232, V.35, etc.) */
+	u32 proto;		/* Protocol (PPP, X.25, etc.) */
 
 	/* TE-specific parameters */
-	ucchar lcode;		/* Line Code (AMI, B8ZS, etc.) */
-	ucchar fr_mode;		/* Frame Mode (ESF, D4, etc.) */
-	ucchar lbo;		/* Line Build Out */
-	ucchar rx_sens;		/* Rx Sensitivity (long- or short-haul) */
-	uclong tslot_bitmap;	/* bit[i]=1  =>  timeslot _i_ is active */
+	u8 lcode;		/* Line Code (AMI, B8ZS, etc.) */
+	u8 fr_mode;		/* Frame Mode (ESF, D4, etc.) */
+	u8 lbo;			/* Line Build Out */
+	u8 rx_sens;		/* Rx Sensitivity (long- or short-haul) */
+	u32 tslot_bitmap;	/* bit[i]=1  =>  timeslot _i_ is active */
 } pc300chconf_t;
 
 typedef struct pc300ch {
···
 	int channel;
 	pc300dev_t d;
 	pc300chconf_t conf;
-	ucchar tx_first_bd;	/* First TX DMA block descr. w/ data */
-	ucchar tx_next_bd;	/* Next free TX DMA block descriptor */
-	ucchar rx_first_bd;	/* First free RX DMA block descriptor */
-	ucchar rx_last_bd;	/* Last free RX DMA block descriptor */
-	ucchar nfree_tx_bd;	/* Number of free TX DMA block descriptors */
-	falc_t falc;		/* FALC structure (TE only) */
+	u8 tx_first_bd;	/* First TX DMA block descr. w/ data */
+	u8 tx_next_bd;	/* Next free TX DMA block descriptor */
+	u8 rx_first_bd;	/* First free RX DMA block descriptor */
+	u8 rx_last_bd;	/* Last free RX DMA block descriptor */
+	u8 nfree_tx_bd;	/* Number of free TX DMA block descriptors */
+	falc_t falc;	/* FALC structure (TE only) */
 } pc300ch_t;
 
 typedef struct pc300 {
 	pc300hw_t hw;			/* hardware config. */
 	pc300ch_t chan[PC300_MAXCHAN];
-#ifdef __KERNEL__
 	spinlock_t card_lock;
-#endif /* __KERNEL__ */
 } pc300_t;
 
 typedef struct pc300conf {
···
 #define PC300_TX_QUEUE_LEN	100
 #define	PC300_DEF_MTU		1600
 
-#ifdef __KERNEL__
 /* Function Prototypes */
-void tx_dma_start(pc300_t *, int);
 int cpc_open(struct net_device *dev);
-int cpc_set_media(hdlc_device *, int);
-#endif /* __KERNEL__ */
 
 #endif	/* _PC300_H */
-

drivers/net/wan/pc300_drv.c

···
 #include <linux/netdevice.h>
 #include <linux/spinlock.h>
 #include <linux/if.h>
-
-#include <net/syncppp.h>
 #include <net/arp.h>
 
 #include <asm/io.h>
···
 static void tx_dma_buf_check(pc300_t *, int);
 static void rx_dma_buf_check(pc300_t *, int);
 static irqreturn_t cpc_intr(int, void *);
-static int clock_rate_calc(uclong, uclong, int *);
-static uclong detect_ram(pc300_t *);
+static int clock_rate_calc(u32, u32, int *);
+static u32 detect_ram(pc300_t *);
 static void plx_init(pc300_t *);
 static void cpc_trace(struct net_device *, struct sk_buff *, char);
 static int cpc_attach(struct net_device *, unsigned short, unsigned short);
···
 			               + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 
 	for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) {
-		cpc_writel(&ptdescr->next, (uclong) (DMA_TX_BD_BASE +
+		cpc_writel(&ptdescr->next, (u32)(DMA_TX_BD_BASE +
 			(ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t)));
-		cpc_writel(&ptdescr->ptbuf, 
-						(uclong) (DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN));
+		cpc_writel(&ptdescr->ptbuf,
+			   (u32)(DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN));
 	}
 }
 
···
 				       + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t));
 
 	for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) {
-		cpc_writel(&ptdescr->next, (uclong) (DMA_RX_BD_BASE +
-	     	(ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t)));
+		cpc_writel(&ptdescr->next, (u32)(DMA_RX_BD_BASE +
+			(ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t)));
 		cpc_writel(&ptdescr->ptbuf,
-			   (uclong) (DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN));
+			   (u32)(DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN));
 	}
 }
 
···
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int i;
-	ucshort first_bd = card->chan[ch].tx_first_bd;
-	ucshort next_bd = card->chan[ch].tx_next_bd;
+	u16 first_bd = card->chan[ch].tx_first_bd;
+	u16 next_bd = card->chan[ch].tx_next_bd;
 
 	printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch,
 	       first_bd, TX_BD_ADDR(ch, first_bd),
···
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int i;
-	ucshort first_bd = card->chan[ch].tx_first_bd;
-	ucshort next_bd = card->chan[ch].tx_next_bd;
-	uclong scabase = card->hw.scabase;
+	u16 first_bd = card->chan[ch].tx_first_bd;
+	u16 next_bd = card->chan[ch].tx_next_bd;
+	u32 scabase = card->hw.scabase;
 
 	printk ("\nnfree_tx_bd = %d \n", card->chan[ch].nfree_tx_bd);
 	printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch,
···
 	printk("\n");
 }
 #endif
-			 
+
 static void rx_dma_buf_check(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int i;
-	ucshort first_bd = card->chan[ch].rx_first_bd;
-	ucshort last_bd = card->chan[ch].rx_last_bd;
+	u16 first_bd = card->chan[ch].rx_first_bd;
+	u16 last_bd = card->chan[ch].rx_last_bd;
 	int ch_factor;
 
 	ch_factor = ch * N_DMA_RX_BUF;
···
 static int dma_get_rx_frame_size(pc300_t * card, int ch)
 {
 	volatile pcsca_bd_t __iomem *ptdescr;
-	ucshort first_bd = card->chan[ch].rx_first_bd;
+	u16 first_bd = card->chan[ch].rx_first_bd;
 	int rcvd = 0;
-	volatile ucchar status;
+	volatile u8 status;
 
