tjh.dev
commits
Pull turbostat updates from Len Brown:
- Add initial DMR support, which required smarter RAPL probe
- Fix AMD MSR RAPL energy reporting
- Add RAPL power limit configuration output
- Minor fixes
* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.06.08
tools/power turbostat: Add initial support for BartlettLake
tools/power turbostat: Add initial support for DMR
tools/power turbostat: Dump RAPL sysfs info
tools/power turbostat: Avoid probing the same perf counters
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
tools/power turbostat: Clean up add perf/msr counter logic
tools/power turbostat: Introduce add_msr_counter()
tools/power turbostat: Remove add_msr_perf_counter_()
tools/power turbostat: Remove add_cstate_perf_counter_()
tools/power turbostat: Remove add_rapl_perf_counter_()
tools/power turbostat: Quit early for unsupported RAPL counters
tools/power turbostat: Always check rapl_joules flag
tools/power turbostat: Fix AMD package-energy reporting
tools/power turbostat: Fix RAPL_GFX_ALL typo
tools/power turbostat: Add Android support for MSR device handling
tools/power turbostat.8: pm_domain wording fix
tools/power turbostat.8: fix typo: idle_pct should be pct_idle
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Add initial support for BartlettLake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull timer fix from Thomas Gleixner:
"Add the missing seq_file forward declaration in the timer namespace
header"
* tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timens: Add struct seq_file forward declaration
A lockdep fix removed two rdt_last_cmd_clear() calls that were used to
clear the last_cmd_status buffer but called without holding the required
rdtgroup_mutex.
The impacted resctrl commands are writing to the cpus or cpus_list files
and creating a new monitor or control group. With stale data in the
last_cmd_status buffer the impacted resctrl commands report the stale error
on success, or append its own failure message to the stale error on
failure.
Consequently, restore the rdt_last_cmd_clear() calls after acquiring
rdtgroup_mutex.
Fixes: c8eafe149530 ("x86/resctrl: Fix potential lockdep warning")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/all/20250603125828.1590067-1-zengheng4@huawei.com
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
Add initial support for DMR.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull x86 perf fix from Thomas Gleixner:
"A single fix for the x86 performance counters on Intel CPUs:
The MSR offset calculations for fixed performance counters are stored
at the wrong index in the configuration array causing the general
purpose counter MSR offset to be overwritten, so both the general
purpose and the fixed counters offsets are incorrect.
Correct the array index calculation to fix that"
* tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix incorrect MSR index calculations in intel_pmu_config_acr()
Add forward declaration of struct seq_file before using it in a
function prototype.
Fixes: 04a8682a71be ("fs/proc: Introduce /proc/pid/timens_offsets")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/all/aDlskzKIAULMlwPj@gondor.apana.org.au
io_bitmap_exit() is invoked from exit_thread() when a task exists or
when a fork fails. In the latter case the exit_thread() cleans up
resources which were allocated during fork().
io_bitmap_exit() invokes task_update_io_bitmap(), which in turn ends up
in tss_update_io_bitmap(). tss_update_io_bitmap() operates on the
current task. If current has TIF_IO_BITMAP set, but no bitmap installed,
tss_update_io_bitmap() crashes with a NULL pointer dereference.
There are two issues, which lead to that problem:
1) io_bitmap_exit() should not invoke task_update_io_bitmap() when
the task, which is cleaned up, is not the current task. That's a
clear indicator for a cleanup after a failed fork().
2) A task should not have TIF_IO_BITMAP set and neither a bitmap
installed nor IOPL emulation level 3 activated.
This happens when a kernel thread is created in the context of
a user space thread, which has TIF_IO_BITMAP set as the thread
flags are copied and the IO bitmap pointer is cleared.
Other than in the failed fork() case this has no impact because
kernel threads including IO workers never return to user space and
therefore never invoke tss_update_io_bitmap().
Cure this by adding the missing cleanups and checks:
1) Prevent io_bitmap_exit() to invoke task_update_io_bitmap() if
the to be cleaned up task is not the current task.
2) Clear TIF_IO_BITMAP in copy_thread() unconditionally. For user
space forks it is set later, when the IO bitmap is inherited in
io_bitmap_share().
For paranoia sake, add a warning into tss_update_io_bitmap() to catch
the case, when that code is invoked with inconsistent state.
Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped")
Reported-by: syzbot+e2b1803445d236442e54@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/87wmdceom2.ffs@tglx
Pull sh updates from John Paul Adrian Glaubitz:
- replace the __ASSEMBLY__ with __ASSEMBLER__ macro in all headers
since the latter is now defined automatically by both GCC and Clang
when compiling assembly code (Thomas Huth)
- set the default SPI mode for the ecovec24 board which became
necessary after a new mode member as added to the sh_msiof_spi_info
struct in cf9e4784f3bd ("spi: sh-msiof: Add slave mode support")
(Geert Uytterhoeven)
- remove unused variables in the kprobes code in
kprobe_exceptions_notify() (Mike Rapoport)
* tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
sh: ecovec24: Make SPI mode explicit
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
Enumeration constants read from a symbol reference file can incorrectly
affect new enumeration constants parsed from an actual input file.
Example:
$ cat test.c
enum { E_A, E_B, E_MAX };
struct bar { int mem[E_MAX]; };
int foo(struct bar *a) {}
__GENKSYMS_EXPORT_SYMBOL(foo);
$ cat test.c | ./scripts/genksyms/genksyms -T test.0.symtypes
#SYMVER foo 0x070d854d
$ cat test.0.symtypes
E#E_MAX 2
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
$ cat test.c | ./scripts/genksyms/genksyms -T test.1.symtypes -r test.0.symtypes
<stdin>:4: warning: foo: modversion changed because of changes in enum constant E_MAX
#SYMVER foo 0x9c9dfd81
$ cat test.1.symtypes
E#E_MAX ( 2 ) + 3
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
The __add_symbol() function includes logic to handle the incrementation of
enumeration values, but this code is also invoked when reading a reference
file. As a result, the variables last_enum_expr and enum_counter might be
incorrectly set after reading the reference file, which later affects
parsing of the actual input.
Fix the problem by splitting the logic for the incrementation of
enumeration values into a separate function process_enum() and call it from
__add_symbol() only when processing non-reference data.
Fixes: e37ddb825003 ("genksyms: Track changes to enum constants")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
for example:
intel-rapl:1: psys 28.0s:100W 976.0us:100W
intel-rapl:0: package-0 28.0s:57W,max:15W 2.4ms:57W
intel-rapl:0/intel-rapl:0:0: core disabled
intel-rapl:0/intel-rapl:0:1: uncore disabled
intel-rapl-mmio:0: package-0 28.0s:28W,max:15W 2.4ms:57W
[lenb: simplified format]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
squish me
Signed-off-by: Len Brown <len.brown@intel.com>
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
The MSR offset calculations in intel_pmu_config_acr() are buggy.
To calculate fixed counter MSR addresses in intel_pmu_config_acr(),
the HW counter index "idx" is subtracted by INTEL_PMC_IDX_FIXED.
This leads to the ACR mask value of fixed counters to be incorrectly
saved to the positions of GP counters in acr_cfg_b[], e.g.
For fixed counter 0, its ACR counter mask should be saved to
acr_cfg_b[32], but it's saved to acr_cfg_b[0] incorrectly.
Fix this issue.
[ mingo: Clarified & improved the changelog. ]
Fixes: ec980e4facef ("perf/x86/intel: Support auto counter reload")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250529080236.2552247-2-dapeng1.mi@linux.intel.com
Pull NFS clent updates from Anna Schumaker:
"New Features:
- Implement the Sunrpc rfc2203 rpcsec_gss sequence number cache
- Add support for FALLOC_FL_ZERO_RANGE on NFS v4.2
- Add a localio sysfs attribute
Stable Fixes:
- Fix double-unlock bug in nfs_return_empty_folio()
- Don't check for OPEN feature support in v4.1
- Always probe for LOCALIO support asynchronously
- Prevent hang on NFS mounts with xprtsec=[m]tls
Other Bugfixes:
- xattr handlers should check for absent nfs filehandles
- Fix setattr caching of TIME_[MODIFY|ACCESS]_SET when timestamps are
delegated
- Fix listxattr to return selinux security labels
- Connect to NFSv3 DS using TLS if MDS connection uses TLS
- Clear SB_RDONLY before getting a superblock, and ignore when
remounting
- Fix incorrect handling of NFS error codes in nfs4_do_mkdir()
- Various nfs_localio fixes from Neil Brown that include fixing an
rcu compilation error found by older gcc versions.
