tjh.dev
commits
Pull perf tools fixes from Namhyung Kim:
"Just a couple of build fixes on arm64"
* tag 'perf-tools-fixes-for-v6.15-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Fix in-source libperf build
perf tools: Fix arm64 build by generating unistd_64.h
Pull tracing fixes from Steven Rostedt:
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page.
But the buffer used in tracing_splice_read_pipe() only allocates a
page size. The data copied to the buffer is the amount in sub buffer
which can overflow the buffer.
Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the
amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer
level.
- Do not use the array in trace_adjust_address() if there are no
elements
The trace_adjust_address() finds the offset of a module that was
stored in the persistent buffer when reading the previous boot buffer
to see if the address belongs to a module that was loaded in the
previous boot. An array is created that matches currently loaded
modules with previously loaded modules. The trace_adjust_address()
uses that array to find the new offset of the address that's in the
previous buffer. But if no module was loaded, it ends up reading the
last element in an array that was never allocated.
Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events
list and requires the trace_event_sem semaphore held for read. But
this function is always called with that semaphore held for read.
Remove the taking of the semaphore and replace it with
lockdep_assert_held_read(&trace_event_sem)
* tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not take trace_event_sem in print_event_fields()
tracing: Fix trace_adjust_address() when there is no modules in scratch area
ftrace: Fix NULL memory allocation check
tracing: Fix oob write in trace_seq_to_buffer()
When libperf is built alone in-source, $(OUTPUT) isn't set. This causes
the generated uapi path to resolve to '/../arch' which results in a
permissions error:
mkdir: cannot create directory '/../arch': Permission denied
Fix it by removing the preceding '/..' which means that it gets
generated either in the tools/lib/perf part of the tree or the OUTPUT
folder. Some other rules that rely on OUTPUT further refine this
conditionally depending on whether it's an in-source or out-of-source
build, but I don't think we need the extra complexity here. And this
rule is slightly different to others because the header is needed by
both libperf and Perf. This is further complicated by the fact that Perf
always passes O=... to libperf even for in source builds, meaning that
OUTPUT isn't set consistently between projects.
Because we're no longer going one level up to try to generate the file
in the tools/ folder, Perf's include rule needs to descend into libperf.
Also fix the clean rule while we're here.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/linux-perf-users/7703f88e-ccb7-4c98-9da4-8aad224e780f@leemhuis.info/
Fixes: bfb713ea53c7 ("perf tools: Fix arm64 build by generating unistd_64.h")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/20250429-james-perf-fix-libperf-in-source-build-v1-1-a1a827ac15e5@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Pull parisc fix from Helge Deller:
"Fix a double SIGFPE crash"
* tag 'parisc-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix double SIGFPE crash
On some paths in print_event_fields() it takes the trace_event_sem for
read, even though it should always be held when the function is called.
Remove the taking of that mutex and add a lockdep_assert_held_read() to
make sure the trace_event_sem is held when print_event_fields() is called.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501224128.0b1f0571@batman.local.home
Fixes: 80a76994b2d88 ("tracing: Add "fields" option to show raw trace event fields")
Reported-by: syzbot+441582c1592938fccf09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6813ff5e.050a0220.14dd7d.001b.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since pulling in the kernel changes in commit 22f72088ffe6 ("tools
headers: Update the syscall table with the kernel sources"), arm64 is
no longer using a generic syscall header and generates one from the
syscall table. Therefore we must also generate the syscall header for
arm64 before building Perf.
Add it as a dependency to libperf which uses one syscall number. Perf
uses more, but as libperf is a dependency of Perf it will be generated
for both.
Future platforms that need this will have to add their own syscall-y
targets in libperf manually. Unfortunately the arch specific files that
do this (e.g. arch/arm64/include/asm/Kbuild) can't easily be imported
into the Perf build. But Perf only needs a subset of the generated files
anyway, so redefining them is probably the correct thing to do.
Fixes: 22f72088ffe6 ("tools headers: Update the syscall table with the kernel sources")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20250417-james-perf-fix-gen-syscall-v1-1-1d268c923901@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Pull EDAC fixes from Borislav Petkov:
- Test the correct structure member when handling correctable errors
and avoid spurious interrupts, in altera_edac
* tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Set DDR and SDMMC interrupt mask before registration
EDAC/altera: Test the correct error reg offset
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
root@parisc:~# cat fpe.c
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main() {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW);
return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}
root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
Floating point exception
root@parisc:~# strace -f ./a.out
execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
...
rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
+++ killed by SIGFPE +++
Floating point exception
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Reported-by: Camm Maguire <camm@maguirefamily.org>
Cc: stable@vger.kernel.org
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home
Fixes: 35a380ddbc653 ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull x86 fix from Ingo Molnar:
"Fix SEV-SNP memory acceptance from the EFI stub for guests
running at VMPL >0"
* tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
Mask DDR and SDMMC in probe function to avoid spurious interrupts before
registration. Removed invalid register write to system manager.
Fixes: 1166fde93d5b ("EDAC, altera: Add Arria10 ECC memory init functions")
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/20250425142640.33125-3-matthew.gerlach@altera.com
The check for a failed memory location is incorrectly checking
the wrong level of pointer indirection by checking !filter_hash
rather than !*filter_hash. Fix this.
Cc: asami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250422221335.89896-1-colin.i.king@gmail.com
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The C sequence points are complicated things, and gcc-15 has apparently
added a warning for the case where an object is both used and modified
multiple times within the same sequence point.
