tjh.dev
commits
This is kind of last-minute, but Al Viro reported that the new
FOP_DONTCACHE flag causes memory corruption due to use-after-free
issues.
This was triggered by commit 974c5e6139db ("xfs: flag as supporting
FOP_DONTCACHE"), but that is not the underlying bug - it is just the
first user of the flag.
Vlastimil Babka suspects the underlying problem stems from the
folio_end_writeback() logic introduced in commit fb7d3bc414939
("mm/filemap: drop streaming/uncached pages when writeback completes").
The most straightforward fix would be to just revert the commit that
exposed this, but Matthew Wilcox points out that other filesystems are
also starting to enable the FOP_DONTCACHE logic, so this instead
disables that bit globally for now.
The fix will hopefully end up being trivial and we can just re-enable
this logic after more testing, but until such a time we'll have to
disable the new FOP_DONTCACHE flag.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20250525083209.GS2023217@ZenIV/
Triggered-by: 974c5e6139db ("xfs: flag as supporting FOP_DONTCACHE")
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull hotfixes from Andrew Morton:
"22 hotfixes.
13 are cc:stable and the remainder address post-6.14 issues or aren't
considered necessary for -stable kernels. 19 are for MM"
* tag 'mm-hotfixes-stable-2025-05-25-00-58' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mailmap: add Jarkko's employer email address
mm: fix copy_vma() error handling for hugetlb mappings
memcg: always call cond_resched() after fn()
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
mm: vmalloc: only zero-init on vrealloc shrink
mm: vmalloc: actually use the in-place vrealloc region
alloc_tag: allocate percpu counters for module tags dynamically
module: release codetag section when module load fails
mm/cma: make detection of highmem_start more robust
MAINTAINERS: add mm memory policy section
MAINTAINERS: add mm ksm section
kasan: avoid sleepable page allocation from atomic context
highmem: add folio_test_partial_kmap()
MAINTAINERS: add hung-task detector section
taskstats: fix struct taskstats breaks backward compatibility since version 15
mm/truncate: fix out-of-bounds when doing a right-aligned split
MAINTAINERS: add mm reclaim section
MAINTAINERS: update page allocator section
mm: fix VM_UFFD_MINOR == VM_SHADOW_STACK on USERFAULTFD=y && ARM64_GCS=y
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE only if THP is enabled
...
Pull input fixes from Dmitry Torokhov:
- even more Xbox controllers added to xpad driver: Turtle Beach Recon
Wired Controller, Turtle Beach Stealth Ultra, and PowerA Wired
Controller
- a fix to Synaptics RMI driver to not crash if controller reports
unsupported version of F34 (firmware flash) function
* tag 'input-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi - fix crash with unsupported versions of F34
Input: xpad - add more controllers
Add the current employer email address to mailmap.
Link: https://lkml.kernel.org/r/20250523121105.15850-1-jarkko@kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Antonio Quartulli <antonio@openvpn.net>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull spi fixes from Mark Brown:
"A few final fixes for v6.15, some driver fixes for the Freescale DSPI
driver pulled over from their vendor code and another instance of the
fixes Greg has been sending throughout the kernel for constification
of the bus_type in driver core match() functions"
* tag 'spi-fix-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: Reset SR flags before sending a new message
spi: spi-fsl-dspi: Halt the module after a new message transfer
spi: spi-fsl-dspi: restrict register range for regmap access
spi: use container_of_cont() for to_spi_device()
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de>
Fixes: 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If, during a mremap() operation for a hugetlb-backed memory mapping,
copy_vma() fails after the source vma has been duplicated and opened (ie.
vma_link() fails), the error is handled by closing the new vma. This
updates the hugetlbfs reservation counter of the reservation map which at
this point is referenced by both the source vma and the new copy. As a
result, once the new vma has been freed and copy_vma() returns, the
reservation counter for the source vma will be incorrect.
This patch addresses this corner case by clearing the hugetlb private page
reservation reference for the new vma and decrementing the reference
before closing the vma, so that vma_close() won't update the reservation
counter. This is also what copy_vma_and_data() does with the source vma
if copy_vma() succeeds, so a helper function has been added to do the
fixup in both functions.
The issue was reported by a private syzbot instance and can be reproduced
using the C reproducer in [1]. It's also a possible duplicate of public
syzbot report [2]. The WARNING report is:
============================================================
page_counter underflow: -1024 nr_pages=1024
WARNING: CPU: 0 PID: 3287 at mm/page_counter.c:61 page_counter_cancel+0xf6/0x120
Modules linked in:
CPU: 0 UID: 0 PID: 3287 Comm: repro__WARNING_ Not tainted 6.15.0-rc7+ #54 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:page_counter_cancel+0xf6/0x120
Code: ff 5b 41 5e 41 5f 5d c3 cc cc cc cc e8 f3 4f 8f ff c6 05 64 01 27 06 01 48 c7 c7 60 15 f8 85 48 89 de 4c 89 fa e8 2a a7 51 ff <0f> 0b e9 66 ff ff ff 44 89 f9 80 e1 07 38 c1 7c 9d 4c 81
RSP: 0018:ffffc900025df6a0 EFLAGS: 00010246
RAX: 2edfc409ebb44e00 RBX: fffffffffffffc00 RCX: ffff8880155f0000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff81c4a23c R09: 1ffff1100330482a
R10: dffffc0000000000 R11: ffffed100330482b R12: 0000000000000000
R13: ffff888058a882c0 R14: ffff888058a882c0 R15: 0000000000000400
FS: 0000000000000000(0000) GS:ffff88808fc53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b33e0 CR3: 00000000076d6000 CR4: 00000000000006f0
Call Trace:
<TASK>
page_counter_uncharge+0x33/0x80
hugetlb_cgroup_uncharge_counter+0xcb/0x120
hugetlb_vm_op_close+0x579/0x960
? __pfx_hugetlb_vm_op_close+0x10/0x10
remove_vma+0x88/0x130
exit_mmap+0x71e/0xe00
? __pfx_exit_mmap+0x10/0x10
? __mutex_unlock_slowpath+0x22e/0x7f0
? __pfx_exit_aio+0x10/0x10
? __up_read+0x256/0x690
? uprobe_clear_state+0x274/0x290
? mm_update_next_owner+0xa9/0x810
__mmput+0xc9/0x370
exit_mm+0x203/0x2f0
? __pfx_exit_mm+0x10/0x10
? taskstats_exit+0x32b/0xa60
do_exit+0x921/0x2740
? do_raw_spin_lock+0x155/0x3b0
? __pfx_do_exit+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0xc5/0x100
do_group_exit+0x20c/0x2c0
get_signal+0x168c/0x1720
? __pfx_get_signal+0x10/0x10
? schedule+0x165/0x360
arch_do_signal_or_restart+0x8e/0x7d0
? __pfx_arch_do_signal_or_restart+0x10/0x10
? __pfx___se_sys_futex+0x10/0x10
syscall_exit_to_user_mode+0xb8/0x2c0
do_syscall_64+0x75/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x422dcd
Code: Unable to access opcode bytes at 0x422da3.
