Something went wrong. Try again.
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
30 kB · 661 lines
at master
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662
.. _addsyscalls:
Adding a New System Call========================
This document describes what's involved in adding a new system call to theLinux kernel, over and above the normal submission advice in:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`.
System Call Alternatives------------------------
The first thing to consider when adding a new system call is whether one ofthe alternatives might be suitable instead. Although system calls are themost traditional and most obvious interaction points between userspace and thekernel, there are other possibilities -- choose what fits best for yourinterface.
- If the operations involved can be made to look like a filesystem-like object, it may make more sense to create a new filesystem or device. This also makes it easier to encapsulate the new functionality in a kernel module rather than requiring it to be built into the main kernel.
- If the new functionality involves operations where the kernel notifies userspace that something has happened, then returning a new file descriptor for the relevant object allows userspace to use ``poll``/``select``/``epoll`` to receive that notification. - However, operations that don't map to :manpage:`read(2)`/:manpage:`write(2)`-like operations have to be implemented as :manpage:`ioctl(2)` requests, which can lead to a somewhat opaque API.
- If you're just exposing runtime system information, a new node in sysfs (see ``Documentation/filesystems/sysfs.rst``) or the ``/proc`` filesystem may be more appropriate. However, access to these mechanisms requires that the relevant filesystem is mounted, which might not always be the case (e.g. in a namespaced/sandboxed/chrooted environment). Avoid adding any API to debugfs, as this is not considered a 'production' interface to userspace. - If the operation is specific to a particular file or file descriptor, then an additional :manpage:`fcntl(2)` command option may be more appropriate. However, :manpage:`fcntl(2)` is a multiplexing system call that hides a lot of complexity, so this option is best for when the new function is closely analogous to existing :manpage:`fcntl(2)` functionality, or the new functionality is very simple (for example, getting/setting a simple flag related to a file descriptor). - If the operation is specific to a particular task or process, then an additional :manpage:`prctl(2)` command option may be more appropriate. As with :manpage:`fcntl(2)`, this system call is a complicated multiplexor so is best reserved for near-analogs of existing ``prctl()`` commands or getting/setting a simple flag related to a process.
Designing the API: Planning for Extension-----------------------------------------
A new system call forms part of the API of the kernel, and has to be supportedindefinitely. As such, it's a very good idea to explicitly discuss theinterface on the kernel mailing list, and it's important to plan for futureextensions of the interface.
(The syscall table is littered with historical examples where this wasn't done,together with the corresponding follow-up system calls --``eventfd``/``eventfd2``, ``dup2``/``dup3``, ``inotify_init``/``inotify_init1``,``pipe``/``pipe2``, ``renameat``/``renameat2`` -- solearn from the history of the kernel and plan for extensions from the start.)
For simpler system calls that only take a couple of arguments, the preferredway to allow for future extensibility is to include a flags argument to thesystem call. To make sure that userspace programs can safely use flagsbetween kernel versions, check whether the flags value holds any unknownflags, and reject the system call (with ``EINVAL``) if it does::
if (flags & ~(THING_FLAG1 | THING_FLAG2 | THING_FLAG3)) return -EINVAL;
(If no flags values are used yet, check that the flags argument is zero.)
For more sophisticated system calls that involve a larger number of arguments,it's preferred to encapsulate the majority of the arguments into a structurethat is passed in by pointer. Such a structure can cope with future extensionby including a size argument in the structure::
struct xyzzy_params { u32 size; /* userspace sets p->size = sizeof(struct xyzzy_params) */ u32 param_1; u64 param_2; u64 param_3; };
As long as any subsequently added field, say ``param_4``, is designed so that azero value gives the previous behaviour, then this allows both directions ofversion mismatch:
- To cope with a later userspace program calling an older kernel, the kernel code should check that any memory beyond the size of the structure that it expects is zero (effectively checking that ``param_4 == 0``). - To cope with an older userspace program calling a newer kernel, the kernel code can zero-extend a smaller instance of the structure (effectively setting ``param_4 = 0``).
