Something went wrong. Try again.
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103/* SPDX-License-Identifier: GPL-2.0-or-later *//* * Framework and drivers for configuring and reading different PHYs * Based on code in sungem_phy.c and (long-removed) gianfar_phy.c * * Author: Andy Fleming * * Copyright (c) 2004 Freescale Semiconductor, Inc. */
#ifndef __PHY_H#define __PHY_H
#include <linux/compiler.h>#include <linux/spinlock.h>#include <linux/ethtool.h>#include <linux/leds.h>#include <linux/linkmode.h>#include <linux/netlink.h>#include <linux/mdio.h>#include <linux/mii.h>#include <linux/mii_timestamper.h>#include <linux/module.h>#include <linux/timer.h>#include <linux/workqueue.h>#include <linux/mod_devicetable.h>#include <linux/u64_stats_sync.h>#include <linux/irqreturn.h>#include <linux/iopoll.h>#include <linux/refcount.h>
#include <linux/atomic.h>#include <net/eee.h>
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1s_p2mp_features) __ro_after_init;extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init;extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap2_features) __ro_after_init;
#define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features)#define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features)#define PHY_BASIC_T1S_P2MP_FEATURES ((unsigned long *)&phy_basic_t1s_p2mp_features)#define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features)#define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features)#define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features)#define PHY_EEE_CAP1_FEATURES ((unsigned long *)&phy_eee_cap1_features)#define PHY_EEE_CAP2_FEATURES ((unsigned long *)&phy_eee_cap2_features)
extern const int phy_basic_ports_array[3];
/* * Set phydev->irq to PHY_POLL if interrupts are not supported, * or not desired for this PHY. Set to PHY_MAC_INTERRUPT if * the attached MAC driver handles the interrupt */#define PHY_POLL -1#define PHY_MAC_INTERRUPT -2
#define PHY_IS_INTERNAL 0x00000001#define PHY_RST_AFTER_CLK_EN 0x00000002#define PHY_POLL_CABLE_TEST 0x00000004#define PHY_ALWAYS_CALL_SUSPEND 0x00000008#define MDIO_DEVICE_IS_PHY 0x80000000
/** * enum phy_interface_t - Interface Mode definitions * * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch * @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined * @PHY_INTERFACE_MODE_MII: Media-independent interface * @PHY_INTERFACE_MODE_GMII: Gigabit media-independent interface * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface * @PHY_INTERFACE_MODE_TBI: Ten Bit Interface * @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface * @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface * @PHY_INTERFACE_MODE_REVRMII: Reduced Media Independent Interface in PHY role * @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface * @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay * @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay * @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal TX delay * @PHY_INTERFACE_MODE_RTBI: Reduced TBI * @PHY_INTERFACE_MODE_SMII: Serial MII * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax * @PHY_INTERFACE_MODE_PSGMII: Penta SGMII * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX * @PHY_INTERFACE_MODE_5GBASER: 5G BaseR * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR * @PHY_INTERFACE_MODE_25GBASER: 25G BaseR * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN * @PHY_INTERFACE_MODE_10G_QXGMII: 10G-QXGMII - 4 ports over 10G USXGMII * @PHY_INTERFACE_MODE_MAX: Book keeping * * Describes the interface between the MAC and PHY. */typedef enum { PHY_INTERFACE_MODE_NA, PHY_INTERFACE_MODE_INTERNAL, PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_REVMII, PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_REVRMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_RGMII_ID, PHY_INTERFACE_MODE_RGMII_RXID, PHY_INTERFACE_MODE_RGMII_TXID, PHY_INTERFACE_MODE_RTBI, PHY_INTERFACE_MODE_SMII, PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_XLGMII, PHY_INTERFACE_MODE_MOCA, PHY_INTERFACE_MODE_PSGMII, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, PHY_INTERFACE_MODE_100BASEX, PHY_INTERFACE_MODE_1000BASEX, PHY_INTERFACE_MODE_2500BASEX, PHY_INTERFACE_MODE_5GBASER, PHY_INTERFACE_MODE_RXAUI, PHY_INTERFACE_MODE_XAUI, /* 10GBASE-R, XFI, SFI - single lane 10G Serdes */ PHY_INTERFACE_MODE_10GBASER, PHY_INTERFACE_MODE_25GBASER, PHY_INTERFACE_MODE_USXGMII, /* 10GBASE-KR - with Clause 73 AN */ PHY_INTERFACE_MODE_10GKR, PHY_INTERFACE_MODE_QUSGMII, PHY_INTERFACE_MODE_1000BASEKX, PHY_INTERFACE_MODE_10G_QXGMII, PHY_INTERFACE_MODE_MAX,} phy_interface_t;
/* PHY interface mode bitmap handling */#define DECLARE_PHY_INTERFACE_MASK(name) \ DECLARE_BITMAP(name, PHY_INTERFACE_MODE_MAX)
static inline void phy_interface_zero(unsigned long *intf){ bitmap_zero(intf, PHY_INTERFACE_MODE_MAX);}
static inline bool phy_interface_empty(const unsigned long *intf){ return bitmap_empty(intf, PHY_INTERFACE_MODE_MAX);}
static inline void phy_interface_and(unsigned long *dst, const unsigned long *a, const unsigned long *b){ bitmap_and(dst, a, b, PHY_INTERFACE_MODE_MAX);}
static inline void phy_interface_or(unsigned long *dst, const unsigned long *a, const unsigned long *b){ bitmap_or(dst, a, b, PHY_INTERFACE_MODE_MAX);}
static inline void phy_interface_set_rgmii(unsigned long *intf){ __set_bit(PHY_INTERFACE_MODE_RGMII, intf); __set_bit(PHY_INTERFACE_MODE_RGMII_ID, intf); __set_bit(PHY_INTERFACE_MODE_RGMII_RXID, intf); __set_bit(PHY_INTERFACE_MODE_RGMII_TXID, intf);}
/** * phy_modes - map phy_interface_t enum to device tree binding of phy-mode * @interface: enum phy_interface_t value * * Description: maps enum &phy_interface_t defined in this file * into the device tree binding of 'phy-mode', so that Ethernet * device driver can get PHY interface from device tree. */static inline const char *phy_modes(phy_interface_t interface){ switch (interface) { case PHY_INTERFACE_MODE_NA: return ""; case PHY_INTERFACE_MODE_INTERNAL: return "internal"; case PHY_INTERFACE_MODE_MII: return "mii"; case PHY_INTERFACE_MODE_GMII: return "gmii"; case PHY_INTERFACE_MODE_SGMII: return "sgmii"; case PHY_INTERFACE_MODE_TBI: return "tbi"; case PHY_INTERFACE_MODE_REVMII: return "rev-mii"; case PHY_INTERFACE_MODE_RMII: return "rmii"; case PHY_INTERFACE_MODE_REVRMII: return "rev-rmii"; case PHY_INTERFACE_MODE_RGMII: return "rgmii"; case PHY_INTERFACE_MODE_RGMII_ID: return "rgmii-id"; case PHY_INTERFACE_MODE_RGMII_RXID: return "rgmii-rxid"; case PHY_INTERFACE_MODE_RGMII_TXID: return "rgmii-txid"; case PHY_INTERFACE_MODE_RTBI: return "rtbi"; case PHY_INTERFACE_MODE_SMII: return "smii"; case PHY_INTERFACE_MODE_XGMII: return "xgmii"; case PHY_INTERFACE_MODE_XLGMII: return "xlgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; case PHY_INTERFACE_MODE_PSGMII: return "psgmii"; case PHY_INTERFACE_MODE_QSGMII: return "qsgmii"; case PHY_INTERFACE_MODE_TRGMII: return "trgmii"; case PHY_INTERFACE_MODE_1000BASEX: return "1000base-x"; case PHY_INTERFACE_MODE_1000BASEKX: return "1000base-kx"; case PHY_INTERFACE_MODE_2500BASEX: return "2500base-x"; case PHY_INTERFACE_MODE_5GBASER: return "5gbase-r"; case PHY_INTERFACE_MODE_RXAUI: return "rxaui"; case PHY_INTERFACE_MODE_XAUI: return "xaui"; case PHY_INTERFACE_MODE_10GBASER: return "10gbase-r"; case PHY_INTERFACE_MODE_25GBASER: return "25gbase-r"; case PHY_INTERFACE_MODE_USXGMII: return "usxgmii"; case PHY_INTERFACE_MODE_10GKR: return "10gbase-kr"; case PHY_INTERFACE_MODE_100BASEX: return "100base-x"; case PHY_INTERFACE_MODE_QUSGMII: return "qusgmii"; case PHY_INTERFACE_MODE_10G_QXGMII: return "10g-qxgmii"; default: return "unknown"; }}
/** * rgmii_clock - map link speed to the clock rate * @speed: link speed value * * Description: maps RGMII supported link speeds * into the clock rates. * * Returns: clock rate or negative errno */static inline long rgmii_clock(int speed){ switch (speed) { case SPEED_10: return 2500000; case SPEED_100: return 25000000; case SPEED_1000: return 125000000; default: return -EINVAL; }}
#define PHY_MAX_ADDR 32
/* Used when trying to connect to a specific phy (mii bus id:phy device id) */#define PHY_ID_FMT "%s:%02x"#define PHY_ID_SIZE (MII_BUS_ID_SIZE + 3)
#define MII_BUS_ID_SIZE 61
struct device;struct kernel_hwtstamp_config;struct phylink;struct sfp_bus;struct sfp_upstream_ops;struct sk_buff;
