Pull clk fixes from Stephen Boyd:
"Fixes for the Allwinner A523 clk driver:

- Lower the minimum rate for the A523 audio PLL to support
frequencies required by audio devices

- Mark a couple clks critical on A523 so that Linux doesn't turn them
off when they're used by other code like TF-A"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: sun55i-a523-ccu: Lower audio0 pll minimum rate
clk: sunxi-ng: sun55i-a523-r-ccu: Mark bus-r-dma as critical
clk: sunxi-ng: Mark A523 bus-r-cpucfg clock as critical

Pull timer fixes from Ingo Molnar:

- Fix a race in timer->function clearing in timer_shutdown_sync()

- Fix a timekeeper sysfs-setup resource leak in error paths

- Fix the NOHZ report_idle_softirq() syslog rate-limiting
logic to have no side effects on the return value

* tag 'timers-urgent-2025-11-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix NULL function pointer race in timer_shutdown_sync()
timekeeping: Fix resource leak in tk_aux_sysfs_init() error paths
tick/sched: Fix bogus condition in report_idle_softirq()

Pull Allwinner clk driver fixes from Chen-Yu Tsai:

Just a couple fixes for the A523 family. A couple clocks are marked as
critical, and the lower bound of the audio PLL was lowered to match
the datasheet.

* tag 'sunxi-clk-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: sun55i-a523-ccu: Lower audio0 pll minimum rate
clk: sunxi-ng: sun55i-a523-r-ccu: Mark bus-r-dma as critical
clk: sunxi-ng: Mark A523 bus-r-cpucfg clock as critical

Pull perf fixes from Ingo Molnar:
"Fix perf CPU-clock counters, and address a static checker warning"

* tag 'perf-urgent-2025-11-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix 0 count issue of cpu-clock
perf/x86/intel/uncore: Remove superfluous check

There is a race condition between timer_shutdown_sync() and timer
expiration that can lead to hitting a WARN_ON in expire_timers().

The issue occurs when timer_shutdown_sync() clears the timer function
to NULL while the timer is still running on another CPU. The race
scenario looks like this:

CPU0 CPU1
<SOFTIRQ>
lock_timer_base()
expire_timers()
base->running_timer = timer;
unlock_timer_base()
[call_timer_fn enter]
mod_timer()
...
timer_shutdown_sync()
lock_timer_base()
// For now, will not detach the timer but only clear its function to NULL
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
[call_timer_fn exit]
lock_timer_base()
base->running_timer = NULL;
unlock_timer_base()
...
// Now timer is pending while its function set to NULL.
// next timer trigger
<SOFTIRQ>
expire_timers()
WARN_ON_ONCE(!fn) // hit
...
lock_timer_base()
// Now timer will detach
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()

The problem is that timer_shutdown_sync() clears the timer function
regardless of whether the timer is currently running. This can leave a
pending timer with a NULL function pointer, which triggers the
WARN_ON_ONCE(!fn) check in expire_timers().

Fix this by only clearing the timer function when actually detaching the
timer. If the timer is running, leave the function pointer intact, which is
safe because the timer will be properly detached when it finishes running.

Fixes: 0cc04e80458a ("timers: Add shutdown mechanism to the internal functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251122093942.301559-1-zouyipeng@huawei.com

While the user manual states that the PLL's rate should be between 180
MHz and 3 GHz in the register defninition section, it also says the
actual operating frequency is 22.5792*4 MHz in the PLL features table.

22.5792*4 MHz is one of the actual clock rates that we want and is
is available in the SDM table. Lower the minimum clock rate to 90 MHz
so that both rates in the SDM table can be used.

Fixes: 7cae1e2b5544 ("clk: sunxi-ng: Add support for the A523/T527 CCU PLLs")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251020171059.2786070-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>

Pull MIPS fixes from Thomas Bogendoerfer:

- Fix CPU type in DT for econet

- Fix for Malta PCI MMIO breakage for SOC-it

- Fix TLB shutdown caused by iniital uniquification

- Fix random seg faults due to missed vdso storage requirement

* tag 'mips-fixes_6.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kernel: Fix random segmentation faults
MIPS: mm: Prevent a TLB shutdown on initial uniquification
mips: dts: econet: fix EN751221 core type
MIPS: Malta: Fix !EVA SOC-it PCI MMIO

Currently cpu-clock event always returns 0 count, e.g.,

perf stat -e cpu-clock -- sleep 1

Performance counter stats for 'sleep 1':
0 cpu-clock # 0.000 CPUs utilized
1.002308394 seconds time elapsed

The root cause is the commit 'bc4394e5e79c ("perf: Fix the throttle
error of some clock events")' adds PERF_EF_UPDATE flag check before
calling cpu_clock_event_update() to update the count, however the
PERF_EF_UPDATE flag is never set when the cpu-clock event is stopped in
counting mode (pmu->dev() -> cpu_clock_event_del() ->
cpu_clock_event_stop()). This leads to the cpu-clock event count is
never updated.

To fix this issue, force to set PERF_EF_UPDATE flag for cpu-clock event
just like what task-clock does.