See :manpage:`perf_event_open(2)` and the ``perf_copy_attr()`` function (in``kernel/events/core.c``) for an example of this approach.
Designing the API: Other Considerations---------------------------------------
If your new system call allows userspace to refer to a kernel object, itshould use a file descriptor as the handle for that object -- don't invent anew type of userspace object handle when the kernel already has mechanisms andwell-defined semantics for using file descriptors.
If your new xyzzy(2) system call does return a new file descriptor,then the flags argument should include a value that is equivalent to setting``O_CLOEXEC`` on the new FD. This makes it possible for userspace to closethe timing window between ``xyzzy()`` and calling``fcntl(fd, F_SETFD, FD_CLOEXEC)``, where an unexpected ``fork()`` and``execve()`` in another thread could leak a descriptor tothe exec'ed program. (However, resist the temptation to reuse the actual valueof the ``O_CLOEXEC`` constant, as it is architecture-specific and is part of anumbering space of ``O_*`` flags that is fairly full.)
If your system call returns a new file descriptor, you should also considerwhat it means to use the :manpage:`poll(2)` family of system calls on that filedescriptor. Making a file descriptor ready for reading or writing is thenormal way for the kernel to indicate to userspace that an event hasoccurred on the corresponding kernel object.
If your new xyzzy(2) system call involves a filename argument::
int sys_xyzzy(const char __user *path, ..., unsigned int flags);
you should also consider whether an xyzzyat(2) version is more appropriate::
int sys_xyzzyat(int dfd, const char __user *path, ..., unsigned int flags);
This allows more flexibility for how userspace specifies the file in question;in particular it allows userspace to request the functionality for analready-opened file descriptor using the ``AT_EMPTY_PATH`` flag, effectivelygiving an fxyzzy(3) operation for free::
- xyzzyat(AT_FDCWD, path, ..., 0) is equivalent to xyzzy(path,...) - xyzzyat(fd, "", ..., AT_EMPTY_PATH) is equivalent to fxyzzy(fd, ...)
(For more details on the rationale of the \*at() calls, see the:manpage:`openat(2)` man page; for an example of AT_EMPTY_PATH, see the:manpage:`fstatat(2)` man page.)
If your new xyzzy(2) system call involves a parameter describing anoffset within a file, make its type ``loff_t`` so that 64-bit offsets can besupported even on 32-bit architectures.
If your new xyzzy(2) system call involves privileged functionality,it needs to be governed by the appropriate Linux capability bit (checked witha call to ``capable()``), as described in the :manpage:`capabilities(7)` manpage. Choose an existing capability bit that governs related functionality,but try to avoid combining lots of only vaguely related functions togetherunder the same bit, as this goes against capabilities' purpose of splittingthe power of root. In particular, avoid adding new uses of the alreadyoverly-general ``CAP_SYS_ADMIN`` capability.
If your new xyzzy(2) system call manipulates a process other thanthe calling process, it should be restricted (using a call to``ptrace_may_access()``) so that only a calling process with the samepermissions as the target process, or with the necessary capabilities, canmanipulate the target process.
Finally, be aware that some non-x86 architectures have an easier time ifsystem call parameters that are explicitly 64-bit fall on odd-numberedarguments (i.e. parameter 1, 3, 5), to allow use of contiguous pairs of 32-bitregisters. (This concern does not apply if the arguments are part of astructure that's passed in by pointer.)
Proposing the API-----------------
To make new system calls easy to review, it's best to divide up the patchsetinto separate chunks. These should include at least the following items asdistinct commits (each of which is described further below):
- The core implementation of the system call, together with prototypes, generic numbering, Kconfig changes and fallback stub implementation. - Wiring up of the new system call for one particular architecture, usually x86 (including all of x86_64, x86_32 and x32). - A demonstration of the use of the new system call in userspace via a selftest in ``tools/testing/selftests/``. - A draft man-page for the new system call, either as plain text in the cover letter, or as a patch to the (separate) man-pages repository.
