dma: ti: Add PSIL data for AM62x DMASS

Add PSIL data for AM62x SoC.

Signed-off-by: Vignesh Raghavendra <[e-mail]>

drivers/dma/ti/Makefile

···
 k3-psil-data-$(CONFIG_SOC_K3_J721E) += k3-psil-j721e.o
 k3-psil-data-$(CONFIG_SOC_K3_J721S2) += k3-psil-j721s2.o
 k3-psil-data-$(CONFIG_SOC_K3_AM642) += k3-psil-am64.o
+k3-psil-data-$(CONFIG_SOC_K3_AM625) += k3-psil-am62.o

drivers/dma/ti/k3-psil-am62.c

···
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_ETHERNET(x, ch, flow_base, flow_cnt)		\
+	{							\
+		.thread_id = x,					\
+		.ep_config = {					\
+			.ep_type = PSIL_EP_NATIVE,		\
+			.pkt_mode = 1,				\
+			.needs_epib = 1,			\
+			.psd_size = 16,				\
+			.mapped_channel_id = ch,		\
+			.flow_start = flow_base,		\
+			.flow_num = flow_cnt,			\
+			.default_flow_id = flow_base,		\
+		},						\
+	}
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+static struct psil_ep am62_src_ep_map[] = {
+	/* CPSW3G */
+	PSIL_ETHERNET(0x4600, 19, 19, 16),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+static struct psil_ep am62_dst_ep_map[] = {
+	/* CPSW3G */
+	PSIL_ETHERNET(0xc600, 19, 19, 8),
+	PSIL_ETHERNET(0xc601, 20, 27, 8),
+	PSIL_ETHERNET(0xc602, 21, 35, 8),
+	PSIL_ETHERNET(0xc603, 22, 43, 8),
+	PSIL_ETHERNET(0xc604, 23, 51, 8),
+	PSIL_ETHERNET(0xc605, 24, 59, 8),
+	PSIL_ETHERNET(0xc606, 25, 67, 8),
+	PSIL_ETHERNET(0xc607, 26, 75, 8),
+};
+
+struct psil_ep_map am62_ep_map = {
+	.name = "am62",
+	.src = am62_src_ep_map,
+	.src_count = ARRAY_SIZE(am62_src_ep_map),
+	.dst = am62_dst_ep_map,
+	.dst_count = ARRAY_SIZE(am62_dst_ep_map),
+};

drivers/dma/ti/k3-psil-priv.h

···
 extern struct psil_ep_map j721e_ep_map;
 extern struct psil_ep_map j721s2_ep_map;
 extern struct psil_ep_map am64_ep_map;
+extern struct psil_ep_map am62_ep_map;
 
 #endif /* K3_PSIL_PRIV_H_ */

drivers/dma/ti/k3-psil.c

···
 			soc_ep_map = &j721s2_ep_map;
 		else if (IS_ENABLED(CONFIG_SOC_K3_AM642))
 			soc_ep_map = &am64_ep_map;
+		else if (IS_ENABLED(CONFIG_SOC_K3_AM625))
+			soc_ep_map = &am62_ep_map;
 	}
 
 	if (thread_id & K3_PSIL_DST_THREAD_ID_OFFSET && soc_ep_map->dst) {