Something went wrong. Try again.
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378// SPDX-License-Identifier: GPL-2.0/* * Kernel internal schedule timeout and sleeping functions */
#include <linux/delay.h>#include <linux/jiffies.h>#include <linux/timer.h>#include <linux/sched/signal.h>#include <linux/sched/debug.h>
#include "tick-internal.h"
/* * Since schedule_timeout()'s timer is defined on the stack, it must store * the target task on the stack as well. */struct process_timer { struct timer_list timer; struct task_struct *task;};
static void process_timeout(struct timer_list *t){ struct process_timer *timeout = timer_container_of(timeout, t, timer);
wake_up_process(timeout->task);}
/** * schedule_timeout - sleep until timeout * @timeout: timeout value in jiffies * * Make the current task sleep until @timeout jiffies have elapsed. * The function behavior depends on the current task state * (see also set_current_state() description): * * %TASK_RUNNING - the scheduler is called, but the task does not sleep * at all. That happens because sched_submit_work() does nothing for * tasks in %TASK_RUNNING state. * * %TASK_UNINTERRUPTIBLE - at least @timeout jiffies are guaranteed to * pass before the routine returns unless the current task is explicitly * woken up, (e.g. by wake_up_process()). * * %TASK_INTERRUPTIBLE - the routine may return early if a signal is * delivered to the current task or the current task is explicitly woken * up. * * The current task state is guaranteed to be %TASK_RUNNING when this * routine returns. * * Specifying a @timeout value of %MAX_SCHEDULE_TIMEOUT will schedule * the CPU away without a bound on the timeout. In this case the return * value will be %MAX_SCHEDULE_TIMEOUT. * * Returns: 0 when the timer has expired otherwise the remaining time in * jiffies will be returned. In all cases the return value is guaranteed * to be non-negative. */signed long __sched schedule_timeout(signed long timeout){ struct process_timer timer; unsigned long expire;
switch (timeout) { case MAX_SCHEDULE_TIMEOUT: /* * These two special cases are useful to be comfortable * in the caller. Nothing more. We could take * MAX_SCHEDULE_TIMEOUT from one of the negative value * but I' d like to return a valid offset (>=0) to allow * the caller to do everything it want with the retval. */ schedule(); goto out; default: /* * Another bit of PARANOID. Note that the retval will be * 0 since no piece of kernel is supposed to do a check * for a negative retval of schedule_timeout() (since it * should never happens anyway). You just have the printk() * that will tell you if something is gone wrong and where. */ if (timeout < 0) { pr_err("%s: wrong timeout value %lx\n", __func__, timeout); dump_stack(); __set_current_state(TASK_RUNNING); goto out; } }
expire = timeout + jiffies;
timer.task = current; timer_setup_on_stack(&timer.timer, process_timeout, 0); timer.timer.expires = expire; add_timer(&timer.timer); schedule(); timer_delete_sync(&timer.timer);
/* Remove the timer from the object tracker */ timer_destroy_on_stack(&timer.timer);
timeout = expire - jiffies;
out: return timeout < 0 ? 0 : timeout;}EXPORT_SYMBOL(schedule_timeout);
/* * __set_current_state() can be used in schedule_timeout_*() functions, because * schedule_timeout() calls schedule() unconditionally. */
/** * schedule_timeout_interruptible - sleep until timeout (interruptible) * @timeout: timeout value in jiffies * * See schedule_timeout() for details. * * Task state is set to TASK_INTERRUPTIBLE before starting the timeout. */signed long __sched schedule_timeout_interruptible(signed long timeout){ __set_current_state(TASK_INTERRUPTIBLE); return schedule_timeout(timeout);}EXPORT_SYMBOL(schedule_timeout_interruptible);
/** * schedule_timeout_killable - sleep until timeout (killable) * @timeout: timeout value in jiffies * * See schedule_timeout() for details. * * Task state is set to TASK_KILLABLE before starting the timeout. */signed long __sched schedule_timeout_killable(signed long timeout){ __set_current_state(TASK_KILLABLE); return schedule_timeout(timeout);}EXPORT_SYMBOL(schedule_timeout_killable);
