usb: move ehci reg def

prepare x86: usb debug port early console

move ehci struct def to linux/usrb/ehci_def.h from host/ehci.h

Signed-off-by: Yinghai Lu <[e-mail]>
Acked-by: David Brownell <[e-mail]>
Cc: Andrew Morton <[e-mail]>
Cc: Andi Kleen <[e-mail]>
Cc: "Arjan van de Ven" <[e-mail]>
Cc: "Eric W. Biederman" <[e-mail]>
Cc: "Greg KH" <[e-mail]>
Signed-off-by: Ingo Molnar <[e-mail]>

drivers/usb/host/ehci.h

···
 
 /*-------------------------------------------------------------------------*/
 
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
-	/* these fields are specified as 8 and 16 bit registers,
-	 * but some hosts can't perform 8 or 16 bit PCI accesses.
-	 */
-	u32		hc_capbase;
-#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
-#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
-	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
-#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
-#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
-#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
-#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
-
-	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
-#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
-#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
-	u8		portroute [8];	 /* nibbles for routing - offset 0xC */
-} __attribute__ ((packed));
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
-
-	/* USBCMD: offset 0x00 */
-	u32		command;
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
-#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
-#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
-#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
-#define CMD_ASE		(1<<5)		/* async schedule enable */
-#define CMD_PSE		(1<<4)		/* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET	(1<<1)		/* reset HC not bus */
-#define CMD_RUN		(1<<0)		/* start/stop HC */
-
-	/* USBSTS: offset 0x04 */
-	u32		status;
-#define STS_ASS		(1<<15)		/* Async Schedule Status */
-#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
-#define STS_RECL	(1<<13)		/* Reclamation */
-#define STS_HALT	(1<<12)		/* Not running (any reason) */
-/* some bits reserved */
-	/* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA		(1<<5)		/* Interrupted on async advance */
-#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
-#define STS_FLR		(1<<3)		/* frame list rolled over */
-#define STS_PCD		(1<<2)		/* port change detect */
-#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
-#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
-
-	/* USBINTR: offset 0x08 */
-	u32		intr_enable;
-
-	/* FRINDEX: offset 0x0C */
-	u32		frame_index;	/* current microframe number */
-	/* CTRLDSSEGMENT: offset 0x10 */
-	u32		segment;	/* address bits 63:32 if needed */
-	/* PERIODICLISTBASE: offset 0x14 */
-	u32		frame_list;	/* points to periodic list */
-	/* ASYNCLISTADDR: offset 0x18 */
-	u32		async_next;	/* address of next async queue head */
-
-	u32		reserved [9];
-
-	/* CONFIGFLAG: offset 0x40 */
-	u32		configured_flag;
-#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
-
-	/* PORTSC: offset 0x44 */
-	u32		port_status [0];	/* up to N_PORTS */
-/* 31:23 reserved */
-#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
-#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
-#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_LED_OFF	(0<<14)
-#define PORT_LED_AMBER	(1<<14)
-#define PORT_LED_GREEN	(2<<14)
-#define PORT_LED_MASK	(3<<14)
-#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
-#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10))==(1<<10))	/* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_RESET	(1<<8)		/* reset port */
-#define PORT_SUSPEND	(1<<7)		/* suspend port */
-#define PORT_RESUME	(1<<6)		/* resume it */
-#define PORT_OCC	(1<<5)		/* over current change */
-#define PORT_OC		(1<<4)		/* over current active */
-#define PORT_PEC	(1<<3)		/* port enable change */
-#define PORT_PE		(1<<2)		/* port enable */
-#define PORT_CSC	(1<<1)		/* connect status change */
-#define PORT_CONNECT	(1<<0)		/* device connected */
-#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
-} __attribute__ ((packed));
-
-#define USBMODE		0x68		/* USB Device mode */
-#define USBMODE_SDIS	(1<<3)		/* Stream disable */
-#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
-#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
-#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console.  (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
-	u32	control;
-#define DBGP_OWNER	(1<<30)
-#define DBGP_ENABLED	(1<<28)
-#define DBGP_DONE	(1<<16)
-#define DBGP_INUSE	(1<<10)
-#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
-#	define DBGP_ERR_BAD	1
-#	define DBGP_ERR_SIGNAL	2
-#define DBGP_ERROR	(1<<6)
-#define DBGP_GO		(1<<5)
-#define DBGP_OUT	(1<<4)
-#define DBGP_LEN(x)	(((x)>>0)&0x0f)
-	u32	pids;
-#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
-#define DBGP_PID_SET(data,tok)	(((data)<<8)|(tok))
-	u32	data03;
-	u32	data47;
-	u32	address;
-#define DBGP_EPADDR(dev,ep)	(((dev)<<8)|(ep))
-} __attribute__ ((packed));
+#include <linux/usb/ehci_def.h>
 
