Merge tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree update for 4.19:
- Add device tree support for i.MX6SLL SoC.
- New board support: ConnectCore 6UL System-On-Module and SBC Express;
ZII SCU2 Mezz, SCU3 ESB, SSMB SPU3 and CFU1 board; i.MX6SLL EVK
board; Engicam i.CoreM6 1.5 Quad/Dual MIPI; LogicPD MX31Lite board;
i.MX53 HSC/DDC boards from K+P.
- Remove fake regulator bus container node and enable USB OTG support
for i.MX6 wandboard and riotboard.
- Populate RAVE SP EEPROM, backlight, power button and watchdog devices
for ZII boards.
- Add cooling-cells for cpufreq cooling device, and add OPP properties
for all CPUs.
- A series from Anson Huang to enable LCD panel and backlight support
for imx6sll-evk board.
- Make pfuze100 sw4 regulator always-on for for a few Freescale/NXP
development boards, because the regulator is critical there and
cannot be turned off.
- Add more device support for i.MX5: AIPSTZ, SAHARA Crypto, M4IF,
Tigerp, PMU, CodaHx4 VPU.
- Enable PMU secure-reg-access for imx51-babbage, imx51-zii-rdu1 and
imx53-ppd board.
- Switch more device tree license to use SPDX identifier.
- Switch to use OF graph to describe the display for imx7d-nitrogen7.
- Add chosen/stdout-path for more boards, so that earlycon can be
enabled more easily on kernel cmdline.
- Convert GPC to new device tree bindings and add Vivante gpu nodes
for i.MX6SL SoC.
- Add more device support for imx6dl-mamoj board: parallel display,
WiFi and USB.
- A series from Stefan Agner to update i.MX6 apalis/colibri boards on
various aspects: SD/MMC card detection, regulators, etc.

* tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (96 commits)
ARM: dts: imx7d: remove "operating-points" property for cpu1
ARM: dts: vf610-zii-ssmb-spu3: Fix W=1 level warnings
ARM: dts: vf610: Add ZII CFU1 board
ARM: dts: imx6dl-mamoj: Add usb host and device support
ARM: dts: imx6dl-mamoj: Add Wifi support
ARM: dts: imx6dl-mamoj: Add parallel display support
ARM: dts: vf610: Add ZII SSMB SPU3 board
ARM: dts: imx6ul-pico-hobbit: Do not hardcode the memory size
ARM: dts: imx6sl-evk: make pfuze100 sw4 always on
ARM: dts: imx6sll-evk: make pfuze100 sw4 always on
ARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on
ARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on
ARM: dts: imx6sl-evk: add missing GPIO iomux setting
ARM: dts: imx51-zii-scu3-esb: Fix RAVE SP watchdog compatible string
ARM: dts: imx51-zii-scu3-esb: Add switch IRQ line pinumx config
ARM: dts: imx6sx-nitrogen6sx: remove obsolete display configuration
ARM: dts: imx7d-nitrogen7: use OF graph to describe the display
ARM: dts: imx: Switch Boundary Devices boards to SPDX identifier
ARM: dts: imx6sl: Add vivante gpu nodes
ARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel
...

Signed-off-by: Olof Johansson <[e-mail]>

Documentation/devicetree/bindings/arm/freescale/m4if.txt

···
+* Freescale Multi Master Multi Memory Interface (M4IF) module
+
+Required properties:
+- compatible : Should be "fsl,imx51-m4if"
+- reg : Address and length of the register set for the device
+
+Example:
+
+m4if: m4if@83fd8000 {
+	compatible = "fsl,imx51-m4if";
+	reg = <0x83fd8000 0x1000>;
+};

Documentation/devicetree/bindings/arm/freescale/tigerp.txt

···
+* Freescale Tigerp platform module
+
+Required properties:
+- compatible : Should be "fsl,imx51-tigerp"
+- reg : Address and length of the register set for the device
+
+Example:
+
+tigerp: tigerp@83fa0000 {
+	compatible = "fsl,imx51-tigerp";
+	reg = <0x83fa0000 0x28>;
+};

Documentation/devicetree/bindings/arm/fsl.txt

···
 Required root node properties:
     - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
 
+i.MX6SLL EVK board
+Required root node properties:
+    - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
 Generic i.MX boards
 -------------------
 

arch/arm/boot/dts/Makefile

···
 	imx27-phytec-phycore-rdk.dtb \
 	imx27-phytec-phycard-s-rdk.dtb
 dtb-$(CONFIG_SOC_IMX31) += \
-	imx31-bug.dtb
+	imx31-bug.dtb \
+	imx31-lite.dtb
 dtb-$(CONFIG_SOC_IMX35) += \
 	imx35-eukrea-mbimxsd35-baseboard.dtb \
 	imx35-pdk.dtb
···
 	imx51-digi-connectcore-jsk.dtb \
 	imx51-eukrea-mbimxsd51-baseboard.dtb \
 	imx51-ts4800.dtb \
-	imx51-zii-rdu1.dtb
+	imx51-zii-rdu1.dtb \
+	imx51-zii-scu2-mezz.dtb \
+	imx51-zii-scu3-esb.dtb
 dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-ard.dtb \
 	imx53-cx9020.dtb \
+	imx53-kp-ddc.dtb \
+	imx53-kp-hsc.dtb \
 	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
 	imx53-ppd.dtb \
···
 	imx6dl-hummingboard2-emmc-som-v15.dtb \
 	imx6dl-hummingboard2-som-v15.dtb \
 	imx6dl-icore.dtb \
+	imx6dl-icore-mipi.dtb \
 	imx6dl-icore-rqs.dtb \
 	imx6dl-mamoj.dtb \
 	imx6dl-nit6xlite.dtb \
···
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
 	imx6sl-warp.dtb
+dtb-$(CONFIG_SOC_IMX6SLL) += \
+	imx6sll-evk.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-nitrogen6sx.dtb \
 	imx6sx-sabreauto.dtb \
···
 	imx6sx-udoo-neo-full.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-14x14-evk.dtb \
+	imx6ul-ccimx6ulsbcexpress.dtb \
 	imx6ul-geam.dtb \
 	imx6ul-isiot-emmc.dtb \
 	imx6ul-isiot-nand.dtb \
···
 	vf610-cosmic.dtb \
 	vf610m4-cosmic.dtb \
 	vf610-twr.dtb \
+	vf610-zii-cfu1.dtb \
 	vf610-zii-dev-rev-b.dtb \
-	vf610-zii-dev-rev-c.dtb
+	vf610-zii-dev-rev-c.dtb \
+	vf610-zii-ssmb-spu3.dtb
 dtb-$(CONFIG_ARCH_MXS) += \
 	imx23-evk.dtb \
 	imx23-olinuxino.dtb \

arch/arm/boot/dts/imx31-lite.dts

···
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2016-2018 Vladimir Zapolskiy <[e-mail]>
+
+/dts-v1/;
+
+#include "imx31.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LogicPD i.MX31 Lite";
+	compatible = "logicpd,imx31-lite", "fsl,imx31";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x8000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ata {
+	status = "okay";
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13783";
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1a {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw1b {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2a {		/* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2b {		/* NVCC10 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo {		/* NVCC1 and NVCC7 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi {		/* VIOHI */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio {	/* VAUDIO */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vcam {		/* NVCC4 */
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vgen {		/* NVCC5 / NVCC8 and NVCC6 / NVCC9 */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc2 {		/* NVCC3 */
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart2 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart3 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x0 0x200000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>;
+	};
+
+	ethernet@4,0 {
+		compatible = "smsc,lan9117", "smsc,lan9115";
+		reg = <4 0x0 0x100>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>;
+	};
+};

arch/arm/boot/dts/imx31.dtsi

···
 // SPDX-License-Identifier: GPL-2.0+
 //
+// Copyright 2016-2018 Vladimir Zapolskiy <[e-mail]>
 // Copyright 2012 Denis 'GNUtoo' Carikli <[e-mail]>
 
 / {
···
 	memory { device_type = "memory"; };
 
 	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
 	};
 
 	cpus {
···
 		interrupt-parent = <&avic>;
 		ranges;
 
+		iram: iram@1fffc000 {
+			compatible = "mmio-sram";
+			reg = <0x1fffc000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1fffc000 0x4000>;
+		};
+
 		aips@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x43f00000 0x100000>;
 			ranges;
+
+			i2c1: i2c@43f80000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				interrupts = <10>;
+				clocks = <&clks 33>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				interrupts = <3>;
+				clocks = <&clks 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ata: ata@43f8c000 {
+				compatible = "fsl,imx31-pata", "fsl,imx27-pata";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <15>;
+				clocks = <&clks 26>;
+				status = "disabled";
+			};
 
 			uart1: serial@43f90000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
···
 				interrupts = <32>;
 				clocks = <&clks 10>, <&clks 31>;
 				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				interrupts = <4>;
+				clocks = <&clks 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@43fa4000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x43fa4000 0x4000>;
+				interrupts = <14>;
+				clocks = <&clks 10>, <&clks 53>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 8 8 0>, <&sdma 9 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
···
 			reg = <0x50000000 0x100000>;
 			ranges;
 
+			sdhci1: sdhci@50004000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50004000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 10>, <&clks 20>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 20 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			sdhci2: sdhci@50008000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50008000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 10>, <&clks 21>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 21 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
 			uart3: serial@5000c000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x5000c000 0x4000>;
 				interrupts = <18>;
 				clocks = <&clks 10>, <&clks 48>;
 				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			spi2: cspi@50010000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 10>, <&clks 54>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 6 8 0>, <&sdma 7 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
···
 				#clock-cells = <1>;
 			};
 
+			spi3: cspi@53f84000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <17>;
+				clocks = <&clks 10>, <&clks 28>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 10 8 0>, <&sdma 11 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			gpt: timer@53f90000 {
 				compatible = "fsl,imx31-gpt";
 				reg = <0x53f90000 0x4000>;
 				interrupts = <29>;
 				clocks = <&clks 10>, <&clks 22>;
 				clock-names = "ipg", "per";
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rng@53fb0000 {
+				compatible = "fsl,imx31-rnga";
+				reg = <0x53fb0000 0x4000>;
+				interrupts = <22>;
+				clocks = <&clks 29>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: sdma@53fd4000 {
+				compatible = "fsl,imx31-sdma";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <34>;
+				clocks = <&clks 10>, <&clks 27>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin";
+			};
+
+			rtc: rtc@53fd8000 {
+				compatible = "fsl,imx31-rtc", "fsl,imx21-rtc";
+				reg = <0x53fd8000 0x4000>;
+				interrupts = <25>;
+				clocks = <&clks 2>, <&clks 40>;
+				clock-names = "ref", "ipg";
+			};
+
+			wdog: wdog@53fdc000 {
+				compatible = "fsl,imx31-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 41>;
+			};
+
+			pwm: pwm@53fe0000 {
+				compatible = "fsl,imx31-pwm", "fsl,imx27-pwm";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <26>;
+				clocks = <&clks 10>, <&clks 42>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		emi@b8000000 { /* External Memory Interface */
+			compatible = "simple-bus";
+			reg = <0xb8000000 0x5000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nfc: nand@b8000000 {
+				compatible = "fsl,imx31-nand", "fsl,imx27-nand";
+				reg = <0xb8000000 0x1000>;
+				interrupts = <33>;
+				clocks = <&clks 9>;
+				dmas = <&sdma 30 17 0>;
+				dma-names = "rx-tx";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				clocks = <&clks 56>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges = <0 0 0xa0000000 0x08000000
+					  1 0 0xa8000000 0x08000000
+					  2 0 0xb0000000 0x02000000
+					  3 0 0xb2000000 0x02000000
+					  4 0 0xb4000000 0x02000000
+					  5 0 0xb6000000 0x02000000>;
+				status = "disabled";
 			};
 		};
 	};

arch/arm/boot/dts/imx50-evk.dts

···
 	status = "okay";
 };
 