 	ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd));
 	while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
···
  * dma_buf_write: writes a frame to the Tx DMA buffers
  * NOTE: this function writes one frame at a time.
  */
-static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len)
+static int dma_buf_write(pc300_t *card, int ch, u8 *ptdata, int len)
 {
 	int i, nchar;
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int tosend = len;
-	ucchar nbuf = ((len - 1) / BD_DEF_LEN) + 1;
+	u8 nbuf = ((len - 1) / BD_DEF_LEN) + 1;
 
 	if (nbuf >= card->chan[ch].nfree_tx_bd) {
 		return -ENOMEM;
···
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	volatile pcsca_bd_t __iomem *ptdescr;
 	int rcvd = 0;
-	volatile ucchar status;
+	volatile u8 status;
 
 	ptdescr = (card->hw.rambase +
 				  RX_BD_ADDR(ch, chan->rx_first_bd));
···
 static void tx_dma_stop(pc300_t * card, int ch)
 {
 	void __iomem *scabase = card->hw.scabase;
-	ucchar drr_ena_bit = 1 << (5 + 2 * ch);
-	ucchar drr_rst_bit = 1 << (1 + 2 * ch);
+	u8 drr_ena_bit = 1 << (5 + 2 * ch);
+	u8 drr_rst_bit = 1 << (1 + 2 * ch);
 
 	/* Disable DMA */
 	cpc_writeb(scabase + DRR, drr_ena_bit);
···
 static void rx_dma_stop(pc300_t * card, int ch)
 {
 	void __iomem *scabase = card->hw.scabase;
-	ucchar drr_ena_bit = 1 << (4 + 2 * ch);
-	ucchar drr_rst_bit = 1 << (2 * ch);
+	u8 drr_ena_bit = 1 << (4 + 2 * ch);
+	u8 drr_rst_bit = 1 << (2 * ch);
 
 	/* Disable DMA */
 	cpc_writeb(scabase + DRR, drr_ena_bit);
···
 /*************************/
 /***   FALC Routines   ***/
 /*************************/
-static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd)
+static void falc_issue_cmd(pc300_t *card, int ch, u8 cmd)
 {
 	void __iomem *falcbase = card->hw.falcbase;
 	unsigned long i = 0;
···
 static void falc_open_timeslot(pc300_t * card, int ch, int timeslot)
 {
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar tshf = card->chan[ch].falc.offset;
+	u8 tshf = card->chan[ch].falc.offset;
 
 	cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
 		   cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) & 
···
 static void falc_close_timeslot(pc300_t * card, int ch, int timeslot)
 {
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar tshf = card->chan[ch].falc.offset;
+	u8 tshf = card->chan[ch].falc.offset;
 
 	cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch),
 		   cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) | 
···
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
+	u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
 
 	/* Switch to T1 mode (PCM 24) */
 	cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD);
···
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
+	u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0);
 
 	/* Switch to E1 mode (PCM 30) */
 	cpc_writeb(falcbase + F_REG(FMR1, ch),
···
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar dummy;
+	u8 dummy;
 	unsigned long flags;
 
 	memset(pfalc, 0, sizeof(falc_t));
···
 	pc300chconf_t *conf = (pc300chconf_t *) & chan->conf;
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucshort counter;
+	u16 counter;
 
 	counter = cpc_readb(falcbase + F_REG(FECL, ch));
 	counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8;
···
  * Description:	This routine returns the bit error counter value
  *----------------------------------------------------------------------------
  */
-static ucshort falc_pattern_test_error(pc300_t * card, int ch)
+static u16 falc_pattern_test_error(pc300_t * card, int ch)
 {
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
···
 	pc300_t *card = (pc300_t *) chan->card;
 	int ch = chan->channel;
 	unsigned long flags;
-	ucchar ilar;
+	u8 ilar;
 
 	dev->stats.tx_errors++;
 	dev->stats.tx_aborted_errors++;
···
 	int i;
 #endif
 
-	if (chan->conf.monitor) {
-		/* In monitor mode no Tx is done: ignore packet */
-		dev_kfree_skb(skb);
-		return 0;
-	} else if (!netif_carrier_ok(dev)) {
+	if (!netif_carrier_ok(dev)) {
 		/* DCD must be OFF: drop packet */
 		dev_kfree_skb(skb);
 		dev->stats.tx_errors++;
···
 	}
 
 	/* Write buffer to DMA buffers */
-	if (dma_buf_write(card, ch, (ucchar *) skb->data, skb->len) != 0) {
+	if (dma_buf_write(card, ch, (u8 *)skb->data, skb->len) != 0) {
 //		printk("%s: write error. Dropping TX packet.\n", dev->name);
 		netif_stop_queue(dev);
 		dev_kfree_skb(skb);
···
 static void sca_intr(pc300_t * card)
 {
 	void __iomem *scabase = card->hw.scabase;
-	volatile uclong status;
+	volatile u32 status;
 	int ch;
 	int intr_count = 0;
 	unsigned char dsr_rx;
···
 
 	    /**** Reception ****/
 			if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) {
-				ucchar drx_stat = cpc_readb(scabase + DSR_RX(ch));
+				u8 drx_stat = cpc_readb(scabase + DSR_RX(ch));
 
 				/* Clear RX interrupts */
 				cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE);
···
 
 	    /**** Transmission ****/
 			if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) {
-				ucchar dtx_stat = cpc_readb(scabase + DSR_TX(ch));
+				u8 dtx_stat = cpc_readb(scabase + DSR_TX(ch));
 
 				/* Clear TX interrupts */
 				cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE);
···
 
 	    /**** MSCI ****/
 			if (status & IR0_M(IR0_RXINTA, ch)) {
-				ucchar st1 = cpc_readb(scabase + M_REG(ST1, ch));
+				u8 st1 = cpc_readb(scabase + M_REG(ST1, ch));
 
 				/* Clear MSCI interrupts */
 				cpc_writeb(scabase + M_REG(ST1, ch), st1);
···
 	}
 }
 
-static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1)
+static void falc_t1_loop_detection(pc300_t *card, int ch, u8 frs1)
 {
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
···
 	}
 }
 
