Something went wrong. Try again.
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620/* SPDX-License-Identifier: MIT *//* * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> * Copyright (c) 2007 Jakob Bornecrantz <wallbraker@gmail.com> * Copyright (c) 2008 Red Hat Inc. * Copyright (c) 2007-2008 Tungsten Graphics, Inc., Cedar Park, TX., USA * Copyright (c) 2007-2008 Intel Corporation */
#ifndef _DRM_MODE_H#define _DRM_MODE_H
#include <linux/bits.h>#include <linux/const.h>
#include "drm.h"
#if defined(__cplusplus)extern "C" {#endif
/** * DOC: overview * * DRM exposes many UAPI and structure definitions to have a consistent * and standardized interface with users. * Userspace can refer to these structure definitions and UAPI formats * to communicate to drivers. */
#define DRM_CONNECTOR_NAME_LEN 32#define DRM_DISPLAY_MODE_LEN 32#define DRM_PROP_NAME_LEN 32
#define DRM_MODE_TYPE_BUILTIN (1<<0) /* deprecated */#define DRM_MODE_TYPE_CLOCK_C ((1<<1) | DRM_MODE_TYPE_BUILTIN) /* deprecated */#define DRM_MODE_TYPE_CRTC_C ((1<<2) | DRM_MODE_TYPE_BUILTIN) /* deprecated */#define DRM_MODE_TYPE_PREFERRED (1<<3)#define DRM_MODE_TYPE_DEFAULT (1<<4) /* deprecated */#define DRM_MODE_TYPE_USERDEF (1<<5)#define DRM_MODE_TYPE_DRIVER (1<<6)
#define DRM_MODE_TYPE_ALL (DRM_MODE_TYPE_PREFERRED | \ DRM_MODE_TYPE_USERDEF | \ DRM_MODE_TYPE_DRIVER)
/* Video mode flags *//* bit compatible with the xrandr RR_ definitions (bits 0-13) * * ABI warning: Existing userspace really expects * the mode flags to match the xrandr definitions. Any * changes that don't match the xrandr definitions will * likely need a new client cap or some other mechanism * to avoid breaking existing userspace. This includes * allocating new flags in the previously unused bits! */#define DRM_MODE_FLAG_PHSYNC (1<<0)#define DRM_MODE_FLAG_NHSYNC (1<<1)#define DRM_MODE_FLAG_PVSYNC (1<<2)#define DRM_MODE_FLAG_NVSYNC (1<<3)#define DRM_MODE_FLAG_INTERLACE (1<<4)#define DRM_MODE_FLAG_DBLSCAN (1<<5)#define DRM_MODE_FLAG_CSYNC (1<<6)#define DRM_MODE_FLAG_PCSYNC (1<<7)#define DRM_MODE_FLAG_NCSYNC (1<<8)#define DRM_MODE_FLAG_HSKEW (1<<9) /* hskew provided */#define DRM_MODE_FLAG_BCAST (1<<10) /* deprecated */#define DRM_MODE_FLAG_PIXMUX (1<<11) /* deprecated */#define DRM_MODE_FLAG_DBLCLK (1<<12)#define DRM_MODE_FLAG_CLKDIV2 (1<<13) /* * When adding a new stereo mode don't forget to adjust DRM_MODE_FLAGS_3D_MAX * (define not exposed to user space). */#define DRM_MODE_FLAG_3D_MASK (0x1f<<14)#define DRM_MODE_FLAG_3D_NONE (0<<14)#define DRM_MODE_FLAG_3D_FRAME_PACKING (1<<14)#define DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE (2<<14)#define DRM_MODE_FLAG_3D_LINE_ALTERNATIVE (3<<14)#define DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL (4<<14)#define DRM_MODE_FLAG_3D_L_DEPTH (5<<14)#define DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH (6<<14)#define DRM_MODE_FLAG_3D_TOP_AND_BOTTOM (7<<14)#define DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF (8<<14)
/* Picture aspect ratio options */#define DRM_MODE_PICTURE_ASPECT_NONE 0#define DRM_MODE_PICTURE_ASPECT_4_3 1#define DRM_MODE_PICTURE_ASPECT_16_9 2#define DRM_MODE_PICTURE_ASPECT_64_27 3#define DRM_MODE_PICTURE_ASPECT_256_135 4
/* Content type options */#define DRM_MODE_CONTENT_TYPE_NO_DATA 0#define DRM_MODE_CONTENT_TYPE_GRAPHICS 1#define DRM_MODE_CONTENT_TYPE_PHOTO 2#define DRM_MODE_CONTENT_TYPE_CINEMA 3#define DRM_MODE_CONTENT_TYPE_GAME 4
/* Aspect ratio flag bitmask (4 bits 22:19) */#define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19)#define DRM_MODE_FLAG_PIC_AR_NONE \ (DRM_MODE_PICTURE_ASPECT_NONE<<19)#define DRM_MODE_FLAG_PIC_AR_4_3 \ (DRM_MODE_PICTURE_ASPECT_4_3<<19)#define DRM_MODE_FLAG_PIC_AR_16_9 \ (DRM_MODE_PICTURE_ASPECT_16_9<<19)#define DRM_MODE_FLAG_PIC_AR_64_27 \ (DRM_MODE_PICTURE_ASPECT_64_27<<19)#define DRM_MODE_FLAG_PIC_AR_256_135 \ (DRM_MODE_PICTURE_ASPECT_256_135<<19)
#define DRM_MODE_FLAG_ALL (DRM_MODE_FLAG_PHSYNC | \ DRM_MODE_FLAG_NHSYNC | \ DRM_MODE_FLAG_PVSYNC | \ DRM_MODE_FLAG_NVSYNC | \ DRM_MODE_FLAG_INTERLACE | \ DRM_MODE_FLAG_DBLSCAN | \ DRM_MODE_FLAG_CSYNC | \ DRM_MODE_FLAG_PCSYNC | \ DRM_MODE_FLAG_NCSYNC | \ DRM_MODE_FLAG_HSKEW | \ DRM_MODE_FLAG_DBLCLK | \ DRM_MODE_FLAG_CLKDIV2 | \ DRM_MODE_FLAG_3D_MASK)
/* DPMS flags *//* bit compatible with the xorg definitions. */#define DRM_MODE_DPMS_ON 0#define DRM_MODE_DPMS_STANDBY 1#define DRM_MODE_DPMS_SUSPEND 2#define DRM_MODE_DPMS_OFF 3
/* Scaling mode options */#define DRM_MODE_SCALE_NONE 0 /* Unmodified timing (display or software can still scale) */#define DRM_MODE_SCALE_FULLSCREEN 1 /* Full screen, ignore aspect */#define DRM_MODE_SCALE_CENTER 2 /* Centered, no scaling */#define DRM_MODE_SCALE_ASPECT 3 /* Full screen, preserve aspect */
/* Dithering mode options */#define DRM_MODE_DITHERING_OFF 0#define DRM_MODE_DITHERING_ON 1#define DRM_MODE_DITHERING_AUTO 2
/* Dirty info options */#define DRM_MODE_DIRTY_OFF 0#define DRM_MODE_DIRTY_ON 1#define DRM_MODE_DIRTY_ANNOTATE 2
/* Link Status options */#define DRM_MODE_LINK_STATUS_GOOD 0#define DRM_MODE_LINK_STATUS_BAD 1
/* Panel type property */#define DRM_MODE_PANEL_TYPE_UNKNOWN 0#define DRM_MODE_PANEL_TYPE_OLED 1
/* * DRM_MODE_ROTATE_<degrees> * * Signals that a drm plane is been rotated <degrees> degrees in counter * clockwise direction. * * This define is provided as a convenience, looking up the property id * using the name->prop id lookup is the preferred method. */#define DRM_MODE_ROTATE_0 (1<<0)#define DRM_MODE_ROTATE_90 (1<<1)#define DRM_MODE_ROTATE_180 (1<<2)#define DRM_MODE_ROTATE_270 (1<<3)
/* * DRM_MODE_ROTATE_MASK * * Bitmask used to look for drm plane rotations. */#define DRM_MODE_ROTATE_MASK (\ DRM_MODE_ROTATE_0 | \ DRM_MODE_ROTATE_90 | \ DRM_MODE_ROTATE_180 | \ DRM_MODE_ROTATE_270)