Fixes: bc4394e5e79c ("perf: Fix the throttle error of some clock events")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20251112080526.3971392-1-dapeng1.mi@linux.intel.com

tk_aux_sysfs_init() returns immediately on error during the auxiliary clock
initialization loop without cleaning up previously allocated kobjects and
sysfs groups.

If kobject_create_and_add() or sysfs_create_group() fails during loop
iteration, the parent kobjects (tko and auxo) and any previously created
child kobjects are leaked.

Fix this by adding proper error handling with goto labels to ensure all
allocated resources are cleaned up on failure. kobject_put() on the
parent kobjects will handle cleanup of their children.

Fixes: 7b95663a3d96 ("timekeeping: Provide interface to control auxiliary clocks")
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251120150213.246777-1-mrout@redhat.com

Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"

* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"

The "bus-r-dma" clock in the A523's PRCM clock controller is also
referred to as "DMA_CLKEN_SW" or "DMA ADB400 gating". It is unclear how
this ties into the DMA controller MBUS clock gate; however if the clock
is not enabled, the DMA controller in the MCU block will fail to access
DRAM, even failing to retrieve the DMA descriptors.

Mark this clock as critical. This sort of mirrors what is done for the
main DMA controller's MBUS clock, which has a separate toggle that is
currently left out of the main clock controller driver.

Fixes: 8cea339cfb81 ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251020171059.2786070-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>

Pull crypto library fix from Eric Biggers:
"Fix another KMSAN warning that made it in while KMSAN wasn't working
reliably"

* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: tests: Fix KMSAN warning in test_sha256_finup_2x()

Commit 69896119dc9d ("MIPS: vdso: Switch to generic storage
implementation") switches to a generic vdso storage, which increases
the number of data pages from 1 to 4. But there is only one page
reserved, which causes segementation faults depending where the VDSO
area is randomized to. To fix this use the same size of reservation
and allocation of the VDSO data pages.

Fixes: 69896119dc9d ("MIPS: vdso: Switch to generic storage implementation")
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The 'pmu' pointer cannot be NULL, as it is taken as a pointer to an array.
Remove the superfluous NULL check.

Found by Coverity: CID#1497507.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20251119091538.825307-1-jirislaby@kernel.org

In commit 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the
new function report_idle_softirq() was created by breaking code out of the
existing can_stop_idle_tick() for kernels v5.18 and newer.

In doing so, the code essentially went from this form:

if (A) {
static int ratelimit;
if (ratelimit < 10 && !C && A&D) {
pr_warn("NOHZ tick-stop error: ...");
ratelimit++;
}
return false;
}

to a new function:

static bool report_idle_softirq(void)
{
static int ratelimit;

if (likely(!A))
return false;

if (ratelimit < 10)
return false;
...
pr_warn("NOHZ tick-stop error: local softirq work is pending, handler #%02x!!!\n",
pending);
ratelimit++;

return true;
}

commit a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition") realized
ratelimit was essentially set to zero instead of ten, and hence *no*
softirq pending messages would ever be issued, but "fixed" it as:

- if (ratelimit < 10)
+ if (ratelimit >= 10)
return false;

However, this fix introduced another issue:

When ratelimit is greater than or equal 10, even if A is true, it will
directly return false. While ratelimit in the original code was only used
to control printing and will not affect the return value.

Restore the original logic and restrict ratelimit to control the printk and
not the return value.

Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Fixes: a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition")
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251119174525.29470-1-wen.yang@linux.dev

Pull irq fixes from Borislav Petkov:

- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior

- Fix a function's retval check in aspeed-scu-ic

* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check

This reverts commit 1a2b423be6a89dd07d5fc27ea042be68697a6a49 because we
got a regression report and need time to find out the details.

Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/29ec0082-4dd4-4120-acd2-44b35b4b9487@oss.qualcomm.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

bus-r-cpucfg clock is important for peripheral which takes care of
powering CPU cores on and off. Since this operation is done by firmware
(TF-A), mark it as critical. That way Linux won't interfere with that
clock.

Fixes: 8cea339cfb81 ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20251020152704.4804-1-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>

Pull xfs fix from Carlos Maiolino:
"A single out-of-bounds fix, nothing special"

* tag 'xfs-fixes-6.18-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix out of bounds memory read error in symlink repair

Fully initialize *ctx, including the buf field which sha256_init()
doesn't initialize, to avoid a KMSAN warning when comparing *ctx to
orig_ctx. This KMSAN warning slipped in while KMSAN was not working
reliably due to a stackdepot bug, which has now been fixed.

Fixes: 6733968be7cb ("lib/crypto: tests: Add tests and benchmark for sha256_finup_2x()")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251121033431.34406-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

Depending on the particular CPU implementation a TLB shutdown may occur
if multiple matching entries are detected upon the execution of a TLBP
or the TLBWI/TLBWR instructions. Given that we don't know what entries
we have been handed we need to be very careful with the initial TLB
setup and avoid all these instructions.