-&usbh2 {
-	status = "okay";
-};
-
-&usbh3 {
-	status = "okay";
-};
-
 &usbotg {
 	status = "okay";
 };

arch/arm/boot/dts/imx50-pinfunc.h

···
 #define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
 #define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
 #define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL2__KPP_COL_1				0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_2				0x030 0x2dc 0x000 0x0 0x0
 #define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
 #define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
 #define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
···
 #define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
 #define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
 #define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL3__KPP_COL_2				0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_3				0x038 0x2e4 0x000 0x0 0x0
 #define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
 #define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
 #define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0

arch/arm/boot/dts/imx50.dtsi

···
 				status = "disabled";
 			};
 
-			usbh2: usb@53f80400 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80400 0x0200>;
-				interrupts = <16>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbh3: usb@53f80600 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80600 0x0200>;
-				interrupts = <17>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
 			gpio1: gpio@53f84000 {
 				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
 				reg = <0x53f84000 0x4000>;

arch/arm/boot/dts/imx51-babbage.dts

···
 		mux-ext-port = <3>;
 	};
 
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		usbh1phy: usbh1phy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clk_usb>;
-			clock-names = "main_clk";
-			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-			vcc-supply = <&vusb_reg>;
-			#phy-cells = <0>;
-		};
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1reg>;
+		clocks = <&clk_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
 	};
 };
 
···
 	status = "okay";
 };
 
+&pmu {
+	secure-reg-access;
+};
+
 &ssi2 {
 	status = "okay";
 };
···
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
 	vbus-supply = <&reg_hub_reset>;
-	fsl,usbphy = <&usbh1phy>;
+	fsl,usbphy = <&usbphy1>;
 	phy_type = "ulpi";
 	status = "okay";
 };

arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts

···
 		fsl,mux-ext-port = <3>;
 	};
 
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		usbh1phy: usbh1phy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-			clock-names = "main_clk";
-			clock-frequency = <19200000>;
-			#phy-cells = <0>;
-		};
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
 	};
 };
 
···
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbh1phy>;
+	fsl,usbphy = <&usbphy1>;
 	dr_mode = "host";
 	phy_type = "ulpi";
 	status = "okay";

arch/arm/boot/dts/imx51-zii-rdu1.dts

···
 	status = "okay";
 };
 
+&gpio1 {
+	unused-sd3-wp-gpio {
+		/*
+		 * See pinctrl_esdhc1 below for more details on this
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
···
 
 		rmi4-f11@11 {
 			reg = <0x11>;
-			touchscreen-inverted-y;
+			touchscreen-inverted-x;
 			touchscreen-swapped-x-y;
 			syna,sensor-type = <1>;
 		};
···
 
 &ipu_di0_disp1 {
 	remote-endpoint = <&display_in>;
+};
+
+&pmu {
+	secure-reg-access;
 };
 
 &ssi2 {
···
 	rave-sp {
 		compatible = "zii,rave-sp-rdu1";
 		current-speed = <38400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
 		watchdog {
 			compatible = "zii,rave-sp-watchdog";
+		};
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+
+		eeprom@ae {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xae 0x200>;
+			zii,eeprom-name = "switch-eeprom";
+			/*
+			 * Not all RDU1s have this functionality, so we
+			 * rely on the bootloader to enable this
+			 */
+			status = "disabled";
 		};
 	};
 };
···
 	phy_type = "utmi_wide";
 	vbus-supply = <&reg_5p0v_main>;
 	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
 };
 
 &iomuxc {
···
 			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
 			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
 			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			/*
+			 * GPIO1_1 is not directly used by eSDHC1 in
+			 * any capacity, but earlier versions of RDU1
+			 * used that pin as WP GPIO for eSDHC3 and
+			 * because of that that pad has an external
+			 * pull-up resistor. This is problematic
+			 * because out of reset the pad is configured
+			 * as ALT0 which serves as SD1_WP, which, when
+			 * pulled high by and external pull-up, will
+			 * inhibit execution of any write request to
+			 * attached eMMC device.
+			 *
+			 * To avoid this problem we configure the pad
+			 * to ALT1/GPIO and avoid driving SD1_WP
+			 * signal high.
+			 */
+			MX51_PAD_GPIO1_1__GPIO1_1		0x0000
 		>;
 	};
 

arch/arm/boot/dts/imx51-zii-scu2-mezz.dts

···
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU2 Mezz Board";
+	compatible = "zii,imx51-scu2-mezz", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		reg = <0x90000000 0>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio_gpio;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	mdio_gpio: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swmdio>;
+		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port4";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port5";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port6";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "port7";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "cpu";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "mezz2esb";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		compatible = "atmel,at45", "atmel,dataflash";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-supply = <&vgen3_reg>;
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-mezz";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x20a4
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x2004
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+			MX51_PAD_EIM_A20__GPIO2_14		0x0085
+			MX51_PAD_EIM_A21__GPIO2_15		0x00e5
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_swmdio: swmdiogrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D22__GPIO2_6		0x100
+			MX51_PAD_EIM_D23__GPIO2_7		0x100
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D9__GPIO3_13		0x85
+		>;
+	};
+};

arch/arm/boot/dts/imx51-zii-scu3-esb.dts

···
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU3 ESB board";
+	compatible = "zii,imx51-scu3-esb", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		reg = <0x90000000 0>;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port3";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "scu2scu";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "esb2host";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "esb2mezz";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					phy-mode = "mii";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ipu {
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-esb";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_CK__GPIO4_20		0xc5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			MX51_PAD_USBH1_DATA0__UART2_CTS		0x1c5
+			MX51_PAD_USBH1_DATA3__UART2_RTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_RXD__GPIO4_19		0x100
+		>;
+	};
+};

arch/arm/boot/dts/imx51.dtsi

···
 		};
 	};
 
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
 
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy0: usbphy0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 
 	display-subsystem {
···
 					bus-width = <4>;
 					status = "disabled";
 				};
+			};
+
+			aipstz1: bridge@73f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x73f00000 0x60>;
 			};
 
 			usbotg: usb@73f80000 {
···
 			reg = <0x80000000 0x10000000>;
 			ranges;
 
+			aipstz2: bridge@83f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x83f00000 0x60>;
+			};
+
 			iim: iim@83f98000 {
 				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
+			};
+
+			tigerp: tigerp@83fa0000 {
+				compatible = "fsl,imx51-tigerp";
+				reg = <0x83fa0000 0x28>;
 			};
 
 			owire: owire@83fa4000 {
···
 				status = "disabled";
 			};
 
+			m4if: m4if@83fd8000 {
+				compatible = "fsl,imx51-m4if";
+				reg = <0x83fd8000 0x1000>;
+			};
+
 			weim: weim@83fda000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
···
 					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
+			};
+
+			vpu@83ff4000 {
+				compatible = "fsl,imx51-vpu", "cnm,codahx4";
+				reg = <0x83ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&iram>;
+			};
+
+			sahara: crypto@83ff8000 {
+				compatible = "fsl,imx53-sahara", "fsl,imx51-sahara";
+				reg = <0x83ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
 			};
 		};
 	};

arch/arm/boot/dts/imx53-kp-ddc.dts

···
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, [e-mail]
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 DDC";
+	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		power-supply = <&reg_backlight>;
+		brightness-levels = <0 24 28 32 36
+				     40 44 48 52 56
+				     60 64 68 72 76
+				     80 84 88 92 96 100>;
+		default-brightness-level = <20>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp>;
+
+		port@0 {
+			reg = <0>;
+
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "koe,tx14d24vm1bpa";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-supply";
+		regulator-min-microvolt = <15000000>;
+		regulator-max-microvolt = <15000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c3 {
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+	};
+
+	gpio-expander2@21 {
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iomuxc {
+	imx53-kp-ddc {
+		pinctrl_disp: dispgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
+				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
+			>;
+		};
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pmic {
+	fsl,mc13xxx-uses-touch;
+};

arch/arm/boot/dts/imx53-kp-hsc.dts

···
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, [e-mail]
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 HSC";
+	compatible = "kiebackpeter,imx53-hsc", "fsl,imx53";
+};
+
+&fec {
+	status = "okay";
+
+	fixed-link { /* RMII fixed link to LAN9303 */
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	switch: switch@a {
+		compatible = "smsc,lan9303-i2c";
+		reg = <0xa>;
+		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+		reset-duration = <400>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 { /* RMII fixed link to master */
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&fec>;
+			};
+
+			port@1 { /* external port 1 */
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 { /* external port 2 */
+				reg = <2>;
+				label = "lan2";
+			};
+		};
+	};
+};

arch/arm/boot/dts/imx53-kp.dtsi

···
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, [e-mail]
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	buzzer {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buzzer>;
+		pwms = <&pwm1 0 500000>;
+	};
+
+	gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button-kalt {
+			label = "Kaltstart";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-pwr {
+			label = "PowerFailInterrupt";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-bus {
+			label = "bus";
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-error {
+			label = "error";
+			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-flash {
+			label = "flash";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	gpio-expander1@22 {
+		compatible = "nxp,pcf8574";
+		reg = <0x22>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kp_common>;
+
+	imx53-kp-common {
+		pinctrl_buzzer: buzzergrp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
+			>;
+		};
+
+		pinctrl_gpiobuttons: gpiobuttonsgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+				MX53_PAD_EIM_D22__GPIO3_22 0x1e4
+			>;
+		};
+
+		pinctrl_kp_common: kpcommongrp {
+			fsl,pins = <
+				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+				MX53_PAD_GPIO_19__GPIO4_5  0x1e4
+				MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
+				MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
+				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
+				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
+				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
+				MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+				MX53_PAD_EIM_D18__GPIO3_18 0x1e4
+				MX53_PAD_EIM_D21__GPIO3_21 0x1e4
+				MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+				MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
+				MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
+				MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
+				MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
+				MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
+				MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
+			>;
+		};
+
+		pinctrl_leds: ledgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
+				MX53_PAD_EIM_D28__GPIO3_28 0x1d4
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
+				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
+			>;
+		};
+	};
+};
+
+&pinctrl_uart1 {
+	fsl,pins = <
+		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
+		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
+		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
+		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
+	>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "disabled";
+};

arch/arm/boot/dts/imx53-ppd.dts

···
 		regulator-always-on;
 	};
 
+	reg_3v3: regulator-3v3 {
+		/* TPS54320 */
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_lcd: regulator-3v3-lcd {
+		/* MIC2009 */
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_3V3";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	pwm_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm2 0 50000>;
···
 				     234 237 239 242 244 247 249 252 255>;
 		default-brightness-level = <0>;
 		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3_lcd>;
 	};
 
 	leds {
···
 		};
 	};
 
-	usbphy2: usbphy2 {
+	usbphy2: usbphy-2 {
 		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
 		reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
 		clock-names = "main_clk";
 		clock-frequency = <24000000>;
···
 		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
 	};
 
-	usbphy3: usbphy3 {
+	usbphy3: usbphy-3 {
 		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
 		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
 		clock-names = "main_clk";
 
···
 
 	panel-lvds0 {
 		compatible = "nvd,9128";
+		power-supply = <&reg_3v3_lcd>;
 
 		port {
 			panel_in_lvds0: endpoint {
···
 			};
 		};
 	};
+};
+
+&usbphy0 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&usbphy1 {
+	vcc-supply = <&reg_3v3>;
 };
 