- Update stats on flexfiles pNFS DSes when receiving NFS4ERR_DELAY
Cleanups:
- Add a refcount tracker for struct net in the nfs_client
- Allow FREE_STATEID to clean up delegations
- Always set NLINK even if the server doesn't support it
- Cleanups to the NFS folio writeback code
- Remove dead code from xs_tcp_tls_setup_socket()"
* tag 'nfs-for-6.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (30 commits)
flexfiles/pNFS: update stats on NFS4ERR_DELAY for v4.1 DSes
nfs_localio: change nfsd_file_put_local() to take a pointer to __rcu pointer
nfs_localio: protect race between nfs_uuid_put() and nfs_close_local_fh()
nfs_localio: duplicate nfs_close_local_fh()
nfs_localio: simplify interface to nfsd for getting nfsd_file
nfs_localio: always hold nfsd net ref with nfsd_file ref
nfs_localio: use cmpxchg() to install new nfs_file_localio
SUNRPC: Remove dead code from xs_tcp_tls_setup_socket()
SUNRPC: Prevent hang on NFS mount with xprtsec=[m]tls
nfs: fix incorrect handling of large-number NFS errors in nfs4_do_mkdir()
nfs: ignore SB_RDONLY when remounting nfs
nfs: clear SB_RDONLY before getting superblock
NFS: always probe for LOCALIO support asynchronously
pnfs/flexfiles: connect to NFSv3 DS using TLS if MDS connection uses TLS
NFS: add localio to sysfs
nfs: use writeback_iter directly
nfs: refactor nfs_do_writepage
nfs: don't return AOP_WRITEPAGE_ACTIVATE from nfs_do_writepage
nfs: fold nfs_page_async_flush into nfs_do_writepage
NFSv4: Always set NLINK even if the server doesn't support it
...
The following trace events are not used and defining them just wastes
memory:
x86_fpu_before_restore
x86_fpu_after_restore
x86_fpu_init_state
Simply remove them.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home # background
Link: https://lore.kernel.org/r/20250529131024.7c2ef96f@gandalf.local.home # x86 submission
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
kbuild reports the following warning:
arch/sh/kernel/kprobes.c: In function 'kprobe_exceptions_notify':
>> arch/sh/kernel/kprobes.c:412:24: warning: variable 'p' set but not used [-Wunused-but-set-variable]
412 | struct kprobe *p = NULL;
| ^
The variable 'p' is indeed unused since the commit fa5a24b16f94
("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Remove that variable along with 'kprobe_opcode_t *addr' which also
becomes unused after 'p' is removed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505151341.EuRFR22l-lkp@intel.com/
Fixes: fa5a24b16f94 ("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN),
which behaves equivalently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
Zenghui reports that since 1396e89e09f0 ("genirq/msi: Move prepare() call
to per-device allocation"), his Multi-MSI capable device isn't working
anymore.
This is a consequence of 15c72f824b32 ("PCI/MSI: Add support for per device
MSI[X] domains"), which always creates a MSI domain of size 1, even in the
presence of Multi-MSI.
While this was somehow working until then, moving the .prepare() call ends
up sizing the ITS table with a tiny value for this device, and making the
endpoint driver unhappy.
Instead, always create the domain and call the .prepare() helper with the
maximum expected size.
Fixes: 1396e89e09f0 ("genirq/msi: Move prepare() call to per-device allocation")
Fixes: 15c72f824b32 ("PCI/MSI: Add support for per device MSI[X] domains")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/all/20250603141801.915305-1-maz@kernel.org
Closes: https://lore.kernel.org/r/0b1d7aec-1eac-a9cd-502a-339e216e08a1@huawei.com
Pull AMD SEV update from Borislav Petkov:
"Add a virtual TPM driver glue which allows a guest kernel to talk to a
TPM device emulated by a Secure VM Service Module (SVSM) - a helper
module of sorts which runs at a different privilege level in the
SEV-SNP VM stack.
The intent being that a TPM device is emulated by a trusted entity and
not by the untrusted host which is the default assumption in the
confidential computing scenarios"
* tag 'x86_sev_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Register tpm-svsm platform device
tpm: Add SNP SVSM vTPM driver
svsm: Add header with SVSM_VTPM_CMD helpers
x86/sev: Add SVSM vTPM probe/send_command functions
Pull smb client updates from Steve French:
- multichannel fixes (mostly reconnect related), and clarification of
locking documentation
- automount null pointer check fix
- fixes to add support for ParentLeaseKey
- minor cleanup
- smb1/cifs fixes
* tag 'v6.16-rc-part1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update the lock ordering comments with new mutex
cifs: dns resolution is needed only for primary channel
cifs: update dstaddr whenever channel iface is updated
cifs: reset connections for all channels when reconnect requested
smb: client: use ParentLeaseKey in cifs_do_create
smb: client: use ParentLeaseKey in open_cached_dir
smb: client: add ParentLeaseKey support
cifs: Fix cifs_query_path_info() for Windows NT servers
cifs: Fix validation of SMB1 query reparse point response
cifs: Correctly set SMB1 SessionKey field in Session Setup Request
cifs: Fix encoding of SMB1 Session Setup NTLMSSP Request in non-UNICODE mode
smb: client: add NULL check in automount_fullpath
smb: client: Remove an unused function and variable
On NFS4ERR_DELAY nfs slient updates its stats, but misses for
flexfiles v4.1 DSes.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
Without correct unregisteration, ACPI notify handlers and the platform
drivers installed by generic_subdriver_init() will become dangling
references after removing the loongson_laptop module, triggering various
kernel faults when a hotkey is sent or at kernel shutdown.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit cf9e4784f3bde3e4 ("spi: sh-msiof: Add slave mode support") added
a new mode member to the sh_msiof_spi_info structure, but did not update
any board files. Hence all users in board files rely on the default
being host mode.
Make this unambiguous by configuring host mode explicitly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
KBUILD_BUILTIN is set to 1 unless you are building only modules.
KBUILD_MODULES is set to 1 when you are building only modules
(a typical use case is "make modules").
It is more useful to set them to 'y' instead, so we can do
something like:
always-$(KBUILD_BUILTIN) += vmlinux.lds
This works equivalently to:
extra-y += vmlinux.lds
This allows us to deprecate extra-y. extra-y and always-y are quite
similar, and we do not need both.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull more smb client updates from Steve French:
- multichannel/reconnect fixes
- move smbdirect (smb over RDMA) defines to fs/smb/common so they will
be able to be used in the future more broadly, and a documentation
update explaining setting up smbdirect mounts
- update email address for Paulo
* tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
MAINTAINERS, mailmap: Update Paulo Alcantara's email address
cifs: add documentation for smbdirect setup
cifs: do not disable interface polling on failure
cifs: serialize other channels when query server interfaces is pending
cifs: deal with the channel loading lag while picking channels
smb: client: make use of common smbdirect_socket_parameters
smb: smbdirect: introduce smbdirect_socket_parameters
smb: client: make use of common smbdirect_socket
smb: smbdirect: add smbdirect_socket.h
smb: client: make use of common smbdirect.h
smb: smbdirect: add smbdirect.h with public structures
smb: client: make use of common smbdirect_pdu.h
smb: smbdirect: add smbdirect_pdu.h with protocol definitions
Ensure that propagation settings can only be changed for mounts located
in the caller's mount namespace. This change aligns permission checking
with the rest of mount(2).
Reviewed-by: Christian Brauner <brauner@kernel.org>
Fixes: 07b20889e305 ("beginning of the shared-subtree proper")
Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull mtrr update from Borislav Petkov:
"A single change to verify the presence of fixed MTRR ranges before
accessing the respective MSRs"
* tag 'x86_mtrr_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Check if fixed-range MTRRs exist in mtrr_save_fixed_ranges()
SNP platform can provide a vTPM device emulated by SVSM.
