[PATCH] m68k: Moved initialisation of conswitchp from subarches to global arch setup

Signed-off-by: Kars de Jong <[e-mail]>
Signed-off-by: Al Viro <[e-mail]>
Cc: Roman Zippel <[e-mail]>
Signed-off-by: Andrew Morton <[e-mail]>
Signed-off-by: Linus Torvalds <[e-mail]>

arch/m68k/amiga/config.c

···
   mach_floppy_setup    = amiga_floppy_setup;
 #endif
   mach_reset           = amiga_reset;
-#ifdef CONFIG_DUMMY_CONSOLE
-  conswitchp           = &dummy_con;
-#endif
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
   mach_beep            = amiga_mksound;
 #endif

arch/m68k/apollo/config.c

···
 	mach_set_clock_mmss  = dn_dummy_set_clock_mmss; /* */
 	mach_process_int     = dn_process_int;
 	mach_reset	     = dn_dummy_reset;  /* */
-#ifdef CONFIG_DUMMY_CONSOLE
-        conswitchp           = &dummy_con;
-#endif
 #ifdef CONFIG_HEARTBEAT
 	mach_heartbeat = dn_heartbeat;
 #endif

arch/m68k/atari/config.c

···
 #ifdef CONFIG_ATARI_FLOPPY
     mach_floppy_setup	 = atari_floppy_setup;
 #endif
-#ifdef CONFIG_DUMMY_CONSOLE
-    conswitchp	         = &dummy_con;
-#endif
     mach_max_dma_address = 0xffffff;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
     mach_beep          = atari_mksound;

arch/m68k/hp300/config.c

···
 #ifdef CONFIG_HEARTBEAT
 	mach_heartbeat       = hp300_pulse;
 #endif
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp	     = &dummy_con;
-#endif
 	mach_max_dma_address = 0xffffffff;
 
 	if (hp300_model >= HP_330 && hp300_model <= HP_433S && hp300_model != HP_350) {

arch/m68k/kernel/setup.c

···
 	    }
 	}
 
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
 	switch (m68k_machtype) {
 #ifdef CONFIG_AMIGA
 	    case MACH_AMIGA:

arch/m68k/mac/config.c

···
 	mach_reset           = mac_reset;
 	mach_halt            = mac_poweroff;
 	mach_power_off       = mac_poweroff;
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp	         = &dummy_con;
-#endif
 	mach_max_dma_address = 0xffffffff;
 #if 0
 	mach_debug_init	 = mac_debug_init;

arch/m68k/q40/config.c

···
     mach_heartbeat = q40_heartbeat;
 #endif
     mach_halt = q40_halt;
-#ifdef CONFIG_DUMMY_CONSOLE
-    conswitchp = &dummy_con;
-#endif
 
     /* disable a few things that SMSQ might have left enabled */
     q40_disable_irqs();

arch/m68k/sun3/config.c

···
 	mach_hwclk           =  sun3_hwclk;
 	mach_halt	     =  sun3_halt;
 	mach_get_hardware_list = sun3_get_hardware_list;
-#if defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp	     = &dummy_con;
-#endif
 
 	memory_start = ((((int)&_end) + 0x2000) & ~0x1fff);
 // PROM seems to want the last couple of physical pages. --m

arch/m68k/sun3x/config.c

···
 	mach_get_model       = sun3_get_model;
 	mach_get_hardware_list = sun3x_get_hardware_list;
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp	     = &dummy_con;
-#endif
-
 	sun3_intreg = (unsigned char *)SUN3X_INTREG;
 
 	/* only the serial console is known to work anyway... */