tjh.dev
commits
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.16-rc4. It resolves a build
error in the rtl8723bs driver for some versions of clang on arm64 when
checking the frame size with -Wframe-larger-than.
It has been in linux-next for a while now with no reported issues"
* tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()
Pull tty/serial driver fixes from Greg KH:
"Here are five small serial and tty and vt fixes for 6.16-rc4. Included
in here are:
- kerneldoc fixes for recent vt changes
- imx serial driver fix
- of_node sysfs fix for a regression
- vt missing notification fix
- 8250 dt bindings fix
All of these have been in linux-next for a while with no reported issues"
* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
serial: imx: Restore original RXTL for console to fix data loss
serial: core: restore of_node information in sysfs
vt: fix kernel-doc warnings in ucs_get_fallback()
vt: add missing notification when switching back to text mode
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with older versions of clang (15 through 17) show an
instance of -Wframe-larger-than (which breaks the build with
CONFIG_WERROR=y):
drivers/staging/rtl8723bs/core/rtw_security.c:1287:5: error: stack frame size (2208) exceeds limit (2048) in 'rtw_aes_decrypt' [-Werror,-Wframe-larger-than]
1287 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)
| ^
This comes from aes_decipher() being inlined in rtw_aes_decrypt().
Running the same build with CONFIG_FRAME_WARN=128 shows aes_cipher()
also uses a decent amount of stack, just under the limit of 2048:
drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1952) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than]
864 | static signed int aes_cipher(u8 *key, uint hdrlen,
| ^
-Rpass-analysis=stack-frame-layout only shows one large structure on the
stack, which is the ctx variable inlined from aes128k128d(). A good
number of the other variables come from the additional checks of
fortified string routines, which are present in memset(), which both
aes_cipher() and aes_decipher() use to initialize some temporary
buffers. In this case, since the size is known at compile time, these
additional checks should not result in any code generation changes but
allmodconfig has several sanitizers enabled, which may make it harder
for the compiler to eliminate the compile time checks and the variables
that come about from them.
The memset() calls are just initializing these buffers to zero, so use
'= {}' instead, which is used all over the kernel and does the exact
same thing as memset() without the fortify checks, which drops the stack
usage of these functions by a few hundred kilobytes.
drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1584) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than]
864 | static signed int aes_cipher(u8 *key, uint hdrlen,
| ^
drivers/staging/rtl8723bs/core/rtw_security.c:1271:5: warning: stack frame size (1456) exceeds limit (128) in 'rtw_aes_decrypt' [-Wframe-larger-than]
1271 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)
| ^
Cc: stable@vger.kernel.org
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250609-rtl8723bs-fix-clang-arm64-wflt-v1-1-e2accba43def@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull EDAC fix from Borislav Petkov:
- Consider secondary address mask registers in amd64_edac in order to
get the correct total memory size of the system
* tag 'edac_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull x86 fixes from Borislav Petkov:
- Make sure DR6 and DR7 are initialized to their architectural values
and not accidentally cleared, leading to misconfigurations
* tag 'x86_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Initialize DR7 by writing its architectural reset value
x86/traps: Initialize DR6 by writing its architectural reset value
Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based
SOCs has an Address Mask and a Secondary Address Mask register associated with
it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity
during init using these two registers.
Currently, the module primarily considers only the Address Mask register for
computing DIMM sizes. The Secondary Address Mask register is only considered
for odd CS. Additionally, if it has been considered, the Address Mask register
is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose
total capacity is a power of two (32GB, 64GB, etc), this is not an issue
since only the Address Mask register is used.
For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of
two (48GB, 96GB, etc), however, the Secondary Address Mask register is used
in conjunction with the Address Mask register. However, since the module only
considers either of the two registers for a CS, the size computed by the
module is incorrect. The Secondary Address Mask register is not considered for
even CS, and the Address Mask register is not considered for odd CS.
Introduce a new helper function so that both Address Mask and Secondary
Address Mask registers are considered, when valid, for computing DIMM sizes.
Furthermore, also rename some variables for greater clarity.
Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs")
Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt
Reported-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com
Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
introduced a regression on the i.MX6UL EVK board. The issue can be
reproduced with the following steps:
- Open vi on the board.
- Paste a text file (~150 characters).
- Save the file, then repeat the process.
- Compare the sha256sum of the saved files.
The checksums do not match due to missing characters or entire lines.
Fix this by restoring the RXTL value to 1 when the UART is used as a
console.
This ensures timely RX interrupts and reliable data reception in console
mode.
With this change, pasted content is saved correctly, and checksums are
always consistent.
Cc: stable <stable@kernel.org>
Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
* tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gendwarfksyms: Fix structure type overrides
kbuild: move warnings about linux/export.h from W=1 to W=2
Pull perf fix from Borislav Petkov:
- Make sure an AUX perf event is really disabled when it overruns
* tag 'perf_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix pending disable flow when the AUX ring buffer overruns
Initialize DR7 by writing its architectural reset value to always set
bit 10, which is reserved to '1', when "clearing" DR7 so as not to
trigger unanticipated behavior if said bit is ever unreserved, e.g. as
a feature enabling flag with inverted polarity.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-3-xin%40zytor.com
Since in v6.8-rc1, the of_node symlink under tty devices is
missing. This breaks any udev rules relying on this information.
Link the of_node information in the serial controller device with the
parent defined in the device tree. This will also apply to the serial
device which takes the serial controller as a parent device.
Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: stable@vger.kernel.org
Signed-off-by: Aidan Stewart <astewart@tektelic.com>
Link: https://lore.kernel.org/r/20250617164819.13912-1-astewart@tektelic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull smb client fixes from Steve French:
- SMB3.1.1 POSIX extensions fix for char remapping
- Fix for repeated directory listings when directory leases enabled
- deferred close handle reuse fix
* tag 'v6.16-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: improve directory cache reuse for readdir operations
smb: client: fix perf regression with deferred closes
smb: client: disable path remapping with POSIX extensions
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7b9
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7b9 ("gendwarfksyms: Add a kABI rule to override type strings")
Reported-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull locking fix from Borislav Petkov:
- Make sure the new futex phash is not copied during fork in order to
avoid a double-free
* tag 'locking_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Initialize futex_phash_new during fork().
If an AUX event overruns, the event core layer intends to disable the
event by setting the 'pending_disable' flag. Unfortunately, the event
is not actually disabled afterwards.
In commit:
ca6c21327c6a ("perf: Fix missing SIGTRAPs")
the 'pending_disable' flag was changed to a boolean. However, the
AUX event code was not updated accordingly. The flag ends up holding a
CPU number. If this number is zero, the flag is taken as false and the
IRQ work is never triggered.
Later, with commit:
2b84def990d3 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
a new IRQ work 'pending_disable_irq' was introduced to handle event
disabling. The AUX event path was not updated to kick off the work queue.
To fix this bug, when an AUX ring buffer overrun is detected, call
perf_event_disable_inatomic() to initiate the pending disable flow.
Also update the outdated comment for setting the flag, to reflect the
boolean values (0 or 1).