/** * struct mdio_bus_stats - Statistics counters for MDIO busses * @transfers: Total number of transfers, i.e. @writes + @reads * @errors: Number of MDIO transfers that returned an error * @writes: Number of write transfers * @reads: Number of read transfers * @syncp: Synchronisation for incrementing statistics */struct mdio_bus_stats { u64_stats_t transfers; u64_stats_t errors; u64_stats_t writes; u64_stats_t reads; /* Must be last, add new statistics above */ struct u64_stats_sync syncp;};
/** * struct mii_bus - Represents an MDIO bus * * @owner: Who owns this device * @name: User friendly name for this MDIO device, or driver name * @id: Unique identifier for this bus, typical from bus hierarchy * @priv: Driver private data * * The Bus class for PHYs. Devices which provide access to * PHYs should register using this structure */struct mii_bus { struct module *owner; const char *name; char id[MII_BUS_ID_SIZE]; void *priv; /** @read: Perform a read transfer on the bus */ int (*read)(struct mii_bus *bus, int addr, int regnum); /** @write: Perform a write transfer on the bus */ int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); /** @read_c45: Perform a C45 read transfer on the bus */ int (*read_c45)(struct mii_bus *bus, int addr, int devnum, int regnum); /** @write_c45: Perform a C45 write transfer on the bus */ int (*write_c45)(struct mii_bus *bus, int addr, int devnum, int regnum, u16 val); /** @reset: Perform a reset of the bus */ int (*reset)(struct mii_bus *bus);
/** @stats: Statistic counters per device on the bus */ struct mdio_bus_stats stats[PHY_MAX_ADDR];
/** * @mdio_lock: A lock to ensure that only one thing can read/write * the MDIO bus at a time */ struct mutex mdio_lock;
/** @parent: Parent device of this bus */ struct device *parent; /** @state: State of bus structure */ enum { MDIOBUS_ALLOCATED = 1, MDIOBUS_REGISTERED, MDIOBUS_UNREGISTERED, MDIOBUS_RELEASED, } state;
/** @dev: Kernel device representation */ struct device dev;
/** @mdio_map: list of all MDIO devices on bus */ struct mdio_device *mdio_map[PHY_MAX_ADDR];
/** @phy_mask: PHY addresses to be ignored when probing */ u32 phy_mask;
/** @phy_ignore_ta_mask: PHY addresses to ignore the TA/read failure */ u32 phy_ignore_ta_mask;
/** * @irq: An array of interrupts, each PHY's interrupt at the index * matching its address */ int irq[PHY_MAX_ADDR];
/** @reset_delay_us: GPIO reset pulse width in microseconds */ int reset_delay_us; /** @reset_post_delay_us: GPIO reset deassert delay in microseconds */ int reset_post_delay_us; /** @reset_gpiod: Reset GPIO descriptor pointer */ struct gpio_desc *reset_gpiod;
/** @shared_lock: protect access to the shared element */ struct mutex shared_lock;
/** @shared: shared state across different PHYs */ struct phy_package_shared *shared[PHY_MAX_ADDR];};#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
struct mii_bus *mdiobus_alloc_size(size_t size);
/** * mdiobus_alloc - Allocate an MDIO bus structure * * The internal state of the MDIO bus will be set of MDIOBUS_ALLOCATED ready * for the driver to register the bus. */static inline struct mii_bus *mdiobus_alloc(void){ return mdiobus_alloc_size(0);}
int __mdiobus_register(struct mii_bus *bus, struct module *owner);int __devm_mdiobus_register(struct device *dev, struct mii_bus *bus, struct module *owner);#define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE)#define devm_mdiobus_register(dev, bus) \ __devm_mdiobus_register(dev, bus, THIS_MODULE)
void mdiobus_unregister(struct mii_bus *bus);void mdiobus_free(struct mii_bus *bus);struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv);static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev){ return devm_mdiobus_alloc_size(dev, 0);}
struct mii_bus *mdio_find_bus(const char *mdio_name);struct phy_device *mdiobus_scan_c22(struct mii_bus *bus, int addr);
#define PHY_INTERRUPT_DISABLED false#define PHY_INTERRUPT_ENABLED true
/** * enum phy_state - PHY state machine states: * * @PHY_DOWN: PHY device and driver are not ready for anything. probe * should be called if and only if the PHY is in this state, * given that the PHY device exists. * - PHY driver probe function will set the state to @PHY_READY * * @PHY_READY: PHY is ready to send and receive packets, but the * controller is not. By default, PHYs which do not implement * probe will be set to this state by phy_probe(). * - start will set the state to UP * * @PHY_UP: The PHY and attached device are ready to do work. * Interrupts should be started here. * - timer moves to @PHY_NOLINK or @PHY_RUNNING * * @PHY_NOLINK: PHY is up, but not currently plugged in. * - irq or timer will set @PHY_RUNNING if link comes back * - phy_stop moves to @PHY_HALTED * * @PHY_RUNNING: PHY is currently up, running, and possibly sending * and/or receiving packets * - irq or timer will set @PHY_NOLINK if link goes down * - phy_stop moves to @PHY_HALTED * * @PHY_CABLETEST: PHY is performing a cable test. Packet reception/sending * is not expected to work, carrier will be indicated as down. PHY will be * poll once per second, or on interrupt for it current state. * Once complete, move to UP to restart the PHY. * - phy_stop aborts the running test and moves to @PHY_HALTED * * @PHY_HALTED: PHY is up, but no polling or interrupts are done. * - phy_start moves to @PHY_UP * * @PHY_ERROR: PHY is up, but is in an error state. * - phy_stop moves to @PHY_HALTED */enum phy_state { PHY_DOWN = 0, PHY_READY, PHY_HALTED, PHY_ERROR, PHY_UP, PHY_RUNNING, PHY_NOLINK, PHY_CABLETEST,};
#define MDIO_MMD_NUM 32
/** * struct phy_c45_device_ids - 802.3-c45 Device Identifiers * @devices_in_package: IEEE 802.3 devices in package register value. * @mmds_present: bit vector of MMDs present. * @device_ids: The device identifer for each present device. */struct phy_c45_device_ids { u32 devices_in_package; u32 mmds_present; u32 device_ids[MDIO_MMD_NUM];};
struct macsec_context;struct macsec_ops;
/** * struct phy_device - An instance of a PHY * * @mdio: MDIO bus this PHY is on * @drv: Pointer to the driver for this PHY instance * @devlink: Create a link between phy dev and mac dev, if the external phy * used by current mac interface is managed by another mac interface. * @phyindex: Unique id across the phy's parent tree of phys to address the PHY * from userspace, similar to ifindex. A zero index means the PHY * wasn't assigned an id yet. * @phy_id: UID for this device found during discovery * @c45_ids: 802.3-c45 Device Identifiers if is_c45. * @is_c45: Set to true if this PHY uses clause 45 addressing. * @is_internal: Set to true if this PHY is internal to a MAC. * @is_pseudo_fixed_link: Set to true if this PHY is an Ethernet switch, etc. * @is_gigabit_capable: Set to true if PHY supports 1000Mbps * @has_fixups: Set to true if this PHY has fixups/quirks. * @suspended: Set to true if this PHY has been suspended successfully. * @suspended_by_mdio_bus: Set to true if this PHY was suspended by MDIO bus. * @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. * @loopback_enabled: Set true if this PHY has been loopbacked successfully. * @downshifted_rate: Set true if link speed has been downshifted. * @is_on_sfp_module: Set true if PHY is located on an SFP module. * @mac_managed_pm: Set true if MAC driver takes of suspending/resuming PHY * @wol_enabled: Set to true if the PHY or the attached MAC have Wake-on-LAN * enabled. * @state: State of the PHY for management purposes * @dev_flags: Device-specific flags used by the PHY driver. * * - Bits [15:0] are free to use by the PHY driver to communicate * driver specific behavior. * - Bits [23:16] are currently reserved for future use. * - Bits [31:24] are reserved for defining generic * PHY driver behavior. * @irq: IRQ number of the PHY's interrupt (-1 if none) * @phylink: Pointer to phylink instance for this PHY * @sfp_bus_attached: Flag indicating whether the SFP bus has been attached * @sfp_bus: SFP bus attached to this PHY's fiber port * @attached_dev: The attached enet driver's device instance ptr * @adjust_link: Callback for the enet controller to respond to changes: in the * link state. * @phy_link_change: Callback for phylink for notification of link change * @macsec_ops: MACsec offloading ops. * * @speed: Current link speed * @duplex: Current duplex * @port: Current port * @pause: Current pause * @asym_pause: Current asymmetric pause * @supported: Combined MAC/PHY supported linkmodes * @advertising: Currently advertised linkmodes * @adv_old: Saved advertised while power saving for WoL * @supported_eee: supported PHY EEE linkmodes * @advertising_eee: Currently advertised EEE linkmodes * @enable_tx_lpi: When True, MAC should transmit LPI to PHY * @eee_active: phylib private state, indicating that EEE has been negotiated * @eee_cfg: User configuration of EEE * @lp_advertising: Current link partner advertised linkmodes * @host_interfaces: PHY interface modes supported by host * @eee_disabled_modes: Energy efficient ethernet modes not to be advertised * @autoneg: Flag autoneg being used * @rate_matching: Current rate matching mode * @link: Current link state * @autoneg_complete: Flag auto negotiation of the link has completed * @mdix: Current crossover * @mdix_ctrl: User setting of crossover * @pma_extable: Cached value of PMA/PMD Extended Abilities Register * @interrupts: Flag interrupts have been enabled * @irq_suspended: Flag indicating PHY is suspended and therefore interrupt * handling shall be postponed until PHY has resumed * @irq_rerun: Flag indicating interrupts occurred while PHY was suspended, * requiring a rerun of the interrupt handler after resume * @default_timestamp: Flag indicating whether we are using the phy * timestamp as the default one * @interface: enum phy_interface_t value * @possible_interfaces: bitmap if interface modes that the attached PHY * will switch between depending on media speed. * @skb: Netlink message for cable diagnostics * @nest: Netlink nest used for cable diagnostics * @ehdr: nNtlink header for cable diagnostics * @phy_led_triggers: Array of LED triggers * @phy_num_led_triggers: Number of triggers in @phy_led_triggers * @led_link_trigger: LED trigger for link up/down * @last_triggered: last LED trigger for link speed * @leds: list of PHY LED structures * @master_slave_set: User requested master/slave configuration * @master_slave_get: Current master/slave advertisement * @master_slave_state: Current master/slave configuration * @mii_ts: Pointer to time stamper callbacks * @psec: Pointer to Power Sourcing Equipment control struct * @lock: Mutex for serialization access to PHY * @state_queue: Work queue for state machine * @link_down_events: Number of times link was lost * @shared: Pointer to private data shared by phys in one package * @priv: Pointer to driver private data * * interrupts currently only supports enabled or disabled, * but could be changed in the future to support enabling * and disabling specific interrupts * * Contains some infrastructure for polling and interrupt * handling, as well as handling shifts in PHY hardware state */struct phy_device { struct mdio_device mdio;
/* Information about the PHY type */ /* And management functions */ const struct phy_driver *drv;
struct device_link *devlink;
u32 phyindex; u32 phy_id;
struct phy_c45_device_ids c45_ids; unsigned is_c45:1; unsigned is_internal:1; unsigned is_pseudo_fixed_link:1; unsigned is_gigabit_capable:1; unsigned has_fixups:1; unsigned suspended:1; unsigned suspended_by_mdio_bus:1; unsigned sysfs_links:1; unsigned loopback_enabled:1; unsigned downshifted_rate:1; unsigned is_on_sfp_module:1; unsigned mac_managed_pm:1; unsigned wol_enabled:1;
unsigned autoneg:1; /* The most recently read link state */ unsigned link:1; unsigned autoneg_complete:1;
/* Interrupts are enabled */ unsigned interrupts:1; unsigned irq_suspended:1; unsigned irq_rerun:1;
unsigned default_timestamp:1;
int rate_matching;
enum phy_state state;
u32 dev_flags;
phy_interface_t interface; DECLARE_PHY_INTERFACE_MASK(possible_interfaces);
/* * forced speed & duplex (no autoneg) * partner speed & duplex & pause (autoneg) */ int speed; int duplex; int port; int pause; int asym_pause; u8 master_slave_get; u8 master_slave_set; u8 master_slave_state;
/* Union of PHY and Attached devices' supported link modes */ /* See ethtool.h for more info */ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); /* used with phy_speed_down */ __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old); /* used for eee validation and configuration*/ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported_eee); __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising_eee); /* Energy efficient ethernet modes which should be prohibited */ __ETHTOOL_DECLARE_LINK_MODE_MASK(eee_disabled_modes); bool enable_tx_lpi; bool eee_active; struct eee_config eee_cfg;
/* Host supported PHY interface types. Should be ignored if empty. */ DECLARE_PHY_INTERFACE_MASK(host_interfaces);
#ifdef CONFIG_LED_TRIGGER_PHY struct phy_led_trigger *phy_led_triggers; unsigned int phy_num_led_triggers; struct phy_led_trigger *last_triggered;
struct phy_led_trigger *led_link_trigger;#endif struct list_head leds;
/* * Interrupt number for this PHY * -1 means no interrupt */ int irq;
/* private data pointer */ /* For use by PHYs to maintain extra state */ void *priv;
/* shared data pointer */ /* For use by PHYs inside the same package that need a shared state. */ struct phy_package_shared *shared;
/* Reporting cable test results */ struct sk_buff *skb; void *ehdr; struct nlattr *nest;
/* Interrupt and Polling infrastructure */ struct delayed_work state_queue;
struct mutex lock;
/* This may be modified under the rtnl lock */ bool sfp_bus_attached; struct sfp_bus *sfp_bus; struct phylink *phylink; struct net_device *attached_dev; struct mii_timestamper *mii_ts; struct pse_control *psec;
u8 mdix; u8 mdix_ctrl;
int pma_extable;
unsigned int link_down_events;
void (*phy_link_change)(struct phy_device *phydev, bool up); void (*adjust_link)(struct net_device *dev);
#if IS_ENABLED(CONFIG_MACSEC) /* MACsec management functions */ const struct macsec_ops *macsec_ops;#endif};
/* Generic phy_device::dev_flags */#define PHY_F_NO_IRQ 0x80000000#define PHY_F_RXC_ALWAYS_ON 0x40000000
#define to_phy_device(__dev) container_of_const(to_mdio_device(__dev), struct phy_device, mdio)
/** * struct phy_tdr_config - Configuration of a TDR raw test * * @first: Distance for first data collection point * @last: Distance for last data collection point * @step: Step between data collection points * @pair: Bitmap of cable pairs to collect data for * * A structure containing possible configuration parameters * for a TDR cable test. The driver does not need to implement * all the parameters, but should report what is actually used. * All distances are in centimeters. */struct phy_tdr_config { u32 first; u32 last; u32 step; s8 pair;};#define PHY_PAIR_ALL -1
/** * enum link_inband_signalling - in-band signalling modes that are supported * * @LINK_INBAND_DISABLE: in-band signalling can be disabled * @LINK_INBAND_ENABLE: in-band signalling can be enabled without bypass * @LINK_INBAND_BYPASS: in-band signalling can be enabled with bypass * * The possible and required bits can only be used if the valid bit is set. * If possible is clear, that means inband signalling can not be used. * Required is only valid when possible is set, and means that inband * signalling must be used. */enum link_inband_signalling { LINK_INBAND_DISABLE = BIT(0), LINK_INBAND_ENABLE = BIT(1), LINK_INBAND_BYPASS = BIT(2),};
/** * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision * Avoidance) Reconciliation Sublayer. * * @version: read-only PLCA register map version. -1 = not available. Ignored * when setting the configuration. Format is the same as reported by the PLCA * IDVER register (31.CA00). -1 = not available. * @enabled: PLCA configured mode (enabled/disabled). -1 = not available / don't * set. 0 = disabled, anything else = enabled. * @node_id: the PLCA local node identifier. -1 = not available / don't set. * Allowed values [0 .. 254]. 255 = node disabled. * @node_cnt: the PLCA node count (maximum number of nodes having a TO). Only * meaningful for the coordinator (node_id = 0). -1 = not available / don't * set. Allowed values [1 .. 255]. * @to_tmr: The value of the PLCA to_timer in bit-times, which determines the * PLCA transmit opportunity window opening. See IEEE802.3 Clause 148 for * more details. The to_timer shall be set equal over all nodes. * -1 = not available / don't set. Allowed values [0 .. 255]. * @burst_cnt: controls how many additional frames a node is allowed to send in * single transmit opportunity (TO). The default value of 0 means that the * node is allowed exactly one frame per TO. A value of 1 allows two frames * per TO, and so on. -1 = not available / don't set. * Allowed values [0 .. 255]. * @burst_tmr: controls how many bit times to wait for the MAC to send a new * frame before interrupting the burst. This value should be set to a value * greater than the MAC inter-packet gap (which is typically 96 bits). * -1 = not available / don't set. Allowed values [0 .. 255]. * * A structure containing configuration parameters for setting/getting the PLCA * RS configuration. The driver does not need to implement all the parameters, * but should report what is actually used. */struct phy_plca_cfg { int version; int enabled; int node_id; int node_cnt; int to_tmr; int burst_cnt; int burst_tmr;};
