arm/arm64: dts: arm: Use generic clock and regulator nodenames

With the recent defining of preferred naming for fixed clock and
regulator nodes, convert the Arm Ltd. boards to use the preferred
names. In the cases which had a unit-address, warnings about missing
"reg" property are fixed.

Signed-off-by: Rob Herring (Arm) <[e-mail]>
Reviewed-by: Linus Walleij <[e-mail]>
Reviewed-by: Sudeep Holla <[e-mail]>
Link: https://lore.kernel.org/[e-mail]
Signed-off-by: Linus Walleij <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Arnd Bergmann <[e-mail]>

arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi

···
 
 / {
 	/* Introduce a fixed regulator for the new ethernet controller */
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;

arch/arm/boot/dts/arm/arm-realview-eb.dtsi

···
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
···
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
···
 	};
 
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;

arch/arm/boot/dts/arm/arm-realview-pb1176.dts

···
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
···
 	};
 
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;

arch/arm/boot/dts/arm/arm-realview-pb11mp.dts

···
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
···
 	};
 
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;

arch/arm/boot/dts/arm/arm-realview-pbx.dtsi

···
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
···
 	};
 
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;

arch/arm/boot/dts/arm/integratorap-im-pd1.dts

···
 	};
 
 	/* Also used for the Smart Card Interface SCI */
-	impd1_uartclk: clock@1_4 {
+	impd1_uartclk: clock-uart {
 		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
 		clock-div = <4>;
···
 	};
 
 	/* For the SSP the clock is divided by 64 */
-	impd1_sspclk: clock@1_64 {
+	impd1_sspclk: clock-ssp {
 		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
 		clock-div = <64>;

arch/arm/boot/dts/arm/integratorap.dts

···
 	};
 
 	/* The UART clock is 14.74 MHz divided by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
···
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;

arch/arm/boot/dts/arm/integratorcp.dts

···
 	 */
 
 	/* The codec chrystal operates at 24.576 MHz */
-	xtal_codec: xtal24.576@24.576M {
+	xtal_codec: clock-24576000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24576000>;
 	};
 
 	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
-	aaci_bitclk: aaci_bitclk@12.288M {
+	aaci_bitclk: clock-12288000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <2>;
···
 	};
 
 	/* This is a 25MHz chrystal on the base board */
-	xtal25mhz: xtal25mhz@25M {
+	xtal25mhz: clock-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <25000000>;
 	};
 
 	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
 	};
 
 	/* Actually sysclk I think */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
···
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
···
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;

arch/arm/boot/dts/arm/mps2.dtsi

···
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	oscclk0: clk-osc0 {
+	oscclk0: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 	};
 
-	oscclk1: clk-osc1 {
+	oscclk1: clock-24576000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24576000>;
 	};
 
-	oscclk2: clk-osc2 {
+	oscclk2: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	cfgclk: clk-cfg {
+	cfgclk: clock-5000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <5000000>;
 	};
 
-	spicfgclk: clk-spicfg {
+	spicfgclk: clock-75000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <75000000>;
···
 		clock-mult = <1>;
 	};
 
-	audmclk: clk-audm {
+	audmclk: clk-12388000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
···
 		clock-mult = <1>;
 	};
 
-	audsclk: clk-auds {
+	audsclk: clk-3072000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;

arch/arm/boot/dts/arm/versatile-ab.dts

···
 		reg = <0x0 0x08000000>;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
···
 		};
 
 		/* OSC1 on AB, OSC4 on PB */
-		osc1: cm_aux_osc@24M {
+		osc1: clock-osc {
 			#clock-cells = <0>;
 			compatible = "arm,versatile-cm-auxosc";
 			clocks = <&xtal24mhz>;
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
···
 			clocks = <&xtal24mhz>;
 		};
 
-		pclk: pclk@24M {
+		pclk: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <1>;

arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi

···
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
-	v2m_fixed_3v3: fixed-regulator-0 {
+	v2m_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
···
 		regulator-always-on;
 	};
 
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;

arch/arm/boot/dts/arm/vexpress-v2m.dtsi

···
 				};
 			};
 
