drivers/net: remove all references to obsolete Ethernet-HOWTO

This howto made sense in the 1990s when users had to manually configure
ISA cards with jumpers or vendor utilities, but with the implementation
of PCI it became increasingly less and less relevant, to the point where
it has been well over a decade since I last updated it. And there is
no value in anyone else taking over updating it either.

However the references to it continue to spread as boiler plate text
from one Kconfig file into the next. We are not doing end users any
favours by pointing them at this old document, so lets kill it with
fire, once and for all, to hopefully stop any further spread.

No code is changed in this commit, just Kconfig help text.

Signed-off-by: Paul Gortmaker <[e-mail]>
Signed-off-by: David S. Miller <[e-mail]>

drivers/net/arcnet/Kconfig

···
 	  COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
 	  support" below.
 
-	  You might also want to have a look at the Ethernet-HOWTO, available
-	  from <http://www.tldp.org/docs.html#howto>(even though ARCnet
-	  is not really Ethernet).
-
 	  To compile this driver as a module, choose M here. The module will
 	  be called arcnet.
 

drivers/net/ethernet/3com/Kconfig

···
 	default y
 	depends on ISA || EISA || PCI || PCMCIA
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	depends on (ISA || EISA)
 	---help---
 	  If you have a network (Ethernet) card belonging to the 3Com
-	  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
-	  from <http://www.tldp.org/docs.html#howto>.
+	  EtherLinkIII series, say Y here.
 
 	  If your card is not working you may need to use the DOS
 	  setup disk to disable Plug & Play mode, and to select the default
···
 	depends on ISA && ISA_DMA_API
 	---help---
 	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
-	  network card, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  network card, say Y here.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called 3c515.
···
 	  "Tornado"   (3c905)                                  PCI
 	  "Hurricane" (3c555/3cSOHO)                           PCI
 
-	  If you have such a card, say Y and read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>. More
-	  specific information is in
+	  If you have such a card, say Y here.  More specific information is in
 	  <file:Documentation/networking/vortex.txt> and in the comments at
 	  the beginning of <file:drivers/net/ethernet/3com/3c59x.c>.
 
···
 	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
 	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
 
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card of this type, say Y here.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called typhoon.

drivers/net/ethernet/8390/Kconfig

···
 	default y
 	depends on NET_VENDOR_NATSEMI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	select CRC32
 	---help---
 	  If you want to include a driver to support Nubus or LC-PDS
-	  Ethernet cards using an NS8390 chipset or its equivalent, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  Ethernet cards using an NS8390 chipset or its equivalent, say Y.
 
 config MCF8390
 	tristate "ColdFire NS8390 based Ethernet support"
···
 		    ATARI_ETHERNEC)
 	select CRC32
 	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
-	  without a specific driver are compatible with NE2000.
+	  If you have a network (Ethernet) card of this type, say Y here.
+	  Many Ethernet cards without a specific driver are compatible with
+	  the NE2000.
 
 	  If you have a PCI NE2000 card however, say N here and Y to "PCI
 	  NE2000 and clone support" below.
···
 	  This driver is for NE2000 compatible PCI cards. It will not work
 	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
 	  support" below). If you have a PCI NE2000 network (Ethernet) card,
-	  say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  say Y here.
 
 	  This driver also works for the following NE2000 clone cards:
 	  RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
···
 	depends on ISA
 	select CRC32
 	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card of this type, say Y here.
 
 	  Important: There have been many reports that, with some motherboards
 	  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
···
 	depends on ISA
 	select CRC32
 	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card of this type, say Y here.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called wd.

drivers/net/ethernet/adaptec/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/adi/Kconfig

···
 	depends on BF516 || BF518 || BF526 || BF527 || BF536 || BF537
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
-	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
 
 	  If unsure, say Y.
 

drivers/net/ethernet/agere/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/allwinner/Kconfig

···
 	depends on ARCH_SUNXI
 	---help---
 	  If you have a network (Ethernet) card belonging to this
-	  class, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  class, say Y here.
 
 	  Note that the answer to this question doesn't directly
 	  affect the kernel: saying N will just cause the configurator

drivers/net/ethernet/alteon/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/amd/Kconfig

···
 	select MII
 	---help---
 	  If you have an AMD 8111-based PCI LANCE ethernet card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  answer Y here.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called amd8111e.
···
 	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
 	depends on ISA && ISA_DMA_API && !ARM
 	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
-	  of this type.
+	  If you have a network (Ethernet) card of this type, say Y here.
+	  Some LinkSys cards are of this type.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called lance.  This is recommended.
···
 	select MII
 	---help---
 	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
-	  answer Y here and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  answer Y here.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called pcnet32.
···
 	tristate "NI6510 support"
 	depends on ISA && ISA_DMA_API && !ARM
 	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card of this type, say Y here.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called ni65.