New system call proposals, like any change to the kernel's API, should alwaysbe cc'ed to linux-api@vger.kernel.org.
Generic System Call Implementation----------------------------------
The main entry point for your new xyzzy(2) system call will be called``sys_xyzzy()``, but you add this entry point with the appropriate``SYSCALL_DEFINEn()`` macro rather than explicitly. The 'n' indicates thenumber of arguments to the system call, and the macro takes the system call namefollowed by the (type, name) pairs for the parameters as arguments. Usingthis macro allows metadata about the new system call to be made available forother tools.
The new entry point also needs a corresponding function prototype, in``include/linux/syscalls.h``, marked as asmlinkage to match the way that systemcalls are invoked::
asmlinkage long sys_xyzzy(...);
Some architectures (e.g. x86) have their own architecture-specific syscalltables, but several other architectures share a generic syscall table. Add yournew system call to the generic list by adding an entry to the list in``include/uapi/asm-generic/unistd.h``::
#define __NR_xyzzy 292 __SYSCALL(__NR_xyzzy, sys_xyzzy)
Also update the __NR_syscalls count to reflect the additional system call, andnote that if multiple new system calls are added in the same merge window,your new syscall number may get adjusted to resolve conflicts.
The file ``kernel/sys_ni.c`` provides a fallback stub implementation of eachsystem call, returning ``-ENOSYS``. Add your new system call here too::
COND_SYSCALL(xyzzy);
Your new kernel functionality, and the system call that controls it, shouldnormally be optional, so add a ``CONFIG`` option (typically to``init/Kconfig``) for it. As usual for new ``CONFIG`` options:
- Include a description of the new functionality and system call controlled by the option. - Make the option depend on EXPERT if it should be hidden from normal users. - Make any new source files implementing the function dependent on the CONFIG option in the Makefile (e.g. ``obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.o``). - Double check that the kernel still builds with the new CONFIG option turned off.
To summarize, you need a commit that includes:
- ``CONFIG`` option for the new function, normally in ``init/Kconfig`` - ``SYSCALL_DEFINEn(xyzzy, ...)`` for the entry point - corresponding prototype in ``include/linux/syscalls.h`` - generic table entry in ``include/uapi/asm-generic/unistd.h`` - fallback stub in ``kernel/sys_ni.c``
.. _syscall_generic_6_11:
Since 6.11~~~~~~~~~~
Starting with kernel version 6.11, general system call implementation for thefollowing architectures no longer requires modifications to``include/uapi/asm-generic/unistd.h``:
- arc - arm64 - csky - hexagon - loongarch - nios2 - openrisc - riscv
Instead, you need to update ``scripts/syscall.tbl`` and, if applicable, adjust``arch/*/kernel/Makefile.syscalls``.
As ``scripts/syscall.tbl`` serves as a common syscall table across multiplearchitectures, a new entry is required in this table::
468 common xyzzy sys_xyzzy
Note that adding an entry to ``scripts/syscall.tbl`` with the "common" ABIalso affects all architectures that share this table. For more limited orarchitecture-specific changes, consider using an architecture-specific ABI ordefining a new one.
If a new ABI, say ``xyz``, is introduced, the corresponding updates should bemade to ``arch/*/kernel/Makefile.syscalls`` as well::
syscall_abis_{32,64} += xyz (...)