The "tpm-svsm" device can be handled by the platform driver registered by the
x86/sev core code.
Register the platform device only when SVSM is available and it supports vTPM
commands as checked by snp_svsm_vtpm_probe().
[ bp: Massage commit message. ]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250410135118.133240-5-sgarzare@redhat.com
Pull device mapper updates from Mikulas Patocka:
- better error handling when reloading a table
- use use generic disable_* functions instead of open coding them
- lock queue limits when reading them
- remove unneeded kvfree from alloc_targets
- fix BLK_FEAT_ATOMIC_WRITES
- pass through operations on wrapped inline crypto keys
- dm-verity:
- use softirq context only when !need_resched()
- fix a memory leak if some arguments are specified multiple times
- dm-mpath:
- interface for explicit probing of active paths
- replace spin_lock_irqsave with spin_lock_irq
- dm-delay: don't busy-wait in kthread
- dm-bufio: remove maximum age based eviction
- dm-flakey: various fixes
- vdo indexer: don't read request structure after enqueuing
- dm-zone: Use bdev_*() helper functions where applicable
- dm-mirror: fix a tiny race condition
- dm-stripe: small code cleanup
* tag 'for-6.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm-stripe: small code cleanup
dm-verity: fix a memory leak if some arguments are specified multiple times
dm-mirror: fix a tiny race condition
dm-table: check BLK_FEAT_ATOMIC_WRITES inside limits_lock
dm mpath: replace spin_lock_irqsave with spin_lock_irq
dm-mpath: Don't grab work_mutex while probing paths
dm-zone: Use bdev_*() helper functions where applicable
dm vdo indexer: don't read request structure after enqueuing
dm: pass through operations on wrapped inline crypto keys
blk-crypto: export wrapped key functions
dm-table: Set BLK_FEAT_ATOMIC_WRITES for target queue limits
dm mpath: Interface for explicit probing of active paths
dm: Allow .prepare_ioctl to handle ioctls directly
dm-flakey: make corrupting read bios work
dm-flakey: remove useless ERROR_READS check in flakey_end_io
dm-flakey: error all IOs when num_features is absent
dm-flakey: Clean up parsing messages
dm: remove unneeded kvfree from alloc_targets
dm-bufio: remove maximum age based eviction
dm-verity: use softirq context only when !need_resched()
...
The lock ordering rules listed as comments in cifsglob.h were
missing some lock details and also the fid_lock.
Updated those notes in this commit.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Instead of calling xchg() and unrcu_pointer() before
nfsd_file_put_local(), we now pass pointer to the __rcu pointer and call
xchg() and unrcu_pointer() inside that function.
Where unrcu_pointer() is currently called the internals of "struct
nfsd_file" are not known and that causes older compilers such as gcc-8
to complain.
In some cases we have a __kernel (aka normal) pointer not an __rcu
pointer so we need to cast it to __rcu first. This is strictly a
weakening so no information is lost. Somewhat surprisingly, this cast
is accepted by gcc-8.
This has the pleasing result that the cmpxchg() which sets ro_file and
rw_file, and also the xchg() which clears them, are both now in the nfsd
code.
Reported-by: Pali Rohár <pali@kernel.org>
Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Pull JFFS2 and UBIFS fixes from Richard Weinberger:
"JFFS2:
- Correctly check return code of jffs2_prealloc_raw_node_refs()
UBIFS:
- Spelling fixes"
* tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: check jffs2_prealloc_raw_node_refs() result in few other places
jffs2: check that raw node were preallocated before writing summary
ubifs: Fix grammar in error message
ASoC: Fixes for v6.16
A bunch of fixes, including a big batch for the Intel AVS driver, and
one new device ID. It's all device specific.
loongson_laptop_turn_{on,off}_backlight() are designed for controlling
the power of the backlight, but they aren't really used in the driver
previously.
Unify these two functions since they only differ in arguments passed to
ACPI method, and wire up loongson_laptop_backlight_update() to update
the power state of the backlight as well. Tested on the TongFang L860-T2
Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
These objects are built as prerequisites of %.stub.o files.
There is no need to use extra-y, which is planned for deprecation.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
- Fix ring_buffer_subbuf_order_set() error path lock protection
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
to 2.55
Signed-off-by: Steve French <stfrench@microsoft.com>
What we want is to verify there is that clone won't expose something
hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo"
may be a result of MNT_LOCKED on a child, but it may also come from
lacking admin rights in the userns of the namespace mount belongs to.
clone_private_mnt() checks the former, but not the latter.
There's a number of rather confusing CAP_SYS_ADMIN checks in various
userns during the mount, especially with the new mount API; they serve
different purposes and in case of clone_private_mnt() they usually,
but not always end up covering the missing check mentioned above.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com>
Fixes: 427215d85e8d ("ovl: prevent private clone if bind mount is not allowed")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull EDAC updates from Borislav Petkov:
- ie31200: Add support for Raptor Lake-S and Alder Lake-S compute dies
- Rework how RRL registers per channel tracking is done in order to
support newer hardware with different RRL configurations and refactor
that code. Add support for Granite Rapids server
- i10nm: explicitly set RRL modes to fix any wrong BIOS programming
- Properly save and restore Retry Read error Log channel configuration
info on Intel drivers
- igen6: Handle correctly the case of fused off memory controllers on
Arizona Beach and Amston Lake SoCs before adding support for them
- the usual set of fixes and cleanups
* tag 'edac_updates_for_v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/bluefield: Don't use bluefield_edac_readl() result on error
EDAC/i10nm: Fix the bitwise operation between variables of different sizes
EDAC/ie31200: Add two Intel SoCs for EDAC support
EDAC/{skx_common,i10nm}: Add RRL support for Intel Granite Rapids server
EDAC/{skx_common,i10nm}: Refactor show_retry_rd_err_log()
EDAC/{skx_common,i10nm}: Refactor enable_retry_rd_err_log()
EDAC/{skx_common,i10nm}: Structure the per-channel RRL registers
EDAC/i10nm: Explicitly set the modes of the RRL register sets
EDAC/{skx_common,i10nm}: Fix the loss of saved RRL for HBM pseudo channel 0
EDAC/skx_common: Fix general protection fault
EDAC/igen6: Add Intel Amston Lake SoCs support
EDAC/igen6: Add Intel Arizona Beach SoCs support
EDAC/igen6: Skip absent memory controllers
When suspending, save_processor_state() calls mtrr_save_fixed_ranges()
to save fixed-range MTRRs.
On platforms without fixed-range MTRRs like the ACRN hypervisor which
has removed fixed-range MTRR emulation, accessing these MSRs will
trigger an unchecked MSR access error. Make sure fixed-range MTRRs are
supported before access to prevent such error.
Since mtrr_state.have_fixed is only set when MTRRs are present and
enabled, checking the CPU feature flag in mtrr_save_fixed_ranges() is
unnecessary.
Fixes: 3ebad5905609 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending")
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250509170633.3411169-2-jiaqing.zhao@linux.intel.com
Add driver for the vTPM defined by the AMD SVSM spec [1].
The specification defines a protocol that a SEV-SNP guest OS can use to
discover and talk to a vTPM emulated by the Secure VM Service Module (SVSM) in
the guest context, but at a more privileged level (VMPL0).
The new tpm-svsm platform driver uses API exposed by the x86/sev core
implementation interface to a SVSM to send commands and receive responses.
The device cannot be hot-plugged/unplugged as it is emulated by the platform,
so module_platform_driver_probe() can be used. The device will be registered
by the platform only when it's available, so the probe function just needs to
setup the tpm_chip.
This device does not support interrupts and sends responses to commands
synchronously.
In order to have .recv() called just after .send() in tpm_try_transmit(), the
.status() callback is not implemented as recently supported by commit
980a573621ea ("tpm: Make chip->{status,cancel,req_canceled} opt").
