tjh.dev
commits
Pull timer fix from Borislav Petkov:
- Make sure a warning is issued when a hrtimer gets queued after the
timers have been migrated on the CPU down path and thus said timer
will get ignored
* tag 'timers_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Report offline hrtimer enqueue
Pull x86 fixes from Borislav Petkov:
- Correct the minimum CPU family for Transmeta Crusoe in Kconfig so
that such hw can boot again
- Do not take into accout XSTATE buffer size info supplied by userspace
when constructing a sigreturn frame
- Switch get_/put_user* to EX_TYPE_UACCESS exception handling when an
MCE is encountered so that it can be properly recovered from instead
of simply panicking
* tag 'x86_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6
x86/fpu: Stop relying on userspace for info to fault in xsave buffer
x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
The hrtimers migration on CPU-down hotplug process has been moved
earlier, before the CPU actually goes to die. This leaves a small window
of opportunity to queue an hrtimer in a blind spot, leaving it ignored.
For example a practical case has been reported with RCU waking up a
SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that
way a sched/rt timer to the local offline CPU.
Make sure such situations never go unnoticed and warn when that happens.
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com
Pull misc fixes from Andrew Morton:
"21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
nilfs2: fix potential bug in end_buffer_async_write
mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
MAINTAINERS: Leo Yan has moved
mm/zswap: don't return LRU_SKIP if we have dropped lru lock
fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super
mailmap: switch email address for John Moon
mm: zswap: fix objcg use-after-free in entry destruction
mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range()
arch/arm/mm: fix major fault accounting when retrying under per-VMA lock
selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros
mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page
mm: memcg: optimize parent iteration in memcg_rstat_updated()
nilfs2: fix data corruption in dsync block recovery for small block sizes
mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get()
exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock)
fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats
fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand()
getrusage: use sig->stats_lock rather than lock_task_sighand()
getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()
...
The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows
the following error message:
This kernel requires an i686 CPU, but only detected an i586 CPU.
Unable to boot - please use a kernel appropriate for your CPU.
Remove MCRUSOE from the condition introduced in commit in Fixes, effectively
changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the
CPU family given by CPUID.
[ bp: Massage commit message. ]
Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig")
Signed-off-by: Aleksander Mazur <deweloper@wp.pl>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240123134309.1117782-1-deweloper@wp.pl
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)
- Fix for a queue freezing issue in virtblk (Yi)
- blk-iocost underflow fix (Tejun)
- blk-wbt task detection fix (Jan)
* tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linux:
virtio-blk: Ensure no requests in virtqueues before deleting vqs.
blk-iocost: Fix an UBSAN shift-out-of-bounds warning
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
blk-wbt: Fix detection of dirty-throttled tasks
nvme-host: fix the updating of the firmware version
According to a syzbot report, end_buffer_async_write(), which handles the
completion of block device writes, may detect abnormal condition of the
buffer async_write flag and cause a BUG_ON failure when using nilfs2.
Nilfs2 itself does not use end_buffer_async_write(). But, the async_write
flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue
with race condition of competition between segments for dirty blocks") as
a means of resolving double list insertion of dirty blocks in
nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the
resulting crash.
This modification is safe as long as it is used for file data and b-tree
node blocks where the page caches are independent. However, it was
irrelevant and redundant to also introduce async_write for segment summary
and super root blocks that share buffers with the backing device. This
led to the possibility that the BUG_ON check in end_buffer_async_write
would fail as described above, if independent writebacks of the backing
device occurred in parallel.
The use of async_write for segment summary buffers has already been
removed in a previous change.
Fix this issue by removing the manipulation of the async_write flag for
the remaining super root block buffer.
Link: https://lkml.kernel.org/r/20240203161645.4992-1-konishi.ryusuke@gmail.com
Fixes: 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+5c04210f7c7f897c1e7f@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000019a97c05fd42f8c8@google.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Before this change, the expected size of the user space buffer was
taken from fx_sw->xstate_size. fx_sw->xstate_size can be changed
from user-space, so it is possible construct a sigreturn frame where:
* fx_sw->xstate_size is smaller than the size required by valid bits in
fx_sw->xfeatures.
* user-space unmaps parts of the sigrame fpu buffer so that not all of
the buffer required by xrstor is accessible.
In this case, xrstor tries to restore and accesses the unmapped area
which results in a fault. But fault_in_readable succeeds because buf +
fx_sw->xstate_size is within the still mapped area, so it goes back and
tries xrstor again. It will spin in this loop forever.
Instead, fault in the maximum size which can be touched by XRSTOR (taken
from fpstate->user_size).
[ dhansen: tweak subject / changelog ]
Fixes: fcb3635f5018 ("x86/fpu/signal: Handle #PF in the direct restore path")
Reported-by: Konstantin Bogomolov <bogomolov@google.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240130063603.3392627-1-avagin%40google.com
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
and extent handling code"
* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
ext4: make ext4_map_blocks() distinguish delalloc only extent
ext4: add a hole extent entry in cache after punch
ext4: correct the hole length returned by ext4_map_blocks()
ext4: convert to exclusive lock while inserting delalloc extents
ext4: refactor ext4_da_map_blocks()
ext4: remove 'needed' in trace_ext4_discard_preallocations
ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
ext4: remove unused return value of ext4_mb_release_group_pa
ext4: remove unused return value of ext4_mb_release_inode_pa
ext4: remove unused return value of ext4_mb_release
ext4: remove unused ext4_allocation_context::ac_groups_considered
ext4: remove unneeded return value of ext4_mb_release_context
ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
ext4: remove unused return value of __mb_check_buddy
ext4: mark the group block bitmap as corrupted before reporting an error
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
...
Pull firewire fix from Takashi Sakamoto:
"A change to accelerate the device detection step in some cases.
In the self-identification step after bus-reset, all nodes in the same
bus broadcast selfID packet including the value of gap count. The
value is related to the cable hops between nodes, and used to
calculate the subaction gap and the arbitration reset gap.
When each node has the different value of the gap count, the
asynchronous communication between them is unreliable, since an
asynchronous transaction could be interrupted by another asynchronous
transaction before completion. The gap count inconsistency can be
resolved by several ways; e.g. the transfer of PHY configuration
packet and generation of bus-reset.
The current implementation of firewire stack can correctly detect the
gap count inconsistency, however the recovery action from the
inconsistency tends to be delayed after reading configuration ROM of
root node. This results in the long time to probe devices in some
combinations of hardware.
Here the stack is changed to schedule the action as soon as possible"
* tag 'firewire-fixes-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: send bus reset promptly on gap count error
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.8
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)"
* tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme:
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
nvme-host: fix the updating of the firmware version
DAMON sysfs interface's update_schemes_tried_regions command has a timeout
of two apply intervals of the DAMOS scheme. Having zero value DAMOS
scheme apply interval means it will use the aggregation interval as the
value. However, the timeout setup logic is mistakenly using the sampling
interval insted of the aggregartion interval for the case. This could
cause earlier-than-expected timeout of the command. Fix it.
Link: https://lkml.kernel.org/r/20240202191956.88791-1-sj@kernel.org
Fixes: 7d6fa31a2fd7 ("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc27561f ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ]
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com
Pull smb client fixes from Steve French:
"Five smb3 client fixes, mostly multichannel related:
- four multichannel fixes including fix for channel allocation when
multiple inactive channels, fix for unneeded race in channel
deallocation, correct redundant channel scaling, and redundant
multichannel disabling scenarios
- add warning if max compound requests reached"
* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: increase number of PDUs allowed in a compound request
cifs: failure to add channel on iface should bump up weight
cifs: do not search for channel if server is terminating
cifs: avoid redundant calls to disable multichannel
cifs: make sure that channel scaling is done only once
Since ext4_map_blocks() can recognize a delayed allocated only extent,
make ext4_set_iomap() can also recognize it, and remove the useless
separate check in ext4_iomap_begin_report().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull smb server fixes from Steve French:
"Two ksmbd server fixes:
- memory leak fix
- a minor kernel-doc fix"
* tag '6.8-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: free aux buffer if ksmbd_iov_pin_rsp_read fails
ksmbd: Add kernel-doc for ksmbd_extract_sharename() function
If we are bus manager and the bus has inconsistent gap counts, send a
bus reset immediately instead of trying to read the root node's config
ROM first. Otherwise, we could spend a lot of time trying to read the
config ROM but never succeeding.
This eliminates a 50+ second delay before the FireWire bus is usable after
a newly connected device is powered on in certain circumstances.
The delay occurs if a gap count inconsistency occurs, we are not the root
node, and we become bus manager. One scenario that causes this is with a TI
XIO2213B OHCI, the first time a Sony DSR-25 is powered on after being
connected to the FireWire cable. In this configuration, the Linux box will
not receive the initial PHY configuration packet sent by the DSR-25 as IRM,
resulting in the DSR-25 having a gap count of 44 while the Linux box has a
gap count of 63.
FireWire devices have a gap count parameter, which is set to 63 on power-up
and can be changed with a PHY configuration packet. This determines the
duration of the subaction and arbitration gaps. For reliable communication,
all nodes on a FireWire bus must have the same gap count.
A node may have zero or more of the following roles: root node, bus manager
(BM), isochronous resource manager (IRM), and cycle master. Unless a root
node was forced with a PHY configuration packet, any node might become root
node after a bus reset. Only the root node can become cycle master. If the
root node is not cycle master capable, the BM or IRM should force a change
of root node.
After a bus reset, each node sends a self-ID packet, which contains its
current gap count. A single bus reset does not change the gap count, but
two bus resets in a row will set the gap count to 63. Because a consistent
gap count is required for reliable communication, IEEE 1394a-2000 requires
that the bus manager generate a bus reset if it detects that the gap count
is inconsistent.