/* * DRM_MODE_REFLECT_<axis> * * Signals that the contents of a drm plane is reflected along the <axis> axis, * in the same way as mirroring. * See kerneldoc chapter "Plane Composition Properties" for more details. * * This define is provided as a convenience, looking up the property id * using the name->prop id lookup is the preferred method. */#define DRM_MODE_REFLECT_X (1<<4)#define DRM_MODE_REFLECT_Y (1<<5)
/* * DRM_MODE_REFLECT_MASK * * Bitmask used to look for drm plane reflections. */#define DRM_MODE_REFLECT_MASK (\ DRM_MODE_REFLECT_X | \ DRM_MODE_REFLECT_Y)
/* Content Protection Flags */#define DRM_MODE_CONTENT_PROTECTION_UNDESIRED 0#define DRM_MODE_CONTENT_PROTECTION_DESIRED 1#define DRM_MODE_CONTENT_PROTECTION_ENABLED 2
/** * struct drm_mode_modeinfo - Display mode information. * @clock: pixel clock in kHz * @hdisplay: horizontal display size * @hsync_start: horizontal sync start * @hsync_end: horizontal sync end * @htotal: horizontal total size * @hskew: horizontal skew * @vdisplay: vertical display size * @vsync_start: vertical sync start * @vsync_end: vertical sync end * @vtotal: vertical total size * @vscan: vertical scan * @vrefresh: approximate vertical refresh rate in Hz * @flags: bitmask of misc. flags, see DRM_MODE_FLAG_* defines * @type: bitmask of type flags, see DRM_MODE_TYPE_* defines * @name: string describing the mode resolution * * This is the user-space API display mode information structure. For the * kernel version see struct drm_display_mode. */struct drm_mode_modeinfo { __u32 clock; __u16 hdisplay; __u16 hsync_start; __u16 hsync_end; __u16 htotal; __u16 hskew; __u16 vdisplay; __u16 vsync_start; __u16 vsync_end; __u16 vtotal; __u16 vscan;
__u32 vrefresh;
__u32 flags; __u32 type; char name[DRM_DISPLAY_MODE_LEN];};
struct drm_mode_card_res { __u64 fb_id_ptr; __u64 crtc_id_ptr; __u64 connector_id_ptr; __u64 encoder_id_ptr; __u32 count_fbs; __u32 count_crtcs; __u32 count_connectors; __u32 count_encoders; __u32 min_width; __u32 max_width; __u32 min_height; __u32 max_height;};
struct drm_mode_crtc { __u64 set_connectors_ptr; __u32 count_connectors;
__u32 crtc_id; /**< Id */ __u32 fb_id; /**< Id of framebuffer */
__u32 x; /**< x Position on the framebuffer */ __u32 y; /**< y Position on the framebuffer */
__u32 gamma_size; __u32 mode_valid; struct drm_mode_modeinfo mode;};
#define DRM_MODE_PRESENT_TOP_FIELD (1<<0)#define DRM_MODE_PRESENT_BOTTOM_FIELD (1<<1)
/* Planes blend with or override other bits on the CRTC */struct drm_mode_set_plane { __u32 plane_id; __u32 crtc_id; __u32 fb_id; /* fb object contains surface format type */ __u32 flags; /* see above flags */
/* Signed dest location allows it to be partially off screen */ __s32 crtc_x; __s32 crtc_y; __u32 crtc_w; __u32 crtc_h;
/* Source values are 16.16 fixed point */ __u32 src_x; __u32 src_y; __u32 src_h; __u32 src_w;};
/** * struct drm_mode_get_plane - Get plane metadata. * * Userspace can perform a GETPLANE ioctl to retrieve information about a * plane. * * To retrieve the number of formats supported, set @count_format_types to zero * and call the ioctl. @count_format_types will be updated with the value. * * To retrieve these formats, allocate an array with the memory needed to store * @count_format_types formats. Point @format_type_ptr to this array and call * the ioctl again (with @count_format_types still set to the value returned in * the first ioctl call). */struct drm_mode_get_plane { /** * @plane_id: Object ID of the plane whose information should be * retrieved. Set by caller. */ __u32 plane_id;
/** @crtc_id: Object ID of the current CRTC. */ __u32 crtc_id; /** @fb_id: Object ID of the current fb. */ __u32 fb_id;
/** * @possible_crtcs: Bitmask of CRTC's compatible with the plane. CRTC's * are created and they receive an index, which corresponds to their * position in the bitmask. Bit N corresponds to * :ref:`CRTC index<crtc_index>` N. */ __u32 possible_crtcs; /** @gamma_size: Never used. */ __u32 gamma_size;
/** @count_format_types: Number of formats. */ __u32 count_format_types; /** * @format_type_ptr: Pointer to ``__u32`` array of formats that are * supported by the plane. These formats do not require modifiers. */ __u64 format_type_ptr;};
struct drm_mode_get_plane_res { __u64 plane_id_ptr; __u32 count_planes;};
#define DRM_MODE_ENCODER_NONE 0#define DRM_MODE_ENCODER_DAC 1#define DRM_MODE_ENCODER_TMDS 2#define DRM_MODE_ENCODER_LVDS 3#define DRM_MODE_ENCODER_TVDAC 4#define DRM_MODE_ENCODER_VIRTUAL 5#define DRM_MODE_ENCODER_DSI 6#define DRM_MODE_ENCODER_DPMST 7#define DRM_MODE_ENCODER_DPI 8
struct drm_mode_get_encoder { __u32 encoder_id; __u32 encoder_type;
__u32 crtc_id; /**< Id of crtc */
__u32 possible_crtcs; __u32 possible_clones;};
/* This is for connectors with multiple signal types. *//* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */enum drm_mode_subconnector { DRM_MODE_SUBCONNECTOR_Automatic = 0, /* DVI-I, TV */ DRM_MODE_SUBCONNECTOR_Unknown = 0, /* DVI-I, TV, DP */ DRM_MODE_SUBCONNECTOR_VGA = 1, /* DP */ DRM_MODE_SUBCONNECTOR_DVID = 3, /* DVI-I DP */ DRM_MODE_SUBCONNECTOR_DVIA = 4, /* DVI-I */ DRM_MODE_SUBCONNECTOR_Composite = 5, /* TV */ DRM_MODE_SUBCONNECTOR_SVIDEO = 6, /* TV */ DRM_MODE_SUBCONNECTOR_Component = 8, /* TV */ DRM_MODE_SUBCONNECTOR_SCART = 9, /* TV */ DRM_MODE_SUBCONNECTOR_DisplayPort = 10, /* DP */ DRM_MODE_SUBCONNECTOR_HDMIA = 11, /* DP */ DRM_MODE_SUBCONNECTOR_Native = 15, /* DP */ DRM_MODE_SUBCONNECTOR_Wireless = 18, /* DP */};
#define DRM_MODE_CONNECTOR_Unknown 0#define DRM_MODE_CONNECTOR_VGA 1#define DRM_MODE_CONNECTOR_DVII 2#define DRM_MODE_CONNECTOR_DVID 3#define DRM_MODE_CONNECTOR_DVIA 4#define DRM_MODE_CONNECTOR_Composite 5#define DRM_MODE_CONNECTOR_SVIDEO 6#define DRM_MODE_CONNECTOR_LVDS 7#define DRM_MODE_CONNECTOR_Component 8#define DRM_MODE_CONNECTOR_9PinDIN 9#define DRM_MODE_CONNECTOR_DisplayPort 10#define DRM_MODE_CONNECTOR_HDMIA 11#define DRM_MODE_CONNECTOR_HDMIB 12#define DRM_MODE_CONNECTOR_TV 13#define DRM_MODE_CONNECTOR_eDP 14#define DRM_MODE_CONNECTOR_VIRTUAL 15#define DRM_MODE_CONNECTOR_DSI 16#define DRM_MODE_CONNECTOR_DPI 17#define DRM_MODE_CONNECTOR_WRITEBACK 18#define DRM_MODE_CONNECTOR_SPI 19#define DRM_MODE_CONNECTOR_USB 20