drivers/net/ethernet/apple/Kconfig

···
 	default y
 	depends on (PPC_PMAC && PPC32) || MAC
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	---help---
 	  Support for the onboard AMD 79C940 MACE Ethernet controller used in
 	  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
-	  say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  say Y here.
 
 endif # NET_VENDOR_APPLE

drivers/net/ethernet/arc/Kconfig

···
 	bool "ARC devices"
 	default y
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/atheros/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/broadcom/Kconfig

···
 	select PHYLIB
 	---help---
 	  If you have a network (Ethernet) controller of this type, say Y
-	  or M and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  or M here.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called b44.

drivers/net/ethernet/brocade/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/cadence/Kconfig

···
 	default y
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
-	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
 
 	  If unsure, say Y.
 

drivers/net/ethernet/chelsio/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/cirrus/Kconfig

···
 	default y
 	depends on ISA || EISA || ARM || MAC
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	depends on ISA || EISA || ARM
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards. If you have a
-	  network (Ethernet) card of this type, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto> as well as
+	  network (Ethernet) card of this type, say Y and read the file
 	  <file:Documentation/networking/cs89x0.txt>.
 
 	  To compile this driver as a module, choose M here. The module
···
 	depends on MAC
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards.  If you have a
-	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  Nubus or LC-PDS network (Ethernet) card of this type, say Y here.
 
 	  To compile this driver as a module, choose M here. This module will
 	  be called mac89x0.

drivers/net/ethernet/cisco/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/dec/Kconfig

···
 	default y
 	depends on PCI || EISA || CARDBUS
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/dec/tulip/Kconfig

···
 	  of this type.  (If your card is NOT SMC EtherPower 10/100 PCI
 	  (smc9332dst), you can also try the driver for "Generic DECchip"
 	  cards, below.  However, most people with a network card of this type
-	  will say Y here.) Do read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  will say Y here.)
 
 	  To compile this driver as a module, choose M here. The module will
 	  be called de2104x.
···
 	  of this type.  (If your card is NOT SMC EtherPower 10/100 PCI
 	  (smc9332dst), you can also try the driver for "Generic DECchip"
 	  cards, above.  However, most people with a network card of this type
-	  will say Y here.) Do read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  will say Y here.)
 
 	  To compile this driver as a module, choose M here. The module will
 	  be called tulip.
···
 	---help---
 	  This is support for the DIGITAL series of PCI/EISA Ethernet cards.
 	  These include the DE425, DE434, DE435, DE450 and DE500 models.  If
-	  you have a network card of this type, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. More specific
+	  you have a network card of this type, say Y.  More specific
 	  information is contained in
 	  <file:Documentation/networking/de4x5.txt>.
 

drivers/net/ethernet/dlink/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/emulex/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/faraday/Kconfig

···
 	default y
 	depends on ARM
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/freescale/Kconfig

···
 		   M523x || M527x || M5272 || M528x || M520x || M532x || \
 		   ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM)
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/fujitsu/Kconfig

···
 	default y
 	depends on PCMCIA
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  the questions about Fujitsu cards. If you say Y, you will be asked for

drivers/net/ethernet/hisilicon/Kconfig

···
 	default y
 	depends on ARM
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/hp/Kconfig

···
 	default y
 	depends on ISA || EISA || PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
 	depends on (ISA || EISA || PCI)
 	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card of this type, say Y here.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called hp100.

drivers/net/ethernet/i825xx/Kconfig

···
 	default y
 	depends on NET_VENDOR_INTEL
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question does not directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/ibm/Kconfig

···
 	default y
 	depends on PPC_PSERIES || PPC_DCR || (IBMEBUS && SPARSEMEM)
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/intel/Kconfig

···
 	bool "Intel devices"
 	default y
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/marvell/Kconfig

···
 	default y
 	depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/mellanox/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/micrel/Kconfig

···
 	depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \
 		   (ARM && ARCH_KS8695)
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/microchip/Kconfig

···
 	default y
 	depends on SPI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/moxa/Kconfig

···
 	default y
 	depends on (ARM && ARCH_MOXART)
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/myricom/Kconfig

···
 	default y
 	depends on PCI && INET
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say
-	  Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/natsemi/Kconfig

···
 	bool "National Semi-conductor devices"
 	default y
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	  Support for NatSemi SONIC based Ethernet devices.  This includes
 	  the onboard Ethernet in many Quadras as well as some LC-PDS,
 	  a few Nubus and all known Comm Slot Ethernet cards.  If you have
-	  one of these say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  one of these say Y here.
 
 	  To compile this driver as a module, choose M here. This module will
 	  be called macsonic.

drivers/net/ethernet/neterion/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say
-	  Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/nuvoton/Kconfig

···
 	default y
 	depends on ARM && ARCH_W90X900
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/nvidia/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	tristate "nForce Ethernet support"
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) controller of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) controller of this type, say Y here.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called forcedeth.

drivers/net/ethernet/oki-semi/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/packetengines/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	depends on PCI
 	select MII
 	---help---
-	  If you have a Gigabit Ethernet card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a Gigabit Ethernet card of this type, say Y here.
 
