tjh.dev
commits
Pull Kbuild fixes from Masahiro Yamada:
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
docs: Kconfig: fix defconfig description
kbuild: hdrcheck: fix cross build with clang
kbuild: userprogs: use correct lld when linking through clang
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues. These
contain:
- typec driver fixes
- dwc3 driver fixes
- xhci driver fixes
- renesas controller fixes
- gadget driver fixes
- a new USB quirk added
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer access
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
usb: xhci: Fix host controllers "dying" after suspend and resume
usb: dwc3: Set SUSPENDENABLE soon after phy init
usb: hub: lack of clearing xHC resources
usb: renesas_usbhs: Flush the notify_hotplug_work
usb: renesas_usbhs: Use devm_usb_get_phy()
usb: renesas_usbhs: Call clk_put()
usb: dwc3: gadget: Prevent irq storm when TH re-executes
usb: gadget: Check bmAttributes only if configuration is valid
xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts
usb: xhci: Enable the TRB overfetch quirk on VIA VL805
usb: gadget: Fix setting self-powered state on suspend
usb: typec: ucsi: increase timeout for PPM reset operations
acpi: typec: ucsi: Introduce a ->poll_cci method
usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
usb: gadget: Set self-powered based on MaxPower and bmAttributes
usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails
usb: atm: cxacru: fix a flaw in existing endpoint checks
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers pacman package fails
to build when "O=" is set. The build system complains:
/mnt/chroot/linux/scripts/Makefile.build:41: mnt/chroots/linux-mainline/pacman/linux-upstream/pkg/linux-upstream-headers/usr//lib/modules/6.14.0-rc3-00350-g771dba31fffc/build/scripts/Makefile: No such file or directory
This is because the "srcroot" variable is set to "." and the
"build" variable is set to the absolute path. This makes the
"src" variables point to wrong directory.
Change the "build" variable to a relative path to "." to
fix build.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull driver core fix from Greg KH:
"Here is a single driver core fix that resolves a reported memory leak.
It's been in linux-next for 2 weeks now with no reported problems"
* tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: fix device leak in __fw_devlink_relax_cycles()
Resources should be released only after all threads that utilize them
have been destroyed.
This commit ensures that resources are not released prematurely by waiting
for the associated workqueue to complete before deallocating them.
Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2a86f6612164 ("kbuild: use KBUILD_DEFCONFIG as the fallback
for DEFCONFIG_LIST") removed arch/$ARCH/defconfig; however,
the document has not been updated to reflect this change yet.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
Commit bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize
cycle detection logic") introduced a new struct device *con_dev and a
get_dev_from_fwnode() call to get it, but without adding a corresponding
put_device().
Closes: https://lore.kernel.org/all/20241204124826.2e055091@booty/
Fixes: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Cc: stable@vger.kernel.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250213-fix__fw_devlink_relax_cycles_missing_device_put-v2-1-8cd3b03e6a3f@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The headercheck tries to call clang with a mix of compiler arguments
that don't include the target architecture. When building e.g. x86
headers on arm64, this produces a warning like
clang: warning: unknown platform, assuming -mfloat-abi=soft
Add in the KBUILD_CPPFLAGS, which contain the target, in order to make it
build properly.
See also 1b71c2fb04e7 ("kbuild: userprogs: fix bitsize and target
detection on clang").
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772.
This commit was found responsible for issues with SD card recognition,
as users had to re-insert their cards in the readers and wait for a
while. As for some people the SD card was involved in the boot process
it also caused boot failures.
Cc: stable@vger.kernel.org
Link: https://bbs.archlinux.org/viewtopic.php?id=303321
Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection")
Reported-by: qf <quintafeira@tutanota.com>
Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20250224-revert-sdcard-patch-v1-1-d1a457fbb796@heusel.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent cleanup went a bit too far and dropped clearing the cycle bit
of link TRBs, so it stays different from the rest of the ring half of
the time. Then a race occurs: if the xHC reaches such link TRB before
more commands are queued, the link's cycle bit unintentionally matches
the xHC's cycle so it follows the link and waits for further commands.