/** * struct drm_mode_get_connector - Get connector metadata. * * User-space can perform a GETCONNECTOR ioctl to retrieve information about a * connector. User-space is expected to retrieve encoders, modes and properties * by performing this ioctl at least twice: the first time to retrieve the * number of elements, the second time to retrieve the elements themselves. * * To retrieve the number of elements, set @count_props and @count_encoders to * zero, set @count_modes to 1, and set @modes_ptr to a temporary struct * drm_mode_modeinfo element. * * To retrieve the elements, allocate arrays for @encoders_ptr, @modes_ptr, * @props_ptr and @prop_values_ptr, then set @count_modes, @count_props and * @count_encoders to their capacity. * * Performing the ioctl only twice may be racy: the number of elements may have * changed with a hotplug event in-between the two ioctls. User-space is * expected to retry the last ioctl until the number of elements stabilizes. * The kernel won't fill any array which doesn't have the expected length. * * **Force-probing a connector** * * If the @count_modes field is set to zero and the DRM client is the current * DRM master, the kernel will perform a forced probe on the connector to * refresh the connector status, modes and EDID. A forced-probe can be slow, * might cause flickering and the ioctl will block. * * User-space needs to force-probe connectors to ensure their metadata is * up-to-date at startup and after receiving a hot-plug event. User-space * may perform a forced-probe when the user explicitly requests it. User-space * shouldn't perform a forced-probe in other situations. */struct drm_mode_get_connector { /** @encoders_ptr: Pointer to ``__u32`` array of object IDs. */ __u64 encoders_ptr; /** @modes_ptr: Pointer to struct drm_mode_modeinfo array. */ __u64 modes_ptr; /** @props_ptr: Pointer to ``__u32`` array of property IDs. */ __u64 props_ptr; /** @prop_values_ptr: Pointer to ``__u64`` array of property values. */ __u64 prop_values_ptr;
/** @count_modes: Number of modes. */ __u32 count_modes; /** @count_props: Number of properties. */ __u32 count_props; /** @count_encoders: Number of encoders. */ __u32 count_encoders;
/** @encoder_id: Object ID of the current encoder. */ __u32 encoder_id; /** @connector_id: Object ID of the connector. */ __u32 connector_id; /** * @connector_type: Type of the connector. * * See DRM_MODE_CONNECTOR_* defines. */ __u32 connector_type; /** * @connector_type_id: Type-specific connector number. * * This is not an object ID. This is a per-type connector number. Each * (type, type_id) combination is unique across all connectors of a DRM * device. * * The (type, type_id) combination is not a stable identifier: the * type_id can change depending on the driver probe order. */ __u32 connector_type_id;
/** * @connection: Status of the connector. * * See enum drm_connector_status. */ __u32 connection; /** @mm_width: Width of the connected sink in millimeters. */ __u32 mm_width; /** @mm_height: Height of the connected sink in millimeters. */ __u32 mm_height; /** * @subpixel: Subpixel order of the connected sink. * * See enum subpixel_order. */ __u32 subpixel;
/** @pad: Padding, must be zero. */ __u32 pad;};
#define DRM_MODE_PROP_PENDING (1<<0) /* deprecated, do not use */#define DRM_MODE_PROP_RANGE (1<<1)#define DRM_MODE_PROP_IMMUTABLE (1<<2)#define DRM_MODE_PROP_ENUM (1<<3) /* enumerated type with text strings */#define DRM_MODE_PROP_BLOB (1<<4)#define DRM_MODE_PROP_BITMASK (1<<5) /* bitmask of enumerated types */
/* non-extended types: legacy bitmask, one bit per type: */#define DRM_MODE_PROP_LEGACY_TYPE ( \ DRM_MODE_PROP_RANGE | \ DRM_MODE_PROP_ENUM | \ DRM_MODE_PROP_BLOB | \ DRM_MODE_PROP_BITMASK)
/* extended-types: rather than continue to consume a bit per type, * grab a chunk of the bits to use as integer type id. */#define DRM_MODE_PROP_EXTENDED_TYPE 0x0000ffc0#define DRM_MODE_PROP_TYPE(n) ((n) << 6)#define DRM_MODE_PROP_OBJECT DRM_MODE_PROP_TYPE(1)#define DRM_MODE_PROP_SIGNED_RANGE DRM_MODE_PROP_TYPE(2)
/* the PROP_ATOMIC flag is used to hide properties from userspace that * is not aware of atomic properties. This is mostly to work around * older userspace (DDX drivers) that read/write each prop they find, * without being aware that this could be triggering a lengthy modeset. */#define DRM_MODE_PROP_ATOMIC 0x80000000
/** * struct drm_mode_property_enum - Description for an enum/bitfield entry. * @value: numeric value for this enum entry. * @name: symbolic name for this enum entry. * * See struct drm_property_enum for details. */struct drm_mode_property_enum { __u64 value; char name[DRM_PROP_NAME_LEN];};
/** * struct drm_mode_get_property - Get property metadata. * * User-space can perform a GETPROPERTY ioctl to retrieve information about a * property. The same property may be attached to multiple objects, see * "Modeset Base Object Abstraction". * * The meaning of the @values_ptr field changes depending on the property type. * See &drm_property.flags for more details. * * The @enum_blob_ptr and @count_enum_blobs fields are only meaningful when the * property has the type &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK. For * backwards compatibility, the kernel will always set @count_enum_blobs to * zero when the property has the type &DRM_MODE_PROP_BLOB. User-space must * ignore these two fields if the property has a different type. * * User-space is expected to retrieve values and enums by performing this ioctl * at least twice: the first time to retrieve the number of elements, the * second time to retrieve the elements themselves. * * To retrieve the number of elements, set @count_values and @count_enum_blobs * to zero, then call the ioctl. @count_values will be updated with the number * of elements. If the property has the type &DRM_MODE_PROP_ENUM or * &DRM_MODE_PROP_BITMASK, @count_enum_blobs will be updated as well. * * To retrieve the elements themselves, allocate an array for @values_ptr and * set @count_values to its capacity. If the property has the type * &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK, allocate an array for * @enum_blob_ptr and set @count_enum_blobs to its capacity. Calling the ioctl * again will fill the arrays. */struct drm_mode_get_property { /** @values_ptr: Pointer to a ``__u64`` array. */ __u64 values_ptr; /** @enum_blob_ptr: Pointer to a struct drm_mode_property_enum array. */ __u64 enum_blob_ptr;
