Something went wrong. Try again.
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */#ifndef _UAPI_LINUX_FD_H#define _UAPI_LINUX_FD_H
#include <linux/ioctl.h>#include <linux/compiler.h>
/* New file layout: Now the ioctl definitions immediately follow the * definitions of the structures that they use */
/* * Geometry */struct floppy_struct { unsigned int size, /* nr of sectors total */ sect, /* sectors per track */ head, /* nr of heads */ track, /* nr of tracks */ stretch; /* bit 0 !=0 means double track steps */ /* bit 1 != 0 means swap sides */ /* bits 2..9 give the first sector */ /* number (the LSB is flipped) */#define FD_STRETCH 1#define FD_SWAPSIDES 2#define FD_ZEROBASED 4#define FD_SECTBASEMASK 0x3FC#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
unsigned char gap, /* gap1 size */
rate, /* data rate. |= 0x40 for perpendicular */#define FD_2M 0x4#define FD_SIZECODEMASK 0x38#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \ 512 : 128 << FD_SIZECODE(floppy) )#define FD_PERP 0x40
spec1, /* stepping rate, head unload time */ fmt_gap; /* gap2 size */ const char * name; /* used only for predefined formats */};
/* commands needing write access have 0x40 set *//* commands needing super user access have 0x80 set */
#define FDCLRPRM _IO(2, 0x41)/* clear user-defined parameters */
#define FDSETPRM _IOW(2, 0x42, struct floppy_struct)#define FDSETMEDIAPRM FDSETPRM/* set user-defined parameters for current media */
#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)#define FDDEFMEDIAPRM FDDEFPRM#define FDGETMEDIAPRM FDGETPRM/* set/get disk parameters */
#define FDMSGON _IO(2,0x45)#define FDMSGOFF _IO(2,0x46)/* issue/don't issue kernel messages on media type change */
/* * Formatting (obsolete) */#define FD_FILL_BYTE 0xF6 /* format fill byte. */
struct format_descr { unsigned int device,head,track;};
#define FDFMTBEG _IO(2,0x47)/* begin formatting a disk */#define FDFMTTRK _IOW(2,0x48, struct format_descr)/* format the specified track */#define FDFMTEND _IO(2,0x49)/* end formatting a disk */
/* * Error thresholds */struct floppy_max_errors { unsigned int abort, /* number of errors to be reached before aborting */ read_track, /* maximal number of errors permitted to read an * entire track at once */ reset, /* maximal number of errors before a reset is tried */ recal, /* maximal number of errors before a recalibrate is * tried */
/* * Threshold for reporting FDC errors to the console. * Setting this to zero may flood your screen when using * ultra cheap floppies ;-) */ reporting;
};
#define FDSETEMSGTRESH _IO(2,0x4a)/* set fdc error reporting threshold */
#define FDFLUSH _IO(2,0x4b)/* flush buffers for media; either for verifying media, or for * handling a media change without closing the file descriptor */
#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)/* set/get abortion and read_track threshold. See also floppy_drive_params * structure */
typedef char floppy_drive_name[16];#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)/* get drive type: 5 1/4 or 3 1/2 */
/* * Drive parameters (user modifiable) */struct floppy_drive_params { signed char cmos; /* CMOS type */
/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA). */ unsigned long max_dtr; /* Step rate, usec */ unsigned long hlt; /* Head load/settle time, msec */ unsigned long hut; /* Head unload time (remnant of * 8" drives) */ unsigned long srt; /* Step rate, usec */
unsigned long spinup; /* time needed for spinup (expressed * in jiffies) */ unsigned long spindown; /* timeout needed for spindown */ unsigned char spindown_offset; /* decides in which position the disk * will stop */ unsigned char select_delay; /* delay to wait after select */ unsigned char rps; /* rotations per second */ unsigned char tracks; /* maximum number of tracks */ unsigned long timeout; /* timeout for interrupt requests */
unsigned char interleave_sect; /* if there are more sectors, use * interleave */
struct floppy_max_errors max_errors;
char flags; /* various flags, including ftd_msg *//* * Announce successful media type detection and media information loss after * disk changes. * Also used to enable/disable printing of overrun warnings. */
#define FTD_MSG 0x10#define FD_BROKEN_DCL 0x20#define FD_DEBUG 0x02#define FD_SILENT_DCL_CLEAR 0x4#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware considerations */
char read_track; /* use readtrack during probing? */
/* * Auto-detection. Each drive type has eight formats which are * used in succession to try to read the disk. If the FDC cannot lock onto * the disk, the next format is tried. This uses the variable 'probing'. */
#define FD_AUTODETECT_SIZE 8
short autodetect[FD_AUTODETECT_SIZE]; /* autodetected formats */
int checkfreq; /* how often should the drive be checked for disk * changes */ int native_format; /* native format of this drive */};
enum { FD_NEED_TWADDLE_BIT, /* more magic */ FD_VERIFY_BIT, /* inquire for write protection */ FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet * to clear media change status */ FD_UNUSED_BIT, FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */ FD_DISK_WRITABLE_BIT, /* disk is writable */ FD_OPEN_SHOULD_FAIL_BIT};
#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)/* set/get drive parameters */