 &audmux {
···
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_3v3>;
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
 	status = "okay";
···
 			};
 		};
 	};
+};
+
+&pmu {
+	secure-reg-access;
 };
 
 &pwm1 {

arch/arm/boot/dts/imx53-qsb-common.dtsi

···
 	imx53-qsb {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
 				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
 				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
 				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
···
 				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
 				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
 				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_codec: codecgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
 			>;
 		};
 
···
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
 		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;

arch/arm/boot/dts/imx53.dtsi

···
 		};
 	};
 
-	pmu {
+	pmu: pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupt-parent = <&tzic>;
 		interrupts = <77>;
···
 				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
+			};
+
+			tigerp: tigerp@63fa0000 {
+				compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
+				reg = <0x63fa0000 0x28>;
 			};
 
 			owire: owire@63fa4000 {

arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts

···
 
 /* Colibri MMC */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mmc_cd>;
-	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6dl-icore-mipi.dts

···
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Engicam S.r.l.
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <[e-mail]>
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};

arch/arm/boot/dts/imx6dl-mamoj.dts

···
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6dl.dtsi"
 
 / {
 	model = "BTicino i.MX6DL Mamoj board";
 	compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
+		default-brightness-level = <7>;
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_lcd_lr>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-lcd-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-dvdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 1 0>;
+		enable-active-high;
+		startup-delay-us = <21000>;
+	};
+
+	reg_lcd_power: regulator-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-enable";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 6 0>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_3v3>;
+	};
+
+	reg_lcd_vgl: regulator-lcd-vgl {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_power>;
+	};
+
+	reg_lcd_vgh: regulator-lcd-vgh {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgh";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_avdd>;
+	};
+
+	reg_lcd_vcom: regulator-lcd-vcom {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vcom";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <11000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgh>;
+	};
+
+	reg_lcd_lr: regulator-lcd-lr {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vcom>;
+	};
+
+	reg_lcd_avdd: regulator-lcd-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-avdd";
+		regulator-min-microvolt = <10280000>;
+		regulator-max-microvolt = <10280000>;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgl>;
+	};
+
+	reg_usb_host: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhost-vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhost>;
+		regulator-min-microvolt = <50000000>;
+		regulator-max-microvolt = <50000000>;
+		gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wl18xx_vmmc:  regulator-wl18xx-vmcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
 };
 
 &fec {
···
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
 };
 
 &usdhc3 {
···
 		>;
 	};
 
+	pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10 /* VDOUT_HSYNC */
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10 /* VDOUT_VSYNC */
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04	   0x10 /* VDOUT_RESET */
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x40013058 /* EN_LCD33V */
+			MX6QDL_PAD_SD4_DAT5__GPIO2_IO13		0x4001b0b0 /* EN_AVDD */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x40013058 /* ENVGH */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x40013058 /* ENVGL */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x40013058 /* LCD_POWER */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x40013058 /* EN_VCOM_LCD */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x40013058 /* LCD_L_R */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x40013058 /* LCD_U_D */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhost: usbhostgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17069
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10079
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
 		>;
 	};
 
···
 			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
 			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
 			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21	0x4001b0b0
 		>;
 	};
 };

arch/arm/boot/dts/imx6dl-nit6xlite.dts

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 

arch/arm/boot/dts/imx6dl-nitrogen6x.dts

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2013 Boundary Devices, Inc.
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/imx6dl-riotboard.dts

···
 		reg = <0x10000000 0x40000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
+	chosen {
+		stdout-path = "serial1:115200n8";
 	};
 
 	leds {
···
 			"Headphone Jack", "HP_OUT";
 			mux-int-port = <1>;
 			mux-ext-port = <3>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
 	};
 };
 

arch/arm/boot/dts/imx6dl.dtsi

···
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
···
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 

arch/arm/boot/dts/imx6q-apalis-eval.dts

···
 		rtc1 = &snvs_rtc;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
···
 		 */
 		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
+		power-supply = <&reg_3v3_sw>;
 
 		port {
 			lcd_panel_in: endpoint {
···
 		enable-active-high;
 		status = "okay";
 	};
+
+	reg_3v3_sw: regulator-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &backlight {
 	brightness-levels = <0 127 191 223 239 247 251 255>;
 	default-brightness-level = <1>;
+	power-supply = <&reg_3v3_sw>;
 	status = "okay";
 };
 
 &can1 {
+	xceiver-supply = <&reg_3v3_sw>;
 	status = "okay";
 };
 
 &can2 {
+	xceiver-supply = <&reg_3v3_sw>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts

···
 		rtc1 = &snvs_rtc;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";

arch/arm/boot/dts/imx6q-apalis-ixora.dts

···
 		rtc1 = &snvs_rtc;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";

arch/arm/boot/dts/imx6q-cm-fx6.dts

···
 	>;
 };
 
+&cpu1 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu2 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu3 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";

arch/arm/boot/dts/imx6q-icore-mipi.dts

···
 	status = "okay";
 };
 
+&mipi_csi {
+	status = "okay";
+};
+
+&ov5640 {
+	status = "okay";
+};
+
 &usdhc3 {
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-nitrogen6_max.dts

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 

arch/arm/boot/dts/imx6q-nitrogen6_som2.dts

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 

arch/arm/boot/dts/imx6q-nitrogen6x.dts

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2013 Boundary Devices, Inc.
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/imx6q-var-dt6customboard.dts

···
 		touchscreen-size-y = <480>;
 		touchscreen-inverted-x;
 		touchscreen-inverted-y;
+		wakeup-source;
 	};
 
 	rtc@68 {

arch/arm/boot/dts/imx6q.dtsi

···
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
···
 			soc-supply = <&reg_soc>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <2>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <3>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 

arch/arm/boot/dts/imx6qdl-apalis.dtsi

···
 		status = "disabled";
 	};
 
-	reg_1p8v: regulator-1p8v {
+	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
 
-	reg_2p5v: regulator-2p5v {
+	reg_module_3v3_audio: regulator-module-3v3-audio {
 		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
+		regulator-name = "+V3.3_AUDIO";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
···
 
 			vgen4_reg: vgen4 {
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
···
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
 	};
 
 	/* STMPE811 touch screen controller */
···
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
-	vqmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
-	voltage-ranges = <3300 3300>;
+	disable-wp;
+	no-1-8-v;
 	status = "disabled";
 };
 
···
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	vqmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <4>;
-	voltage-ranges = <3300 3300>;
+	disable-wp;
+	no-1-8-v;
 	status = "disabled";
 };
 
···
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
-	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	non-removable;
 	status = "okay";
 };
···
 			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
 			/* eMMC reset */
 			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170f9
 		>;
 	};
 };

arch/arm/boot/dts/imx6qdl-colibri.dtsi

···
 		status = "disabled";
 	};
 
-	reg_1p8v: regulator-1p8v {
+	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
 
-	reg_2p5v: regulator-2p5v {
+	reg_module_3v3_audio: regulator-module-3v3-audio {
 		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
+		regulator-name = "+V3.3_AUDIO";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
···
 
 			vgen4_reg: vgen4 {
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
···
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
 		lrclk-strength = <3>;
 	};
 
···
 /* Colibri MMC */
 &usdhc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vqmmc-supply = <&reg_3p3v>;
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
+	disable-wp;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <4>;
-	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	status = "disabled";
 };
 
···
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
-	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	non-removable;
 	status = "okay";
 };
···
 
 	pinctrl_gpio_keys: gpiokeys {
 		fsl,pins = <
-			/* Power button */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
 		>;
 	};
 
···
 
 	pinctrl_mmc_cd: gpiommccd {
 		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x80000000
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
 		>;
 	};
 
···
 			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
 			/* eMMC reset */
 			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170b9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170b9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170b9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170b9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170f9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170f9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170f9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170f9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170f9
 		>;
 	};
 

arch/arm/boot/dts/imx6qdl-icore.dtsi

···
 		regulator-always-on;
 	};
 
-
-	reg_2p5v: regulator-3p3v {
+	reg_2p5v: regulator-2p5v {
 		compatible = "regulator-fixed";
 		regulator-name = "2P5V";
 		regulator-min-microvolt = <2500000>;
···
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_3p3v>;
+		powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
 	sgtl5000: codec@a {
 		#sound-dai-cells = <0>;
 		compatible = "fsl,sgtl5000";
···
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&mipi_csi {
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
 	};
 };
 
···
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
 			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	  0x130b0
 		>;
 	};
 

arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
···
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 
 	rtc@6f {

arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
···
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 };
 

arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
···
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 };
 

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2013 Boundary Devices, Inc.
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
···
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 };
 

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

···
 #include <dt-bindings/gpio/gpio.h>
 
 / {
+	chosen {
+		stdout-path = &uart4;
+	};
+
 	memory@10000000 {
 		reg = <0x10000000 0x80000000>;
 	};
···
 				reg = <0x34>;
 				gpio-controller;
 				#gpio-cells = <2>;
+			};
+
+			light-sensor@44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer@e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer@1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 			};
 		};
 	};

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

···
 			sw4_reg: sw4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
 			};
 
 			swbst_reg: swbst {

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

···
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
 	sound {
 		compatible = "fsl,imx6-wandboard-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
···
 		model = "imx-spdif";
 		spdif-controller = <&spdif>;
 		spdif-out;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
 	};
 };
 
···
 			>;
 		};
 
+		pinctrl_usbotgvbus: usbotgvbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+			>;
+		};
+
 		pinctrl_usdhc1: usdhc1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
···
 };
 
 &usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi

···
 	rave-sp {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
 		watchdog {
 			compatible = "zii,rave-sp-watchdog";
+		};
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
 		};
 	};
 };
···
 
 		rmi4-f11@11 {
 			reg = <0x11>;
-			touchscreen-inverted-y;
+			touchscreen-inverted-x;
 			touchscreen-swapped-x-y;
 			syna,sensor-type = <1>;
 		};
 
 		rmi4-f12@12 {
 			reg = <0x12>;
-			touchscreen-inverted-y;
+			touchscreen-inverted-x;
 			touchscreen-swapped-x-y;
 			syna,sensor-type = <1>;
 		};

arch/arm/boot/dts/imx6qdl.dtsi

···
 
 			crypto: caam@2100000 {
 				compatible = "fsl,sec-v4.0";
-				fsl,sec-era = <4>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;

arch/arm/boot/dts/imx6qp-nitrogen6_max.dts

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2017 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/imx6sl-evk.dts