/** * struct phy_plca_status - Status of the PLCA (Physical Layer Collision * Avoidance) Reconciliation Sublayer. * * @pst: The PLCA status as reported by the PST bit in the PLCA STATUS * register(31.CA03), indicating BEACON activity. * * A structure containing status information of the PLCA RS configuration. * The driver does not need to implement all the parameters, but should report * what is actually used. */struct phy_plca_status { bool pst;};
/* Modes for PHY LED configuration */enum phy_led_modes { PHY_LED_ACTIVE_HIGH = 0, PHY_LED_ACTIVE_LOW = 1, PHY_LED_INACTIVE_HIGH_IMPEDANCE = 2,
/* keep it last */ __PHY_LED_MODES_NUM,};
/** * struct phy_led: An LED driven by the PHY * * @list: List of LEDs * @phydev: PHY this LED is attached to * @led_cdev: Standard LED class structure * @index: Number of the LED */struct phy_led { struct list_head list; struct phy_device *phydev; struct led_classdev led_cdev; u8 index;};
#define to_phy_led(d) container_of(d, struct phy_led, led_cdev)
/** * struct phy_driver - Driver structure for a particular PHY type * * @mdiodrv: Data common to all MDIO devices * @phy_id: The result of reading the UID registers of this PHY * type, and ANDing them with the phy_id_mask. This driver * only works for PHYs with IDs which match this field * @name: The friendly name of this PHY type * @phy_id_mask: Defines the important bits of the phy_id * @features: A mandatory list of features (speed, duplex, etc) * supported by this PHY * @flags: A bitfield defining certain other features this PHY * supports (like interrupts) * @driver_data: Static driver data * * All functions are optional. If config_aneg or read_status * are not implemented, the phy core uses the genphy versions. * Note that none of these functions should be called from * interrupt time. The goal is for the bus read/write functions * to be able to block when the bus transaction is happening, * and be freed up by an interrupt (The MPC85xx has this ability, * though it is not currently supported in the driver). */struct phy_driver { struct mdio_driver_common mdiodrv; u32 phy_id; char *name; u32 phy_id_mask; const unsigned long * const features; u32 flags; const void *driver_data;
/** * @soft_reset: Called to issue a PHY software reset */ int (*soft_reset)(struct phy_device *phydev);
/** * @config_init: Called to initialize the PHY, * including after a reset */ int (*config_init)(struct phy_device *phydev);
/** * @probe: Called during discovery. Used to set * up device-specific structures, if any */ int (*probe)(struct phy_device *phydev);
/** * @get_features: Probe the hardware to determine what * abilities it has. Should only set phydev->supported. */ int (*get_features)(struct phy_device *phydev);
/** * @inband_caps: query whether in-band is supported for the given PHY * interface mode. Returns a bitmask of bits defined by enum * link_inband_signalling. */ unsigned int (*inband_caps)(struct phy_device *phydev, phy_interface_t interface);
/** * @config_inband: configure in-band mode for the PHY */ int (*config_inband)(struct phy_device *phydev, unsigned int modes);
/** * @get_rate_matching: Get the supported type of rate matching for a * particular phy interface. This is used by phy consumers to determine * whether to advertise lower-speed modes for that interface. It is * assumed that if a rate matching mode is supported on an interface, * then that interface's rate can be adapted to all slower link speeds * supported by the phy. If the interface is not supported, this should * return %RATE_MATCH_NONE. */ int (*get_rate_matching)(struct phy_device *phydev, phy_interface_t iface);
/* PHY Power Management */ /** @suspend: Suspend the hardware, saving state if needed */ int (*suspend)(struct phy_device *phydev); /** @resume: Resume the hardware, restoring state if needed */ int (*resume)(struct phy_device *phydev);
/** * @config_aneg: Configures the advertisement and resets * autonegotiation if phydev->autoneg is on, * forces the speed to the current settings in phydev * if phydev->autoneg is off */ int (*config_aneg)(struct phy_device *phydev);
/** @aneg_done: Determines the auto negotiation result */ int (*aneg_done)(struct phy_device *phydev);
/** @read_status: Determines the negotiated speed and duplex */ int (*read_status)(struct phy_device *phydev);
/** * @config_intr: Enables or disables interrupts. * It should also clear any pending interrupts prior to enabling the * IRQs and after disabling them. */ int (*config_intr)(struct phy_device *phydev);
/** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev);
/** @remove: Clears up any memory if needed */ void (*remove)(struct phy_device *phydev);
/** * @match_phy_device: Returns true if this is a suitable * driver for the given phydev. If NULL, matching is based on * phy_id and phy_id_mask. */ int (*match_phy_device)(struct phy_device *phydev, const struct phy_driver *phydrv);
/** * @set_wol: Some devices (e.g. qnap TS-119P II) require PHY * register changes to enable Wake on LAN, so set_wol is * provided to be called in the ethernet driver's set_wol * function. */ int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
/** * @get_wol: See set_wol, but for checking whether Wake on LAN * is enabled. */ void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
/** * @link_change_notify: Called to inform a PHY device driver * when the core is about to change the link state. This * callback is supposed to be used as fixup hook for drivers * that need to take action when the link state * changes. Drivers are by no means allowed to mess with the * PHY device structure in their implementations. */ void (*link_change_notify)(struct phy_device *dev);
/** * @read_mmd: PHY specific driver override for reading a MMD * register. This function is optional for PHY specific * drivers. When not provided, the default MMD read function * will be used by phy_read_mmd(), which will use either a * direct read for Clause 45 PHYs or an indirect read for * Clause 22 PHYs. devnum is the MMD device number within the * PHY device, regnum is the register within the selected MMD * device. */ int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum);
/** * @write_mmd: PHY specific driver override for writing a MMD * register. This function is optional for PHY specific * drivers. When not provided, the default MMD write function * will be used by phy_write_mmd(), which will use either a * direct write for Clause 45 PHYs, or an indirect write for * Clause 22 PHYs. devnum is the MMD device number within the * PHY device, regnum is the register within the selected MMD * device. val is the value to be written. */ int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, u16 val);
/** @read_page: Return the current PHY register page number */ int (*read_page)(struct phy_device *dev); /** @write_page: Set the current PHY register page number */ int (*write_page)(struct phy_device *dev, int page);
/** * @module_info: Get the size and type of the eeprom contained * within a plug-in module */ int (*module_info)(struct phy_device *dev, struct ethtool_modinfo *modinfo);
/** * @module_eeprom: Get the eeprom information from the plug-in * module */ int (*module_eeprom)(struct phy_device *dev, struct ethtool_eeprom *ee, u8 *data);
/** @cable_test_start: Start a cable test */ int (*cable_test_start)(struct phy_device *dev);
/** @cable_test_tdr_start: Start a raw TDR cable test */ int (*cable_test_tdr_start)(struct phy_device *dev, const struct phy_tdr_config *config);
/** * @cable_test_get_status: Once per second, or on interrupt, * request the status of the test. */ int (*cable_test_get_status)(struct phy_device *dev, bool *finished);