/** * @prop_id: Object ID of the property which should be retrieved. Set * by the caller. */ __u32 prop_id; /** * @flags: ``DRM_MODE_PROP_*`` bitfield. See &drm_property.flags for * a definition of the flags. */ __u32 flags; /** * @name: Symbolic property name. User-space should use this field to * recognize properties. */ char name[DRM_PROP_NAME_LEN];
/** @count_values: Number of elements in @values_ptr. */ __u32 count_values; /** @count_enum_blobs: Number of elements in @enum_blob_ptr. */ __u32 count_enum_blobs;};
struct drm_mode_connector_set_property { __u64 value; __u32 prop_id; __u32 connector_id;};
#define DRM_MODE_OBJECT_CRTC 0xcccccccc#define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0#define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0#define DRM_MODE_OBJECT_MODE 0xdededede#define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0#define DRM_MODE_OBJECT_FB 0xfbfbfbfb#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb#define DRM_MODE_OBJECT_PLANE 0xeeeeeeee#define DRM_MODE_OBJECT_COLOROP 0xfafafafa#define DRM_MODE_OBJECT_ANY 0
struct drm_mode_obj_get_properties { __u64 props_ptr; __u64 prop_values_ptr; __u32 count_props; __u32 obj_id; __u32 obj_type;};
struct drm_mode_obj_set_property { __u64 value; __u32 prop_id; __u32 obj_id; __u32 obj_type;};
struct drm_mode_get_blob { __u32 blob_id; __u32 length; __u64 data;};
struct drm_mode_fb_cmd { __u32 fb_id; __u32 width; __u32 height; __u32 pitch; __u32 bpp; __u32 depth; /* driver specific handle */ __u32 handle;};
#define DRM_MODE_FB_INTERLACED (1<<0) /* for interlaced framebuffers */#define DRM_MODE_FB_MODIFIERS (1<<1) /* enables ->modifier[] */
/** * struct drm_mode_fb_cmd2 - Frame-buffer metadata. * * This struct holds frame-buffer metadata. There are two ways to use it: * * - User-space can fill this struct and perform a &DRM_IOCTL_MODE_ADDFB2 * ioctl to register a new frame-buffer. The new frame-buffer object ID will * be set by the kernel in @fb_id. * - User-space can set @fb_id and perform a &DRM_IOCTL_MODE_GETFB2 ioctl to * fetch metadata about an existing frame-buffer. * * In case of planar formats, this struct allows up to 4 buffer objects with * offsets and pitches per plane. The pitch and offset order are dictated by * the format FourCC as defined by ``drm_fourcc.h``, e.g. NV12 is described as: * * YUV 4:2:0 image with a plane of 8-bit Y samples followed by an * interleaved U/V plane containing 8-bit 2x2 subsampled colour difference * samples. * * So it would consist of a Y plane at ``offsets[0]`` and a UV plane at * ``offsets[1]``. * * To accommodate tiled, compressed, etc formats, a modifier can be specified. * For more information see the "Format Modifiers" section. Note that even * though it looks like we have a modifier per-plane, we in fact do not. The * modifier for each plane must be identical. Thus all combinations of * different data layouts for multi-plane formats must be enumerated as * separate modifiers. * * All of the entries in @handles, @pitches, @offsets and @modifier must be * zero when unused. Warning, for @offsets and @modifier zero can't be used to * figure out whether the entry is used or not since it's a valid value (a zero * offset is common, and a zero modifier is &DRM_FORMAT_MOD_LINEAR). */struct drm_mode_fb_cmd2 { /** @fb_id: Object ID of the frame-buffer. */ __u32 fb_id; /** @width: Width of the frame-buffer. */ __u32 width; /** @height: Height of the frame-buffer. */ __u32 height; /** * @pixel_format: FourCC format code, see ``DRM_FORMAT_*`` constants in * ``drm_fourcc.h``. */ __u32 pixel_format; /** * @flags: Frame-buffer flags (see &DRM_MODE_FB_INTERLACED and * &DRM_MODE_FB_MODIFIERS). */ __u32 flags;
/** * @handles: GEM buffer handle, one per plane. Set to 0 if the plane is * unused. The same handle can be used for multiple planes. */ __u32 handles[4]; /** @pitches: Pitch (aka. stride) in bytes, one per plane. */ __u32 pitches[4]; /** @offsets: Offset into the buffer in bytes, one per plane. */ __u32 offsets[4]; /** * @modifier: Format modifier, one per plane. See ``DRM_FORMAT_MOD_*`` * constants in ``drm_fourcc.h``. All planes must use the same * modifier. Ignored unless &DRM_MODE_FB_MODIFIERS is set in @flags. */ __u64 modifier[4];};
#define DRM_MODE_FB_DIRTY_ANNOTATE_COPY 0x01#define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02#define DRM_MODE_FB_DIRTY_FLAGS 0x03
#define DRM_MODE_FB_DIRTY_MAX_CLIPS 256
/* * Mark a region of a framebuffer as dirty. * * Some hardware does not automatically update display contents * as a hardware or software draw to a framebuffer. This ioctl * allows userspace to tell the kernel and the hardware what * regions of the framebuffer have changed. * * The kernel or hardware is free to update more then just the * region specified by the clip rects. The kernel or hardware * may also delay and/or coalesce several calls to dirty into a * single update. * * Userspace may annotate the updates, the annotates are a * promise made by the caller that the change is either a copy * of pixels or a fill of a single color in the region specified. * * If the DRM_MODE_FB_DIRTY_ANNOTATE_COPY flag is given then * the number of updated regions are half of num_clips given, * where the clip rects are paired in src and dst. The width and * height of each one of the pairs must match. * * If the DRM_MODE_FB_DIRTY_ANNOTATE_FILL flag is given the caller * promises that the region specified of the clip rects is filled * completely with a single color as given in the color argument. */