-static void falc_e1_loop_detection(pc300_t * card, int ch, ucchar rsp)
+static void falc_e1_loop_detection(pc300_t *card, int ch, u8 rsp)
 {
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
···
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar isr0, isr3, gis;
-	ucchar dummy;
+	u8 isr0, isr3, gis;
+	u8 dummy;
 
 	while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
 		if (gis & GIS_ISR0) {
···
 	pc300ch_t *chan = (pc300ch_t *) & card->chan[ch];
 	falc_t *pfalc = (falc_t *) & chan->falc;
 	void __iomem *falcbase = card->hw.falcbase;
-	ucchar isr1, isr2, isr3, gis, rsp;
-	ucchar dummy;
+	u8 isr1, isr2, isr3, gis, rsp;
+	u8 dummy;
 
 	while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) {
 		rsp = cpc_readb(falcbase + F_REG(RSP, ch));
···
 static irqreturn_t cpc_intr(int irq, void *dev_id)
 {
 	pc300_t *card = dev_id;
-	volatile ucchar plx_status;
+	volatile u8 plx_status;
 
 	if (!card) {
 #ifdef PC300_DEBUG_INTR
···
 
 static void cpc_sca_status(pc300_t * card, int ch)
 {
-	ucchar ilar;
+	u8 ilar;
 	void __iomem *scabase = card->hw.scabase;
 	unsigned long flags;
 
···
 	}
 }
 
-static int clock_rate_calc(uclong rate, uclong clock, int *br_io)
+static int clock_rate_calc(u32 rate, u32 clock, int *br_io)
 {
 	int br, tc;
 	int br_pwr, error;
···
 	void __iomem *scabase = card->hw.scabase;
 	void __iomem *plxbase = card->hw.plxbase;
 	int ch = chan->channel;
-	uclong clkrate = chan->conf.phys_settings.clock_rate;
-	uclong clktype = chan->conf.phys_settings.clock_type;
-	ucshort encoding = chan->conf.proto_settings.encoding;
-	ucshort parity = chan->conf.proto_settings.parity;   
-	ucchar md0, md2;
-    
+	u32 clkrate = chan->conf.phys_settings.clock_rate;
+	u32 clktype = chan->conf.phys_settings.clock_type;
+	u16 encoding = chan->conf.proto_settings.encoding;
+	u16 parity = chan->conf.proto_settings.parity;
+	u8 md0, md2;
+
 	/* Reset the channel */
 	cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST);
 
···
 	printk("pc300: cpc_open");
 #endif
 
-#ifdef FIXME
-	if (hdlc->proto.id == IF_PROTO_PPP) {
-		d->if_ptr = &hdlc->state.ppp.pppdev;
-	}
-#endif
-
 	result = hdlc_open(dev);
-	if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) {
-		dev->priv = d;
-	}
-	if (result) {
+
+	if (result)
 		return result;
-	}
 
 	sprintf(ifr.ifr_name, "%s", dev->name);
 	result = cpc_opench(d);
···
 	CPC_UNLOCK(card, flags);
 
 	hdlc_close(dev);
-	if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) {
-		d->if_ptr = NULL;
-	}
+
 #ifdef CONFIG_PC300_MLPPP
 	if (chan->conf.proto == PC300_PROTO_MLPPP) {
 		cpc_tty_unregister_service(d);
···
 	return 0;
 }
 
-static uclong detect_ram(pc300_t * card)
+static u32 detect_ram(pc300_t * card)
 {
-	uclong i;
-	ucchar data;
+	u32 i;
+	u8 data;
 	void __iomem *rambase = card->hw.rambase;
 
 	card->hw.ramsize = PC300_RAMSIZE;
 	/* Let's find out how much RAM is present on this board */
 	for (i = 0; i < card->hw.ramsize; i++) {
-		data = (ucchar) (i & 0xff);
+		data = (u8)(i & 0xff);
 		cpc_writeb(rambase + i, data);
 		if (cpc_readb(rambase + i) != data) {
 			break;
···
 	cpc_writeb(card->hw.scabase + DMER, 0x80);
 
 	if (card->hw.type == PC300_TE) {
-		ucchar reg1;
+		u8 reg1;
 
 		/* Check CPLD version */
 		reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1);
···
 		chan->nfree_tx_bd = N_DMA_TX_BUF;
 
 		d->chan = chan;
-		d->tx_skb = NULL;
 		d->trace_on = 0;
 		d->line_on = 0;
 		d->line_off = 0;
···
 {
 	static int first_time = 1;
 	int err, eeprom_outdated = 0;
-	ucshort device_id;
+	u16 device_id;
 	pc300_t *card;
 
 	if (first_time) {

drivers/net/wan/sealevel.c

···
  *
  *	(c) Copyright 1999, 2001 Alan Cox
  *	(c) Copyright 2001 Red Hat Inc.
+ *	Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <[e-mail]>
  *
  */
 
···
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <net/arp.h>
···
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
-#include <net/syncppp.h>
 #include "z85230.h"
 
 
 struct slvl_device
 {
-	void *if_ptr;	/* General purpose pointer (used by SPPP) */
 	struct z8530_channel *chan;
-	struct ppp_device pppdev;
 	int channel;
 };
 
 
 struct slvl_board
 {
-	struct slvl_device *dev[2];
+	struct slvl_device dev[2];
 	struct z8530_dev board;
 	int iobase;
 };
···
  *	Network driver support routines
  */
 
+static inline struct slvl_device* dev_to_chan(struct net_device *dev)
+{
+	return (struct slvl_device *)dev_to_hdlc(dev)->priv;
+}
+
 /*
- *	Frame receive. Simple for our card as we do sync ppp and there
+ *	Frame receive. Simple for our card as we do HDLC and there
  *	is no funny garbage involved
  */
- 
+
 static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb)
 {
 	/* Drop the CRC - it's not a good idea to try and negotiate it ;) */
-	skb_trim(skb, skb->len-2);
-	skb->protocol=htons(ETH_P_WAN_PPP);
+	skb_trim(skb, skb->len - 2);
+	skb->protocol = hdlc_type_trans(skb, c->netdevice);
 	skb_reset_mac_header(skb);
-	skb->dev=c->netdevice;
-	/*
-	 *	Send it to the PPP layer. We don't have time to process
-	 *	it right now.
-	 */
+	skb->dev = c->netdevice;
 	netif_rx(skb);
 	c->netdevice->last_rx = jiffies;
 }
- 
+
 /*
  *	We've been placed in the UP state
- */ 
- 
+ */
+
 static int sealevel_open(struct net_device *d)
 {
-	struct slvl_device *slvl=d->priv;
+	struct slvl_device *slvl = dev_to_chan(d);
 	int err = -1;
 	int unit = slvl->channel;
-	
+
 	/*
-	 *	Link layer up. 
+	 *	Link layer up.
 	 */
 