RSP: 002b:00007ff266cdb208 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00007ff266cdbcdc RCX: 0000000000422dcd
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004c7bec
RBP: 00007ff266cdb220 R08: 203a6362696c6720 R09: 203a6362696c6720
R10: 0000200000c00000 R11: 0000000000000246 R12: ffffffffffffffd0
R13: 0000000000000002 R14: 00007ffe1cb5f520 R15: 00007ff266cbb000
</TASK>
============================================================
Link: https://lkml.kernel.org/r/20250523-warning_in_page_counter_cancel-v2-1-b6df1a8cfefd@igalia.com
Link: https://people.igalia.com/rcn/kernel_logs/20250422__WARNING_in_page_counter_cancel__repro.c [1]
Link: https://lore.kernel.org/all/67000a50.050a0220.49194.048d.GAE@google.com/ [2]
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Florent Revest <revest@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull iommu fix from Joerg Roedel:
- core: skip PASID validation for devices without PASID support
* tag 'iommu-fixes-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Skip PASID validation for devices without PASID capability
If, in a previous transfer, the controller sends more data than expected
by the DSPI target, SR.RFDF (RX FIFO is not empty) will remain asserted.
When flushing the FIFOs at the beginning of a new transfer (writing 1
into MCR.CLR_TXF and MCR.CLR_RXF), SR.RFDF should also be cleared.
Otherwise, when running in target mode with DMA, if SR.RFDF remains
asserted, the DMA callback will be fired before the controller sends any
data.
Take this opportunity to reset all Status Register fields.
Fixes: 5ce3cc567471 ("spi: spi-fsl-dspi: Provide support for DSPI slave mode operation (Vybryd vf610)")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-3-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds support for a revision of the Turtle Beach Recon Wired Controller,
the Turtle Beach Stealth Ultra, and the PowerA Wired Controller.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250513225950.2719387-1-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
I am seeing soft lockup on certain machine types when a cgroup OOMs. This
is happening because killing the process in certain machine might be very
slow, which causes the soft lockup and RCU stalls. This happens usually
when the cgroup has MANY processes and memory.oom.group is set.
Example I am seeing in real production:
[462012.244552] Memory cgroup out of memory: Killed process 3370438 (crosvm) ....
....
[462037.318059] Memory cgroup out of memory: Killed process 4171372 (adb) ....
[462037.348314] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [stat_manager-ag:1618982]
....
Quick look at why this is so slow, it seems to be related to serial flush
for certain machine types. For all the crashes I saw, the target CPU was
at console_flush_all().
In the case above, there are thousands of processes in the cgroup, and it
is soft locking up before it reaches the 1024 limit in the code (which
would call the cond_resched()). So, cond_resched() in 1024 blocks is not
sufficient.
Remove the counter-based conditional rescheduling logic and call
cond_resched() unconditionally after each task iteration, after fn() is
called. This avoids the lockup independently of how slow fn() is.
Link: https://lkml.kernel.org/r/20250523-memcg_fix-v1-1-ad3eafb60477@debian.org
Fixes: ade81479c7dd ("memcg: fix soft lockup in the OOM process")
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michael van der Westhuizen <rmikey@meta.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull, on target to be quiet, just one amdgpu, one
edid and a few minor xe fixes.
edid:
- fix HDR metadata reset
amdgpu:
- Hibernate fix
xe:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs"
* tag 'drm-fixes-2025-05-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/ptl: Update the PTL pci id table
drm/xe: Use xe_mmio_read32() to read mtcfg register
drm/xe/mocs: Check if all domains awake
Revert "drm/amd: Keep display off while going into S4"
drm/edid: fixed the bug that hdr metadata was not reset
Generally PASID support requires ACS settings that usually create
single device groups, but there are some niche cases where we can get
multi-device groups and still have working PASID support. The primary
issue is that PCI switches are not required to treat PASID tagged TLPs
specially so appropriate ACS settings are required to route all TLPs to
the host bridge if PASID is going to work properly.
pci_enable_pasid() does check that each device that will use PASID has
the proper ACS settings to achieve this routing.
However, no-PASID devices can be combined with PASID capable devices
within the same topology using non-uniform ACS settings. In this case
the no-PASID devices may not have strict route to host ACS flags and
end up being grouped with the PASID devices.
This configuration fails to allow use of the PASID within the iommu
core code which wrongly checks if the no-PASID device supports PASID.
Fix this by ignoring no-PASID devices during the PASID validation. They
will never issue a PASID TLP anyhow so they can be ignored.
Fixes: c404f55c26fc ("iommu: Validate the PASID in iommu_attach_device_pasid()")
Cc: stable@vger.kernel.org
Signed-off-by: Tushar Dave <tdave@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250520011937.3230557-1-tdave@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The XSPI mode implementation in this driver still uses the EOQ flag to
signal the last word in a transmission and deassert the PCS signal.
However, at speeds lower than ~200kHZ, the PCS signal seems to remain
asserted even when SR[EOQF] = 1 indicates the end of a transmission.
This is a problem for target devices which require the deassertation of
the PCS signal between transfers.
Hence, this commit 'forces' the deassertation of the PCS by stopping the
module through MCR[HALT] after completing a new transfer. According to
the reference manual, the module stops or transitions from the Running
state to the Stopped state after the current frame, when any one of the
following conditions exist:
- The value of SR[EOQF] = 1.
- The chip is in Debug mode and the value of MCR[FRZ] = 1.
- The value of MCR[HALT] = 1.
This shouldn't be done if the last transfer in the message has cs_change
set.
Fixes: ea93ed4c181b ("spi: spi-fsl-dspi: Use EOQ for last word in buffer even for XSPI mode")
Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-2-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent commit put one entry in the wrong place. This just moves it to the
right place.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A kernel crash was observed when replacing free hugetlb folios:
BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary)
RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0
RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000
RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000
RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000
R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000
R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004
FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0
Call Trace:
<TASK>
replace_free_hugepage_folios+0xb6/0x100
alloc_contig_range_noprof+0x18a/0x590
? srso_return_thunk+0x5/0x5f
? down_read+0x12/0xa0
? srso_return_thunk+0x5/0x5f
cma_range_alloc.constprop.0+0x131/0x290
__cma_alloc+0xcf/0x2c0
cma_alloc_write+0x43/0xb0
simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110
debugfs_attr_write+0x46/0x70
full_proxy_write+0x62/0xa0
vfs_write+0xf8/0x420
? srso_return_thunk+0x5/0x5f
? filp_flush+0x86/0xa0
? srso_return_thunk+0x5/0x5f
? filp_close+0x1f/0x30
? srso_return_thunk+0x5/0x5f
? do_dup2+0xaf/0x160
? srso_return_thunk+0x5/0x5f
ksys_write+0x65/0xe0
do_syscall_64+0x64/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
There is a potential race between __update_and_free_hugetlb_folio() and
replace_free_hugepage_folios():
CPU1 CPU2
__update_and_free_hugetlb_folio replace_free_hugepage_folios
folio_test_hugetlb(folio)
-- It's still hugetlb folio.
__folio_clear_hugetlb(folio)
hugetlb_free_folio(folio)
h = folio_hstate(folio)
-- Here, h is NULL pointer
When the above race condition occurs, folio_hstate(folio) returns NULL,
and subsequent access to this NULL pointer will cause the system to crash.
To resolve this issue, execute folio_hstate(folio) under the protection
of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not
return NULL.
Link: https://lkml.kernel.org/r/1747884137-26685-1-git-send-email-yangge1116@126.com
Fixes: 04f13d241b8b ("mm: replace free hugepage folios after migration")
Signed-off-by: Ge Yang <yangge1116@126.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull thermal control fix from Rafael Wysocki:
"This fixes a coding mistake in the x86_pkg_temp_thermal Intel thermal
driver that was introduced by an incorrect conflict resolution during
a merge (Zhang Rui)"
* tag 'thermal-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: x86_pkg_temp_thermal: Fix bogus trip temperature
Driver Changes:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/uixp5cq7emz32lmwwvq4vbujppugfozhyj3cm2aqzx4lcg7ivn@m2khvf4kvz5p
DSPI registers are NOT continuous, some registers are reserved and
accessing them from userspace will trigger external abort, add regmap
register access table to avoid below abort.