[1] "Secure VM Service Module for SEV-SNP Guests"
Publication # 58019 Revision: 1.00
[ bp: Massage commit message. ]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250410135118.133240-4-sgarzare@redhat.com
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf report/top/annotate TUI:
- Accept the left arrow key as a Zoom out if done on the first column
- Show if source code toggle status in title, to help spotting bugs
with the various disassemblers (capstone, llvm, objdump)
- Provide feedback on unhandled hotkeys
Build:
- Better inform when certain features are not available with warnings
in the build process and in 'perf version --build-options' or 'perf -vv'
perf record:
- Improve the --off-cpu code by synthesizing events for switch-out ->
switch-in intervals using a BPF program. This can be fine tuned
using a --off-cpu-thresh knob
perf report:
- Add 'tgid' sort key
perf mem/c2c:
- Add 'op', 'cache', 'snoop', 'dtlb' output fields
- Add support for 'ldlat' on AMD IBS (Instruction Based Sampling)
perf ftrace:
- Use process/session specific trace settings instead of messing with
the global ftrace knobs
perf trace:
- Implement syscall summary in BPF
- Support --summary-mode=cgroup
- Always print return value for syscalls returning a pid
- The rseq and set_robust_list don't return a pid, just -errno
perf lock contention:
- Symbolize zone->lock using BTF
- Add -J/--inject-delay option to estimate impact on application
performance by optimization of kernel locking behavior
perf stat:
- Improve hybrid support for the NMI watchdog warning
Symbol resolution:
- Handle 'u' and 'l' symbols in /proc/kallsyms, resolving some Rust
symbols
- Improve Rust demangler
Hardware tracing:
Intel PT:
- Fix PEBS-via-PT data_src
- Do not default to recording all switch events
- Fix pattern matching with python3 on the SQL viewer script
arm64:
- Fixups for the hip08 hha PMU
Vendor events:
- Update Intel events/metrics files for alderlake, alderlaken,
arrowlake, bonnell, broadwell, broadwellde, broadwellx,
cascadelakex, clearwaterforest, elkhartlake, emeraldrapids,
grandridge, graniterapids, haswell, haswellx, icelake, icelakex,
ivybridge, ivytown, jaketown, lunarlake, meteorlake, nehalemep,
nehalemex, rocketlake, sandybridge, sapphirerapids, sierraforest,
skylake, skylakex, snowridgex, tigerlake, westmereep-dp,
westmereep-sp, westmereep-sx
python support:
- Add support for event counts in the python binding, add a
counting.py example
perf list:
- Display the PMU name associated with a perf metric in JSON
perf test:
- Hybrid improvements for metric value validation test
- Fix LBR test by ignoring idle task
- Add AMD IBS sw filter ana d'ldlat' tests
- Add 'perf trace --summary-mode=cgroup' test
- Add tests for the various language symbol demanglers
Miscellaneous:
- Allow specifying the cpu an event will be tied using '-e
event/cpu=N/'
- Sync various headers with the kernel sources
- Add annotations to use clang's -Wthread-safety and fix some
problems it detected
- Make dump_stack() use perf's symbol resolution to provide better
backtraces
- Intel TPEBS support cleanups and fixes. TPEBS stands for Timed PEBS
(Precision Event-Based Sampling), that adds timing info, the
retirement latency of instructions
- Various memory allocation (some detected by ASAN) and reference
counting fixes
- Add a 8-byte aligned PERF_RECORD_COMPRESSED2 to replace
PERF_RECORD_COMPRESSED
- Skip unsupported event types in perf.data files, don't stop when
finding one
- Improve lookups using hashmaps and binary searches"
* tag 'perf-tools-for-v6.16-1-2025-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (206 commits)
perf callchain: Always populate the addr_location map when adding IP
perf lock contention: Reject more than 10ms delays for safety
perf trace: Set errpid to false for rseq and set_robust_list
perf symbol: Move demangling code out of symbol-elf.c
perf trace: Always print return value for syscalls returning a pid
perf script: Print PERF_AUX_FLAG_COLLISION flag
perf mem: Show absolute percent in mem_stat output
perf mem: Display sort order only if it's available
perf mem: Describe overhead calculation in brief
perf record: Fix incorrect --user-regs comments
Revert "perf thread: Ensure comm_lock held for comm_list"
perf test trace_summary: Skip --bpf-summary tests if no libbpf
perf test intel-pt: Skip jitdump test if no libelf
perf intel-tpebs: Avoid race when evlist is being deleted
perf test demangle-java: Don't segv if demangling fails
perf symbol: Fix use-after-free in filename__read_build_id
perf pmu: Avoid segv for missing name/alias_name in wildcarding
perf machine: Factor creating a "live" machine out of dwarf-unwind
perf test: Add AMD IBS sw filter test
perf mem: Count L2 HITM for c2c statistic
...
This commit doesn't fix any bug, it is just code cleanup. Use the
function format_dev_t instead of sprintf, because format_dev_t does the
same thing.
Remove the useless memset call.
An unsigned integer can take at most 10 digits, so extend the array size
to 22. (note that because the range of minor and major numbers is limited,
the size 16 could not be exceeded, thus this function couldn't write
beyond string end)
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When calling cifs_reconnect, before the connection to the
server is reestablished, the code today does a DNS resolution and
updates server->dstaddr.
However, this is not necessary for secondary channels. Secondary
channels use the interface list returned by the server to decide
which address to connect to. And that happens after tcon is reconnected
and server interfaces are requested.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
nfs_uuid_put() and nfs_close_local_fh() can race if a "struct
nfs_file_localio" is released at the same time that nfsd calls
nfs_localio_invalidate_clients().
It is important that neither of these functions completes after the
other has started looking at a given nfs_file_localio and before it
finishes.
If nfs_uuid_put() exits while nfs_close_local_fh() is closing ro_file
and rw_file it could return to __nfd_file_cache_purge() while some files
are still referenced so the purge may not succeed.
If nfs_close_local_fh() exits while nfsd_uuid_put() is still closing the
files then the "struct nfs_file_localio" could be freed while
nfsd_uuid_put() is still looking at it. This side is currently handled
by copying the pointers out of ro_file and rw_file before deleting from
the list in nfsd_uuid. We need to preserve this while ensuring that
nfsd_uuid_put() does wait for nfs_close_local_fh().
This patch use nfl->uuid and nfl->list to provide the required
interlock.
nfs_uuid_put() removes the nfs_file_localio from the list, then drops
locks and puts the two files, then reclaims the spinlock and sets
->nfs_uuid to NULL.
nfs_close_local_fh() operates in the reverse order, setting ->nfs_uuid
to NULL, then closing the files, then unlinking from the list.
If nfs_uuid_put() finds that ->nfs_uuid is already NULL, it waits for
the nfs_file_localio to be removed from the list. If
nfs_close_local_fh() find that it has already been unlinked it waits for
->nfs_uuid to become NULL. This ensure that one of the two tries to
close the files, but they each waits for the other.
As nfs_uuid_put() is making the list empty, change from a
list_for_each_safe loop to a while that always takes the first entry.
This makes the intent more clear.
Also don't move the list to a temporary local list as this would defeat
the guarantees required for the interlock.
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
Fuzzing hit another invalid pointer dereference due to the lack of
checking whether jffs2_prealloc_raw_node_refs() completed successfully.
Subsequent logic implies that the node refs have been allocated.
Handle that. The code is ready for propagating the error upwards.
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 5835 Comm: syz-executor145 Not tainted 5.10.234-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:jffs2_link_node_ref+0xac/0x690 fs/jffs2/nodelist.c:600
Call Trace:
jffs2_mark_erased_block fs/jffs2/erase.c:460 [inline]
jffs2_erase_pending_blocks+0x688/0x1860 fs/jffs2/erase.c:118
jffs2_garbage_collect_pass+0x638/0x1a00 fs/jffs2/gc.c:253
jffs2_reserve_space+0x3f4/0xad0 fs/jffs2/nodemgmt.c:167
jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362
jffs2_write_end+0x712/0x1110 fs/jffs2/file.c:302
generic_perform_write+0x2c2/0x500 mm/filemap.c:3347
__generic_file_write_iter+0x252/0x610 mm/filemap.c:3465
generic_file_write_iter+0xdb/0x230 mm/filemap.c:3497
call_write_iter include/linux/fs.h:2039 [inline]
do_iter_readv_writev+0x46d/0x750 fs/read_write.c:740
do_iter_write+0x18c/0x710 fs/read_write.c:866
vfs_writev+0x1db/0x6a0 fs/read_write.c:939
do_pwritev fs/read_write.c:1036 [inline]
__do_sys_pwritev fs/read_write.c:1083 [inline]
__se_sys_pwritev fs/read_write.c:1078 [inline]
__x64_sys_pwritev+0x235/0x310 fs/read_write.c:1078
do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 2f785402f39b ("[JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code.")