When the gap count is inconsistent, build_tree() will notice this after the
self identification process. It will set card->gap_count to the invalid
value 0. If we become bus master, this will force bm_work() to send a bus
reset when it performs gap count optimization.
After a bus reset, there is no bus manager. We will almost always try to
become bus manager. Once we become bus manager, we will first determine
whether the root node is cycle master capable. Then, we will determine if
the gap count should be changed. If either the root node or the gap count
should be changed, we will generate a bus reset.
To determine if the root node is cycle master capable, we read its
configuration ROM. bm_work() will wait until we have finished trying to
read the configuration ROM.
However, an inconsistent gap count can make this take a long time.
read_config_rom() will read the first few quadlets from the config ROM. Due
to the gap count inconsistency, eventually one of the reads will time out.
When read_config_rom() fails, fw_device_init() calls it again until
MAX_RETRIES is reached. This takes 50+ seconds.
Once we give up trying to read the configuration ROM, bm_work() will wake
up, assume that the root node is not cycle master capable, and do a bus
reset. Hopefully, this will resolve the gap count inconsistency.
This change makes bm_work() check for an inconsistent gap count before
waiting for the root node's configuration ROM. If the gap count is
inconsistent, bm_work() will immediately do a bus reset. This eliminates
the 50+ second delay and rapidly brings the bus to a working state.
I considered that if the gap count is inconsistent, a PHY configuration
packet might not be successful, so it could be desirable to skip the PHY
configuration packet before the bus reset in this case. However, IEEE
1394a-2000 and IEEE 1394-2008 say that the bus manager may transmit a PHY
configuration packet before a bus reset when correcting a gap count error.
Since the standard endorses this, I decided it's safe to retain the PHY
configuration packet transmission.
Normally, after a topology change, we will reset the bus a maximum of 5
times to change the root node and perform gap count optimization. However,
if there is a gap count inconsistency, we must always generate a bus reset.
Otherwise the gap count inconsistency will persist and communication will
be unreliable. For that reason, if there is a gap count inconstency, we
generate a bus reset even if we already reached the 5 reset limit.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Reference: https://sourceforge.net/p/linux1394/mailman/message/58727806/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Ensure no remaining requests in virtqueues before resetting vdev and
deleting virtqueues. Otherwise these requests will never be completed.
It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become
in_flight status, but it cannot guarantee that requests have been
processed by the device. Virtqueues should never be deleted before
all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues
become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently kernel supports 8 byte and 16 byte protection information.
So, use ns->head->pi_size instead of sizeof(struct t10_pi_tuple).
Signed-off-by: Francis Pravin <francis.p@samsung.com>
Signed-off-by: Sathyavathi M <sathya.m@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Syzbot reported a hang issue in migrate_pages_batch() called by mbind()
and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2.
While migrate_pages_batch() locks a folio and waits for the writeback to
complete, the log writer thread that should bring the writeback to
completion picks up the folio being written back in
nilfs_lookup_dirty_data_buffers() that it calls for subsequent log
creation and was trying to lock the folio. Thus causing a deadlock.
In the first place, it is unexpected that folios/pages in the middle of
writeback will be updated and become dirty. Nilfs2 adds a checksum to
verify the validity of the log being written and uses it for recovery at
mount, so data changes during writeback are suppressed. Since this is
broken, an unclean shutdown could potentially cause recovery to fail.
Investigation revealed that the root cause is that the wait for writeback
completion in nilfs_page_mkwrite() is conditional, and if the backing
device does not require stable writes, data may be modified without
waiting.
Fix these issues by making nilfs_page_mkwrite() wait for writeback to
finish regardless of the stable write requirement of the backing device.
Link: https://lkml.kernel.org/r/20240131145657.4209-1-konishi.ryusuke@gmail.com
Fixes: 1d1d1a767206 ("mm: only enforce stable page writes if the backing device requires it")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ee2ae68da3b22d04cd8d@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000047d819061004ad6c@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull xfs fixes from Chandan Babu:
- Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
attribute fork
- Remove conditional compilation of realtime geometry validator
functions to prevent confusing error messages from being printed on
the console during the mount operation
* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove conditional building of rt geometry validator functions
xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
With the introduction of SMB2_OP_QUERY_WSL_EA, the client may now send
5 commands in a single compound request in order to query xattrs from
potential WSL reparse points, which should be fine as we currently
allow up to 5 PDUs in a single compound request. However, if
encryption is enabled (e.g. 'seal' mount option) or enforced by the
server, current MAX_COMPOUND(5) won't be enough as we require an extra
PDU for the transform header.
Fix this by increasing MAX_COMPOUND to 7 and, while we're at it, add
an WARN_ON_ONCE() and return -EIO instead of -ENOMEM in case we
attempt to send a compound request that couldn't include the extra
transform header.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a new map flag EXT4_MAP_DELAYED to indicate the mapping range is a
delayed allocated only (not unwritten) one, and making
ext4_map_blocks() can distinguish it, no longer mixing it with holes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull SCSI fixes from James Bottomley:
"Three small driver fixes and one core fix.
The core fix being a fixup to the one in the last pull request which
didn't entirely move checking of scsi_host_busy() out from under the
host lock"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare()
scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()
scsi: lpfc: Use unsigned type for num_sge
scsi: core: Move scsi_host_busy() out of host lock if it is for per-command
ksmbd_iov_pin_rsp_read() doesn't free the provided aux buffer if it
fails. Seems to be the caller's responsibility to clear the buffer in
error case.
Found by Linux Verification Center (linuxtesting.org).
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
Reported-by: Breno Leitão <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5160a5a53c0c ("blk-iocost: implement delay adjustment hysteresis")
Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The functions and the attribute listed in the comment doesn't exists in
the code, (ns->logging_enabled, nvme_passthru_err_log_enabled_store()
and nvme_passthru_err_log_enabled_show())
Update the comment with right function names and a comment
ns->head->passthru_err_log_enabled,
nvme_io_passthru_err_log_enabled_store() and
nvme_io_passthru_err_log_enabled_show().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
I will lose access to my @linaro.org email address next week, update the
MAINTAINERS file and map it in .mailmap with the new email address.
Link: https://lkml.kernel.org/r/20240201021022.886-1-leo.yan@linux.dev
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.8-rc3. They include:
- Android binder long-term bug with epoll finally being fixed
- fastrpc driver shutdown bugfix
- open-dice lockdep fix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: signal epoll threads of self-work
misc: open-dice: Fix spurious lockdep warning
misc: fastrpc: Mark all sessions as invalid in cb_remove
I mistakenly turned off CONFIG_XFS_RT in the Kconfig file for arm64
variant of the djwong-wtf git branch. Unfortunately, it took me a good
hour to figure out that RT wasn't built because this is what got printed
to dmesg:
XFS (sda2): realtime geometry sanity check failed
XFS (sda2): Metadata corruption detected at xfs_sb_read_verify+0x170/0x190 [xfs], xfs_sb block 0x0
Whereas I would have expected:
XFS (sda2): Not built with CONFIG_XFS_RT
XFS (sda2): RT mount failed
The root cause of these problems is the conditional compilation of the
new functions xfs_validate_rtextents and xfs_compute_rextslog that I
introduced in the two commits listed below. The !RT versions of these
functions return false and 0, respectively, which causes primary
superblock validation to fail, which explains the first message.
Move the two functions to other parts of libxfs that are not
conditionally defined by CONFIG_XFS_RT and remove the broken stubs so
that validation works again.
Fixes: e14293803f4e ("xfs: don't allow overly small or large realtime volumes")
Fixes: a6a38f309afc ("xfs: make rextslog computation consistent with mkfs")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
After the interface selection policy change to do a weighted
round robin, each iface maintains a weight_fulfilled. When the
weight_fulfilled reaches the total weight for the iface, we know
that the weights can be reset and ifaces can be allocated from
scratch again.
During channel allocation failures on a particular channel,
weight_fulfilled is not incremented. If a few interfaces are
inactive, we could end up in a situation where the active
interfaces are all allocated for the total_weight, and inactive
ones are all that remain. This can cause a situation where
no more channels can be allocated further.
This change fixes it by increasing weight_fulfilled, even when
channel allocation failure happens. This could mean that if
there are temporary failures in channel allocation, the iface
weights may not strictly be adhered to. But that's still okay.
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to cache hole extents in the extent status tree and keep the
hole length as long as possible, re-add a hole entry to the cache just
after punching a hole.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull smb client fixes from Steve French:
- reconnect fix
- multichannel channel selection fix
- minor mount warning fix
- reparse point fix
- null pointer check improvement
* tag '6.8-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: clarify mount warning
cifs: handle cases where multiple sessions share connection
cifs: change tcon status when need_reconnect is set on it
smb: client: set correct d_type for reparse points under DFS mounts
smb3: add missing null server pointer check
If ufshcd_err_handler() is called in a suspend/resume situation,
ufs_release() can be called twice and active_reqs end up going negative.
This is because ufshcd_err_handling_prepare() and
ufshcd_err_handling_unprepare() both call ufshcd_release().
Remove superfluous call to ufshcd_release().
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240122083324.11797-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ksmbd_extract_sharename() function lacked a complete kernel-doc
comment. This patch adds parameter descriptions and detailed function
behavior to improve code readability and maintainability.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The detection of dirty-throttled tasks in blk-wbt has been subtly broken
since its beginning in 2016. Namely if we are doing cgroup writeback and
the throttled task is not in the root cgroup, balance_dirty_pages() will
set dirty_sleep for the non-root bdi_writeback structure. However
blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback
structure. Thus detection of recently throttled tasks is not working in
this case (we noticed this when we switched to cgroup v2 and suddently
writeback was slow).