 /*-------------------------------------------------------------------------*/
 

include/linux/usb/ehci_def.h

···
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_EHCI_DEF_H
+#define __LINUX_USB_EHCI_DEF_H
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+	/* these fields are specified as 8 and 16 bit registers,
+	 * but some hosts can't perform 8 or 16 bit PCI accesses.
+	 */
+	u32		hc_capbase;
+#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
+#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
+	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
+#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
+#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
+#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
+#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
+
+	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
+#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
+#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
+	u8		portroute [8];	 /* nibbles for routing - offset 0xC */
+} __attribute__ ((packed));
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+	/* USBCMD: offset 0x00 */
+	u32		command;
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
+#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
+#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
+#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
+#define CMD_ASE		(1<<5)		/* async schedule enable */
+#define CMD_PSE		(1<<4)		/* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET	(1<<1)		/* reset HC not bus */
+#define CMD_RUN		(1<<0)		/* start/stop HC */
+
+	/* USBSTS: offset 0x04 */
+	u32		status;
+#define STS_ASS		(1<<15)		/* Async Schedule Status */
+#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
+#define STS_RECL	(1<<13)		/* Reclamation */
+#define STS_HALT	(1<<12)		/* Not running (any reason) */
+/* some bits reserved */
+	/* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA		(1<<5)		/* Interrupted on async advance */
+#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
+#define STS_FLR		(1<<3)		/* frame list rolled over */
+#define STS_PCD		(1<<2)		/* port change detect */
+#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
+#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
+
+	/* USBINTR: offset 0x08 */
+	u32		intr_enable;
+
+	/* FRINDEX: offset 0x0C */
+	u32		frame_index;	/* current microframe number */
+	/* CTRLDSSEGMENT: offset 0x10 */
+	u32		segment;	/* address bits 63:32 if needed */
+	/* PERIODICLISTBASE: offset 0x14 */
+	u32		frame_list;	/* points to periodic list */
+	/* ASYNCLISTADDR: offset 0x18 */
+	u32		async_next;	/* address of next async queue head */
+
+	u32		reserved [9];
+
+	/* CONFIGFLAG: offset 0x40 */
+	u32		configured_flag;
+#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
+
+	/* PORTSC: offset 0x44 */
+	u32		port_status [0];	/* up to N_PORTS */
+/* 31:23 reserved */
+#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
+#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
+#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_LED_OFF	(0<<14)
+#define PORT_LED_AMBER	(1<<14)
+#define PORT_LED_GREEN	(2<<14)
+#define PORT_LED_MASK	(3<<14)
+#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
+#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_RESET	(1<<8)		/* reset port */
+#define PORT_SUSPEND	(1<<7)		/* suspend port */
+#define PORT_RESUME	(1<<6)		/* resume it */
+#define PORT_OCC	(1<<5)		/* over current change */
+#define PORT_OC		(1<<4)		/* over current active */
+#define PORT_PEC	(1<<3)		/* port enable change */
+#define PORT_PE		(1<<2)		/* port enable */
+#define PORT_CSC	(1<<1)		/* connect status change */
+#define PORT_CONNECT	(1<<0)		/* device connected */
+#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
+} __attribute__ ((packed));
+
+#define USBMODE		0x68		/* USB Device mode */
+#define USBMODE_SDIS	(1<<3)		/* Stream disable */
+#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
+#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
+#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console.  (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+	u32	control;
+#define DBGP_OWNER	(1<<30)
+#define DBGP_ENABLED	(1<<28)
+#define DBGP_DONE	(1<<16)
+#define DBGP_INUSE	(1<<10)
+#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
+#	define DBGP_ERR_BAD	1
+#	define DBGP_ERR_SIGNAL	2
+#define DBGP_ERROR	(1<<6)
+#define DBGP_GO		(1<<5)
+#define DBGP_OUT	(1<<4)
+#define DBGP_LEN(x)	(((x)>>0)&0x0f)
+	u32	pids;
+#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
+	u32	data03;
+	u32	data47;
+	u32	address;
+#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_EHCI_DEF_H */