If more commands are queued before the xHC gets there, inc_enq() flips
the bit so the xHC later sees a mismatch and stops executing commands.
This function is called before suspend and 50% of times after resuming
the xHC is doomed to get stuck sooner or later. Then some Stop Endpoint
command fails to complete in 5 seconds and this shows up
xhci_hcd 0000:00:10.0: xHCI host not responding to stop endpoint command
xhci_hcd 0000:00:10.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:10.0: HC died; cleaning up
followed by loss of all USB decives on the affected bus. That's if you
are lucky, because if Set Deq gets stuck instead, the failure is silent.
Likely responsible for kernel bug 219824. I found this while searching
for possible causes of that regression and reproduced it locally before
hearing back from the reporter. To repro, simply wait for link cycle to
become set (debugfs), then suspend, resume and wait. To accelerate the
failure I used a script which repeatedly starts and stops a UVC camera.
Some HCs get fully reinitialized on resume and they are not affected.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219824
Fixes: 36b972d4b7ce ("usb: xhci: improve xhci_clear_command_ring()")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250304113147.3322584-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The userprog infrastructure links objects files through $(CC).
Either explicitly by manually calling $(CC) on multiple object files or
implicitly by directly compiling a source file to an executable.
The documentation at Documentation/kbuild/llvm.rst indicates that ld.lld
would be used for linking if LLVM=1 is specified.
However clang instead will use either a globally installed cross linker
from $PATH called ${target}-ld or fall back to the system linker, which
probably does not support crosslinking.
For the normal kernel build this is not an issue because the linker is
always executed directly, without the compiler being involved.
Explicitly pass --ld-path to clang so $(LD) is respected.
As clang 13.0.1 is required to build the kernel, this option is available.
Fixes: 7f3a59db274c ("kbuild: add infrastructure to build userspace programs")
Cc: stable@vger.kernel.org # needs wrapping in $(cc-option) for < 6.9
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
GCC versions below 13 incorrectly detect the copy size as being static and too
small to fit in the "fds" array. Work around this by explicitly calculating the
size and returning EINVAL based on that, instead of based on the object count.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502072019.LYoCR9bF-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
--
Suggested-by as per Arnd's request, but the only thing I changed was preserving
array_size() [as noted by Geert in the linked thread]. I tested and found no
regressions.
v2: Add missing sign-off
Link: https://lore.kernel.org/r/20250220192334.549167-1-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
After phy initialization, some phy operations can only be executed while
in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and
GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking
phy ops.
Previously the SUSPENDENABLE bits are only set after the controller
initialization, which may not happen right away if there's no gadget
driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits
only when there's mode switching (change in GCTL.PRTCAPDIR).
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Cc: stable <stable@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/633aef0afee7d56d2316f7cc3e1b2a6d518a8cc9.1738280911.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull more x86 fixes from Ingo Molnar:
- Add more model IDs to the AMD microcode version check, more people
are hitting these checks
- Fix a Xen guest boot warning related to AMD northbridge setup
- Fix SEV guest bugs related to a recent changes in its locking logic
- Fix a missing definition of PTRS_PER_PMD that assembly builds can hit
* tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add some forgotten models to the SHA check
x86/mm: Define PTRS_PER_PMD for assembly code too
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
virt: sev-guest: Allocate request data dynamically
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
The variable "compact_result" is not initialized in function
__alloc_pages_slowpath(). It causes should_compact_retry() to use an
uninitialized value.
Initialize variable "compact_result" with the value COMPACT_SKIPPED.