Fixes: f560928baa60 ("[JFFS2] Allocate node_ref for wasted space when skipping to page boundary")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Pull turbostat updates from Len Brown:
- Add initial DMR support, which required smarter RAPL probe
- Fix AMD MSR RAPL energy reporting
- Add RAPL power limit configuration output
- Minor fixes
* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.06.08
tools/power turbostat: Add initial support for BartlettLake
tools/power turbostat: Add initial support for DMR
tools/power turbostat: Dump RAPL sysfs info
tools/power turbostat: Avoid probing the same perf counters
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
tools/power turbostat: Clean up add perf/msr counter logic
tools/power turbostat: Introduce add_msr_counter()
tools/power turbostat: Remove add_msr_perf_counter_()
tools/power turbostat: Remove add_cstate_perf_counter_()
tools/power turbostat: Remove add_rapl_perf_counter_()
tools/power turbostat: Quit early for unsupported RAPL counters
tools/power turbostat: Always check rapl_joules flag
tools/power turbostat: Fix AMD package-energy reporting
tools/power turbostat: Fix RAPL_GFX_ALL typo
tools/power turbostat: Add Android support for MSR device handling
tools/power turbostat.8: pm_domain wording fix
tools/power turbostat.8: fix typo: idle_pct should be pct_idle
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
A lockdep fix removed two rdt_last_cmd_clear() calls that were used to
clear the last_cmd_status buffer but called without holding the required
rdtgroup_mutex.
The impacted resctrl commands are writing to the cpus or cpus_list files
and creating a new monitor or control group. With stale data in the
last_cmd_status buffer the impacted resctrl commands report the stale error
on success, or append its own failure message to the stale error on
failure.
Consequently, restore the rdt_last_cmd_clear() calls after acquiring
rdtgroup_mutex.
Fixes: c8eafe149530 ("x86/resctrl: Fix potential lockdep warning")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/all/20250603125828.1590067-1-zengheng4@huawei.com
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
Pull x86 perf fix from Thomas Gleixner:
"A single fix for the x86 performance counters on Intel CPUs:
The MSR offset calculations for fixed performance counters are stored
at the wrong index in the configuration array causing the general
purpose counter MSR offset to be overwritten, so both the general
purpose and the fixed counters offsets are incorrect.
Correct the array index calculation to fix that"
* tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix incorrect MSR index calculations in intel_pmu_config_acr()
Add forward declaration of struct seq_file before using it in a
function prototype.
Fixes: 04a8682a71be ("fs/proc: Introduce /proc/pid/timens_offsets")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/all/aDlskzKIAULMlwPj@gondor.apana.org.au
io_bitmap_exit() is invoked from exit_thread() when a task exists or
when a fork fails. In the latter case the exit_thread() cleans up
resources which were allocated during fork().
io_bitmap_exit() invokes task_update_io_bitmap(), which in turn ends up
in tss_update_io_bitmap(). tss_update_io_bitmap() operates on the
current task. If current has TIF_IO_BITMAP set, but no bitmap installed,
tss_update_io_bitmap() crashes with a NULL pointer dereference.
There are two issues, which lead to that problem:
1) io_bitmap_exit() should not invoke task_update_io_bitmap() when
the task, which is cleaned up, is not the current task. That's a
clear indicator for a cleanup after a failed fork().
2) A task should not have TIF_IO_BITMAP set and neither a bitmap
installed nor IOPL emulation level 3 activated.
This happens when a kernel thread is created in the context of
a user space thread, which has TIF_IO_BITMAP set as the thread
flags are copied and the IO bitmap pointer is cleared.
Other than in the failed fork() case this has no impact because
kernel threads including IO workers never return to user space and
therefore never invoke tss_update_io_bitmap().
Cure this by adding the missing cleanups and checks:
1) Prevent io_bitmap_exit() to invoke task_update_io_bitmap() if
the to be cleaned up task is not the current task.
2) Clear TIF_IO_BITMAP in copy_thread() unconditionally. For user
space forks it is set later, when the IO bitmap is inherited in
io_bitmap_share().
For paranoia sake, add a warning into tss_update_io_bitmap() to catch
the case, when that code is invoked with inconsistent state.
Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped")
Reported-by: syzbot+e2b1803445d236442e54@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/87wmdceom2.ffs@tglx
Pull sh updates from John Paul Adrian Glaubitz:
- replace the __ASSEMBLY__ with __ASSEMBLER__ macro in all headers
since the latter is now defined automatically by both GCC and Clang
when compiling assembly code (Thomas Huth)
- set the default SPI mode for the ecovec24 board which became
necessary after a new mode member as added to the sh_msiof_spi_info
struct in cf9e4784f3bd ("spi: sh-msiof: Add slave mode support")
(Geert Uytterhoeven)
- remove unused variables in the kprobes code in
kprobe_exceptions_notify() (Mike Rapoport)
* tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: kprobes: Remove unused variables in kprobe_exceptions_notify()
sh: ecovec24: Make SPI mode explicit
sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
Enumeration constants read from a symbol reference file can incorrectly
affect new enumeration constants parsed from an actual input file.
Example:
$ cat test.c
enum { E_A, E_B, E_MAX };
struct bar { int mem[E_MAX]; };
int foo(struct bar *a) {}
__GENKSYMS_EXPORT_SYMBOL(foo);
$ cat test.c | ./scripts/genksyms/genksyms -T test.0.symtypes
#SYMVER foo 0x070d854d
$ cat test.0.symtypes
E#E_MAX 2
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
$ cat test.c | ./scripts/genksyms/genksyms -T test.1.symtypes -r test.0.symtypes
<stdin>:4: warning: foo: modversion changed because of changes in enum constant E_MAX
#SYMVER foo 0x9c9dfd81
$ cat test.1.symtypes
E#E_MAX ( 2 ) + 3
s#bar struct bar { int mem [ E#E_MAX ] ; }
foo int foo ( s#bar * )
The __add_symbol() function includes logic to handle the incrementation of
enumeration values, but this code is also invoked when reading a reference
file. As a result, the variables last_enum_expr and enum_counter might be
incorrectly set after reading the reference file, which later affects
parsing of the actual input.
Fix the problem by splitting the logic for the incrementation of
enumeration values into a separate function process_enum() and call it from
__add_symbol() only when processing non-reference data.
Fixes: e37ddb825003 ("genksyms: Track changes to enum constants")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
for example:
intel-rapl:1: psys 28.0s:100W 976.0us:100W
intel-rapl:0: package-0 28.0s:57W,max:15W 2.4ms:57W
intel-rapl:0/intel-rapl:0:0: core disabled
intel-rapl:0/intel-rapl:0:1: uncore disabled
intel-rapl-mmio:0: package-0 28.0s:28W,max:15W 2.4ms:57W
[lenb: simplified format]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
squish me
Signed-off-by: Len Brown <len.brown@intel.com>
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
The MSR offset calculations in intel_pmu_config_acr() are buggy.
To calculate fixed counter MSR addresses in intel_pmu_config_acr(),
the HW counter index "idx" is subtracted by INTEL_PMC_IDX_FIXED.
This leads to the ACR mask value of fixed counters to be incorrectly
saved to the positions of GP counters in acr_cfg_b[], e.g.
For fixed counter 0, its ACR counter mask should be saved to
acr_cfg_b[32], but it's saved to acr_cfg_b[0] incorrectly.
Fix this issue.