Since blk-wbt has no easy way to get to proper bdi_writeback and
furthermore its intention has always been to work on the whole device
rather than on individual cgroups, just move the dirty_sleep timestamp
from bdi_writeback to backing_dev_info. That fixes the checking for
recently throttled task and saves memory for everybody as a bonus.
CC: stable@vger.kernel.org
Fixes: b57d74aff9ab ("writeback: track if we're sleeping on progress in balance_dirty_pages()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz
[axboe: fixup indentation errors]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The namespace does not have attributes, but the head does. Move the new
logging attribute to that structure instead of dereferencing the wrong
type.
And while we're here, fix the reverse-tree coding style.
Fixes: 9f079dda14339e ("nvme: allow passthru cmd error logging")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Tested-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
LRU_SKIP can only be returned if we don't ever dropped lru lock, or we
need to return LRU_RETRY to restart from the head of lru list.
Otherwise, the iteration might continue from a cursor position that was
freed while the locks were dropped.
Actually we may need to introduce another LRU_STOP to really terminate the
ongoing shrinking scan process, when we encounter a warm page already in
the swap cache. The current list_lru implementation doesn't have this
function to early break from __list_lru_walk_one.
Link: https://lkml.kernel.org/r/20240126-zswap-writeback-race-v2-1-b10479847099@bytedance.com
Fixes: b5ba474f3f51 ("zswap: shrink zswap pool based on memory pressure")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chris Li <chriscli@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull MIPS fixes from Thomas Bogendoerfer:
- fix boot issue on single core Lantiq Danube devices
- fix boot issue on Loongson64 platforms
- fix improper FPU setup
- fix missing prototypes issues
* tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
MIPS: loongson64: set nid for reserved memblock region
Revert "MIPS: loongson64: set nid for reserved memblock region"
MIPS: lantiq: register smp_ops on non-smp platforms
MIPS: loongson64: set nid for reserved memblock region
MIPS: reserve exception vector space ONLY ONCE
MIPS: BCM63XX: Fix missing prototypes
MIPS: sgi-ip32: Fix missing prototypes
MIPS: sgi-ip30: Fix missing prototypes
MIPS: fw arc: Fix missing prototypes
MIPS: sgi-ip27: Fix missing prototypes
MIPS: Alchemy: Fix missing prototypes
MIPS: Cobalt: Fix missing prototypes
Creating a region with 16 memory devices caused a problem. The div_u64_rem
function, used for dividing an unsigned 64-bit number by a 32-bit one,
faced an issue when SZ_256M * p->interleave_ways. The result surpassed
the maximum limit of the 32-bit divisor (4G), leading to an overflow
and a remainder of 0.
note: At this point, p->interleave_ways is 16, meaning 16 * 256M = 4G
To fix this issue, I replaced the div_u64_rem function with div64_u64_rem
and adjusted the type of the remainder.
Signed-off-by: Quanquan Cao <caoqq@fujitsu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 23a22cd1c98b ("cxl/region: Allocate HPA capacity to regions")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
resolve a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: max310x: prevent infinite while() loop in port startup
serial: max310x: fail probe if clock crystal is unstable
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
serial: core: Fix atomicity violation in uart_tiocmget
serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
tty: serial: Fix bit order in RS485 flag definitions
In (e)poll mode, threads often depend on I/O events to determine when
data is ready for consumption. Within binder, a thread may initiate a
command via BINDER_WRITE_READ without a read buffer and then make use
of epoll_wait() or similar to consume any responses afterwards.
It is then crucial that epoll threads are signaled via wakeup when they
queue their own work. Otherwise, they risk waiting indefinitely for an
event leaving their work unhandled. What is worse, subsequent commands
won't trigger a wakeup either as the thread has pending work.
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Steven Moreland <smoreland@google.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In XFS_DAS_NODE_REMOVE_ATTR case, xfs_attr_mode_remove_attr() sets
filter to XFS_ATTR_INCOMPLETE. The filter is then reset in
xfs_attr_complete_op() if XFS_DA_OP_REPLACE operation is performed.
The filter is not reset though if XFS just removes the attribute
(args->value == NULL) with xfs_attr_defer_remove(). attr code goes
to XFS_DAS_DONE state.
Fix this by always resetting XFS_ATTR_INCOMPLETE filter. The replace
operation already resets this filter in anyway and others are
completed at this step hence don't need it.
Fixes: fdaf1bb3cafc ("xfs: ATTR_REPLACE algorithm with LARP enabled needs rework")
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In order to scale down the channels, the following sequence
of operations happen:
1. server struct is marked for terminate
2. the channel is deallocated in the ses->chans array
3. at a later point the cifsd thread actually terminates the server
Between 2 and 3, there can be calls to find the channel for
a server struct. When that happens, there can be an ugly warning
that's logged. But this is expected.
So this change does two things:
1. in cifs_ses_get_chan_index, if server->terminate is set, return
2. always make sure server->terminate is set with chan_lock held
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In ext4_map_blocks(), if we can't find a range of mapping in the
extents cache, we are calling ext4_ext_map_blocks() to search the real
path and ext4_ext_determine_hole() to determine the hole range. But if
the querying range was partially or completely overlaped by a delalloc
extent, we can't find it in the real extent path, so the returned hole
length could be incorrect.
Fortunately, ext4_ext_put_gap_in_cache() have already handle delalloc
extent, but it searches start from the expanded hole_start, doesn't
start from the querying range, so the delalloc extent found could not be
the one that overlaped the querying range, plus, it also didn't adjust
the hole length. Let's just remove ext4_ext_put_gap_in_cache(), handle
delalloc and insert adjusted hole extent in ext4_ext_determine_hole().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull ceph fixes from Ilya Dryomov:
"Some fscrypt-related fixups (sparse reads are used only for encrypted
files) and two cap handling fixes from Xiubo and Rishabh"
* tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-client:
ceph: always check dir caps asynchronously
ceph: prevent use-after-free in encode_cap_msg()
ceph: always set initial i_blkbits to CEPH_FSCRYPT_BLOCK_SHIFT
libceph: just wait for more data to be available on the socket
libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*()
libceph: fail sparse-read if the data length doesn't match
When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When task_tag >= 32 (in MCQ mode) and sizeof(unsigned int) == 4, 1U <<
task_tag will out of bounds for a u32 mask. Fix this up to prevent
SHIFT_ISSUE (bitwise shifts that are out of bounds for their data type).
[name:debug_monitors&]Unexpected kernel BRK exception at EL1
[name:traps&]Internal error: BRK handler: 00000000f2005514 [#1] PREEMPT SMP
[name:mediatek_cpufreq_hw&]cpufreq stop DVFS log done
[name:mrdump&]Kernel Offset: 0x1ba5800000 from 0xffffffc008000000
[name:mrdump&]PHYS_OFFSET: 0x80000000
[name:mrdump&]pstate: 22400005 (nzCv daif +PAN -UAO)
[name:mrdump&]pc : [0xffffffdbaf52bb2c] ufshcd_clear_cmd+0x280/0x288
[name:mrdump&]lr : [0xffffffdbaf52a774] ufshcd_wait_for_dev_cmd+0x3e4/0x82c
[name:mrdump&]sp : ffffffc0081471b0
<snip>
Workqueue: ufs_eh_wq_0 ufshcd_err_handler
Call trace:
dump_backtrace+0xf8/0x144
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x9c
dump_stack+0x18/0x44
mrdump_common_die+0x254/0x480 [mrdump]
ipanic_die+0x20/0x30 [mrdump]
notify_die+0x15c/0x204
die+0x10c/0x5f8
arm64_notify_die+0x74/0x13c
do_debug_exception+0x164/0x26c
el1_dbg+0x64/0x80
el1h_64_sync_handler+0x3c/0x90
el1h_64_sync+0x68/0x6c
ufshcd_clear_cmd+0x280/0x288
ufshcd_wait_for_dev_cmd+0x3e4/0x82c
ufshcd_exec_dev_cmd+0x5bc/0x9ac
ufshcd_verify_dev_init+0x84/0x1c8
ufshcd_probe_hba+0x724/0x1ce0
ufshcd_host_reset_and_restore+0x260/0x574
ufshcd_reset_and_restore+0x138/0xbd0
ufshcd_err_handler+0x1218/0x2f28
process_one_work+0x5fc/0x1140
worker_thread+0x7d8/0xe20
kthread+0x25c/0x468
ret_from_fork+0x10/0x20
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Link: https://lore.kernel.org/r/20240205104905.24929-1-alice.chao@mediatek.com
Reviewed-by: Stanley Jhu <chu.stanley@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 82b74cac2849 ("blk-ioprio: Convert from rqos policy to direct
call") pushed setting bio I/O priority down into blk_mq_submit_bio()
-- which is too low within block core's submit_bio() because it
skips setting I/O priority for block drivers that implement
fops->submit_bio() (e.g. DM, MD, etc).
Fix this by moving bio_set_ioprio() up from blk-mq.c to blk-core.c and
call it from submit_bio(). This ensures all block drivers call
bio_set_ioprio() during initial bio submission.
Fixes: a78418e6a04c ("block: Always initialize bio IO priority on submit")
Co-developed-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
[snitzer: revised commit header]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240130202638.62600-2-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The original code didn't update the firmware version if the
"next slot" of the AFI register isn't zero or if the
"current slot" field is zero; in those cases it assumed
that a reset was needed.