Fixes: 2b84def990d3 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
Fixes: ca6c21327c6a ("perf: Fix missing SIGTRAPs")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250625170737.2918295-1-leo.yan@arm.com
Initialize DR6 by writing its architectural reset value to avoid
incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads
to a false bus lock detected warning.
The Intel SDM says:
1) Certain debug exceptions may clear bits 0-3 of DR6.
2) BLD induced #DB clears DR6.BLD and any other debug exception
doesn't modify DR6.BLD.
3) RTM induced #DB clears DR6.RTM and any other debug exception
sets DR6.RTM.
To avoid confusion in identifying debug exceptions, debug handlers
should set DR6.BLD and DR6.RTM, and clear other DR6 bits before
returning.
The DR6 architectural reset value 0xFFFF0FF0, already defined as
macro DR6_RESERVED, satisfies these requirements, so just use it to
reinitialize DR6 whenever needed.
Since clear_all_debug_regs() no longer zeros all debug registers,
rename it to initialize_debug_regs() to better reflect its current
behavior.
Since debug_read_clear_dr6() no longer clears DR6, rename it to
debug_read_reset_dr6() to better reflect its current behavior.
Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock")
Reported-by: Sohil Mehta <sohil.mehta@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com
Pull i2c fixes from Wolfram Sang:
- subsystem: convert drivers to use recent callbacks of struct
i2c_algorithm A typical after-rc1 cleanup, which I couldn't send in
time for rc2
- tegra: fix YAML conversion of device tree bindings
- k1: re-add a check which got lost during upstreaming
* tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: k1: check for transfer error
i2c: use inclusive callbacks in struct i2c_algorithm
dt-bindings: i2c: nvidia,tegra20-i2c: Specify the required properties
Use the correct function parameter name in ucs_get_fallback() to prevent
kernel-doc warnings:
Warning: drivers/tty/vt/ucs.c:218 function parameter 'cp' not described in 'ucs_get_fallback'
Warning: drivers/tty/vt/ucs.c:218 Excess function parameter 'base' description in 'ucs_get_fallback'
Fixes: fe26933cf1e1 ("vt: add ucs_get_fallback()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nicolas Pitre <npitre@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-serial@vger.kernel.org
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>.
Link: https://lore.kernel.org/r/20250611020229.2650595-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull iommu fix from Joerg Roedel:
- Fix PTE size calculation for NVidia Tegra
* tag 'iommu-fixes-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra: Fix incorrect size calculation
Currently, cached directory contents were not reused across subsequent
'ls' operations because the cache validity check relied on comparing
the ctx pointer, which changes with each readdir invocation. As a
result, the cached dir entries was not marked as valid and the cache was
not utilized for subsequent 'ls' operations.
This change uses the file pointer, which remains consistent across all
readdir calls for a given directory instance, to associate and validate
the cache. As a result, cached directory contents can now be
correctly reused, improving performance for repeated directory listings.
Performance gains with local windows SMB server:
Without the patch and default actimeo=1:
1000 directory enumeration operations on dir with 10k files took 135.0s
With this patch and actimeo=0:
1000 directory enumeration operations on dir with 10k files took just 5.1s
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
This hides excessive warnings, as nobody builds with W=2.
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Fixes: 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Pull i2c fixes from Wolfram Sang:
- imx: fix SMBus protocol compliance during block read
- omap: fix error handling path in probe
- robotfuzz, tiny-usb: prevent zero-length reads
- x86, designware, amdisp: fix build error when modules are disabled
(agreed to go in via i2c)
- scx200_acb: fix build error because of missing HAS_IOPORT
* tag 'i2c-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: scx200_acb: depends on HAS_IOPORT
i2c: omap: Fix an error handling path in omap_i2c_probe()
platform/x86: Use i2c adapter name to fix build errors
i2c: amd-isp: Initialize unique adapter name
i2c: designware: Initialize adapter name only when not set
i2c: tiny-usb: disable zero-length read messages
i2c: robotfuzz-osif: disable zero-length read messages
i2c: imx: fix emulated smbus block read
During a hash resize operation the new private hash is stored in
mm_struct::futex_phash_new if the current hash can not be immediately
replaced.
The new hash must not be copied during fork() into the new task. Doing
so will lead to a double-free of the memory by the two tasks.
Initialize the mm_struct::futex_phash_new during fork().
Closes: https://lore.kernel.org/all/aFBQ8CBKmRzEqIfS@mozart.vkv.me/
Fixes: bd54df5ea7cad ("futex: Allow to resize the private local hash")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Link: https://lkml.kernel.org/r/20250623083408.jTiJiC6_@linutronix.de
Since smp_text_poke_single() does not expect there is another
text_poke request is queued, it can make text_poke_array not
sorted or cause a buffer overflow on the text_poke_array.vec[].
This will cause an Oops in int3 because of bsearch failing;
CPU 0 CPU 1 CPU 2
----- ----- -----
smp_text_poke_batch_add()
smp_text_poke_single() <<-- Adds out of order
<int3>
[Fails o find address
in text_poke_array ]
OOPS!
Or unhandled page fault because of a buffer overflow;
CPU 0 CPU 1
----- -----
smp_text_poke_batch_add() <<+
... |
smp_text_poke_batch_add() <<-- Adds TEXT_POKE_ARRAY_MAX times.
smp_text_poke_single() {
__smp_text_poke_batch_add() <<-- Adds entry at
TEXT_POKE_ARRAY_MAX + 1
smp_text_poke_batch_finish()
[Unhandled page fault because
text_poke_array.nr_entries is
overwritten]
BUG!
}
Use smp_text_poke_batch_add() instead of __smp_text_poke_batch_add()
so that it correctly flush the queue if needed.
Closes: https://lore.kernel.org/all/CA+G9fYsLu0roY3DV=tKyqP7FEKbOEETRvTDhnpPxJGbA=Cg+4w@mail.gmail.com/
Fixes: c8976ade0c1b ("x86/alternatives: Simplify smp_text_poke_single() by using tp_vec and existing APIs")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lkml.kernel.org/r/\ 175020512308.3582717.13631440385506146631.stgit@mhiramat.tok.corp.google.com
Pull x86 fixes from Borislav Petkov:
- Make sure the array tracking which kernel text positions need to be
alternatives-patched doesn't get mishandled by out-of-order
modifications, leading to it overflowing and causing page faults when
patching
- Avoid an infinite loop when early code does a ranged TLB invalidation
before the broadcast TLB invalidation count of how many pages it can
flush, has been read from CPUID
- Fix a CONFIG_MODULES typo
- Disable broadcast TLB invalidation when PTI is enabled to avoid an
overflow of the bitmap tracking dynamic ASIDs which need to be
flushed when the kernel switches between the user and kernel address
space
- Handle the case of a CPU going offline and thus reporting zeroes when
reading top-level events in the resctrl code
* tag 'x86_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Fix int3 handling failure from broken text_poke array
x86/mm: Fix early boot use of INVPLGB
x86/its: Fix an ifdef typo in its_alloc()
x86/mm: Disable INVLPGB when PTI is enabled
x86,fs/resctrl: Remove inappropriate references to cacheinfo in the resctrl subsystem
If spacemit_i2c_xfer_msg() times out waiting for a message transfer to
complete, or if the hardware reports an error, it returns a negative
error code (-ETIMEDOUT, -EAGAIN, -ENXIO. or -EIO).