 	  To compile this driver as a module, choose M here. The module will be
 	  called hamachi.

drivers/net/ethernet/pasemi/Kconfig

···
 	default y
 	depends on PPC_PASEMI && PCI && INET
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/qlogic/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/qualcomm/Kconfig

···
 	bool "Qualcomm devices"
 	default y
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/rdc/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/realtek/Kconfig

···
 	default y
 	depends on PCI || (PARPORT && X86)
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	select CRC32
 	---help---
 	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:drivers/net/ethernet/realtek/atp.c> as well as the
-	  Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>,
+	  port. Read the file <file:drivers/net/ethernet/realtek/atp.c>
 	  if you want to use this.  If you intend to use this driver, you
 	  should have said N to the "Parallel printer support", because the two
 	  drivers don't like each other.
···
 	select MII
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL8139C+ chips. If you have one of those, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  the RTL8139C+ chips. If you have one of those, say Y here.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8139cp.  This is recommended.
···
 	select MII
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
-	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+	  the RTL 8129/8130/8139 chips. If you have one of those, say Y here.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8139too.  This is recommended.

drivers/net/ethernet/renesas/Kconfig

···
 	bool "Renesas devices"
 	default y
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/seeq/Kconfig

···
 	default y
 	depends on HAS_IOMEM
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/sgi/Kconfig

···
 	default y
 	depends on (PCI && SGI_IP27) || SGI_IP32
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	select CRC32
 	select MII
 	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card of this type, say Y here.
 
 config SGI_O2MACE_ETH
 	tristate "SGI O2 MACE Fast Ethernet support"

drivers/net/ethernet/silan/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/sis/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/smsc/Kconfig

···
 		   ISA || M32R || MAC || MIPS || MN10300 || NIOS2 || PCI || \
 		   PCMCIA || SUPERH || XTENSA
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	  option if you have a DELL laptop with the docking station, or
 	  another SMC9192/9194 based chipset.  Say Y if you want it compiled
 	  into the kernel, and read the file
-	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
+	  <file:Documentation/networking/smc9.txt>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called smc9194.
···
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
 	  compiled into the kernel, and read the file
-	  <file:Documentation/networking/smc9.txt>  and the Ethernet-HOWTO,
-	  available from  <http://www.tldp.org/docs.html#howto>.
+	  <file:Documentation/networking/smc9.txt>.
 
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
···
 	---help---
 	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
-	  Say Y if you want it compiled into the kernel,
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  Say Y here if you want it compiled into the kernel.
 
 	  This driver is also available as a module. The module will be
 	  called smc911x.  If you want to compile it as a module, say M
···
 	select SMSC_PHY
 	---help---
 	  This is a driver for SMSC's LAN9420 PCI ethernet adapter.
-	  Say Y if you want it compiled into the kernel,
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  Say Y here if you want it compiled into the kernel.
 
 	  This driver is also available as a module. The module will be
 	  called smsc9420.  If you want to compile it as a module, say M

drivers/net/ethernet/stmicro/Kconfig

···
 	default y
 	depends on HAS_IOMEM
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/sun/Kconfig

···
 	default y
 	depends on SUN3 || SBUS || PCI || SUN_LDOMS
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say
-	  Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/tehuti/Kconfig

···
 	default y
 	depends on PCI
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/ti/Kconfig

···
 	default y
 	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
···
 	depends on (PCI || EISA)
 	---help---
 	  If you have a PCI Ethernet network card based on the ThunderLAN chip
-	  which is supported by this driver, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  which is supported by this driver, say Y here.
 
 	  Devices currently supported by this driver are Compaq Netelligent,
 	  Compaq NetFlex and Olicom cards.  Please read the file

drivers/net/ethernet/toshiba/Kconfig

···
 	default y
 	depends on PCI && (PPC_IBM_CELL_BLADE || MIPS) || PPC_PS3
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/tundra/Kconfig

···
 	default y
 	depends on TSI108_BRIDGE
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/via/Kconfig

···
 	bool "VIA devices"
 	default y
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/wiznet/Kconfig

···
 	depends on HAS_IOMEM
 	default y
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/xilinx/Kconfig

···
 	default y
 	depends on PPC || PPC32 || MICROBLAZE || ARCH_ZYNQ
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/xircom/Kconfig

···
 	default y
 	depends on PCMCIA
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all

drivers/net/ethernet/xscale/Kconfig

···
 	depends on NET_VENDOR_INTEL && (ARM && ARCH_IXP4XX && \
 		   IXP4XX_NPE && IXP4XX_QMGR)
 	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
+	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question does not directly affect the
 	  kernel: saying N will just cause the configurator to skip all