···
 	model = "Freescale i.MX6 SoloLite EVK Board";
 	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
···
 
 	reg_lcd_3v3: regulator-lcd-3v3 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
 		regulator-name = "lcd-3v3";
 		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
···
 			sw4_reg: sw4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
 			};
 
 			swbst_reg: swbst {
···
 		pinctrl_pwm1: pwmgrp {
 			fsl,pins = <
 				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_reg_lcd_3v3: reglcd3v3grp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW5__GPIO4_IO03    0x17059
 			>;
 		};
 

arch/arm/boot/dts/imx6sl.dtsi

···
 				396000          1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
 					<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
 					<&clks IMX6SL_CLK_PLL1_SYS>;
···
 				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x110>;
 					anatop-vol-bit-shift = <8>;
···
 				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2850000>;
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x130>;
 					anatop-vol-bit-shift = <8>;
···
 				#interrupt-cells = <3>;
 				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
-				pu-supply = <&reg_pu>;
-				clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
-					 <&clks IMX6SL_CLK_GPU2D_PODF>;
-				#power-domain-cells = <1>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+						         <&clks IMX6SL_CLK_GPU2D_PODF>;
+					};
+
+					pd_disp: power-domain@2 {
+						reg = <2>;
+						#power-domain-cells = <0>;
+						clocks = <&clks IMX6SL_CLK_LCDIF_AXI>,
+							 <&clks IMX6SL_CLK_LCDIF_PIX>,
+							 <&clks IMX6SL_CLK_EPDC_AXI>,
+							 <&clks IMX6SL_CLK_EPDC_PIX>,
+							 <&clks IMX6SL_CLK_PXP_AXI>;
+					};
+				};
 			};
 
 			gpr: iomuxc-gpr@20e0000 {
···
 					 <&clks IMX6SL_CLK_DUMMY>;
 				clock-names = "pix", "axi", "disp_axi";
 				status = "disabled";
+				power-domains = <&pd_disp>;
 			};
 
 			dcp: dcp@20fc000 {
···
 				reg = <0x021d8000 0x4000>;
 				status = "disabled";
 			};
+		};
+
+		gpu_2d: gpu@2200000 {
+			compatible = "vivante,gc";
+			reg = <0x02200000 0x4000>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+				 <&clks IMX6SL_CLK_GPU2D_OVG>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+		};
+
+		gpu_vg: gpu@2204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+				 <&clks IMX6SL_CLK_GPU2D_OVG>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
 		};
 	};
 };

arch/arm/boot/dts/imx6sll-evk.dts

···
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+	model = "Freescale i.MX6SLL EVK Board";
+	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_aud3v: regulator-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: regulator-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
+		regulator-name = "SD3_WIFI";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd3_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
+		>;
+	};
+
+	pinctrl_usb_otg1_vbus: vbus1grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus: vbus2grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+		>;
+	};
+
+	pinctrl_reg_lcd_3v3: reglcd3v3grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
+		>;
+	};
+
+	pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x17061
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x13061
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x17061
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x17061
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x17061
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x17061
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170a1
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130a1
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170a1
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170a1
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170a1
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170a1
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170e9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170e9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170e9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170e9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170e9
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA00__LCD_DATA00	0x79
+			MX6SLL_PAD_LCD_DATA01__LCD_DATA01	0x79
+			MX6SLL_PAD_LCD_DATA02__LCD_DATA02	0x79
+			MX6SLL_PAD_LCD_DATA03__LCD_DATA03	0x79
+			MX6SLL_PAD_LCD_DATA04__LCD_DATA04	0x79
+			MX6SLL_PAD_LCD_DATA05__LCD_DATA05	0x79
+			MX6SLL_PAD_LCD_DATA06__LCD_DATA06	0x79
+			MX6SLL_PAD_LCD_DATA07__LCD_DATA07	0x79
+			MX6SLL_PAD_LCD_DATA08__LCD_DATA08	0x79
+			MX6SLL_PAD_LCD_DATA09__LCD_DATA09	0x79
+			MX6SLL_PAD_LCD_DATA10__LCD_DATA10	0x79
+			MX6SLL_PAD_LCD_DATA11__LCD_DATA11	0x79
+			MX6SLL_PAD_LCD_DATA12__LCD_DATA12	0x79
+			MX6SLL_PAD_LCD_DATA13__LCD_DATA13	0x79
+			MX6SLL_PAD_LCD_DATA14__LCD_DATA14	0x79
+			MX6SLL_PAD_LCD_DATA15__LCD_DATA15	0x79
+			MX6SLL_PAD_LCD_DATA16__LCD_DATA16	0x79
+			MX6SLL_PAD_LCD_DATA17__LCD_DATA17	0x79
+			MX6SLL_PAD_LCD_DATA18__LCD_DATA18	0x79
+			MX6SLL_PAD_LCD_DATA19__LCD_DATA19	0x79
+			MX6SLL_PAD_LCD_DATA20__LCD_DATA20	0x79
+			MX6SLL_PAD_LCD_DATA21__LCD_DATA21	0x79
+			MX6SLL_PAD_LCD_DATA22__LCD_DATA22	0x79
+			MX6SLL_PAD_LCD_DATA23__LCD_DATA23	0x79
+			MX6SLL_PAD_LCD_CLK__LCD_CLK		0x79
+			MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE	0x79
+			MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX6SLL_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_pwm1: pmw1grp {
+		fsl,pins = <
+			MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
+		>;
+	};
+};