[ mingo: Clarified & improved the changelog. ]
Fixes: ec980e4facef ("perf/x86/intel: Support auto counter reload")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250529080236.2552247-2-dapeng1.mi@linux.intel.com
Pull NFS clent updates from Anna Schumaker:
"New Features:
- Implement the Sunrpc rfc2203 rpcsec_gss sequence number cache
- Add support for FALLOC_FL_ZERO_RANGE on NFS v4.2
- Add a localio sysfs attribute
Stable Fixes:
- Fix double-unlock bug in nfs_return_empty_folio()
- Don't check for OPEN feature support in v4.1
- Always probe for LOCALIO support asynchronously
- Prevent hang on NFS mounts with xprtsec=[m]tls
Other Bugfixes:
- xattr handlers should check for absent nfs filehandles
- Fix setattr caching of TIME_[MODIFY|ACCESS]_SET when timestamps are
delegated
- Fix listxattr to return selinux security labels
- Connect to NFSv3 DS using TLS if MDS connection uses TLS
- Clear SB_RDONLY before getting a superblock, and ignore when
remounting
- Fix incorrect handling of NFS error codes in nfs4_do_mkdir()
- Various nfs_localio fixes from Neil Brown that include fixing an
rcu compilation error found by older gcc versions.
- Update stats on flexfiles pNFS DSes when receiving NFS4ERR_DELAY
Cleanups:
- Add a refcount tracker for struct net in the nfs_client
- Allow FREE_STATEID to clean up delegations
- Always set NLINK even if the server doesn't support it
- Cleanups to the NFS folio writeback code
- Remove dead code from xs_tcp_tls_setup_socket()"
* tag 'nfs-for-6.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (30 commits)
flexfiles/pNFS: update stats on NFS4ERR_DELAY for v4.1 DSes
nfs_localio: change nfsd_file_put_local() to take a pointer to __rcu pointer
nfs_localio: protect race between nfs_uuid_put() and nfs_close_local_fh()
nfs_localio: duplicate nfs_close_local_fh()
nfs_localio: simplify interface to nfsd for getting nfsd_file
nfs_localio: always hold nfsd net ref with nfsd_file ref
nfs_localio: use cmpxchg() to install new nfs_file_localio
SUNRPC: Remove dead code from xs_tcp_tls_setup_socket()
SUNRPC: Prevent hang on NFS mount with xprtsec=[m]tls
nfs: fix incorrect handling of large-number NFS errors in nfs4_do_mkdir()
nfs: ignore SB_RDONLY when remounting nfs
nfs: clear SB_RDONLY before getting superblock
NFS: always probe for LOCALIO support asynchronously
pnfs/flexfiles: connect to NFSv3 DS using TLS if MDS connection uses TLS
NFS: add localio to sysfs
nfs: use writeback_iter directly
nfs: refactor nfs_do_writepage
nfs: don't return AOP_WRITEPAGE_ACTIVATE from nfs_do_writepage
nfs: fold nfs_page_async_flush into nfs_do_writepage
NFSv4: Always set NLINK even if the server doesn't support it
...
The following trace events are not used and defining them just wastes
memory:
x86_fpu_before_restore
x86_fpu_after_restore
x86_fpu_init_state
Simply remove them.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home # background
Link: https://lore.kernel.org/r/20250529131024.7c2ef96f@gandalf.local.home # x86 submission
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
kbuild reports the following warning:
arch/sh/kernel/kprobes.c: In function 'kprobe_exceptions_notify':
>> arch/sh/kernel/kprobes.c:412:24: warning: variable 'p' set but not used [-Wunused-but-set-variable]
412 | struct kprobe *p = NULL;
| ^
The variable 'p' is indeed unused since the commit fa5a24b16f94
("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Remove that variable along with 'kprobe_opcode_t *addr' which also
becomes unused after 'p' is removed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505151341.EuRFR22l-lkp@intel.com/
Fixes: fa5a24b16f94 ("sh/kprobes: Don't call the ->break_handler() in SH kprobes code")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
Zenghui reports that since 1396e89e09f0 ("genirq/msi: Move prepare() call
to per-device allocation"), his Multi-MSI capable device isn't working
anymore.
This is a consequence of 15c72f824b32 ("PCI/MSI: Add support for per device
MSI[X] domains"), which always creates a MSI domain of size 1, even in the
presence of Multi-MSI.
While this was somehow working until then, moving the .prepare() call ends
up sizing the ITS table with a tiny value for this device, and making the
endpoint driver unhappy.
Instead, always create the domain and call the .prepare() helper with the
maximum expected size.
Fixes: 1396e89e09f0 ("genirq/msi: Move prepare() call to per-device allocation")
Fixes: 15c72f824b32 ("PCI/MSI: Add support for per device MSI[X] domains")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/all/20250603141801.915305-1-maz@kernel.org
Closes: https://lore.kernel.org/r/0b1d7aec-1eac-a9cd-502a-339e216e08a1@huawei.com
Pull AMD SEV update from Borislav Petkov:
"Add a virtual TPM driver glue which allows a guest kernel to talk to a
TPM device emulated by a Secure VM Service Module (SVSM) - a helper
module of sorts which runs at a different privilege level in the
SEV-SNP VM stack.
The intent being that a TPM device is emulated by a trusted entity and
not by the untrusted host which is the default assumption in the
confidential computing scenarios"
* tag 'x86_sev_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Register tpm-svsm platform device
tpm: Add SNP SVSM vTPM driver
svsm: Add header with SVSM_VTPM_CMD helpers
x86/sev: Add SVSM vTPM probe/send_command functions
Pull smb client updates from Steve French:
- multichannel fixes (mostly reconnect related), and clarification of
locking documentation
- automount null pointer check fix
- fixes to add support for ParentLeaseKey
- minor cleanup
- smb1/cifs fixes
* tag 'v6.16-rc-part1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update the lock ordering comments with new mutex
cifs: dns resolution is needed only for primary channel
cifs: update dstaddr whenever channel iface is updated
cifs: reset connections for all channels when reconnect requested
smb: client: use ParentLeaseKey in cifs_do_create
smb: client: use ParentLeaseKey in open_cached_dir
smb: client: add ParentLeaseKey support
cifs: Fix cifs_query_path_info() for Windows NT servers
cifs: Fix validation of SMB1 query reparse point response
cifs: Correctly set SMB1 SessionKey field in Session Setup Request
cifs: Fix encoding of SMB1 Session Setup NTLMSSP Request in non-UNICODE mode
smb: client: add NULL check in automount_fullpath
smb: client: Remove an unused function and variable
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
Without correct unregisteration, ACPI notify handlers and the platform
drivers installed by generic_subdriver_init() will become dangling
references after removing the loongson_laptop module, triggering various
kernel faults when a hotkey is sent or at kernel shutdown.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit cf9e4784f3bde3e4 ("spi: sh-msiof: Add slave mode support") added
a new mode member to the sh_msiof_spi_info structure, but did not update
any board files. Hence all users in board files rely on the default
being host mode.
Make this unambiguous by configuring host mode explicitly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
KBUILD_BUILTIN is set to 1 unless you are building only modules.
KBUILD_MODULES is set to 1 when you are building only modules
(a typical use case is "make modules").
It is more useful to set them to 'y' instead, so we can do
something like:
always-$(KBUILD_BUILTIN) += vmlinux.lds
This works equivalently to:
extra-y += vmlinux.lds
This allows us to deprecate extra-y. extra-y and always-y are quite
similar, and we do not need both.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull more smb client updates from Steve French:
- multichannel/reconnect fixes
- move smbdirect (smb over RDMA) defines to fs/smb/common so they will
be able to be used in the future more broadly, and a documentation
update explaining setting up smbdirect mounts
- update email address for Paulo
* tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
MAINTAINERS, mailmap: Update Paulo Alcantara's email address
cifs: add documentation for smbdirect setup
cifs: do not disable interface polling on failure
cifs: serialize other channels when query server interfaces is pending
cifs: deal with the channel loading lag while picking channels
smb: client: make use of common smbdirect_socket_parameters
smb: smbdirect: introduce smbdirect_socket_parameters
smb: client: make use of common smbdirect_socket
smb: smbdirect: add smbdirect_socket.h
smb: client: make use of common smbdirect.h
smb: smbdirect: add smbdirect.h with public structures
smb: client: make use of common smbdirect_pdu.h
smb: smbdirect: add smbdirect_pdu.h with protocol definitions
Ensure that propagation settings can only be changed for mounts located
in the caller's mount namespace. This change aligns permission checking
with the rest of mount(2).
Reviewed-by: Christian Brauner <brauner@kernel.org>
Fixes: 07b20889e305 ("beginning of the shared-subtree proper")
Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
SNP platform can provide a vTPM device emulated by SVSM.