For example on S32G:
# cat /sys/kernel/debug/regmap/401d8000.spi/registers
Internal error: synchronous external abort: 96000210 1 PREEMPT SMP
...
Call trace:
regmap_mmio_read32le+0x24/0x48
regmap_mmio_read+0x48/0x70
_regmap_bus_reg_read+0x38/0x48
_regmap_read+0x68/0x1b0
regmap_read+0x50/0x78
regmap_read_debugfs+0x120/0x338
Fixes: 1acbdeb92c87 ("spi/fsl-dspi: Convert to use regmap and add big-endian support")
Co-developed-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-1-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The common case is to grow reallocations, and since init_on_alloc will
have already zeroed the whole allocation, we only need to zero when
shrinking the allocation.
Link: https://lkml.kernel.org/r/20250515214217.619685-2-kees@kernel.org
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Kees Cook <kees@kernel.org>
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: "Erhard F." <erhard_f@mailbox.org>
Cc: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull smb server fixes from Steve French:
- Fix for rename regression due to the recent VFS lookup changes
- Fix write failure
- locking fix for oplock handling
* tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
ksmbd: fix rename failure
ksmbd: fix stream write failure
The tj_max value obtained from the Intel TCC library are in Celsius,
whereas the thermal subsystem operates in milli-Celsius.
This discrepancy leads to incorrect trip temperature calculations.
Fix bogus trip temperature by converting tj_max to milli-Celsius Unit.
Fixes: 8ef0ca4a177d ("Merge back other thermal control material for 6.3.")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: zhang ning <zhangn1985@outlook.com>
Closes: https://lore.kernel.org/all/TY2PR01MB3786EF0FE24353026293F5ACCD97A@TY2PR01MB3786.jpnprd01.prod.outlook.com/
Tested-by: zhang ning <zhangn1985@outlook.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Link: https://patch.msgid.link/20250519070901.1031233-1-rui.zhang@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd-drm-fixes-6.15-2025-05-22:
amdgpu:
- Hibernate fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250522183941.9606-1-alexander.deucher@amd.com
Update to current bspec table.
Bspec: 72574
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://lore.kernel.org/r/20250520195749.371748-1-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 49c6dc74b5968885f421f9f1b45eb4890b955870)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
Some places in the spi core pass in a const pointer to a device and the
default container_of() casts that away, which is not a good idea.
Preserve the proper const attribute by using container_of_const() for
to_spi_device() instead, which is what it was designed for.
Note, this removes the NULL check for a device pointer in the call, but
no one was ever checking for that return value, and a device pointer
should never be NULL overall anyway, so this should be a safe change.
Cc: Mark Brown <broonie@kernel.org>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052230-fidgeting-stooge-66f5@gregkh
Signed-off-by: Mark Brown <broonie@kernel.org>
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Patch series "mm: vmalloc: Actually use the in-place vrealloc region".
This fixes a performance regression[1] with vrealloc()[1].
The refactoring to not build a new vmalloc region only actually worked
when shrinking. Actually return the resized area when it grows. Ugh.
Link: https://lkml.kernel.org/r/20250515214217.619685-1-kees@kernel.org
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Kees Cook <kees@kernel.org>
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Closes: https://lore.kernel.org/all/20250515-bpf-verifier-slowdown-vwo2meju4cgp2su5ckj@6gi6ssxbnfqg [1]
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: "Erhard F." <erhard_f@mailbox.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off"
* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
The list_first_entry() macro never returns NULL. If the list is
empty then it returns an invalid pointer. Use list_first_entry_or_null()
to check if the list is empty.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505080231.7OXwq4Te-lkp@intel.com/
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Short summary of fixes pull:
edid:
- fix HDR metadata reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522113902.GA7000@localhost.localdomain
commit 68bfdc8dc0a1a ("drm/amd: Keep display off while going into S4")
attempted to keep displays off during the S4 sequence by not resuming
display IP. This however leads to hangs because DRM clients such as the
console can try to access registers and cause a hang.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4155
Fixes: 68bfdc8dc0a1a ("drm/amd: Keep display off while going into S4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250522141328.115095-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e485502c37b097b0bd773baa7e2741bf7bd2909a)
Cc: stable@vger.kernel.org
The mtcfg register is a 32-bit register and should therefore be
accessed using xe_mmio_read32().
Other 3 changes per codestyle suggestion:
"
xe_mmio.c:83: CHECK: Alignment should match open parenthesis
xe_mmio.c:131: CHECK: Comparison to NULL could be written "!xe->mmio.regs"
xe_mmio.c:315: CHECK: line length of 103 exceeds 100 columns
"
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250513153010.3464767-1-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d2662cf8f44a68deb6c76ad9f1d9f29dbf7ba601)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix delayed timers
- Fix NULL pointer deref
- Fix wrong range check
* tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix MAX_REG_OFFSET
MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus()
MIPS: rename rollback_handler with skipover_handler
MIPS: Move r4k_wait() to .cpuidle.text section
MIPS: Fix idle VS timer enqueue
KVM x86 fixes for 6.15-rcN
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
- When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes: 540602a43ae5 ("Input: xpad - add a few new VID/PID combinations")
Fixes: 3492321e2e60 ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a module gets unloaded it checks whether any of its tags are still in
use and if so, we keep the memory containing module's allocation tags
alive until all tags are unused. However percpu counters referenced by
the tags are freed by free_module(). This will lead to UAF if the memory
allocated by a module is accessed after module was unloaded.
To fix this we allocate percpu counters for module allocation tags
dynamically and we keep it alive for tags which are still in use after
module unloading. This also removes the requirement of a larger
PERCPU_MODULE_RESERVE when memory allocation profiling is enabled because
percpu memory for counters does not need to be reserved anymore.
Link: https://lkml.kernel.org/r/20250517000739.5930-1-surenb@google.com
Fixes: 0db6f8d7820a ("alloc_tag: load module tags into separate contiguous memory")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Tested-by: David Wang <00107082@163.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull x86 platform drivers fixes from Ilpo Järvinen:
- dell-wmi-sysman: Avoid buffer overflow in current_password_store()
- fujitsu-laptop: Support Lifebook S2110 hotkeys
- intel/pmc: Fix Arrow Lake U/H NPU PCI ID
- think-lmi: Fix attribute name usage for non-compliant items
- thinkpad_acpi: Ignore battery threshold change event notification
* tag 'platform-drivers-x86-v6.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/pmc: Fix Arrow Lake U/H NPU PCI ID
platform/x86: think-lmi: Fix attribute name usage for non-compliant items
platform/x86: thinkpad_acpi: Ignore battery threshold change event notification
platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store()
platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys
mvebu fixes for 6.15 (part 1)
Fix uDPU board LEDs by correcting pinctrl state
* tag 'mvebu-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Link: https://lore.kernel.org/r/87wmagpr0a.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I found that rename fails after cifs mount due to update of
lookup_one_qstr_excl().
mv a/c b/
mv: cannot move 'a/c' to 'b/c': No such file or directory
In order to rename to a new name regardless of whether the dentry is
negative, we need to get the dentry through lookup_one_qstr_excl().
So It will not return error if the name doesn't exist.
