dt-bindings: qcom: Update RPMHPD entries for some SoCs

Update the RPMHPD references with new bindings defined in rpmhpd.h
for Qualcomm SoCs SM8[2345]50.

Signed-off-by: Rohit Agarwal <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Bjorn Andersson <[e-mail]>

Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml

···
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8250-dispcc";
       reg = <0x0af00000 0x10000>;
···
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8250_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...

Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml

···
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     clock-controller@abf0000 {
       compatible = "qcom,sm8350-videocc";
···
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      power-domains = <&rpmhpd SM8350_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml

···
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@ade0000 {
       compatible = "qcom,sm8450-camcc";
       reg = <0xade0000 0x20000>;
···
                <&rpmhcc RPMH_CXO_CLK>,
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      power-domains = <&rpmhpd SM8450_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml

···
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8450-dispcc";
       reg = <0x0af00000 0x10000>;
···
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8450_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...

Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml

···
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     videocc: clock-controller@aaf0000 {
       compatible = "qcom,sm8450-videocc";
       reg = <0x0aaf0000 0x10000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&gcc GCC_VIDEO_AHB_CLK>;
-      power-domains = <&rpmhpd SM8450_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml

···
   - |
     #include <dt-bindings/clock/qcom,sm8550-gcc.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8550-dispcc";
       reg = <0x0af00000 0x10000>;
···
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8550_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...

Documentation/devicetree/bindings/clock/qcom,videocc.yaml

···
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@ab00000 {
       compatible = "qcom,sdm845-videocc";
       reg = <0x0ab00000 0x10000>;
···
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8250_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...

Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml

···
     #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8250-dpu";
···
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8250_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;

Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml

···
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8250-mdss";
···
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
···
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
···
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";

Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml

···
     #include <dt-bindings/clock/qcom,gcc-sm8350.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8350.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8350-dpu";
···
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8350_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;

Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml

···
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8350.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8350-mdss";
···
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8350_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
···
                                  <&mdss_dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8350_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&mdss_dsi0_phy>;
 

Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml

···
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8450.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8450-dpu";
···
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8450_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;

Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml

···
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8450.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8450-mdss";
···
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
···
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
···
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";

Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml

···
     #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
     #include <dt-bindings/clock/qcom,sm8550-gcc.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8550-dpu";
···
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8550_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;

Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml

···
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8550-mdss";
···
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
···
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
···
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";

Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml

···
     #include <dt-bindings/clock/qcom,videocc-sm8250.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
     #include <dt-bindings/clock/qcom,gcc-sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     venus: video-codec@aa00000 {
         compatible = "qcom,sm8250-venus";
···
         interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
         power-domains = <&videocc MVS0C_GDSC>,
                         <&videocc MVS0_GDSC>,
-                        <&rpmhpd SM8250_MX>;
+                        <&rpmhpd RPMHPD_MX>;
         power-domain-names = "venus", "vcodec0", "mx";
 
         clocks = <&gcc GCC_VIDEO_AXI0_CLK>,

Documentation/devicetree/bindings/mmc/sdhci-msm.yaml

···
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     sdhc_2: mmc@8804000 {
       compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
···
       iommus = <&apps_smmu 0x4a0 0x0>;
       qcom,dll-config = <0x0007642c>;
       qcom,ddr-config = <0x80040868>;
-      power-domains = <&rpmhpd SM8250_CX>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
 
       operating-points-v2 = <&sdhc2_opp_table>;
 

Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml

···
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/mailbox/qcom-ipcc.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     remoteproc@30000000 {
         compatible = "qcom,sm8450-adsp-pas";
···
 
         memory-region = <&adsp_mem>;
 
-        power-domains = <&rpmhpd SM8450_LCX>,
-                        <&rpmhpd SM8450_LMX>;
+        power-domains = <&rpmhpd RPMHPD_LCX>,
+                        <&rpmhpd RPMHPD_LMX>;
         power-domain-names = "lcx", "lmx";
 
         qcom,qmp = <&aoss_qmp>;