-			v2m_fixed_3v3: fixed-regulator-0 {
+			v2m_fixed_3v3: regulator-3v3 {
 				compatible = "regulator-fixed";
 				regulator-name = "3V3";
 				regulator-min-microvolt = <3300000>;
···
 				regulator-always-on;
 			};
 
-			v2m_clk24mhz: clk24mhz {
+			v2m_clk24mhz: clock-24000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <24000000>;
 				clock-output-names = "v2m:clk24mhz";
 			};
 
-			v2m_refclk1mhz: refclk1mhz {
+			v2m_refclk1mhz: clock-1000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <1000000>;
 				clock-output-names = "v2m:refclk1mhz";
 			};
 
-			v2m_refclk32khz: refclk32khz {
+			v2m_refclk32khz: clock-32768 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <32768>;
···
 				compatible = "arm,vexpress,config-bus";
 				arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-				oscclk0 {
+				clock-controller-0 {
 					/* MCC static memory clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 0>;
···
 					clock-output-names = "v2m:oscclk0";
 				};
 
-				v2m_oscclk1: oscclk1 {
+				v2m_oscclk1: clock-controller-1 {
 					/* CLCD clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 1>;
···
 					clock-output-names = "v2m:oscclk1";
 				};
 
-				v2m_oscclk2: oscclk2 {
+				v2m_oscclk2: clock-controller-2 {
 					/* IO FPGA peripheral clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 2>;
···
 					clock-output-names = "v2m:oscclk2";
 				};
 
-				volt-vio {
+				regulator-vio {
 					/* Logic level voltage */
 					compatible = "arm,vexpress-volt";
 					arm,vexpress-sysreg,func = <2 0>;

arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts

···
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* CPU PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
···
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
···
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
···
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
···
 			clock-output-names = "oscclk6";
 		};
 
-		sys_pll: oscclk7 {
+		sys_pll: clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
···
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
···
 			clock-output-names = "oscclk8";
 		};
 
-		volt-cores {
+		regulator-cores {
 			/* CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;

arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts

···
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* A15 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
···
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk1 {
+		clock-controller-1 {
 			/* A15 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
···
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* A7 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
···
 			clock-output-names = "oscclk2";
 		};
 
-		oscclk3 {
+		clock-controller-3 {
 			/* A7 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
···
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* External AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
···
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
···
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* Static memory controller clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
···
 			clock-output-names = "oscclk6";
 		};
 
-		oscclk7 {
+		clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
···
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
···
 			clock-output-names = "oscclk8";
 		};
 
-		volt-a15 {
+		regulator-a15 {
 			/* A15 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
···
 			label = "A15 Vcore";
 		};
 
-		volt-a7 {
+		regulator-a7 {
 			/* A7 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;

arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts

···
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		cpu_clk: oscclk0 {
+		cpu_clk: clock-controller-0 {
 			/* CPU and internal AXI reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
···
 			clock-output-names = "oscclk0";
 		};
 
-		axi_clk: oscclk1 {
+		axi_clk: clock-controller-1 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
···
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* DDR2 */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
···
 			clock-output-names = "oscclk2";
 		};
 
-		hdlcd_clk: oscclk3 {
+		hdlcd_clk: clock-controller-3 {
 			/* HDLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
···
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* Test chip gate configuration */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
···
 			clock-output-names = "oscclk4";
 		};
 
-		smbclk: oscclk5 {
+		smbclk: clock-controller-5 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;

arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts

···
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0: extsaxiclk {
+		oscclk0: clock-controller-0 {
 			/* ACLK clock to the AXI master port on the test chip */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
···
 			clock-output-names = "extsaxiclk";
 		};
 
-		oscclk1: clcdclk {
+		oscclk1: clock-controller-1 {
 			/* Reference clock for the CLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
···
 			clock-output-names = "clcdclk";
 		};
 
-		smbclk: oscclk2: tcrefclk {
+		smbclk: oscclk2: clock-controller-2 {
 			/* Reference clock for the test chip internal PLLs */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
···
 			clock-output-names = "tcrefclk";
 		};
 