That's a great warning.
Or rather, it would be a great warning, except gcc-15 seems to not
really be very exact about it, and doesn't notice that the modification
are to two entirely different members of the same object: the array
counter and the array entries.
So that seems kind of silly.
That said, the code that gcc complains about is unnecessarily
complicated, so moving the array counter update into a separate
statement seems like the most straightforward fix for these warnings:
drivers/net/wireless/intel/iwlwifi/mld/d3.c: In function ‘iwl_mld_set_netdetect_info’:
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1102:66: error: operation on ‘netdetect_info->n_matches’ may be undefined [-Werror=sequence-point]
1102 | netdetect_info->matches[netdetect_info->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1120:58: error: operation on ‘match->n_channels’ may be undefined [-Werror=sequence-point]
1120 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
side note: the code at that second warning is actively buggy, and only
works on little-endian machines that don't do strict alignment checks.
The code casts an array of integers into an array of unsigned long in
order to use our bitmap iterators. That happens to work fine on any
sane architecture, but it's still wrong.
This does *not* fix that more serious problem. This only splits the two
assignments into two statements and fixes the compiler warning. I need
to get rid of the new warnings in order to be able to actually do any
build testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc perf fixes from Ingo Molnar:
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
* tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting
perf/x86/intel: Check the X86 leader for pebs_counter_event_group
perf/x86/intel: Only check the group flag for X86 leader
Commit:
d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
Test correct structure member, ecc_cecnt_offset, before using it.
[ bp: Massage commit message. ]
Fixes: 73bcc942f427 ("EDAC, altera: Add Arria10 EDAC support")
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/20250425142640.33125-2-matthew.gerlach@altera.com
Pull i2c fix from Wolfram Sang:
"Fix double free of irq in amd-mp2 driver"
* tag 'i2c-for-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: amd-mp2: drop free_irq() of devm_request_irq() allocated irq
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull irq fixes from Ingo Molnar:
- Prevent NULL pointer dereference in msi_domain_debug_show()
- Fix crash in the qcom-mpm irqchip driver when configuring
interrupts for non-wake GPIOs
* tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM.
Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Closes: https://lore.kernel.org/all/Z_VUswFkWiTYI0eD@do-x1carbon
Reported-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250426001355.1026530-1-seanjc@google.com
Pull x86 perf events fix from Ingo Molnar:
"Fix an information leak regression in the AMD IBS PMU code"
* tag 'perf-urgent-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/amd/ibs: Prevent leaking sensitive data to userspace
i2c-host-fixes for v6.14-rc8
amd-mp2: fix double free of irq.
This removes two cases of explicit NUL padding that now causes warnings
because of '-Wunterminated-string-initialization' being part of -Wextra
in gcc-15.
Gcc is being silly in this case when it says that it truncates a NUL
terminator, because in these cases there were _multiple_ NUL characters.
But we can get rid of the warning by just simplifying the two
initializers that trigger the warning for me, so this does exactly that.
I'm not sure why the power supply code did that odd
.attr_name = #_name "\0",
pattern: it was introduced in commit 2cabeaf15129 ("power: supply: core:
Cleanup power supply sysfs attribute list"), but that 'attr_name[]'
field is an explicitly sized character array in a statically initialized
variable, and a string initializer always has a terminating NUL _and_
statically initialized character arrays are zero-padded anyway, so it
really seems to be rather extraneous belt-and-suspenders.
The zero_uuid[16] initialization in drivers/md/bcache/super.c makes
perfect sense, but it isn't necessary for the same reasons, and not
worth the new gcc warning noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull arm64 fix from Catalin Marinas:
"Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise
is_midr_in_range_list() reads beyond the end of these arrays"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
The counter backwards may be observed in the PMI handler when
counters-snapshotting some non-precise events in the freq mode.
For the non-precise events, it's possible the counters-snapshotting
records a positive value for an overflowed PEBS event. Then the HW
auto-reload mechanism reset the counter to 0 immediately. Because the
pebs_event_reset is cleared in the freq mode, which doesn't set the
PERF_X86_EVENT_AUTO_RELOAD.
In the PMI handler, 0 will be read rather than the positive value
recorded in the counters-snapshotting record.
The counters-snapshotting case has to be specially handled. Since the
event value has been updated when processing the counters-snapshotting
record, only needs to set the new period for the counter via
x86_pmu_set_period().
Fixes: e02e9b0374c3 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-6-kan.liang@linux.intel.com
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
Pull keys fix from Jarkko Sakkinen:
"Fix potential use-after-free in key_put()"
* tag 'keys-next-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys: Fix UAF in key_put()
Although IBS "swfilt" can prevent leaking samples with kernel RIP to the
userspace, there are few subtle cases where a 'data' address and/or a
'branch target' address can fall under kernel address range although RIP
is from userspace. Prevent leaking kernel 'data' addresses by discarding
such samples when {exclude_kernel=1,swfilt=1}.
IBS can now be invoked by unprivileged user with the introduction of
"swfilt". However, this creates a loophole in the interface where an
unprivileged user can get physical address of the userspace virtual
addresses through IBS register raw dump (PERF_SAMPLE_RAW). Prevent this
as well.
This upstream commit fixed the most obvious leak:
65a99264f5e5 perf/x86: Check data address for IBS software filter
Follow that up with a more complete fix.