Therefore read all the TLB entries one by one with the TLBR instruction,
bypassing the content addressing logic, and truncate any large pages in
place so as to avoid a case in the second step where an incoming entry
for a large page at a lower address overlaps with a replacement entry
chosen at another index. Then preinitialize the TLB using addresses
outside our usual unique range and avoiding clashes with any entries
received, before making the usual call to local_flush_tlb_all().

This fixes (at least) R4x00 cores if TLBP hits multiple matching TLB
entries (SGI IP22 PROM for examples sets up all TLBs to the same virtual
address).

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 35ad7e181541 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # Boston I6400, M5150 sim
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Pull kvm fixes from Paolo Bonzini:
"Arm:

- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code

- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running
without anything set until the first preemption of the vcpu

x86:

- Fix selftests failure on AMD, checking for an optimization that was
not happening anymore"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix redundant updates of LBR MSR intercepts
KVM: arm64: VHE: Compute fgt traps before activating them
KVM: arm64: Finalize ID registers only once per VM

Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.

Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:

- Fix tracing_mark_raw_write() to use per CPU buffer

The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.

The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.

- Stop the fortify string warning from writing into trace_marker_raw

After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:

struct {
struct trace_entry ent;
int id;
char buf[];
};

The size of this structure is reserved on the ring buffer with:

size = sizeof(*entry) + cnt;

Then it is copied from the buffer into the ring buffer with:

memcpy(&entry->id, buf, cnt);

This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.

The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.

Change the size function to:

size = struct_size(entry, buf, cnt - sizeof(entry->id));

And update the memcpy() to unsafe_memcpy()"

* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf

According to the PLIC specification[1], global interrupt sources are
assigned small unsigned integer identifiers beginning at the value 1.
An interrupt ID of 0 is reserved to mean "no interrupt".

The current plic_irq_resume() and plic_irq_suspend() functions incorrectly
start the loop from index 0, which accesses the register space for the
reserved interrupt ID 0.

Change the loop to start from index 1, skipping the reserved
interrupt ID 0 as per the PLIC specification.

This prevents potential undefined behavior when accessing the reserved
register space during suspend/resume cycles.

Fixes: e80f0b6a2cf3 ("irqchip/irq-sifive-plic: Add syscore callbacks for hibernation")
Co-developed-by: Jia Wang <wangjia@ultrarisc.com>
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Co-developed-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://github.com/riscv/riscv-plic-spec/releases/tag/1.0.0

Pull RTC updates from Alexandre Belloni:
"This cycle, we have a new RTC driver, for the SpacemiT P1. The optee
driver gets alarm support. We also get a fix for a race condition that
was fairly rare unless while stress testing the alarms.

Subsystem:
- Fix race when setting alarm
- Ensure alarm irq is enabled when UIE is enabled
- remove unneeded 'fast_io' parameter in regmap_config

New driver:
- SpacemiT P1 RTC

Drivers:
- efi: Remove wakeup functionality
- optee: add alarms support
- s3c: Drop support for S3C2410
- zynqmp: Restore alarm functionality after kexec transition"

* tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
rtc: interface: Ensure alarm irq is enabled when UIE is enabled
rtc: tps6586x: Fix initial enable_irq/disable_irq balance
rtc: cpcap: Fix initial enable_irq/disable_irq balance
rtc: isl12022: Fix initial enable_irq/disable_irq balance
rtc: interface: Fix long-standing race when setting alarm
rtc: pcf2127: fix watchdog interrupt mask on pcf2131
rtc: zynqmp: Restore alarm functionality after kexec transition
rtc: amlogic-a4: Optimize global variables
rtc: sd2405al: Add I2C address.
rtc: Kconfig: move symbols to proper section
rtc: optee: make optee_rtc_pm_ops static
rtc: optee: Fix error code in optee_rtc_read_alarm()
rtc: optee: fix error code in probe()
dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
rtc: spacemit: support the SpacemiT P1 RTC
rtc: optee: add alarm related rtc ops to optee rtc driver
rtc: optee: remove unnecessary memory operations
rtc: optee: fix memory leak on driver removal
rtc: x1205: Fix Xicor X1205 vendor prefix
dt-bindings: rtc: Fix Xicor X1205 vendor prefix
...

Pull SCSI fixes from James Bottomley:
"One target driver fix and one scsi-generic one. The latter is 10 lines
because the problem lock has to be dropped and re-taken around the
call causing the sleep in atomic"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: Do not sleep in atomic context
scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show()

xfs/286 produced this report on my test fleet:

==================================================================
BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110

Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184):
memcpy_orig+0x54/0x110
xrep_symlink_salvage_inline+0xb3/0xf0 [xfs]
xrep_symlink_salvage+0x100/0x110 [xfs]
xrep_symlink+0x2e/0x80 [xfs]
xrep_attempt+0x61/0x1f0 [xfs]
xfs_scrub_metadata+0x34f/0x5c0 [xfs]
xfs_ioc_scrubv_metadata+0x387/0x560 [xfs]
xfs_file_ioctl+0xe23/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53

kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128

allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago):
xfs_init_local_fork+0x79/0xe0 [xfs]
xfs_iformat_local+0xa4/0x170 [xfs]
xfs_iformat_data_fork+0x148/0x180 [xfs]
xfs_inode_from_disk+0x2cd/0x480 [xfs]
xfs_iget+0x450/0xd60 [xfs]
xfs_bulkstat_one_int+0x6b/0x510 [xfs]
xfs_bulkstat_iwalk+0x1e/0x30 [xfs]
xfs_iwalk_ag_recs+0xdf/0x150 [xfs]
xfs_iwalk_run_callbacks+0xb9/0x190 [xfs]
xfs_iwalk_ag+0x1dc/0x2f0 [xfs]
xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs]
xfs_iwalk+0xa4/0xd0 [xfs]
xfs_bulkstat+0xfa/0x170 [xfs]
xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs]
xfs_file_ioctl+0xbf2/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53

CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================

On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:

(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.

Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.

In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that.

Cc: stable@vger.kernel.org # v6.10
Fixes: 2651923d8d8db0 ("xfs: online repair of symbolic links")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>

On big endian arm kernels, the arm optimized Curve25519 code produces
incorrect outputs and fails the Curve25519 test. This has been true
ever since this code was added.

It seems that hardly anyone (or even no one?) actually uses big endian
arm kernels. But as long as they're ostensibly supported, we should
disable this code on them so that it's not accidentally used.

Note: for future-proofing, use !CPU_BIG_ENDIAN instead of
CPU_LITTLE_ENDIAN. Both of these are arch-specific options that could
get removed in the future if big endian support gets dropped.

Fixes: d8f1308a025f ("crypto: arm/curve25519 - wire up NEON implementation")
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251104054906.716914-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

In fact, it is a multi-threaded MIPS34Kc, not a single-threaded MIPS24Kc.

Fixes: 0ec488700972 ("mips: dts: Add EcoNet DTS with EN751221 and SmartFiber XP8421-B board")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The recent fix to properly initialize the tags of the huge zero folio
had an unfortunate not-so-subtle side effect: it caused the actual
*contents* of the huge zero folio to not be initialized at all when the
hardware didn't support the memory tagging.

The reason was the unfortunate semantics of tag_clear_highpage(): on
hardware that didn't do the tagging, it would silently just not do
anything at all. And since this is done only on arm64 with MTE support,
that basically meant most hardware.

It wasn't necessarily immediately obvious since the huge zero page isn't
necessarily very heavily used - or because it might already be zero
because all-zeroes is the most common pattern. But it ends up causing
random odd user space failures when you do hit it.

The unfortunate semantics have been around for a while, but became a
real bug only when we started actively using __GFP_ZEROTAGS in the
generic get_huge_zero_folio() function - before that, it had only ever
been used in code that checked that the hardware supported it.

Fix this by simply changing the semantics of tag_clear_highpage() to
return whether it actually successfully did something or not. While at
it, also make it initialize multiple pages in one go, since that's
actually what the only caller wants it to do and it simplifies the whole
logic.

Fixes: adfb6609c680 ("mm/huge_memory: initialise the tags of the huge zero folio")
Link: https://lore.kernel.org/all/20251117082023.90176-1-00107082@163.com/
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-and-tested-by: David Wang <00107082@163.com>
Reported-and-tested-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't update the LBR MSR intercept bitmaps if they're already up-to-date,
as unconditionally updating the intercepts forces KVM to recalculate the
MSR bitmaps for vmcb02 on every nested VMRUN. The redundant updates are
functionally okay; however, they neuter an optimization in Hyper-V
nested virtualization enlightenments and this manifests as a self-test
failure.

In particular, Hyper-V lets L1 mark "nested enlightenments" as clean, i.e.
tell KVM that no changes were made to the MSR bitmap since the last VMRUN.
The hyperv_svm_test KVM selftest intentionally changes the MSR bitmap
"without telling KVM about it" to verify that KVM honors the clean hint,
correctly fails because KVM notices the changed bitmap anyway:

==== Test Assertion Failure ====
x86/hyperv_svm_test.c:120: vmcb->control.exit_code == 0x081
pid=193558 tid=193558 errno=4 - Interrupted system call
1 0x0000000000411361: assert_on_unhandled_exception at processor.c:659
2 0x0000000000406186: _vcpu_run at kvm_util.c:1699
3 (inlined by) vcpu_run at kvm_util.c:1710
4 0x0000000000401f2a: main at hyperv_svm_test.c:175
5 0x000000000041d0d3: __libc_start_call_main at libc-start.o:?
6 0x000000000041f27c: __libc_start_main_impl at ??:?
7 0x00000000004021a0: _start at ??:?
vmcb->control.exit_code == SVM_EXIT_VMMCALL

Do *not* fix this by skipping svm_hv_vmcb_dirty_nested_enlightenments()
when svm_set_intercept_for_msr() performs a no-op change. changes to
the L0 MSR interception bitmap are only triggered by full CPUID updates
and MSR filter updates, both of which should be rare. Changing
svm_set_intercept_for_msr() risks hiding unintended pessimizations
like this one, and is actually more complex than this change.