BUG: KMSAN: uninit-value in __alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
alloc_pages_mpol+0x4cd/0x890 mm/mempolicy.c:2270
alloc_frozen_pages_noprof mm/mempolicy.c:2341 [inline]
alloc_pages_noprof mm/mempolicy.c:2361 [inline]
folio_alloc_noprof+0x1dc/0x350 mm/mempolicy.c:2371
filemap_alloc_folio_noprof+0xa6/0x440 mm/filemap.c:1019
__filemap_get_folio+0xb9a/0x1840 mm/filemap.c:1970
grow_dev_folio fs/buffer.c:1039 [inline]
grow_buffers fs/buffer.c:1105 [inline]
__getblk_slow fs/buffer.c:1131 [inline]
bdev_getblk+0x2c9/0xab0 fs/buffer.c:1431
getblk_unmovable include/linux/buffer_head.h:369 [inline]
ext4_getblk+0x3b7/0xe50 fs/ext4/inode.c:864
ext4_bread_batch+0x9f/0x7d0 fs/ext4/inode.c:933
__ext4_find_entry+0x1ebb/0x36c0 fs/ext4/namei.c:1627
ext4_lookup_entry fs/ext4/namei.c:1729 [inline]
ext4_lookup+0x189/0xb40 fs/ext4/namei.c:1797
__lookup_slow+0x538/0x710 fs/namei.c:1793
lookup_slow+0x6a/0xd0 fs/namei.c:1810
walk_component fs/namei.c:2114 [inline]
link_path_walk+0xf29/0x1420 fs/namei.c:2479
path_openat+0x30f/0x6250 fs/namei.c:3985
do_filp_open+0x268/0x600 fs/namei.c:4016
do_sys_openat2+0x1bf/0x2f0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x2a1/0x310 fs/open.c:1454
x64_sys_call+0x36f5/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:258
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable compact_result created at:
__alloc_pages_slowpath+0x66/0x16c0 mm/page_alloc.c:4218
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
Link: https://lkml.kernel.org/r/tencent_ED1032321D6510B145CDBA8CBA0093178E09@qq.com
Reported-by: syzbot+0cfd5e38e96a5596f2b6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0cfd5e38e96a5596f2b6
Signed-off-by: Hao Zhang <zhanghao1@kylinos.cn>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KVM/arm64 fixes for 6.14, take #4
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
Fix a goof where KVM sets CPUID.0x80000022.EAX to CPUID.0x80000022.EBX
instead of zeroing both when PERFMON_V2 isn't supported by KVM. In
practice, barring a buggy CPU (or vCPU model when running nested) only the
!enable_pmu case is affected, as KVM always supports PERFMON_V2 if it's
available in hardware, i.e. CPUID.0x80000022.EBX will be '0' if PERFMON_V2
is unsupported.
For the !enable_pmu case, the bug is relatively benign as KVM will refuse
to enable PMU capabilities, but a VMM that reflects KVM's supported CPUID
into the guest could inadvertently induce #GPs in the guest due to
advertising support for MSRs that KVM refuses to emulate.
Fixes: 94cdeebd8211 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-3-xiaoyao.li@intel.com
[sean: massage shortlog and changelog, tag for stable]
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
The simple-pm-bus driver only enables runtime PM for some buses
('simple-pm-bus') yet has started calling pm_runtime_force_suspend() and
pm_runtime_force_resume() during system suspend unconditionally.
This currently works, but that is not obvious and depends on
implementation details which may change at some point.
Add dedicated system sleep ops and only call pm_runtime_force_suspend()
and pm_runtime_force_resume() for buses that use runtime PM to avoid any
future surprises.
Fixes: c45839309c3d ("drivers: bus: simple-pm-bus: Use clocks")
Cc: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250214102130.3000-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Namely: s/becasue/because/ and s/wiht/with/ plus an added article.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The xHC resources allocated for USB devices are not released in correct
order after resuming in case when while suspend device was reconnected.
This issue has been detected during the fallowing scenario:
- connect hub HS to root port
- connect LS/FS device to hub port
- wait for enumeration to finish
- force host to suspend
- reconnect hub attached to root port
- wake host
For this scenario during enumeration of USB LS/FS device the Cadence xHC
reports completion error code for xHC commands because the xHC resources
used for devices has not been properly released.
XHCI specification doesn't mention that device can be reset in any order
so, we should not treat this issue as Cadence xHC controller bug.
Similar as during disconnecting in this case the device resources should
be cleared starting form the last usb device in tree toward the root hub.