-	switch(unit)
+	switch (unit)
 	{
 		case 0:
-			err=z8530_sync_dma_open(d, slvl->chan);
+			err = z8530_sync_dma_open(d, slvl->chan);
 			break;
 		case 1:
-			err=z8530_sync_open(d, slvl->chan);
+			err = z8530_sync_open(d, slvl->chan);
 			break;
 	}
-	
-	if(err)
+
+	if (err)
 		return err;
-	/*
-	 *	Begin PPP
-	 */
-	err=sppp_open(d);
-	if(err)
-	{
-		switch(unit)
-		{
+
+	err = hdlc_open(d);
+	if (err) {
+		switch (unit) {
 			case 0:
 				z8530_sync_dma_close(d, slvl->chan);
 				break;
 			case 1:
 				z8530_sync_close(d, slvl->chan);
 				break;
-		}				
+		}
 		return err;
 	}
-	
-	slvl->chan->rx_function=sealevel_input;
-	
+
+	slvl->chan->rx_function = sealevel_input;
+
 	/*
 	 *	Go go go
 	 */
···
 
 static int sealevel_close(struct net_device *d)
 {
-	struct slvl_device *slvl=d->priv;
+	struct slvl_device *slvl = dev_to_chan(d);
 	int unit = slvl->channel;
-	
+
 	/*
 	 *	Discard new frames
 	 */
-	
-	slvl->chan->rx_function=z8530_null_rx;
-		
-	/*
-	 *	PPP off
-	 */
-	sppp_close(d);
-	/*
-	 *	Link layer down
-	 */
 
+	slvl->chan->rx_function = z8530_null_rx;
+
+	hdlc_close(d);
 	netif_stop_queue(d);
-		
-	switch(unit)
+
+	switch (unit)
 	{
 		case 0:
 			z8530_sync_dma_close(d, slvl->chan);
···
 
 static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 {
-	/* struct slvl_device *slvl=d->priv;
+	/* struct slvl_device *slvl=dev_to_chan(d);
 	   z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */
-	return sppp_do_ioctl(d, ifr,cmd);
-}
-
-static struct net_device_stats *sealevel_get_stats(struct net_device *d)
-{
-	struct slvl_device *slvl=d->priv;
-	if(slvl)
-		return z8530_get_stats(slvl->chan);
-	else
-		return NULL;
+	return hdlc_ioctl(d, ifr, cmd);
 }
 
 /*
- *	Passed PPP frames, fire them downwind.
+ *	Passed network frames, fire them downwind.
  */
- 
+
 static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d)
 {
-	struct slvl_device *slvl=d->priv;
-	return z8530_queue_xmit(slvl->chan, skb);
+	return z8530_queue_xmit(dev_to_chan(d)->chan, skb);
 }
 
-static int sealevel_neigh_setup(struct neighbour *n)
+static int sealevel_attach(struct net_device *dev, unsigned short encoding,
+			   unsigned short parity)
 {
-	if (n->nud_state == NUD_NONE) {
-		n->ops = &arp_broken_ops;
-		n->output = n->ops->output;
+	if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+		return 0;
+	return -EINVAL;
+}
+
+static int slvl_setup(struct slvl_device *sv, int iobase, int irq)
+{
+	struct net_device *dev = alloc_hdlcdev(sv);
+	if (!dev)
+		return -1;
+
+	dev_to_hdlc(dev)->attach = sealevel_attach;
+	dev_to_hdlc(dev)->xmit = sealevel_queue_xmit;
+	dev->open = sealevel_open;
+	dev->stop = sealevel_close;
+	dev->do_ioctl = sealevel_ioctl;
+	dev->base_addr = iobase;
+	dev->irq = irq;
+
+	if (register_hdlc_device(dev)) {
+		printk(KERN_ERR "sealevel: unable to register HDLC device\n");
+		free_netdev(dev);
+		return -1;
 	}
+
+	sv->chan->netdevice = dev;
 	return 0;
-}
-
-static int sealevel_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
-{
-	if (p->tbl->family == AF_INET) {
-		p->neigh_setup = sealevel_neigh_setup;
-		p->ucast_probes = 0;
-		p->mcast_probes = 0;
-	}
-	return 0;
-}
-
-static int sealevel_attach(struct net_device *dev)
-{
-	struct slvl_device *sv = dev->priv;
-	sppp_attach(&sv->pppdev);
-	return 0;
-}
-
-static void sealevel_detach(struct net_device *dev)
-{
-	sppp_detach(dev);
-}
-		
-static void slvl_setup(struct net_device *d)
-{
-	d->open = sealevel_open;
-	d->stop = sealevel_close;
-	d->init = sealevel_attach;
-	d->uninit = sealevel_detach;
-	d->hard_start_xmit = sealevel_queue_xmit;
-	d->get_stats = sealevel_get_stats;
-	d->set_multicast_list = NULL;
-	d->do_ioctl = sealevel_ioctl;
-	d->neigh_setup = sealevel_neigh_setup_dev;
-	d->set_mac_address = NULL;
-
-}
-
-static inline struct slvl_device *slvl_alloc(int iobase, int irq)
-{
-	struct net_device *d;
-	struct slvl_device *sv;
-
-	d = alloc_netdev(sizeof(struct slvl_device), "hdlc%d",
-			 slvl_setup);
-
-	if (!d) 
-		return NULL;
-
-	sv = d->priv;
-	d->ml_priv = sv;
-	sv->if_ptr = &sv->pppdev;
-	sv->pppdev.dev = d;
-	d->base_addr = iobase;
-	d->irq = irq;
-		
-	return sv;
 }
 
 
 /*
  *	Allocate and setup Sealevel board.
  */
- 
-static __init struct slvl_board *slvl_init(int iobase, int irq, 
+
+static __init struct slvl_board *slvl_init(int iobase, int irq,
 					   int txdma, int rxdma, int slow)
 {
 	struct z8530_dev *dev;
 	struct slvl_board *b;
-	
+
 	/*
 	 *	Get the needed I/O space
 	 */
 