/* Get statistics from the PHY using ethtool */ /** * @get_phy_stats: Retrieve PHY statistics. * @dev: The PHY device for which the statistics are retrieved. * @eth_stats: structure where Ethernet PHY stats will be stored. * @stats: structure where additional PHY-specific stats will be stored. * * Retrieves the supported PHY statistics and populates the provided * structures. The input structures are pre-initialized with * `ETHTOOL_STAT_NOT_SET`, and the driver must only modify members * corresponding to supported statistics. Unmodified members will remain * set to `ETHTOOL_STAT_NOT_SET` and will not be returned to userspace. */ void (*get_phy_stats)(struct phy_device *dev, struct ethtool_eth_phy_stats *eth_stats, struct ethtool_phy_stats *stats);
/** * @get_link_stats: Retrieve link statistics. * @dev: The PHY device for which the statistics are retrieved. * @link_stats: structure where link-specific stats will be stored. * * Retrieves link-related statistics for the given PHY device. The input * structure is pre-initialized with `ETHTOOL_STAT_NOT_SET`, and the * driver must only modify members corresponding to supported * statistics. Unmodified members will remain set to * `ETHTOOL_STAT_NOT_SET` and will not be returned to userspace. */ void (*get_link_stats)(struct phy_device *dev, struct ethtool_link_ext_stats *link_stats);
/** * @update_stats: Trigger periodic statistics updates. * @dev: The PHY device for which statistics updates are triggered. * * Periodically gathers statistics from the PHY device to update locally * maintained 64-bit counters. This is necessary for PHYs that implement * reduced-width counters (e.g., 16-bit or 32-bit) which can overflow * more frequently compared to 64-bit counters. By invoking this * callback, drivers can fetch the current counter values, handle * overflow detection, and accumulate the results into local 64-bit * counters for accurate reporting through the `get_phy_stats` and * `get_link_stats` interfaces. * * Return: 0 on success or a negative error code on failure. */ int (*update_stats)(struct phy_device *dev);
/** @get_sset_count: Number of statistic counters */ int (*get_sset_count)(struct phy_device *dev); /** @get_strings: Names of the statistic counters */ void (*get_strings)(struct phy_device *dev, u8 *data); /** @get_stats: Return the statistic counter values */ void (*get_stats)(struct phy_device *dev, struct ethtool_stats *stats, u64 *data);
/* Get and Set PHY tunables */ /** @get_tunable: Return the value of a tunable */ int (*get_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, void *data); /** @set_tunable: Set the value of a tunable */ int (*set_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, const void *data); /** * @set_loopback: Set the loopback mode of the PHY * enable selects if the loopback mode is enabled or disabled. If the * loopback mode is enabled, then the speed of the loopback mode can be * requested with the speed argument. If the speed argument is zero, * then any speed can be selected. If the speed argument is > 0, then * this speed shall be selected for the loopback mode or EOPNOTSUPP * shall be returned if speed selection is not supported. */ int (*set_loopback)(struct phy_device *dev, bool enable, int speed); /** @get_sqi: Get the signal quality indication */ int (*get_sqi)(struct phy_device *dev); /** @get_sqi_max: Get the maximum signal quality indication */ int (*get_sqi_max)(struct phy_device *dev);
/* PLCA RS interface */ /** @get_plca_cfg: Return the current PLCA configuration */ int (*get_plca_cfg)(struct phy_device *dev, struct phy_plca_cfg *plca_cfg); /** @set_plca_cfg: Set the PLCA configuration */ int (*set_plca_cfg)(struct phy_device *dev, const struct phy_plca_cfg *plca_cfg); /** @get_plca_status: Return the current PLCA status info */ int (*get_plca_status)(struct phy_device *dev, struct phy_plca_status *plca_st);
/** * @led_brightness_set: Set a PHY LED brightness. Index * indicates which of the PHYs led should be set. Value * follows the standard LED class meaning, e.g. LED_OFF, * LED_HALF, LED_FULL. */ int (*led_brightness_set)(struct phy_device *dev, u8 index, enum led_brightness value);
/** * @led_blink_set: Set a PHY LED blinking. Index indicates * which of the PHYs led should be configured to blink. Delays * are in milliseconds and if both are zero then a sensible * default should be chosen. The call should adjust the * timings in that case and if it can't match the values * specified exactly. */ int (*led_blink_set)(struct phy_device *dev, u8 index, unsigned long *delay_on, unsigned long *delay_off); /** * @led_hw_is_supported: Can the HW support the given rules. * @dev: PHY device which has the LED * @index: Which LED of the PHY device * @rules The core is interested in these rules * * Return 0 if yes, -EOPNOTSUPP if not, or an error code. */ int (*led_hw_is_supported)(struct phy_device *dev, u8 index, unsigned long rules); /** * @led_hw_control_set: Set the HW to control the LED * @dev: PHY device which has the LED * @index: Which LED of the PHY device * @rules The rules used to control the LED * * Returns 0, or a an error code. */ int (*led_hw_control_set)(struct phy_device *dev, u8 index, unsigned long rules); /** * @led_hw_control_get: Get how the HW is controlling the LED * @dev: PHY device which has the LED * @index: Which LED of the PHY device * @rules Pointer to the rules used to control the LED * * Set *@rules to how the HW is currently blinking. Returns 0 * on success, or a error code if the current blinking cannot * be represented in rules, or some other error happens. */ int (*led_hw_control_get)(struct phy_device *dev, u8 index, unsigned long *rules);
/** * @led_polarity_set: Set the LED polarity modes * @dev: PHY device which has the LED * @index: Which LED of the PHY device * @modes: bitmap of LED polarity modes * * Configure LED with all the required polarity modes in @modes * to make it correctly turn ON or OFF. * * Returns 0, or an error code. */ int (*led_polarity_set)(struct phy_device *dev, int index, unsigned long modes);
/** * @get_next_update_time: Get the time until the next update event * @dev: PHY device * * Callback to determine the time (in jiffies) until the next * update event for the PHY state machine. Allows PHY drivers to * dynamically adjust polling intervals based on link state or other * conditions. * * Returns the time in jiffies until the next update event. */ unsigned int (*get_next_update_time)(struct phy_device *dev);};#define to_phy_driver(d) container_of_const(to_mdio_common_driver(d), \ struct phy_driver, mdiodrv)
#define PHY_ID_MATCH_EXACT(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 0)#define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4)#define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10)
/** * phy_id_compare - compare @id1 with @id2 taking account of @mask * @id1: first PHY ID * @id2: second PHY ID * @mask: the PHY ID mask, set bits are significant in matching * * Return true if the bits from @id1 and @id2 specified by @mask match. * This uses an equivalent test to (@id & @mask) == (@phy_id & @mask). */static inline bool phy_id_compare(u32 id1, u32 id2, u32 mask){ return !((id1 ^ id2) & mask);}
/** * phydev_id_compare - compare @id with the PHY's Clause 22 ID * @phydev: the PHY device * @id: the PHY ID to be matched * * Compare the @phydev clause 22 ID with the provided @id and return true or * false depending whether it matches, using the bound driver mask. The * @phydev must be bound to a driver. */static inline bool phydev_id_compare(struct phy_device *phydev, u32 id){ return phy_id_compare(id, phydev->phy_id, phydev->drv->phy_id_mask);}
const char *phy_speed_to_str(int speed);const char *phy_duplex_to_str(unsigned int duplex);const char *phy_rate_matching_to_str(int rate_matching);
int phy_interface_num_ports(phy_interface_t interface);
/** * phy_is_started - Convenience function to check whether PHY is started * @phydev: The phy_device struct */static inline bool phy_is_started(struct phy_device *phydev){ return phydev->state >= PHY_UP;}
/** * phy_disable_eee_mode - Don't advertise an EEE mode. * @phydev: The phy_device struct * @link_mode: The EEE mode to be disabled */static inline void phy_disable_eee_mode(struct phy_device *phydev, u32 link_mode){ WARN_ON(phy_is_started(phydev));
linkmode_set_bit(link_mode, phydev->eee_disabled_modes); linkmode_clear_bit(link_mode, phydev->advertising_eee);}