Fixes: 204a575e91f3 ("VFS: add common error checks to lookup_one_qstr_excl()")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull dmaengine fixes from Vinod Koul:
"This has a bunch of idxd driver fixes, dmatest revert and bunch of
smaller driver fixes:
- a bunch of idxd potential mem leak fixes
- dmatest revert for waiting for interrupt fix as that causes issue
- a couple of ti k3 udma fixes for locking and cap_mask
- mediatek deadlock fix and unused variable cleanup fix"
* tag 'dmaengine-fix-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mediatek: drop unused variable
dmaengine: fsl-edma: Fix return code for unhandled interrupts
dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()
dmaengine: idxd: Fix ->poll() return value
dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call
dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe
dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
dmaengine: idxd: Add missing cleanups in cleanup internals
dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs
dmaengine: ptdma: Move variable condition check to the first place and remove redundancy
dmaengine: idxd: Fix allowing write() from different address spaces
dmaengine: ti: k3-udma: Add missing locking
dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy
dmaengine: Revert "dmaengine: dmatest: Fix dmatest waiting less when interrupted"
dmaengine: idxd: cdev: Fix uninitialized use of sva in idxd_cdev_open
When DP connected to a device with HDR capability,
the hdr structure was filled.Then connected to another
sink device without hdr capability, but the hdr info
still exist.
Fixes: e85959d6cbe0 ("drm: Parse HDR metadata info from EDID")
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: "feijuan.li" <feijuan.li@samsung.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250514063511.4151780-1-feijuan.li@samsung.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Check if all domains are awake specially for
LNCF regs
Fixes: 298661cd9cea ("drm/xe: Fix MOCS debugfs LNCF readout")
Improvements-suggested-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250506142300.1865783-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit a383cf218ef8bb35d4c03958bd956573b65cf778)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
Fix MAX_REG_OFFSET to point to the last register in 'pt_regs' and not to
the marker itself, which could allow regs_get_register() to return an
invalid offset.
Fixes: 40e084a506eb ("MIPS: Add uprobes support.")
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
Set the magic BP_SPEC_REDUCE bit to mitigate SRSO when running VMs if and
only if KVM has at least one active VM. Leaving the bit set at all times
unfortunately degrades performance by a wee bit more than expected.
Use a dedicated spinlock and counter instead of hooking virtualization
enablement, as changing the behavior of kvm.enable_virt_at_load based on
SRSO_BP_SPEC_REDUCE is painful, and has its own drawbacks, e.g. could
result in performance issues for flows that are sensitive to VM creation
latency.
Defer setting BP_SPEC_REDUCE until VMRUN is imminent to avoid impacting
performance on CPUs that aren't running VMs, e.g. if a setup is using
housekeeping CPUs. Setting BP_SPEC_REDUCE in task context, i.e. without
blasting IPIs to all CPUs, also helps avoid serializing 1<=>N transitions
without incurring a gross amount of complexity (see the Link for details
on how ugly coordinating via IPIs gets).
Link: https://lore.kernel.org/all/aBOnzNCngyS_pQIW@google.com
Fixes: 8442df2b49ed ("x86/bugs: KVM: Add support for SRSO_MSR_FIX")
Reported-by: Michael Larabel <Michael@michaellarabel.com>
Closes: https://www.phoronix.com/review/linux-615-amd-regression
Cc: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250505180300.973137-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To wake up the system from s2idle when pressing the power-button, let's
convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows
us to specify the "hard" in-parameter, which needs to be set for s2idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When module load fails after memory for codetag section is ready, codetag
section memory will not be properly released. This causes memory leak,
and if next module load happens to get the same module address, codetag
may pick the uninitialized section when manipulating tags during module
unload, and leads to "unable to handle page fault" BUG.
Link: https://lkml.kernel.org/r/20250519163823.7540-1-00107082@163.com
Fixes: 0db6f8d7820a ("alloc_tag: load module tags into separate contiguous memory")
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Signed-off-by: David Wang <00107082@163.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull vfs fixes from Christian Brauner:
"This contains a small set of fixes for the blocking buffer lookup
conversion done earlier this cycle.
It adds a missing conversion in the getblk slowpath and a few minor
optimizations and cleanups"
* tag 'vfs-6.15-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
The ARL requires that the GMA and NPU devices both be in D3Hot in order
for PC10 and S0iX to be achieved in S2idle. The original ARL-H/U addition
to the intel_pmc_core driver attempted to do this by switching them to D3
in the init and resume calls of the intel_pmc_core driver.
The problem is the ARL-H/U have a different NPU device and thus are not
being properly set and thus S0iX does not work properly in ARL-H/U. This
patch creates a new ARL-H specific device id that is correct and also
adds the D3 fixup to the suspend callback. This way if the PCI devies
drop from D3 to D0 after resume they can be corrected for the next
suspend. Thus there is no dropout in S0iX.
Fixes: bd820906ea9d ("platform/x86/intel/pmc: Add Arrow Lake U/H support to intel_pmc_core driver")
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Link: https://lore.kernel.org/r/a61f78be45c13f39e122dcc684b636f4b21e79a0.1747737446.git.todd.e.brandt@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Allwinner fixes for 6.15
Only one fix:
Switch back to I2C for PMICs on Allwinner H6 devices. Apparently using
Allwinner's proprietary bus ended up causing issues when the PMIC was
sharing the bus with other devices.
* tag 'sunxi-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
Link: https://lore.kernel.org/r/aCaeLgjZllV7bauX@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The two alarm LEDs of on the uDPU board are stopped working since
commit 78efa53e715e ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge
GPIO controller. These pins are part of the 'spi_quad' pin group
for which the 'spi' function is selected via the default pinctrl
state of the 'spi' node. This is wrong however, since in order to
allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected
first by the pinctrl core before probing the spi driver, but then
it gets overridden to 'gpio' implicitly via the
devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the
SPI subsystem, so the function of the pin group remains 'spi'
which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is
that the pinctrl state definition is wrong since its initial commit
0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins'
node to 'gpio' and move the pinctrl state definition from the
'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1
Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
If there is no stream data in file, v_len is zero.
So, If position(*pos) is zero, stream write will fail
due to stream write position validation check.
This patch reorganize stream write position validation.
Fixes: 0ca6df4f40cf ("ksmbd: prevent out-of-bounds stream writes by validating *pos")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull phy fixes from Vinod Koul:
"A bunch of renesas fixes and few smaller fixes in other drivers:
- Rensas fixes for unbind ole detection, irq, locking etc
- tegra fixes for error handling at init and UTMI power states and
stray unlock fix
- rockchip missing assignment and pll output fixes
- startfive usb host detection fixes"
* tag 'phy-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: Fix error handling in tegra_xusb_port_init
phy: renesas: rcar-gen3-usb2: Set timing registers only once
phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off
phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data
phy: renesas: rcar-gen3-usb2: Move IRQ request in probe
phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
phy: tegra: xusb: remove a stray unlock
phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error
phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure
phy: rockchip-samsung-dcphy: Add missing assignment
phy: can-transceiver: Re-instate "mux-states" property presence check
phy: qcom-qmp-ufs: check for mode type for phy setting
phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
Commit 157ae5ffd76a dmaengine: mediatek: Fix a possible deadlock error
in mtk_cqdma_tx_status() fixed locks but kept unused varibale leading to
warning and build failure (due to warning treated as errors)
drivers/dma/mediatek/mtk-cqdma.c: In function 'mtk_cqdma_find_active_desc':
drivers/dma/mediatek/mtk-cqdma.c:423:23: error: unused variable 'flags' [-Werror=unused-variable]
423 | unsigned long flags;
| ^~~~~
Fix by dropping this unused flag
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 157ae5ffd76a ("dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is kind of last-minute, but Al Viro reported that the new
FOP_DONTCACHE flag causes memory corruption due to use-after-free
issues.