arch/arm/boot/dts/imx6sll-pinfunc.h

···
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#ifndef __DTS_IMX6SLL_PINFUNC_H
+#define __DTS_IMX6SLL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SLL_PAD_WDOG_B__WDOG1_B                                0x0014 0x02DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB                      0x0014 0x02DC 0x0000 0x1 0x0
+#define MX6SLL_PAD_WDOG_B__UART5_RI_B                             0x0014 0x02DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_WDOG_B__GPIO3_IO18                             0x0014 0x02DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M               0x0018 0x02E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL                          0x0018 0x02E0 0x068C 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT                          0x0018 0x02E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID                       0x0018 0x02E0 0x0560 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY                    0x0018 0x02E0 0x05AC 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21                        0x0018 0x02E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__SD3_WP                            0x0018 0x02E0 0x0794 0x6 0x0
+#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K               0x001C 0x02E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA                          0x001C 0x02E4 0x0690 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT                          0x001C 0x02E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID                       0x001C 0x02E4 0x055C 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL                          0x001C 0x02E4 0x0000 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22                        0x001C 0x02E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B                          0x001C 0x02E4 0x0780 0x6 0x0
+#define MX6SLL_PAD_PWM1__PWM1_OUT                                 0x0020 0x02E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_PWM1__CCM_CLKO                                 0x0020 0x02E8 0x0000 0x1 0x0
+#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT                            0x0020 0x02E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_PWM1__CSI_MCLK                                 0x0020 0x02E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_PWM1__GPIO3_IO23                               0x0020 0x02E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_PWM1__EPIT1_OUT                                0x0020 0x02E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL0__KEY_COL0                             0x0024 0x02EC 0x06A0 0x0 0x0
+#define MX6SLL_PAD_KEY_COL0__I2C2_SCL                             0x0024 0x02EC 0x0684 0x1 0x0
+#define MX6SLL_PAD_KEY_COL0__LCD_DATA00                           0x0024 0x02EC 0x06D8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL0__SD1_CD_B                             0x0024 0x02EC 0x0770 0x4 0x1
+#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24                           0x0024 0x02EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0                             0x0028 0x02F0 0x06C0 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA                             0x0028 0x02F0 0x0688 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01                           0x0028 0x02F0 0x06DC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW0__SD1_WP                               0x0028 0x02F0 0x0774 0x4 0x1
+#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25                           0x0028 0x02F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL1__KEY_COL1                             0x002C 0x02F4 0x06A4 0x0 0x0
+#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI                          0x002C 0x02F4 0x0658 0x1 0x1
+#define MX6SLL_PAD_KEY_COL1__LCD_DATA02                           0x002C 0x02F4 0x06E0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL1__SD3_DATA4                            0x002C 0x02F4 0x0784 0x4 0x0
+#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26                           0x002C 0x02F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1                             0x0030 0x02F8 0x06C4 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO                          0x0030 0x02F8 0x0654 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03                           0x0030 0x02F8 0x06E4 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD                            0x0030 0x02F8 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5                            0x0030 0x02F8 0x0788 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27                           0x0030 0x02F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL2__KEY_COL2                             0x0034 0x02FC 0x06A8 0x0 0x0
+#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0                           0x0034 0x02FC 0x065C 0x1 0x1
+#define MX6SLL_PAD_KEY_COL2__LCD_DATA04                           0x0034 0x02FC 0x06E8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL2__CSI_DATA12                           0x0034 0x02FC 0x05B8 0x3 0x1
+#define MX6SLL_PAD_KEY_COL2__SD3_DATA6                            0x0034 0x02FC 0x078C 0x4 0x0
+#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28                           0x0034 0x02FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2                             0x0038 0x0300 0x06C8 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK                          0x0038 0x0300 0x0650 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05                           0x0038 0x0300 0x06EC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13                           0x0038 0x0300 0x05BC 0x3 0x1
+#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7                            0x0038 0x0300 0x0790 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29                           0x0038 0x0300 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__KEY_COL3                             0x003C 0x0304 0x06AC 0x0 0x0
+#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS                            0x003C 0x0304 0x05A0 0x1 0x1
+#define MX6SLL_PAD_KEY_COL3__LCD_DATA06                           0x003C 0x0304 0x06F0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL3__CSI_DATA14                           0x003C 0x0304 0x05C0 0x3 0x1
+#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30                           0x003C 0x0304 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__SD1_RESET                            0x003C 0x0304 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3                             0x0040 0x0308 0x06CC 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC                             0x0040 0x0308 0x059C 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07                           0x0040 0x0308 0x06F4 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15                           0x0040 0x0308 0x05C4 0x3 0x2
+#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31                           0x0040 0x0308 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT                          0x0040 0x0308 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL4__KEY_COL4                             0x0044 0x030C 0x06B0 0x0 0x1
+#define MX6SLL_PAD_KEY_COL4__AUD6_RXD                             0x0044 0x030C 0x0594 0x1 0x1
+#define MX6SLL_PAD_KEY_COL4__LCD_DATA08                           0x0044 0x030C 0x06F8 0x2 0x1
+#define MX6SLL_PAD_KEY_COL4__CSI_DATA16                           0x0044 0x030C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00                           0x0044 0x030C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR                         0x0044 0x030C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4                             0x0048 0x0310 0x06D0 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC                             0x0048 0x0310 0x05A4 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09                           0x0048 0x0310 0x06FC 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17                           0x0048 0x0310 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01                           0x0048 0x0310 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC                          0x0048 0x0310 0x076C 0x6 0x2
+#define MX6SLL_PAD_KEY_COL5__KEY_COL5                             0x004C 0x0314 0x0694 0x0 0x1
+#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS                            0x004C 0x0314 0x05A8 0x1 0x1
+#define MX6SLL_PAD_KEY_COL5__LCD_DATA10                           0x004C 0x0314 0x0700 0x2 0x0
+#define MX6SLL_PAD_KEY_COL5__CSI_DATA18                           0x004C 0x0314 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02                           0x004C 0x0314 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR                         0x004C 0x0314 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5                             0x0050 0x0318 0x06B4 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD                             0x0050 0x0318 0x0598 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11                           0x0050 0x0318 0x0704 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19                           0x0050 0x0318 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03                           0x0050 0x0318 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC                          0x0050 0x0318 0x0768 0x6 0x3
+#define MX6SLL_PAD_KEY_COL6__KEY_COL6                             0x0054 0x031C 0x0698 0x0 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX                         0x0054 0x031C 0x075C 0x1 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX                         0x0054 0x031C 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL6__LCD_DATA12                           0x0054 0x031C 0x0708 0x2 0x1
+#define MX6SLL_PAD_KEY_COL6__CSI_DATA20                           0x0054 0x031C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04                           0x0054 0x031C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL6__SD3_RESET                            0x0054 0x031C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6                             0x0058 0x0320 0x06B8 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX                         0x0058 0x0320 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX                         0x0058 0x0320 0x075C 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13                           0x0058 0x0320 0x070C 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21                           0x0058 0x0320 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05                           0x0058 0x0320 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT                          0x0058 0x0320 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL7__KEY_COL7                             0x005C 0x0324 0x069C 0x0 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS                        0x005C 0x0324 0x0758 0x1 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS                        0x005C 0x0324 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL7__LCD_DATA14                           0x005C 0x0324 0x0710 0x2 0x1
+#define MX6SLL_PAD_KEY_COL7__CSI_DATA22                           0x005C 0x0324 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06                           0x005C 0x0324 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL7__SD1_WP                               0x005C 0x0324 0x0774 0x6 0x3
+#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7                             0x0060 0x0328 0x06BC 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS                        0x0060 0x0328 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS                        0x0060 0x0328 0x0758 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15                           0x0060 0x0328 0x0714 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23                           0x0060 0x0328 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07                           0x0060 0x0328 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B                             0x0060 0x0328 0x0770 0x6 0x3
+#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00                       0x0064 0x032C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI                       0x0064 0x032C 0x0658 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24                        0x0064 0x032C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00                        0x0064 0x032C 0x05C8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07                        0x0064 0x032C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01                       0x0068 0x0330 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO                       0x0068 0x0330 0x0654 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25                        0x0068 0x0330 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01                        0x0068 0x0330 0x05CC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08                        0x0068 0x0330 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02                       0x006C 0x0334 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0                        0x006C 0x0334 0x065C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26                        0x006C 0x0334 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02                        0x006C 0x0334 0x05D0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09                        0x006C 0x0334 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03                       0x0070 0x0338 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK                       0x0070 0x0338 0x0650 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27                        0x0070 0x0338 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03                        0x0070 0x0338 0x05D4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10                        0x0070 0x0338 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04                       0x0074 0x033C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1                        0x0074 0x033C 0x0660 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28                        0x0074 0x033C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04                        0x0074 0x033C 0x05D8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11                        0x0074 0x033C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05                       0x0078 0x0340 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2                        0x0078 0x0340 0x0664 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29                        0x0078 0x0340 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05                        0x0078 0x0340 0x05DC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12                        0x0078 0x0340 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06                       0x007C 0x0344 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3                        0x007C 0x0344 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30                        0x007C 0x0344 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06                        0x007C 0x0344 0x05E0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13                        0x007C 0x0344 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07                       0x0080 0x0348 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY                        0x0080 0x0348 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31                        0x0080 0x0348 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07                        0x0080 0x0348 0x05E4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14                        0x0080 0x0348 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08                       0x0084 0x034C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI                       0x0084 0x034C 0x063C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0                    0x0084 0x034C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15                        0x0084 0x034C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09                       0x0088 0x0350 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO                       0x0088 0x0350 0x0638 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1                    0x0088 0x0350 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16                        0x0088 0x0350 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10                       0x008C 0x0354 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0                        0x008C 0x0354 0x0648 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2                    0x008C 0x0354 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17                        0x008C 0x0354 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11                       0x0090 0x0358 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK                       0x0090 0x0358 0x0630 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3                    0x0090 0x0358 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18                        0x0090 0x0358 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12                       0x0094 0x035C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX                      0x0094 0x035C 0x074C 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX                      0x0094 0x035C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM                      0x0094 0x035C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19                        0x0094 0x035C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1                        0x0094 0x035C 0x064C 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13                       0x0098 0x0360 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX                      0x0098 0x0360 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX                      0x0098 0x0360 0x074C 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ                      0x0098 0x0360 0x0668 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20                        0x0098 0x0360 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2                        0x0098 0x0360 0x0640 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14                       0x009C 0x0364 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS                     0x009C 0x0364 0x0748 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS                     0x009C 0x0364 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT                     0x009C 0x0364 0x066C 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21                        0x009C 0x0364 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3                        0x009C 0x0364 0x0644 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15                       0x00A0 0x0368 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS                     0x00A0 0x0368 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS                     0x00A0 0x0368 0x0748 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE                     0x00A0 0x0368 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22                        0x00A0 0x0368 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY                        0x00A0 0x0368 0x0634 0x6 0x1
+#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P                       0x00A4 0x036C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI                        0x00A4 0x036C 0x0624 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL                           0x00A4 0x036C 0x0684 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08                         0x00A4 0x036C 0x05E8 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23                         0x00A4 0x036C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE                           0x00A8 0x0370 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO                         0x00A8 0x0370 0x0620 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA                            0x00A8 0x0370 0x0688 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09                          0x00A8 0x0370 0x05EC 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24                          0x00A8 0x0370 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE                           0x00AC 0x0374 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0                          0x00AC 0x0374 0x0628 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10                          0x00AC 0x0374 0x05B0 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25                          0x00AC 0x0374 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR                         0x00B0 0x0378 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK                        0x00B0 0x0378 0x061C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4                         0x00B0 0x0378 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11                         0x00B0 0x0378 0x05B4 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26                         0x00B0 0x0378 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0                         0x00B4 0x037C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1                         0x00B4 0x037C 0x062C 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT                           0x00B4 0x037C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27                         0x00B4 0x037C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1                         0x00B8 0x0380 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B                            0x00B8 0x0380 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT                           0x00B8 0x0380 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28                         0x00B8 0x0380 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2                         0x00BC 0x0384 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL                           0x00BC 0x0384 0x068C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT                           0x00BC 0x0384 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29                         0x00BC 0x0384 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3                         0x00C0 0x0388 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA                           0x00C0 0x0388 0x0690 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT                           0x00C0 0x0388 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30                         0x00C0 0x0388 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK                         0x00C4 0x038C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2                         0x00C4 0x038C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK                         0x00C4 0x038C 0x05F4 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31                         0x00C4 0x038C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET                          0x00C4 0x038C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE                           0x00C8 0x0390 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3                          0x00C8 0x0390 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC                           0x00C8 0x0390 0x05F0 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00                          0x00C8 0x0390 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT                         0x00C8 0x0390 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL                           0x00CC 0x0394 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY                          0x00CC 0x0394 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK                            0x00CC 0x0394 0x0000 0x3 0x0
+#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01                          0x00CC 0x0394 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDRL__SD2_WP                              0x00CC 0x0394 0x077C 0x6 0x2
+#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP                           0x00D0 0x0398 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT                            0x00D0 0x0398 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC                           0x00D0 0x0398 0x05F8 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02                          0x00D0 0x0398 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B                            0x00D0 0x0398 0x0778 0x6 0x2
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0                         0x00D4 0x039C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS                          0x00D4 0x039C 0x0588 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX                       0x00D4 0x039C 0x0754 0x2 0x4
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX                       0x00D4 0x039C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03                         0x00D4 0x039C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5                         0x00D4 0x039C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1                         0x00D8 0x03A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD                           0x00D8 0x03A0 0x057C 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX                       0x00D8 0x03A0 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX                       0x00D8 0x03A0 0x0754 0x2 0x5
+#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04                         0x00D8 0x03A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6                         0x00D8 0x03A0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0                           0x00DC 0x03A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS                       0x00DC 0x03A4 0x0750 0x2 0x2
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS                       0x00DC 0x03A4 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05                          0x00DC 0x03A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7                          0x00DC 0x03A4 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1                           0x00E0 0x03A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS                       0x00E0 0x03A8 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS                       0x00E0 0x03A8 0x0750 0x2 0x3