However, the NVMe specification doesn't exclude the possibility that
the "next slot" value is equal to the "current slot" value,
meaning that the same firmware slot will be activated after performing
a controller level reset; in this case a reset is clearly not
necessary and we can safely update the firmware version.
Modify the code so the kernel will report that a Controller Level Reset
is needed only in the following cases:
1) If the "current slot" field is zero. This is invalid and means that
something is wrong, a reset is needed.
or
2) if the "next slot" field isn't zero AND it's not equal to the
"current slot" value. This means that at the next reset a different
firmware slot will be activated.
Fixes: 983a338b96c8 ("nvme: update firmware version after commit")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When configuring a hugetlb filesystem via the fsconfig() syscall, there is
a possible NULL dereference in hugetlbfs_fill_super() caused by assigning
NULL to ctx->hstate in hugetlbfs_parse_param() when the requested pagesize
is non valid.
E.g: Taking the following steps:
fd = fsopen("hugetlbfs", FSOPEN_CLOEXEC);
fsconfig(fd, FSCONFIG_SET_STRING, "pagesize", "1024", 0);
fsconfig(fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0);
Given that the requested "pagesize" is invalid, ctxt->hstate will be replaced
with NULL, losing its previous value, and we will print an error:
...
...
case Opt_pagesize:
ps = memparse(param->string, &rest);
ctx->hstate = h;
if (!ctx->hstate) {
pr_err("Unsupported page size %lu MB\n", ps / SZ_1M);
return -EINVAL;
}
return 0;
...
...
This is a problem because later on, we will dereference ctxt->hstate in
hugetlbfs_fill_super()
...
...
sb->s_blocksize = huge_page_size(ctx->hstate);
...
...
Causing below Oops.
Fix this by replacing cxt->hstate value only when then pagesize is known
to be valid.
kernel: hugetlbfs: Unsupported page size 0 MB
kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028
kernel: #PF: supervisor read access in kernel mode
kernel: #PF: error_code(0x0000) - not-present page
kernel: PGD 800000010f66c067 P4D 800000010f66c067 PUD 1b22f8067 PMD 0
kernel: Oops: 0000 [#1] PREEMPT SMP PTI
kernel: CPU: 4 PID: 5659 Comm: syscall Tainted: G E 6.8.0-rc2-default+ #22 5a47c3fef76212addcc6eb71344aabc35190ae8f
kernel: Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017
kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0
kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28
kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004
kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000
kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004
kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000
kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400
kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0
kernel: Call Trace:
kernel: <TASK>
kernel: ? __die_body+0x1a/0x60
kernel: ? page_fault_oops+0x16f/0x4a0
kernel: ? search_bpf_extables+0x65/0x70
kernel: ? fixup_exception+0x22/0x310
kernel: ? exc_page_fault+0x69/0x150
kernel: ? asm_exc_page_fault+0x22/0x30
kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10
kernel: ? hugetlbfs_fill_super+0xb4/0x1a0
kernel: ? hugetlbfs_fill_super+0x28/0x1a0
kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10
kernel: vfs_get_super+0x40/0xa0
kernel: ? __pfx_bpf_lsm_capable+0x10/0x10
kernel: vfs_get_tree+0x25/0xd0
kernel: vfs_cmd_create+0x64/0xe0
kernel: __x64_sys_fsconfig+0x395/0x410
kernel: do_syscall_64+0x80/0x160
kernel: ? syscall_exit_to_user_mode+0x82/0x240
kernel: ? do_syscall_64+0x8d/0x160
kernel: ? syscall_exit_to_user_mode+0x82/0x240
kernel: ? do_syscall_64+0x8d/0x160
kernel: ? exc_page_fault+0x69/0x150
kernel: entry_SYSCALL_64_after_hwframe+0x6e/0x76
kernel: RIP: 0033:0x7ffbc0cb87c9
kernel: Code: 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 96 0d 00 f7 d8 64 89 01 48
kernel: RSP: 002b:00007ffc29d2f388 EFLAGS: 00000206 ORIG_RAX: 00000000000001af
kernel: RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffbc0cb87c9
kernel: RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003
kernel: RBP: 00007ffc29d2f3b0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
kernel: R13: 00007ffc29d2f4c0 R14: 0000000000000000 R15: 0000000000000000
kernel: </TASK>
kernel: Modules linked in: rpcsec_gss_krb5(E) auth_rpcgss(E) nfsv4(E) dns_resolver(E) nfs(E) lockd(E) grace(E) sunrpc(E) netfs(E) af_packet(E) bridge(E) stp(E) llc(E) iscsi_ibft(E) iscsi_boot_sysfs(E) intel_rapl_msr(E) intel_rapl_common(E) iTCO_wdt(E) intel_pmc_bxt(E) sb_edac(E) iTCO_vendor_support(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) rfkill(E) ipmi_ssif(E) kvm(E) acpi_ipmi(E) irqbypass(E) pcspkr(E) igb(E) ipmi_si(E) mei_me(E) i2c_i801(E) joydev(E) intel_pch_thermal(E) i2c_smbus(E) dca(E) lpc_ich(E) mei(E) ipmi_devintf(E) ipmi_msghandler(E) acpi_pad(E) tiny_power_button(E) button(E) fuse(E) efi_pstore(E) configfs(E) ip_tables(E) x_tables(E) ext4(E) mbcache(E) jbd2(E) hid_generic(E) usbhid(E) sd_mod(E) t10_pi(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) polyval_clmulni(E) ahci(E) xhci_pci(E) polyval_generic(E) gf128mul(E) ghash_clmulni_intel(E) sha512_ssse3(E) sha256_ssse3(E) xhci_pci_renesas(E) libahci(E) ehci_pci(E) sha1_ssse3(E) xhci_hcd(E) ehci_hcd(E) libata(E)
kernel: mgag200(E) i2c_algo_bit(E) usbcore(E) wmi(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) scsi_common(E) aesni_intel(E) crypto_simd(E) cryptd(E)
kernel: Unloaded tainted modules: acpi_cpufreq(E):1 fjes(E):1
kernel: CR2: 0000000000000028
kernel: ---[ end trace 0000000000000000 ]---
kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0
kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28
kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004
kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000
kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004
kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000
kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400
kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0
Link: https://lkml.kernel.org/r/20240130210418.3771-1-osalvador@suse.de
Fixes: 32021982a324 ("hugetlbfs: Convert to fs_context")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull locking fix from Borislav Petkov:
- Prevent an inconsistent futex operation leading to stale state
exposure
* tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent the reuse of stale pi_state
If we still own the FPU after initializing fcr31, when we are preempted
the dirty value in the FPU will be read out and stored into fcr31,
clobbering our setting. This can cause an improper floating-point
environment after execve(). For example:
zsh% cat measure.c
#include <fenv.h>
int main() { return fetestexcept(FE_INEXACT); }
zsh% cc measure.c -o measure -lm
zsh% echo $((1.0/3)) # raising FE_INEXACT
0.33333333333333331
zsh% while ./measure; do ; done
(stopped in seconds)
Call lose_fpu(0) before setting fcr31 to prevent this.
Closes: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/
Fixes: 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CXL 3.1 Section 3.1.1 states:
"A Function on a CXL device must not generate INTx messages if
that Function participates in CXL.cache protocol or CXL.mem
protocols."
The generic CXL memory driver only supports devices which use the
CXL.mem protocol. The current driver attempts to allocate MSI/MSI-X
vectors in anticipation of their need for mailbox interrupts or event
processing. However, the above requirement does not require a device to
support interrupts, only that they use MSI/MSI-X. For example, a device
may disable mailbox interrupts and either be configured for firmware
first or skip event processing and function.
Dave Larsen reported that the following Intel / Agilex card does not
support interrupts on function 0.
CXL: Intel Corporation Device 0ddb (rev 01) (prog-if 10 [CXL Memory Device (CXL 2.x)])
Rather than fail device probe if interrupts are not supported; flag that
irqs are not enabled and avoid features which require interrupts.
Emit messages appropriate for the situation to aid in debugging should
device behavior be unexpected due to a failure to allocate vectors.
Note that it is possible for a device to have host based event
processing through polling. However, the driver does not support
polling and it is not anticipated to be generally required. Leave that
functionality to a future patch if such a device comes along.
Reported-by: Dave Larsen <davelarsen58@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-and-tested-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240117-dont-fail-irq-v2-1-f33f26b0e365@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull USB driver fixes from Greg KH:
"Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
here are:
- new usb-serial driver ids
- new dwc3 driver id added
- typec driver change revert
- ncm gadget driver endian bugfix
- xhci bugfixes for a number of reported issues
- usb hub bugfix for alternate settings
- ulpi driver debugfs memory leak fix
- chipidea driver bugfix
- usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
USB: serial: cp210x: add ID for IMST iM871A-USB
usb: typec: tcpm: fix the PD disabled case
usb: ucsi_acpi: Quirk to ack a connector change ack cmd
usb: ucsi_acpi: Fix command completion handling
usb: ucsi: Add missing ppm_lock
usb: ulpi: Fix debugfs directory leak
Revert "usb: typec: tcpm: fix cc role at port reset"
usb: gadget: pch_udc: fix an Excess kernel-doc warning
usb: f_mass_storage: forbid async queue when shutdown happen
USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
usb: chipidea: core: handle power lost in workqueue
usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
usb: dwc3: pci: add support for the Intel Arrow Lake-H
usb: core: Prevent null pointer dereference in update_port_device_state
xhci: handle isoc Babble and Buffer Overrun events properly
xhci: process isoc TD properly when there was a transaction error mid TD.
xhci: fix off by one check when adding a secondary interrupter.
xhci: fix possible null pointer dereference at secondary interrupter removal
...