This was triggered by commit 974c5e6139db ("xfs: flag as supporting
FOP_DONTCACHE"), but that is not the underlying bug - it is just the
first user of the flag.
Vlastimil Babka suspects the underlying problem stems from the
folio_end_writeback() logic introduced in commit fb7d3bc414939
("mm/filemap: drop streaming/uncached pages when writeback completes").
The most straightforward fix would be to just revert the commit that
exposed this, but Matthew Wilcox points out that other filesystems are
also starting to enable the FOP_DONTCACHE logic, so this instead
disables that bit globally for now.
The fix will hopefully end up being trivial and we can just re-enable
this logic after more testing, but until such a time we'll have to
disable the new FOP_DONTCACHE flag.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20250525083209.GS2023217@ZenIV/
Triggered-by: 974c5e6139db ("xfs: flag as supporting FOP_DONTCACHE")
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull hotfixes from Andrew Morton:
"22 hotfixes.
13 are cc:stable and the remainder address post-6.14 issues or aren't
considered necessary for -stable kernels. 19 are for MM"
* tag 'mm-hotfixes-stable-2025-05-25-00-58' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mailmap: add Jarkko's employer email address
mm: fix copy_vma() error handling for hugetlb mappings
memcg: always call cond_resched() after fn()
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
mm: vmalloc: only zero-init on vrealloc shrink
mm: vmalloc: actually use the in-place vrealloc region
alloc_tag: allocate percpu counters for module tags dynamically
module: release codetag section when module load fails
mm/cma: make detection of highmem_start more robust
MAINTAINERS: add mm memory policy section
MAINTAINERS: add mm ksm section
kasan: avoid sleepable page allocation from atomic context
highmem: add folio_test_partial_kmap()
MAINTAINERS: add hung-task detector section
taskstats: fix struct taskstats breaks backward compatibility since version 15
mm/truncate: fix out-of-bounds when doing a right-aligned split
MAINTAINERS: add mm reclaim section
MAINTAINERS: update page allocator section
mm: fix VM_UFFD_MINOR == VM_SHADOW_STACK on USERFAULTFD=y && ARM64_GCS=y
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE only if THP is enabled
...
Pull input fixes from Dmitry Torokhov:
- even more Xbox controllers added to xpad driver: Turtle Beach Recon
Wired Controller, Turtle Beach Stealth Ultra, and PowerA Wired
Controller
- a fix to Synaptics RMI driver to not crash if controller reports
unsupported version of F34 (firmware flash) function
* tag 'input-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi - fix crash with unsupported versions of F34
Input: xpad - add more controllers
Add the current employer email address to mailmap.
Link: https://lkml.kernel.org/r/20250523121105.15850-1-jarkko@kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Antonio Quartulli <antonio@openvpn.net>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull spi fixes from Mark Brown:
"A few final fixes for v6.15, some driver fixes for the Freescale DSPI
driver pulled over from their vendor code and another instance of the
fixes Greg has been sending throughout the kernel for constification
of the bus_type in driver core match() functions"
* tag 'spi-fix-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: Reset SR flags before sending a new message
spi: spi-fsl-dspi: Halt the module after a new message transfer
spi: spi-fsl-dspi: restrict register range for regmap access
spi: use container_of_cont() for to_spi_device()
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de>
Fixes: 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If, during a mremap() operation for a hugetlb-backed memory mapping,
copy_vma() fails after the source vma has been duplicated and opened (ie.
vma_link() fails), the error is handled by closing the new vma. This
updates the hugetlbfs reservation counter of the reservation map which at
this point is referenced by both the source vma and the new copy. As a
result, once the new vma has been freed and copy_vma() returns, the
reservation counter for the source vma will be incorrect.
This patch addresses this corner case by clearing the hugetlb private page
reservation reference for the new vma and decrementing the reference
before closing the vma, so that vma_close() won't update the reservation
counter. This is also what copy_vma_and_data() does with the source vma
if copy_vma() succeeds, so a helper function has been added to do the
fixup in both functions.
The issue was reported by a private syzbot instance and can be reproduced
using the C reproducer in [1]. It's also a possible duplicate of public
syzbot report [2]. The WARNING report is:
============================================================
page_counter underflow: -1024 nr_pages=1024
WARNING: CPU: 0 PID: 3287 at mm/page_counter.c:61 page_counter_cancel+0xf6/0x120
Modules linked in:
CPU: 0 UID: 0 PID: 3287 Comm: repro__WARNING_ Not tainted 6.15.0-rc7+ #54 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:page_counter_cancel+0xf6/0x120
Code: ff 5b 41 5e 41 5f 5d c3 cc cc cc cc e8 f3 4f 8f ff c6 05 64 01 27 06 01 48 c7 c7 60 15 f8 85 48 89 de 4c 89 fa e8 2a a7 51 ff <0f> 0b e9 66 ff ff ff 44 89 f9 80 e1 07 38 c1 7c 9d 4c 81
RSP: 0018:ffffc900025df6a0 EFLAGS: 00010246
RAX: 2edfc409ebb44e00 RBX: fffffffffffffc00 RCX: ffff8880155f0000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff81c4a23c R09: 1ffff1100330482a
R10: dffffc0000000000 R11: ffffed100330482b R12: 0000000000000000
R13: ffff888058a882c0 R14: ffff888058a882c0 R15: 0000000000000400
FS: 0000000000000000(0000) GS:ffff88808fc53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b33e0 CR3: 00000000076d6000 CR4: 00000000000006f0
Call Trace:
<TASK>
page_counter_uncharge+0x33/0x80
hugetlb_cgroup_uncharge_counter+0xcb/0x120
hugetlb_vm_op_close+0x579/0x960
? __pfx_hugetlb_vm_op_close+0x10/0x10
remove_vma+0x88/0x130
exit_mmap+0x71e/0xe00
? __pfx_exit_mmap+0x10/0x10
? __mutex_unlock_slowpath+0x22e/0x7f0
? __pfx_exit_aio+0x10/0x10
? __up_read+0x256/0x690
? uprobe_clear_state+0x274/0x290
? mm_update_next_owner+0xa9/0x810
__mmput+0xc9/0x370
exit_mm+0x203/0x2f0
? __pfx_exit_mm+0x10/0x10
? taskstats_exit+0x32b/0xa60
do_exit+0x921/0x2740
? do_raw_spin_lock+0x155/0x3b0
? __pfx_do_exit+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0xc5/0x100
do_group_exit+0x20c/0x2c0
get_signal+0x168c/0x1720
? __pfx_get_signal+0x10/0x10
? schedule+0x165/0x360
arch_do_signal_or_restart+0x8e/0x7d0
? __pfx_arch_do_signal_or_restart+0x10/0x10
? __pfx___se_sys_futex+0x10/0x10
syscall_exit_to_user_mode+0xb8/0x2c0
do_syscall_64+0x75/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x422dcd
Code: Unable to access opcode bytes at 0x422da3.