Fixes: d29e744c7167 ("perf/x86: Relax privilege filter restriction on AMD IBS")
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250321161251.1033-1-ravi.bangoria@amd.com
irq allocated with devm_request_irq() will be freed in devm_irq_release(),
using free_irq() in ->remove() will causes a dangling pointer, and a
subsequent double free. So remove the free_irq() in the error path and
remove path.
Fixes: 969864efae78 ("i2c: amd-mp2: use msix/msi if the hardware supports")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20221103121146.99836-1-yangyingliang@huawei.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
This is not great: I'd much rather introduce a typedef that is a "ACPI
name byte buffer", and use that to mark these special 4-byte ACPI names
that do not use NUL termination.
But as noted in the previous commit ("gcc-15: make 'unterminated string
initialization' just a warning") gcc doesn't actually seem to support
that notion, so instead you have to just mark every single array
declaration individually.
So this is not pretty, but this gets rid of the bulk of the annoying
warnings during an allmodconfig build for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i2c fix from Wolfram Sang:
- imx-lpi2c: fix clock error handling sequence in probe
* tag 'i2c-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx-lpi2c: Fix clock count when probe defers
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries.
Cc: Lee Jones <lee@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: <stable@vger.kernel.org>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
irq_domain_debug_show_one() calls msi_domain_debug_show() with a non-NULL
domain pointer and a NULL irq_data pointer. irq_debug_show_data() calls it
with a NULL domain pointer.
The domain pointer is not used, but the irq_data pointer is required to be
non-NULL and lacks a NULL pointer check.
Add the missing NULL pointer check to ensure there is a non-NULL irq_data
pointer in msi_domain_debug_show() before dereferencing it.
[ tglx: Massaged change log ]
Fixes: 01499ae673dc ("genirq/msi: Expose MSI message data in debugfs")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250430124836.49964-2-ajones@ventanamicro.com
The PEBS counters snapshotting group also requires a group flag in the
leader. The leader must be a X86 event.
Fixes: e02e9b0374c3 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-3-kan.liang@linux.intel.com
Pull nfsd fix from Chuck Lever:
- Revert a v6.15 patch due to a report of SELinux test failures
* tag 'nfsd-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "sunrpc: clean cache_detail immediately when flush is written frequently"
Commit a402006d48a9 ("misc: pci_endpoint_test: Remove global 'irq_type'
and 'no_msi'") changed so that the default IRQ vector requested by
pci_endpoint_test_probe() was no longer the module param 'irq_type', but
instead test->irq_type. test->irq_type is by default IRQ_TYPE_UNDEFINED
(until someone calls ioctl(PCITEST_SET_IRQTYPE)).
However, the commit also changed so that after initializing test->irq_type
to IRQ_TYPE_UNDEFINED, it also overrides it with driver_data->irq_type, if
the PCI device and vendor ID provides driver_data.
This causes a regression for PCI device and vendor IDs that do not provide
driver_data, and the host side pci_endpoint_test_driver driver failed to
probe on such platforms:
pci-endpoint-test 0001:01:00.0: Invalid IRQ type selected
pci-endpoint-test 0001:01:00.0: probe with driver pci-endpoint-test failed with error -22
Considering that the pci endpoint selftests and the old pcitest.sh always
call ioctl(PCITEST_SET_IRQTYPE) before performing any test that requires
IRQs, fix the regression by removing the allocation of IRQs in
pci_endpoint_test_probe(). The IRQ allocation will occur when
ioctl(PCITEST_SET_IRQTYPE) is called.
A positive side effect of this is that even if the endpoint controller has
issues with IRQs, the user can do still do all the tests/ioctls() that do
not require working IRQs, e.g. PCITEST_BAR and PCITEST_BARS.
This also means that we can remove the now unused irq_type from
driver_data. The irq_type will always be the one configured by the user
using ioctl(PCITEST_SET_IRQTYPE). (A user that does not know, or care
which irq_type that is used, can use PCITEST_IRQ_TYPE_AUTO. This has
superseded the need for a default irq_type in driver_data.)
[bhelgaas: add probe failure details]
Fixes: a402006d48a9c ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250416142825.336554-2-cassel@kernel.org
Pull io_uring fix from Jens Axboe:
"Just a single fix for the commit that went into your tree yesterday,
which exposed an issue with not always clearing notifications. That
could cause them to be used more than once"
* tag 'io_uring-6.14-20250322' of git://git.kernel.dk/linux:
io_uring/net: fix sendzc double notif flush
Once a key's reference count has been reduced to 0, the garbage collector
thread may destroy it at any time and so key_put() is not allowed to touch
the key after that point. The most key_put() is normally allowed to do is
to touch key_gc_work as that's a static global variable.
However, in an effort to speed up the reclamation of quota, this is now
done in key_put() once the key's usage is reduced to 0 - but now the code
is looking at the key after the deadline, which is forbidden.
Fix this by using a flag to indicate that a key can be gc'd now rather than
looking at the key's refcount in the garbage collector.
Fixes: 9578e327b2b4 ("keys: update key quotas in key_put()")
Reported-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673b6aec.050a0220.87769.004a.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pull x86 perf events fixes from Ingo Molnar:
"Two fixes: an RAPL PMU driver error handling fix, and an AMD IBS
software filter fix"
* tag 'perf-urgent-2025-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix error handling in init_rapl_pmus()
perf/x86: Check data address for IBS software filter
Pull media fix from Mauro Carvalho Chehab:
"rtl2832 driver regression fix"
* tag 'media/v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rtl2832_sdr: assign vb2 lock before vb2_queue_init
gcc-15 enabling -Wunterminated-string-initialization in -Wextra by
default was done with the best intentions, but the warning is still
quite broken.
