[ARM] msm: rename ARCH_MSM7X00A to ARCH_MSM

The MSM architecture covers a wider family of chips than just the MSM7X00A.
Move to a more generic name, in perparation for supporting the specific
SoC variants as sub-architectures (ARCH_MSM7X01A, ARCH_MSM722X, etc). This
gives us ARCH_MSM for the (many) common peripherals.

This also removes the unused/obsolete config item MSM7X00A_IDLE.

Signed-off-by: Brian Swetland <[e-mail]>

arch/arm/Kconfig

···
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_MSM7X00A
-	bool "Qualcomm MSM7X00A"
+config ARCH_MSM
+	bool "Qualcomm MSM"
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
-	  Support for Qualcomm MSM7X00A based systems.  This runs on the ARM11
-	  apps processor of the MSM7X00A and depends on a shared memory
+	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
+	  apps processor of the MSM7K and depends on a shared memory
 	  interface to the ARM9 modem processor which runs the baseband stack
 	  and controls some vital subsystems (clock and power control, etc).
-	  <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>
 
 endchoice
 

arch/arm/Makefile

···
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
     plat-$(CONFIG_PLAT_ORION)	   := orion
- machine-$(CONFIG_ARCH_MSM7X00A)   := msm
+ machine-$(CONFIG_ARCH_MSM)	   := msm
  machine-$(CONFIG_ARCH_LOKI)       := loki
  machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
 

arch/arm/configs/msm_defconfig

···
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_MSM7X00A=y
+CONFIG_ARCH_MSM=y
 
 #
 # Boot options

arch/arm/mach-msm/Kconfig

···
-if ARCH_MSM7X00A
+if ARCH_MSM
 
-comment "MSM7X00A Board Type"
-	depends on ARCH_MSM7X00A
+comment "MSM Board Type"
+	depends on ARCH_MSM
 
 config MACH_HALIBUT
-	depends on ARCH_MSM7X00A
+	depends on ARCH_MSM
 	default y
-	bool "Halibut Board (QCT SURF7200A)"
+	bool "Halibut Board (QCT SURF7201A)"
 	help
-	  Support for the Qualcomm SURF7200A eval board.
-
-config MSM7X00A_IDLE
-	depends on ARCH_MSM7X00A
-	default y
-	bool "Idle Support for MSM7X00A"
+	  Support for the Qualcomm SURF7201A eval board.
 
 endif

arch/arm/mm/Kconfig

···
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor"
-	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
 	default y if ARCH_MX3
-	default y if ARCH_MSM7X00A
+	default y if ARCH_MSM
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_NOIFAR