/** * schedule_timeout_uninterruptible - sleep until timeout (uninterruptible) * @timeout: timeout value in jiffies * * See schedule_timeout() for details. * * Task state is set to TASK_UNINTERRUPTIBLE before starting the timeout. */signed long __sched schedule_timeout_uninterruptible(signed long timeout){ __set_current_state(TASK_UNINTERRUPTIBLE); return schedule_timeout(timeout);}EXPORT_SYMBOL(schedule_timeout_uninterruptible);
/** * schedule_timeout_idle - sleep until timeout (idle) * @timeout: timeout value in jiffies * * See schedule_timeout() for details. * * Task state is set to TASK_IDLE before starting the timeout. It is similar to * schedule_timeout_uninterruptible(), except this task will not contribute to * load average. */signed long __sched schedule_timeout_idle(signed long timeout){ __set_current_state(TASK_IDLE); return schedule_timeout(timeout);}EXPORT_SYMBOL(schedule_timeout_idle);
/** * schedule_hrtimeout_range_clock - sleep until timeout * @expires: timeout value (ktime_t) * @delta: slack in expires timeout (ktime_t) * @mode: timer mode * @clock_id: timer clock to be used * * Details are explained in schedule_hrtimeout_range() function description as * this function is commonly used. */int __sched schedule_hrtimeout_range_clock(ktime_t *expires, u64 delta, const enum hrtimer_mode mode, clockid_t clock_id){ struct hrtimer_sleeper t;
/* * Optimize when a zero timeout value is given. It does not * matter whether this is an absolute or a relative time. */ if (expires && *expires == 0) { __set_current_state(TASK_RUNNING); return 0; }
/* * A NULL parameter means "infinite" */ if (!expires) { schedule(); return -EINTR; }
hrtimer_setup_sleeper_on_stack(&t, clock_id, mode); hrtimer_set_expires_range_ns(&t.timer, *expires, delta); hrtimer_sleeper_start_expires(&t, mode);
if (likely(t.task)) schedule();
hrtimer_cancel(&t.timer); destroy_hrtimer_on_stack(&t.timer);
__set_current_state(TASK_RUNNING);
return !t.task ? 0 : -EINTR;}EXPORT_SYMBOL_GPL(schedule_hrtimeout_range_clock);
/** * schedule_hrtimeout_range - sleep until timeout * @expires: timeout value (ktime_t) * @delta: slack in expires timeout (ktime_t) * @mode: timer mode * * Make the current task sleep until the given expiry time has * elapsed. The routine will return immediately unless * the current task state has been set (see set_current_state()). * * The @delta argument gives the kernel the freedom to schedule the * actual wakeup to a time that is both power and performance friendly * for regular (non RT/DL) tasks. * The kernel give the normal best effort behavior for "@expires+@delta", * but may decide to fire the timer earlier, but no earlier than @expires. * * You can set the task state as follows - * * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to * pass before the routine returns unless the current task is explicitly * woken up, (e.g. by wake_up_process()). * * %TASK_INTERRUPTIBLE - the routine may return early if a signal is * delivered to the current task or the current task is explicitly woken * up. * * The current task state is guaranteed to be TASK_RUNNING when this * routine returns. * * Returns: 0 when the timer has expired. If the task was woken before the * timer expired by a signal (only possible in state TASK_INTERRUPTIBLE) or * by an explicit wakeup, it returns -EINTR. */int __sched schedule_hrtimeout_range(ktime_t *expires, u64 delta, const enum hrtimer_mode mode){ return schedule_hrtimeout_range_clock(expires, delta, mode, CLOCK_MONOTONIC);}EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