struct drm_mode_fb_dirty_cmd { __u32 fb_id; __u32 flags; __u32 color; __u32 num_clips; __u64 clips_ptr;};
struct drm_mode_mode_cmd { __u32 connector_id; struct drm_mode_modeinfo mode;};
#define DRM_MODE_CURSOR_BO 0x01#define DRM_MODE_CURSOR_MOVE 0x02#define DRM_MODE_CURSOR_FLAGS 0x03
/* * depending on the value in flags different members are used. * * CURSOR_BO uses * crtc_id * width * height * handle - if 0 turns the cursor off * * CURSOR_MOVE uses * crtc_id * x * y */struct drm_mode_cursor { __u32 flags; __u32 crtc_id; __s32 x; __s32 y; __u32 width; __u32 height; /* driver specific handle */ __u32 handle;};
struct drm_mode_cursor2 { __u32 flags; __u32 crtc_id; __s32 x; __s32 y; __u32 width; __u32 height; /* driver specific handle */ __u32 handle; __s32 hot_x; __s32 hot_y;};
struct drm_mode_crtc_lut { __u32 crtc_id; __u32 gamma_size;
/* pointers to arrays */ __u64 red; __u64 green; __u64 blue;};
struct drm_color_ctm { /* * Conversion matrix in S31.32 sign-magnitude * (not two's complement!) format. * * out matrix in * |R| |0 1 2| |R| * |G| = |3 4 5| x |G| * |B| |6 7 8| |B| */ __u64 matrix[9];};
struct drm_color_ctm_3x4 { /* * Conversion matrix with 3x4 dimensions in S31.32 sign-magnitude * (not two's complement!) format. * * out matrix in * |R| |0 1 2 3 | | R | * |G| = |4 5 6 7 | x | G | * |B| |8 9 10 11| | B | * |1.0| */ __u64 matrix[12];};
struct drm_color_lut { /* * Values are mapped linearly to 0.0 - 1.0 range, with 0x0 == 0.0 and * 0xffff == 1.0. */ __u16 red; __u16 green; __u16 blue; __u16 reserved;};
/* * struct drm_color_lut32 * * 32-bit per channel color LUT entry, similar to drm_color_lut. */struct drm_color_lut32 { __u32 red; __u32 green; __u32 blue; __u32 reserved;};
/** * enum drm_colorop_type - Type of color operation * * drm_colorops can be of many different types. Each type behaves differently * and defines a different set of properties. This enum defines all types and * gives a high-level description. */enum drm_colorop_type { /** * @DRM_COLOROP_1D_CURVE: * * enum string "1D Curve" * * A 1D curve that is being applied to all color channels. The * curve is specified via the CURVE_1D_TYPE colorop property. */ DRM_COLOROP_1D_CURVE,
/** * @DRM_COLOROP_1D_LUT: * * enum string "1D LUT" * * A simple 1D LUT of uniformly spaced &drm_color_lut32 entries, * packed into a blob via the DATA property. The driver's * expected LUT size is advertised via the SIZE property. * * The DATA blob is an array of struct drm_color_lut32 with size * of "size". */ DRM_COLOROP_1D_LUT,
/** * @DRM_COLOROP_CTM_3X4: * * enum string "3x4 Matrix" * * A 3x4 matrix. Its values are specified via the * &drm_color_ctm_3x4 struct provided via the DATA property. * * The DATA blob is a float[12]: * out matrix in * | R | | 0 1 2 3 | | R | * | G | = | 4 5 6 7 | x | G | * | B | | 8 9 10 12 | | B | */ DRM_COLOROP_CTM_3X4,
/** * @DRM_COLOROP_MULTIPLIER: * * enum string "Multiplier" * * A simple multiplier, applied to all color values. The * multiplier is specified as a S31.32 via the MULTIPLIER * property. */ DRM_COLOROP_MULTIPLIER,
/** * @DRM_COLOROP_3D_LUT: * * enum string "3D LUT" * * A 3D LUT of &drm_color_lut32 entries, * packed into a blob via the DATA property. The driver's expected * LUT size is advertised via the SIZE property, i.e., a 3D LUT with * 17x17x17 entries will have SIZE set to 17. * * The DATA blob is a 3D array of struct drm_color_lut32 with dimension * length of "size". * The LUT elements are traversed like so: * * for B in range 0..n * for G in range 0..n * for R in range 0..n * index = R + n * (G + n * B) * color = lut3d[index] */ DRM_COLOROP_3D_LUT,};
/** * enum drm_colorop_lut3d_interpolation_type - type of 3DLUT interpolation */enum drm_colorop_lut3d_interpolation_type { /** * @DRM_COLOROP_LUT3D_INTERPOLATION_TETRAHEDRAL: * * Tetrahedral 3DLUT interpolation */ DRM_COLOROP_LUT3D_INTERPOLATION_TETRAHEDRAL,};
/** * enum drm_colorop_lut1d_interpolation_type - type of interpolation for 1D LUTs */enum drm_colorop_lut1d_interpolation_type { /** * @DRM_COLOROP_LUT1D_INTERPOLATION_LINEAR: * * Linear interpolation. Values between points of the LUT will be * linearly interpolated. */ DRM_COLOROP_LUT1D_INTERPOLATION_LINEAR,};
/** * struct drm_plane_size_hint - Plane size hints * @width: The width of the plane in pixel * @height: The height of the plane in pixel * * The plane SIZE_HINTS property blob contains an * array of struct drm_plane_size_hint. */struct drm_plane_size_hint { __u16 width; __u16 height;};
/** * struct hdr_metadata_infoframe - HDR Metadata Infoframe Data. * * HDR Metadata Infoframe as per CTA 861.G spec. This is expected * to match exactly with the spec. * * Userspace is expected to pass the metadata information as per * the format described in this structure. */struct hdr_metadata_infoframe { /** * @eotf: Electro-Optical Transfer Function (EOTF) * used in the stream. */ __u8 eotf; /** * @metadata_type: Static_Metadata_Descriptor_ID. */ __u8 metadata_type; /** * @display_primaries: Color Primaries of the Data. * These are coded as unsigned 16-bit values in units of * 0.00002, where 0x0000 represents zero and 0xC350 * represents 1.0000. * @display_primaries.x: X coordinate of color primary. * @display_primaries.y: Y coordinate of color primary. */ struct { __u16 x, y; } display_primaries[3]; /** * @white_point: White Point of Colorspace Data. * These are coded as unsigned 16-bit values in units of * 0.00002, where 0x0000 represents zero and 0xC350 * represents 1.0000. * @white_point.x: X coordinate of whitepoint of color primary. * @white_point.y: Y coordinate of whitepoint of color primary. */ struct { __u16 x, y; } white_point; /** * @max_display_mastering_luminance: Max Mastering Display Luminance. * This value is coded as an unsigned 16-bit value in units of 1 cd/m2, * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2. */ __u16 max_display_mastering_luminance; /** * @min_display_mastering_luminance: Min Mastering Display Luminance. * This value is coded as an unsigned 16-bit value in units of * 0.0001 cd/m2, where 0x0001 represents 0.0001 cd/m2 and 0xFFFF * represents 6.5535 cd/m2. */ __u16 min_display_mastering_luminance; /** * @max_cll: Max Content Light Level. * This value is coded as an unsigned 16-bit value in units of 1 cd/m2, * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2. */ __u16 max_cll; /** * @max_fall: Max Frame Average Light Level. * This value is coded as an unsigned 16-bit value in units of 1 cd/m2, * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2. */ __u16 max_fall;};
