feat(anemone): increase upload limit

hosts/anemone/default.nix

···
 in {
   imports = [
     ./hardware.nix
-    ./klipper.nix
     ./mainsail.nix
     ./moonraker.nix
+    ./klipper
     inputs.nixos-hardware.nixosModules.raspberry-pi-3
     (modulesPath + "/installer/scan/not-detected.nix")
     (modulesPath + "/installer/sd-card/sd-image-aarch64.nix")

hosts/anemone/klipper.nix

···
-{
-  services.klipper = {
-    enable = true;
-    # user = "klipper";
-    # group = "klipper";
-    configFile = ./printer.cfg;
-  };
-}

hosts/anemone/klipper/default.nix

···
+{pkgs, ...}: let
+  mainsail-config = pkgs.fetchFromGitHub {
+    owner = "mainsail-crew";
+    repo = "mainsail-config";
+    rev = "ff3869a621db17ce3ef660adbbd3fa321995ac42";
+    hash = "sha256-gDMAUDqf8no66Jc/jutFNwu7RbD+/qD/6Q6GLWOAA/k=";
+  };
+in {
+  services.klipper = {
+    enable = true;
+    # user = "klipper";
+    # group = "klipper";
+    # configDir =
+
+    configFile = pkgs.writeText "klipper.cfg" ''
+      [include ${mainsail-config}/client.cfg]
+      [include ${./printer.cfg}]
+    '';
+
+    # environment.etc
+  };
+}

hosts/anemone/mainsail.nix

···
-{pkgs, ...}: let
-  mainsail-config = pkgs.fetchFromGitHub {
-    owner = "mainsail-crew";
-    repo = "mainsail-config";
-    rev = "ff3869a621db17ce3ef660adbbd3fa321995ac42";
-    hash = "sha256-gDMAUDqf8no66Jc/jutFNwu7RbD+/qD/6Q6GLWOAA/k=";
-  };
-in {
+{
   services.mainsail = {
     enable = true;
+    nginx.extraConfig = "client_max_body_size 1000M;";
   };
+
   networking.firewall.allowedTCPPorts = [80];
-  environment.etc."mainsail.cfg".source = "${mainsail-config}/client.cfg";
 }

hosts/anemone/moonraker.nix

···
     address = "0.0.0.0";
     port = 7125;
     settings = {
-      server = {
-        max_upload_size = 32768; # in MB
-      };
+      # server = {
+      #   max_upload_size = 32768; # in MB
+      # };
       octoprint_compat = {};
       history = {};
       authorization = {

hosts/anemone/printer.cfg hosts/anemone/klipper/printer.cfg

···
 
 # See docs/Config_Reference.md for a description of parameters.
 
-[include mainsail.cfg]
-
 [stepper_x]
 step_pin: PC2
 dir_pin: PB9