The "tpm-svsm" device can be handled by the platform driver registered by the
x86/sev core code.
Register the platform device only when SVSM is available and it supports vTPM
commands as checked by snp_svsm_vtpm_probe().
[ bp: Massage commit message. ]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250410135118.133240-5-sgarzare@redhat.com
Pull device mapper updates from Mikulas Patocka:
- better error handling when reloading a table
- use use generic disable_* functions instead of open coding them
- lock queue limits when reading them
- remove unneeded kvfree from alloc_targets
- fix BLK_FEAT_ATOMIC_WRITES
- pass through operations on wrapped inline crypto keys
- dm-verity:
- use softirq context only when !need_resched()
- fix a memory leak if some arguments are specified multiple times
- dm-mpath:
- interface for explicit probing of active paths
- replace spin_lock_irqsave with spin_lock_irq
- dm-delay: don't busy-wait in kthread
- dm-bufio: remove maximum age based eviction
- dm-flakey: various fixes
- vdo indexer: don't read request structure after enqueuing
- dm-zone: Use bdev_*() helper functions where applicable
- dm-mirror: fix a tiny race condition
- dm-stripe: small code cleanup
* tag 'for-6.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm-stripe: small code cleanup
dm-verity: fix a memory leak if some arguments are specified multiple times
dm-mirror: fix a tiny race condition
dm-table: check BLK_FEAT_ATOMIC_WRITES inside limits_lock
dm mpath: replace spin_lock_irqsave with spin_lock_irq
dm-mpath: Don't grab work_mutex while probing paths
dm-zone: Use bdev_*() helper functions where applicable
dm vdo indexer: don't read request structure after enqueuing
dm: pass through operations on wrapped inline crypto keys
blk-crypto: export wrapped key functions
dm-table: Set BLK_FEAT_ATOMIC_WRITES for target queue limits
dm mpath: Interface for explicit probing of active paths
dm: Allow .prepare_ioctl to handle ioctls directly
dm-flakey: make corrupting read bios work
dm-flakey: remove useless ERROR_READS check in flakey_end_io
dm-flakey: error all IOs when num_features is absent
dm-flakey: Clean up parsing messages
dm: remove unneeded kvfree from alloc_targets
dm-bufio: remove maximum age based eviction
dm-verity: use softirq context only when !need_resched()
...
Instead of calling xchg() and unrcu_pointer() before
nfsd_file_put_local(), we now pass pointer to the __rcu pointer and call
xchg() and unrcu_pointer() inside that function.
Where unrcu_pointer() is currently called the internals of "struct
nfsd_file" are not known and that causes older compilers such as gcc-8
to complain.
In some cases we have a __kernel (aka normal) pointer not an __rcu
pointer so we need to cast it to __rcu first. This is strictly a
weakening so no information is lost. Somewhat surprisingly, this cast
is accepted by gcc-8.
This has the pleasing result that the cmpxchg() which sets ro_file and
rw_file, and also the xchg() which clears them, are both now in the nfsd
code.
Reported-by: Pali Rohár <pali@kernel.org>
Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Pull JFFS2 and UBIFS fixes from Richard Weinberger:
"JFFS2:
- Correctly check return code of jffs2_prealloc_raw_node_refs()
UBIFS:
- Spelling fixes"
* tag 'ubifs-for-linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: check jffs2_prealloc_raw_node_refs() result in few other places
jffs2: check that raw node were preallocated before writing summary
ubifs: Fix grammar in error message
loongson_laptop_turn_{on,off}_backlight() are designed for controlling
the power of the backlight, but they aren't really used in the driver
previously.
Unify these two functions since they only differ in arguments passed to
ACPI method, and wire up loongson_laptop_backlight_update() to update
the power state of the backlight as well. Tested on the TongFang L860-T2
Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
- Fix ring_buffer_subbuf_order_set() error path lock protection
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
What we want is to verify there is that clone won't expose something
hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo"
may be a result of MNT_LOCKED on a child, but it may also come from
lacking admin rights in the userns of the namespace mount belongs to.
clone_private_mnt() checks the former, but not the latter.
There's a number of rather confusing CAP_SYS_ADMIN checks in various
userns during the mount, especially with the new mount API; they serve
different purposes and in case of clone_private_mnt() they usually,
but not always end up covering the missing check mentioned above.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com>
Fixes: 427215d85e8d ("ovl: prevent private clone if bind mount is not allowed")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull EDAC updates from Borislav Petkov:
- ie31200: Add support for Raptor Lake-S and Alder Lake-S compute dies
- Rework how RRL registers per channel tracking is done in order to
support newer hardware with different RRL configurations and refactor
that code. Add support for Granite Rapids server
- i10nm: explicitly set RRL modes to fix any wrong BIOS programming
- Properly save and restore Retry Read error Log channel configuration
info on Intel drivers
- igen6: Handle correctly the case of fused off memory controllers on
Arizona Beach and Amston Lake SoCs before adding support for them
- the usual set of fixes and cleanups
* tag 'edac_updates_for_v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/bluefield: Don't use bluefield_edac_readl() result on error
EDAC/i10nm: Fix the bitwise operation between variables of different sizes
EDAC/ie31200: Add two Intel SoCs for EDAC support
EDAC/{skx_common,i10nm}: Add RRL support for Intel Granite Rapids server
EDAC/{skx_common,i10nm}: Refactor show_retry_rd_err_log()
EDAC/{skx_common,i10nm}: Refactor enable_retry_rd_err_log()
EDAC/{skx_common,i10nm}: Structure the per-channel RRL registers
EDAC/i10nm: Explicitly set the modes of the RRL register sets
EDAC/{skx_common,i10nm}: Fix the loss of saved RRL for HBM pseudo channel 0
EDAC/skx_common: Fix general protection fault
EDAC/igen6: Add Intel Amston Lake SoCs support
EDAC/igen6: Add Intel Arizona Beach SoCs support
EDAC/igen6: Skip absent memory controllers
When suspending, save_processor_state() calls mtrr_save_fixed_ranges()
to save fixed-range MTRRs.
On platforms without fixed-range MTRRs like the ACRN hypervisor which
has removed fixed-range MTRR emulation, accessing these MSRs will
trigger an unchecked MSR access error. Make sure fixed-range MTRRs are
supported before access to prevent such error.
Since mtrr_state.have_fixed is only set when MTRRs are present and
enabled, checking the CPU feature flag in mtrr_save_fixed_ranges() is
unnecessary.
Fixes: 3ebad5905609 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending")
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250509170633.3411169-2-jiaqing.zhao@linux.intel.com
Add driver for the vTPM defined by the AMD SVSM spec [1].
The specification defines a protocol that a SEV-SNP guest OS can use to
discover and talk to a vTPM emulated by the Secure VM Service Module (SVSM) in
the guest context, but at a more privileged level (VMPL0).
The new tpm-svsm platform driver uses API exposed by the x86/sev core
implementation interface to a SVSM to send commands and receive responses.
The device cannot be hot-plugged/unplugged as it is emulated by the platform,
so module_platform_driver_probe() can be used. The device will be registered
by the platform only when it's available, so the probe function just needs to
setup the tpm_chip.
This device does not support interrupts and sends responses to commands
synchronously.
In order to have .recv() called just after .send() in tpm_try_transmit(), the
.status() callback is not implemented as recently supported by commit
980a573621ea ("tpm: Make chip->{status,cancel,req_canceled} opt").
