clk: tegra: Don't enable PLLE HW sequencer at init

PLLE hardware power sequencer references PEX/SATA UPHY PLL hardware
power sequencers' output to enable/disable PLLE. PLLE hardware power
sequencer has to be enabled only after PEX/SATA UPHY PLL's sequencers
are enabled.

Signed-off-by: JC Kuo <[e-mail]>
Acked-by: Thierry Reding <[e-mail]>
Acked-by: Stephen Boyd <[e-mail]>
Signed-off-by: Thierry Reding <[e-mail]>

drivers/clk/tegra/clk-pll.c

···
 	pll_writel(val, PLLE_SS_CTRL, pll);
 	udelay(1);
 
-	val = pll_readl_misc(pll);
-	val &= ~PLLE_MISC_IDDQ_SW_CTRL;
-	pll_writel_misc(val, pll);
-
-	val = pll_readl(pll->params->aux_reg, pll);
-	val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SS_SEQ_INCLUDE);
-	val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL);
-	pll_writel(val, pll->params->aux_reg, pll);
-	udelay(1);
-	val |= PLLE_AUX_SEQ_ENABLE;
-	pll_writel(val, pll->params->aux_reg, pll);
-
 out:
 	if (pll->lock)
 		spin_unlock_irqrestore(pll->lock, flags);