void phy_resolve_aneg_pause(struct phy_device *phydev);void phy_resolve_aneg_linkmode(struct phy_device *phydev);
/** * phy_read - Convenience function for reading a given PHY register * @phydev: the phy_device struct * @regnum: register number to read * * NOTE: MUST NOT be called from interrupt context, * because the bus read/write functions may wait for an interrupt * to conclude the operation. */static inline int phy_read(struct phy_device *phydev, u32 regnum){ return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum);}
#define phy_read_poll_timeout(phydev, regnum, val, cond, sleep_us, \ timeout_us, sleep_before_read) \({ \ int __ret, __val; \ __ret = read_poll_timeout(__val = phy_read, val, \ __val < 0 || (cond), \ sleep_us, timeout_us, sleep_before_read, phydev, regnum); \ if (__val < 0) \ __ret = __val; \ if (__ret) \ phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ __ret; \})
/** * __phy_read - convenience function for reading a given PHY register * @phydev: the phy_device struct * @regnum: register number to read * * The caller must have taken the MDIO bus lock. */static inline int __phy_read(struct phy_device *phydev, u32 regnum){ return __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum);}
/** * phy_write - Convenience function for writing a given PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: value to write to @regnum * * NOTE: MUST NOT be called from interrupt context, * because the bus read/write functions may wait for an interrupt * to conclude the operation. */static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val){ return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val);}
/** * __phy_write - Convenience function for writing a given PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: value to write to @regnum * * The caller must have taken the MDIO bus lock. */static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val){ return __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val);}
/** * __phy_modify_changed() - Convenience function for modifying a PHY register * @phydev: a pointer to a &struct phy_device * @regnum: register number * @mask: bit mask of bits to clear * @set: bit mask of bits to set * * Unlocked helper function which allows a PHY register to be modified as * new register value = (old register value & ~mask) | set * * Returns negative errno, 0 if there was no change, and 1 in case of change */static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set){ return __mdiobus_modify_changed(phydev->mdio.bus, phydev->mdio.addr, regnum, mask, set);}
/* * phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. */int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
/** * phy_read_mmd_poll_timeout - Periodically poll a PHY register until a * condition is met or a timeout occurs * * @phydev: The phy_device struct * @devaddr: The MMD to read from * @regnum: The register on the MMD to read * @val: Variable to read the register into * @cond: Break condition (usually involving @val) * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please * read usleep_range() function description for details and * limitations. * @timeout_us: Timeout in us, 0 means never timeout * @sleep_before_read: if it is true, sleep @sleep_us before read. * * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either * case, the last read value at @args is stored in @val. Must not * be called from atomic context if sleep_us or timeout_us are used. */#define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ sleep_us, timeout_us, sleep_before_read) \({ \ int __ret, __val; \ __ret = read_poll_timeout(__val = phy_read_mmd, val, \ __val < 0 || (cond), \ sleep_us, timeout_us, sleep_before_read, \ phydev, devaddr, regnum); \ if (__val < 0) \ __ret = __val; \ if (__ret) \ phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ __ret; \})
/* * __phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. */int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
/* * phy_write_mmd - Convenience function for writing a register * on an MMD on a given PHY. */int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
/* * __phy_write_mmd - Convenience function for writing a register * on an MMD on a given PHY. */int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set);int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set);int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set);int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set);
/** * __phy_set_bits - Convenience function for setting bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to set * * The caller must have taken the MDIO bus lock. */static inline int __phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val){ return __phy_modify(phydev, regnum, 0, val);}
/** * __phy_clear_bits - Convenience function for clearing bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to clear * * The caller must have taken the MDIO bus lock. */static inline int __phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val){ return __phy_modify(phydev, regnum, val, 0);}
/** * phy_set_bits - Convenience function for setting bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to set */static inline int phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val){ return phy_modify(phydev, regnum, 0, val);}
/** * phy_clear_bits - Convenience function for clearing bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to clear */static inline int phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val){ return phy_modify(phydev, regnum, val, 0);}
/** * __phy_set_bits_mmd - Convenience function for setting bits in a register * on MMD * @phydev: the phy_device struct * @devad: the MMD containing register to modify * @regnum: register number to modify * @val: bits to set * * The caller must have taken the MDIO bus lock. */static inline int __phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val){ return __phy_modify_mmd(phydev, devad, regnum, 0, val);}
/** * __phy_clear_bits_mmd - Convenience function for clearing bits in a register * on MMD * @phydev: the phy_device struct * @devad: the MMD containing register to modify * @regnum: register number to modify * @val: bits to clear * * The caller must have taken the MDIO bus lock. */static inline int __phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val){ return __phy_modify_mmd(phydev, devad, regnum, val, 0);}
/** * phy_set_bits_mmd - Convenience function for setting bits in a register * on MMD * @phydev: the phy_device struct * @devad: the MMD containing register to modify * @regnum: register number to modify * @val: bits to set */static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val){ return phy_modify_mmd(phydev, devad, regnum, 0, val);}
/** * phy_clear_bits_mmd - Convenience function for clearing bits in a register * on MMD * @phydev: the phy_device struct * @devad: the MMD containing register to modify * @regnum: register number to modify * @val: bits to clear */static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val){ return phy_modify_mmd(phydev, devad, regnum, val, 0);}
/** * phy_interrupt_is_valid - Convenience function for testing a given PHY irq * @phydev: the phy_device struct * * NOTE: must be kept in sync with addition/removal of PHY_POLL and * PHY_MAC_INTERRUPT */static inline bool phy_interrupt_is_valid(struct phy_device *phydev){ return phydev->irq != PHY_POLL && phydev->irq != PHY_MAC_INTERRUPT;}
/** * phy_polling_mode - Convenience function for testing whether polling is * used to detect PHY status changes * @phydev: the phy_device struct */static inline bool phy_polling_mode(struct phy_device *phydev){ if (phydev->state == PHY_CABLETEST) if (phydev->drv->flags & PHY_POLL_CABLE_TEST) return true;
if (phydev->drv->update_stats) return true;
return phydev->irq == PHY_POLL;}
/** * phy_has_hwtstamp - Tests whether a PHY time stamp configuration. * @phydev: the phy_device struct */static inline bool phy_has_hwtstamp(struct phy_device *phydev){ return phydev && phydev->mii_ts && phydev->mii_ts->hwtstamp;}
/** * phy_has_rxtstamp - Tests whether a PHY supports receive time stamping. * @phydev: the phy_device struct */static inline bool phy_has_rxtstamp(struct phy_device *phydev){ return phydev && phydev->mii_ts && phydev->mii_ts->rxtstamp;}