/** * struct hdr_output_metadata - HDR output metadata * * Metadata Information to be passed from userspace */struct hdr_output_metadata { /** * @metadata_type: Static_Metadata_Descriptor_ID. */ __u32 metadata_type; /** * @hdmi_metadata_type1: HDR Metadata Infoframe. */ union { struct hdr_metadata_infoframe hdmi_metadata_type1; };};
/** * DRM_MODE_PAGE_FLIP_EVENT * * Request that the kernel sends back a vblank event (see * struct drm_event_vblank) with the &DRM_EVENT_FLIP_COMPLETE type when the * page-flip is done. * * When used with atomic uAPI, one event will be delivered per CRTC included in * the atomic commit. A CRTC is included in an atomic commit if one of its * properties is set, or if a property is set on a connector or plane linked * via the CRTC_ID property to the CRTC. At least one CRTC must be included, * and all pulled in CRTCs must be either previously or newly powered on (in * other words, a powered off CRTC which stays off cannot be included in the * atomic commit). */#define DRM_MODE_PAGE_FLIP_EVENT 0x01/** * DRM_MODE_PAGE_FLIP_ASYNC * * Request that the page-flip is performed as soon as possible, ie. with no * delay due to waiting for vblank. This may cause tearing to be visible on * the screen. * * When used with atomic uAPI, the driver will return an error if the hardware * doesn't support performing an asynchronous page-flip for this update. * User-space should handle this, e.g. by falling back to a regular page-flip. * * Note, some hardware might need to perform one last synchronous page-flip * before being able to switch to asynchronous page-flips. As an exception, * the driver will return success even though that first page-flip is not * asynchronous. */#define DRM_MODE_PAGE_FLIP_ASYNC 0x02#define DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE 0x4#define DRM_MODE_PAGE_FLIP_TARGET_RELATIVE 0x8#define DRM_MODE_PAGE_FLIP_TARGET (DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE | \ DRM_MODE_PAGE_FLIP_TARGET_RELATIVE)/** * DRM_MODE_PAGE_FLIP_FLAGS * * Bitmask of flags suitable for &drm_mode_crtc_page_flip_target.flags. */#define DRM_MODE_PAGE_FLIP_FLAGS (DRM_MODE_PAGE_FLIP_EVENT | \ DRM_MODE_PAGE_FLIP_ASYNC | \ DRM_MODE_PAGE_FLIP_TARGET)
/* * Request a page flip on the specified crtc. * * This ioctl will ask KMS to schedule a page flip for the specified * crtc. Once any pending rendering targeting the specified fb (as of * ioctl time) has completed, the crtc will be reprogrammed to display * that fb after the next vertical refresh. The ioctl returns * immediately, but subsequent rendering to the current fb will block * in the execbuffer ioctl until the page flip happens. If a page * flip is already pending as the ioctl is called, EBUSY will be * returned. * * Flag DRM_MODE_PAGE_FLIP_EVENT requests that drm sends back a vblank * event (see drm.h: struct drm_event_vblank) when the page flip is * done. The user_data field passed in with this ioctl will be * returned as the user_data field in the vblank event struct. * * Flag DRM_MODE_PAGE_FLIP_ASYNC requests that the flip happen * 'as soon as possible', meaning that it not delay waiting for vblank. * This may cause tearing on the screen. * * The reserved field must be zero. */
struct drm_mode_crtc_page_flip { __u32 crtc_id; __u32 fb_id; __u32 flags; __u32 reserved; __u64 user_data;};
/* * Request a page flip on the specified crtc. * * Same as struct drm_mode_crtc_page_flip, but supports new flags and * re-purposes the reserved field: * * The sequence field must be zero unless either of the * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is specified. When * the ABSOLUTE flag is specified, the sequence field denotes the absolute * vblank sequence when the flip should take effect. When the RELATIVE * flag is specified, the sequence field denotes the relative (to the * current one when the ioctl is called) vblank sequence when the flip * should take effect. NOTE: DRM_IOCTL_WAIT_VBLANK must still be used to * make sure the vblank sequence before the target one has passed before * calling this ioctl. The purpose of the * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is merely to clarify * the target for when code dealing with a page flip runs during a * vertical blank period. */
struct drm_mode_crtc_page_flip_target { __u32 crtc_id; __u32 fb_id; __u32 flags; __u32 sequence; __u64 user_data;};