RSP: 002b:00007ff266cdb208 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00007ff266cdbcdc RCX: 0000000000422dcd
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004c7bec
RBP: 00007ff266cdb220 R08: 203a6362696c6720 R09: 203a6362696c6720
R10: 0000200000c00000 R11: 0000000000000246 R12: ffffffffffffffd0
R13: 0000000000000002 R14: 00007ffe1cb5f520 R15: 00007ff266cbb000
</TASK>
============================================================
Link: https://lkml.kernel.org/r/20250523-warning_in_page_counter_cancel-v2-1-b6df1a8cfefd@igalia.com
Link: https://people.igalia.com/rcn/kernel_logs/20250422__WARNING_in_page_counter_cancel__repro.c [1]
Link: https://lore.kernel.org/all/67000a50.050a0220.49194.048d.GAE@google.com/ [2]
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Florent Revest <revest@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If, in a previous transfer, the controller sends more data than expected
by the DSPI target, SR.RFDF (RX FIFO is not empty) will remain asserted.
When flushing the FIFOs at the beginning of a new transfer (writing 1
into MCR.CLR_TXF and MCR.CLR_RXF), SR.RFDF should also be cleared.
Otherwise, when running in target mode with DMA, if SR.RFDF remains
asserted, the DMA callback will be fired before the controller sends any
data.
Take this opportunity to reset all Status Register fields.
Fixes: 5ce3cc567471 ("spi: spi-fsl-dspi: Provide support for DSPI slave mode operation (Vybryd vf610)")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-3-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds support for a revision of the Turtle Beach Recon Wired Controller,
the Turtle Beach Stealth Ultra, and the PowerA Wired Controller.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250513225950.2719387-1-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
I am seeing soft lockup on certain machine types when a cgroup OOMs. This
is happening because killing the process in certain machine might be very
slow, which causes the soft lockup and RCU stalls. This happens usually
when the cgroup has MANY processes and memory.oom.group is set.
Example I am seeing in real production:
[462012.244552] Memory cgroup out of memory: Killed process 3370438 (crosvm) ....
....
[462037.318059] Memory cgroup out of memory: Killed process 4171372 (adb) ....
[462037.348314] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [stat_manager-ag:1618982]
....
Quick look at why this is so slow, it seems to be related to serial flush
for certain machine types. For all the crashes I saw, the target CPU was
at console_flush_all().
In the case above, there are thousands of processes in the cgroup, and it
is soft locking up before it reaches the 1024 limit in the code (which
would call the cond_resched()). So, cond_resched() in 1024 blocks is not
sufficient.
Remove the counter-based conditional rescheduling logic and call
cond_resched() unconditionally after each task iteration, after fn() is
called. This avoids the lockup independently of how slow fn() is.
Link: https://lkml.kernel.org/r/20250523-memcg_fix-v1-1-ad3eafb60477@debian.org
Fixes: ade81479c7dd ("memcg: fix soft lockup in the OOM process")
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michael van der Westhuizen <rmikey@meta.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull, on target to be quiet, just one amdgpu, one
edid and a few minor xe fixes.
edid:
- fix HDR metadata reset
amdgpu:
- Hibernate fix
xe:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs"
* tag 'drm-fixes-2025-05-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/ptl: Update the PTL pci id table
drm/xe: Use xe_mmio_read32() to read mtcfg register
drm/xe/mocs: Check if all domains awake
Revert "drm/amd: Keep display off while going into S4"
drm/edid: fixed the bug that hdr metadata was not reset
Generally PASID support requires ACS settings that usually create
single device groups, but there are some niche cases where we can get
multi-device groups and still have working PASID support. The primary
issue is that PCI switches are not required to treat PASID tagged TLPs
specially so appropriate ACS settings are required to route all TLPs to
the host bridge if PASID is going to work properly.
pci_enable_pasid() does check that each device that will use PASID has
the proper ACS settings to achieve this routing.
However, no-PASID devices can be combined with PASID capable devices
within the same topology using non-uniform ACS settings. In this case
the no-PASID devices may not have strict route to host ACS flags and
end up being grouped with the PASID devices.
This configuration fails to allow use of the PASID within the iommu
core code which wrongly checks if the no-PASID device supports PASID.
Fix this by ignoring no-PASID devices during the PASID validation. They
will never issue a PASID TLP anyhow so they can be ignored.
Fixes: c404f55c26fc ("iommu: Validate the PASID in iommu_attach_device_pasid()")
Cc: stable@vger.kernel.org
Signed-off-by: Tushar Dave <tdave@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250520011937.3230557-1-tdave@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The XSPI mode implementation in this driver still uses the EOQ flag to
signal the last word in a transmission and deassert the PCS signal.
However, at speeds lower than ~200kHZ, the PCS signal seems to remain
asserted even when SR[EOQF] = 1 indicates the end of a transmission.
This is a problem for target devices which require the deassertation of
the PCS signal between transfers.
Hence, this commit 'forces' the deassertation of the PCS by stopping the
module through MCR[HALT] after completing a new transfer. According to
the reference manual, the module stops or transitions from the Running
state to the Stopped state after the current frame, when any one of the
following conditions exist:
- The value of SR[EOQF] = 1.
- The chip is in Debug mode and the value of MCR[FRZ] = 1.
- The value of MCR[HALT] = 1.
This shouldn't be done if the last transfer in the message has cs_change
set.
Fixes: ea93ed4c181b ("spi: spi-fsl-dspi: Use EOQ for last word in buffer even for XSPI mode")
Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-2-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A kernel crash was observed when replacing free hugetlb folios:
BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary)
RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0
RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000
RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000
RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000
R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000
R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004
FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0
Call Trace:
<TASK>
replace_free_hugepage_folios+0xb6/0x100
alloc_contig_range_noprof+0x18a/0x590
? srso_return_thunk+0x5/0x5f
? down_read+0x12/0xa0
? srso_return_thunk+0x5/0x5f
cma_range_alloc.constprop.0+0x131/0x290
__cma_alloc+0xcf/0x2c0
cma_alloc_write+0x43/0xb0
simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110
debugfs_attr_write+0x46/0x70
full_proxy_write+0x62/0xa0
vfs_write+0xf8/0x420
? srso_return_thunk+0x5/0x5f
? filp_flush+0x86/0xa0
? srso_return_thunk+0x5/0x5f
? filp_close+0x1f/0x30
? srso_return_thunk+0x5/0x5f
? do_dup2+0xaf/0x160
? srso_return_thunk+0x5/0x5f
ksys_write+0x65/0xe0
do_syscall_64+0x64/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
There is a potential race between __update_and_free_hugetlb_folio() and
replace_free_hugepage_folios():
CPU1 CPU2
__update_and_free_hugetlb_folio replace_free_hugepage_folios
folio_test_hugetlb(folio)
-- It's still hugetlb folio.
__folio_clear_hugetlb(folio)
hugetlb_free_folio(folio)
h = folio_hstate(folio)
-- Here, h is NULL pointer
When the above race condition occurs, folio_hstate(folio) returns NULL,
and subsequent access to this NULL pointer will cause the system to crash.
To resolve this issue, execute folio_hstate(folio) under the protection
of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not
return NULL.
Link: https://lkml.kernel.org/r/1747884137-26685-1-git-send-email-yangge1116@126.com
Fixes: 04f13d241b8b ("mm: replace free hugepage folios after migration")
Signed-off-by: Ge Yang <yangge1116@126.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull thermal control fix from Rafael Wysocki:
"This fixes a coding mistake in the x86_pkg_temp_thermal Intel thermal
driver that was introduced by an incorrect conflict resolution during
a merge (Zhang Rui)"
* tag 'thermal-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: x86_pkg_temp_thermal: Fix bogus trip temperature
Driver Changes:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/uixp5cq7emz32lmwwvq4vbujppugfozhyj3cm2aqzx4lcg7ivn@m2khvf4kvz5p
DSPI registers are NOT continuous, some registers are reserved and
accessing them from userspace will trigger external abort, add regmap
register access table to avoid below abort.
For example on S32G:
# cat /sys/kernel/debug/regmap/401d8000.spi/registers
Internal error: synchronous external abort: 96000210 1 PREEMPT SMP
...
Call trace:
regmap_mmio_read32le+0x24/0x48
regmap_mmio_read+0x48/0x70
_regmap_bus_reg_read+0x38/0x48
_regmap_read+0x68/0x1b0
regmap_read+0x50/0x78
regmap_read_debugfs+0x120/0x338
Fixes: 1acbdeb92c87 ("spi/fsl-dspi: Convert to use regmap and add big-endian support")
Co-developed-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-1-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The common case is to grow reallocations, and since init_on_alloc will
have already zeroed the whole allocation, we only need to zero when
shrinking the allocation.
Link: https://lkml.kernel.org/r/20250515214217.619685-2-kees@kernel.org
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Kees Cook <kees@kernel.org>
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: "Erhard F." <erhard_f@mailbox.org>
Cc: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull smb server fixes from Steve French:
- Fix for rename regression due to the recent VFS lookup changes
- Fix write failure
- locking fix for oplock handling
* tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
ksmbd: fix rename failure
ksmbd: fix stream write failure
The tj_max value obtained from the Intel TCC library are in Celsius,
whereas the thermal subsystem operates in milli-Celsius.
This discrepancy leads to incorrect trip temperature calculations.
Fix bogus trip temperature by converting tj_max to milli-Celsius Unit.
Fixes: 8ef0ca4a177d ("Merge back other thermal control material for 6.3.")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: zhang ning <zhangn1985@outlook.com>
Closes: https://lore.kernel.org/all/TY2PR01MB3786EF0FE24353026293F5ACCD97A@TY2PR01MB3786.jpnprd01.prod.outlook.com/
Tested-by: zhang ning <zhangn1985@outlook.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Link: https://patch.msgid.link/20250519070901.1031233-1-rui.zhang@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update to current bspec table.
Bspec: 72574
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://lore.kernel.org/r/20250520195749.371748-1-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 49c6dc74b5968885f421f9f1b45eb4890b955870)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
Some places in the spi core pass in a const pointer to a device and the
default container_of() casts that away, which is not a good idea.
Preserve the proper const attribute by using container_of_const() for
to_spi_device() instead, which is what it was designed for.
Note, this removes the NULL check for a device pointer in the call, but
no one was ever checking for that return value, and a device pointer
should never be NULL overall anyway, so this should be a safe change.
Cc: Mark Brown <broonie@kernel.org>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052230-fidgeting-stooge-66f5@gregkh
Signed-off-by: Mark Brown <broonie@kernel.org>
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Patch series "mm: vmalloc: Actually use the in-place vrealloc region".
This fixes a performance regression[1] with vrealloc()[1].
The refactoring to not build a new vmalloc region only actually worked
when shrinking. Actually return the resized area when it grows. Ugh.
Link: https://lkml.kernel.org/r/20250515214217.619685-1-kees@kernel.org
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Kees Cook <kees@kernel.org>
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Closes: https://lore.kernel.org/all/20250515-bpf-verifier-slowdown-vwo2meju4cgp2su5ckj@6gi6ssxbnfqg [1]
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: "Erhard F." <erhard_f@mailbox.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off"
* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
The list_first_entry() macro never returns NULL. If the list is
empty then it returns an invalid pointer. Use list_first_entry_or_null()
to check if the list is empty.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505080231.7OXwq4Te-lkp@intel.com/
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
commit 68bfdc8dc0a1a ("drm/amd: Keep display off while going into S4")
attempted to keep displays off during the S4 sequence by not resuming
display IP. This however leads to hangs because DRM clients such as the
console can try to access registers and cause a hang.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4155
Fixes: 68bfdc8dc0a1a ("drm/amd: Keep display off while going into S4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250522141328.115095-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e485502c37b097b0bd773baa7e2741bf7bd2909a)
Cc: stable@vger.kernel.org
The mtcfg register is a 32-bit register and should therefore be
accessed using xe_mmio_read32().
Other 3 changes per codestyle suggestion:
"
xe_mmio.c:83: CHECK: Alignment should match open parenthesis
xe_mmio.c:131: CHECK: Comparison to NULL could be written "!xe->mmio.regs"
xe_mmio.c:315: CHECK: line length of 103 exceeds 100 columns
"
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250513153010.3464767-1-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d2662cf8f44a68deb6c76ad9f1d9f29dbf7ba601)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix delayed timers
- Fix NULL pointer deref
- Fix wrong range check
* tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix MAX_REG_OFFSET
MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus()
MIPS: rename rollback_handler with skipover_handler
MIPS: Move r4k_wait() to .cpuidle.text section
MIPS: Fix idle VS timer enqueue
KVM x86 fixes for 6.15-rcN
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
- When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes: 540602a43ae5 ("Input: xpad - add a few new VID/PID combinations")
Fixes: 3492321e2e60 ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a module gets unloaded it checks whether any of its tags are still in
use and if so, we keep the memory containing module's allocation tags
alive until all tags are unused. However percpu counters referenced by
the tags are freed by free_module(). This will lead to UAF if the memory
allocated by a module is accessed after module was unloaded.
To fix this we allocate percpu counters for module allocation tags
dynamically and we keep it alive for tags which are still in use after
module unloading. This also removes the requirement of a larger
PERCPU_MODULE_RESERVE when memory allocation profiling is enabled because
percpu memory for counters does not need to be reserved anymore.
Link: https://lkml.kernel.org/r/20250517000739.5930-1-surenb@google.com
Fixes: 0db6f8d7820a ("alloc_tag: load module tags into separate contiguous memory")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Tested-by: David Wang <00107082@163.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull x86 platform drivers fixes from Ilpo Järvinen:
- dell-wmi-sysman: Avoid buffer overflow in current_password_store()
- fujitsu-laptop: Support Lifebook S2110 hotkeys
- intel/pmc: Fix Arrow Lake U/H NPU PCI ID
- think-lmi: Fix attribute name usage for non-compliant items
- thinkpad_acpi: Ignore battery threshold change event notification
* tag 'platform-drivers-x86-v6.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/pmc: Fix Arrow Lake U/H NPU PCI ID
platform/x86: think-lmi: Fix attribute name usage for non-compliant items
platform/x86: thinkpad_acpi: Ignore battery threshold change event notification
platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store()
platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys
mvebu fixes for 6.15 (part 1)
Fix uDPU board LEDs by correcting pinctrl state
* tag 'mvebu-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Link: https://lore.kernel.org/r/87wmagpr0a.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I found that rename fails after cifs mount due to update of
lookup_one_qstr_excl().
mv a/c b/
mv: cannot move 'a/c' to 'b/c': No such file or directory
In order to rename to a new name regardless of whether the dentry is
negative, we need to get the dentry through lookup_one_qstr_excl().
So It will not return error if the name doesn't exist.