/* * Current drive state (not directly modifiable by user, readonly) */struct floppy_drive_struct { unsigned long flags;/* values for these flags */#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)#define FD_VERIFY (1 << FD_VERIFY_BIT)#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
unsigned long spinup_date; unsigned long select_date; unsigned long first_read_date; short probed_format; short track; /* current track */ short maxblock; /* id of highest block read */ short maxtrack; /* id of highest half track read */ int generation; /* how many diskchanges? */
/* * (User-provided) media information is _not_ discarded after a media change * if the corresponding keep_data flag is non-zero. Positive values are * decremented after each probe. */ int keep_data;
/* Prevent "aliased" accesses. */ int fd_ref; int fd_device; unsigned long last_checked; /* when was the drive last checked for a disk * change? */
char *dmabuf; int bufblocks;};
#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)/* get drive state: GET returns the cached state, POLL polls for new state */
/* * reset FDC */enum reset_mode { FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */ FD_RESET_IF_RAWCMD, /* obsolete */ FD_RESET_ALWAYS /* reset always */};#define FDRESET _IO(2, 0x54)
/* * FDC state */struct floppy_fdc_state { int spec1; /* spec1 value last used */ int spec2; /* spec2 value last used */ int dtr; unsigned char version; /* FDC version code */ unsigned char dor; unsigned long address; /* io address */ unsigned int rawcmd:2; unsigned int reset:1; unsigned int need_configure:1; unsigned int perp_mode:2; unsigned int has_fifo:1; unsigned int driver_version; /* version code for floppy driver */#define FD_DRIVER_VERSION 0x100/* user programs using the floppy API should use floppy_fdc_state to * get the version number of the floppy driver that they are running * on. If this version number is bigger than the one compiled into the * user program (the FD_DRIVER_VERSION define), it should be prepared * to bigger structures */
unsigned char track[4]; /* Position of the heads of the 4 units attached to this FDC, * as stored on the FDC. In the future, the position as stored * on the FDC might not agree with the actual physical * position of these drive heads. By allowing such * disagreement, it will be possible to reset the FDC without * incurring the expensive cost of repositioning all heads. * Right now, these positions are hard wired to 0. */
};
#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
/* * Asynchronous Write error tracking */struct floppy_write_errors { /* Write error logging. * * These fields can be cleared with the FDWERRORCLR ioctl. * Only writes that were attempted but failed due to a physical media * error are logged. write(2) calls that fail and return an error code * to the user process are not counted. */
unsigned int write_errors; /* number of physical write errors * encountered */
/* position of first and last write errors */ unsigned long first_error_sector; int first_error_generation; unsigned long last_error_sector; int last_error_generation;
unsigned int badness; /* highest retry count for a read or write * operation */};
#define FDWERRORCLR _IO(2, 0x56)/* clear write error and badness information */#define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors)/* get write error and badness information */
/* * Raw commands *//* new interface flag: now we can do them in batches */#define FDHAVEBATCHEDRAWCMD
struct floppy_raw_cmd { unsigned int flags;#define FD_RAW_READ 1#define FD_RAW_WRITE 2#define FD_RAW_NO_MOTOR 4#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */#define FD_RAW_INTR 8 /* wait for an interrupt */#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command * completion */#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */
/* more "in" flags */#define FD_RAW_MORE 0x100 /* more records follow */#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure * detection too */
/* more "out" flags */#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
void __user *data; char *kernel_data; /* location of data buffer in the kernel */ struct floppy_raw_cmd *next; /* used for chaining of raw cmd's * within the kernel */ long length; /* in: length of dma transfer. out: remaining bytes */ long phys_length; /* physical length, if different from dma length */ int buffer_length; /* length of allocated buffer */
unsigned char rate;
#define FD_RAW_CMD_SIZE 16#define FD_RAW_REPLY_SIZE 16#define FD_RAW_CMD_FULLSIZE (FD_RAW_CMD_SIZE + 1 + FD_RAW_REPLY_SIZE)
/* The command may take up the space initially intended for the reply * and the reply count. Needed for long 82078 commands such as RESTORE, * which takes 17 command bytes. */
unsigned char cmd_count; union { struct { unsigned char cmd[FD_RAW_CMD_SIZE]; unsigned char reply_count; unsigned char reply[FD_RAW_REPLY_SIZE]; }; unsigned char fullcmd[FD_RAW_CMD_FULLSIZE]; }; int track; int resultcode;
int reserved1; int reserved2;};
#define FDRAWCMD _IO(2, 0x58)/* send a raw command to the fdc. Structure size not included, because of * batches */
#define FDTWADDLE _IO(2, 0x59)/* flicker motor-on bit before reading a sector. Experimental */
#define FDEJECT _IO(2, 0x5a)/* eject the disk */
#endif /* _UAPI_LINUX_FD_H */