The sole caller of spacemit_i2c_xfer_msg() is spacemit_i2c_xfer(),
which is the i2c_algorithm->xfer callback function. It currently
does not save the value returned by spacemit_i2c_xfer_msg().
The result is that transfer errors go unreported, and a caller
has no indication anything is wrong.
When this code was out for review, the return value *was* checked
in early versions. But for some reason, that assignment got dropped
between versions 5 and 6 of the series, perhaps related to reworking
the code to merge spacemit_i2c_xfer_core() into spacemit_i2c_xfer().
Simply assigning the value returned to "ret" fixes the problem.
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Troy Mitchell <troymitchell988@gmail.com>
Link: https://lore.kernel.org/r/20250616125137.1555453-1-elder@riscstar.com
Signed-off-by: Andi Shyti <andi@smida.it>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Programs using poll() on /dev/vcsa to be notified when VT changes occur
were missing one case: the switch from gfx to text mode.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
This driver uses a mixture of ways to get the size of a PTE,
tegra_smmu_set_pde() did it as sizeof(*pd) which became wrong when pd
switched to a struct tegra_pd.
Switch pd back to a u32* in tegra_smmu_set_pde() so the sizeof(*pd)
returns 4.
Fixes: 50568f87d1e2 ("iommu/terga: Do not use struct page as the handle for as->pd memory")
Reported-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Closes: https://lore.kernel.org/all/62e7f7fe-6200-4e4f-ad42-d58ad272baa6@tecnico.ulisboa.pt/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/0-v1-da7b8b3d57eb+ce-iommu_terga_sizeof_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Customer reported that one of their applications started failing to
open files with STATUS_INSUFFICIENT_RESOURCES due to NetApp server
hitting the maximum number of opens to same file that it would allow
for a single client connection.
It turned out the client was failing to reuse open handles with
deferred closes because matching ->f_flags directly without masking
off O_CREAT|O_EXCL|O_TRUNC bits first broke the comparision and then
client ended up with thousands of deferred closes to same file. Those
bits are already satisfied on the original open, so no need to check
them against existing open handles.
Reproducer:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#define NR_THREADS 4
#define NR_ITERATIONS 2500
#define TEST_FILE "/mnt/1/test/dir/foo"
static char buf[64];
static void *worker(void *arg)
{
int i, j;
int fd;
for (i = 0; i < NR_ITERATIONS; i++) {
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_APPEND, 0666);
for (j = 0; j < 16; j++)
write(fd, buf, sizeof(buf));
close(fd);
}
}
int main(int argc, char *argv[])
{
pthread_t t[NR_THREADS];
int fd;
int i;
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_TRUNC, 0666);
close(fd);
memset(buf, 'a', sizeof(buf));
for (i = 0; i < NR_THREADS; i++)
pthread_create(&t[i], NULL, worker, NULL);
for (i = 0; i < NR_THREADS; i++)
pthread_join(t[i], NULL);
return 0;
}
Before patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1391
After patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1
Cc: linux-cifs@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Cc: Pierguido Lambri <plambri@redhat.com>
Fixes: b8ea3b1ff544 ("smb: enable reuse of deferred file handles for write operations")
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull tracing fix from Steven Rostedt:
- Fix possible UAF on error path in filter_free_subsystem_filters()
When freeing a subsystem filter, the filter for the subsystem is
passed in to be freed and all the events within the subsystem will
have their filter freed too. In order to free without waiting for RCU
synchronization, list items are allocated to hold what is going to be
freed to free it via a call_rcu(). If the allocation of these items
fails, it will call the synchronization directly and free after that
(causing a bit of delay for the user).
The subsystem filter is first added to this list and then the filters
for all the events under the subsystem. The bug is if one of the
allocations of the list items for the event filters fail to allocate,
it jumps to the "free_now" label which will free the subsystem
filter, then all the items on the allocated list, and then the event
filters that were not added to the list yet. But because the
subsystem filter was added first, it gets freed twice.
The solution is to add the subsystem filter after the events, and
then if any of the allocations fail it will not try to free any of
them twice
* tag 'trace-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix filter logic error
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The INVLPGB instruction has limits on how many pages it can invalidate
at once. That limit is enumerated in CPUID, read by the kernel, and
stored in 'invpgb_count_max'. Ranged invalidation, like
invlpgb_kernel_range_flush() break up their invalidations so
that they do not exceed the limit.
However, early boot code currently attempts to do ranged
invalidation before populating 'invlpgb_count_max'. There is a
for loop which is basically:
for (...; addr < end; addr += invlpgb_count_max*PAGE_SIZE)
If invlpgb_kernel_range_flush is called before the kernel has read
the value of invlpgb_count_max from the hardware, the normally
bounded loop can become an infinite loop if invlpgb_count_max is
initialized to zero.
Fix that issue by initializing invlpgb_count_max to 1.
This way INVPLGB at early boot time will be a little bit slower
than normal (with initialized invplgb_count_max), and not an
instant hang at bootup time.
Fixes: b7aa05cbdc52 ("x86/mm: Add INVLPGB support code")
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250606171112.4013261-3-riel%40surriel.com
Pull irq fixes from Borislav Petkov:
- Fix missing prototypes warnings
- Properly initialize work context when allocating it
- Remove a method tracking when managed interrupts are suspended during
hotplug, in favor of the code using a IRQ disable depth tracking now,
and have interrupts get properly enabled again on restore
- Make sure multiple CPUs getting hotplugged don't cause wrong tracking
of the managed IRQ disable depth
* tag 'irq_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ath79-misc: Fix missing prototypes warnings
genirq/irq_sim: Initialize work context pointers properly
genirq/cpuhotplug: Restore affinity even for suspended IRQ
genirq/cpuhotplug: Rebalance managed interrupts across multi-CPU hotplug
i2c-host-fixes for v6.16-rc2
tegra: fix YAML conversion of device tree bindings
Pull io_uring fixes from Jens Axboe:
- Fix for a race between SQPOLL exit and fdinfo reading.
It's slim and I was only able to reproduce this with an artificial
delay in the kernel. Followup sparse fix as well to unify the access
to ->thread.
- Fix for multiple buffer peeking, avoiding truncation if possible.
- Run local task_work for IOPOLL reaping when the ring is exiting.
This currently isn't done due to an assumption that polled IO will
never need task_work, but a fix on the block side is going to change
that.
* tag 'io_uring-6.16-20250614' of git://git.kernel.dk/linux:
io_uring: run local task_work from ring exit IOPOLL reaping
io_uring/kbuf: don't truncate end buffer for multiple buffer peeks
io_uring: consistently use rcu semantics with sqpoll thread
io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()
Currently NVMe uring_cmd completions will complete locally, if they are
polled. This is done because those completions are always invoked from
task context. And while that is true, there's no guarantee that it's
invoked under the right ring context, or even task. If someone does
NVMe passthrough via multiple threads and with a limited number of
poll queues, then ringA may find completions from ringB. For that case,
completing the request may not be sound.
Always just punt the passthrough completions via task_work, which will
redirect the completion, if needed.
Cc: stable@vger.kernel.org
Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If SMB 3.1.1 POSIX Extensions are available and negotiated, the client
should be able to use all characters and not remap anything. Currently, the
user has to explicitly request this behavior by specifying the "nomapposix"
mount option.
Link: https://lore.kernel.org/4195bb677b33d680e77549890a4f4dd3b474ceaf.camel@rx2.rx-server.de
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull turbostat updates from Len Brown:
- Add initial DMR support, which required smarter RAPL probe
- Fix AMD MSR RAPL energy reporting
- Add RAPL power limit configuration output
- Minor fixes
* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.06.08
tools/power turbostat: Add initial support for BartlettLake
tools/power turbostat: Add initial support for DMR
tools/power turbostat: Dump RAPL sysfs info
tools/power turbostat: Avoid probing the same perf counters
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
tools/power turbostat: Clean up add perf/msr counter logic
tools/power turbostat: Introduce add_msr_counter()
tools/power turbostat: Remove add_msr_perf_counter_()
tools/power turbostat: Remove add_cstate_perf_counter_()
tools/power turbostat: Remove add_rapl_perf_counter_()
tools/power turbostat: Quit early for unsupported RAPL counters
tools/power turbostat: Always check rapl_joules flag
tools/power turbostat: Fix AMD package-energy reporting
tools/power turbostat: Fix RAPL_GFX_ALL typo
tools/power turbostat: Add Android support for MSR device handling
tools/power turbostat.8: pm_domain wording fix
tools/power turbostat.8: fix typo: idle_pct should be pct_idle
Pull LoongArch fixes from Huacai Chen:
- replace __ASSEMBLY__ with __ASSEMBLER__ in headers like others
- fix build warnings about export.h
- reserve the EFI memory map region for kdump
- handle __init vs inline mismatches
- fix some KVM bugs
* tag 'loongarch-fixes-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Disable updating of "num_cpu" and "feature"
LoongArch: KVM: Check validity of "num_cpu" from user space
LoongArch: KVM: Check interrupt route from physical CPU
LoongArch: KVM: Fix interrupt route update with EIOINTC
LoongArch: KVM: Add address alignment check for IOCSR emulation
LoongArch: KVM: Avoid overflow with array index
LoongArch: Handle KCOV __init vs inline mismatches
LoongArch: Reserve the EFI memory map region
LoongArch: Fix build warnings about export.h
LoongArch: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
If the processing of the tr->events loop fails, the filter that has been
added to filter_head will be released twice in free_filter_list(&head->rcu)
and __free_filter(filter).
After adding the filter of tr->events, add the filter to the filter_head
process to avoid triggering uaf.
Link: https://lore.kernel.org/tencent_4EF87A626D702F816CD0951CE956EC32CD0A@qq.com
Fixes: a9d0aab5eb33 ("tracing: Fix regression of filter waiting a long time on RCU synchronization")
Reported-by: syzbot+daba72c4af9915e9c894@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=daba72c4af9915e9c894
Tested-by: syzbot+daba72c4af9915e9c894@syzkaller.appspotmail.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
i2c-host fixes for v6.16-rc4
- imx: fix SMBus protocol compliance during block read
- omap: fix error handling path in probe
- robotfuzz, tiny-usb: prevent zero-length reads
- x86, designware, amdisp: fix build error when modules are
disabled
Commit a82b26451de1 ("x86/its: explicitly manage permissions for ITS
pages") reworks its_alloc() and introduces a typo in an ifdef
conditional, referring to CONFIG_MODULE instead of CONFIG_MODULES.
Fix this typo in its_alloc().
Fixes: a82b26451de1 ("x86/its: explicitly manage permissions for ITS pages")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250616100432.22941-1-lukas.bulwahn%40redhat.com
Pull perf fixes from Borislav Petkov:
- Avoid a crash on a heterogeneous machine where not all cores support
the same hw events features
- Avoid a deadlock when throttling events
- Document the perf event states more
- Make sure a number of perf paths switching off or rescheduling events
call perf_cgroup_event_disable()
- Make sure perf does task sampling before its userspace mapping is
torn down, and not after
* tag 'perf_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix crash in icl_update_topdown_event()
perf: Fix the throttle error of some clock events
perf: Add comment to enum perf_event_state
perf/core: Fix WARN in perf_cgroup_switch()
perf: Fix dangling cgroup pointer in cpuctx
perf: Fix cgroup state vs ERROR
perf: Fix sample vs do_exit()
ath79_misc_irq_init() was defined but unused since commit 51fa4f8912c0
("MIPS: ath79: drop legacy IRQ code"), so it's time to drop it.
The build also warns about a missing prototype of get_c0_perfcount_int().
Remove the stale leftover function and add the missing include.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/OSBPR01MB167032D2017645200787AAEBBC72A@OSBPR01MB1670.jpnprd01.prod.outlook.com
Convert the I2C subsystem to drop using the 'master_'-prefixed callbacks
in favor of the simplified ones. Fix alignment of '=' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Specify the properties which are essential and which are not for the
Tegra I2C driver to function correctly. This was not added correctly when
the TXT binding was converted to yaml. All the existing DT nodes have
these properties already and hence this does not break the ABI.
dmas and dma-names which were specified as a must in the TXT binding
is now made optional since the driver can work in PIO mode if dmas are
missing.
Fixes: f10a9b722f80 ("dt-bindings: i2c: tegra: Convert to json-schema”)
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi@smida.it>
Link: https://lore.kernel.org/r/20250603153022.39434-1-akhilrajeev@nvidia.com
Pull Rust fix from Miguel Ojeda:
- 'hrtimer': fix future compile error when the 'impl_has_hr_timer!'
macro starts to get called
* tag 'rust-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: Fix compile error in impl_has_hr_timer macro
In preparation for needing to shift NVMe passthrough to always use
task_work for polled IO completions, ensure that those are suitably
run at exit time. See commit:
9ce6c9875f3e ("nvme: always punt polled uring_cmd end_io work to task_work")
for details on why that is necessary.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stephen Rothwell reports htmldocs warning on ublk docs:
Documentation/block/ublk.rst:414: ERROR: Unexpected indentation. [docutils]
Fix the warning by separating sublists of auto buffer registration
fallback behavior from their appropriate parent list item.
Fixes: ff20c516485e ("ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250612132638.193de386@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250613023857.15971-1-bagasdotme@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
Pull smb client fixes from Steve French:
- Multichannel reconnect lock ordering deadlock fix
- Fix for regression in handling native Windows symlinks
- Three smbdirect fixes:
- oops in RDMA response processing
- smbdirect memcpy issue
- fix smbdirect regression with large writes (smbdirect test cases
now all passing)
- Fix for "FAILED_TO_PARSE" warning in trace-cmd report output
* tag 'v6.16-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix reading into an ITER_FOLIOQ from the smbdirect code
cifs: Fix the smbd_response slab to allow usercopy
smb: client: fix potential deadlock when reconnecting channels
smb: client: remove \t from TP_printk statements
smb: client: let smbd_post_send_iter() respect the peers max_send_size and transmit all data
smb: client: fix regression with native SMB symlinks
Property "num_cpu" and "feature" are read-only once eiointc is created,
which are set with KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL attr group before
device creation.
Attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS is to update register
and software state for migration and reset usage, property "num_cpu" and
"feature" can not be update again if it is created already.
Here discard write operation with property "num_cpu" and "feature" in
attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL.
Cc: stable@vger.kernel.org
Fixes: 1ad7efa552fd ("LoongArch: KVM: Add EIOINTC user mode read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If an error occurs after calling mux_state_select(), mux_state_deselect()
should be called as already done in the remove function.
Fixes: b6ef830c60b6 ("i2c: omap: Add support for setting mux")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/998542981b6d2435c057dd8b9fe71743927babab.1749913149.git.christophe.jaillet@wanadoo.fr
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.16-rc4. It resolves a build
error in the rtl8723bs driver for some versions of clang on arm64 when
checking the frame size with -Wframe-larger-than.
It has been in linux-next for a while now with no reported issues"
* tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()
Pull tty/serial driver fixes from Greg KH:
"Here are five small serial and tty and vt fixes for 6.16-rc4. Included
in here are:
- kerneldoc fixes for recent vt changes
- imx serial driver fix
- of_node sysfs fix for a regression
- vt missing notification fix
- 8250 dt bindings fix
All of these have been in linux-next for a while with no reported issues"
* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
serial: imx: Restore original RXTL for console to fix data loss
serial: core: restore of_node information in sysfs
vt: fix kernel-doc warnings in ucs_get_fallback()
vt: add missing notification when switching back to text mode
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with older versions of clang (15 through 17) show an
instance of -Wframe-larger-than (which breaks the build with
CONFIG_WERROR=y):
drivers/staging/rtl8723bs/core/rtw_security.c:1287:5: error: stack frame size (2208) exceeds limit (2048) in 'rtw_aes_decrypt' [-Werror,-Wframe-larger-than]
1287 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)
| ^
This comes from aes_decipher() being inlined in rtw_aes_decrypt().
Running the same build with CONFIG_FRAME_WARN=128 shows aes_cipher()
also uses a decent amount of stack, just under the limit of 2048:
drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1952) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than]
864 | static signed int aes_cipher(u8 *key, uint hdrlen,
| ^
-Rpass-analysis=stack-frame-layout only shows one large structure on the
stack, which is the ctx variable inlined from aes128k128d(). A good
number of the other variables come from the additional checks of
fortified string routines, which are present in memset(), which both
aes_cipher() and aes_decipher() use to initialize some temporary
buffers. In this case, since the size is known at compile time, these
additional checks should not result in any code generation changes but
allmodconfig has several sanitizers enabled, which may make it harder
for the compiler to eliminate the compile time checks and the variables
that come about from them.
The memset() calls are just initializing these buffers to zero, so use
'= {}' instead, which is used all over the kernel and does the exact
same thing as memset() without the fortify checks, which drops the stack
usage of these functions by a few hundred kilobytes.
drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1584) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than]
864 | static signed int aes_cipher(u8 *key, uint hdrlen,
| ^
drivers/staging/rtl8723bs/core/rtw_security.c:1271:5: warning: stack frame size (1456) exceeds limit (128) in 'rtw_aes_decrypt' [-Wframe-larger-than]
1271 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)
| ^
Cc: stable@vger.kernel.org
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250609-rtl8723bs-fix-clang-arm64-wflt-v1-1-e2accba43def@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull EDAC fix from Borislav Petkov:
- Consider secondary address mask registers in amd64_edac in order to
get the correct total memory size of the system
* tag 'edac_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull x86 fixes from Borislav Petkov:
- Make sure DR6 and DR7 are initialized to their architectural values
and not accidentally cleared, leading to misconfigurations
* tag 'x86_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Initialize DR7 by writing its architectural reset value
x86/traps: Initialize DR6 by writing its architectural reset value
Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based
SOCs has an Address Mask and a Secondary Address Mask register associated with
it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity
during init using these two registers.
Currently, the module primarily considers only the Address Mask register for
computing DIMM sizes. The Secondary Address Mask register is only considered
for odd CS. Additionally, if it has been considered, the Address Mask register
is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose
total capacity is a power of two (32GB, 64GB, etc), this is not an issue
since only the Address Mask register is used.
For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of
two (48GB, 96GB, etc), however, the Secondary Address Mask register is used
in conjunction with the Address Mask register. However, since the module only
considers either of the two registers for a CS, the size computed by the
module is incorrect. The Secondary Address Mask register is not considered for
even CS, and the Address Mask register is not considered for odd CS.
Introduce a new helper function so that both Address Mask and Secondary
Address Mask registers are considered, when valid, for computing DIMM sizes.
Furthermore, also rename some variables for greater clarity.
Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs")
Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt
Reported-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com
Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
introduced a regression on the i.MX6UL EVK board. The issue can be
reproduced with the following steps:
- Open vi on the board.
- Paste a text file (~150 characters).
- Save the file, then repeat the process.
- Compare the sha256sum of the saved files.
The checksums do not match due to missing characters or entire lines.
Fix this by restoring the RXTL value to 1 when the UART is used as a
console.
This ensures timely RX interrupts and reliable data reception in console
mode.
With this change, pasted content is saved correctly, and checksums are
always consistent.
Cc: stable <stable@kernel.org>
Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
* tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gendwarfksyms: Fix structure type overrides
kbuild: move warnings about linux/export.h from W=1 to W=2
Initialize DR7 by writing its architectural reset value to always set
bit 10, which is reserved to '1', when "clearing" DR7 so as not to
trigger unanticipated behavior if said bit is ever unreserved, e.g. as
a feature enabling flag with inverted polarity.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-3-xin%40zytor.com
Since in v6.8-rc1, the of_node symlink under tty devices is
missing. This breaks any udev rules relying on this information.
Link the of_node information in the serial controller device with the
parent defined in the device tree. This will also apply to the serial
device which takes the serial controller as a parent device.
Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: stable@vger.kernel.org
Signed-off-by: Aidan Stewart <astewart@tektelic.com>
Link: https://lore.kernel.org/r/20250617164819.13912-1-astewart@tektelic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull smb client fixes from Steve French:
- SMB3.1.1 POSIX extensions fix for char remapping
- Fix for repeated directory listings when directory leases enabled
- deferred close handle reuse fix
* tag 'v6.16-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: improve directory cache reuse for readdir operations
smb: client: fix perf regression with deferred closes
smb: client: disable path remapping with POSIX extensions
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7b9
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7b9 ("gendwarfksyms: Add a kABI rule to override type strings")
Reported-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If an AUX event overruns, the event core layer intends to disable the
event by setting the 'pending_disable' flag. Unfortunately, the event
is not actually disabled afterwards.
In commit:
ca6c21327c6a ("perf: Fix missing SIGTRAPs")
the 'pending_disable' flag was changed to a boolean. However, the
AUX event code was not updated accordingly. The flag ends up holding a
CPU number. If this number is zero, the flag is taken as false and the
IRQ work is never triggered.
Later, with commit:
2b84def990d3 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
a new IRQ work 'pending_disable_irq' was introduced to handle event
disabling. The AUX event path was not updated to kick off the work queue.
To fix this bug, when an AUX ring buffer overrun is detected, call
perf_event_disable_inatomic() to initiate the pending disable flow.
Also update the outdated comment for setting the flag, to reflect the
boolean values (0 or 1).
Fixes: 2b84def990d3 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
Fixes: ca6c21327c6a ("perf: Fix missing SIGTRAPs")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250625170737.2918295-1-leo.yan@arm.com
Initialize DR6 by writing its architectural reset value to avoid
incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads
to a false bus lock detected warning.
The Intel SDM says:
1) Certain debug exceptions may clear bits 0-3 of DR6.
2) BLD induced #DB clears DR6.BLD and any other debug exception
doesn't modify DR6.BLD.
3) RTM induced #DB clears DR6.RTM and any other debug exception
sets DR6.RTM.
To avoid confusion in identifying debug exceptions, debug handlers
should set DR6.BLD and DR6.RTM, and clear other DR6 bits before
returning.
The DR6 architectural reset value 0xFFFF0FF0, already defined as
macro DR6_RESERVED, satisfies these requirements, so just use it to
reinitialize DR6 whenever needed.
Since clear_all_debug_regs() no longer zeros all debug registers,
rename it to initialize_debug_regs() to better reflect its current
behavior.
Since debug_read_clear_dr6() no longer clears DR6, rename it to
debug_read_reset_dr6() to better reflect its current behavior.
Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock")
Reported-by: Sohil Mehta <sohil.mehta@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com
Pull i2c fixes from Wolfram Sang:
- subsystem: convert drivers to use recent callbacks of struct
i2c_algorithm A typical after-rc1 cleanup, which I couldn't send in
time for rc2
- tegra: fix YAML conversion of device tree bindings
- k1: re-add a check which got lost during upstreaming
* tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: k1: check for transfer error
i2c: use inclusive callbacks in struct i2c_algorithm
dt-bindings: i2c: nvidia,tegra20-i2c: Specify the required properties
Use the correct function parameter name in ucs_get_fallback() to prevent
kernel-doc warnings:
Warning: drivers/tty/vt/ucs.c:218 function parameter 'cp' not described in 'ucs_get_fallback'
Warning: drivers/tty/vt/ucs.c:218 Excess function parameter 'base' description in 'ucs_get_fallback'
Fixes: fe26933cf1e1 ("vt: add ucs_get_fallback()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nicolas Pitre <npitre@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-serial@vger.kernel.org
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>.
Link: https://lore.kernel.org/r/20250611020229.2650595-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, cached directory contents were not reused across subsequent
'ls' operations because the cache validity check relied on comparing
the ctx pointer, which changes with each readdir invocation. As a
result, the cached dir entries was not marked as valid and the cache was
not utilized for subsequent 'ls' operations.
This change uses the file pointer, which remains consistent across all
readdir calls for a given directory instance, to associate and validate
the cache. As a result, cached directory contents can now be
correctly reused, improving performance for repeated directory listings.
Performance gains with local windows SMB server:
Without the patch and default actimeo=1:
1000 directory enumeration operations on dir with 10k files took 135.0s
With this patch and actimeo=0:
1000 directory enumeration operations on dir with 10k files took just 5.1s
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
This hides excessive warnings, as nobody builds with W=2.
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Fixes: 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Pull i2c fixes from Wolfram Sang:
- imx: fix SMBus protocol compliance during block read
- omap: fix error handling path in probe
- robotfuzz, tiny-usb: prevent zero-length reads
- x86, designware, amdisp: fix build error when modules are disabled
(agreed to go in via i2c)
- scx200_acb: fix build error because of missing HAS_IOPORT
* tag 'i2c-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: scx200_acb: depends on HAS_IOPORT
i2c: omap: Fix an error handling path in omap_i2c_probe()
platform/x86: Use i2c adapter name to fix build errors
i2c: amd-isp: Initialize unique adapter name
i2c: designware: Initialize adapter name only when not set
i2c: tiny-usb: disable zero-length read messages
i2c: robotfuzz-osif: disable zero-length read messages
i2c: imx: fix emulated smbus block read
During a hash resize operation the new private hash is stored in
mm_struct::futex_phash_new if the current hash can not be immediately
replaced.
The new hash must not be copied during fork() into the new task. Doing
so will lead to a double-free of the memory by the two tasks.
Initialize the mm_struct::futex_phash_new during fork().
Closes: https://lore.kernel.org/all/aFBQ8CBKmRzEqIfS@mozart.vkv.me/
Fixes: bd54df5ea7cad ("futex: Allow to resize the private local hash")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Link: https://lkml.kernel.org/r/20250623083408.jTiJiC6_@linutronix.de
Since smp_text_poke_single() does not expect there is another
text_poke request is queued, it can make text_poke_array not
sorted or cause a buffer overflow on the text_poke_array.vec[].
This will cause an Oops in int3 because of bsearch failing;
CPU 0 CPU 1 CPU 2
----- ----- -----
smp_text_poke_batch_add()
smp_text_poke_single() <<-- Adds out of order
<int3>
[Fails o find address
in text_poke_array ]
OOPS!
Or unhandled page fault because of a buffer overflow;
CPU 0 CPU 1
----- -----
smp_text_poke_batch_add() <<+
... |
smp_text_poke_batch_add() <<-- Adds TEXT_POKE_ARRAY_MAX times.
smp_text_poke_single() {
__smp_text_poke_batch_add() <<-- Adds entry at
TEXT_POKE_ARRAY_MAX + 1
smp_text_poke_batch_finish()
[Unhandled page fault because
text_poke_array.nr_entries is
overwritten]
BUG!
}
Use smp_text_poke_batch_add() instead of __smp_text_poke_batch_add()
so that it correctly flush the queue if needed.
Closes: https://lore.kernel.org/all/CA+G9fYsLu0roY3DV=tKyqP7FEKbOEETRvTDhnpPxJGbA=Cg+4w@mail.gmail.com/
Fixes: c8976ade0c1b ("x86/alternatives: Simplify smp_text_poke_single() by using tp_vec and existing APIs")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lkml.kernel.org/r/\ 175020512308.3582717.13631440385506146631.stgit@mhiramat.tok.corp.google.com
Pull x86 fixes from Borislav Petkov:
- Make sure the array tracking which kernel text positions need to be
alternatives-patched doesn't get mishandled by out-of-order
modifications, leading to it overflowing and causing page faults when
patching
- Avoid an infinite loop when early code does a ranged TLB invalidation
before the broadcast TLB invalidation count of how many pages it can
flush, has been read from CPUID
- Fix a CONFIG_MODULES typo
- Disable broadcast TLB invalidation when PTI is enabled to avoid an
overflow of the bitmap tracking dynamic ASIDs which need to be
flushed when the kernel switches between the user and kernel address
space
- Handle the case of a CPU going offline and thus reporting zeroes when
reading top-level events in the resctrl code
* tag 'x86_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Fix int3 handling failure from broken text_poke array
x86/mm: Fix early boot use of INVPLGB
x86/its: Fix an ifdef typo in its_alloc()
x86/mm: Disable INVLPGB when PTI is enabled
x86,fs/resctrl: Remove inappropriate references to cacheinfo in the resctrl subsystem
If spacemit_i2c_xfer_msg() times out waiting for a message transfer to
complete, or if the hardware reports an error, it returns a negative
error code (-ETIMEDOUT, -EAGAIN, -ENXIO. or -EIO).
The sole caller of spacemit_i2c_xfer_msg() is spacemit_i2c_xfer(),
which is the i2c_algorithm->xfer callback function. It currently
does not save the value returned by spacemit_i2c_xfer_msg().
The result is that transfer errors go unreported, and a caller
has no indication anything is wrong.
When this code was out for review, the return value *was* checked
in early versions. But for some reason, that assignment got dropped
between versions 5 and 6 of the series, perhaps related to reworking
the code to merge spacemit_i2c_xfer_core() into spacemit_i2c_xfer().
Simply assigning the value returned to "ret" fixes the problem.
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Troy Mitchell <troymitchell988@gmail.com>
Link: https://lore.kernel.org/r/20250616125137.1555453-1-elder@riscstar.com
Signed-off-by: Andi Shyti <andi@smida.it>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Programs using poll() on /dev/vcsa to be notified when VT changes occur
were missing one case: the switch from gfx to text mode.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
This driver uses a mixture of ways to get the size of a PTE,
tegra_smmu_set_pde() did it as sizeof(*pd) which became wrong when pd
switched to a struct tegra_pd.
Switch pd back to a u32* in tegra_smmu_set_pde() so the sizeof(*pd)
returns 4.
Fixes: 50568f87d1e2 ("iommu/terga: Do not use struct page as the handle for as->pd memory")
Reported-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Closes: https://lore.kernel.org/all/62e7f7fe-6200-4e4f-ad42-d58ad272baa6@tecnico.ulisboa.pt/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/0-v1-da7b8b3d57eb+ce-iommu_terga_sizeof_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Customer reported that one of their applications started failing to
open files with STATUS_INSUFFICIENT_RESOURCES due to NetApp server
hitting the maximum number of opens to same file that it would allow
for a single client connection.
It turned out the client was failing to reuse open handles with
deferred closes because matching ->f_flags directly without masking
off O_CREAT|O_EXCL|O_TRUNC bits first broke the comparision and then
client ended up with thousands of deferred closes to same file. Those
bits are already satisfied on the original open, so no need to check
them against existing open handles.
Reproducer:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#define NR_THREADS 4
#define NR_ITERATIONS 2500
#define TEST_FILE "/mnt/1/test/dir/foo"
static char buf[64];
static void *worker(void *arg)
{
int i, j;
int fd;
for (i = 0; i < NR_ITERATIONS; i++) {
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_APPEND, 0666);
for (j = 0; j < 16; j++)
write(fd, buf, sizeof(buf));
close(fd);
}
}
int main(int argc, char *argv[])
{
pthread_t t[NR_THREADS];
int fd;
int i;
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_TRUNC, 0666);
close(fd);
memset(buf, 'a', sizeof(buf));
for (i = 0; i < NR_THREADS; i++)
pthread_create(&t[i], NULL, worker, NULL);
for (i = 0; i < NR_THREADS; i++)
pthread_join(t[i], NULL);
return 0;
}
Before patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1391
After patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1
Cc: linux-cifs@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Cc: Pierguido Lambri <plambri@redhat.com>
Fixes: b8ea3b1ff544 ("smb: enable reuse of deferred file handles for write operations")
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull tracing fix from Steven Rostedt:
- Fix possible UAF on error path in filter_free_subsystem_filters()
When freeing a subsystem filter, the filter for the subsystem is
passed in to be freed and all the events within the subsystem will
have their filter freed too. In order to free without waiting for RCU
synchronization, list items are allocated to hold what is going to be
freed to free it via a call_rcu(). If the allocation of these items
fails, it will call the synchronization directly and free after that
(causing a bit of delay for the user).
The subsystem filter is first added to this list and then the filters
for all the events under the subsystem. The bug is if one of the
allocations of the list items for the event filters fail to allocate,
it jumps to the "free_now" label which will free the subsystem
filter, then all the items on the allocated list, and then the event
filters that were not added to the list yet. But because the
subsystem filter was added first, it gets freed twice.
The solution is to add the subsystem filter after the events, and
then if any of the allocations fail it will not try to free any of
them twice
* tag 'trace-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix filter logic error
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The INVLPGB instruction has limits on how many pages it can invalidate
at once. That limit is enumerated in CPUID, read by the kernel, and
stored in 'invpgb_count_max'. Ranged invalidation, like
invlpgb_kernel_range_flush() break up their invalidations so
that they do not exceed the limit.
However, early boot code currently attempts to do ranged
invalidation before populating 'invlpgb_count_max'. There is a
for loop which is basically:
for (...; addr < end; addr += invlpgb_count_max*PAGE_SIZE)
If invlpgb_kernel_range_flush is called before the kernel has read
the value of invlpgb_count_max from the hardware, the normally
bounded loop can become an infinite loop if invlpgb_count_max is
initialized to zero.
Fix that issue by initializing invlpgb_count_max to 1.
This way INVPLGB at early boot time will be a little bit slower
than normal (with initialized invplgb_count_max), and not an
instant hang at bootup time.
Fixes: b7aa05cbdc52 ("x86/mm: Add INVLPGB support code")
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250606171112.4013261-3-riel%40surriel.com
Pull irq fixes from Borislav Petkov:
- Fix missing prototypes warnings
- Properly initialize work context when allocating it
- Remove a method tracking when managed interrupts are suspended during
hotplug, in favor of the code using a IRQ disable depth tracking now,
and have interrupts get properly enabled again on restore
- Make sure multiple CPUs getting hotplugged don't cause wrong tracking
of the managed IRQ disable depth
* tag 'irq_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ath79-misc: Fix missing prototypes warnings
genirq/irq_sim: Initialize work context pointers properly
genirq/cpuhotplug: Restore affinity even for suspended IRQ
genirq/cpuhotplug: Rebalance managed interrupts across multi-CPU hotplug
Pull io_uring fixes from Jens Axboe:
- Fix for a race between SQPOLL exit and fdinfo reading.
It's slim and I was only able to reproduce this with an artificial
delay in the kernel. Followup sparse fix as well to unify the access
to ->thread.
- Fix for multiple buffer peeking, avoiding truncation if possible.
- Run local task_work for IOPOLL reaping when the ring is exiting.
This currently isn't done due to an assumption that polled IO will
never need task_work, but a fix on the block side is going to change
that.
* tag 'io_uring-6.16-20250614' of git://git.kernel.dk/linux:
io_uring: run local task_work from ring exit IOPOLL reaping
io_uring/kbuf: don't truncate end buffer for multiple buffer peeks
io_uring: consistently use rcu semantics with sqpoll thread
io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()
Currently NVMe uring_cmd completions will complete locally, if they are
polled. This is done because those completions are always invoked from
task context. And while that is true, there's no guarantee that it's
invoked under the right ring context, or even task. If someone does
NVMe passthrough via multiple threads and with a limited number of
poll queues, then ringA may find completions from ringB. For that case,
completing the request may not be sound.
Always just punt the passthrough completions via task_work, which will
redirect the completion, if needed.
Cc: stable@vger.kernel.org
Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If SMB 3.1.1 POSIX Extensions are available and negotiated, the client
should be able to use all characters and not remap anything. Currently, the
user has to explicitly request this behavior by specifying the "nomapposix"
mount option.
Link: https://lore.kernel.org/4195bb677b33d680e77549890a4f4dd3b474ceaf.camel@rx2.rx-server.de
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull turbostat updates from Len Brown:
- Add initial DMR support, which required smarter RAPL probe
- Fix AMD MSR RAPL energy reporting
- Add RAPL power limit configuration output
- Minor fixes
* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.06.08
tools/power turbostat: Add initial support for BartlettLake
tools/power turbostat: Add initial support for DMR
tools/power turbostat: Dump RAPL sysfs info
tools/power turbostat: Avoid probing the same perf counters
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
tools/power turbostat: Clean up add perf/msr counter logic
tools/power turbostat: Introduce add_msr_counter()
tools/power turbostat: Remove add_msr_perf_counter_()
tools/power turbostat: Remove add_cstate_perf_counter_()
tools/power turbostat: Remove add_rapl_perf_counter_()
tools/power turbostat: Quit early for unsupported RAPL counters
tools/power turbostat: Always check rapl_joules flag
tools/power turbostat: Fix AMD package-energy reporting
tools/power turbostat: Fix RAPL_GFX_ALL typo
tools/power turbostat: Add Android support for MSR device handling
tools/power turbostat.8: pm_domain wording fix
tools/power turbostat.8: fix typo: idle_pct should be pct_idle
Pull LoongArch fixes from Huacai Chen:
- replace __ASSEMBLY__ with __ASSEMBLER__ in headers like others
- fix build warnings about export.h
- reserve the EFI memory map region for kdump
- handle __init vs inline mismatches
- fix some KVM bugs
* tag 'loongarch-fixes-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Disable updating of "num_cpu" and "feature"
LoongArch: KVM: Check validity of "num_cpu" from user space
LoongArch: KVM: Check interrupt route from physical CPU
LoongArch: KVM: Fix interrupt route update with EIOINTC
LoongArch: KVM: Add address alignment check for IOCSR emulation
LoongArch: KVM: Avoid overflow with array index
LoongArch: Handle KCOV __init vs inline mismatches
LoongArch: Reserve the EFI memory map region
LoongArch: Fix build warnings about export.h
LoongArch: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
If the processing of the tr->events loop fails, the filter that has been
added to filter_head will be released twice in free_filter_list(&head->rcu)
and __free_filter(filter).
After adding the filter of tr->events, add the filter to the filter_head
process to avoid triggering uaf.
Link: https://lore.kernel.org/tencent_4EF87A626D702F816CD0951CE956EC32CD0A@qq.com
Fixes: a9d0aab5eb33 ("tracing: Fix regression of filter waiting a long time on RCU synchronization")
Reported-by: syzbot+daba72c4af9915e9c894@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=daba72c4af9915e9c894
Tested-by: syzbot+daba72c4af9915e9c894@syzkaller.appspotmail.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit a82b26451de1 ("x86/its: explicitly manage permissions for ITS
pages") reworks its_alloc() and introduces a typo in an ifdef
conditional, referring to CONFIG_MODULE instead of CONFIG_MODULES.
Fix this typo in its_alloc().
Fixes: a82b26451de1 ("x86/its: explicitly manage permissions for ITS pages")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20250616100432.22941-1-lukas.bulwahn%40redhat.com
Pull perf fixes from Borislav Petkov:
- Avoid a crash on a heterogeneous machine where not all cores support
the same hw events features
- Avoid a deadlock when throttling events
- Document the perf event states more
- Make sure a number of perf paths switching off or rescheduling events
call perf_cgroup_event_disable()
- Make sure perf does task sampling before its userspace mapping is
torn down, and not after
* tag 'perf_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix crash in icl_update_topdown_event()
perf: Fix the throttle error of some clock events
perf: Add comment to enum perf_event_state
perf/core: Fix WARN in perf_cgroup_switch()
perf: Fix dangling cgroup pointer in cpuctx
perf: Fix cgroup state vs ERROR
perf: Fix sample vs do_exit()
ath79_misc_irq_init() was defined but unused since commit 51fa4f8912c0
("MIPS: ath79: drop legacy IRQ code"), so it's time to drop it.
The build also warns about a missing prototype of get_c0_perfcount_int().
Remove the stale leftover function and add the missing include.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/OSBPR01MB167032D2017645200787AAEBBC72A@OSBPR01MB1670.jpnprd01.prod.outlook.com
Specify the properties which are essential and which are not for the
Tegra I2C driver to function correctly. This was not added correctly when
the TXT binding was converted to yaml. All the existing DT nodes have
these properties already and hence this does not break the ABI.
dmas and dma-names which were specified as a must in the TXT binding
is now made optional since the driver can work in PIO mode if dmas are
missing.
Fixes: f10a9b722f80 ("dt-bindings: i2c: tegra: Convert to json-schema”)
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi@smida.it>
Link: https://lore.kernel.org/r/20250603153022.39434-1-akhilrajeev@nvidia.com
In preparation for needing to shift NVMe passthrough to always use
task_work for polled IO completions, ensure that those are suitably
run at exit time. See commit:
9ce6c9875f3e ("nvme: always punt polled uring_cmd end_io work to task_work")
for details on why that is necessary.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stephen Rothwell reports htmldocs warning on ublk docs:
Documentation/block/ublk.rst:414: ERROR: Unexpected indentation. [docutils]
Fix the warning by separating sublists of auto buffer registration
fallback behavior from their appropriate parent list item.
Fixes: ff20c516485e ("ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250612132638.193de386@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250613023857.15971-1-bagasdotme@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Pull smb client fixes from Steve French:
- Multichannel reconnect lock ordering deadlock fix
- Fix for regression in handling native Windows symlinks
- Three smbdirect fixes:
- oops in RDMA response processing
- smbdirect memcpy issue
- fix smbdirect regression with large writes (smbdirect test cases
now all passing)
- Fix for "FAILED_TO_PARSE" warning in trace-cmd report output
* tag 'v6.16-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix reading into an ITER_FOLIOQ from the smbdirect code
cifs: Fix the smbd_response slab to allow usercopy
smb: client: fix potential deadlock when reconnecting channels
smb: client: remove \t from TP_printk statements
smb: client: let smbd_post_send_iter() respect the peers max_send_size and transmit all data
smb: client: fix regression with native SMB symlinks
Property "num_cpu" and "feature" are read-only once eiointc is created,
which are set with KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL attr group before
device creation.
Attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS is to update register
and software state for migration and reset usage, property "num_cpu" and
"feature" can not be update again if it is created already.
Here discard write operation with property "num_cpu" and "feature" in
attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL.
Cc: stable@vger.kernel.org
Fixes: 1ad7efa552fd ("LoongArch: KVM: Add EIOINTC user mode read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If an error occurs after calling mux_state_select(), mux_state_deselect()
should be called as already done in the remove function.
Fixes: b6ef830c60b6 ("i2c: omap: Add support for setting mux")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/998542981b6d2435c057dd8b9fe71743927babab.1749913149.git.christophe.jaillet@wanadoo.fr