What annoys me about the warning is that this is a very traditional AND
CORRECT way to initialize fixed byte arrays in C:
unsigned char hex[16] = "0123456789abcdef";
and we use this all over the kernel. And the warning is fine, but gcc
developers apparently never made a reasonable way to disable it. As is
(sadly) tradition with these things.
Yes, there's "__attribute__((nonstring))", and we have a macro to make
that absolutely disgusting syntax more palatable (ie the kernel syntax
for that monstrosity is just "__nonstring").
But that attribute is misdesigned. What you'd typically want to do is
tell the compiler that you are using a type that isn't a string but a
byte array, but that doesn't work at all:
warning: ‘nonstring’ attribute does not apply to types [-Wattributes]
and because of this fundamental mis-design, you then have to mark each
instance of that pattern.
This is particularly noticeable in our ACPI code, because ACPI has this
notion of a 4-byte "type name" that gets used all over, and is exactly
this kind of byte array.
This is a sad oversight, because the warning is useful, but really would
be so much better if gcc had also given a sane way to indicate that we
really just want a byte array type at a type level, not the broken "each
and every array definition" level.
So now instead of creating a nice "ACPI name" type using something like
typedef char acpi_name_t[4] __nonstring;
we have to do things like
char name[ACPI_NAMESEG_SIZE] __nonstring;
in every place that uses this concept and then happens to have the
typical initializers.
This is annoying me mainly because I think the warning _is_ a good
warning, which is why I'm not just turning it off in disgust. But it is
hampered by this bad implementation detail.
[ And obviously I'm doing this now because system upgrades for me are
something that happen in the middle of the release cycle: don't do it
before or during travel, or just before or during the busy merge
window period. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
i2c-host-fixes for v6.15-rc5
- imx-lpi2c: fix error handling sequence in probe
A warning in intel_pmu_lbr_counters_reorder() may be triggered by below
perf command.
perf record -e "{cpu-clock,cycles/call-graph="lbr"/}" -- sleep 1
It's because the group is mistakenly treated as a branch counter group.
The hw.flags of the leader are used to determine whether a group is a
branch counters group. However, the hw.flags is only available for a
hardware event. The field to store the flags is a union type. For a
software event, it's a hrtimer. The corresponding bit may be set if the
leader is a software event.
For a branch counter group and other groups that have a group flag
(e.g., topdown, PEBS counters snapshotting, and ACR), the leader must
be a X86 event. Check the X86 event before checking the flag.
The patch only fixes the issue for the branch counter group.
The following patch will fix the other groups.
There may be an alternative way to fix the issue by moving the hw.flags
out of the union type. It should work for now. But it's still possible
that the flags will be used by other types of events later. As long as
that type of event is used as a leader, a similar issue will be
triggered. So the alternative way is dropped.
Fixes: 33744916196b ("perf/x86/intel: Support branch counters logging")
Closes: https://lore.kernel.org/lkml/20250412091423.1839809-1-luogengkun@huaweicloud.com/
Reported-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250424134718.311934-2-kan.liang@linux.intel.com
Pull misc x86 fixes from Ingo Molnar:
- Fix 32-bit kernel boot crash if passed physical memory with more than
32 address bits
- Fix Xen PV crash
- Work around build bug in certain limited build environments
- Fix CTEST instruction decoding in insn_decoder_test
* tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix CTEST instruction decoding
x86/boot: Work around broken busybox 'truncate' tool
x86/mm: Fix _pgd_alloc() for Xen PV mode
x86/e820: Discard high memory that can't be addressed by 32-bit systems
Ondrej reports that certain SELinux tests are failing after commit
fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is
written frequently"), merged during the v6.15 merge window.
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Fixes: fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I'm currently maintaining the PCI endpoint subsystem and reviewing the
native host bridge and endpoint drivers. However, this affects my endpoint
maintainership role since I cannot merge endpoint patches that depend on
the controller drivers (which is more common). Moreover, the controller
driver patches would also benefit from a helping hand in maintaining them.
So I'd like to step up to maintain the native host bridge and endpoint
drivers together with the endpoint subsystem.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250418094905.9983-1-manivannan.sadhasivam@linaro.org
Pull spi fix from Mark Brown:
"This is a straightforward fix for a reference count leak in the rarely
used SPI device mode functionality"
* tag 'spi-fix-v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix reference count leak in slave_show()
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 5823 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
Call Trace:
<TASK>
io_notif_flush io_uring/notif.h:40 [inline]
io_send_zc_cleanup+0x121/0x170 io_uring/net.c:1222
io_clean_op+0x58c/0x9a0 io_uring/io_uring.c:406
io_free_batch_list io_uring/io_uring.c:1429 [inline]
__io_submit_flush_completions+0xc16/0xd20 io_uring/io_uring.c:1470
io_submit_flush_completions io_uring/io_uring.h:159 [inline]
Before the blamed commit, sendzc relied on io_req_msg_cleanup() to clear
REQ_F_NEED_CLEANUP, so after the following snippet the request will
never hit the core io_uring cleanup path.
io_notif_flush();
io_req_msg_cleanup();
The easiest fix is to null the notification. io_send_zc_cleanup() can
still be called after, but it's tolerated.
