ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board

Use MMC multislot structures for Siemens SX1 board

Signed-off-by: Carlos Eduardo Aguiar <[e-mail]>
Signed-off-by: Tony Lindgren <[e-mail]>

arch/arm/mach-omap1/Makefile

···
 obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
-obj-$(CONFIG_MACH_SX1)			+= board-sx1.o
+obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
 
 ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA

arch/arm/mach-omap1/board-sx1-mmc.c

···
+/*
+ * linux/arch/arm/mach-omap1/board-sx1-mmc.c
+ *
+ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
+ * Author: Carlos Eduardo Aguiar <[e-mail]>
+ *
+ * This code is based on linux/arch/arm/mach-omap1/board-h2-mmc.c, which is:
+ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/gpio.h>
+
+#ifdef CONFIG_MMC_OMAP
+static int slot_cover_open;
+static struct device *mmc_device;
+
+static int sx1_mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	int err;
+	u8 dat = 0;
+
+#ifdef CONFIG_MMC_DEBUG
+	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
+		power_on ? "on" : "off", vdd);
+#endif
+
+	if (slot != 0) {
+		dev_err(dev, "No such slot %d\n", slot + 1);
+		return -ENODEV;
+	}
+
+	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	if (err < 0)
+		return err;
+
+	if (power_on)
+		dat |= SOFIA_MMC_POWER;
+	else
+		dat &= ~SOFIA_MMC_POWER;
+
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+
+static int sx1_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
+{
+#ifdef CONFIG_MMC_DEBUG
+	dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
+		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
+#endif
+	if (slot != 0) {
+		dev_err(dev, "No such slot %d\n", slot + 1);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int sx1_mmc_get_cover_state(struct device *dev, int slot)
+{
+	BUG_ON(slot != 0);
+
+	return slot_cover_open;
+}
+
+void sx1_mmc_slot_cover_handler(void *arg, int state)
+{
+	if (mmc_device == NULL)
+		return;
+
+	slot_cover_open = state;
+	omap_mmc_notify_cover_event(mmc_device, 0, state);
+}
+
+static int sx1_mmc_late_init(struct device *dev)
+{
+	int ret = 0;
+
+	mmc_device = dev;
+
+	return ret;
+}
+
+static void sx1_mmc_cleanup(struct device *dev)
+{
+}
+
+static struct omap_mmc_platform_data sx1_mmc_data = {
+	.nr_slots                       = 1,
+	.switch_slot                    = NULL,
+	.init                           = sx1_mmc_late_init,
+	.cleanup                        = sx1_mmc_cleanup,
+	.slots[0]       = {
+		.set_power              = sx1_mmc_set_power,
+		.set_bus_mode           = sx1_mmc_set_bus_mode,
+		.get_ro                 = NULL,
+		.get_cover_state        = sx1_mmc_get_cover_state,
+		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
+					  MMC_VDD_32_33 | MMC_VDD_33_34,
+		.name                   = "mmcblk",
+	},
+};
+
+void __init sx1_mmc_init(void)
+{
+	omap_set_mmc_info(1, &sx1_mmc_data);
+}
+
+#else
+
+void __init sx1_mmc_init(void)
+{
+}
+
+void sx1_mmc_slot_cover_handler(void *arg, int state)
+{
+}
+#endif

arch/arm/mach-omap1/board-sx1.c

···
 #include <asm/arch/keypad.h>
 
 /* Write to I2C device */
-int i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
 {
 	struct i2c_adapter *adap;
 	int err;
···
 }
 
 /* Read from I2C device */
-int i2c_read_byte(u8 devaddr, u8 regoffset, u8 * value)
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
 {
 	struct i2c_adapter *adap;
 	int err;
···
 {
 	if (keylight > SOFIA_MAX_LIGHT_VAL)
 		keylight = SOFIA_MAX_LIGHT_VAL;
-	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
 }
 /* get current keylight intensity */
 int sx1_getkeylight(u8 * keylight)
 {
-	return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
+	return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
 }
 /* set LCD backlight intensity */
 int sx1_setbacklight(u8 backlight)
 {
 	if (backlight > SOFIA_MAX_LIGHT_VAL)
 		backlight = SOFIA_MAX_LIGHT_VAL;
-	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight);
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
+				  backlight);
 }
 /* get current LCD backlight intensity */
 int sx1_getbacklight (u8 * backlight)
 {
-	return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight);
+	return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
+				 backlight);
 }
 /* set LCD backlight power on/off */
 int sx1_setmmipower(u8 onoff)
 {
 	int err;
 	u8 dat = 0;
-	err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
 	if (err < 0)
 		return err;
 	if (onoff)
 		dat |= SOFIA_MMILIGHT_POWER;
 	else
 		dat &= ~SOFIA_MMILIGHT_POWER;
-	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
 }
-/* set MMC power on/off */
-int sx1_setmmcpower(u8 onoff)
-{
-	int err;
-	u8 dat = 0;
-	err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
-	if (err < 0)
-		return err;
-	if (onoff)
-		dat |= SOFIA_MMC_POWER;
-	else
-		dat &= ~SOFIA_MMC_POWER;
-	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
-}
+
 /* set USB power on/off */
 int sx1_setusbpower(u8 onoff)
 {
 	int err;
 	u8 dat = 0;
-	err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
 	if (err < 0)
 		return err;
 	if (onoff)
 		dat |= SOFIA_USB_POWER;
 	else
 		dat &= ~SOFIA_USB_POWER;
-	return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
 }
 
 EXPORT_SYMBOL(sx1_setkeylight);
···
 EXPORT_SYMBOL(sx1_setbacklight);
 EXPORT_SYMBOL(sx1_getbacklight);
 EXPORT_SYMBOL(sx1_setmmipower);
-EXPORT_SYMBOL(sx1_setmmcpower);
 EXPORT_SYMBOL(sx1_setusbpower);
 
 /*----------- Keypad -------------------------*/
···
 	omap_board_config = sx1_config;
 	omap_board_config_size = ARRAY_SIZE(sx1_config);
 	omap_serial_init();
+	sx1_mmc_init();
 
 	/* turn on USB power */
 	/* sx1_setusbpower(1); cant do it here because i2c is not ready */

include/asm-arm/arch-omap/board-sx1.h

···
 
 int sx1_setmmipower(u8 onoff);
 int sx1_setusbpower(u8 onoff);
-int sx1_setmmcpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
 
 #endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */