Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:

- rust binder fixes for reported issues

- mei device id addition

- mei driver fixes

- comedi bugfix

- most usb driver bugfixes

- fastrpc memory leak fix

All of these have been in linux-next for a while with no reported
issues"

* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning

Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:

- memory leak fixes

- error code fixes

- proper protocol fixes

All of these have been in linux-next for almost 2 weeks now with no
reported issues"

* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes

The early error path in hdm_probe() can jump to err_free_mdev before
&mdev->dev has been initialized with device_initialize(). Calling
put_device(&mdev->dev) there triggers a device core WARN and ends up
invoking kref_put(&kobj->kref, kobject_release) on an uninitialized
kobject.

In this path the private struct was only kmalloc'ed and the intended
release is effectively kfree(mdev) anyway, so free it directly instead
of calling put_device() on an uninitialized device.

This removes the WARNING and fixes the pre-initialization error path.

Fixes: 97a6f772f36b ("drivers: most: add USB adapter driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Victoria Votokina <Victoria.Votokina@kaspersky.com>
Link: https://patch.msgid.link/20251010105241.4087114-3-Victoria.Votokina@kaspersky.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:

- sh-sci serial driver fixes

- 8250_dw and _mtk driver fixes

- sc16is7xx driver bugfix

- new 8250_exar device ids added

All of these have been in linux-next this past week with no reported
issues"

* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling

The fmh_gpib driver contains a device reference count leak in
fmh_gpib_attach_impl() where driver_find_device() increases the
reference count of the device by get_device() when matching but this
reference is not properly decreased. Add put_device() in
fmh_gpib_detach(), which ensures that the reference count of the
device is correctly managed.

Found by code review.

Cc: stable <stable@kernel.org>
Fixes: 8e4841a0888c ("staging: gpib: Add Frank Mori Hess FPGA PCI GPIB driver")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hdm_disconnect() calls most_deregister_interface(), which eventually
unregisters the MOST interface device with device_unregister(iface->dev).
If that drops the last reference, the device core may call release_mdev()
immediately while hdm_disconnect() is still executing.

The old code also freed several mdev-owned allocations in
hdm_disconnect() and then performed additional put_device() calls.
Depending on refcount order, this could lead to use-after-free or
double-free when release_mdev() ran (or when unregister paths also
performed puts).

Fix by moving the frees of mdev-owned allocations into release_mdev(),
so they happen exactly once when the device is truly released, and by
dropping the extra put_device() calls in hdm_disconnect() that are
redundant after device_unregister() and most_deregister_interface().

This addresses the KASAN slab-use-after-free reported by syzbot in
hdm_disconnect(). See report and stack traces in the bug link below.

Reported-by: syzbot+916742d5d24f6c254761@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://syzkaller.appspot.com/bug?extid=916742d5d24f6c254761
Fixes: 97a6f772f36b ("drivers: most: add USB adapter driver")
Signed-off-by: Victoria Votokina <Victoria.Votokina@kaspersky.com>
Link: https://patch.msgid.link/20251010105241.4087114-2-Victoria.Votokina@kaspersky.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:

- new option serial driver device ids added

- dt bindings fixes for numerous platforms

- xhci bugfixes for many reported regressions

- usbio dependency bugfix

- dwc3 driver fix

- raw-gadget bugfix

All of these have been in linux-next this week with no reported issues"

* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp

Some MediaTek SoCs got a gated UART baud clock, which currently gets
disabled as the clk subsystem believes it would be unused. This results in
the uart freezing right after "clk: Disabling unused clocks" on those
platforms.

Request the baud clock to be prepared and enabled during probe, and to
restore run-time power management capabilities to what it was before commit
e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and clock
management") disable and unprepare the baud clock when suspending the UART,
prepare and enable it again when resuming it.

Fixes: e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and clock management")
Fixes: b6c7ff2693ddc ("serial: 8250_mtk: Simplify clock sequencing and runtime PM")
Cc: stable <stable@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/de5197ccc31e1dab0965cabcc11ca92e67246cf6.1758058441.git.daniel@makrotopia.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the ATN (Attention) line is asserted during a read we get a
NIUSB_ATN_STATE_ERROR during a read. For the controller to send a
device clear it asserts ATN. Normally this is an error but in the case
of a device clear it should be regarded as an interrupt.

Return -EINTR when the Device Clear Active State (DCAS) is entered
else signal an error with dev_dbg with status instead of just dev_err.

Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are no scenarios where a weak increment is invalid on binder_node.
The only possible case where it could be invalid is if the kernel
delivers BR_DECREFS to the process that owns the node, and then
increments the weak refcount again, effectively "reviving" a dead node.

However, that is not possible: when the BR_DECREFS command is delivered,
the kernel removes and frees the binder_node. The fact that you were
able to call binder_inc_node_nilocked() implies that the node is not yet
destroyed, which implies that BR_DECREFS has not been delivered to
userspace, so incrementing the weak refcount is valid.

Note that it's currently possible to trigger this condition if the owner
calls BINDER_THREAD_EXIT while node->has_weak_ref is true. This causes
BC_INCREFS on binder_ref instances to fail when they should not.

Cc: stable@vger.kernel.org
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Reported-by: Yu-Ting Tseng <yutingtseng@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251015-binder-weak-inc-v1-1-7914b092c371@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull x86 fixes from Borislav Petkov:

- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build

- Make sure a Retbleed mitigation message is printed only when
necessary

- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed

- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot

* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode

Johan writes:

USB serial device ids for 6.18-rc3

Here are some new modem device ids.

All have been in linux-next with no reported issues.

* tag 'usb-serial-6.18-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
USB: serial: option: add UNISOC UIS7720

Check the return value of reset_control_deassert() in the probe
function to prevent continuing probe when reset deassertion fails.

Previously, reset_control_deassert() was called without checking its
return value, which could lead to probe continuing even when the
device reset wasn't properly deasserted.

The fix checks the return value and returns an error with dev_err_probe()
if reset deassertion fails, providing better error handling and
diagnostics.

Fixes: acbdad8dd1ab ("serial: 8250_dw: simplify optional reset handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251019095131.252848-1-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver was not sending device clear or trigger events when the
board entered the DCAS or DTAS state respectively in device mode.

DCAS is the Device Clear Active State which is entered on receiving a
selective device clear message (SDC) or universal device clear message
(DCL) from the controller in charge.

DTAS is the Device Trigger Active State which is entered on receiving
a group execute trigger (GET) message from the controller.

In order for an application, implementing a particular device, to
detect when one of these states is entered the driver needs to send
the appropriate event.

Send the appropriate gpib_event when DCAS or DTAS is set in the
reported status word. This sets the DCAS or DTAS bits in the board's
status word which can be monitored by the application.

Fixes: 4e127de14fa7 ("staging: gpib: Add National Instruments USB GPIB driver")
Cc: stable <stable@kernel.org>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The mei_register() should move before the mei_start() for hook
on class device to work.
Same change was implemented in mei-me, missed from mei-txe.

Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251019073659.2646791-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull irq fixes from Borislav Petkov:

- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework

* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()

Clang, in particular, is not happy about dead code:

arch/x86/kernel/cpu/bugs.c:1830:20: error: unused function 'match_option' [-Werror,-Wunused-function]
1830 | static inline bool match_option(const char *arg, int arglen, const char *opt)
| ^~~~~~~~~~~~
1 error generated.

Remove a leftover from the previous cleanup.

Fixes: 02ac6cc8c5a1 ("x86/bugs: Simplify SSB cmdline parsing")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20251024125959.1526277-1-andriy.shevchenko%40linux.intel.com

When there is no port entry in the tcpci entry itself, the driver will
trigger an error message "OF: graph: no port node found in /...../typec" .

It is documented that the dts node should contain an connector entry
with ports and several port pointing to devices with usb-role-switch
property set. Only when those connector entry is missing, it should
check for port entries in the main node.

We switch the search order for looking after ports, which will avoid the
failure message while there are explicit connector entries.

Fixes: d56de8c9a17d ("usb: typec: tcpm: try to get role switch from tcpc fwnode")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for the Telit Cinterion FN920C04 module when operating in
ECM (Ethernet Control Model) mode. The following USB product IDs are
used by the module when AT#USBCFG is set to 3 or 7.

0x10A3: ECM + tty (NMEA) + tty (DUN) [+ tty (DIAG)]
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a3 Rev= 5.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=76e7cb38
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10A8: ECM + tty (DUN) + tty (AUX) [+ tty (DIAG)]
T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a8 Rev= 5.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=76e7cb38
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Adding these IDs allows the option driver to automatically create the
corresponding /dev/ttyUSB* ports under ECM mode.

Tested with FN920C04 under ECM configuration (USBCFG=3 and 7).

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

The SCIF instances on R-Car Gen5 have a single interrupt, just like on
other R-Car SoCs.

Fixes: 6ac1d60473727931 ("dt-bindings: serial: sh-sci: Document r8a78000 bindings")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/09bc9881b31bdb948ce8b69a2b5acf633f5505a4.1759920441.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EOI (End Or Identify) is a hardware line on the GPIB bus that can be
asserted with the last byte of a message to indicate the end of the
transfer to the receiving device.

In this driver, a write with send_eoi true is done in 3 parts:
Send first byte directly
Send remaining but 1 bytes using the fifo
Send the last byte directly with EOI asserted

The first byte in a write is always sent by writing to the tms9914
chip directly to setup for the subsequent fifo transfer. We were not
checking for a 1 byte write with send_eoi true resulting in EOI not
being asserted. Since the fifo transfer was not executed
(fifotransfersize == 0) the retval in the test after the fifo transfer
code was still 1 from the preceding direct write. This caused it to
return without executing the final direct write which would have sent
an unsollicited extra byte.

For a 2 byte message the first byte was sent directly. But since the
fifo transfer was not executed (fifotransfersize == 1) and the retval
in the test after the fifo transfer code was still 1 from the
preceding first byte write it returned before the final direct byte
write with send_eoi true. The second byte was then sent as a separate
1 byte write to complete the 2 byte write count again without EOI
being asserted as above.

Only send the first byte directly if more than 1 byte is to be
transferred with send_eoi true.

Also check for retval < 0 for the error return in case the fifo code
is not used (1 or 2 byte message with send_eoi true).

Fixes: 09a4655ee1eb ("staging: gpib: Add HP/Agilent/Keysight 8235xx PCI GPIB driver")
Cc: stable <stable@kernel.org>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi_buf_munge() function performs a modulo operation
`async->munge_chan %= async->cmd.chanlist_len` without first
checking if chanlist_len is zero. If a user program submits a command with
chanlist_len set to zero, this causes a divide-by-zero error when the device
processes data in the interrupt handler path.

Add a check for zero chanlist_len at the beginning of the
function, similar to the existing checks for !map and
CMDF_RAWDATA flag. When chanlist_len is zero, update
munge_count and return early, indicating the data was
handled without munging.

This prevents potential kernel panics from malformed user commands.

Reported-by: syzbot+f6c3c066162d2c43a66c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f6c3c066162d2c43a66c
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20250924102639.1256191-1-kartikey406@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull objtool fixes from Borislav Petkov:

- Fix x32 build due to wrong format specifier on that sub-arch

- Add one more Rust noreturn function to objtool's list

* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function

The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.

Fixes: bddd10c55407 ("genirq/manage: Rework enable_irq()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251023154901.1333755-4-ckeepax@opensource.cirrus.com

When retbleed mitigation is disabled, the kernel already prints an info
message that the system is vulnerable. Recent code restructuring also
inadvertently led to RETBLEED_INTEL_MSG being printed as an error, which is
unnecessary as retbleed mitigation was already explicitly disabled (by config
option, cmdline, etc.).

Qualify this print statement so the warning is not printed unless an actual
retbleed mitigation was selected and is being disabled due to incompatibility
with spectre_v2.

Fixes: e3b78a7ad5ea ("x86/bugs: Restructure retbleed mitigation")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220624
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251003171936.155391-1-david.kaplan@amd.com

The list of Huawei LTE modules needing the quirk fixing spurious wakeups
was missing the IDs of the Huawei ME906S module, therefore suspend did not
work.

Cc: stable <stable@kernel.org>
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20251020134304.35079-1-wse@tuxedocomputers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for Quectel RG255C devices to complement commit 5c964c8a97c1
("net: usb: qmi_wwan: add Quectel RG255C").
The composition is DM / NMEA / AT / QMI.

T: Bus=01 Lev=02 Prnt=99 Port=01 Cnt=02 Dev#=110 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0316 Rev= 5.15
S: Manufacturer=Quectel
S: Product=RG255C-GL
S: SerialNumber=xxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

Commit 43c51bb573aa ("sc16is7xx: make sure device is in suspend once
probed") permanently enabled access to the enhanced features in
sc16is7xx_probe(), and it is never disabled after that.

Therefore, remove re-enable of enhanced features in
sc16is7xx_set_baud(). This eliminates a potential useless read + write
cycle each time the baud rate is reconfigured.

Fixes: 43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed")
Cc: stable <stable@kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251006142002.177475-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance in the new mei late binding code
originating from the type parameter of mei_lb_push_payload():

drivers/misc/mei/mei_lb.c:211:18: error: incompatible function pointer types initializing 'int (*)(struct device *, u32, u32, const void *, size_t)' (aka 'int (*)(struct device *, unsigned int, unsigned int, const void *, unsigned long)') with an expression of type 'int (struct device *, enum intel_lb_type, u32, const void *, size_t)' (aka 'int (struct device *, enum intel_lb_type, unsigned int, const void *, unsigned long)') [-Werror,-Wincompatible-function-pointer-types-strict]
211 | .push_payload = mei_lb_push_payload,
| ^~~~~~~~~~~~~~~~~~~

While 'unsigned int' and 'enum intel_lb_type' are ABI compatible, hence
no regular warning from -Wincompatible-function-pointer-types, the
mismatch will trigger a kCFI violation when mei_lb_push_payload() is
called indirectly.

Update the type parameter of mei_lb_push_payload() to be 'u32' to match
the prototype in 'struct intel_lb_component_ops', clearing up the
warning and kCFI violation.

Fixes: 741eeabb7c78 ("mei: late_bind: add late binding component driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250920-drm-xe-fix-wifpts-v1-1-c89b5357c7ba@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull scheduler fix from Borislav Petkov:

- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash

* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled

Fix compilation failure when compiling the kernel with the x32 toolchain.

In file included from check.c:16:
check.c: In function ¡check_abs_references¢:
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:47:17: error: format ¡%lx¢ expects argument of type ¡long unsigned int¢, but argument 7 has type ¡u64¢ {aka ¡long
long unsigned int¢} [-Werror=format=]
47 | "%s%s%s: objtool" extra ": " format "\n", \
| ^~~~~~~~~~~~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:54:9: note: in expansion of macro ¡___WARN¢
54 | ___WARN(severity, "", format, ##__VA_ARGS__)
| ^~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:74:27: note: in expansion of macro ¡__WARN¢
74 | #define WARN(format, ...) __WARN(WARN_STR, format, ##__VA_ARGS__)
| ^~~~~~
check.c:4713:33: note: in expansion of macro ¡WARN¢
4713 | WARN("section %s has absolute relocation at offset 0x%lx",
| ^~~~

Fixes: 0d6e4563fc03 ("objtool: Add action to check for absence of absolute relocations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/1ac32fff-2e67-5155-f570-69aad5bf5412@redhat.com

The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.

Fixes: 1b7444446724 ("genirq/manage: Rework __disable_irq_nosync()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251023154901.1333755-3-ckeepax@opensource.cirrus.com

... to match AMD's statement here:

https://www.amd.com/en/resources/product-security/bulletin/amd-sb-7033.html

Fixes: 50cef76d5cb0 ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20251020144124.2930784-1-andrew.cooper3@citrix.com

Drop the check on the maximum transfer length in Raw Gadget for both
control and non-control transfers.

Limiting the transfer length causes a problem with emulating USB devices
whose full configuration descriptor exceeds PAGE_SIZE in length.

Overall, there does not appear to be any reason to enforce any kind of
transfer length limit on the Raw Gadget side for either control or
non-control transfers, so let's just drop the related check.

Cc: stable <stable@kernel.org>
Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://patch.msgid.link/a6024e8eab679043e9b8a5defdb41c4bda62f02b.1761085528.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for UNISOC (Spreadtrum) UIS7720 (A7720) module.

T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4064 Rev=04.04
S: Manufacturer=Unisoc-phone
S: Product=Unisoc-phone
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 9 Cfg#= 1 Atr=c0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0&1: RNDIS, 2: LOG, 3: DIAG, 4&5: AT Ports, 6&7: AT2 Ports, 8: ADB

Signed-off-by: Renjun Wang <renjunw0@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

The Advantech 2-port serial card with PCI vendor=0x13fe and device=0x0018
has a 'XR17V35X' chip installed on the circuit board. Therefore, this
driver can be used instead of theu outdated out-of-tree driver from the
manufacturer.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20250924134115.2667650-1-fe@dev.tdt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"

* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"

In fastrpc_map_lookup, dma_buf_get is called to obtain a reference to
the dma_buf for comparison purposes. However, this reference is never
released when the function returns, leading to a dma_buf memory leak.

Fix this by adding dma_buf_put before returning from the function,
ensuring that the temporarily acquired reference is properly released
regardless of whether a matching map is found.

Fixes: 9031626ade38 ("misc: fastrpc: Fix fastrpc_map_lookup operation")
Cc: stable@kernel.org
Signed-off-by: Junhao Xie <bigfoot@radxa.com>
Tested-by: Xilin Wu <sophon@radxa.com>
Rule: add
Link: https://lore.kernel.org/stable/48B368FB4C7007A7%2B20251017083906.3259343-1-bigfoot%40radxa.com
Link: https://patch.msgid.link/48B368FB4C7007A7+20251017083906.3259343-1-bigfoot@radxa.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull timer fix from Borislav Petkov:

- Do not create more than eight (max supported) AUX clocks sysfs
hierarchies

* tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix aux clocks sysfs initialization loop bound

Matteo reported hitting the assert_list_leaf_cfs_rq() warning from
enqueue_task_fair() post commit fe8d238e646e ("sched/fair: Propagate
load for throttled cfs_rq") which transitioned to using
cfs_rq_pelt_clock_throttled() check for leaf cfs_rq insertions in
propagate_entity_cfs_rq().

The "cfs_rq->pelt_clock_throttled" flag is used to indicate if the
hierarchy has its PELT frozen. If a cfs_rq's PELT is marked frozen, all
its descendants should have their PELT frozen too or weird things can
happen as a result of children accumulating PELT signals when the
parents have their PELT clock stopped.

Another side effect of this is the loss of integrity of the leaf cfs_rq
list. As debugged by Aaron, consider the following hierarchy:

root(#)
/ \
A(#) B(*)
|
C <--- new cgroup
|
D <--- new cgroup

# - Already on leaf cfs_rq list
* - Throttled with PELT frozen

The newly created cgroups don't have their "pelt_clock_throttled" signal
synced with cgroup B. Next, the following series of events occur:

1. online_fair_sched_group() for cgroup D will call
propagate_entity_cfs_rq(). (Same can happen if a throttled task is
moved to cgroup C and enqueue_task_fair() returns early.)

propagate_entity_cfs_rq() adds the cfs_rq of cgroup C to
"rq->tmp_alone_branch" since its PELT clock is not marked throttled
and cfs_rq of cgroup B is not on the list.

cfs_rq of cgroup B is skipped since its PELT is throttled.

root cfs_rq already exists on cfs_rq leading to
list_add_leaf_cfs_rq() returning early.

The cfs_rq of cgroup C is left dangling on the
"rq->tmp_alone_branch".

2. A new task wakes up on cgroup A. Since the whole hierarchy is already
on the leaf cfs_rq list, list_add_leaf_cfs_rq() keeps returning early
without any modifications to "rq->tmp_alone_branch".

The final assert_list_leaf_cfs_rq() in enqueue_task_fair() sees the
dangling reference to cgroup C's cfs_rq in "rq->tmp_alone_branch".

!!! Splat !!!

Syncing the "pelt_clock_throttled" indicator with parent cfs_rq is not
enough since the new cfs_rq is not yet enqueued on the hierarchy. A
dequeue on other subtree on the throttled hierarchy can freeze the PELT
clock for the parent hierarchy without setting the indicators for this
newly added cfs_rq which was never enqueued.

Since there are no tasks on the new hierarchy, start a cfs_rq on a
throttled hierarchy with its PELT clock throttled. The first enqueue, or
the distribution (whichever happens first) will unfreeze the PELT clock
and queue the cfs_rq on the leaf cfs_rq list.

While at it, add an assert_list_leaf_cfs_rq() in
propagate_entity_cfs_rq() to catch such cases in the future.

Closes: https://lore.kernel.org/lkml/58a587d694f33c2ea487c700b0d046fa@codethink.co.uk/
Fixes: e1fad12dcb66 ("sched/fair: Switch to task based throttle model")
Reported-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Suggested-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Aaron Lu <ziqianlu@bytedance.com>
Tested-by: Aaron Lu <ziqianlu@bytedance.com>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://patch.msgid.link/20251021053522.37583-1-kprateek.nayak@amd.com

Between Rust 1.79 and 1.86, under `CONFIG_RUST_KERNEL_DOCTESTS=y`,
`objtool` may report:

rust/doctests_kernel_generated.o: warning: objtool:
rust_doctest_kernel_alloc_kbox_rs_13() falls through to next
function rust_doctest_kernel_alloc_kvec_rs_0()

(as well as in rust_doctest_kernel_alloc_kvec_rs_0) due to calls to the
`noreturn` symbol:

core::option::expect_failed

from code added in commits 779db37373a3 ("rust: alloc: kvec: implement
AsPageIter for VVec") and 671618432f46 ("rust: alloc: kbox: implement
AsPageIter for VBox").

Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.

This can be reproduced as well in other versions by tweaking the code,
such as the latest stable Rust (1.90.0).

Stable does not have code that triggers this, but it could have it in
the future. Downstream forks could too. Thus tag it for backport.

See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.

Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later.
Link: https://patch.msgid.link/20251020020714.2511718-1-ojeda@kernel.org

The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.

Fixes: 5cd05f3e2315 ("genirq/chip: Rework irq_set_handler() variants")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251023154901.1333755-2-ckeepax@opensource.cirrus.com

The following NULL pointer dereference is encountered on mount of resctrl fs
after booting a system that supports assignable counters with the
"rdt=!mbmtotal,!mbmlocal" kernel parameters:

BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:mbm_cntr_get
Call Trace:
rdtgroup_assign_cntr_event
rdtgroup_assign_cntrs
rdt_get_tree

Specifying the kernel parameter "rdt=!mbmtotal,!mbmlocal" effectively disables
the legacy X86_FEATURE_CQM_MBM_TOTAL and X86_FEATURE_CQM_MBM_LOCAL features
and the MBM events they represent. This results in the per-domain MBM event
related data structures to not be allocated during early initialization.

resctrl fs initialization follows by implicitly enabling both MBM total and
local events on a system that supports assignable counters (mbm_event mode),
but this enabling occurs after the per-domain data structures have been
created.

After booting, resctrl fs assumes that an enabled event can access all its
state. This results in NULL pointer dereference when resctrl attempts to
access the un-allocated structures of an enabled event.

Remove the late MBM event enabling from resctrl fs.

This leaves a problem where the X86_FEATURE_CQM_MBM_TOTAL and
X86_FEATURE_CQM_MBM_LOCAL features may be disabled while assignable counter
(mbm_event) mode is enabled without any events to support. Switching between
the "default" and "mbm_event" mode without any events is not practical.

Create a dependency between the X86_FEATURE_{CQM_MBM_TOTAL,CQM_MBM_LOCAL} and
X86_FEATURE_ABMC (assignable counter) hardware features. An x86 system that
supports assignable counters now requires support of X86_FEATURE_CQM_MBM_TOTAL
or X86_FEATURE_CQM_MBM_LOCAL.

This ensures all needed MBM related data structures are created before use and
that it is only possible to switch between "default" and "mbm_event" mode when
the same events are available in both modes. This dependency does not exist in
the hardware but this usage of these feature settings work for known systems.

[ bp: Massage commit message. ]

Fixes: 13390861b426e ("x86,fs/resctrl: Detect Assignable Bandwidth Monitoring feature details")
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/a62e6ac063d0693475615edd213d5be5e55443e6.1760560934.git.babu.moger@amd.com

DbC is currently only enabled back if it's in configured state during
suspend.

If system is suspended after DbC is enabled, but before the device is
properly enumerated by the host, then DbC would not be enabled back in
resume.

Always enable DbC back in resume if it's suspended in enabled,
connected, or configured state

Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The receive error handling code is shared between RSCI and all other
SCIF port types, but the RSCI overrun_reg is specified as a memory
offset, while for other SCIF types it is an enum value used to index
into the sci_port_params->regs array, as mentioned above the
sci_serial_in() function.

For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call
inside the sci_handle_fifo_overrun() function to index outside the
bounds of the regs array, which currently has a size of 20, as specified
by SCI_NR_REGS.

Because of this, we end up accessing memory outside of RSCI's
rsci_port_params structure, which, when interpreted as a plat_sci_reg,
happens to have a non-zero size, causing the following WARN when
sci_serial_in() is called, as the accidental size does not match the
supported register sizes.

The existence of the overrun_reg needs to be checked because
SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not
present in the regs array.

Avoid calling sci_getreg() for port types which don't use standard
register handling.

Use the ops->read_reg() and ops->write_reg() functions to properly read
and write registers for RSCI, and change the type of the status variable
to accommodate the 32-bit CSR register.

sci_getreg() and sci_serial_in() are also called with overrun_reg in the
sci_mpxed_interrupt() interrupt handler, but that code path is not used
for RSCI, as it does not have a muxed interrupt.

------------[ cut here ]------------
Invalid register access
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac
Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT
Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT)
pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sci_serial_in+0x38/0xac
lr : sci_serial_in+0x38/0xac
sp : ffff800080003e80
x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d
x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80
x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000
x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a
x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720
x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48
x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48
x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80
Call trace:
sci_serial_in+0x38/0xac (P)
sci_handle_fifo_overrun.isra.0+0x70/0x134
sci_er_interrupt+0x50/0x39c
__handle_irq_event_percpu+0x48/0x140
handle_irq_event+0x44/0xb0
handle_fasteoi_irq+0xf4/0x1a0
handle_irq_desc+0x34/0x58
generic_handle_domain_irq+0x1c/0x28
gic_handle_irq+0x4c/0x140
call_on_irq_stack+0x30/0x48
do_interrupt_handler+0x80/0x84
el1_interrupt+0x34/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
default_idle_call+0x28/0x58 (P)
do_idle+0x1f8/0x250
cpu_startup_entry+0x34/0x3c
rest_init+0xd8/0xe0
console_on_rootfs+0x0/0x6c
__primary_switched+0x88/0x90
---[ end trace 0000000000000000 ]---

Cc: stable <stable@kernel.org>
Fixes: 0666e3fe95ab ("serial: sh-sci: Add support for RZ/T2H SCI")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://patch.msgid.link/20250923154707.1089900-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull irq fixes from Borislav Petkov:

- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior

- Fix a function's retval check in aspeed-scu-ic

* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check

This reverts commit 1a2b423be6a89dd07d5fc27ea042be68697a6a49 because we
got a regression report and need time to find out the details.

Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/29ec0082-4dd4-4120-acd2-44b35b4b9487@oss.qualcomm.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Add Wildcat Lake P device id.

Cc: stable@vger.kernel.org
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251016125912.2146136-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull driver core fixes from Danilo Krummrich:

- In Device::parent(), do not make any assumptions on the device
context of the parent device

- Check visibility before changing ownership of a sysfs attribute
group

- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()

- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs

- Do not warn about a pending fw_devlink sync state

* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending

The loop in tk_aux_sysfs_init() uses `i <= MAX_AUX_CLOCKS` as the
termination condition, which results in 9 iterations (i=0 to 8) when
MAX_AUX_CLOCKS is defined as 8. However, the kernel is designed to support
only up to 8 auxiliary clocks.

This off-by-one error causes the creation of a 9th sysfs entry that exceeds
the intended auxiliary clock range.

Fix the loop bound to use `i < MAX_AUX_CLOCKS` to ensure exactly 8
auxiliary clock entries are created, matching the design specification.

Fixes: 7b95663a3d96 ("timekeeping: Provide interface to control auxiliary clocks")
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/tencent_2376993D9FC06A3616A4F981B3DE1C599607@qq.com

DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint
if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for
incoming data are queued, but driver handles the event after it queued
the TRBs.

This is possible as xHCI DbC hardware may trigger spurious STALL transfer
events even if endpoint is empty. The STALL event contains a pointer
to the stalled TRB, and "remaining" untransferred data length.

As there are no TRBs queued yet the STALL event will just point to first
TRB position of the empty ring, with '0' bytes remaining untransferred.

DbC driver is polling for events, and may not handle the STALL event
before /dev/ttyDBC0 is opened and incoming data TRBs are queued.