To fix this issue usbcore driver should call hcd->driver->reset_device
for all USB devices connected to hub which was reconnected while
suspending.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/PH7PR07MB953841E38C088678ACDCF6EEDDCC2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull dmaengine fixes from Vinod Koul:
- tegra210 div_u64 divison and max page fixes
- revert Qualcomm unavailable register workaround which is causing
regression, fixes have been proposed but still gaps are present so
revert this for now
* tag 'dmaengine-fix-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: Revert "dmaengine: qcom: bam_dma: Avoid writing unavailable register"
dmaengine: tegra210-adma: check for adma max page
dmaengine: tegra210-adma: Use div_u64 for 64 bit division
Pull LoongArch fixes from Huacai Chen:
"Fix bugs in kernel build, hibernation, memory management and KVM"
* tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix GPA size issue about VM
LoongArch: KVM: Reload guest CSR registers after sleep
LoongArch: KVM: Add interrupt checking for AVEC
LoongArch: Set hugetlb mmap base address aligned with pmd size
LoongArch: Set max_pfn with the PFN of the last page
LoongArch: Use polling play_dead() when resuming from hibernation
LoongArch: Eliminate superfluous get_numa_distances_cnt()
LoongArch: Convert unreachable() to BUG()
Add some more forgotten models to the SHA check.
Fixes: 50cef76d5cb0 ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lore.kernel.org/r/20250307220256.11816-1-bp@kernel.org
The return value of rio_add_net() should be checked. If it fails,
put_device() should be called to free the memory and give up the reference
initialized in rio_add_net().
Link: https://lkml.kernel.org/r/20250227041131.3680761-1-haoxiang_li2024@163.com
Fixes: e6b585ca6e81 ("rapidio: move net allocation into core code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM is in protected mode, host calls to PSCI are proxied via EL2,
and cold entries from CPU_ON, CPU_SUSPEND, and SYSTEM_SUSPEND bounce
through __kvm_hyp_init_cpu() at EL2 before entering the host kernel's
entry point at EL1. While __kvm_hyp_init_cpu() initializes SPSR_EL2 for
the exception return to EL1, it does not initialize SCTLR_EL1.
Due to this, it's possible to enter EL1 with SCTLR_EL1 in an UNKNOWN
state. In practice this has been seen to result in kernel crashes after
CPU_ON as a result of SCTLR_EL1.M being 1 in violation of the initial
core configuration specified by PSCI.
Fix this by initializing SCTLR_EL1 for cold entry to the host kernel.
As it's necessary to write to SCTLR_EL12 in VHE mode, this
initialization is moved into __kvm_host_psci_cpu_entry() where we can
use write_sysreg_el1().
The remnants of the '__init_el2_nvhe_prepare_eret' macro are folded into
its only caller, as this is clearer than having the macro.
Fixes: cdf367192766ad11 ("KVM: arm64: Intercept host's CPU_ON SMCs")
Reported-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ahmed Genidi <ahmed.genidi@arm.com>
[ Mark: clarify commit message, handle E2H, move to C, remove macro ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250227180526.1204723-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Print out the index of mismatching XSAVE bytes using unsigned decimal
format. Some versions of clang complain about trying to print an integer
as an unsigned char.
x86/sev_smoke_test.c:55:51: error: format specifies type 'unsigned char'
but the argument has type 'int' [-Werror,-Wformat]
Fixes: 8c53183dbaa2 ("selftests: kvm: add test for transferring FPU state into VMSA")
Link: https://lore.kernel.org/r/20250228233852.3855676-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When creating sysfs files fail, the allocated minor must be freed such that
it can be later reused. That is specially harmful for static minor numbers,
since those would always fail to register later on.
Fixes: 6d04d2b554b1 ("misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors")
Cc: stable <stable@kernel.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250123123249.4081674-5-cascardo@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported problems.
Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed
0-day testing"
* tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix fifo underflow on flush
serial: 8250_pnp: Remove unneeded ->iotype assignment
serial: 8250_platform: Remove unneeded ->iotype assignment
serial: 8250_of: Remove unneeded ->iotype assignment
serial: port: Make ->iotype validation global in __uart_read_properties()
serial: port: Always update ->iotype in __uart_read_properties()
serial: port: Assign ->iotype correctly when ->iobase is set
serial: sc16is7xx: Fix IRQ number check behavior
This introduces a module for working with faux devices in rust, along with
adding sample code to show how the API is used. Unlike other types of
devices, we don't provide any hooks for device probe/removal - since these
are optional for the faux API and are unnecessary in rust.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When performing continuous unbind/bind operations on the USB drivers
available on the Renesas RZ/G2L SoC, a kernel crash with the message
"Unable to handle kernel NULL pointer dereference at virtual address"
may occur. This issue points to the usbhsc_notify_hotplug() function.
Flush the delayed work to avoid its execution when driver resources are
unavailable.
Fixes: bc57381e6347 ("usb: renesas_usbhs: use delayed_work instead of work_struct")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull phy fixes from Vinod Koul:
- rockchip phy kconfig dependency fix with USB_COMMON and regression
fix for old DT
- stm32 phy overflow assertion fix
- exonysfs phy refclk masks fix and power gate on exit fix
- freescale fix for clock dividor valid range
- TI regmap syscon register fix
- tegra reset registers on init fix
* tag 'phy-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: reset VBUS & ID OVERRIDE
phy: ti: gmii-sel: Do not use syscon helper to build regmap
phy: exynos5-usbdrd: gs101: ensure power is gated to SS phy in phy_exit()
phy: freescale: fsl-samsung-hdmi: Limit PLL lock detection clock divider to valid range
phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk
phy: stm32: Fix constant-value overflow assertion
phy: rockchip: naneng-combphy: compatible reset with old DT
phy: rockchip: fix Kconfig dependency more
This commit causes a hard crash on sdm845 and likely other platforms.
Revert it until a proper fix is found.
This reverts commit 57a7138d0627: ("dmaengine: qcom: bam_dma: Avoid writing
unavailable register")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Fixes: 57a7138d0627 ("dmaengine: qcom: bam_dma: Avoid writing unavailable register")
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-DB845c
Tested-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20250208223112.142567-1-caleb.connolly@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
Physical address space is 48 bit on Loongson-3A5000 physical machine,
however it is 47 bit for VM on Loongson-3A5000 system. Size of physical
address space of VM is the same with the size of virtual user space (a
half) of physical machine.
Variable cpu_vabits represents user address space, kernel address space
is not included (user space and kernel space are both a half of total).
Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of
guest physical address space.
Also there is strict checking about page fault GPA address, inject error
if it is larger than maximum GPA address of VM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
rio_add_net() calls device_register() and fails when device_register()
fails. Thus, put_device() should be used rather than kfree(). Add
"mport->net = NULL;" to avoid a use after free issue.
Link: https://lkml.kernel.org/r/20250227073409.3696854-1-haoxiang_li2024@163.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lets callers distinguish why the vhost task creation failed. No one
currently cares why it failed, so no real runtime change from this
patch, but that will not be the case for long.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-2-kbusch@meta.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On CPUs without FEAT_E2H0, HCR_EL2.E2H is RES1, but may reset to an
UNKNOWN value out of reset and consequently may not read as 1 unless it
has been explicitly initialized.
We handled this for the head.S boot code in commits:
3944382fa6f22b54 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
b3320142f3db9b3f ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Unfortunately, we forgot to apply a similar fix to the KVM PSCI entry
points used when relaying CPU_ON, CPU_SUSPEND, and SYSTEM SUSPEND. When
KVM is entered via these entry points, the value of HCR_EL2.E2H may be
consumed before it has been initialized (e.g. by the 'init_el2_state'
macro).
Initialize HCR_EL2.E2H early in these paths such that it can be consumed
reliably. The existing code in head.S is factored out into a new
'init_el2_hcr' macro, and this is used in the __kvm_hyp_init_cpu()
function common to all the relevant PSCI entry points.
For clarity, I've tweaked the assembly used to check whether
ID_AA64MMFR4_EL1.E2H0 is negative. The bitfield is extracted as a signed
value, and this is checked with a signed-greater-or-equal (GE) comparison.