Fixes: fbe5e5f030c2 ("KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()")
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251112013017.1836863-1-yosry.ahmed@linux.dev
[Rewritten commit message based on mailing list discussion. - Paolo]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix writing bpf_prog (infos|btfs)_cnt to data file, to not generate
invalid perf.data files in some corner cases.

- Fix 'perf top' segfault by ensuring libbfd is initialized. This is an
opt-in feature due to license incompatibilities.

- Fix segfault in 'perf lock' due to missing kernel map.

- Fix 'perf lock contention' test.

- Don't fail fast path detection if binutils-devel isn't available.

- Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason.

* tag 'perf-tools-fixes-for-v6.18-2-2025-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf libbfd: Ensure libbfd is initialized prior to use
perf test: Fix lock contention test
perf lock: Fix segfault due to missing kernel map
tools headers UAPI: Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason
perf build: Don't fail fast path feature detection when binutils-devel is not available
perf header: Write bpf_prog (infos|btfs)_cnt to data file

Pull Kbuild fixes from Nathan Chancellor:

- Fix UAPI types check in headers_check.pl

- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e

- Ignore fsync() error when output of gen_init_cpio is a pipe

- Several little build fixes for recent modules.builtin.modinfo series

* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check

The way tracing_mark_raw_write() records its data is that it has the
following structure:

struct {
struct trace_entry;
int id;
char buf[];
};

But memcpy(&entry->id, buf, size) triggers the following warning when the
size is greater than the id:

------------[ cut here ]------------
memcpy: detected field-spanning write (size 6) of single field "&entry->id" at kernel/trace/trace.c:7458 (size 4)
WARNING: CPU: 7 PID: 995 at kernel/trace/trace.c:7458 write_raw_marker_to_buffer.isra.0+0x1f9/0x2e0
Modules linked in:
CPU: 7 UID: 0 PID: 995 Comm: bash Not tainted 6.17.0-test-00007-g60b82183e78a-dirty #211 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:write_raw_marker_to_buffer.isra.0+0x1f9/0x2e0
Code: 04 00 75 a7 b9 04 00 00 00 48 89 de 48 89 04 24 48 c7 c2 e0 b1 d1 b2 48 c7 c7 40 b2 d1 b2 c6 05 2d 88 6a 04 01 e8 f7 e8 bd ff <0f> 0b 48 8b 04 24 e9 76 ff ff ff 49 8d 7c 24 04 49 8d 5c 24 08 48
RSP: 0018:ffff888104c3fc78 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffffffff6b363b4 RDI: 0000000000000001
RBP: ffff888100058a00 R08: ffffffffb041d459 R09: ffffed1020987f40
R10: 0000000000000007 R11: 0000000000000001 R12: ffff888100bb9010
R13: 0000000000000000 R14: 00000000000003e3 R15: ffff888134800000
FS: 00007fa61d286740(0000) GS:ffff888286cad000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000560d28d509f1 CR3: 00000001047a4006 CR4: 0000000000172ef0
Call Trace:
<TASK>
tracing_mark_raw_write+0x1fe/0x290
? __pfx_tracing_mark_raw_write+0x10/0x10
? security_file_permission+0x50/0xf0
? rw_verify_area+0x6f/0x4b0
vfs_write+0x1d8/0xdd0
? __pfx_vfs_write+0x10/0x10
? __pfx_css_rstat_updated+0x10/0x10
? count_memcg_events+0xd9/0x410
? fdget_pos+0x53/0x5e0
ksys_write+0x182/0x200
? __pfx_ksys_write+0x10/0x10
? do_user_addr_fault+0x4af/0xa30
do_syscall_64+0x63/0x350
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fa61d318687
Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: 002b:00007ffd87fe0120 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fa61d286740 RCX: 00007fa61d318687
RDX: 0000000000000006 RSI: 0000560d28d509f0 RDI: 0000000000000001
RBP: 0000560d28d509f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000006
R13: 00007fa61d4715c0 R14: 00007fa61d46ee80 R15: 0000000000000000
</TASK>
---[ end trace 0000000000000000 ]---

This is because fortify string sees that the size of entry->id is only 4
bytes, but it is writing more than that. But this is OK as the
dynamic_array is allocated to handle that copy.

The size allocated on the ring buffer was actually a bit too big:

size = sizeof(*entry) + cnt;

But cnt includes the 'id' and the buffer data, so adding cnt to the size
of *entry actually allocates too much on the ring buffer.

Change the allocation to:

size = struct_size(entry, buf, cnt - sizeof(entry->id));

and the memcpy() to unsafe_memcpy() with an added justification.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20251011112032.77be18e4@gandalf.local.home
Fixes: 64cf7d058a00 ("tracing: Have trace_marker use per-cpu data to read user space")
Reported-by: syzbot+9a2ede1643175f350105@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e973f5.050a0220.1186a4.0010.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

of_iomap() doesn't return error pointers, it returns NULL. Fix the error
checking to check for NULL pointers.

Fixes: 86cd4301c285 ("irqchip/aspeed-scu-ic: Refactor driver to support variant-based initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.