+#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06                          0x00E0 0x03A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8                          0x00E0 0x03A8 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0                 0x00E4 0x03AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC                       0x00E4 0x03AC 0x0584 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16                     0x00E4 0x03AC 0x0718 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07                     0x00E4 0x03AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1                 0x00E8 0x03B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS                      0x00E8 0x03B0 0x0590 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17                     0x00E8 0x03B0 0x071C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08                     0x00E8 0x03B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2                 0x00EC 0x03B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD                       0x00EC 0x03B4 0x0580 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18                     0x00EC 0x03B4 0x0720 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09                     0x00EC 0x03B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3                 0x00F0 0x03B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC                       0x00F0 0x03B8 0x058C 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19                     0x00F0 0x03B8 0x0724 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10                     0x00F0 0x03B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM                     0x00F4 0x03BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20                       0x00F4 0x03BC 0x0728 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID                      0x00F4 0x03BC 0x055C 0x4 0x4
+#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11                       0x00F4 0x03BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET                        0x00F4 0x03BC 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ                     0x00F8 0x03C0 0x0668 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21                       0x00F8 0x03C0 0x072C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID                      0x00F8 0x03C0 0x0560 0x4 0x3
+#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12                       0x00F8 0x03C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT                      0x00F8 0x03C0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                   0x00FC 0x03C4 0x066C 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22                      0x00FC 0x03C4 0x0730 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI                      0x00FC 0x03C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13                      0x00FC 0x03C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP                          0x00FC 0x03C4 0x0794 0x6 0x2
+#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE                   0x0100 0x03C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23                      0x0100 0x03C8 0x0734 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO                      0x0100 0x03C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14                      0x0100 0x03C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B                        0x0100 0x03C8 0x0780 0x6 0x2
+#define MX6SLL_PAD_LCD_CLK__LCD_CLK                               0x0104 0x03CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN                            0x0104 0x03CC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_CLK__PWM4_OUT                              0x0104 0x03CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15                            0x0104 0x03CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE                         0x0108 0x03D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E                           0x0108 0x03D0 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16                         0x0108 0x03D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC                           0x010C 0x03D4 0x06D4 0x0 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_CS                              0x010C 0x03D4 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX                        0x010C 0x03D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX                        0x010C 0x03D4 0x074C 0x4 0x1
+#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17                          0x010C 0x03D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK                       0x010C 0x03D4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC                           0x0110 0x03D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_RS                              0x0110 0x03D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS                       0x0110 0x03D8 0x0748 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS                       0x0110 0x03D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18                          0x0110 0x03D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL                       0x0110 0x03D8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_RESET                           0x0114 0x03DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_BUSY                            0x0114 0x03DC 0x06D4 0x2 0x1
+#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS                       0x0114 0x03DC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS                       0x0114 0x03DC 0x0748 0x4 0x1
+#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19                          0x0114 0x03DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY                      0x0114 0x03DC 0x05AC 0x6 0x2
+#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00                         0x0118 0x03E0 0x06D8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI                        0x0118 0x03E0 0x0608 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID                        0x0118 0x03E0 0x0560 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT                           0x0118 0x03E0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B                        0x0118 0x03E0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20                         0x0118 0x03E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00                        0x0118 0x03E0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00                     0x0118 0x03E0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01                         0x011C 0x03E4 0x06DC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO                        0x011C 0x03E4 0x0604 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID                        0x011C 0x03E4 0x055C 0x2 0x3
+#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT                           0x011C 0x03E4 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS                          0x011C 0x03E4 0x0570 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21                         0x011C 0x03E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01                        0x011C 0x03E4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01                     0x011C 0x03E4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02                         0x0120 0x03E8 0x06E0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0                         0x0120 0x03E8 0x0614 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT                          0x0120 0x03E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT                           0x0120 0x03E8 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC                           0x0120 0x03E8 0x056C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22                         0x0120 0x03E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02                        0x0120 0x03E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02                     0x0120 0x03E8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03                         0x0124 0x03EC 0x06E4 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK                        0x0124 0x03EC 0x05FC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B                        0x0124 0x03EC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT                           0x0124 0x03EC 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD                           0x0124 0x03EC 0x0564 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23                         0x0124 0x03EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03                        0x0124 0x03EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03                     0x0124 0x03EC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04                         0x0128 0x03F0 0x06E8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1                         0x0128 0x03F0 0x060C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC                          0x0128 0x03F0 0x05F8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB                  0x0128 0x03F0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC                           0x0128 0x03F0 0x0574 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24                         0x0128 0x03F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04                        0x0128 0x03F0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04                     0x0128 0x03F0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05                         0x012C 0x03F4 0x06EC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2                         0x012C 0x03F4 0x0610 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC                          0x012C 0x03F4 0x05F0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS                          0x012C 0x03F4 0x0578 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25                         0x012C 0x03F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05                        0x012C 0x03F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05                     0x012C 0x03F4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06                         0x0130 0x03F8 0x06F0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3                         0x0130 0x03F8 0x0618 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK                         0x0130 0x03F8 0x05F4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD                           0x0130 0x03F8 0x0568 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26                         0x0130 0x03F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06                        0x0130 0x03F8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06                     0x0130 0x03F8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07                         0x0134 0x03FC 0x06F4 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY                         0x0134 0x03FC 0x0600 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK                           0x0134 0x03FC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT                      0x0134 0x03FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27                         0x0134 0x03FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07                        0x0134 0x03FC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07                     0x0134 0x03FC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08                         0x0138 0x0400 0x06F8 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA08__KEY_COL0                           0x0138 0x0400 0x06A0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09                         0x0138 0x0400 0x05EC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK                        0x0138 0x0400 0x061C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28                         0x0138 0x0400 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08                        0x0138 0x0400 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08                     0x0138 0x0400 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09                         0x013C 0x0404 0x06FC 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0                           0x013C 0x0404 0x06C0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08                         0x013C 0x0404 0x05E8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI                        0x013C 0x0404 0x0624 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29                         0x013C 0x0404 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09                        0x013C 0x0404 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09                     0x013C 0x0404 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10                         0x0140 0x0408 0x0700 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA10__KEY_COL1                           0x0140 0x0408 0x06A4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07                         0x0140 0x0408 0x05E4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO                        0x0140 0x0408 0x0620 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30                         0x0140 0x0408 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10                        0x0140 0x0408 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10                     0x0140 0x0408 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11                         0x0144 0x040C 0x0704 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1                           0x0144 0x040C 0x06C4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06                         0x0144 0x040C 0x05E0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1                         0x0144 0x040C 0x062C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31                         0x0144 0x040C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11                        0x0144 0x040C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11                     0x0144 0x040C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12                         0x0148 0x0410 0x0708 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA12__KEY_COL2                           0x0148 0x0410 0x06A8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05                         0x0148 0x0410 0x05DC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS                      0x0148 0x0410 0x0760 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS                      0x0148 0x0410 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00                         0x0148 0x0410 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12                        0x0148 0x0410 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12                     0x0148 0x0410 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13                         0x014C 0x0414 0x070C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2                           0x014C 0x0414 0x06C8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04                         0x014C 0x0414 0x05D8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS                      0x014C 0x0414 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS                      0x014C 0x0414 0x0760 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01                         0x014C 0x0414 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13                        0x014C 0x0414 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13                     0x014C 0x0414 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14                         0x0150 0x0418 0x0710 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA14__KEY_COL3                           0x0150 0x0418 0x06AC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03                         0x0150 0x0418 0x05D4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX                       0x0150 0x0418 0x0764 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX                       0x0150 0x0418 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02                         0x0150 0x0418 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14                        0x0150 0x0418 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14                     0x0150 0x0418 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15                         0x0154 0x041C 0x0714 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3                           0x0154 0x041C 0x06CC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02                         0x0154 0x041C 0x05D0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX                       0x0154 0x041C 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX                       0x0154 0x041C 0x0764 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03                         0x0154 0x041C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15                        0x0154 0x041C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15                     0x0154 0x041C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16                         0x0158 0x0420 0x0718 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA16__KEY_COL4                           0x0158 0x0420 0x06B0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01                         0x0158 0x0420 0x05CC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL                           0x0158 0x0420 0x0684 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04                         0x0158 0x0420 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24                     0x0158 0x0420 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17                         0x015C 0x0424 0x071C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4                           0x015C 0x0424 0x06D0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00                         0x015C 0x0424 0x05C8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA                           0x015C 0x0424 0x0688 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05                         0x015C 0x0424 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25                     0x015C 0x0424 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18                         0x0160 0x0428 0x0720 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA18__KEY_COL5                           0x0160 0x0428 0x0694 0x1 0x2
+#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15                         0x0160 0x0428 0x05C4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1                       0x0160 0x0428 0x0670 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06                         0x0160 0x0428 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26                     0x0160 0x0428 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19                         0x0164 0x042C 0x0724 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5                           0x0164 0x042C 0x06B4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14                         0x0164 0x042C 0x05C0 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2                       0x0164 0x042C 0x0674 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07                         0x0164 0x042C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27                     0x0164 0x042C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20                         0x0168 0x0430 0x0728 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA20__KEY_COL6                           0x0168 0x0430 0x0698 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13                         0x0168 0x0430 0x05BC 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1                       0x0168 0x0430 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08                         0x0168 0x0430 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28                     0x0168 0x0430 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21                         0x016C 0x0434 0x072C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6                           0x016C 0x0434 0x06B8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12                         0x016C 0x0434 0x05B8 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2                       0x016C 0x0434 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09                         0x016C 0x0434 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29                     0x016C 0x0434 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22                         0x0170 0x0438 0x0730 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA22__KEY_COL7                           0x0170 0x0438 0x069C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11                         0x0170 0x0438 0x05B4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3                       0x0170 0x0438 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10                         0x0170 0x0438 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30                     0x0170 0x0438 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23                         0x0174 0x043C 0x0734 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7                           0x0174 0x043C 0x06BC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10                         0x0174 0x043C 0x05B0 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN                          0x0174 0x043C 0x0678 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11                         0x0174 0x043C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31                     0x0174 0x043C 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS                            0x0178 0x0440 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL                             0x0178 0x0440 0x067C 0x1 0x1
+#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX                         0x0178 0x0440 0x0754 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX                         0x0178 0x0440 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL                             0x0178 0x0440 0x068C 0x4 0x1
+#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00                           0x0178 0x0440 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0                           0x0178 0x0440 0x0648 0x6 0x0
+#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND                           0x0178 0x0440 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXC__AUD3_RXC                              0x017C 0x0444 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXC__I2C1_SDA                              0x017C 0x0444 0x0680 0x1 0x1
+#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX                          0x017C 0x0444 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX                          0x017C 0x0444 0x0754 0x2 0x1
+#define MX6SLL_PAD_AUD_RXC__I2C3_SDA                              0x017C 0x0444 0x0690 0x4 0x1
+#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01                            0x017C 0x0444 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1                            0x017C 0x0444 0x064C 0x6 0x0
+#define MX6SLL_PAD_AUD_RXD__AUD3_RXD                              0x0180 0x0448 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI                           0x0180 0x0448 0x063C 0x1 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX                          0x0180 0x0448 0x075C 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX                          0x0180 0x0448 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__SD1_LCTL                              0x0180 0x0448 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02                            0x0180 0x0448 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXC__AUD3_TXC                              0x0184 0x044C 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO                           0x0184 0x044C 0x0638 0x1 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX                          0x0184 0x044C 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX                          0x0184 0x044C 0x075C 0x2 0x1
+#define MX6SLL_PAD_AUD_TXC__SD2_LCTL                              0x0184 0x044C 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03                            0x0184 0x044C 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS                            0x0188 0x0450 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT                             0x0188 0x0450 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS                        0x0188 0x0450 0x0758 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS                        0x0188 0x0450 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL                             0x0188 0x0450 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04                           0x0188 0x0450 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXD__AUD3_TXD                              0x018C 0x0454 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK                           0x018C 0x0454 0x0630 0x1 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS                         0x018C 0x0454 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS                         0x018C 0x0454 0x0758 0x2 0x1
+#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05                            0x018C 0x0454 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT                        0x0190 0x0458 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT                             0x0190 0x0458 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY                           0x0190 0x0458 0x0634 0x2 0x0
+#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB                    0x0190 0x0458 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06                           0x0190 0x0458 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK                        0x0190 0x0458 0x073C 0x6 0x1
+#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX                        0x0194 0x045C 0x0744 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX                        0x0194 0x045C 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__PWM1_OUT                            0x0194 0x045C 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX                        0x0194 0x045C 0x075C 0x2 0x4
+#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX                        0x0194 0x045C 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX                        0x0194 0x045C 0x0764 0x4 0x6
+#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX                        0x0194 0x045C 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16                          0x0194 0x045C 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX                        0x0198 0x0460 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX                        0x0198 0x0460 0x0744 0x0 0x1
+#define MX6SLL_PAD_UART1_TXD__PWM2_OUT                            0x0198 0x0460 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX                        0x0198 0x0460 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX                        0x0198 0x0460 0x075C 0x2 0x5
+#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX                        0x0198 0x0460 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX                        0x0198 0x0460 0x0764 0x4 0x7
+#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17                          0x0198 0x0460 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B                         0x0198 0x0460 0x0000 0x7 0x0
+#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL                             0x019C 0x0464 0x067C 0x0 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS                        0x019C 0x0464 0x0740 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS                        0x019C 0x0464 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2                           0x019C 0x0464 0x0640 0x2 0x0
+#define MX6SLL_PAD_I2C1_SCL__SD3_RESET                            0x019C 0x0464 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12                           0x019C 0x0464 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1                           0x019C 0x0464 0x060C 0x6 0x0