To summarize, you need a commit that includes:
- ``CONFIG`` option for the new function, normally in ``init/Kconfig`` - ``SYSCALL_DEFINEn(xyzzy, ...)`` for the entry point - corresponding prototype in ``include/linux/syscalls.h`` - new entry in ``scripts/syscall.tbl`` - (if needed) Makefile updates in ``arch/*/kernel/Makefile.syscalls`` - fallback stub in ``kernel/sys_ni.c``
x86 System Call Implementation------------------------------
To wire up your new system call for x86 platforms, you need to update themaster syscall tables. Assuming your new system call isn't special in someway (see below), this involves a "common" entry (for x86_64 and x32) inarch/x86/entry/syscalls/syscall_64.tbl::
333 common xyzzy sys_xyzzy
and an "i386" entry in ``arch/x86/entry/syscalls/syscall_32.tbl``::
380 i386 xyzzy sys_xyzzy
Again, these numbers are liable to be changed if there are conflicts in therelevant merge window.
Compatibility System Calls (Generic)------------------------------------
For most system calls the same 64-bit implementation can be invoked even whenthe userspace program is itself 32-bit; even if the system call's parametersinclude an explicit pointer, this is handled transparently.
However, there are a couple of situations where a compatibility layer isneeded to cope with size differences between 32-bit and 64-bit.
The first is if the 64-bit kernel also supports 32-bit userspace programs, andso needs to parse areas of (``__user``) memory that could hold either 32-bit or64-bit values. In particular, this is needed whenever a system call argumentis:
- a pointer to a pointer - a pointer to a struct containing a pointer (e.g. ``struct iovec __user *``) - a pointer to a varying sized integral type (``time_t``, ``off_t``, ``long``, ...) - a pointer to a struct containing a varying sized integral type.
The second situation that requires a compatibility layer is if one of thesystem call's arguments has a type that is explicitly 64-bit even on a 32-bitarchitecture, for example ``loff_t`` or ``__u64``. In this case, a value thatarrives at a 64-bit kernel from a 32-bit application will be split into two32-bit values, which then need to be re-assembled in the compatibility layer.
(Note that a system call argument that's a pointer to an explicit 64-bit typedoes **not** need a compatibility layer; for example, :manpage:`splice(2)`'s arguments oftype ``loff_t __user *`` do not trigger the need for a ``compat_`` system call.)
The compatibility version of the system call is called ``compat_sys_xyzzy()``,and is added with the ``COMPAT_SYSCALL_DEFINEn()`` macro, analogously toSYSCALL_DEFINEn. This version of the implementation runs as part of a 64-bitkernel, but expects to receive 32-bit parameter values and does whatever isneeded to deal with them. (Typically, the ``compat_sys_`` version converts thevalues to 64-bit versions and either calls on to the ``sys_`` version, or both ofthem call a common inner implementation function.)
The compat entry point also needs a corresponding function prototype, in``include/linux/compat.h``, marked as asmlinkage to match the way that systemcalls are invoked::
asmlinkage long compat_sys_xyzzy(...);
If the system call involves a structure that is laid out differently on 32-bitand 64-bit systems, say ``struct xyzzy_args``, then the include/linux/compat.hheader file should also include a compat version of the structure (``structcompat_xyzzy_args``) where each variable-size field has the appropriate``compat_`` type that corresponds to the type in ``struct xyzzy_args``. The``compat_sys_xyzzy()`` routine can then use this ``compat_`` structure toparse the arguments from a 32-bit invocation.
For example, if there are fields::
struct xyzzy_args { const char __user *ptr; __kernel_long_t varying_val; u64 fixed_val; /* ... */ };
in struct xyzzy_args, then struct compat_xyzzy_args would have::
struct compat_xyzzy_args { compat_uptr_t ptr; compat_long_t varying_val; u64 fixed_val; /* ... */ };
The generic system call list also needs adjusting to allow for the compatversion; the entry in ``include/uapi/asm-generic/unistd.h`` should use``__SC_COMP`` rather than ``__SYSCALL``::
#define __NR_xyzzy 292 __SC_COMP(__NR_xyzzy, sys_xyzzy, compat_sys_xyzzy)
To summarize, you need:
- a ``COMPAT_SYSCALL_DEFINEn(xyzzy, ...)`` for the compat entry point - corresponding prototype in ``include/linux/compat.h`` - (if needed) 32-bit mapping struct in ``include/linux/compat.h`` - instance of ``__SC_COMP`` not ``__SYSCALL`` in ``include/uapi/asm-generic/unistd.h``
Since 6.11~~~~~~~~~~
This applies to all the architectures listed in :ref:`Since 6.11<syscall_generic_6_11>`under "Generic System Call Implementation", except arm64. See:ref:`Compatibility System Calls (arm64)<compat_arm64>` for more information.