-	if(!request_region(iobase, 8, "Sealevel 4021")) 
-	{	
-		printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", iobase);
+	if (!request_region(iobase, 8, "Sealevel 4021")) {
+		printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n",
+		       iobase);
 		return NULL;
 	}
-	
+
 	b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL);
-	if(!b)
-		goto fail3;
+	if (!b)
+		goto err_kzalloc;
 
-	if (!(b->dev[0]= slvl_alloc(iobase, irq)))
-		goto fail2;
+	b->dev[0].chan = &b->board.chanA;
+	b->dev[0].channel = 0;
 
-	b->dev[0]->chan = &b->board.chanA;	
-	b->dev[0]->channel = 0;
-	
-	if (!(b->dev[1] = slvl_alloc(iobase, irq)))
-		goto fail1_0;
-
-	b->dev[1]->chan = &b->board.chanB;
-	b->dev[1]->channel = 1;
+	b->dev[1].chan = &b->board.chanB;
+	b->dev[1].channel = 1;
 
 	dev = &b->board;
-	
+
 	/*
 	 *	Stuff in the I/O addressing
 	 */
-	 
+
 	dev->active = 0;
 
 	b->iobase = iobase;
-	
+
 	/*
 	 *	Select 8530 delays for the old board
 	 */
-	 
-	if(slow)
+
+	if (slow)
 		iobase |= Z8530_PORT_SLEEP;
-		
-	dev->chanA.ctrlio=iobase+1;
-	dev->chanA.dataio=iobase;
-	dev->chanB.ctrlio=iobase+3;
-	dev->chanB.dataio=iobase+2;
-	
-	dev->chanA.irqs=&z8530_nop;
-	dev->chanB.irqs=&z8530_nop;
-	
+
+	dev->chanA.ctrlio = iobase + 1;
+	dev->chanA.dataio = iobase;
+	dev->chanB.ctrlio = iobase + 3;
+	dev->chanB.dataio = iobase + 2;
+
+	dev->chanA.irqs = &z8530_nop;
+	dev->chanB.irqs = &z8530_nop;
+
 	/*
 	 *	Assert DTR enable DMA
 	 */
-	 
-	outb(3|(1<<7), b->iobase+4);	
-	
+
+	outb(3 | (1 << 7), b->iobase + 4);
+
 
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
 	   IRQ ;) - This is one driver RtLinux is made for */
-   
-	if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev)<0)
-	{
-		printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
-		goto fail1_1;
-	}
-	
-	dev->irq=irq;
-	dev->chanA.private=&b->dev[0];
-	dev->chanB.private=&b->dev[1];
-	dev->chanA.netdevice=b->dev[0]->pppdev.dev;
-	dev->chanB.netdevice=b->dev[1]->pppdev.dev;
-	dev->chanA.dev=dev;
-	dev->chanB.dev=dev;
 
-	dev->chanA.txdma=3;
-	dev->chanA.rxdma=1;
-	if(request_dma(dev->chanA.txdma, "SeaLevel (TX)")!=0)
-		goto fail;
-		
-	if(request_dma(dev->chanA.rxdma, "SeaLevel (RX)")!=0)
-		goto dmafail;
-	
+	if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED,
+			"SeaLevel", dev) < 0) {
+		printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
+		goto err_request_irq;
+	}
+
+	dev->irq = irq;
+	dev->chanA.private = &b->dev[0];
+	dev->chanB.private = &b->dev[1];
+	dev->chanA.dev = dev;
+	dev->chanB.dev = dev;
+
+	dev->chanA.txdma = 3;
+	dev->chanA.rxdma = 1;
+	if (request_dma(dev->chanA.txdma, "SeaLevel (TX)"))
+		goto err_dma_tx;
+
+	if (request_dma(dev->chanA.rxdma, "SeaLevel (RX)"))
+		goto err_dma_rx;
+
 	disable_irq(irq);
-		
+
 	/*
 	 *	Begin normal initialise
 	 */
-	 
-	if(z8530_init(dev)!=0)
-	{
+
+	if (z8530_init(dev) != 0) {
 		printk(KERN_ERR "Z8530 series device not found.\n");
 		enable_irq(irq);
-		goto dmafail2;
+		goto free_hw;
 	}
-	if(dev->type==Z85C30)
-	{
+	if (dev->type == Z85C30) {
 		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream);
 		z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream);
-	}
-	else
-	{
+	} else {
 		z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230);
 		z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230);
 	}
···
 	/*
 	 *	Now we can take the IRQ
 	 */
-	
+
 	enable_irq(irq);
 
-	if (register_netdev(b->dev[0]->pppdev.dev)) 
-		goto dmafail2;
-		
-	if (register_netdev(b->dev[1]->pppdev.dev)) 
-		goto fail_unit;
+	if (slvl_setup(&b->dev[0], iobase, irq))
+		goto free_hw;
+	if (slvl_setup(&b->dev[1], iobase, irq))
+		goto free_netdev0;
 
 	z8530_describe(dev, "I/O", iobase);
-	dev->active=1;
+	dev->active = 1;
 	return b;
 
-fail_unit:
-	unregister_netdev(b->dev[0]->pppdev.dev);
-	
-dmafail2:
+free_netdev0:
+	unregister_hdlc_device(b->dev[0].chan->netdevice);
+	free_netdev(b->dev[0].chan->netdevice);
+free_hw:
 	free_dma(dev->chanA.rxdma);
-dmafail:
+err_dma_rx:
 	free_dma(dev->chanA.txdma);
-fail:
+err_dma_tx:
 	free_irq(irq, dev);
-fail1_1:
-	free_netdev(b->dev[1]->pppdev.dev);
-fail1_0:
-	free_netdev(b->dev[0]->pppdev.dev);
-fail2:
+err_request_irq:
 	kfree(b);
-fail3:
-	release_region(iobase,8);
+err_kzalloc:
+	release_region(iobase, 8);
 	return NULL;
 }
 
···
 	int u;
 
 	z8530_shutdown(&b->board);
-	
-	for(u=0; u<2; u++)
+
+	for (u = 0; u < 2; u++)
 	{
-		struct net_device *d = b->dev[u]->pppdev.dev;
-		unregister_netdev(d);
+		struct net_device *d = b->dev[u].chan->netdevice;
+		unregister_hdlc_device(d);
 		free_netdev(d);
 	}
-	
+
 	free_irq(b->board.irq, &b->board);
 	free_dma(b->board.chanA.rxdma);
 	free_dma(b->board.chanA.txdma);
···
 
 static int __init slvl_init_module(void)
 {
-#ifdef MODULE
-	printk(KERN_INFO "SeaLevel Z85230 Synchronous Driver v 0.02.\n");
-	printk(KERN_INFO "(c) Copyright 1998, Building Number Three Ltd.\n");
-#endif
 	slvl_unit = slvl_init(io, irq, txdma, rxdma, slow);
 
 	return slvl_unit ? 0 : -ENODEV;

drivers/net/wan/syncppp.c

···
 	skb->dev=dev;
 	skb_reset_mac_header(skb);
 