If there is a problem after resetting a port, the do/while() loop that
checks the default value of DIVLSB register may run forever and spam the
I2C bus.
Add a delay before each read of DIVLSB, and a maximum number of tries to
prevent that situation from happening.
Also fail probe if port reset is unsuccessful.
Fixes: 10d8b34a4217 ("serial: max310x: Driver rework")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull timer fix from Borislav Petkov:
- Make sure a warning is issued when a hrtimer gets queued after the
timers have been migrated on the CPU down path and thus said timer
will get ignored
* tag 'timers_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Report offline hrtimer enqueue
Pull x86 fixes from Borislav Petkov:
- Correct the minimum CPU family for Transmeta Crusoe in Kconfig so
that such hw can boot again
- Do not take into accout XSTATE buffer size info supplied by userspace
when constructing a sigreturn frame
- Switch get_/put_user* to EX_TYPE_UACCESS exception handling when an
MCE is encountered so that it can be properly recovered from instead
of simply panicking
* tag 'x86_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6
x86/fpu: Stop relying on userspace for info to fault in xsave buffer
x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
The hrtimers migration on CPU-down hotplug process has been moved
earlier, before the CPU actually goes to die. This leaves a small window
of opportunity to queue an hrtimer in a blind spot, leaving it ignored.
For example a practical case has been reported with RCU waking up a
SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that
way a sched/rt timer to the local offline CPU.
Make sure such situations never go unnoticed and warn when that happens.
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com
Pull misc fixes from Andrew Morton:
"21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
nilfs2: fix potential bug in end_buffer_async_write
mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
MAINTAINERS: Leo Yan has moved
mm/zswap: don't return LRU_SKIP if we have dropped lru lock
fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super
mailmap: switch email address for John Moon
mm: zswap: fix objcg use-after-free in entry destruction
mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range()
arch/arm/mm: fix major fault accounting when retrying under per-VMA lock
selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros
mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page
mm: memcg: optimize parent iteration in memcg_rstat_updated()
nilfs2: fix data corruption in dsync block recovery for small block sizes
mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get()
exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock)
fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats
fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand()
getrusage: use sig->stats_lock rather than lock_task_sighand()
getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()
...
The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows
the following error message:
This kernel requires an i686 CPU, but only detected an i586 CPU.
Unable to boot - please use a kernel appropriate for your CPU.
Remove MCRUSOE from the condition introduced in commit in Fixes, effectively
changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the
CPU family given by CPUID.
[ bp: Massage commit message. ]
Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig")
Signed-off-by: Aleksander Mazur <deweloper@wp.pl>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240123134309.1117782-1-deweloper@wp.pl
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)
- Fix for a queue freezing issue in virtblk (Yi)
- blk-iocost underflow fix (Tejun)
- blk-wbt task detection fix (Jan)
* tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linux:
virtio-blk: Ensure no requests in virtqueues before deleting vqs.
blk-iocost: Fix an UBSAN shift-out-of-bounds warning
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
blk-wbt: Fix detection of dirty-throttled tasks
nvme-host: fix the updating of the firmware version
According to a syzbot report, end_buffer_async_write(), which handles the
completion of block device writes, may detect abnormal condition of the
buffer async_write flag and cause a BUG_ON failure when using nilfs2.
Nilfs2 itself does not use end_buffer_async_write(). But, the async_write
flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue
with race condition of competition between segments for dirty blocks") as
a means of resolving double list insertion of dirty blocks in
nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the
resulting crash.
This modification is safe as long as it is used for file data and b-tree
node blocks where the page caches are independent. However, it was
irrelevant and redundant to also introduce async_write for segment summary
and super root blocks that share buffers with the backing device. This
led to the possibility that the BUG_ON check in end_buffer_async_write
would fail as described above, if independent writebacks of the backing
device occurred in parallel.
The use of async_write for segment summary buffers has already been
removed in a previous change.
Fix this issue by removing the manipulation of the async_write flag for
the remaining super root block buffer.
Link: https://lkml.kernel.org/r/20240203161645.4992-1-konishi.ryusuke@gmail.com
Fixes: 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+5c04210f7c7f897c1e7f@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000019a97c05fd42f8c8@google.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Before this change, the expected size of the user space buffer was
taken from fx_sw->xstate_size. fx_sw->xstate_size can be changed
from user-space, so it is possible construct a sigreturn frame where:
* fx_sw->xstate_size is smaller than the size required by valid bits in
fx_sw->xfeatures.
* user-space unmaps parts of the sigrame fpu buffer so that not all of
the buffer required by xrstor is accessible.
In this case, xrstor tries to restore and accesses the unmapped area
which results in a fault. But fault_in_readable succeeds because buf +
fx_sw->xstate_size is within the still mapped area, so it goes back and
tries xrstor again. It will spin in this loop forever.
Instead, fault in the maximum size which can be touched by XRSTOR (taken
from fpstate->user_size).
[ dhansen: tweak subject / changelog ]
Fixes: fcb3635f5018 ("x86/fpu/signal: Handle #PF in the direct restore path")
Reported-by: Konstantin Bogomolov <bogomolov@google.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240130063603.3392627-1-avagin%40google.com
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
and extent handling code"
* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
ext4: make ext4_map_blocks() distinguish delalloc only extent
ext4: add a hole extent entry in cache after punch
ext4: correct the hole length returned by ext4_map_blocks()
ext4: convert to exclusive lock while inserting delalloc extents
ext4: refactor ext4_da_map_blocks()
ext4: remove 'needed' in trace_ext4_discard_preallocations
ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
ext4: remove unused return value of ext4_mb_release_group_pa
ext4: remove unused return value of ext4_mb_release_inode_pa
ext4: remove unused return value of ext4_mb_release
ext4: remove unused ext4_allocation_context::ac_groups_considered
ext4: remove unneeded return value of ext4_mb_release_context
ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
ext4: remove unused return value of __mb_check_buddy
ext4: mark the group block bitmap as corrupted before reporting an error
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
...
Pull firewire fix from Takashi Sakamoto:
"A change to accelerate the device detection step in some cases.
In the self-identification step after bus-reset, all nodes in the same
bus broadcast selfID packet including the value of gap count. The
value is related to the cable hops between nodes, and used to
calculate the subaction gap and the arbitration reset gap.
When each node has the different value of the gap count, the
asynchronous communication between them is unreliable, since an
asynchronous transaction could be interrupted by another asynchronous
transaction before completion. The gap count inconsistency can be
resolved by several ways; e.g. the transfer of PHY configuration
packet and generation of bus-reset.
The current implementation of firewire stack can correctly detect the
gap count inconsistency, however the recovery action from the
inconsistency tends to be delayed after reading configuration ROM of
root node. This results in the long time to probe devices in some
combinations of hardware.
Here the stack is changed to schedule the action as soon as possible"
* tag 'firewire-fixes-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: send bus reset promptly on gap count error
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.8
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)"
* tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme:
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
nvme-host: fix the updating of the firmware version
DAMON sysfs interface's update_schemes_tried_regions command has a timeout
of two apply intervals of the DAMOS scheme. Having zero value DAMOS
scheme apply interval means it will use the aggregation interval as the
value. However, the timeout setup logic is mistakenly using the sampling
interval insted of the aggregartion interval for the case. This could
cause earlier-than-expected timeout of the command. Fix it.
Link: https://lkml.kernel.org/r/20240202191956.88791-1-sj@kernel.org
Fixes: 7d6fa31a2fd7 ("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc27561f ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ]
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com
Pull smb client fixes from Steve French:
"Five smb3 client fixes, mostly multichannel related:
- four multichannel fixes including fix for channel allocation when
multiple inactive channels, fix for unneeded race in channel
deallocation, correct redundant channel scaling, and redundant
multichannel disabling scenarios
- add warning if max compound requests reached"
* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: increase number of PDUs allowed in a compound request
cifs: failure to add channel on iface should bump up weight
cifs: do not search for channel if server is terminating
cifs: avoid redundant calls to disable multichannel
cifs: make sure that channel scaling is done only once
Since ext4_map_blocks() can recognize a delayed allocated only extent,
make ext4_set_iomap() can also recognize it, and remove the useless
separate check in ext4_iomap_begin_report().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we are bus manager and the bus has inconsistent gap counts, send a
bus reset immediately instead of trying to read the root node's config
ROM first. Otherwise, we could spend a lot of time trying to read the
config ROM but never succeeding.
This eliminates a 50+ second delay before the FireWire bus is usable after
a newly connected device is powered on in certain circumstances.
The delay occurs if a gap count inconsistency occurs, we are not the root
node, and we become bus manager. One scenario that causes this is with a TI
XIO2213B OHCI, the first time a Sony DSR-25 is powered on after being
connected to the FireWire cable. In this configuration, the Linux box will
not receive the initial PHY configuration packet sent by the DSR-25 as IRM,
resulting in the DSR-25 having a gap count of 44 while the Linux box has a
gap count of 63.
FireWire devices have a gap count parameter, which is set to 63 on power-up
and can be changed with a PHY configuration packet. This determines the
duration of the subaction and arbitration gaps. For reliable communication,
all nodes on a FireWire bus must have the same gap count.
A node may have zero or more of the following roles: root node, bus manager
(BM), isochronous resource manager (IRM), and cycle master. Unless a root
node was forced with a PHY configuration packet, any node might become root
node after a bus reset. Only the root node can become cycle master. If the
root node is not cycle master capable, the BM or IRM should force a change
of root node.
After a bus reset, each node sends a self-ID packet, which contains its
current gap count. A single bus reset does not change the gap count, but
two bus resets in a row will set the gap count to 63. Because a consistent
gap count is required for reliable communication, IEEE 1394a-2000 requires
that the bus manager generate a bus reset if it detects that the gap count
is inconsistent.