You need to extend the entry in ``scripts/syscall.tbl`` with an extra columnto indicate that a 32-bit userspace program running on a 64-bit kernel shouldhit the compat entry point::
468 common xyzzy sys_xyzzy compat_sys_xyzzy
To summarize, you need:
- ``COMPAT_SYSCALL_DEFINEn(xyzzy, ...)`` for the compat entry point - corresponding prototype in ``include/linux/compat.h`` - modification of the entry in ``scripts/syscall.tbl`` to include an extra "compat" column - (if needed) 32-bit mapping struct in ``include/linux/compat.h``
.. _compat_arm64:
Compatibility System Calls (arm64)^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
On arm64, there is a dedicated syscall table for compatibility system callstargeting 32-bit (AArch32) userspace: ``arch/arm64/tools/syscall_32.tbl``.You need to add an additional line to this table specifying the compatentry point::
468 common xyzzy sys_xyzzy compat_sys_xyzzy
Compatibility System Calls (x86)--------------------------------
To wire up the x86 architecture of a system call with a compatibility version,the entries in the syscall tables need to be adjusted.
First, the entry in ``arch/x86/entry/syscalls/syscall_32.tbl`` gets an extracolumn to indicate that a 32-bit userspace program running on a 64-bit kernelshould hit the compat entry point::
380 i386 xyzzy sys_xyzzy __ia32_compat_sys_xyzzy
Second, you need to figure out what should happen for the x32 ABI version ofthe new system call. There's a choice here: the layout of the argumentsshould either match the 64-bit version or the 32-bit version.
If there's a pointer-to-a-pointer involved, the decision is easy: x32 isILP32, so the layout should match the 32-bit version, and the entry in``arch/x86/entry/syscalls/syscall_64.tbl`` is split so that x32 programs hitthe compatibility wrapper::
333 64 xyzzy sys_xyzzy ... 555 x32 xyzzy __x32_compat_sys_xyzzy
If no pointers are involved, then it is preferable to reuse the 64-bit systemcall for the x32 ABI (and consequently the entry inarch/x86/entry/syscalls/syscall_64.tbl is unchanged).
In either case, you should check that the types involved in your argumentlayout do indeed map exactly from x32 (-mx32) to either the 32-bit (-m32) or64-bit (-m64) equivalents.
System Calls Returning Elsewhere--------------------------------
For most system calls, once the system call is complete the user programcontinues exactly where it left off -- at the next instruction, with thestack the same and most of the registers the same as before the system call,and with the same virtual memory space.
However, a few system calls do things differently. They might return to adifferent location (``rt_sigreturn``) or change the memory space(``fork``/``vfork``/``clone``) or even architecture (``execve``/``execveat``)of the program.
To allow for this, the kernel implementation of the system call may need tosave and restore additional registers to the kernel stack, allowing completecontrol of where and how execution continues after the system call.
This is arch-specific, but typically involves defining assembly entry pointsthat save/restore additional registers and invoke the real system call entrypoint.