[1] "Secure VM Service Module for SEV-SNP Guests"
Publication # 58019 Revision: 1.00
[ bp: Massage commit message. ]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250410135118.133240-4-sgarzare@redhat.com
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf report/top/annotate TUI:
- Accept the left arrow key as a Zoom out if done on the first column
- Show if source code toggle status in title, to help spotting bugs
with the various disassemblers (capstone, llvm, objdump)
- Provide feedback on unhandled hotkeys
Build:
- Better inform when certain features are not available with warnings
in the build process and in 'perf version --build-options' or 'perf -vv'
perf record:
- Improve the --off-cpu code by synthesizing events for switch-out ->
switch-in intervals using a BPF program. This can be fine tuned
using a --off-cpu-thresh knob
perf report:
- Add 'tgid' sort key
perf mem/c2c:
- Add 'op', 'cache', 'snoop', 'dtlb' output fields
- Add support for 'ldlat' on AMD IBS (Instruction Based Sampling)
perf ftrace:
- Use process/session specific trace settings instead of messing with
the global ftrace knobs
perf trace:
- Implement syscall summary in BPF
- Support --summary-mode=cgroup
- Always print return value for syscalls returning a pid
- The rseq and set_robust_list don't return a pid, just -errno
perf lock contention:
- Symbolize zone->lock using BTF
- Add -J/--inject-delay option to estimate impact on application
performance by optimization of kernel locking behavior
perf stat:
- Improve hybrid support for the NMI watchdog warning
Symbol resolution:
- Handle 'u' and 'l' symbols in /proc/kallsyms, resolving some Rust
symbols
- Improve Rust demangler
Hardware tracing:
Intel PT:
- Fix PEBS-via-PT data_src
- Do not default to recording all switch events
- Fix pattern matching with python3 on the SQL viewer script
arm64:
- Fixups for the hip08 hha PMU
Vendor events:
- Update Intel events/metrics files for alderlake, alderlaken,
arrowlake, bonnell, broadwell, broadwellde, broadwellx,
cascadelakex, clearwaterforest, elkhartlake, emeraldrapids,
grandridge, graniterapids, haswell, haswellx, icelake, icelakex,
ivybridge, ivytown, jaketown, lunarlake, meteorlake, nehalemep,
nehalemex, rocketlake, sandybridge, sapphirerapids, sierraforest,
skylake, skylakex, snowridgex, tigerlake, westmereep-dp,
westmereep-sp, westmereep-sx
python support:
- Add support for event counts in the python binding, add a
counting.py example
perf list:
- Display the PMU name associated with a perf metric in JSON
perf test:
- Hybrid improvements for metric value validation test
- Fix LBR test by ignoring idle task
- Add AMD IBS sw filter ana d'ldlat' tests
- Add 'perf trace --summary-mode=cgroup' test
- Add tests for the various language symbol demanglers
Miscellaneous:
- Allow specifying the cpu an event will be tied using '-e
event/cpu=N/'
- Sync various headers with the kernel sources
- Add annotations to use clang's -Wthread-safety and fix some
problems it detected
- Make dump_stack() use perf's symbol resolution to provide better
backtraces
- Intel TPEBS support cleanups and fixes. TPEBS stands for Timed PEBS
(Precision Event-Based Sampling), that adds timing info, the
retirement latency of instructions
- Various memory allocation (some detected by ASAN) and reference
counting fixes
- Add a 8-byte aligned PERF_RECORD_COMPRESSED2 to replace
PERF_RECORD_COMPRESSED
- Skip unsupported event types in perf.data files, don't stop when
finding one
- Improve lookups using hashmaps and binary searches"
* tag 'perf-tools-for-v6.16-1-2025-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (206 commits)
perf callchain: Always populate the addr_location map when adding IP
perf lock contention: Reject more than 10ms delays for safety
perf trace: Set errpid to false for rseq and set_robust_list
perf symbol: Move demangling code out of symbol-elf.c
perf trace: Always print return value for syscalls returning a pid
perf script: Print PERF_AUX_FLAG_COLLISION flag
perf mem: Show absolute percent in mem_stat output
perf mem: Display sort order only if it's available
perf mem: Describe overhead calculation in brief
perf record: Fix incorrect --user-regs comments
Revert "perf thread: Ensure comm_lock held for comm_list"
perf test trace_summary: Skip --bpf-summary tests if no libbpf
perf test intel-pt: Skip jitdump test if no libelf
perf intel-tpebs: Avoid race when evlist is being deleted
perf test demangle-java: Don't segv if demangling fails
perf symbol: Fix use-after-free in filename__read_build_id
perf pmu: Avoid segv for missing name/alias_name in wildcarding
perf machine: Factor creating a "live" machine out of dwarf-unwind
perf test: Add AMD IBS sw filter test
perf mem: Count L2 HITM for c2c statistic
...
This commit doesn't fix any bug, it is just code cleanup. Use the
function format_dev_t instead of sprintf, because format_dev_t does the
same thing.
Remove the useless memset call.
An unsigned integer can take at most 10 digits, so extend the array size
to 22. (note that because the range of minor and major numbers is limited,
the size 16 could not be exceeded, thus this function couldn't write
beyond string end)
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When calling cifs_reconnect, before the connection to the
server is reestablished, the code today does a DNS resolution and
updates server->dstaddr.
However, this is not necessary for secondary channels. Secondary
channels use the interface list returned by the server to decide
which address to connect to. And that happens after tcon is reconnected
and server interfaces are requested.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
nfs_uuid_put() and nfs_close_local_fh() can race if a "struct
nfs_file_localio" is released at the same time that nfsd calls
nfs_localio_invalidate_clients().
It is important that neither of these functions completes after the
other has started looking at a given nfs_file_localio and before it
finishes.
If nfs_uuid_put() exits while nfs_close_local_fh() is closing ro_file
and rw_file it could return to __nfd_file_cache_purge() while some files
are still referenced so the purge may not succeed.
If nfs_close_local_fh() exits while nfsd_uuid_put() is still closing the
files then the "struct nfs_file_localio" could be freed while
nfsd_uuid_put() is still looking at it. This side is currently handled
by copying the pointers out of ro_file and rw_file before deleting from
the list in nfsd_uuid. We need to preserve this while ensuring that
nfsd_uuid_put() does wait for nfs_close_local_fh().
This patch use nfl->uuid and nfl->list to provide the required
interlock.
nfs_uuid_put() removes the nfs_file_localio from the list, then drops
locks and puts the two files, then reclaims the spinlock and sets
->nfs_uuid to NULL.
nfs_close_local_fh() operates in the reverse order, setting ->nfs_uuid
to NULL, then closing the files, then unlinking from the list.
If nfs_uuid_put() finds that ->nfs_uuid is already NULL, it waits for
the nfs_file_localio to be removed from the list. If
nfs_close_local_fh() find that it has already been unlinked it waits for
->nfs_uuid to become NULL. This ensure that one of the two tries to
close the files, but they each waits for the other.
As nfs_uuid_put() is making the list empty, change from a
list_for_each_safe loop to a while that always takes the first entry.
This makes the intent more clear.
Also don't move the list to a temporary local list as this would defeat
the guarantees required for the interlock.
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
Fuzzing hit another invalid pointer dereference due to the lack of
checking whether jffs2_prealloc_raw_node_refs() completed successfully.
Subsequent logic implies that the node refs have been allocated.
Handle that. The code is ready for propagating the error upwards.
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 5835 Comm: syz-executor145 Not tainted 5.10.234-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:jffs2_link_node_ref+0xac/0x690 fs/jffs2/nodelist.c:600
Call Trace:
jffs2_mark_erased_block fs/jffs2/erase.c:460 [inline]
jffs2_erase_pending_blocks+0x688/0x1860 fs/jffs2/erase.c:118
jffs2_garbage_collect_pass+0x638/0x1a00 fs/jffs2/gc.c:253
jffs2_reserve_space+0x3f4/0xad0 fs/jffs2/nodemgmt.c:167
jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362
jffs2_write_end+0x712/0x1110 fs/jffs2/file.c:302
generic_perform_write+0x2c2/0x500 mm/filemap.c:3347
__generic_file_write_iter+0x252/0x610 mm/filemap.c:3465
generic_file_write_iter+0xdb/0x230 mm/filemap.c:3497
call_write_iter include/linux/fs.h:2039 [inline]
do_iter_readv_writev+0x46d/0x750 fs/read_write.c:740
do_iter_write+0x18c/0x710 fs/read_write.c:866
vfs_writev+0x1db/0x6a0 fs/read_write.c:939
do_pwritev fs/read_write.c:1036 [inline]
__do_sys_pwritev fs/read_write.c:1083 [inline]
__se_sys_pwritev fs/read_write.c:1078 [inline]
__x64_sys_pwritev+0x235/0x310 fs/read_write.c:1078
do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 2f785402f39b ("[JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code.")
Fixes: f560928baa60 ("[JFFS2] Allocate node_ref for wasted space when skipping to page boundary")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>