Something went wrong. Try again.
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158# This file holds defaults for most the tests. It defines the options that# are most common to tests that are likely to be shared.## Note, after including this file, a config file may override any option# with a DEFAULTS OVERRIDE section.#
# For those cases that use the same machine to boot a 64 bit# and a 32 bit version. The MACHINE is the DNS name to get to the# box (usually different if it was 64 bit or 32 bit) but the# BOX here is defined as a variable that will be the name of the box# itself. It is useful for calling scripts that will power cycle# the box, as only one script needs to be created to power cycle# even though the box itself has multiple operating systems on it.# By default, BOX and MACHINE are the same.
DEFAULTS IF NOT DEFINED BOXBOX := ${MACHINE}
# Consider each box as 64 bit box, unless the config including this file# has defined BITS = 32
DEFAULTS IF NOT DEFINED BITSBITS := 64
DEFAULTS
# THIS_DIR is used through out the configs and defaults to ${PWD} which# is the directory that ktest.pl was called from.
THIS_DIR := ${PWD}
# to organize your configs, having each machine save their configs# into a separate directly is useful.CONFIG_DIR := ${THIS_DIR}/configs/${MACHINE}
# Reset the log before running each test.CLEAR_LOG = 1
# As installing kernels usually requires root privilege, default the# user on the target as root. It is also required that the target# allows ssh to root from the host without asking for a password.
SSH_USER = root
# For accessing the machine, we will ssh to root@machine.SSH := ssh ${SSH_USER}@${MACHINE}
# Update this. The default here is ktest will ssh to the target box# and run a script called 'run-test' located on that box.TEST = ${SSH} run-test
# Point build dir to the git repo you useBUILD_DIR = ${THIS_DIR}/linux.git
# Each machine will have its own output build directory.OUTPUT_DIR = ${THIS_DIR}/build/${MACHINE}
# Yes this config is focused on x86 (but ktest works for other archs too)BUILD_TARGET = arch/x86/boot/bzImageTARGET_IMAGE = /boot/vmlinuz-test
# have directory for the scripts to reboot and power cycle the boxesSCRIPTS_DIR := ${THIS_DIR}/scripts
# You can have each box/machine have a script to power cycle it.# Name your script <box>-cycle.POWER_CYCLE = ${SCRIPTS_DIR}/${BOX}-cycle
# This script is used to power off the box.POWER_OFF = ${SCRIPTS_DIR}/${BOX}-poweroff
# Keep your test kernels separate from your other kernels.LOCALVERSION = -test
# The /boot/grub/menu.lst is searched for the line:# title Test Kernel# and ktest will use that kernel to reboot into.# For grub2 or other boot loaders, you need to set BOOT_TYPE# to 'script' and define other ways to load the kernel.# See snowball.conf example.#GRUB_MENU = Test Kernel
# The kernel build will use this option.BUILD_OPTIONS = -j8
# Keeping the log file with the output dir is convenient.LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log
# Each box should have their own minum configuration# See min-config.confMIN_CONFIG = ${CONFIG_DIR}/config-min
# For things like randconfigs, there may be configs you find that# are already broken, or there may be some configs that you always# want set. Uncomment ADD_CONFIG and point it to the make config files# that set the configs you want to keep on (or off) in your build.# ADD_CONFIG is usually something to add configs to all machines,# where as, MIN_CONFIG is specific per machine.#ADD_CONFIG = ${THIS_DIR}/config-broken ${THIS_DIR}/config-general
# To speed up reboots for bisects and patchcheck, instead of# waiting 60 seconds for the console to be idle, if this line is# seen in the console output, ktest will know the good kernel has# finished rebooting and it will be able to continue the tests.REBOOT_SUCCESS_LINE = ${MACHINE} login:
# The following is different ways to end the test.# by setting the variable REBOOT to: none, error, fail or# something else, ktest will power cycle or reboot the target box# at the end of the tests.## REBOOT := none# Don't do anything at the end of the test.## REBOOT := error# Reboot the box if ktest detects an error## REBOOT := fail# Do not stop on failure, and after all tests are complete# power off the box (for both success and error)# This is good to run over a weekend and you don't want to waste# electricity.#
DEFAULTS IF ${REBOOT} == noneREBOOT_ON_SUCCESS = 0REBOOT_ON_ERROR = 0POWEROFF_ON_ERROR = 0POWEROFF_ON_SUCCESS = 0
DEFAULTS ELSE IF ${REBOOT} == errorREBOOT_ON_SUCCESS = 0REBOOT_ON_ERROR = 1POWEROFF_ON_ERROR = 0POWEROFF_ON_SUCCESS = 0
DEFAULTS ELSE IF ${REBOOT} == failREBOOT_ON_SUCCESS = 0POWEROFF_ON_ERROR = 1POWEROFF_ON_SUCCESS = 1POWEROFF_AFTER_HALT = 120DIE_ON_FAILURE = 0
# Store the failure information into this directory# such as the .config, dmesg, and build log.STORE_FAILURES = ${THIS_DIR}/failures
DEFAULTS ELSEREBOOT_ON_SUCCESS = 1REBOOT_ON_ERROR = 1POWEROFF_ON_ERROR = 0POWEROFF_ON_SUCCESS = 0