As the hyp code will reconfigure HCR_EL2 later in ___kvm_hyp_init(), all
bits other than E2H are initialized to zero in __kvm_hyp_init_cpu().
Fixes: 3944382fa6f22b54 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
Fixes: b3320142f3db9b3f ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250227180526.1204723-2-mark.rutland@arm.com
[maz: fixed LT->GE thinko]
Signed-off-by: Marc Zyngier <maz@kernel.org>
During the initial mprotect(RO) stage of mmu_stress_test, keep vCPUs
spinning until all vCPUs have hit -EFAULT, i.e. until all vCPUs have tried
to write to a read-only page. If a vCPU manages to complete an entire
iteration of the loop without hitting a read-only page, *and* the vCPU
observes mprotect_ro_done before starting a second iteration, then the
vCPU will prematurely fall through to GUEST_SYNC(3) (on x86 and arm64) and
get out of sequence.
Replace the "do-while (!r)" loop around the associated _vcpu_run() with
a single invocation, as barring a KVM bug, the vCPU is guaranteed to hit
-EFAULT, and retrying on success is super confusion, hides KVM bugs, and
complicates this fix. The do-while loop was semi-unintentionally added
specifically to fudge around a KVM x86 bug, and said bug is unhittable
without modifying the test to force x86 down the !(x86||arm64) path.
On x86, if forced emulation is enabled, vcpu_arch_put_guest() may trigger
emulation of the store to memory. Due a (very, very) longstanding bug in
KVM x86's emulator, emulate writes to guest memory that fail during
__kvm_write_guest_page() unconditionally return KVM_EXIT_MMIO. While that
is desirable in the !memslot case, it's wrong in this case as the failure
happens due to __copy_to_user() hitting a read-only page, not an emulated
MMIO region.
But as above, x86 only uses vcpu_arch_put_guest() if the __x86_64__ guards
are clobbered to force x86 down the common path, and of course the
unexpected MMIO is a KVM bug, i.e. *should* cause a test failure.
Fixes: b6c304aec648 ("KVM: selftests: Verify KVM correctly handles mprotect(PROT_READ)")
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/20250208105318.16861-1-yan.y.zhao@intel.com
Debugged-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250228230804.3845860-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.
Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers Debian package fails to
build when $(CC) cannot build userspace applications, for example,
when using toolchains installed by the 0day bot.
The host programs in the linux-headers package should be rebuilt using
the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC).
Hence, the variable 'CC' must be expanded in this shell script instead
of in the top-level Makefile.
Commit f354fc88a72a ("kbuild: install-extmod-build: add missing
quotation marks for CC variable") was not a correct fix because
CC="ccache gcc" should be unrelated when rebuilding userspace tools.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The gpriv->transceiver is retrieved in probe() through usb_get_phy() but
never released. Use devm_usb_get_phy() to handle this scenario.
This issue was identified through code investigation. No issue was found
without this change.
Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull gpio fix from Bartosz Golaszewski:
- fix a buggy get_direction() retval check
* tag 'gpio-fixes-for-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix Oops in gpiod_direction_input_nonotify()
Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.
For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.
[ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[ 173.765837] usb usb3-port2: config error
Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.
Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591
Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
Signed-off-by: Henry Lin <henryl@nvidia.com>
Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Have additional check for max channel page during the probe
to cover if any offset overshoot happens due to wrong DT
configuration.