When the gap count is inconsistent, build_tree() will notice this after the
self identification process. It will set card->gap_count to the invalid
value 0. If we become bus master, this will force bm_work() to send a bus
reset when it performs gap count optimization.
After a bus reset, there is no bus manager. We will almost always try to
become bus manager. Once we become bus manager, we will first determine
whether the root node is cycle master capable. Then, we will determine if
the gap count should be changed. If either the root node or the gap count
should be changed, we will generate a bus reset.
To determine if the root node is cycle master capable, we read its
configuration ROM. bm_work() will wait until we have finished trying to
read the configuration ROM.
However, an inconsistent gap count can make this take a long time.
read_config_rom() will read the first few quadlets from the config ROM. Due
to the gap count inconsistency, eventually one of the reads will time out.
When read_config_rom() fails, fw_device_init() calls it again until
MAX_RETRIES is reached. This takes 50+ seconds.
Once we give up trying to read the configuration ROM, bm_work() will wake
up, assume that the root node is not cycle master capable, and do a bus
reset. Hopefully, this will resolve the gap count inconsistency.
This change makes bm_work() check for an inconsistent gap count before
waiting for the root node's configuration ROM. If the gap count is
inconsistent, bm_work() will immediately do a bus reset. This eliminates
the 50+ second delay and rapidly brings the bus to a working state.
I considered that if the gap count is inconsistent, a PHY configuration
packet might not be successful, so it could be desirable to skip the PHY
configuration packet before the bus reset in this case. However, IEEE
1394a-2000 and IEEE 1394-2008 say that the bus manager may transmit a PHY
configuration packet before a bus reset when correcting a gap count error.
Since the standard endorses this, I decided it's safe to retain the PHY
configuration packet transmission.
Normally, after a topology change, we will reset the bus a maximum of 5
times to change the root node and perform gap count optimization. However,
if there is a gap count inconsistency, we must always generate a bus reset.
Otherwise the gap count inconsistency will persist and communication will
be unreliable. For that reason, if there is a gap count inconstency, we
generate a bus reset even if we already reached the 5 reset limit.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Reference: https://sourceforge.net/p/linux1394/mailman/message/58727806/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Ensure no remaining requests in virtqueues before resetting vdev and
deleting virtqueues. Otherwise these requests will never be completed.
It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become
in_flight status, but it cannot guarantee that requests have been
processed by the device. Virtqueues should never be deleted before
all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues
become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Syzbot reported a hang issue in migrate_pages_batch() called by mbind()
and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2.
While migrate_pages_batch() locks a folio and waits for the writeback to
complete, the log writer thread that should bring the writeback to
completion picks up the folio being written back in
nilfs_lookup_dirty_data_buffers() that it calls for subsequent log
creation and was trying to lock the folio. Thus causing a deadlock.
In the first place, it is unexpected that folios/pages in the middle of
writeback will be updated and become dirty. Nilfs2 adds a checksum to
verify the validity of the log being written and uses it for recovery at
mount, so data changes during writeback are suppressed. Since this is
broken, an unclean shutdown could potentially cause recovery to fail.
Investigation revealed that the root cause is that the wait for writeback
completion in nilfs_page_mkwrite() is conditional, and if the backing
device does not require stable writes, data may be modified without
waiting.
Fix these issues by making nilfs_page_mkwrite() wait for writeback to
finish regardless of the stable write requirement of the backing device.
Link: https://lkml.kernel.org/r/20240131145657.4209-1-konishi.ryusuke@gmail.com
Fixes: 1d1d1a767206 ("mm: only enforce stable page writes if the backing device requires it")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ee2ae68da3b22d04cd8d@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000047d819061004ad6c@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull xfs fixes from Chandan Babu:
- Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
attribute fork
- Remove conditional compilation of realtime geometry validator
functions to prevent confusing error messages from being printed on
the console during the mount operation
* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove conditional building of rt geometry validator functions
xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
With the introduction of SMB2_OP_QUERY_WSL_EA, the client may now send
5 commands in a single compound request in order to query xattrs from
potential WSL reparse points, which should be fine as we currently
allow up to 5 PDUs in a single compound request. However, if
encryption is enabled (e.g. 'seal' mount option) or enforced by the
server, current MAX_COMPOUND(5) won't be enough as we require an extra
PDU for the transform header.
Fix this by increasing MAX_COMPOUND to 7 and, while we're at it, add
an WARN_ON_ONCE() and return -EIO instead of -ENOMEM in case we
attempt to send a compound request that couldn't include the extra
transform header.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a new map flag EXT4_MAP_DELAYED to indicate the mapping range is a
delayed allocated only (not unwritten) one, and making
ext4_map_blocks() can distinguish it, no longer mixing it with holes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull SCSI fixes from James Bottomley:
"Three small driver fixes and one core fix.
The core fix being a fixup to the one in the last pull request which
didn't entirely move checking of scsi_host_busy() out from under the
host lock"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare()
scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()
scsi: lpfc: Use unsigned type for num_sge
scsi: core: Move scsi_host_busy() out of host lock if it is for per-command
ksmbd_iov_pin_rsp_read() doesn't free the provided aux buffer if it
fails. Seems to be the caller's responsibility to clear the buffer in
error case.
Found by Linux Verification Center (linuxtesting.org).
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
Reported-by: Breno Leitão <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5160a5a53c0c ("blk-iocost: implement delay adjustment hysteresis")
Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The functions and the attribute listed in the comment doesn't exists in
the code, (ns->logging_enabled, nvme_passthru_err_log_enabled_store()
and nvme_passthru_err_log_enabled_show())
Update the comment with right function names and a comment
ns->head->passthru_err_log_enabled,
nvme_io_passthru_err_log_enabled_store() and
nvme_io_passthru_err_log_enabled_show().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
I will lose access to my @linaro.org email address next week, update the
MAINTAINERS file and map it in .mailmap with the new email address.
Link: https://lkml.kernel.org/r/20240201021022.886-1-leo.yan@linux.dev
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.8-rc3. They include:
- Android binder long-term bug with epoll finally being fixed
- fastrpc driver shutdown bugfix
- open-dice lockdep fix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: signal epoll threads of self-work
misc: open-dice: Fix spurious lockdep warning
misc: fastrpc: Mark all sessions as invalid in cb_remove
I mistakenly turned off CONFIG_XFS_RT in the Kconfig file for arm64
variant of the djwong-wtf git branch. Unfortunately, it took me a good
hour to figure out that RT wasn't built because this is what got printed
to dmesg:
XFS (sda2): realtime geometry sanity check failed
XFS (sda2): Metadata corruption detected at xfs_sb_read_verify+0x170/0x190 [xfs], xfs_sb block 0x0
Whereas I would have expected:
XFS (sda2): Not built with CONFIG_XFS_RT
XFS (sda2): RT mount failed
The root cause of these problems is the conditional compilation of the
new functions xfs_validate_rtextents and xfs_compute_rextslog that I
introduced in the two commits listed below. The !RT versions of these
functions return false and 0, respectively, which causes primary
superblock validation to fail, which explains the first message.
Move the two functions to other parts of libxfs that are not
conditionally defined by CONFIG_XFS_RT and remove the broken stubs so
that validation works again.
Fixes: e14293803f4e ("xfs: don't allow overly small or large realtime volumes")
Fixes: a6a38f309afc ("xfs: make rextslog computation consistent with mkfs")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
After the interface selection policy change to do a weighted
round robin, each iface maintains a weight_fulfilled. When the
weight_fulfilled reaches the total weight for the iface, we know
that the weights can be reset and ifaces can be allocated from
scratch again.
During channel allocation failures on a particular channel,
weight_fulfilled is not incremented. If a few interfaces are
inactive, we could end up in a situation where the active
interfaces are all allocated for the total_weight, and inactive
ones are all that remain. This can cause a situation where
no more channels can be allocated further.
This change fixes it by increasing weight_fulfilled, even when
channel allocation failure happens. This could mean that if
there are temporary failures in channel allocation, the iface
weights may not strictly be adhered to. But that's still okay.
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to cache hole extents in the extent status tree and keep the
hole length as long as possible, re-add a hole entry to the cache just
after punching a hole.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull smb client fixes from Steve French:
- reconnect fix
- multichannel channel selection fix
- minor mount warning fix
- reparse point fix
- null pointer check improvement
* tag '6.8-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: clarify mount warning
cifs: handle cases where multiple sessions share connection
cifs: change tcon status when need_reconnect is set on it
smb: client: set correct d_type for reparse points under DFS mounts
smb3: add missing null server pointer check
If ufshcd_err_handler() is called in a suspend/resume situation,
ufs_release() can be called twice and active_reqs end up going negative.
This is because ufshcd_err_handling_prepare() and
ufshcd_err_handling_unprepare() both call ufshcd_release().
Remove superfluous call to ufshcd_release().
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240122083324.11797-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ksmbd_extract_sharename() function lacked a complete kernel-doc
comment. This patch adds parameter descriptions and detailed function
behavior to improve code readability and maintainability.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The detection of dirty-throttled tasks in blk-wbt has been subtly broken
since its beginning in 2016. Namely if we are doing cgroup writeback and
the throttled task is not in the root cgroup, balance_dirty_pages() will
set dirty_sleep for the non-root bdi_writeback structure. However
blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback
structure. Thus detection of recently throttled tasks is not working in
this case (we noticed this when we switched to cgroup v2 and suddently
writeback was slow).