Reported-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Tested-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Fixes: cc34d8330e036 ("io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e1306007458b8891c88c4f20c966a17595f766b0.1742643795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull scheduler fix from Ingo Molnar:
"Revert a scheduler performance optimization that regressed other
workloads"
* tag 'sched-urgent-2025-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "sched/core: Reduce cost of sched_move_task when config autogroup"
If init_rapl_pmu() fails while allocating memory for "rapl_pmu" objects,
we miss freeing the "rapl_pmus" object in the error path. Fix that.
Fixes: 9b99d65c0bb4 ("perf/x86/rapl: Move the pmu allocation out of CPU hotplug")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250320100617.4480-1-dhananjay.ugwekar@amd.com
Pull i2c fixes from Wolfram Sang:
- omap: fix irq ACKS to avoid irq storming and system hang
- ali1535, ali15x3, sis630: fix error path at probe exit
* tag 'i2c-for-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sis630: Fix an error handling path in sis630_probe()
i2c: ali15x3: Fix an error handling path in ali15x3_probe()
i2c: ali1535: Fix an error handling path in ali1535_probe()
i2c: omap: fix IRQ storms
Pull tracing fixes from Steven Rostedt:
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page.
But the buffer used in tracing_splice_read_pipe() only allocates a
page size. The data copied to the buffer is the amount in sub buffer
which can overflow the buffer.
Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the
amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer
level.
- Do not use the array in trace_adjust_address() if there are no
elements
The trace_adjust_address() finds the offset of a module that was
stored in the persistent buffer when reading the previous boot buffer
to see if the address belongs to a module that was loaded in the
previous boot. An array is created that matches currently loaded
modules with previously loaded modules. The trace_adjust_address()
uses that array to find the new offset of the address that's in the
previous buffer. But if no module was loaded, it ends up reading the
last element in an array that was never allocated.
Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events
list and requires the trace_event_sem semaphore held for read. But
this function is always called with that semaphore held for read.
Remove the taking of the semaphore and replace it with
lockdep_assert_held_read(&trace_event_sem)
* tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not take trace_event_sem in print_event_fields()
tracing: Fix trace_adjust_address() when there is no modules in scratch area
ftrace: Fix NULL memory allocation check
tracing: Fix oob write in trace_seq_to_buffer()
When libperf is built alone in-source, $(OUTPUT) isn't set. This causes
the generated uapi path to resolve to '/../arch' which results in a
permissions error:
mkdir: cannot create directory '/../arch': Permission denied
Fix it by removing the preceding '/..' which means that it gets
generated either in the tools/lib/perf part of the tree or the OUTPUT
folder. Some other rules that rely on OUTPUT further refine this
conditionally depending on whether it's an in-source or out-of-source
build, but I don't think we need the extra complexity here. And this
rule is slightly different to others because the header is needed by
both libperf and Perf. This is further complicated by the fact that Perf
always passes O=... to libperf even for in source builds, meaning that
OUTPUT isn't set consistently between projects.
Because we're no longer going one level up to try to generate the file
in the tools/ folder, Perf's include rule needs to descend into libperf.
Also fix the clean rule while we're here.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/linux-perf-users/7703f88e-ccb7-4c98-9da4-8aad224e780f@leemhuis.info/
Fixes: bfb713ea53c7 ("perf tools: Fix arm64 build by generating unistd_64.h")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/20250429-james-perf-fix-libperf-in-source-build-v1-1-a1a827ac15e5@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Pull parisc fix from Helge Deller:
"Fix a double SIGFPE crash"
* tag 'parisc-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix double SIGFPE crash
On some paths in print_event_fields() it takes the trace_event_sem for
read, even though it should always be held when the function is called.
Remove the taking of that mutex and add a lockdep_assert_held_read() to
make sure the trace_event_sem is held when print_event_fields() is called.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501224128.0b1f0571@batman.local.home
Fixes: 80a76994b2d88 ("tracing: Add "fields" option to show raw trace event fields")
Reported-by: syzbot+441582c1592938fccf09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6813ff5e.050a0220.14dd7d.001b.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since pulling in the kernel changes in commit 22f72088ffe6 ("tools
headers: Update the syscall table with the kernel sources"), arm64 is
no longer using a generic syscall header and generates one from the
syscall table. Therefore we must also generate the syscall header for
arm64 before building Perf.
Add it as a dependency to libperf which uses one syscall number. Perf
uses more, but as libperf is a dependency of Perf it will be generated
for both.
Future platforms that need this will have to add their own syscall-y
targets in libperf manually. Unfortunately the arch specific files that
do this (e.g. arch/arm64/include/asm/Kbuild) can't easily be imported
into the Perf build. But Perf only needs a subset of the generated files
anyway, so redefining them is probably the correct thing to do.
Fixes: 22f72088ffe6 ("tools headers: Update the syscall table with the kernel sources")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20250417-james-perf-fix-gen-syscall-v1-1-1d268c923901@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Pull EDAC fixes from Borislav Petkov:
- Test the correct structure member when handling correctable errors
and avoid spurious interrupts, in altera_edac
* tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Set DDR and SDMMC interrupt mask before registration
EDAC/altera: Test the correct error reg offset
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
root@parisc:~# cat fpe.c
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main() {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW);
return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}
root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
Floating point exception
root@parisc:~# strace -f ./a.out
execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
...
rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
+++ killed by SIGFPE +++
Floating point exception
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Reported-by: Camm Maguire <camm@maguirefamily.org>
Cc: stable@vger.kernel.org
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home
Fixes: 35a380ddbc653 ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Mask DDR and SDMMC in probe function to avoid spurious interrupts before
registration. Removed invalid register write to system manager.