Fixes: 68811c928f88 ("dmaengine: tegra210-adma: Support channel page")
Cc: stable@vger.kernel.org
Signed-off-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250210135413.2504272-3-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
docs: Kconfig: fix defconfig description
kbuild: hdrcheck: fix cross build with clang
kbuild: userprogs: use correct lld when linking through clang
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues. These
contain:
- typec driver fixes
- dwc3 driver fixes
- xhci driver fixes
- renesas controller fixes
- gadget driver fixes
- a new USB quirk added
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer access
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
usb: xhci: Fix host controllers "dying" after suspend and resume
usb: dwc3: Set SUSPENDENABLE soon after phy init
usb: hub: lack of clearing xHC resources
usb: renesas_usbhs: Flush the notify_hotplug_work
usb: renesas_usbhs: Use devm_usb_get_phy()
usb: renesas_usbhs: Call clk_put()
usb: dwc3: gadget: Prevent irq storm when TH re-executes
usb: gadget: Check bmAttributes only if configuration is valid
xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts
usb: xhci: Enable the TRB overfetch quirk on VIA VL805
usb: gadget: Fix setting self-powered state on suspend
usb: typec: ucsi: increase timeout for PPM reset operations
acpi: typec: ucsi: Introduce a ->poll_cci method
usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
usb: gadget: Set self-powered based on MaxPower and bmAttributes
usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails
usb: atm: cxacru: fix a flaw in existing endpoint checks
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers pacman package fails
to build when "O=" is set. The build system complains:
/mnt/chroot/linux/scripts/Makefile.build:41: mnt/chroots/linux-mainline/pacman/linux-upstream/pkg/linux-upstream-headers/usr//lib/modules/6.14.0-rc3-00350-g771dba31fffc/build/scripts/Makefile: No such file or directory
This is because the "srcroot" variable is set to "." and the
"build" variable is set to the absolute path. This makes the
"src" variables point to wrong directory.
Change the "build" variable to a relative path to "." to
fix build.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull driver core fix from Greg KH:
"Here is a single driver core fix that resolves a reported memory leak.
It's been in linux-next for 2 weeks now with no reported problems"
* tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: fix device leak in __fw_devlink_relax_cycles()
Resources should be released only after all threads that utilize them
have been destroyed.
This commit ensures that resources are not released prematurely by waiting
for the associated workqueue to complete before deallocating them.
Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
Commit bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize
cycle detection logic") introduced a new struct device *con_dev and a
get_dev_from_fwnode() call to get it, but without adding a corresponding
put_device().
Closes: https://lore.kernel.org/all/20241204124826.2e055091@booty/
Fixes: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Cc: stable@vger.kernel.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250213-fix__fw_devlink_relax_cycles_missing_device_put-v2-1-8cd3b03e6a3f@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The headercheck tries to call clang with a mix of compiler arguments
that don't include the target architecture. When building e.g. x86
headers on arm64, this produces a warning like
clang: warning: unknown platform, assuming -mfloat-abi=soft
Add in the KBUILD_CPPFLAGS, which contain the target, in order to make it
build properly.
See also 1b71c2fb04e7 ("kbuild: userprogs: fix bitsize and target
detection on clang").
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772.
This commit was found responsible for issues with SD card recognition,
as users had to re-insert their cards in the readers and wait for a
while. As for some people the SD card was involved in the boot process
it also caused boot failures.
Cc: stable@vger.kernel.org
Link: https://bbs.archlinux.org/viewtopic.php?id=303321
Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection")
Reported-by: qf <quintafeira@tutanota.com>
Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20250224-revert-sdcard-patch-v1-1-d1a457fbb796@heusel.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent cleanup went a bit too far and dropped clearing the cycle bit
of link TRBs, so it stays different from the rest of the ring half of
the time. Then a race occurs: if the xHC reaches such link TRB before
more commands are queued, the link's cycle bit unintentionally matches
the xHC's cycle so it follows the link and waits for further commands.
If more commands are queued before the xHC gets there, inc_enq() flips
the bit so the xHC later sees a mismatch and stops executing commands.
This function is called before suspend and 50% of times after resuming
the xHC is doomed to get stuck sooner or later. Then some Stop Endpoint
command fails to complete in 5 seconds and this shows up
xhci_hcd 0000:00:10.0: xHCI host not responding to stop endpoint command
xhci_hcd 0000:00:10.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:10.0: HC died; cleaning up
followed by loss of all USB decives on the affected bus. That's if you
are lucky, because if Set Deq gets stuck instead, the failure is silent.