-	if (dev->flags & IFF_RUNNING)
-	{
-		/* Count received bytes, add FCS and one flag */
-		sp->ibytes+= skb->len + 3;
-		sp->ipkts++;
-	}
-
 	if (!pskb_may_pull(skb, PPP_HEADER_LEN)) {
 		/* Too small packet, drop it. */
 		if (sp->pp_flags & PP_DEBUG)
···
 			sppp_print_bytes ((u8*) (lh+1), len);
 		printk (">\n");
 	}
-	sp->obytes += skb->len;
 	/* Control is high priority so it doesn't get queued behind data */
 	skb->priority=TC_PRIO_CONTROL;
 	skb->dev = dev;
···
 		printk (KERN_WARNING "%s: cisco output: <%xh %xh %xh %xh %xh-%xh>\n",
 			dev->name,  ntohl (ch->type), ch->par1,
 			ch->par2, ch->rel, ch->time0, ch->time1);
-	sp->obytes += skb->len;
 	skb->priority=TC_PRIO_CONTROL;
 	skb->dev = dev;
 	skb_queue_tail(&tx_queue, skb);

drivers/net/wan/z85230.c

···
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/delay.h>
+#include <linux/hdlc.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <asm/dma.h>
···
 #define RT_UNLOCK
 #include <linux/spinlock.h>
 
-#include <net/syncppp.h>
 #include "z85230.h"
 
 
···
  *	A status event occurred in PIO synchronous mode. There are several
  *	reasons the chip will bother us here. A transmit underrun means we
  *	failed to feed the chip fast enough and just broke a packet. A DCD
- *	change is a line up or down. We communicate that back to the protocol
- *	layer for synchronous PPP to renegotiate.
+ *	change is a line up or down.
  */
 
 static void z8530_status(struct z8530_channel *chan)
 {
 	u8 status, altered;
 
-	status=read_zsreg(chan, R0);
-	altered=chan->status^status;
-	
-	chan->status=status;
-	
-	if(status&TxEOM)
-	{
+	status = read_zsreg(chan, R0);
+	altered = chan->status ^ status;
+
+	chan->status = status;
+
+	if (status & TxEOM) {
 /*		printk("%s: Tx underrun.\n", chan->dev->name); */
-		chan->stats.tx_fifo_errors++;
+		chan->netdevice->stats.tx_fifo_errors++;
 		write_zsctrl(chan, ERR_RES);
 		z8530_tx_done(chan);
 	}
-		
-	if(altered&chan->dcdcheck)
+
+	if (altered & chan->dcdcheck)
 	{
-		if(status&chan->dcdcheck)
-		{
+		if (status & chan->dcdcheck) {
 			printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]|RxENABLE);
-			if(chan->netdevice &&
-			    ((chan->netdevice->type == ARPHRD_HDLC) ||
-			    (chan->netdevice->type == ARPHRD_PPP)))
-				sppp_reopen(chan->netdevice);
-		}
-		else
-		{
+			write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
+			if (chan->netdevice)
+				netif_carrier_on(chan->netdevice);
+		} else {
 			printk(KERN_INFO "%s: DCD lost\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]&~RxENABLE);
+			write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
 			z8530_flush_fifo(chan);
+			if (chan->netdevice)
+				netif_carrier_off(chan->netdevice);
 		}
-		
-	}	
+
+	}
 	write_zsctrl(chan, RES_EXT_INT);
 	write_zsctrl(chan, RES_H_IUS);
 }
 
-struct z8530_irqhandler z8530_sync=
+struct z8530_irqhandler z8530_sync =
 {
 	z8530_rx,
 	z8530_tx,
···
  *	
  *	A status event occurred on the Z8530. We receive these for two reasons
  *	when in DMA mode. Firstly if we finished a packet transfer we get one
- *	and kick the next packet out. Secondly we may see a DCD change and
- *	have to poke the protocol layer.
+ *	and kick the next packet out. Secondly we may see a DCD change.
  *
  */
  
···
 		}
 	}
 
-	if(altered&chan->dcdcheck)
+	if (altered & chan->dcdcheck)
 	{
-		if(status&chan->dcdcheck)
-		{
+		if (status & chan->dcdcheck) {
 			printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]|RxENABLE);
-			if(chan->netdevice &&
-			    ((chan->netdevice->type == ARPHRD_HDLC) ||
-			    (chan->netdevice->type == ARPHRD_PPP)))
-				sppp_reopen(chan->netdevice);
-		}
-		else
-		{
+			write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
+			if (chan->netdevice)
+				netif_carrier_on(chan->netdevice);
+		} else {
 			printk(KERN_INFO "%s:DCD lost\n", chan->dev->name);
-			write_zsreg(chan, R3, chan->regs[3]&~RxENABLE);
+			write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
 			z8530_flush_fifo(chan);
+			if (chan->netdevice)
+				netif_carrier_off(chan->netdevice);
 		}
-	}	
+	}
 
 	write_zsctrl(chan, RES_EXT_INT);
 	write_zsctrl(chan, RES_H_IUS);
···
 			/*
 			 *	Check if we crapped out.
 			 */
-			if(get_dma_residue(c->txdma))
+			if (get_dma_residue(c->txdma))
 			{
-				c->stats.tx_dropped++;
-				c->stats.tx_fifo_errors++;
+				c->netdevice->stats.tx_dropped++;
+				c->netdevice->stats.tx_fifo_errors++;
 			}
 			release_dma_lock(flags);
 		}
···
  *	packet. This code is fairly timing sensitive.
  *
  *	Called with the register lock held.
- */ 
- 
+ */
+
 static void z8530_tx_done(struct z8530_channel *c)
 {
 	struct sk_buff *skb;
 
 	/* Actually this can happen.*/
-	if(c->tx_skb==NULL)
+	if (c->tx_skb == NULL)
 		return;
 