Since blk-wbt has no easy way to get to proper bdi_writeback and
furthermore its intention has always been to work on the whole device
rather than on individual cgroups, just move the dirty_sleep timestamp
from bdi_writeback to backing_dev_info. That fixes the checking for
recently throttled task and saves memory for everybody as a bonus.
CC: stable@vger.kernel.org
Fixes: b57d74aff9ab ("writeback: track if we're sleeping on progress in balance_dirty_pages()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz
[axboe: fixup indentation errors]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The namespace does not have attributes, but the head does. Move the new
logging attribute to that structure instead of dereferencing the wrong
type.
And while we're here, fix the reverse-tree coding style.
Fixes: 9f079dda14339e ("nvme: allow passthru cmd error logging")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Tested-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
LRU_SKIP can only be returned if we don't ever dropped lru lock, or we
need to return LRU_RETRY to restart from the head of lru list.
Otherwise, the iteration might continue from a cursor position that was
freed while the locks were dropped.
Actually we may need to introduce another LRU_STOP to really terminate the
ongoing shrinking scan process, when we encounter a warm page already in
the swap cache. The current list_lru implementation doesn't have this
function to early break from __list_lru_walk_one.
Link: https://lkml.kernel.org/r/20240126-zswap-writeback-race-v2-1-b10479847099@bytedance.com
Fixes: b5ba474f3f51 ("zswap: shrink zswap pool based on memory pressure")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chris Li <chriscli@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull MIPS fixes from Thomas Bogendoerfer:
- fix boot issue on single core Lantiq Danube devices
- fix boot issue on Loongson64 platforms
- fix improper FPU setup
- fix missing prototypes issues
* tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
MIPS: loongson64: set nid for reserved memblock region
Revert "MIPS: loongson64: set nid for reserved memblock region"
MIPS: lantiq: register smp_ops on non-smp platforms
MIPS: loongson64: set nid for reserved memblock region
MIPS: reserve exception vector space ONLY ONCE
MIPS: BCM63XX: Fix missing prototypes
MIPS: sgi-ip32: Fix missing prototypes
MIPS: sgi-ip30: Fix missing prototypes
MIPS: fw arc: Fix missing prototypes
MIPS: sgi-ip27: Fix missing prototypes
MIPS: Alchemy: Fix missing prototypes
MIPS: Cobalt: Fix missing prototypes
Creating a region with 16 memory devices caused a problem. The div_u64_rem
function, used for dividing an unsigned 64-bit number by a 32-bit one,
faced an issue when SZ_256M * p->interleave_ways. The result surpassed
the maximum limit of the 32-bit divisor (4G), leading to an overflow
and a remainder of 0.
note: At this point, p->interleave_ways is 16, meaning 16 * 256M = 4G
To fix this issue, I replaced the div_u64_rem function with div64_u64_rem
and adjusted the type of the remainder.
Signed-off-by: Quanquan Cao <caoqq@fujitsu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 23a22cd1c98b ("cxl/region: Allocate HPA capacity to regions")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
resolve a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: max310x: prevent infinite while() loop in port startup
serial: max310x: fail probe if clock crystal is unstable
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
serial: core: Fix atomicity violation in uart_tiocmget
serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
tty: serial: Fix bit order in RS485 flag definitions
In (e)poll mode, threads often depend on I/O events to determine when
data is ready for consumption. Within binder, a thread may initiate a
command via BINDER_WRITE_READ without a read buffer and then make use
of epoll_wait() or similar to consume any responses afterwards.
It is then crucial that epoll threads are signaled via wakeup when they
queue their own work. Otherwise, they risk waiting indefinitely for an
event leaving their work unhandled. What is worse, subsequent commands
won't trigger a wakeup either as the thread has pending work.
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Steven Moreland <smoreland@google.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In XFS_DAS_NODE_REMOVE_ATTR case, xfs_attr_mode_remove_attr() sets
filter to XFS_ATTR_INCOMPLETE. The filter is then reset in
xfs_attr_complete_op() if XFS_DA_OP_REPLACE operation is performed.
The filter is not reset though if XFS just removes the attribute
(args->value == NULL) with xfs_attr_defer_remove(). attr code goes
to XFS_DAS_DONE state.
Fix this by always resetting XFS_ATTR_INCOMPLETE filter. The replace
operation already resets this filter in anyway and others are
completed at this step hence don't need it.
Fixes: fdaf1bb3cafc ("xfs: ATTR_REPLACE algorithm with LARP enabled needs rework")
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In order to scale down the channels, the following sequence
of operations happen:
1. server struct is marked for terminate
2. the channel is deallocated in the ses->chans array
3. at a later point the cifsd thread actually terminates the server
Between 2 and 3, there can be calls to find the channel for
a server struct. When that happens, there can be an ugly warning
that's logged. But this is expected.
So this change does two things:
1. in cifs_ses_get_chan_index, if server->terminate is set, return
2. always make sure server->terminate is set with chan_lock held
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In ext4_map_blocks(), if we can't find a range of mapping in the
extents cache, we are calling ext4_ext_map_blocks() to search the real
path and ext4_ext_determine_hole() to determine the hole range. But if
the querying range was partially or completely overlaped by a delalloc
extent, we can't find it in the real extent path, so the returned hole
length could be incorrect.
Fortunately, ext4_ext_put_gap_in_cache() have already handle delalloc
extent, but it searches start from the expanded hole_start, doesn't
start from the querying range, so the delalloc extent found could not be
the one that overlaped the querying range, plus, it also didn't adjust
the hole length. Let's just remove ext4_ext_put_gap_in_cache(), handle
delalloc and insert adjusted hole extent in ext4_ext_determine_hole().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull ceph fixes from Ilya Dryomov:
"Some fscrypt-related fixups (sparse reads are used only for encrypted
files) and two cap handling fixes from Xiubo and Rishabh"
* tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-client:
ceph: always check dir caps asynchronously
ceph: prevent use-after-free in encode_cap_msg()
ceph: always set initial i_blkbits to CEPH_FSCRYPT_BLOCK_SHIFT
libceph: just wait for more data to be available on the socket
libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*()
libceph: fail sparse-read if the data length doesn't match
When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When task_tag >= 32 (in MCQ mode) and sizeof(unsigned int) == 4, 1U <<
task_tag will out of bounds for a u32 mask. Fix this up to prevent
SHIFT_ISSUE (bitwise shifts that are out of bounds for their data type).
[name:debug_monitors&]Unexpected kernel BRK exception at EL1
[name:traps&]Internal error: BRK handler: 00000000f2005514 [#1] PREEMPT SMP
[name:mediatek_cpufreq_hw&]cpufreq stop DVFS log done
[name:mrdump&]Kernel Offset: 0x1ba5800000 from 0xffffffc008000000
[name:mrdump&]PHYS_OFFSET: 0x80000000
[name:mrdump&]pstate: 22400005 (nzCv daif +PAN -UAO)
[name:mrdump&]pc : [0xffffffdbaf52bb2c] ufshcd_clear_cmd+0x280/0x288
[name:mrdump&]lr : [0xffffffdbaf52a774] ufshcd_wait_for_dev_cmd+0x3e4/0x82c
[name:mrdump&]sp : ffffffc0081471b0
<snip>
Workqueue: ufs_eh_wq_0 ufshcd_err_handler
Call trace:
dump_backtrace+0xf8/0x144
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x9c
dump_stack+0x18/0x44
mrdump_common_die+0x254/0x480 [mrdump]
ipanic_die+0x20/0x30 [mrdump]
notify_die+0x15c/0x204
die+0x10c/0x5f8
arm64_notify_die+0x74/0x13c
do_debug_exception+0x164/0x26c
el1_dbg+0x64/0x80
el1h_64_sync_handler+0x3c/0x90
el1h_64_sync+0x68/0x6c
ufshcd_clear_cmd+0x280/0x288
ufshcd_wait_for_dev_cmd+0x3e4/0x82c
ufshcd_exec_dev_cmd+0x5bc/0x9ac
ufshcd_verify_dev_init+0x84/0x1c8
ufshcd_probe_hba+0x724/0x1ce0
ufshcd_host_reset_and_restore+0x260/0x574
ufshcd_reset_and_restore+0x138/0xbd0
ufshcd_err_handler+0x1218/0x2f28
process_one_work+0x5fc/0x1140
worker_thread+0x7d8/0xe20
kthread+0x25c/0x468
ret_from_fork+0x10/0x20
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Link: https://lore.kernel.org/r/20240205104905.24929-1-alice.chao@mediatek.com
Reviewed-by: Stanley Jhu <chu.stanley@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 82b74cac2849 ("blk-ioprio: Convert from rqos policy to direct
call") pushed setting bio I/O priority down into blk_mq_submit_bio()
-- which is too low within block core's submit_bio() because it
skips setting I/O priority for block drivers that implement
fops->submit_bio() (e.g. DM, MD, etc).
Fix this by moving bio_set_ioprio() up from blk-mq.c to blk-core.c and
call it from submit_bio(). This ensures all block drivers call
bio_set_ioprio() during initial bio submission.
Fixes: a78418e6a04c ("block: Always initialize bio IO priority on submit")
Co-developed-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Yibin Ding <yibin.ding@unisoc.com>
Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
[snitzer: revised commit header]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240130202638.62600-2-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The original code didn't update the firmware version if the
"next slot" of the AFI register isn't zero or if the
"current slot" field is zero; in those cases it assumed
that a reset was needed.
However, the NVMe specification doesn't exclude the possibility that
the "next slot" value is equal to the "current slot" value,
meaning that the same firmware slot will be activated after performing
a controller level reset; in this case a reset is clearly not
necessary and we can safely update the firmware version.