/** * phy_has_tsinfo - Tests whether a PHY reports time stamping and/or * PTP hardware clock capabilities. * @phydev: the phy_device struct */static inline bool phy_has_tsinfo(struct phy_device *phydev){ return phydev && phydev->mii_ts && phydev->mii_ts->ts_info;}
/** * phy_has_txtstamp - Tests whether a PHY supports transmit time stamping. * @phydev: the phy_device struct */static inline bool phy_has_txtstamp(struct phy_device *phydev){ return phydev && phydev->mii_ts && phydev->mii_ts->txtstamp;}
static inline int phy_hwtstamp(struct phy_device *phydev, struct kernel_hwtstamp_config *cfg, struct netlink_ext_ack *extack){ return phydev->mii_ts->hwtstamp(phydev->mii_ts, cfg, extack);}
static inline bool phy_rxtstamp(struct phy_device *phydev, struct sk_buff *skb, int type){ return phydev->mii_ts->rxtstamp(phydev->mii_ts, skb, type);}
static inline int phy_ts_info(struct phy_device *phydev, struct kernel_ethtool_ts_info *tsinfo){ return phydev->mii_ts->ts_info(phydev->mii_ts, tsinfo);}
static inline void phy_txtstamp(struct phy_device *phydev, struct sk_buff *skb, int type){ phydev->mii_ts->txtstamp(phydev->mii_ts, skb, type);}
/** * phy_is_default_hwtstamp - Is the PHY hwtstamp the default timestamp * @phydev: Pointer to phy_device * * This is used to get default timestamping device taking into account * the new API choice, which is selecting the timestamping from MAC by * default if the phydev does not have default_timestamp flag enabled. * * Return: True if phy is the default hw timestamp, false otherwise. */static inline bool phy_is_default_hwtstamp(struct phy_device *phydev){ return phy_has_hwtstamp(phydev) && phydev->default_timestamp;}
/** * phy_on_sfp - Convenience function for testing if a PHY is on an SFP module * @phydev: the phy_device struct */static inline bool phy_on_sfp(struct phy_device *phydev){ return phydev->is_on_sfp_module;}
/** * phy_interface_mode_is_rgmii - Convenience function for testing if a * PHY interface mode is RGMII (all variants) * @mode: the &phy_interface_t enum */static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode){ return mode >= PHY_INTERFACE_MODE_RGMII && mode <= PHY_INTERFACE_MODE_RGMII_TXID;};
/** * phy_interface_mode_is_8023z() - does the PHY interface mode use 802.3z * negotiation * @mode: one of &enum phy_interface_t * * Returns true if the PHY interface mode uses the 16-bit negotiation * word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding) */static inline bool phy_interface_mode_is_8023z(phy_interface_t mode){ return mode == PHY_INTERFACE_MODE_1000BASEX || mode == PHY_INTERFACE_MODE_2500BASEX;}
/** * phy_interface_is_rgmii - Convenience function for testing if a PHY interface * is RGMII (all variants) * @phydev: the phy_device struct */static inline bool phy_interface_is_rgmii(struct phy_device *phydev){ return phy_interface_mode_is_rgmii(phydev->interface);};
/** * phy_is_pseudo_fixed_link - Convenience function for testing if this * PHY is the CPU port facing side of an Ethernet switch, or similar. * @phydev: the phy_device struct */static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev){ return phydev->is_pseudo_fixed_link;}
int phy_save_page(struct phy_device *phydev);int phy_select_page(struct phy_device *phydev, int page);int phy_restore_page(struct phy_device *phydev, int oldpage, int ret);int phy_read_paged(struct phy_device *phydev, int page, u32 regnum);int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val);int phy_modify_paged_changed(struct phy_device *phydev, int page, u32 regnum, u16 mask, u16 set);int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, u16 mask, u16 set);
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id, bool is_c45, struct phy_c45_device_ids *c45_ids);int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id);struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);struct fwnode_handle *fwnode_get_phy_node(const struct fwnode_handle *fwnode);struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);int phy_device_register(struct phy_device *phy);void phy_device_free(struct phy_device *phydev);void phy_device_remove(struct phy_device *phydev);int phy_get_c45_ids(struct phy_device *phydev);int phy_init_hw(struct phy_device *phydev);int phy_suspend(struct phy_device *phydev);int phy_resume(struct phy_device *phydev);int __phy_resume(struct phy_device *phydev);int phy_loopback(struct phy_device *phydev, bool enable, int speed);int phy_sfp_connect_phy(void *upstream, struct phy_device *phy);void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy);void phy_sfp_attach(void *upstream, struct sfp_bus *bus);void phy_sfp_detach(void *upstream, struct sfp_bus *bus);int phy_sfp_probe(struct phy_device *phydev, const struct sfp_upstream_ops *ops);struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, phy_interface_t interface);struct phy_device *phy_find_first(struct mii_bus *bus);int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, u32 flags, phy_interface_t interface);int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, void (*handler)(struct net_device *), phy_interface_t interface);struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, void (*handler)(struct net_device *), phy_interface_t interface);void phy_disconnect(struct phy_device *phydev);void phy_detach(struct phy_device *phydev);void phy_start(struct phy_device *phydev);void phy_stop(struct phy_device *phydev);int phy_config_aneg(struct phy_device *phydev);int _phy_start_aneg(struct phy_device *phydev);int phy_start_aneg(struct phy_device *phydev);int phy_aneg_done(struct phy_device *phydev);unsigned int phy_inband_caps(struct phy_device *phydev, phy_interface_t interface);int phy_config_inband(struct phy_device *phydev, unsigned int modes);int phy_speed_down(struct phy_device *phydev, bool sync);int phy_speed_up(struct phy_device *phydev);bool phy_check_valid(int speed, int duplex, unsigned long *features);
int phy_restart_aneg(struct phy_device *phydev);int phy_reset_after_clk_enable(struct phy_device *phydev);
#if IS_ENABLED(CONFIG_PHYLIB)int phy_start_cable_test(struct phy_device *phydev, struct netlink_ext_ack *extack);int phy_start_cable_test_tdr(struct phy_device *phydev, struct netlink_ext_ack *extack, const struct phy_tdr_config *config);#elsestatic inlineint phy_start_cable_test(struct phy_device *phydev, struct netlink_ext_ack *extack){ NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support"); return -EOPNOTSUPP;}static inlineint phy_start_cable_test_tdr(struct phy_device *phydev, struct netlink_ext_ack *extack, const struct phy_tdr_config *config){ NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support"); return -EOPNOTSUPP;}#endif
static inline void phy_device_reset(struct phy_device *phydev, int value){ mdio_device_reset(&phydev->mdio, value);}
#define phydev_err(_phydev, format, args...) \ dev_err(&_phydev->mdio.dev, format, ##args)
#define phydev_err_probe(_phydev, err, format, args...) \ dev_err_probe(&_phydev->mdio.dev, err, format, ##args)
#define phydev_info(_phydev, format, args...) \ dev_info(&_phydev->mdio.dev, format, ##args)
#define phydev_warn(_phydev, format, args...) \ dev_warn(&_phydev->mdio.dev, format, ##args)
#define phydev_dbg(_phydev, format, args...) \ dev_dbg(&_phydev->mdio.dev, format, ##args)
static inline const char *phydev_name(const struct phy_device *phydev){ return dev_name(&phydev->mdio.dev);}
static inline void phy_lock_mdio_bus(struct phy_device *phydev){ mutex_lock(&phydev->mdio.bus->mdio_lock);}
static inline void phy_unlock_mdio_bus(struct phy_device *phydev){ mutex_unlock(&phydev->mdio.bus->mdio_lock);}
void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) __printf(2, 3);char *phy_attached_info_irq(struct phy_device *phydev) __malloc;void phy_attached_info(struct phy_device *phydev);
int genphy_match_phy_device(struct phy_device *phydev, const struct phy_driver *phydrv);
/* Clause 22 PHY */int genphy_read_abilities(struct phy_device *phydev);int genphy_setup_forced(struct phy_device *phydev);int genphy_restart_aneg(struct phy_device *phydev);int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart);int __genphy_config_aneg(struct phy_device *phydev, bool changed);int genphy_aneg_done(struct phy_device *phydev);int genphy_update_link(struct phy_device *phydev);int genphy_read_lpa(struct phy_device *phydev);int genphy_read_status_fixed(struct phy_device *phydev);int genphy_read_status(struct phy_device *phydev);int genphy_read_master_slave(struct phy_device *phydev);int genphy_suspend(struct phy_device *phydev);int genphy_resume(struct phy_device *phydev);int genphy_loopback(struct phy_device *phydev, bool enable, int speed);int genphy_soft_reset(struct phy_device *phydev);irqreturn_t genphy_handle_interrupt_no_ack(struct phy_device *phydev);