For x86_64, this is implemented as a ``stub_xyzzy`` entry point in``arch/x86/entry/entry_64.S``, and the entry in the syscall table(``arch/x86/entry/syscalls/syscall_64.tbl``) is adjusted to match::
333 common xyzzy stub_xyzzy
The equivalent for 32-bit programs running on a 64-bit kernel is normallycalled ``stub32_xyzzy`` and implemented in ``arch/x86/entry/entry_64_compat.S``,with the corresponding syscall table adjustment in``arch/x86/entry/syscalls/syscall_32.tbl``::
380 i386 xyzzy sys_xyzzy stub32_xyzzy
If the system call needs a compatibility layer (as in the previous section)then the ``stub32_`` version needs to call on to the ``compat_sys_`` versionof the system call rather than the native 64-bit version. Also, if the x32 ABIimplementation is not common with the x86_64 version, then its syscalltable will also need to invoke a stub that calls on to the ``compat_sys_``version.
For completeness, it's also nice to set up a mapping so that user-mode Linuxstill works -- its syscall table will reference stub_xyzzy, but the UML builddoesn't include ``arch/x86/entry/entry_64.S`` implementation (because UMLsimulates registers etc). Fixing this is as simple as adding a #define to``arch/x86/um/sys_call_table_64.c``::
#define stub_xyzzy sys_xyzzy
Other Details-------------
Most of the kernel treats system calls in a generic way, but there is theoccasional exception that may need updating for your particular system call.
The audit subsystem is one such special case; it includes (arch-specific)functions that classify some special types of system call -- specificallyfile open (``open``/``openat``), program execution (``execve``/``exeveat``) orsocket multiplexor (``socketcall``) operations. If your new system call isanalogous to one of these, then the audit system should be updated.
More generally, if there is an existing system call that is analogous to yournew system call, it's worth doing a kernel-wide grep for the existing systemcall to check there are no other special cases.
Testing-------
A new system call should obviously be tested; it is also useful to providereviewers with a demonstration of how user space programs will use the systemcall. A good way to combine these aims is to include a simple self-testprogram in a new directory under ``tools/testing/selftests/``.
For a new system call, there will obviously be no libc wrapper function and sothe test will need to invoke it using ``syscall()``; also, if the system callinvolves a new userspace-visible structure, the corresponding header will needto be installed to compile the test.
Make sure the selftest runs successfully on all supported architectures. Forexample, check that it works when compiled as an x86_64 (-m64), x86_32 (-m32)and x32 (-mx32) ABI program.
For more extensive and thorough testing of new functionality, you should alsoconsider adding tests to the Linux Test Project, or to the xfstests projectfor filesystem-related changes.
- https://linux-test-project.github.io/ - git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git
Man Page--------
All new system calls should come with a complete man page, ideally using groffmarkup, but plain text will do. If groff is used, it's helpful to include apre-rendered ASCII version of the man page in the cover email for thepatchset, for the convenience of reviewers.
The man page should be cc'ed to linux-man@vger.kernel.orgFor more details, see https://www.kernel.org/doc/man-pages/patches.html
Do not call System Calls in the Kernel--------------------------------------
System calls are, as stated above, interaction points between userspace andthe kernel. Therefore, system call functions such as ``sys_xyzzy()`` or``compat_sys_xyzzy()`` should only be called from userspace via the syscalltable, but not from elsewhere in the kernel. If the syscall functionality isuseful to be used within the kernel, needs to be shared between an old and anew syscall, or needs to be shared between a syscall and its compatibilityvariant, it should be implemented by means of a "helper" function (such as``ksys_xyzzy()``). This kernel function may then be called within thesyscall stub (``sys_xyzzy()``), the compatibility syscall stub(``compat_sys_xyzzy()``), and/or other kernel code.
At least on 64-bit x86, it will be a hard requirement from v4.17 onwards to notcall system call functions in the kernel. It uses a different callingconvention for system calls where ``struct pt_regs`` is decoded on-the-fly in asyscall wrapper which then hands processing over to the actual syscall function.This means that only those parameters which are actually needed for a specificsyscall are passed on during syscall entry, instead of filling in six CPUregisters with random user space content all the time (which may cause serioustrouble down the call chain).