/** * schedule_hrtimeout - sleep until timeout * @expires: timeout value (ktime_t) * @mode: timer mode * * See schedule_hrtimeout_range() for details. @delta argument of * schedule_hrtimeout_range() is set to 0 and has therefore no impact. */int __sched schedule_hrtimeout(ktime_t *expires, const enum hrtimer_mode mode){ return schedule_hrtimeout_range(expires, 0, mode);}EXPORT_SYMBOL_GPL(schedule_hrtimeout);
/** * msleep - sleep safely even with waitqueue interruptions * @msecs: Requested sleep duration in milliseconds * * msleep() uses jiffy based timeouts for the sleep duration. Because of the * design of the timer wheel, the maximum additional percentage delay (slack) is * 12.5%. This is only valid for timers which will end up in level 1 or a higher * level of the timer wheel. For explanation of those 12.5% please check the * detailed description about the basics of the timer wheel. * * The slack of timers which will end up in level 0 depends on sleep duration * (msecs) and HZ configuration and can be calculated in the following way (with * the timer wheel design restriction that the slack is not less than 12.5%): * * ``slack = MSECS_PER_TICK / msecs`` * * When the allowed slack of the callsite is known, the calculation could be * turned around to find the minimal allowed sleep duration to meet the * constraints. For example: * * * ``HZ=1000`` with ``slack=25%``: ``MSECS_PER_TICK / slack = 1 / (1/4) = 4``: * all sleep durations greater or equal 4ms will meet the constraints. * * ``HZ=1000`` with ``slack=12.5%``: ``MSECS_PER_TICK / slack = 1 / (1/8) = 8``: * all sleep durations greater or equal 8ms will meet the constraints. * * ``HZ=250`` with ``slack=25%``: ``MSECS_PER_TICK / slack = 4 / (1/4) = 16``: * all sleep durations greater or equal 16ms will meet the constraints. * * ``HZ=250`` with ``slack=12.5%``: ``MSECS_PER_TICK / slack = 4 / (1/8) = 32``: * all sleep durations greater or equal 32ms will meet the constraints. * * See also the signal aware variant msleep_interruptible(). */void msleep(unsigned int msecs){ unsigned long timeout = msecs_to_jiffies(msecs);
while (timeout) timeout = schedule_timeout_uninterruptible(timeout);}EXPORT_SYMBOL(msleep);
/** * msleep_interruptible - sleep waiting for signals * @msecs: Requested sleep duration in milliseconds * * See msleep() for some basic information. * * The difference between msleep() and msleep_interruptible() is that the sleep * could be interrupted by a signal delivery and then returns early. * * Returns: The remaining time of the sleep duration transformed to msecs (see * schedule_timeout() for details). */unsigned long msleep_interruptible(unsigned int msecs){ unsigned long timeout = msecs_to_jiffies(msecs);
while (timeout && !signal_pending(current)) timeout = schedule_timeout_interruptible(timeout); return jiffies_to_msecs(timeout);}EXPORT_SYMBOL(msleep_interruptible);
/** * usleep_range_state - Sleep for an approximate time in a given state * @min: Minimum time in usecs to sleep * @max: Maximum time in usecs to sleep * @state: State of the current task that will be while sleeping * * usleep_range_state() sleeps at least for the minimum specified time but not * longer than the maximum specified amount of time. The range might reduce * power usage by allowing hrtimers to coalesce an already scheduled interrupt * with this hrtimer. In the worst case, an interrupt is scheduled for the upper * bound. * * The sleeping task is set to the specified state before starting the sleep. * * In non-atomic context where the exact wakeup time is flexible, use * usleep_range() or its variants instead of udelay(). The sleep improves * responsiveness by avoiding the CPU-hogging busy-wait of udelay(). */void __sched usleep_range_state(unsigned long min, unsigned long max, unsigned int state){ ktime_t exp = ktime_add_us(ktime_get(), min); u64 delta = (u64)(max - min) * NSEC_PER_USEC;
if (WARN_ON_ONCE(max < min)) delta = 0;
for (;;) { __set_current_state(state); /* Do not return before the requested sleep time has elapsed */ if (!schedule_hrtimeout_range(&exp, delta, HRTIMER_MODE_ABS)) break; }}EXPORT_SYMBOL(usleep_range_state);