static inline int genphy_config_aneg(struct phy_device *phydev){ return __genphy_config_aneg(phydev, false);}
static inline int genphy_no_config_intr(struct phy_device *phydev){ return 0;}int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, u16 regnum);int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, u16 regnum, u16 val);
/* Clause 37 */int genphy_c37_config_aneg(struct phy_device *phydev);int genphy_c37_read_status(struct phy_device *phydev, bool *changed);
/* Clause 45 PHY */int genphy_c45_restart_aneg(struct phy_device *phydev);int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart);int genphy_c45_aneg_done(struct phy_device *phydev);int genphy_c45_read_link(struct phy_device *phydev);int genphy_c45_read_lpa(struct phy_device *phydev);int genphy_c45_read_pma(struct phy_device *phydev);int genphy_c45_pma_setup_forced(struct phy_device *phydev);int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev);int genphy_c45_an_config_aneg(struct phy_device *phydev);int genphy_c45_an_disable_aneg(struct phy_device *phydev);int genphy_c45_read_mdix(struct phy_device *phydev);int genphy_c45_pma_read_abilities(struct phy_device *phydev);int genphy_c45_pma_read_ext_abilities(struct phy_device *phydev);int genphy_c45_pma_baset1_read_abilities(struct phy_device *phydev);int genphy_c45_read_eee_abilities(struct phy_device *phydev);int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev);int genphy_c45_read_status(struct phy_device *phydev);int genphy_c45_baset1_read_status(struct phy_device *phydev);int genphy_c45_config_aneg(struct phy_device *phydev);int genphy_c45_loopback(struct phy_device *phydev, bool enable, int speed);int genphy_c45_pma_resume(struct phy_device *phydev);int genphy_c45_pma_suspend(struct phy_device *phydev);int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable);int genphy_c45_plca_get_cfg(struct phy_device *phydev, struct phy_plca_cfg *plca_cfg);int genphy_c45_plca_set_cfg(struct phy_device *phydev, const struct phy_plca_cfg *plca_cfg);int genphy_c45_plca_get_status(struct phy_device *phydev, struct phy_plca_status *plca_st);int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *lp);int genphy_c45_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data);int genphy_c45_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data);int genphy_c45_an_config_eee_aneg(struct phy_device *phydev);
/* Generic C45 PHY driver */extern struct phy_driver genphy_c45_driver;
/* The gen10g_* functions are the old Clause 45 stub */int gen10g_config_aneg(struct phy_device *phydev);
static inline int phy_read_status(struct phy_device *phydev){ if (!phydev->drv) return -EIO;
if (phydev->drv->read_status) return phydev->drv->read_status(phydev); else return genphy_read_status(phydev);}
void phy_driver_unregister(struct phy_driver *drv);void phy_drivers_unregister(struct phy_driver *drv, int n);int phy_driver_register(struct phy_driver *new_driver, struct module *owner);int phy_drivers_register(struct phy_driver *new_driver, int n, struct module *owner);void phy_error(struct phy_device *phydev);void phy_state_machine(struct work_struct *work);void phy_trigger_machine(struct phy_device *phydev);void phy_mac_interrupt(struct phy_device *phydev);void phy_start_machine(struct phy_device *phydev);void phy_stop_machine(struct phy_device *phydev);void phy_ethtool_ksettings_get(struct phy_device *phydev, struct ethtool_link_ksettings *cmd);int phy_ethtool_ksettings_set(struct phy_device *phydev, const struct ethtool_link_ksettings *cmd);int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd);int phy_disable_interrupts(struct phy_device *phydev);void phy_request_interrupt(struct phy_device *phydev);void phy_free_interrupt(struct phy_device *phydev);void phy_print_status(struct phy_device *phydev);int phy_get_rate_matching(struct phy_device *phydev, phy_interface_t iface);void phy_set_max_speed(struct phy_device *phydev, u32 max_speed);void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode);void phy_advertise_supported(struct phy_device *phydev);void phy_advertise_eee_all(struct phy_device *phydev);void phy_support_sym_pause(struct phy_device *phydev);void phy_support_asym_pause(struct phy_device *phydev);void phy_support_eee(struct phy_device *phydev);void phy_disable_eee(struct phy_device *phydev);void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx, bool autoneg);void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);bool phy_validate_pause(struct phy_device *phydev, struct ethtool_pauseparam *pp);void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause);
s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev, const int *delay_values, int size, bool is_rx);
int phy_get_tx_amplitude_gain(struct phy_device *phydev, struct device *dev, enum ethtool_link_mode_bit_indices linkmode, u32 *val);
int phy_get_mac_termination(struct phy_device *phydev, struct device *dev, u32 *val);
void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv, bool *tx_pause, bool *rx_pause);
int phy_register_fixup_for_id(const char *bus_id, int (*run)(struct phy_device *));int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *));
int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask);int phy_unregister_fixup_for_id(const char *bus_id);int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask);
int phy_eee_tx_clock_stop_capable(struct phy_device *phydev);int phy_eee_rx_clock_stop(struct phy_device *phydev, bool clk_stop_enable);int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);int phy_get_eee_err(struct phy_device *phydev);int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data);int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data);int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);int phy_ethtool_get_link_ksettings(struct net_device *ndev, struct ethtool_link_ksettings *cmd);int phy_ethtool_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd);int phy_ethtool_nway_reset(struct net_device *ndev);
int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data);int phy_ethtool_get_sset_count(struct phy_device *phydev);int phy_ethtool_get_stats(struct phy_device *phydev, struct ethtool_stats *stats, u64 *data);
void __phy_ethtool_get_phy_stats(struct phy_device *phydev, struct ethtool_eth_phy_stats *phy_stats, struct ethtool_phy_stats *phydev_stats);void __phy_ethtool_get_link_ext_stats(struct phy_device *phydev, struct ethtool_link_ext_stats *link_stats);
int phy_ethtool_get_plca_cfg(struct phy_device *phydev, struct phy_plca_cfg *plca_cfg);int phy_ethtool_set_plca_cfg(struct phy_device *phydev, const struct phy_plca_cfg *plca_cfg, struct netlink_ext_ack *extack);int phy_ethtool_get_plca_status(struct phy_device *phydev, struct phy_plca_status *plca_st);
int __phy_hwtstamp_get(struct phy_device *phydev, struct kernel_hwtstamp_config *config);int __phy_hwtstamp_set(struct phy_device *phydev, struct kernel_hwtstamp_config *config, struct netlink_ext_ack *extack);
extern const struct bus_type mdio_bus_type;extern const struct class mdio_bus_class;
struct mdio_board_info { const char *bus_id; char modalias[MDIO_NAME_SIZE]; int mdio_addr; const void *platform_data;};
int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned int n);
/** * phy_module_driver() - Helper macro for registering PHY drivers * @__phy_drivers: array of PHY drivers to register * @__count: Numbers of members in array * * Helper macro for PHY drivers which do not do anything special in module * init/exit. Each module may only use this macro once, and calling it * replaces module_init() and module_exit(). */#define phy_module_driver(__phy_drivers, __count) \static int __init phy_module_init(void) \{ \ return phy_drivers_register(__phy_drivers, __count, THIS_MODULE); \} \module_init(phy_module_init); \static void __exit phy_module_exit(void) \{ \ phy_drivers_unregister(__phy_drivers, __count); \} \module_exit(phy_module_exit)
#define module_phy_driver(__phy_drivers) \ phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers))
bool phy_driver_is_genphy(struct phy_device *phydev);bool phy_driver_is_genphy_10g(struct phy_device *phydev);
#endif /* __PHY_H */