-	skb=c->tx_skb;
-	c->tx_skb=NULL;
+	skb = c->tx_skb;
+	c->tx_skb = NULL;
 	z8530_tx_begin(c);
-	c->stats.tx_packets++;
-	c->stats.tx_bytes+=skb->len;
+	c->netdevice->stats.tx_packets++;
+	c->netdevice->stats.tx_bytes += skb->len;
 	dev_kfree_skb_irq(skb);
 }
 
···
  *	@skb: The buffer
  *
  *	We point the receive handler at this function when idle. Instead
- *	of syncppp processing the frames we get to throw them away.
+ *	of processing the frames we get to throw them away.
  */
  
 void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb)
···
 		else
 			/* Can't occur as we dont reenable the DMA irq until
 			   after the flip is done */
-			printk(KERN_WARNING "%s: DMA flip overrun!\n", c->netdevice->name);
-			
+			printk(KERN_WARNING "%s: DMA flip overrun!\n",
+			       c->netdevice->name);
+
 		release_dma_lock(flags);
-		
+
 		/*
 		 *	Shove the old buffer into an sk_buff. We can't DMA
 		 *	directly into one on a PC - it might be above the 16Mb
···
 		 *	can avoid the copy. Optimisation 2 - make the memcpy
 		 *	a copychecksum.
 		 */
-		 
-		skb=dev_alloc_skb(ct);
-		if(skb==NULL)
-		{
-			c->stats.rx_dropped++;
-			printk(KERN_WARNING "%s: Memory squeeze.\n", c->netdevice->name);
-		}
-		else
-		{
+
+		skb = dev_alloc_skb(ct);
+		if (skb == NULL) {
+			c->netdevice->stats.rx_dropped++;
+			printk(KERN_WARNING "%s: Memory squeeze.\n",
+			       c->netdevice->name);
+		} else {
 			skb_put(skb, ct);
 			skb_copy_to_linear_data(skb, rxb, ct);
-			c->stats.rx_packets++;
-			c->stats.rx_bytes+=ct;
+			c->netdevice->stats.rx_packets++;
+			c->netdevice->stats.rx_bytes += ct;
 		}
-		c->dma_ready=1;
-	}
-	else
-	{
-		RT_LOCK;	
-		skb=c->skb;
-		
+		c->dma_ready = 1;
+	} else {
+		RT_LOCK;
+		skb = c->skb;
+
 		/*
 		 *	The game we play for non DMA is similar. We want to
 		 *	get the controller set up for the next packet as fast
···
 		 *	if you build a system where the sync irq isnt blocked
 		 *	by the kernel IRQ disable then you need only block the
 		 *	sync IRQ for the RT_LOCK area.
-		 *	
+		 *
 		 */
 		ct=c->count;
-		
+
 		c->skb = c->skb2;
 		c->count = 0;
 		c->max = c->mtu;
-		if(c->skb)
-		{
+		if (c->skb) {
 			c->dptr = c->skb->data;
 			c->max = c->mtu;
-		}
-		else
-		{
-			c->count= 0;
+		} else {
+			c->count = 0;
 			c->max = 0;
 		}
 		RT_UNLOCK;
 
 		c->skb2 = dev_alloc_skb(c->mtu);
-		if(c->skb2==NULL)
+		if (c->skb2 == NULL)
 			printk(KERN_WARNING "%s: memory squeeze.\n",
-				c->netdevice->name);
+			       c->netdevice->name);
 		else
-		{
-			skb_put(c->skb2,c->mtu);
-		}
-		c->stats.rx_packets++;
-		c->stats.rx_bytes+=ct;
-		
+			skb_put(c->skb2, c->mtu);
+		c->netdevice->stats.rx_packets++;
+		c->netdevice->stats.rx_bytes += ct;
 	}
 	/*
 	 *	If we received a frame we must now process it.
 	 */
-	if(skb)
-	{
+	if (skb) {
 		skb_trim(skb, ct);
-		c->rx_function(c,skb);
-	}
-	else
-	{
-		c->stats.rx_dropped++;
+		c->rx_function(c, skb);
+	} else {
+		c->netdevice->stats.rx_dropped++;
 		printk(KERN_ERR "%s: Lost a frame\n", c->netdevice->name);
 	}
 }
···
  *	Returns true if the buffer cross a DMA boundary on a PC. The poor
  *	thing can only DMA within a 64K block not across the edges of it.
  */
- 
+
 static inline int spans_boundary(struct sk_buff *skb)
 {
 	unsigned long a=(unsigned long)skb->data;
···
 }
 
 EXPORT_SYMBOL(z8530_queue_xmit);
-
-/**
- *	z8530_get_stats - Get network statistics
- *	@c: The channel to use
- *
- *	Get the statistics block. We keep the statistics in software as
- *	the chip doesn't do it for us.
- *
- *	Locking is ignored here - we could lock for a copy but its
- *	not likely to be that big an issue
- */
- 
-struct net_device_stats *z8530_get_stats(struct z8530_channel *c)
-{
-	return &c->stats;
-}
-
-EXPORT_SYMBOL(z8530_get_stats);
 
 /*
  *	Module support

drivers/net/wan/z85230.h

···
 
 	void		*private;	/* For our owner */
 	struct net_device	*netdevice;	/* Network layer device */
-	struct net_device_stats stats;	/* Network layer statistics */
 
 	/*
 	 *	Async features
···
 	unsigned char		tx_active; /* character is being xmitted */
 	unsigned char		tx_stopped; /* output is suspended */
 
-	spinlock_t		*lock;	  /* Devicr lock */
-};	
+	spinlock_t		*lock;	  /* Device lock */
+};
 
 /*
  *	Each Z853x0 device.
- */	
- 
+ */
+
 struct z8530_dev
 {
 	char *name;	/* Device instance name */
···
 extern int z8530_sync_txdma_close(struct net_device *, struct z8530_channel *);
 extern int z8530_channel_load(struct z8530_channel *, u8 *);
 extern int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb);
-extern struct net_device_stats *z8530_get_stats(struct z8530_channel *c);
 extern void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb);
 
 

drivers/net/wireless/orinoco.c

···
 		else
 			priv->mc_count = mc_count;
 	}
-
-	/* Since we can set the promiscuous flag when it wasn't asked
-	   for, make sure the net_device knows about it. */
-	if (priv->promiscuous)
-		dev->flags |= IFF_PROMISC;
-	else
-		dev->flags &= ~IFF_PROMISC;
 }
 