+#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA                             0x01A0 0x0468 0x0680 0x0 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS                        0x01A0 0x0468 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS                        0x01A0 0x0468 0x0740 0x1 0x1
+#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3                           0x01A0 0x0468 0x0644 0x2 0x0
+#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT                          0x01A0 0x0468 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13                           0x01A0 0x0468 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2                           0x01A0 0x0468 0x0610 0x6 0x0
+#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL                             0x01A4 0x046C 0x0684 0x0 0x3
+#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS                            0x01A4 0x046C 0x0570 0x1 0x2
+#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN                             0x01A4 0x046C 0x0738 0x2 0x2
+#define MX6SLL_PAD_I2C2_SCL__SD3_WP                               0x01A4 0x046C 0x0794 0x4 0x3
+#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14                           0x01A4 0x046C 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY                           0x01A4 0x046C 0x0600 0x6 0x1
+#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA                             0x01A8 0x0470 0x0688 0x0 0x3
+#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC                             0x01A8 0x0470 0x056C 0x1 0x2
+#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT                            0x01A8 0x0470 0x0000 0x2 0x0
+#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B                             0x01A8 0x0470 0x0780 0x4 0x3
+#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15                           0x01A8 0x0470 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK                       0x01AC 0x0474 0x05FC 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD                          0x01AC 0x0474 0x0568 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX                      0x01AC 0x0474 0x0764 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX                      0x01AC 0x0474 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0                        0x01AC 0x0474 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET                         0x01AC 0x0474 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08                        0x01AC 0x0474 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC                       0x01AC 0x0474 0x0768 0x6 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI                       0x01B0 0x0478 0x0608 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC                          0x01B0 0x0478 0x0574 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX                      0x01B0 0x0478 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX                      0x01B0 0x0478 0x0764 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1                        0x01B0 0x0478 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT                       0x01B0 0x0478 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09                        0x01B0 0x0478 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO                       0x01B4 0x047C 0x0604 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS                         0x01B4 0x047C 0x0578 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS                     0x01B4 0x047C 0x0760 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS                     0x01B4 0x047C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0                         0x01B4 0x047C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP                            0x01B4 0x047C 0x077C 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10                        0x01B4 0x047C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0                         0x01B8 0x0480 0x0614 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD                           0x01B8 0x0480 0x0564 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS                      0x01B8 0x0480 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS                      0x01B8 0x0480 0x0760 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1                          0x01B8 0x0480 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B                           0x01B8 0x0480 0x0778 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11                         0x01B8 0x0480 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR                       0x01B8 0x0480 0x0000 0x6 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK                       0x01BC 0x0484 0x061C 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK                     0x01BC 0x0484 0x073C 0x1 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX                      0x01BC 0x0484 0x0754 0x2 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX                      0x01BC 0x0484 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK                        0x01BC 0x0484 0x05F4 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET                         0x01BC 0x0484 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12                        0x01BC 0x0484 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC                       0x01BC 0x0484 0x0768 0x6 0x2
+#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI                       0x01C0 0x0488 0x0624 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1                   0x01C0 0x0488 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX                      0x01C0 0x0488 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX                      0x01C0 0x0488 0x0754 0x2 0x3
+#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC                         0x01C0 0x0488 0x05F0 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT                       0x01C0 0x0488 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13                        0x01C0 0x0488 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO                       0x01C4 0x048C 0x0620 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0                   0x01C4 0x048C 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS                     0x01C4 0x048C 0x0750 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS                     0x01C4 0x048C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK                          0x01C4 0x048C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP                            0x01C4 0x048C 0x0774 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14                        0x01C4 0x048C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC                       0x01C4 0x048C 0x076C 0x6 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0                         0x01C8 0x0490 0x0628 0x0 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3                         0x01C8 0x0490 0x0618 0x1 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS                      0x01C8 0x0490 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS                      0x01C8 0x0490 0x0750 0x2 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC                          0x01C8 0x0490 0x05F8 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B                           0x01C8 0x0490 0x0770 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15                         0x01C8 0x0490 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR                       0x01C8 0x0490 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD1_CLK__SD1_CLK                               0x01CC 0x0494 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CLK__KEY_COL0                              0x01CC 0x0494 0x06A0 0x2 0x2
+#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4                            0x01CC 0x0494 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15                            0x01CC 0x0494 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_CMD__SD1_CMD                               0x01D0 0x0498 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CMD__KEY_ROW0                              0x01D0 0x0498 0x06C0 0x2 0x2
+#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5                            0x01D0 0x0498 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14                            0x01D0 0x0498 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0                           0x01D4 0x049C 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA0__KEY_COL1                            0x01D4 0x049C 0x06A4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6                          0x01D4 0x049C 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11                          0x01D4 0x049C 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1                           0x01D8 0x04A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1                            0x01D8 0x04A0 0x06C4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7                          0x01D8 0x04A0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08                          0x01D8 0x04A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2                           0x01DC 0x04A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA2__KEY_COL2                            0x01DC 0x04A4 0x06A8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8                          0x01DC 0x04A4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                          0x01DC 0x04A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3                           0x01E0 0x04A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2                            0x01E0 0x04A8 0x06C8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9                          0x01E0 0x04A8 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                          0x01E0 0x04A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4                           0x01E4 0x04AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA4__KEY_COL3                            0x01E4 0x04AC 0x06AC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N                        0x01E4 0x04AC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX                        0x01E4 0x04AC 0x075C 0x4 0x6
+#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX                        0x01E4 0x04AC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12                          0x01E4 0x04AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5                           0x01E8 0x04B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3                            0x01E8 0x04B0 0x06CC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED                          0x01E8 0x04B0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX                        0x01E8 0x04B0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX                        0x01E8 0x04B0 0x075C 0x4 0x7
+#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09                          0x01E8 0x04B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6                           0x01EC 0x04B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA6__KEY_COL4                            0x01EC 0x04B4 0x06B0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ                          0x01EC 0x04B4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS                       0x01EC 0x04B4 0x0758 0x4 0x4
+#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS                       0x01EC 0x04B4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07                          0x01EC 0x04B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7                           0x01F0 0x04B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4                            0x01F0 0x04B8 0x06D0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY                      0x01F0 0x04B8 0x05AC 0x3 0x3
+#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS                       0x01F0 0x04B8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS                       0x01F0 0x04B8 0x0758 0x4 0x5
+#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10                          0x01F0 0x04B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_RESET__SD2_RESET                           0x01F4 0x04BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_RESET__WDOG2_B                             0x01F4 0x04BC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT                           0x01F4 0x04BC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD2_RESET__CSI_MCLK                            0x01F4 0x04BC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27                          0x01F4 0x04BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CLK__SD2_CLK                               0x01F8 0x04C0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS                             0x01F8 0x04C0 0x0570 0x1 0x1
+#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK                           0x01F8 0x04C0 0x0630 0x2 0x1
+#define MX6SLL_PAD_SD2_CLK__CSI_DATA00                            0x01F8 0x04C0 0x05C8 0x3 0x1
+#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05                            0x01F8 0x04C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CMD__SD2_CMD                               0x01FC 0x04C4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CMD__AUD4_RXC                              0x01FC 0x04C4 0x056C 0x1 0x1
+#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0                            0x01FC 0x04C4 0x0648 0x2 0x1
+#define MX6SLL_PAD_SD2_CMD__CSI_DATA01                            0x01FC 0x04C4 0x05CC 0x3 0x1
+#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT                             0x01FC 0x04C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04                            0x01FC 0x04C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0                           0x0200 0x04C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD                            0x0200 0x04C8 0x0564 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI                         0x0200 0x04C8 0x063C 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02                          0x0200 0x04C8 0x05D0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS                       0x0200 0x04C8 0x0760 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS                       0x0200 0x04C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01                          0x0200 0x04C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1                           0x0204 0x04CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC                            0x0204 0x04CC 0x0574 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO                         0x0204 0x04CC 0x0638 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03                          0x0204 0x04CC 0x05D4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS                       0x0204 0x04CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS                       0x0204 0x04CC 0x0760 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30                          0x0204 0x04CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2                           0x0208 0x04D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS                           0x0208 0x04D0 0x0578 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04                          0x0208 0x04D0 0x05D8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX                        0x0208 0x04D0 0x0764 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX                        0x0208 0x04D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03                          0x0208 0x04D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3                           0x020C 0x04D4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD                            0x020C 0x04D4 0x0568 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05                          0x020C 0x04D4 0x05DC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX                        0x020C 0x04D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX                        0x020C 0x04D4 0x0764 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28                          0x020C 0x04D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4                           0x0210 0x04D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4                           0x0210 0x04D8 0x0784 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX                        0x0210 0x04D8 0x074C 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX                        0x0210 0x04D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06                          0x0210 0x04D8 0x05E0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT                           0x0210 0x04D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02                          0x0210 0x04D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5                           0x0214 0x04DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5                           0x0214 0x04DC 0x0788 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX                        0x0214 0x04DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX                        0x0214 0x04DC 0x074C 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07                          0x0214 0x04DC 0x05E4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN                            0x0214 0x04DC 0x0738 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31                          0x0214 0x04DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6                           0x0218 0x04E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6                           0x0218 0x04E0 0x078C 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS                       0x0218 0x04E0 0x0748 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS                       0x0218 0x04E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08                          0x0218 0x04E0 0x05E8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA6__SD2_WP                              0x0218 0x04E0 0x077C 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29                          0x0218 0x04E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7                           0x021C 0x04E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7                           0x021C 0x04E4 0x0790 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS                       0x021C 0x04E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS                       0x021C 0x04E4 0x0748 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09                          0x021C 0x04E4 0x05EC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B                            0x021C 0x04E4 0x0778 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00                          0x021C 0x04E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__SD3_CLK                               0x0220 0x04E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS                             0x0220 0x04E8 0x0588 0x1 0x0
+#define MX6SLL_PAD_SD3_CLK__KEY_COL5                              0x0220 0x04E8 0x0694 0x2 0x0
+#define MX6SLL_PAD_SD3_CLK__CSI_DATA10                            0x0220 0x04E8 0x05B0 0x3 0x0
+#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB                     0x0220 0x04E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18                            0x0220 0x04E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR                          0x0220 0x04E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_CMD__SD3_CMD                               0x0224 0x04EC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CMD__AUD5_RXC                              0x0224 0x04EC 0x0584 0x1 0x0
+#define MX6SLL_PAD_SD3_CMD__KEY_ROW5                              0x0224 0x04EC 0x06B4 0x2 0x0
+#define MX6SLL_PAD_SD3_CMD__CSI_DATA11                            0x0224 0x04EC 0x05B4 0x3 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID                           0x0224 0x04EC 0x0560 0x4 0x1
+#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21                            0x0224 0x04EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR                          0x0224 0x04EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0                           0x0228 0x04F0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD                            0x0228 0x04F0 0x057C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA0__KEY_COL6                            0x0228 0x04F0 0x0698 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12                          0x0228 0x04F0 0x05B8 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID                         0x0228 0x04F0 0x055C 0x4 0x1
+#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19                          0x0228 0x04F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1                           0x022C 0x04F4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC                            0x022C 0x04F4 0x058C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6                            0x022C 0x04F4 0x06B8 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13                          0x022C 0x04F4 0x05BC 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT                         0x022C 0x04F4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20                          0x022C 0x04F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B                           0x022C 0x04F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2                           0x0230 0x04F8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS                           0x0230 0x04F8 0x0590 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA2__KEY_COL7                            0x0230 0x04F8 0x069C 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14                          0x0230 0x04F8 0x05C0 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT                           0x0230 0x04F8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16                          0x0230 0x04F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC                         0x0230 0x04F8 0x0768 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3                           0x0234 0x04FC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD                            0x0234 0x04FC 0x0580 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7                            0x0234 0x04FC 0x06BC 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15                          0x0234 0x04FC 0x05C4 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT                           0x0234 0x04FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17                          0x0234 0x04FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC                         0x0234 0x04FC 0x076C 0x6 0x0
+#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE                         0x0238 0x0500 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS                          0x0238 0x0500 0x05A0 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0                         0x0238 0x0500 0x065C 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1                       0x0238 0x0500 0x0670 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20                         0x0238 0x0500 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE                         0x023C 0x0504 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC                           0x023C 0x0504 0x059C 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK                        0x023C 0x0504 0x0650 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2                       0x023C 0x0504 0x0674 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21                         0x023C 0x0504 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE                         0x0240 0x0508 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD                           0x0240 0x0508 0x0594 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI                        0x0240 0x0508 0x0658 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1                       0x0240 0x0508 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19                         0x0240 0x0508 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC                           0x0244 0x050C 0x05A4 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO                        0x0244 0x050C 0x0654 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2                       0x0244 0x050C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25                         0x0244 0x050C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS                          0x0248 0x0510 0x05A8 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1                         0x0248 0x0510 0x0660 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3                       0x0248 0x0510 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18                         0x0248 0x0510 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD                           0x024C 0x0514 0x0598 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2                         0x024C 0x0514 0x0664 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN                          0x024C 0x0514 0x0678 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24                         0x024C 0x0514 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT                      0x0250 0x0518 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET                          0x0250 0x0518 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET                          0x0250 0x0518 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23                         0x0250 0x0518 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID                        0x0254 0x051C 0x055C 0x2 0x2
+#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT                        0x0254 0x051C 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT                        0x0254 0x051C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17                         0x0254 0x051C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN                           0x0258 0x0520 0x0738 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD1_WP                             0x0258 0x0520 0x0774 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD3_WP                             0x0258 0x0520 0x0794 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22                         0x0258 0x0520 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT                          0x025C 0x0524 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B                           0x025C 0x0524 0x0770 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B                           0x025C 0x0524 0x0780 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16                         0x025C 0x0524 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B                            0x0260 0x0528 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT                           0x0260 0x0528 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY                     0x0260 0x0528 0x05AC 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26                         0x0260 0x0528 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK                      0x0260 0x0528 0x073C 0x6 0x0
+
+#endif /* __DTS_IMX6SLL_PINFUNC_H */