Modify the code so the kernel will report that a Controller Level Reset
is needed only in the following cases:
1) If the "current slot" field is zero. This is invalid and means that
something is wrong, a reset is needed.
or
2) if the "next slot" field isn't zero AND it's not equal to the
"current slot" value. This means that at the next reset a different
firmware slot will be activated.
Fixes: 983a338b96c8 ("nvme: update firmware version after commit")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When configuring a hugetlb filesystem via the fsconfig() syscall, there is
a possible NULL dereference in hugetlbfs_fill_super() caused by assigning
NULL to ctx->hstate in hugetlbfs_parse_param() when the requested pagesize
is non valid.
E.g: Taking the following steps:
fd = fsopen("hugetlbfs", FSOPEN_CLOEXEC);
fsconfig(fd, FSCONFIG_SET_STRING, "pagesize", "1024", 0);
fsconfig(fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0);
Given that the requested "pagesize" is invalid, ctxt->hstate will be replaced
with NULL, losing its previous value, and we will print an error:
...
...
case Opt_pagesize:
ps = memparse(param->string, &rest);
ctx->hstate = h;
if (!ctx->hstate) {
pr_err("Unsupported page size %lu MB\n", ps / SZ_1M);
return -EINVAL;
}
return 0;
...
...
This is a problem because later on, we will dereference ctxt->hstate in
hugetlbfs_fill_super()
...
...
sb->s_blocksize = huge_page_size(ctx->hstate);
...
...
Causing below Oops.
Fix this by replacing cxt->hstate value only when then pagesize is known
to be valid.
kernel: hugetlbfs: Unsupported page size 0 MB
kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028
kernel: #PF: supervisor read access in kernel mode
kernel: #PF: error_code(0x0000) - not-present page
kernel: PGD 800000010f66c067 P4D 800000010f66c067 PUD 1b22f8067 PMD 0
kernel: Oops: 0000 [#1] PREEMPT SMP PTI
kernel: CPU: 4 PID: 5659 Comm: syscall Tainted: G E 6.8.0-rc2-default+ #22 5a47c3fef76212addcc6eb71344aabc35190ae8f
kernel: Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017
kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0
kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28
kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004
kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000
kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004
kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000
kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400
kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0
kernel: Call Trace:
kernel: <TASK>
kernel: ? __die_body+0x1a/0x60
kernel: ? page_fault_oops+0x16f/0x4a0
kernel: ? search_bpf_extables+0x65/0x70
kernel: ? fixup_exception+0x22/0x310
kernel: ? exc_page_fault+0x69/0x150
kernel: ? asm_exc_page_fault+0x22/0x30
kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10
kernel: ? hugetlbfs_fill_super+0xb4/0x1a0
kernel: ? hugetlbfs_fill_super+0x28/0x1a0
kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10
kernel: vfs_get_super+0x40/0xa0
kernel: ? __pfx_bpf_lsm_capable+0x10/0x10
kernel: vfs_get_tree+0x25/0xd0
kernel: vfs_cmd_create+0x64/0xe0
kernel: __x64_sys_fsconfig+0x395/0x410
kernel: do_syscall_64+0x80/0x160
kernel: ? syscall_exit_to_user_mode+0x82/0x240
kernel: ? do_syscall_64+0x8d/0x160
kernel: ? syscall_exit_to_user_mode+0x82/0x240
kernel: ? do_syscall_64+0x8d/0x160
kernel: ? exc_page_fault+0x69/0x150
kernel: entry_SYSCALL_64_after_hwframe+0x6e/0x76
kernel: RIP: 0033:0x7ffbc0cb87c9
kernel: Code: 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 96 0d 00 f7 d8 64 89 01 48
kernel: RSP: 002b:00007ffc29d2f388 EFLAGS: 00000206 ORIG_RAX: 00000000000001af
kernel: RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffbc0cb87c9
kernel: RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003
kernel: RBP: 00007ffc29d2f3b0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
kernel: R13: 00007ffc29d2f4c0 R14: 0000000000000000 R15: 0000000000000000
kernel: </TASK>
kernel: Modules linked in: rpcsec_gss_krb5(E) auth_rpcgss(E) nfsv4(E) dns_resolver(E) nfs(E) lockd(E) grace(E) sunrpc(E) netfs(E) af_packet(E) bridge(E) stp(E) llc(E) iscsi_ibft(E) iscsi_boot_sysfs(E) intel_rapl_msr(E) intel_rapl_common(E) iTCO_wdt(E) intel_pmc_bxt(E) sb_edac(E) iTCO_vendor_support(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) rfkill(E) ipmi_ssif(E) kvm(E) acpi_ipmi(E) irqbypass(E) pcspkr(E) igb(E) ipmi_si(E) mei_me(E) i2c_i801(E) joydev(E) intel_pch_thermal(E) i2c_smbus(E) dca(E) lpc_ich(E) mei(E) ipmi_devintf(E) ipmi_msghandler(E) acpi_pad(E) tiny_power_button(E) button(E) fuse(E) efi_pstore(E) configfs(E) ip_tables(E) x_tables(E) ext4(E) mbcache(E) jbd2(E) hid_generic(E) usbhid(E) sd_mod(E) t10_pi(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) polyval_clmulni(E) ahci(E) xhci_pci(E) polyval_generic(E) gf128mul(E) ghash_clmulni_intel(E) sha512_ssse3(E) sha256_ssse3(E) xhci_pci_renesas(E) libahci(E) ehci_pci(E) sha1_ssse3(E) xhci_hcd(E) ehci_hcd(E) libata(E)
kernel: mgag200(E) i2c_algo_bit(E) usbcore(E) wmi(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) scsi_common(E) aesni_intel(E) crypto_simd(E) cryptd(E)
kernel: Unloaded tainted modules: acpi_cpufreq(E):1 fjes(E):1
kernel: CR2: 0000000000000028
kernel: ---[ end trace 0000000000000000 ]---
kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0
kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28
kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004
kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000
kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004
kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000
kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400
kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0
Link: https://lkml.kernel.org/r/20240130210418.3771-1-osalvador@suse.de
Fixes: 32021982a324 ("hugetlbfs: Convert to fs_context")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If we still own the FPU after initializing fcr31, when we are preempted
the dirty value in the FPU will be read out and stored into fcr31,
clobbering our setting. This can cause an improper floating-point
environment after execve(). For example:
zsh% cat measure.c
#include <fenv.h>
int main() { return fetestexcept(FE_INEXACT); }
zsh% cc measure.c -o measure -lm
zsh% echo $((1.0/3)) # raising FE_INEXACT
0.33333333333333331
zsh% while ./measure; do ; done
(stopped in seconds)
Call lose_fpu(0) before setting fcr31 to prevent this.
Closes: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/
Fixes: 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CXL 3.1 Section 3.1.1 states:
"A Function on a CXL device must not generate INTx messages if
that Function participates in CXL.cache protocol or CXL.mem
protocols."
The generic CXL memory driver only supports devices which use the
CXL.mem protocol. The current driver attempts to allocate MSI/MSI-X
vectors in anticipation of their need for mailbox interrupts or event
processing. However, the above requirement does not require a device to
support interrupts, only that they use MSI/MSI-X. For example, a device
may disable mailbox interrupts and either be configured for firmware
first or skip event processing and function.
Dave Larsen reported that the following Intel / Agilex card does not
support interrupts on function 0.
CXL: Intel Corporation Device 0ddb (rev 01) (prog-if 10 [CXL Memory Device (CXL 2.x)])
Rather than fail device probe if interrupts are not supported; flag that
irqs are not enabled and avoid features which require interrupts.
Emit messages appropriate for the situation to aid in debugging should
device behavior be unexpected due to a failure to allocate vectors.
Note that it is possible for a device to have host based event
processing through polling. However, the driver does not support
polling and it is not anticipated to be generally required. Leave that
functionality to a future patch if such a device comes along.
Reported-by: Dave Larsen <davelarsen58@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-and-tested-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240117-dont-fail-irq-v2-1-f33f26b0e365@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull USB driver fixes from Greg KH:
"Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
here are:
- new usb-serial driver ids
- new dwc3 driver id added
- typec driver change revert
- ncm gadget driver endian bugfix
- xhci bugfixes for a number of reported issues
- usb hub bugfix for alternate settings
- ulpi driver debugfs memory leak fix
- chipidea driver bugfix
- usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
USB: serial: cp210x: add ID for IMST iM871A-USB
usb: typec: tcpm: fix the PD disabled case
usb: ucsi_acpi: Quirk to ack a connector change ack cmd
usb: ucsi_acpi: Fix command completion handling
usb: ucsi: Add missing ppm_lock
usb: ulpi: Fix debugfs directory leak
Revert "usb: typec: tcpm: fix cc role at port reset"
usb: gadget: pch_udc: fix an Excess kernel-doc warning
usb: f_mass_storage: forbid async queue when shutdown happen
USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
usb: chipidea: core: handle power lost in workqueue
usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
usb: dwc3: pci: add support for the Intel Arrow Lake-H
usb: core: Prevent null pointer dereference in update_port_device_state
xhci: handle isoc Babble and Buffer Overrun events properly
xhci: process isoc TD properly when there was a transaction error mid TD.
xhci: fix off by one check when adding a secondary interrupter.
xhci: fix possible null pointer dereference at secondary interrupter removal
...
If there is a problem after resetting a port, the do/while() loop that
checks the default value of DIVLSB register may run forever and spam the
I2C bus.
Add a delay before each read of DIVLSB, and a maximum number of tries to
prevent that situation from happening.
Also fail probe if port reset is unsuccessful.
Fixes: 10d8b34a4217 ("serial: max310x: Driver rework")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>