The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow

When setting a normal alarm, user-space is responsible for using
RTC_AIE_ON/RTC_AIE_OFF to control if alarm irq should be enabled.

But when RTC_UIE_ON is used, interrupts must be enabled so that the
requested irq events are generated.
When RTC_UIE_OFF is used, alarm irq is disabled if there are no other
alarms queued, so this commit brings symmetry to that.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-5-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull input fixes from Dmitry Torokhov:

- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for

- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver

- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board

- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues

* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003

sg_finish_rem_req() calls blk_rq_unmap_user(). The latter function may
sleep. Hence, call sg_finish_rem_req() with interrupts enabled instead
of disabled.

Reported-by: syzbot+c01f8e6e73f20459912e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-scsi/691560c4.a70a0220.3124cb.001a.GAE@google.com/
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org
Fixes: 97d27b0dd015 ("scsi: sg: close race condition in sg_remove_sfp_usercontext()")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251113181643.1108973-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

kmemleak occasionally reports leaking xfs_busy_extents structure
from xfs_scrub calls after running xfs/528 (but attributed to following
tests), which seems to be caused by not freeing the xfs_busy_extents
structure when tr.queued is 0 and xfs_trim_rtgroup_extents breaks out
of the main loop. Free the structure in this case.

Fixes: a3315d11305f ("xfs: use rtgroup busy extent list for FITRIM")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>

Commit 2f13daee2a72 ("lib/crypto/curve25519-hacl64: Disable KASAN with
clang-17 and older") inadvertently disabled KASAN in curve25519-hacl64.o
for GCC unconditionally because clang-min-version will always evaluate
to nothing for GCC. Add a check for CONFIG_CC_IS_CLANG to avoid applying
the workaround for GCC, which is only needed for clang-17 and older.

Cc: stable@vger.kernel.org
Fixes: 2f13daee2a72 ("lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251103-curve25519-hacl64-fix-kasan-workaround-v2-1-ab581cbd8035@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

Fix a regression that has caused accesses to the PCI MMIO window to
complete unclaimed in non-EVA configurations with the SOC-it family of
system controllers, preventing PCI devices from working that use MMIO.

In the non-EVA case PHYS_OFFSET is set to 0, meaning that PCI_BAR0 is
set with an empty mask (and PCI_HEAD4 matches addresses starting from 0
accordingly). Consequently all addresses are matched for incoming DMA
accesses from PCI. This seems to confuse the system controller's logic
and outgoing bus cycles targeting the PCI MMIO window seem not to make
it to the intended devices.

This happens as well when a wider mask is used with PCI_BAR0, such as
0x80000000 or 0xe0000000, that makes addresses match that overlap with
the PCI MMIO window, which starts at 0x10000000 in our configuration.

Set the mask in PCI_BAR0 to 0xf0000000 for non-EVA then, covering the
non-EVA maximum 256 MiB of RAM, which is what YAMON does and which used
to work correctly up to the offending commit. Set PCI_P2SCMSKL to match
PCI_BAR0 as required by the system controller's specification, and match
PCI_P2SCMAPL to PCI_HEAD4 for identity mapping.

Verified with:

Core board type/revision = 0x0d (Core74K) / 0x01
System controller/revision = MIPS SOC-it 101 OCP / 1.3 SDR-FW-4:1
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x1c
Processor ID/revision = 0x97 (MIPS 74Kf) / 0x4c

for non-EVA and with:

Core board type/revision = 0x0c (CoreFPGA-5) / 0x00
System controller/revision = MIPS ROC-it2 / 0.0 FW-1:1 (CLK_unknown) GIC
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0xa0 (MIPS interAptiv UP) / 0x20

for EVA/non-EVA, fixing:

defxx 0000:00:12.0: assign IRQ: got 10
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
0000:00:12.0: Could not read adapter factory MAC address!

vs:

defxx 0000:00:12.0: assign IRQ: got 10
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
0000:00:12.0: DEFPA at MMIO addr = 0x10142000, IRQ = 10, Hardware addr = 00-00-f8-xx-xx-xx
0000:00:12.0: registered as fddi0

for non-EVA and causing no change for EVA.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 422dd256642b ("MIPS: Malta: Allow PCI devices DMA to lower 2GB physical")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Pull vfs fixes from Christian Brauner:

- Fix unitialized variable in statmount_string()

- Fix hostfs mounting when passing host root during boot

- Fix dynamic lookup to fail on cell lookup failure

- Fix missing file type when reading bfs inodes from disk

- Enforce checking of sb_min_blocksize() calls and update all callers
accordingly

- Restore write access before closing files opened by open_exec() in
binfmt_misc

- Always freeze efivarfs during suspend/hibernate cycles

- Fix statmount()'s and listmount()'s grab_requested_mnt_ns() helper to
actually allow mount namespace file descriptor in addition to mount
namespace ids

- Fix tmpfs remount when noswap is specified

- Switch Landlock to iput_not_last() to remove false-positives from
might_sleep() annotations in iput()