/** * struct drm_mode_create_dumb - Create a KMS dumb buffer for scanout. * @height: buffer height in pixels * @width: buffer width in pixels * @bpp: color mode * @flags: must be zero * @handle: buffer object handle * @pitch: number of bytes between two consecutive lines * @size: size of the whole buffer in bytes * * User-space fills @height, @width, @bpp and @flags. If the IOCTL succeeds, * the kernel fills @handle, @pitch and @size. * * The value of @bpp is a color-mode number describing a specific format * or a variant thereof. The value often corresponds to the number of bits * per pixel for most modes, although there are exceptions. Each color mode * maps to a DRM format plus a number of modes with similar pixel layout. * Framebuffer layout is always linear. * * Support for all modes and formats is optional. Even if dumb-buffer * creation with a certain color mode succeeds, it is not guaranteed that * the DRM driver supports any of the related formats. Most drivers support * a color mode of 32 with a format of DRM_FORMAT_XRGB8888 on their primary * plane. * * +------------+------------------------+------------------------+ * | Color mode | Framebuffer format | Compatible formats | * +============+========================+========================+ * | 32 | * DRM_FORMAT_XRGB8888 | * DRM_FORMAT_BGRX8888 | * | | | * DRM_FORMAT_RGBX8888 | * | | | * DRM_FORMAT_XBGR8888 | * +------------+------------------------+------------------------+ * | 24 | * DRM_FORMAT_RGB888 | * DRM_FORMAT_BGR888 | * +------------+------------------------+------------------------+ * | 16 | * DRM_FORMAT_RGB565 | * DRM_FORMAT_BGR565 | * +------------+------------------------+------------------------+ * | 15 | * DRM_FORMAT_XRGB1555 | * DRM_FORMAT_BGRX1555 | * | | | * DRM_FORMAT_RGBX1555 | * | | | * DRM_FORMAT_XBGR1555 | * +------------+------------------------+------------------------+ * | 8 | * DRM_FORMAT_C8 | * DRM_FORMAT_D8 | * | | | * DRM_FORMAT_R8 | * +------------+------------------------+------------------------+ * | 4 | * DRM_FORMAT_C4 | * DRM_FORMAT_D4 | * | | | * DRM_FORMAT_R4 | * +------------+------------------------+------------------------+ * | 2 | * DRM_FORMAT_C2 | * DRM_FORMAT_D2 | * | | | * DRM_FORMAT_R2 | * +------------+------------------------+------------------------+ * | 1 | * DRM_FORMAT_C1 | * DRM_FORMAT_D1 | * | | | * DRM_FORMAT_R1 | * +------------+------------------------+------------------------+ * * Color modes of 10, 12, 15, 30 and 64 are only supported for use by * legacy user space. Please don't use them in new code. Other modes * are not support. * * Do not attempt to allocate anything but linear framebuffer memory * with single-plane RGB data. Allocation of other framebuffer * layouts requires dedicated ioctls in the respective DRM driver. */struct drm_mode_create_dumb { __u32 height; __u32 width; __u32 bpp; __u32 flags;
__u32 handle; __u32 pitch; __u64 size;};
/* set up for mmap of a dumb scanout buffer */struct drm_mode_map_dumb { /** Handle for the object being mapped. */ __u32 handle; __u32 pad; /** * Fake offset to use for subsequent mmap call * * This is a fixed-size type for 32/64 compatibility. */ __u64 offset;};
struct drm_mode_destroy_dumb { __u32 handle;};
/** * DRM_MODE_ATOMIC_TEST_ONLY * * Do not apply the atomic commit, instead check whether the hardware supports * this configuration. * * See &drm_mode_config_funcs.atomic_check for more details on test-only * commits. */#define DRM_MODE_ATOMIC_TEST_ONLY 0x0100/** * DRM_MODE_ATOMIC_NONBLOCK * * Do not block while applying the atomic commit. The &DRM_IOCTL_MODE_ATOMIC * IOCTL returns immediately instead of waiting for the changes to be applied * in hardware. Note, the driver will still check that the update can be * applied before retuning. */#define DRM_MODE_ATOMIC_NONBLOCK 0x0200/** * DRM_MODE_ATOMIC_ALLOW_MODESET * * Allow the update to result in temporary or transient visible artifacts while * the update is being applied. Applying the update may also take significantly * more time than a page flip. All visual artifacts will disappear by the time * the update is completed, as signalled through the vblank event's timestamp * (see struct drm_event_vblank). * * This flag must be set when the KMS update might cause visible artifacts. * Without this flag such KMS update will return a EINVAL error. What kind of * update may cause visible artifacts depends on the driver and the hardware. * User-space that needs to know beforehand if an update might cause visible * artifacts can use &DRM_MODE_ATOMIC_TEST_ONLY without * &DRM_MODE_ATOMIC_ALLOW_MODESET to see if it fails. * * To the best of the driver's knowledge, visual artifacts are guaranteed to * not appear when this flag is not set. Some sinks might display visual * artifacts outside of the driver's control. */#define DRM_MODE_ATOMIC_ALLOW_MODESET 0x0400
/** * DRM_MODE_ATOMIC_FLAGS * * Bitfield of flags accepted by the &DRM_IOCTL_MODE_ATOMIC IOCTL in * &drm_mode_atomic.flags. */#define DRM_MODE_ATOMIC_FLAGS (\ DRM_MODE_PAGE_FLIP_EVENT |\ DRM_MODE_PAGE_FLIP_ASYNC |\ DRM_MODE_ATOMIC_TEST_ONLY |\ DRM_MODE_ATOMIC_NONBLOCK |\ DRM_MODE_ATOMIC_ALLOW_MODESET)
struct drm_mode_atomic { __u32 flags; __u32 count_objs; __u64 objs_ptr; __u64 count_props_ptr; __u64 props_ptr; __u64 prop_values_ptr; __u64 reserved; __u64 user_data;};
struct drm_format_modifier_blob {#define FORMAT_BLOB_CURRENT 1 /* Version of this blob format */ __u32 version;
/* Flags */ __u32 flags;
/* Number of fourcc formats supported */ __u32 count_formats;
/* Where in this blob the formats exist (in bytes) */ __u32 formats_offset;
/* Number of drm_format_modifiers */ __u32 count_modifiers;
/* Where in this blob the modifiers exist (in bytes) */ __u32 modifiers_offset;
/* __u32 formats[] */ /* struct drm_format_modifier modifiers[] */};
struct drm_format_modifier { /* Bitmask of formats in get_plane format list this info applies to. The * offset allows a sliding window of which 64 formats (bits). * * Some examples: * In today's world with < 65 formats, and formats 0, and 2 are * supported * 0x0000000000000005 * ^-offset = 0, formats = 5 * * If the number formats grew to 128, and formats 98-102 are * supported with the modifier: * * 0x0000007c00000000 0000000000000000 * ^ * |__offset = 64, formats = 0x7c00000000 * */ __u64 formats; __u32 offset; __u32 pad;
/* The modifier that applies to the >get_plane format list bitmask. */ __u64 modifier;};
/** * struct drm_mode_create_blob - Create New blob property * * Create a new 'blob' data property, copying length bytes from data pointer, * and returning new blob ID. */struct drm_mode_create_blob { /** @data: Pointer to data to copy. */ __u64 data; /** @length: Length of data to copy. */ __u32 length; /** @blob_id: Return: new property ID. */ __u32 blob_id;};