Fixes: 1166fde93d5b ("EDAC, altera: Add Arria10 ECC memory init functions")
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/20250425142640.33125-3-matthew.gerlach@altera.com
The check for a failed memory location is incorrectly checking
the wrong level of pointer indirection by checking !filter_hash
rather than !*filter_hash. Fix this.
Cc: asami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250422221335.89896-1-colin.i.king@gmail.com
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The C sequence points are complicated things, and gcc-15 has apparently
added a warning for the case where an object is both used and modified
multiple times within the same sequence point.
That's a great warning.
Or rather, it would be a great warning, except gcc-15 seems to not
really be very exact about it, and doesn't notice that the modification
are to two entirely different members of the same object: the array
counter and the array entries.
So that seems kind of silly.
That said, the code that gcc complains about is unnecessarily
complicated, so moving the array counter update into a separate
statement seems like the most straightforward fix for these warnings:
drivers/net/wireless/intel/iwlwifi/mld/d3.c: In function ‘iwl_mld_set_netdetect_info’:
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1102:66: error: operation on ‘netdetect_info->n_matches’ may be undefined [-Werror=sequence-point]
1102 | netdetect_info->matches[netdetect_info->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1120:58: error: operation on ‘match->n_channels’ may be undefined [-Werror=sequence-point]
1120 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
side note: the code at that second warning is actively buggy, and only
works on little-endian machines that don't do strict alignment checks.
The code casts an array of integers into an array of unsigned long in
order to use our bitmap iterators. That happens to work fine on any
sane architecture, but it's still wrong.
This does *not* fix that more serious problem. This only splits the two
assignments into two statements and fixes the compiler warning. I need
to get rid of the new warnings in order to be able to actually do any
build testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc perf fixes from Ingo Molnar:
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
* tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting
perf/x86/intel: Check the X86 leader for pebs_counter_event_group
perf/x86/intel: Only check the group flag for X86 leader
Commit:
d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
Test correct structure member, ecc_cecnt_offset, before using it.
[ bp: Massage commit message. ]
Fixes: 73bcc942f427 ("EDAC, altera: Add Arria10 EDAC support")
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/20250425142640.33125-2-matthew.gerlach@altera.com
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull irq fixes from Ingo Molnar:
- Prevent NULL pointer dereference in msi_domain_debug_show()
- Fix crash in the qcom-mpm irqchip driver when configuring
interrupts for non-wake GPIOs
* tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM.
Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Closes: https://lore.kernel.org/all/Z_VUswFkWiTYI0eD@do-x1carbon
Reported-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250426001355.1026530-1-seanjc@google.com
This removes two cases of explicit NUL padding that now causes warnings
because of '-Wunterminated-string-initialization' being part of -Wextra
in gcc-15.
Gcc is being silly in this case when it says that it truncates a NUL
terminator, because in these cases there were _multiple_ NUL characters.
But we can get rid of the warning by just simplifying the two
initializers that trigger the warning for me, so this does exactly that.
I'm not sure why the power supply code did that odd
.attr_name = #_name "\0",
pattern: it was introduced in commit 2cabeaf15129 ("power: supply: core:
Cleanup power supply sysfs attribute list"), but that 'attr_name[]'
field is an explicitly sized character array in a statically initialized
variable, and a string initializer always has a terminating NUL _and_
statically initialized character arrays are zero-padded anyway, so it
really seems to be rather extraneous belt-and-suspenders.
The zero_uuid[16] initialization in drivers/md/bcache/super.c makes
perfect sense, but it isn't necessary for the same reasons, and not
worth the new gcc warning noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull arm64 fix from Catalin Marinas:
"Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise
is_midr_in_range_list() reads beyond the end of these arrays"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
The counter backwards may be observed in the PMI handler when
counters-snapshotting some non-precise events in the freq mode.
For the non-precise events, it's possible the counters-snapshotting
records a positive value for an overflowed PEBS event. Then the HW
auto-reload mechanism reset the counter to 0 immediately. Because the
pebs_event_reset is cleared in the freq mode, which doesn't set the
PERF_X86_EVENT_AUTO_RELOAD.
In the PMI handler, 0 will be read rather than the positive value
recorded in the counters-snapshotting record.
The counters-snapshotting case has to be specially handled. Since the
event value has been updated when processing the counters-snapshotting
record, only needs to set the new period for the counter via
x86_pmu_set_period().
Fixes: e02e9b0374c3 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-6-kan.liang@linux.intel.com
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
Although IBS "swfilt" can prevent leaking samples with kernel RIP to the
userspace, there are few subtle cases where a 'data' address and/or a
'branch target' address can fall under kernel address range although RIP
is from userspace. Prevent leaking kernel 'data' addresses by discarding
such samples when {exclude_kernel=1,swfilt=1}.
IBS can now be invoked by unprivileged user with the introduction of
"swfilt". However, this creates a loophole in the interface where an
unprivileged user can get physical address of the userspace virtual
addresses through IBS register raw dump (PERF_SAMPLE_RAW). Prevent this
as well.
This upstream commit fixed the most obvious leak:
65a99264f5e5 perf/x86: Check data address for IBS software filter
Follow that up with a more complete fix.