- Remove dead node_to_mnt_ns() code

- Ensure that per-queue kobjects are successfully created

* tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
landlock: fix splats from iput() after it started calling might_sleep()
fs: add iput_not_last()
shmem: fix tmpfs reconfiguration (remount) when noswap is set
fs/namespace: correctly handle errors returned by grab_requested_mnt_ns
power: always freeze efivarfs
binfmt_misc: restore write access before closing files opened by open_exec()
block: add __must_check attribute to sb_min_blocksize()
virtio-fs: fix incorrect check for fsvq->kobj
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
mnt: Remove dead code which might prevent from building
bfs: Reconstruct file type when loading from disk
afs: Fix dynamic lookup to fail on cell lookup failure
hostfs: Fix only passing host root in boot stage with new mount
fs: Fix uninitialized 'offp' in statmount_string()

KVM/arm64 fixes for 6.18, take #3

- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code.

- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running without
anything set until the first preemption of the vcpu.

Pull misc fixes from Andrew Morton:
"7 hotfixes. 5 are cc:stable, 4 are against mm/

All are singletons - please see the respective changelogs for details"

* tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm, swap: fix potential UAF issue for VMA readahead
selftests/user_events: fix type cast for write_index packed member in perf_test
lib/test_kho: check if KHO is enabled
mm/huge_memory: fix folio split check for anon folios in swapcache
MAINTAINERS: update David Hildenbrand's email address
crash: fix crashkernel resource shrink
mm: fix MAX_FOLIO_ORDER on powerpc configs with hugetlb

Multiple threads may be creating and destroying BFD objects in
situations like `perf top`.

Without appropriate initialization crashes may occur during libbfd's
cache management.

BFD's locks require recursive mutexes, add support for these.

Committer testing:

This happens only when building with 'make BUILD_NONDISTRO=1' and having
the binutils-devel package (or equivalent) installed, i.e. linking with
binutils devel files, an opt-in perf build.

Before:

root@x1:~# perf top
perf: Segmentation fault
-------- backtrace --------
<SNIP multiple failed attempts at printing a backtrace>
root@x1:~#

After this patch it works as before.

Closes: https://lore.kernel.org/lkml/aQt66zhfxSA80xwt@gentoo.org/
Fixes: 95931d9a594dd0b5 ("perf libbfd: Move libbfd functionality to its own file")
Reported-by: Guilherme Amadio <amadio@gentoo.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

After commit 5ab23c7923a1 ("modpost: Create modalias for builtin
modules"), relocatable RISC-V kernels with CONFIG_KASAN=y start failing
when attempting to strip the module device table symbols:

riscv64-linux-objcopy: not stripping symbol `__mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table' because it is named in a relocation
make[4]: *** [scripts/Makefile.vmlinux:97: vmlinux] Error 1

The relocation appears to come from .LASANLOC5 in .data.rel.local:

$ llvm-objdump --disassemble-symbols=.LASANLOC5 --disassemble-all -r drivers/irqchip/irq-starfive-jh8100-intc.o

drivers/irqchip/irq-starfive-jh8100-intc.o: file format elf64-littleriscv

Disassembly of section .data.rel.local:

0000000000000180 <.LASANLOC5>:
...
1d0: 0000 unimp
00000000000001d0: R_RISCV_64 __mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table
...

This section appears to come from GCC for including additional
information about global variables that may be protected by KASAN.

There appears to be no way to opt out of the generation of these symbols
through either a flag or attribute. Attempting to remove '.LASANLOC*'
with '--strip-symbol' results in the same error as above because these
symbols may refer to (thus have relocation between) each other.

Avoid this build breakage by switching to '--strip-unneeded-symbol' for
removing __mod_device_table__ symbols, as it will only remove the symbol
when there is no relocation pointing to it. While this may result in a
little more bloat in the symbol table in certain configurations, it is
not as bad as outright build failures.

Fixes: 5ab23c7923a1 ("modpost: Create modalias for builtin modules")
Reported-by: Charles Mirabile <cmirabil@redhat.com>
Closes: https://lore.kernel.org/20251007011637.2512413-1-cmirabil@redhat.com/
Suggested-by: Alexey Gladkov <legion@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>

The fix to use a per CPU buffer to read user space tested only the writes
to trace_marker. But it appears that the selftests are missing tests to
the trace_maker_raw file. The trace_maker_raw file is used by applications
that writes data structures and not strings into the file, and the tools
read the raw ring buffer to process the structures it writes.

The fix that reads the per CPU buffers passes the new per CPU buffer to
the trace_marker file writes, but the update to the trace_marker_raw write
read the data from user space into the per CPU buffer, but then still used
then passed the user space address to the function that records the data.

Pass in the per CPU buffer and not the user space address.

TODO: Add a test to better test trace_marker_raw.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20251011035243.386098147@kernel.org
Fixes: 64cf7d058a00 ("tracing: Have trace_marker use per-cpu data to read user space")
Reported-by: syzbot+9a2ede1643175f350105@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e973f5.050a0220.1186a4.0010.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull btrfs fixes from David Sterba:
"Two short fixes that would be good to have before rc1"

* tag 'for-6.18-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix PAGE_SIZE format specifier in open_ctree()
btrfs: avoid potential out-of-bounds in btrfs_encode_fh()

Pull more x86 updates from Borislav Petkov:

- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C

- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm

- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant

- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware

- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups

- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors

- Other smaller cleanups and touchups all over the place

* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...