arch/arm/boot/dts/imx6sll.dtsi

···
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sll-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1275000
+				792000  1175000
+				396000  1075000
+				198000	975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz      SOC-PU uV */
+				996000          1175000
+				792000          1175000
+				396000          1175000
+				198000		1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL2_PFD2>,
+				 <&clks IMX6SLL_CLK_STEP>,
+				 <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+		};
+	};
+
+	intc: interrupt-controller@a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-ipp-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-ipp-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	tempmon: temperature-sensor {
+		compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpc>;
+		fsl,tempmon = <&anatop>;
+		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+		nvmem-cell-names = "calib", "temp_grade";
+		clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+		};
+
+		L2: l2-cache@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: aips-bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SLL_CLK_OSC>,
+						 <&clks IMX6SLL_CLK_SPDIF>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_IPG>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "dma";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI1>,
+						 <&clks IMX6SLL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI2>,
+						 <&clks IMX6SLL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI3>,
+						 <&clks IMX6SLL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI4>,
+						 <&clks IMX6SLL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart4: serial@2018000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
+						 <&clks IMX6SLL_CLK_UART4_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+						 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@2024000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
+						 <&clks IMX6SLL_CLK_UART2_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi1: ssi-controller@2028000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
+						 <&clks IMX6SLL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi2: ssi-controller@202c000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
+						 <&clks IMX6SLL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi3: ssi-controller@2030000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
+						 <&clks IMX6SLL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				uart3: serial@2034000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-name = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
+						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM1>,
+					 <&clks IMX6SLL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM2>,
+					 <&clks IMX6SLL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM3>,
+					 <&clks IMX6SLL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM4>,
+					 <&clks IMX6SLL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			gpt1: timer@2098000 {
+				compatible = "fsl,imx6sl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
+					 <&clks IMX6SLL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG1>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6sll-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+
+				assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
+				assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sll-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x4000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg_3p0: regulator-3p0@20c8120 {
+					compatible = "fsl,anatop-regulator";
+					reg = <0x20c8120>;
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+			};
+
+			usbphy1: usb-phy@20c9000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usb-phy@20ca000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
+				phy-reg_3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x61>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6sll-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: interrupt-controller@20dc000 {
+				compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6sll-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6sll-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			csi: csi@20e8000 {
+				compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_CSI>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "disp-axi", "csi_mclk", "disp_dcic";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_SDMA>,
+					 <&clks IMX6SLL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				iram = <&ocram>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			lcdif: lcd-controller@20f8000 {
+				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SLL_CLK_LCDIF_APB>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: dcp@20fc000 {
+				compatible = "fsl,imx28-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DCP>;
+				clock-names = "dcp";
+			};
+		};
+
+		aips2: aips-bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
+						"fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: memory-controller@21b0000 {
+				compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			ocotp: ocotp-ctrl@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sll-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_OCOTP>;
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
+					     "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
+					 <&clks IMX6SLL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/imx6sx-nitrogen6sx.dts

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
···
 / {
 	model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
 	compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
-
-	aliases {
-		fb-lcd = &lcdif1;
-		t-lcd = &t_lcd;
-	};
 
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
···
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
-};
-
-&lcdif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif1>;
-	lcd-supply = <&reg_3p3v>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&t_lcd>;
-			t_lcd: t_lcd_default {
-				clock-frequency = <74160000>;
-				hactive = <1280>;
-				vactive = <720>;
-				hback-porch = <220>;
-				hfront-porch = <110>;
-				vback-porch = <20>;
-				vfront-porch = <5>;
-				hsync-len = <40>;
-				vsync-len = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
 };
 
 &pcie {
···
 		fsl,pins = <
 			MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
 			MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_lcdif1: lcdif1grp {
-		fsl,pins = <
-			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
-			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE	0x4001b0b0
-			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC	0x4001b0b0
-			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC	0x4001b0b0
-			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23	0x4001b0b0
 		>;
 	};
 

arch/arm/boot/dts/imx6sx-sdb-reva.dts

···
 			sw4_reg: sw4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
 			};
 
 			swbst_reg: swbst {

arch/arm/boot/dts/imx6sx.dtsi

···
 				198000	    1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6SX_CLK_ARM>,
 				 <&clks IMX6SX_CLK_PLL2_PFD2>,
 				 <&clks IMX6SX_CLK_STEP>,
···
 		compatible = "simple-bus";
 		interrupt-parent = <&gpc>;
 		ranges;
+
+		ocram_s: sram@8f8000 {
+			compatible = "mmio-sram";
+			reg = <0x008f8000 0x4000>;
+			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
+		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
···
 				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x110>;
 					anatop-vol-bit-shift = <8>;
···
 				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2875000>;
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x130>;
 					anatop-vol-bit-shift = <8>;
···
 
 			crypto: caam@2100000 {
 				compatible = "fsl,sec-v4.0";
-				fsl,sec-era = <4>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;

arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts

···
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Express board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+	model = "Digi International ConnectCore 6UL SBC Express.";
+	compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom",
+		     "fsl,imx6ul";
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&ext_3v3>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_master>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	broken-cd;      /* no carrier detect line (use polling) */
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			/* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04        0xb0
+		>;
+	};
+
+	pinctrl_ecspi3_master: ecspi3grp1 {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0 /* Chip Select */
+		>;
+	};
+
+	pinctrl_ecspi3_slave: ecspi3grp2 {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0	0x10b0 /* Chip Select */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x10b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10071
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	/* General purpose pinctrl */
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIOs BANK 3 */
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0xf030
+		>;
+	};
+};

arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi

···
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore 6UL System-On-Module device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/ {
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x4000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&vdda_adc_3v3>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			int_3v3: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <6250>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm_soc_in: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-ramp-delay = <6250>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <925000>;
+				};
+			};
+
+			ext_3v3: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <6250>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr3: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1300000>;
+				};
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vdd_snvs_3v3: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdda_adc_3v3: vldo1 {
+				compatible = "regulator-fixed";
+				regulator-name = "vref-adc-3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo2_ext: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdda_wlan: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_high_in: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_int: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4_ext: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcoin_chg: vcoin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb0b1
+			>;
+		};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+			>;
+		};
+};
+
+&reg_arm {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};

arch/arm/boot/dts/imx6ul-pico-hobbit.dts

···
 	model = "Technexion Pico i.MX6UL Board";
 	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
 
+	/* Will be filled by the bootloader */
 	memory@80000000 {
-		reg = <0x80000000 0x10000000>;
+		reg = <0x80000000 0>;
 	};
 
 	chosen {

arch/arm/boot/dts/imx6ul.dtsi

···
 			device_type = "cpu";
 			reg = <0>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			operating-points = <
 				/* kHz	uV */
 				696000	1275000

arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi

···
 
 &cpu0 {
 	clock-frequency = <792000000>;
-	operating-points = <
-		/* kHz	uV */
-		792000  1225000
-		528000	1175000
-		396000	1025000
-		198000	950000
-	>;
-	fsl,soc-operating-points = <
-		/* KHz	uV */
-		792000  1175000
-		528000	1175000
-		396000	1175000
-		198000	1175000
-	>;
 };
 
 &iomuxc {

arch/arm/boot/dts/imx6ull.dtsi

···
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
 
 #include "imx6ul.dtsi"
 #include "imx6ull-pinfunc.h"
···
 /delete-node/ &uart8;
 /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
 /delete-node/ &crypto;
+
+&cpu0 {
+	operating-points = <
+		/* kHz	uV */
+		900000	1275000
+		792000	1225000
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		900000	1175000
+		792000	1175000
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
 
 / {
 	soc {

arch/arm/boot/dts/imx7d-nitrogen7.dts

···
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
···
 / {
 	model = "Boundary Devices i.MX7 Nitrogen7 Board";
 	compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
-
-	aliases {
-		fb-lcd = &lcdif;
-		t-lcd = &t_lcd;
-	};
 
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
···
 		default-on;
 	};
 
-	backlight-j20 {
+	backlight_lcd: backlight-j20 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
 	};
 
 	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
···
 };
 
 &lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	lcd-supply = <&reg_vref_3v3>;
-	display = <&display0>;
 	status = "okay";
 
-	display0: lcd-display {
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&t_lcd>;
-			t_lcd: t_lcd_default {
-				/* default to Okaya display */
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <40>;
-				hback-porch = <40>;
-				hsync-len = <48>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <3>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
 		};
 	};
 };

arch/arm/boot/dts/imx7d-sdb.dts

···
 	model = "Freescale i.MX7 SabreSD Board";
 	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x80000000>;
 	};
···
 		enable-active-high;
 	};
 
-	reg_can2_3v3: regulator-can2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can2-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
-	};
-
 	reg_vref_1v8: regulator-vref-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vref-1v8";
···
 		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
 	panel {
 		compatible = "innolux,at043tn24";
-		pinctrl-0 = <&pinctrl_backlight>;
-		enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
 		power-supply = <&reg_lcd_3v3>;
 
 		port {
···
 	};
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &iomuxc_lpsr {
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
···
 		>;
 	};
 
-	pinctrl_backlight: backlightgrp {
+	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1		0x110b0
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
 		>;
 	};
 };

arch/arm/boot/dts/imx7d.dtsi

···
 		cpu0: cpu@0 {
 			clock-frequency = <996000000>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {

arch/arm/boot/dts/imx7s.dtsi

···
 
 			crypto: caam@30900000 {
 				compatible = "fsl,sec-v4.0";
-				fsl,sec-era = <8>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x30900000 0x40000>;

arch/arm/boot/dts/ls1021a.dtsi

···
 			device_type = "cpu";
 			reg = <0xf01>;
 			clocks = <&clockgen 1 0>;
+			#cooling-cells = <2>;
 		};
 	};
 

arch/arm/boot/dts/vf610-zii-cfu1.dts

···
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 CFU1 Board";
+	compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <1>;
+		};
+
+		led-fail {
+			label = "zii:red:fail";
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			max-brightness = <1>;
+		};
+
+		led-status {
+			label = "zii:green:status";
+			gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			max-brightness = <1>;
+		};
+
+		led-debug-a {
+			label = "zii:green:debug_a";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			max-brightness = <1>;
+		};
+
+		led-debug-b {
+			label = "zii:green:debug_b";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			max-brightness = <1>;
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		 compatible = "regulator-fixed";
+		 regulator-name = "vcc_3v3_mcu";
+		 regulator-min-microvolt = <3300000>;
+		 regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	status = "okay";
+
+	m25p128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			reg = <0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	pca9554@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	at24c04@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+		label = "nvm";
+	};
+
+	at24c04@54 {
+		compatible = "atmel,24c04";
+		reg = <0x54>;
+		label = "nameplate";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30fe
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+			VF610_PAD_PTE3__GPIO_108		0x31c2
+			VF610_PAD_PTE4__GPIO_109		0x31c2
+			VF610_PAD_PTE5__GPIO_110		0x31c2
+			VF610_PAD_PTE6__GPIO_111		0x31c2
+		>;
+	};
+
+	pinctrl_switch: switch-grp {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x3061
+			VF610_PAD_PTE2__GPIO_107		0x1042
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+};

arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts

···
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SSMB SPU3 board
+ *
+ * SSMB - SPU3 Switch Management Board
+ * SPU - Seat Power Unit
+ *
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SSMB SPU3 Board";
+	compatible = "zii,vf610spu3", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <1>;
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	/*
+	 * Some SPU3s come with SPI-NOR chip DNPed, so we leave this
+	 * node disabled by default and rely on bootloader to enable
+	 * it when appropriate.
+	 */
+	status = "disabled";
+
+	m25p128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6190";
+			pinctrl-0 = <&pinctrl_gpio_switch0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			eeprom-length = <65536>;
+			reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "eth_cu_1000_4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_cu_1000_5";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "eth_cu_1000_6";
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio6: pca9505@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	at24c04@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		label = "nameplate";
+	};
+
+	at24c04@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTE2__GPIO_107		0x31c2
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX		0x21a2
+			VF610_PAD_PTB24__UART1_RX		0x21a1
+		>;
+	};
+};