drm/amd/display: Change the delay time before enabling FEC

[why]
DP spec requires 1000 symbols delay between the end of link training
and enabling FEC in the stream. Currently we are using 1 miliseconds
delay which is not accurate.

[how]
One lane RBR should have the maximum time for transmitting 1000 LL
codes which is 6.173 us. So using 7 microseconds delay instead of
1 miliseconds.

Signed-off-by: Leo (Hanghong) Ma <[e-mail]>
Reviewed-by: Harry Wentland <[e-mail]>
Reviewed-by: Nikola Cornij <[e-mail]>
Acked-by: Leo Li <[e-mail]>
Signed-off-by: Alex Deucher <[e-mail]>

drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c

···
 	if (link_enc->funcs->fec_set_enable &&
 			link->dpcd_caps.fec_cap.bits.FEC_CAPABLE) {
 		if (link->fec_state == dc_link_fec_ready && enable) {
-			msleep(1);
+			/* Accord to DP spec, FEC enable sequence can first
+			 * be transmitted anytime after 1000 LL codes have
+			 * been transmitted on the link after link training
+			 * completion. Using 1 lane RBR should have the maximum
+			 * time for transmitting 1000 LL codes which is 6.173 us.
+			 * So use 7 microseconds delay instead.
+			 */
+			udelay(7);
 			link_enc->funcs->fec_set_enable(link_enc, true);
 			link->fec_state = dc_link_fec_enabled;
 		} else if (link->fec_state == dc_link_fec_enabled && !enable) {