Fixes: d29e744c7167 ("perf/x86: Relax privilege filter restriction on AMD IBS")
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250321161251.1033-1-ravi.bangoria@amd.com
irq allocated with devm_request_irq() will be freed in devm_irq_release(),
using free_irq() in ->remove() will causes a dangling pointer, and a
subsequent double free. So remove the free_irq() in the error path and
remove path.
Fixes: 969864efae78 ("i2c: amd-mp2: use msix/msi if the hardware supports")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20221103121146.99836-1-yangyingliang@huawei.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
This is not great: I'd much rather introduce a typedef that is a "ACPI
name byte buffer", and use that to mark these special 4-byte ACPI names
that do not use NUL termination.
But as noted in the previous commit ("gcc-15: make 'unterminated string
initialization' just a warning") gcc doesn't actually seem to support
that notion, so instead you have to just mark every single array
declaration individually.
So this is not pretty, but this gets rid of the bulk of the annoying
warnings during an allmodconfig build for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries.
Cc: Lee Jones <lee@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: <stable@vger.kernel.org>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
irq_domain_debug_show_one() calls msi_domain_debug_show() with a non-NULL
domain pointer and a NULL irq_data pointer. irq_debug_show_data() calls it
with a NULL domain pointer.
The domain pointer is not used, but the irq_data pointer is required to be
non-NULL and lacks a NULL pointer check.
Add the missing NULL pointer check to ensure there is a non-NULL irq_data
pointer in msi_domain_debug_show() before dereferencing it.
[ tglx: Massaged change log ]
Fixes: 01499ae673dc ("genirq/msi: Expose MSI message data in debugfs")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250430124836.49964-2-ajones@ventanamicro.com
The PEBS counters snapshotting group also requires a group flag in the
leader. The leader must be a X86 event.
Fixes: e02e9b0374c3 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-3-kan.liang@linux.intel.com
Commit a402006d48a9 ("misc: pci_endpoint_test: Remove global 'irq_type'
and 'no_msi'") changed so that the default IRQ vector requested by
pci_endpoint_test_probe() was no longer the module param 'irq_type', but
instead test->irq_type. test->irq_type is by default IRQ_TYPE_UNDEFINED
(until someone calls ioctl(PCITEST_SET_IRQTYPE)).
However, the commit also changed so that after initializing test->irq_type
to IRQ_TYPE_UNDEFINED, it also overrides it with driver_data->irq_type, if
the PCI device and vendor ID provides driver_data.
This causes a regression for PCI device and vendor IDs that do not provide
driver_data, and the host side pci_endpoint_test_driver driver failed to
probe on such platforms:
pci-endpoint-test 0001:01:00.0: Invalid IRQ type selected
pci-endpoint-test 0001:01:00.0: probe with driver pci-endpoint-test failed with error -22
Considering that the pci endpoint selftests and the old pcitest.sh always
call ioctl(PCITEST_SET_IRQTYPE) before performing any test that requires
IRQs, fix the regression by removing the allocation of IRQs in
pci_endpoint_test_probe(). The IRQ allocation will occur when
ioctl(PCITEST_SET_IRQTYPE) is called.
A positive side effect of this is that even if the endpoint controller has
issues with IRQs, the user can do still do all the tests/ioctls() that do
not require working IRQs, e.g. PCITEST_BAR and PCITEST_BARS.
This also means that we can remove the now unused irq_type from
driver_data. The irq_type will always be the one configured by the user
using ioctl(PCITEST_SET_IRQTYPE). (A user that does not know, or care
which irq_type that is used, can use PCITEST_IRQ_TYPE_AUTO. This has
superseded the need for a default irq_type in driver_data.)
[bhelgaas: add probe failure details]
Fixes: a402006d48a9c ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250416142825.336554-2-cassel@kernel.org
Pull io_uring fix from Jens Axboe:
"Just a single fix for the commit that went into your tree yesterday,
which exposed an issue with not always clearing notifications. That
could cause them to be used more than once"
* tag 'io_uring-6.14-20250322' of git://git.kernel.dk/linux:
io_uring/net: fix sendzc double notif flush
Once a key's reference count has been reduced to 0, the garbage collector
thread may destroy it at any time and so key_put() is not allowed to touch
the key after that point. The most key_put() is normally allowed to do is
to touch key_gc_work as that's a static global variable.
However, in an effort to speed up the reclamation of quota, this is now
done in key_put() once the key's usage is reduced to 0 - but now the code
is looking at the key after the deadline, which is forbidden.
Fix this by using a flag to indicate that a key can be gc'd now rather than
looking at the key's refcount in the garbage collector.
Fixes: 9578e327b2b4 ("keys: update key quotas in key_put()")
Reported-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673b6aec.050a0220.87769.004a.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pull x86 perf events fixes from Ingo Molnar:
"Two fixes: an RAPL PMU driver error handling fix, and an AMD IBS
software filter fix"
* tag 'perf-urgent-2025-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix error handling in init_rapl_pmus()
perf/x86: Check data address for IBS software filter
gcc-15 enabling -Wunterminated-string-initialization in -Wextra by
default was done with the best intentions, but the warning is still
quite broken.
What annoys me about the warning is that this is a very traditional AND
CORRECT way to initialize fixed byte arrays in C:
unsigned char hex[16] = "0123456789abcdef";
and we use this all over the kernel. And the warning is fine, but gcc
developers apparently never made a reasonable way to disable it. As is
(sadly) tradition with these things.