When a UTP error occurs in isolation, UFS is not currently recoverable.
This is because the UTP error is not considered fatal in the error
handling code, leading to either an I/O timeout or an OCS error.

Add the UTP error flag to INT_FATAL_ERRORS so the controller will be
reset in this situation.

sd 0:0:0:0: [sda] tag#38 UNKNOWN(0x2003) Result: hostbyte=0x07
driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#38 CDB: opcode=0x28 28 00 00 51 24 e2 00 00 08 00
I/O error, dev sda, sector 42542864 op 0x0:(READ) flags 0x80700 phys_seg
8 prio class 2
OCS error from controller = 9 for tag 39
pa_err[1] = 0x80000010 at 2667224756 us
pa_err: total cnt=2
dl_err[0] = 0x80000002 at 2667148060 us
dl_err[1] = 0x80002000 at 2667282844 us
No record of nl_err
No record of tl_err
No record of dme_err
No record of auto_hibern8_err
fatal_err[0] = 0x804 at 2667282836 us

---------------------------------------------------
REGISTER
---------------------------------------------------
NAME OFFSET VALUE
STD HCI SFR 0xfffffff0 0x0
AHIT 0x18 0x814
INTERRUPT STATUS 0x20 0x1000
INTERRUPT ENABLE 0x24 0x70ef5

[mkp: commit desc]

Signed-off-by: Hoyoung Seo <hy50.seo@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250930061428.617955-1-hy50.seo@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Interrupts are automatically enabled when requested, so we need to
initialize irq_en accordingly to avoid causing an unbalanced enable
warning.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-4-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull RISC-V fixes from Paul Walmsley:

- Correct the MIPS RISC-V/JEDEC vendor ID

- Fix the system shutdown behavior in the legacy case where
CONFIG_RISCV_SBI_V01 is set, but the firmware implementation
doesn't support the older v0.1 system shutdown method

- Align some tools/ macro definitions with the corresponding
kernel headers

* tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
tools: riscv: Fixed misalignment of CSR related definitions
riscv: sbi: Prefer SRST shutdown over legacy
riscv: Update MIPS vendor id to 0x127

And expand it to encompass all pressure pads.

Definition: "pressure pad" as used here as includes all touchpads that
use physical pressure to convert to click, without physical hinges. Also
called haptic touchpads in general parlance, Synaptics calls them
ForcePads.

Most (all?) pressure pads are currently advertised as
INPUT_PROP_BUTTONPAD. The suggestion to identify them as pressure pads
by defining the resolution on ABS_MT_PRESSURE has been in the docs since
commit 20ccc8dd38a3 ("Documentation: input: define
ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams") but few devices
provide this information.

In userspace it's thus impossible to determine whether a device is a
true pressure pad (pressure equals pressure) or a normal clickpad with
(pressure equals finger size).

Commit 7075ae4ac9db ("Input: add INPUT_PROP_HAPTIC_TOUCHPAD") introduces
INPUT_PROP_HAPTIC_TOUCHPAD but restricted it to those touchpads that
have support for userspace-controlled effects. Let's expand and rename
that definition to include all pressure pad touchpads since those that
do support FF effects can be identified by the presence of the
FF_HAPTIC bit.

This means:
- clickpad: INPUT_PROP_BUTTONPAD
- pressurepad: INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD
- pressurepad with configurable haptics:
INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD + FF_HAPTIC

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://patch.msgid.link/20251106114534.GA405512@tassie
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we
attempt to dereference it in tcm_loop_tpg_address_show() we will get a
segfault, see below for an example. So, check tl_hba->sh before
dereferencing it.

Unable to allocate struct scsi_host
BUG: kernel NULL pointer dereference, address: 0000000000000194
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024
RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop]
...
Call Trace:
<TASK>
configfs_read_iter+0x12d/0x1d0 [configfs]
vfs_read+0x1b5/0x300
ksys_read+0x6f/0xf0
...

Cc: stable@vger.kernel.org
Fixes: 2628b352c3d4 ("tcm_loop: Show address of tpg in configfs")
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Allen Pais <apais@linux.microsoft.com>
Link: https://patch.msgid.link/1762370746-6304-1-git-send-email-hamzamahfooz@linux.microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

xfs_select_open_zone_mru needs to pass XFS_ZONE_ALLOC_OK to
xfs_try_use_zone because we only want to tightly pack into zones of the
same or a compatible temperature instead of any available zone.

This got broken in commit 0301dae732a5 ("xfs: refactor hint based zone
allocation"), which failed to update this particular caller when
switching to an enum. xfs/638 sometimes, but not reliably fails due to
this change.

Fixes: 0301dae732a5 ("xfs: refactor hint based zone allocation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>