 /* This must be called from user context, without locks held - use

drivers/net/wireless/wavelan.c

···
 			lp->mc_count = 0;
 
 			wv_82586_reconfig(dev);
-
-			/* Tell the kernel that we are doing a really bad job. */
-			dev->flags |= IFF_PROMISC;
 		}
 	} else
 		/* Are there multicast addresses to send? */

drivers/net/wireless/wavelan_cs.c

···
 	  lp->mc_count = 0;
 
 	  wv_82593_reconfig(dev);
-
-	  /* Tell the kernel that we are doing a really bad job... */
-	  dev->flags |= IFF_PROMISC;
 	}
     }
   else
···
 	    lp->mc_count = 0;
 
 	    wv_82593_reconfig(dev);
-
-	    /* Tell the kernel that we are doing a really bad job... */
-	    dev->flags |= IFF_ALLMULTI;
 	  }
       }
     else

drivers/net/xen-netfront.c

···
 	}
 	spin_unlock_bh(&np->rx_lock);
 
-	xennet_maybe_wake_tx(dev);
+	netif_start_queue(dev);
 
 	return 0;
 }

include/linux/dm9000.h

···
 
 struct dm9000_plat_data {
 	unsigned int	flags;
+	unsigned char	dev_addr[6];
 
 	/* allow replacement IO routines */
 

include/linux/ethtool.h

···
 	__u8	autoneg;	/* Enable or disable autonegotiation */
 	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
 	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u32	reserved[4];
+	__u16	speed_hi;
+	__u16	reserved2;
+	__u32	reserved[3];
 };
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+						__u32 speed)
+{
+
+	ep->speed = (__u16)speed;
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
 
 #define ETHTOOL_BUSINFO_LEN	32
 /* these strings are set to whatever the driver author decides... */

include/net/syncppp.h

···
 	u32		pp_rseq;	/* remote sequence number */
 	struct slcp	lcp;		/* LCP params */
 	struct sipcp	ipcp;		/* IPCP params */
-	u32		ibytes,obytes;	/* Bytes in/out */
-	u32		ipkts,opkts;	/* Packets in/out */
 	struct timer_list	pp_timer;
 	struct net_device	*pp_if;
 	char		pp_link_state;	/* Link status */

net/core/dev.c

···
 
 EXPORT_SYMBOL(netif_rx_ni);
 
-static inline struct net_device *skb_bond(struct sk_buff *skb)
-{
-	struct net_device *dev = skb->dev;
-
-	if (dev->master) {
-		if (skb_bond_should_drop(skb)) {
-			kfree_skb(skb);
-			return NULL;
-		}
-		skb->dev = dev->master;
-	}
-
-	return dev;
-}
-
-
 static void net_tx_action(struct softirq_action *h)
 {
 	struct softnet_data *sd = &__get_cpu_var(softnet_data);
···
 {
 	struct packet_type *ptype, *pt_prev;
 	struct net_device *orig_dev;
+	struct net_device *null_or_orig;
 	int ret = NET_RX_DROP;
 	__be16 type;
 
···
 	if (!skb->iif)
 		skb->iif = skb->dev->ifindex;
 
-	orig_dev = skb_bond(skb);
-
-	if (!orig_dev)
-		return NET_RX_DROP;
+	null_or_orig = NULL;
+	orig_dev = skb->dev;
+	if (orig_dev->master) {
+		if (skb_bond_should_drop(skb))
+			null_or_orig = orig_dev; /* deliver only exact match */
+		else
+			skb->dev = orig_dev->master;
+	}
 
 	__get_cpu_var(netdev_rx_stat).total++;
 
···
 #endif
 
 	list_for_each_entry_rcu(ptype, &ptype_all, list) {
-		if (!ptype->dev || ptype->dev == skb->dev) {
+		if (ptype->dev == null_or_orig || ptype->dev == skb->dev ||
+		    ptype->dev == orig_dev) {
 			if (pt_prev)
 				ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = ptype;
···
 	list_for_each_entry_rcu(ptype,
 			&ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) {
 		if (ptype->type == type &&
-		    (!ptype->dev || ptype->dev == skb->dev)) {
+		    (ptype->dev == null_or_orig || ptype->dev == skb->dev ||
+		     ptype->dev == orig_dev)) {
 			if (pt_prev)
 				ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = ptype;

net/wanrouter/wanmain.c

···
 #include <linux/vmalloc.h>	/* vmalloc, vfree */
 #include <asm/uaccess.h>        /* copy_to/from_user */
 #include <linux/init.h>         /* __initfunc et al. */
-#include <net/syncppp.h>
 
 #define KMEM_SAFETYZONE 8
 
···
 {
 	wanif_conf_t *cnf;
 	struct net_device *dev = NULL;
-#ifdef CONFIG_WANPIPE_MULTPPP
-	struct ppp_device *pppdev=NULL;
-#endif
 	int err;
 
 	if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL))
···
 		goto out;
 
 	if (cnf->config_id == WANCONFIG_MPPP) {
-#ifdef CONFIG_WANPIPE_MULTPPP
-		pppdev = kzalloc(sizeof(struct ppp_device), GFP_KERNEL);
-		err = -ENOBUFS;
-		if (pppdev == NULL)
-			goto out;
-		pppdev->dev = kzalloc(sizeof(struct net_device), GFP_KERNEL);
-		if (pppdev->dev == NULL) {
-			kfree(pppdev);
-			err = -ENOBUFS;
-			goto out;
-		}
-		err = wandev->new_if(wandev, (struct net_device *)pppdev, cnf);
-		dev = pppdev->dev;
-#else
 		printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n",
 				wandev->name);
 		err = -EPROTONOSUPPORT;
 		goto out;
-#endif
 	} else {
 		dev = kzalloc(sizeof(struct net_device), GFP_KERNEL);
 		err = -ENOBUFS;
···
 	kfree(dev->priv);
 	dev->priv = NULL;
 
-#ifdef CONFIG_WANPIPE_MULTPPP
-	if (cnf->config_id == WANCONFIG_MPPP)
-		kfree(pppdev);
-	else
-		kfree(dev);
-#else
 	/* Sync PPP is disabled */
 	if (cnf->config_id != WANCONFIG_MPPP)
 		kfree(dev);
-#endif
-
 out:
 	kfree(cnf);
 	return err;