Yes, there's "__attribute__((nonstring))", and we have a macro to make
that absolutely disgusting syntax more palatable (ie the kernel syntax
for that monstrosity is just "__nonstring").
But that attribute is misdesigned. What you'd typically want to do is
tell the compiler that you are using a type that isn't a string but a
byte array, but that doesn't work at all:
warning: ‘nonstring’ attribute does not apply to types [-Wattributes]
and because of this fundamental mis-design, you then have to mark each
instance of that pattern.
This is particularly noticeable in our ACPI code, because ACPI has this
notion of a 4-byte "type name" that gets used all over, and is exactly
this kind of byte array.
This is a sad oversight, because the warning is useful, but really would
be so much better if gcc had also given a sane way to indicate that we
really just want a byte array type at a type level, not the broken "each
and every array definition" level.
So now instead of creating a nice "ACPI name" type using something like
typedef char acpi_name_t[4] __nonstring;
we have to do things like
char name[ACPI_NAMESEG_SIZE] __nonstring;
in every place that uses this concept and then happens to have the
typical initializers.
This is annoying me mainly because I think the warning _is_ a good
warning, which is why I'm not just turning it off in disgust. But it is
hampered by this bad implementation detail.
[ And obviously I'm doing this now because system upgrades for me are
something that happen in the middle of the release cycle: don't do it
before or during travel, or just before or during the busy merge
window period. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
A warning in intel_pmu_lbr_counters_reorder() may be triggered by below
perf command.
perf record -e "{cpu-clock,cycles/call-graph="lbr"/}" -- sleep 1
It's because the group is mistakenly treated as a branch counter group.
The hw.flags of the leader are used to determine whether a group is a
branch counters group. However, the hw.flags is only available for a
hardware event. The field to store the flags is a union type. For a
software event, it's a hrtimer. The corresponding bit may be set if the
leader is a software event.
For a branch counter group and other groups that have a group flag
(e.g., topdown, PEBS counters snapshotting, and ACR), the leader must
be a X86 event. Check the X86 event before checking the flag.
The patch only fixes the issue for the branch counter group.
The following patch will fix the other groups.
There may be an alternative way to fix the issue by moving the hw.flags
out of the union type. It should work for now. But it's still possible
that the flags will be used by other types of events later. As long as
that type of event is used as a leader, a similar issue will be
triggered. So the alternative way is dropped.
Fixes: 33744916196b ("perf/x86/intel: Support branch counters logging")
Closes: https://lore.kernel.org/lkml/20250412091423.1839809-1-luogengkun@huaweicloud.com/
Reported-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250424134718.311934-2-kan.liang@linux.intel.com
Pull misc x86 fixes from Ingo Molnar:
- Fix 32-bit kernel boot crash if passed physical memory with more than
32 address bits
- Fix Xen PV crash
- Work around build bug in certain limited build environments
- Fix CTEST instruction decoding in insn_decoder_test
* tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix CTEST instruction decoding
x86/boot: Work around broken busybox 'truncate' tool
x86/mm: Fix _pgd_alloc() for Xen PV mode
x86/e820: Discard high memory that can't be addressed by 32-bit systems
Ondrej reports that certain SELinux tests are failing after commit
fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is
written frequently"), merged during the v6.15 merge window.
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Fixes: fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I'm currently maintaining the PCI endpoint subsystem and reviewing the
native host bridge and endpoint drivers. However, this affects my endpoint
maintainership role since I cannot merge endpoint patches that depend on
the controller drivers (which is more common). Moreover, the controller
driver patches would also benefit from a helping hand in maintaining them.
So I'd like to step up to maintain the native host bridge and endpoint
drivers together with the endpoint subsystem.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250418094905.9983-1-manivannan.sadhasivam@linaro.org
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 5823 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
Call Trace:
<TASK>
io_notif_flush io_uring/notif.h:40 [inline]
io_send_zc_cleanup+0x121/0x170 io_uring/net.c:1222
io_clean_op+0x58c/0x9a0 io_uring/io_uring.c:406
io_free_batch_list io_uring/io_uring.c:1429 [inline]
__io_submit_flush_completions+0xc16/0xd20 io_uring/io_uring.c:1470
io_submit_flush_completions io_uring/io_uring.h:159 [inline]
Before the blamed commit, sendzc relied on io_req_msg_cleanup() to clear
REQ_F_NEED_CLEANUP, so after the following snippet the request will
never hit the core io_uring cleanup path.
io_notif_flush();
io_req_msg_cleanup();
The easiest fix is to null the notification. io_send_zc_cleanup() can
still be called after, but it's tolerated.
Reported-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Tested-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Fixes: cc34d8330e036 ("io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e1306007458b8891c88c4f20c966a17595f766b0.1742643795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If init_rapl_pmu() fails while allocating memory for "rapl_pmu" objects,
we miss freeing the "rapl_pmus" object in the error path. Fix that.
Fixes: 9b99d65c0bb4 ("perf/x86/rapl: Move the pmu allocation out of CPU hotplug")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250320100617.4480-1-dhananjay.ugwekar@amd.com
Pull i2c fixes from Wolfram Sang:
- omap: fix irq ACKS to avoid irq storming and system hang
- ali1535, ali15x3, sis630: fix error path at probe exit
* tag 'i2c-for-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sis630: Fix an error handling path in sis630_probe()
i2c: ali15x3: Fix an error handling path in ali15x3_probe()
i2c: ali1535: Fix an error handling path in ali1535_probe()
i2c: omap: fix IRQ storms