The DbC event handler will now assume the first queued TRB (length 1024)
has stalled with '0' bytes remaining untransferred, and copies the data

This race situation can be practically mitigated by making sure the event
handler handles all pending transfer events when DbC reaches configured
state, and only then create dev/ttyDbC0, and start queueing transfers.
The event handler can this way detect the STALL events on empty rings
and discard them before any transfers are queued.

This does in practice solve the issue, but still leaves a small possible
gap for the race to trigger.
We still need a way to distinguish spurious STALLs on empty rings with '0'
bytes remaing, from actual STALL events with all bytes transmitted.

Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.

Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:

- Fix tracing_mark_raw_write() to use per CPU buffer

The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.

The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.

- Stop the fortify string warning from writing into trace_marker_raw

After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:

struct {
struct trace_entry ent;
int id;
char buf[];
};

The size of this structure is reserved on the ring buffer with:

size = sizeof(*entry) + cnt;

Then it is copied from the buffer into the ring buffer with:

memcpy(&entry->id, buf, cnt);

This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.

The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.

Change the size function to:

size = struct_size(entry, buf, cnt - sizeof(entry->id));

And update the memcpy() to unsafe_memcpy()"

* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf

According to the PLIC specification[1], global interrupt sources are
assigned small unsigned integer identifiers beginning at the value 1.
An interrupt ID of 0 is reserved to mean "no interrupt".

The current plic_irq_resume() and plic_irq_suspend() functions incorrectly
start the loop from index 0, which accesses the register space for the
reserved interrupt ID 0.

Change the loop to start from index 1, skipping the reserved
interrupt ID 0 as per the PLIC specification.

This prevents potential undefined behavior when accessing the reserved
register space during suspend/resume cycles.

Fixes: e80f0b6a2cf3 ("irqchip/irq-sifive-plic: Add syscore callbacks for hibernation")
Co-developed-by: Jia Wang <wangjia@ultrarisc.com>
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Co-developed-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://github.com/riscv/riscv-plic-spec/releases/tag/1.0.0

Pull RTC updates from Alexandre Belloni:
"This cycle, we have a new RTC driver, for the SpacemiT P1. The optee
driver gets alarm support. We also get a fix for a race condition that
was fairly rare unless while stress testing the alarms.

Subsystem:
- Fix race when setting alarm
- Ensure alarm irq is enabled when UIE is enabled
- remove unneeded 'fast_io' parameter in regmap_config

New driver:
- SpacemiT P1 RTC

Drivers:
- efi: Remove wakeup functionality
- optee: add alarms support
- s3c: Drop support for S3C2410
- zynqmp: Restore alarm functionality after kexec transition"

* tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
rtc: interface: Ensure alarm irq is enabled when UIE is enabled
rtc: tps6586x: Fix initial enable_irq/disable_irq balance
rtc: cpcap: Fix initial enable_irq/disable_irq balance
rtc: isl12022: Fix initial enable_irq/disable_irq balance
rtc: interface: Fix long-standing race when setting alarm
rtc: pcf2127: fix watchdog interrupt mask on pcf2131
rtc: zynqmp: Restore alarm functionality after kexec transition
rtc: amlogic-a4: Optimize global variables
rtc: sd2405al: Add I2C address.
rtc: Kconfig: move symbols to proper section
rtc: optee: make optee_rtc_pm_ops static
rtc: optee: Fix error code in optee_rtc_read_alarm()
rtc: optee: fix error code in probe()
dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
rtc: spacemit: support the SpacemiT P1 RTC
rtc: optee: add alarm related rtc ops to optee rtc driver
rtc: optee: remove unnecessary memory operations
rtc: optee: fix memory leak on driver removal
rtc: x1205: Fix Xicor X1205 vendor prefix
dt-bindings: rtc: Fix Xicor X1205 vendor prefix
...

Add a sentence to the driver description to clarify that the sbrmi-i2c
driver is intended to run on the BMC and not on the managed node. Add
platform dependencies accordingly.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/5c9f7100-0e59-4237-a252-43c3ee4802a2@amd.com
Link: https://patch.msgid.link/20251016155040.0e86c102@endymion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull firewire fixes from Takashi Sakamoto:
"A small collection of FireWire fixes. This includes corrections to
sparse and API documentation"

* tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: init_ohci1394_dma: add missing function parameter documentation
firewire: core: fix __must_hold() annotation