Fixes: 204a575e91f3 ("VFS: add common error checks to lookup_one_qstr_excl()")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull dmaengine fixes from Vinod Koul:
"This has a bunch of idxd driver fixes, dmatest revert and bunch of
smaller driver fixes:
- a bunch of idxd potential mem leak fixes
- dmatest revert for waiting for interrupt fix as that causes issue
- a couple of ti k3 udma fixes for locking and cap_mask
- mediatek deadlock fix and unused variable cleanup fix"
* tag 'dmaengine-fix-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mediatek: drop unused variable
dmaengine: fsl-edma: Fix return code for unhandled interrupts
dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()
dmaengine: idxd: Fix ->poll() return value
dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call
dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe
dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
dmaengine: idxd: Add missing cleanups in cleanup internals
dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs
dmaengine: ptdma: Move variable condition check to the first place and remove redundancy
dmaengine: idxd: Fix allowing write() from different address spaces
dmaengine: ti: k3-udma: Add missing locking
dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy
dmaengine: Revert "dmaengine: dmatest: Fix dmatest waiting less when interrupted"
dmaengine: idxd: cdev: Fix uninitialized use of sva in idxd_cdev_open
When DP connected to a device with HDR capability,
the hdr structure was filled.Then connected to another
sink device without hdr capability, but the hdr info
still exist.
Fixes: e85959d6cbe0 ("drm: Parse HDR metadata info from EDID")
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: "feijuan.li" <feijuan.li@samsung.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250514063511.4151780-1-feijuan.li@samsung.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Check if all domains are awake specially for
LNCF regs
Fixes: 298661cd9cea ("drm/xe: Fix MOCS debugfs LNCF readout")
Improvements-suggested-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250506142300.1865783-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit a383cf218ef8bb35d4c03958bd956573b65cf778)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fix MAX_REG_OFFSET to point to the last register in 'pt_regs' and not to
the marker itself, which could allow regs_get_register() to return an
invalid offset.
Fixes: 40e084a506eb ("MIPS: Add uprobes support.")
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
Set the magic BP_SPEC_REDUCE bit to mitigate SRSO when running VMs if and
only if KVM has at least one active VM. Leaving the bit set at all times
unfortunately degrades performance by a wee bit more than expected.
Use a dedicated spinlock and counter instead of hooking virtualization
enablement, as changing the behavior of kvm.enable_virt_at_load based on
SRSO_BP_SPEC_REDUCE is painful, and has its own drawbacks, e.g. could
result in performance issues for flows that are sensitive to VM creation
latency.
Defer setting BP_SPEC_REDUCE until VMRUN is imminent to avoid impacting
performance on CPUs that aren't running VMs, e.g. if a setup is using
housekeeping CPUs. Setting BP_SPEC_REDUCE in task context, i.e. without
blasting IPIs to all CPUs, also helps avoid serializing 1<=>N transitions
without incurring a gross amount of complexity (see the Link for details
on how ugly coordinating via IPIs gets).
Link: https://lore.kernel.org/all/aBOnzNCngyS_pQIW@google.com
Fixes: 8442df2b49ed ("x86/bugs: KVM: Add support for SRSO_MSR_FIX")
Reported-by: Michael Larabel <Michael@michaellarabel.com>
Closes: https://www.phoronix.com/review/linux-615-amd-regression
Cc: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250505180300.973137-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To wake up the system from s2idle when pressing the power-button, let's
convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows
us to specify the "hard" in-parameter, which needs to be set for s2idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When module load fails after memory for codetag section is ready, codetag
section memory will not be properly released. This causes memory leak,
and if next module load happens to get the same module address, codetag
may pick the uninitialized section when manipulating tags during module
unload, and leads to "unable to handle page fault" BUG.
Link: https://lkml.kernel.org/r/20250519163823.7540-1-00107082@163.com
Fixes: 0db6f8d7820a ("alloc_tag: load module tags into separate contiguous memory")
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Signed-off-by: David Wang <00107082@163.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull vfs fixes from Christian Brauner:
"This contains a small set of fixes for the blocking buffer lookup
conversion done earlier this cycle.
It adds a missing conversion in the getblk slowpath and a few minor
optimizations and cleanups"
* tag 'vfs-6.15-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
The ARL requires that the GMA and NPU devices both be in D3Hot in order
for PC10 and S0iX to be achieved in S2idle. The original ARL-H/U addition
to the intel_pmc_core driver attempted to do this by switching them to D3
in the init and resume calls of the intel_pmc_core driver.
The problem is the ARL-H/U have a different NPU device and thus are not
being properly set and thus S0iX does not work properly in ARL-H/U. This
patch creates a new ARL-H specific device id that is correct and also
adds the D3 fixup to the suspend callback. This way if the PCI devies
drop from D3 to D0 after resume they can be corrected for the next
suspend. Thus there is no dropout in S0iX.
Fixes: bd820906ea9d ("platform/x86/intel/pmc: Add Arrow Lake U/H support to intel_pmc_core driver")
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Link: https://lore.kernel.org/r/a61f78be45c13f39e122dcc684b636f4b21e79a0.1747737446.git.todd.e.brandt@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Allwinner fixes for 6.15
Only one fix:
Switch back to I2C for PMICs on Allwinner H6 devices. Apparently using
Allwinner's proprietary bus ended up causing issues when the PMIC was
sharing the bus with other devices.
* tag 'sunxi-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
Link: https://lore.kernel.org/r/aCaeLgjZllV7bauX@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The two alarm LEDs of on the uDPU board are stopped working since
commit 78efa53e715e ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge
GPIO controller. These pins are part of the 'spi_quad' pin group
for which the 'spi' function is selected via the default pinctrl
state of the 'spi' node. This is wrong however, since in order to
allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected
first by the pinctrl core before probing the spi driver, but then
it gets overridden to 'gpio' implicitly via the
devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the
SPI subsystem, so the function of the pin group remains 'spi'
which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is
that the pinctrl state definition is wrong since its initial commit
0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins'
node to 'gpio' and move the pinctrl state definition from the
'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1
Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
If there is no stream data in file, v_len is zero.
So, If position(*pos) is zero, stream write will fail
due to stream write position validation check.
This patch reorganize stream write position validation.
Fixes: 0ca6df4f40cf ("ksmbd: prevent out-of-bounds stream writes by validating *pos")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull phy fixes from Vinod Koul:
"A bunch of renesas fixes and few smaller fixes in other drivers:
- Rensas fixes for unbind ole detection, irq, locking etc
- tegra fixes for error handling at init and UTMI power states and
stray unlock fix
- rockchip missing assignment and pll output fixes
- startfive usb host detection fixes"
* tag 'phy-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: Fix error handling in tegra_xusb_port_init
phy: renesas: rcar-gen3-usb2: Set timing registers only once
phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off
phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data
phy: renesas: rcar-gen3-usb2: Move IRQ request in probe
phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
phy: tegra: xusb: remove a stray unlock
phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error
phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure
phy: rockchip-samsung-dcphy: Add missing assignment
phy: can-transceiver: Re-instate "mux-states" property presence check
phy: qcom-qmp-ufs: check for mode type for phy setting
phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
Commit 157ae5ffd76a dmaengine: mediatek: Fix a possible deadlock error
in mtk_cqdma_tx_status() fixed locks but kept unused varibale leading to
warning and build failure (due to warning treated as errors)
drivers/dma/mediatek/mtk-cqdma.c: In function 'mtk_cqdma_find_active_desc':
drivers/dma/mediatek/mtk-cqdma.c:423:23: error: unused variable 'flags' [-Werror=unused-variable]
423 | unsigned long flags;
| ^~~~~
Fix by dropping this unused flag
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 157ae5ffd76a ("dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()")
Signed-off-by: Vinod Koul <vkoul@kernel.org>