Moreover, rules on how data may be accessed may differ between kernel data anduser data. This is another reason why calling ``sys_xyzzy()`` is generally abad idea.
Exceptions to this rule are only allowed in architecture-specific overrides,architecture-specific compatibility wrappers, or other code in arch/.
References and Sources----------------------
- LWN article from Michael Kerrisk on use of flags argument in system calls: https://lwn.net/Articles/585415/ - LWN article from Michael Kerrisk on how to handle unknown flags in a system call: https://lwn.net/Articles/588444/ - LWN article from Jake Edge describing constraints on 64-bit system call arguments: https://lwn.net/Articles/311630/ - Pair of LWN articles from David Drysdale that describe the system call implementation paths in detail for v3.14:
- https://lwn.net/Articles/604287/ - https://lwn.net/Articles/604515/
- Architecture-specific requirements for system calls are discussed in the :manpage:`syscall(2)` man-page: http://man7.org/linux/man-pages/man2/syscall.2.html#NOTES - Collated emails from Linus Torvalds discussing the problems with ``ioctl()``: https://yarchive.net/comp/linux/ioctl.html - "How to not invent kernel interfaces", Arnd Bergmann, https://www.ukuug.org/events/linux2007/2007/papers/Bergmann.pdf - LWN article from Michael Kerrisk on avoiding new uses of CAP_SYS_ADMIN: https://lwn.net/Articles/486306/ - Recommendation from Andrew Morton that all related information for a new system call should come in the same email thread: https://lore.kernel.org/r/20140724144747.3041b208832bbdf9fbce5d96@linux-foundation.org - Recommendation from Michael Kerrisk that a new system call should come with a man page: https://lore.kernel.org/r/CAKgNAkgMA39AfoSoA5Pe1r9N+ZzfYQNvNPvcRN7tOvRb8+v06Q@mail.gmail.com - Suggestion from Thomas Gleixner that x86 wire-up should be in a separate commit: https://lore.kernel.org/r/alpine.DEB.2.11.1411191249560.3909@nanos - Suggestion from Greg Kroah-Hartman that it's good for new system calls to come with a man-page & selftest: https://lore.kernel.org/r/20140320025530.GA25469@kroah.com - Discussion from Michael Kerrisk of new system call vs. :manpage:`prctl(2)` extension: https://lore.kernel.org/r/CAHO5Pa3F2MjfTtfNxa8LbnkeeU8=YJ+9tDqxZpw7Gz59E-4AUg@mail.gmail.com - Suggestion from Ingo Molnar that system calls that involve multiple arguments should encapsulate those arguments in a struct, which includes a size field for future extensibility: https://lore.kernel.org/r/20150730083831.GA22182@gmail.com - Numbering oddities arising from (re-)use of O_* numbering space flags:
- commit 75069f2b5bfb ("vfs: renumber FMODE_NONOTIFY and add to uniqueness check") - commit 12ed2e36c98a ("fanotify: FMODE_NONOTIFY and __O_SYNC in sparc conflict") - commit bb458c644a59 ("Safer ABI for O_TMPFILE")
- Discussion from Matthew Wilcox about restrictions on 64-bit arguments: https://lore.kernel.org/r/20081212152929.GM26095@parisc-linux.org - Recommendation from Greg Kroah-Hartman that unknown flags should be policed: https://lore.kernel.org/r/20140717193330.GB4703@kroah.com - Recommendation from Linus Torvalds that x32 system calls should prefer compatibility with 64-bit versions rather than 32-bit versions: https://lore.kernel.org/r/CA+55aFxfmwfB7jbbrXxa=K7VBYPfAvmu3XOkGrLbB1UFjX1+Ew@mail.gmail.com - Patch series revising system call table infrastructure to use scripts/syscall.tbl across multiple architectures: https://lore.kernel.org/lkml/20240704143611.2979589-1-arnd@kernel.org