-		volt-vd10 {
+		regulator-vd10 {
 			/* Test Chip internal logic voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
···
 			label = "VD10";
 		};
 
-		volt-vd10-s2 {
+		regulator-vd10-s2 {
 			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
···
 			label = "VD10_S2";
 		};
 
-		volt-vd10-s3 {
+		regulator-vd10-s3 {
 			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 2>;
···
 			label = "VD10_S3";
 		};
 
-		volt-vcc1v8 {
+		regulator-vcc1v8 {
 			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 3>;
···
 			label = "VCC1V8";
 		};
 
-		volt-ddr2vtt {
+		regulator-ddr2vtt {
 			/* DDR2 SDRAM VTT termination voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 4>;
···
 			label = "DDR2VTT";
 		};
 
-		volt-vcc3v3 {
+		regulator-vcc3v3 {
 			/* Local board supply for miscellaneous logic external to the Test Chip */
 			arm,vexpress-sysreg,func = <2 5>;
 			compatible = "arm,vexpress-volt";

arch/arm64/boot/dts/arm/corstone1000-fvp.dts

···
 		reg-io-width = <2>;
 	};
 
-	vmmc_v3_3d: fixed_v3_3d {
+	vmmc_v3_3d: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc_supply";
 		regulator-min-microvolt = <3300000>;

arch/arm64/boot/dts/arm/corstone1000.dtsi

···
 		cache-sets = <1024>;
 	};
 
-	refclk100mhz: refclk100mhz {
+	refclk100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "apb_pclk";
 	};
 
-	smbclk: refclk24mhzx2 {
+	smbclk: clock-48000000 {
 		/* Reference 24MHz clock x 2 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
···
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	uartclk: uartclk {
+	uartclk: clock-50000000 {
 		/* UART clock - 50MHz */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;

arch/arm64/boot/dts/arm/foundation-v8.dtsi

···
 		timeout-sec = <30>;
 	};
 
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;

arch/arm64/boot/dts/arm/juno-clocks.dtsi

···
  */
 / {
 	/* SoC fixed clocks */
-	soc_uartclk: refclk7372800hz {
+	soc_uartclk: clock-7372800 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <7372800>;
 		clock-output-names = "juno:uartclk";
 	};
 
-	soc_usb48mhz: clk48mhz {
+	soc_usb48mhz: clock-48000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 		clock-output-names = "clk48mhz";
 	};
 
-	soc_smc50mhz: clk50mhz {
+	soc_smc50mhz: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "smc_clk";
 	};
 
-	soc_refclk100mhz: refclk100mhz {
+	soc_refclk100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "apb_pclk";
 	};
 
-	soc_faxiclk: refclk400mhz {
+	soc_faxiclk: clock-400000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <400000000>;

arch/arm64/boot/dts/arm/juno-motherboard.dtsi

···
  */
 
 / {
-	mb_clk24mhz: clk24mhz {
+	mb_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "juno_mb:clk24mhz";
 	};
 
-	mb_clk25mhz: clk25mhz {
+	mb_clk25mhz: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 		clock-output-names = "juno_mb:clk25mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "juno_mb:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "juno_mb:refclk32khz";
 	};
 
-	mb_fixed_3v3: mcc-sb-3v3 {
+	mb_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "MCC_SB_3V3";
 		regulator-min-microvolt = <3300000>;

arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi

···
  * VEMotherBoard.lisa
  */
 / {
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "v2m:refclk32khz";
 	};
 
-	v2m_fixed_3v3: v2m-3v3 {
+	v2m_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
···
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		v2m_oscclk1: oscclk1 {
+		v2m_oscclk1: clock-controller {
 			/* CLCD clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;

arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts

···
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		smbclk: smclk {
+		smbclk: clock-controller {
 			/* SMC clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
···
 			clock-output-names = "smclk";
 		};
 
-		volt-vio {
+		regulator-vio {
 			/* VIO to expansion board above */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
···
 			regulator-always-on;
 		};
 
-		volt-12v {
+		regulator-12v {
 			/* 12V from power connector J6 */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;