/** * struct drm_mode_destroy_blob - Destroy user blob * @blob_id: blob_id to destroy * * Destroy a user-created blob property. * * User-space can release blobs as soon as they do not need to refer to them by * their blob object ID. For instance, if you are using a MODE_ID blob in an * atomic commit and you will not make another commit re-using the same ID, you * can destroy the blob as soon as the commit has been issued, without waiting * for it to complete. */struct drm_mode_destroy_blob { __u32 blob_id;};
/** * struct drm_mode_create_lease - Create lease * * Lease mode resources, creating another drm_master. * * The @object_ids array must reference at least one CRTC, one connector and * one plane if &DRM_CLIENT_CAP_UNIVERSAL_PLANES is enabled. Alternatively, * the lease can be completely empty. */struct drm_mode_create_lease { /** @object_ids: Pointer to array of object ids (__u32) */ __u64 object_ids; /** @object_count: Number of object ids */ __u32 object_count; /** @flags: flags for new FD (O_CLOEXEC, etc) */ __u32 flags;
/** @lessee_id: Return: unique identifier for lessee. */ __u32 lessee_id; /** @fd: Return: file descriptor to new drm_master file */ __u32 fd;};
/** * struct drm_mode_list_lessees - List lessees * * List lesses from a drm_master. */struct drm_mode_list_lessees { /** * @count_lessees: Number of lessees. * * On input, provides length of the array. * On output, provides total number. No * more than the input number will be written * back, so two calls can be used to get * the size and then the data. */ __u32 count_lessees; /** @pad: Padding. */ __u32 pad;
/** * @lessees_ptr: Pointer to lessees. * * Pointer to __u64 array of lessee ids */ __u64 lessees_ptr;};
/** * struct drm_mode_get_lease - Get Lease * * Get leased objects. */struct drm_mode_get_lease { /** * @count_objects: Number of leased objects. * * On input, provides length of the array. * On output, provides total number. No * more than the input number will be written * back, so two calls can be used to get * the size and then the data. */ __u32 count_objects; /** @pad: Padding. */ __u32 pad;
/** * @objects_ptr: Pointer to objects. * * Pointer to __u32 array of object ids. */ __u64 objects_ptr;};
/** * struct drm_mode_revoke_lease - Revoke lease */struct drm_mode_revoke_lease { /** @lessee_id: Unique ID of lessee */ __u32 lessee_id;};
/** * struct drm_mode_rect - Two dimensional rectangle. * @x1: Horizontal starting coordinate (inclusive). * @y1: Vertical starting coordinate (inclusive). * @x2: Horizontal ending coordinate (exclusive). * @y2: Vertical ending coordinate (exclusive). * * With drm subsystem using struct drm_rect to manage rectangular area this * export it to user-space. * * Currently used by drm_mode_atomic blob property FB_DAMAGE_CLIPS. */struct drm_mode_rect { __s32 x1; __s32 y1; __s32 x2; __s32 y2;};
/** * struct drm_mode_closefb * @fb_id: Framebuffer ID. * @pad: Must be zero. */struct drm_mode_closefb { __u32 fb_id; __u32 pad;};
/* * Put 16-bit ARGB values into a standard 64-bit representation that can be * used for ioctl parameters, inter-driver communication, etc. * * If the component values being provided contain less than 16 bits of * precision, use a conversion ratio to get a better color approximation. * The ratio is computed as (2^16 - 1) / (2^bpc - 1), where bpc and 16 are * the input and output precision, respectively. * Also note bpc must be greater than 0. */#define __DRM_ARGB64_PREP(c, shift) \ (((__u64)(c) & __GENMASK(15, 0)) << (shift))
#define __DRM_ARGB64_PREP_BPC(c, shift, bpc) \({ \ __u16 mask = __GENMASK((bpc) - 1, 0); \ __u16 conv = __KERNEL_DIV_ROUND_CLOSEST((mask & (c)) * \ __GENMASK(15, 0), mask);\ __DRM_ARGB64_PREP(conv, shift); \})
#define DRM_ARGB64_PREP(alpha, red, green, blue) \( \ __DRM_ARGB64_PREP(alpha, 48) | \ __DRM_ARGB64_PREP(red, 32) | \ __DRM_ARGB64_PREP(green, 16) | \ __DRM_ARGB64_PREP(blue, 0) \)
#define DRM_ARGB64_PREP_BPC(alpha, red, green, blue, bpc) \({ \ __typeof__(bpc) __bpc = bpc; \ __DRM_ARGB64_PREP_BPC(alpha, 48, __bpc) | \ __DRM_ARGB64_PREP_BPC(red, 32, __bpc) | \ __DRM_ARGB64_PREP_BPC(green, 16, __bpc) | \ __DRM_ARGB64_PREP_BPC(blue, 0, __bpc); \})
/* * Extract the specified color component from a standard 64-bit ARGB value. * * If the requested precision is less than 16 bits, make use of a conversion * ratio calculated as (2^bpc - 1) / (2^16 - 1), where bpc and 16 are the * output and input precision, respectively. * * If speed is more important than accuracy, use DRM_ARGB64_GET*_BPCS() * instead of DRM_ARGB64_GET*_BPC() in order to replace the expensive * division with a simple bit right-shift operation. */#define __DRM_ARGB64_GET(c, shift) \ ((__u16)(((__u64)(c) >> (shift)) & __GENMASK(15, 0)))
#define __DRM_ARGB64_GET_BPC(c, shift, bpc) \({ \ __u16 comp = __DRM_ARGB64_GET(c, shift); \ __KERNEL_DIV_ROUND_CLOSEST(comp * __GENMASK((bpc) - 1, 0), \ __GENMASK(15, 0)); \})
#define __DRM_ARGB64_GET_BPCS(c, shift, bpc) \ (__DRM_ARGB64_GET(c, shift) >> (16 - (bpc)))
#define DRM_ARGB64_GETA(c) __DRM_ARGB64_GET(c, 48)#define DRM_ARGB64_GETR(c) __DRM_ARGB64_GET(c, 32)#define DRM_ARGB64_GETG(c) __DRM_ARGB64_GET(c, 16)#define DRM_ARGB64_GETB(c) __DRM_ARGB64_GET(c, 0)
#define DRM_ARGB64_GETA_BPC(c, bpc) __DRM_ARGB64_GET_BPC(c, 48, bpc)#define DRM_ARGB64_GETR_BPC(c, bpc) __DRM_ARGB64_GET_BPC(c, 32, bpc)#define DRM_ARGB64_GETG_BPC(c, bpc) __DRM_ARGB64_GET_BPC(c, 16, bpc)#define DRM_ARGB64_GETB_BPC(c, bpc) __DRM_ARGB64_GET_BPC(c, 0, bpc)
#define DRM_ARGB64_GETA_BPCS(c, bpc) __DRM_ARGB64_GET_BPCS(c, 48, bpc)#define DRM_ARGB64_GETR_BPCS(c, bpc) __DRM_ARGB64_GET_BPCS(c, 32, bpc)#define DRM_ARGB64_GETG_BPCS(c, bpc) __DRM_ARGB64_GET_BPCS(c, 16, bpc)#define DRM_ARGB64_GETB_BPCS(c, bpc) __DRM_ARGB64_GET_BPCS(c, 0, bpc)
#if defined(__cplusplus)}#endif
#endif