Likely responsible for kernel bug 219824. I found this while searching
for possible causes of that regression and reproduced it locally before
hearing back from the reporter. To repro, simply wait for link cycle to
become set (debugfs), then suspend, resume and wait. To accelerate the
failure I used a script which repeatedly starts and stops a UVC camera.
Some HCs get fully reinitialized on resume and they are not affected.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219824
Fixes: 36b972d4b7ce ("usb: xhci: improve xhci_clear_command_ring()")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250304113147.3322584-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The userprog infrastructure links objects files through $(CC).
Either explicitly by manually calling $(CC) on multiple object files or
implicitly by directly compiling a source file to an executable.
The documentation at Documentation/kbuild/llvm.rst indicates that ld.lld
would be used for linking if LLVM=1 is specified.
However clang instead will use either a globally installed cross linker
from $PATH called ${target}-ld or fall back to the system linker, which
probably does not support crosslinking.
For the normal kernel build this is not an issue because the linker is
always executed directly, without the compiler being involved.
Explicitly pass --ld-path to clang so $(LD) is respected.
As clang 13.0.1 is required to build the kernel, this option is available.
Fixes: 7f3a59db274c ("kbuild: add infrastructure to build userspace programs")
Cc: stable@vger.kernel.org # needs wrapping in $(cc-option) for < 6.9
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
GCC versions below 13 incorrectly detect the copy size as being static and too
small to fit in the "fds" array. Work around this by explicitly calculating the
size and returning EINVAL based on that, instead of based on the object count.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502072019.LYoCR9bF-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
--
Suggested-by as per Arnd's request, but the only thing I changed was preserving
array_size() [as noted by Geert in the linked thread]. I tested and found no
regressions.
v2: Add missing sign-off
Link: https://lore.kernel.org/r/20250220192334.549167-1-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
After phy initialization, some phy operations can only be executed while
in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and
GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking
phy ops.
Previously the SUSPENDENABLE bits are only set after the controller
initialization, which may not happen right away if there's no gadget
driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits
only when there's mode switching (change in GCTL.PRTCAPDIR).
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Cc: stable <stable@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/633aef0afee7d56d2316f7cc3e1b2a6d518a8cc9.1738280911.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull more x86 fixes from Ingo Molnar:
- Add more model IDs to the AMD microcode version check, more people
are hitting these checks
- Fix a Xen guest boot warning related to AMD northbridge setup
- Fix SEV guest bugs related to a recent changes in its locking logic
- Fix a missing definition of PTRS_PER_PMD that assembly builds can hit
* tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add some forgotten models to the SHA check
x86/mm: Define PTRS_PER_PMD for assembly code too
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
virt: sev-guest: Allocate request data dynamically
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
The variable "compact_result" is not initialized in function
__alloc_pages_slowpath(). It causes should_compact_retry() to use an
uninitialized value.
Initialize variable "compact_result" with the value COMPACT_SKIPPED.
BUG: KMSAN: uninit-value in __alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_pages_slowpath+0xee8/0x16c0 mm/page_alloc.c:4416
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
alloc_pages_mpol+0x4cd/0x890 mm/mempolicy.c:2270
alloc_frozen_pages_noprof mm/mempolicy.c:2341 [inline]
alloc_pages_noprof mm/mempolicy.c:2361 [inline]
folio_alloc_noprof+0x1dc/0x350 mm/mempolicy.c:2371
filemap_alloc_folio_noprof+0xa6/0x440 mm/filemap.c:1019
__filemap_get_folio+0xb9a/0x1840 mm/filemap.c:1970
grow_dev_folio fs/buffer.c:1039 [inline]
grow_buffers fs/buffer.c:1105 [inline]
__getblk_slow fs/buffer.c:1131 [inline]
bdev_getblk+0x2c9/0xab0 fs/buffer.c:1431
getblk_unmovable include/linux/buffer_head.h:369 [inline]
ext4_getblk+0x3b7/0xe50 fs/ext4/inode.c:864
ext4_bread_batch+0x9f/0x7d0 fs/ext4/inode.c:933
__ext4_find_entry+0x1ebb/0x36c0 fs/ext4/namei.c:1627
ext4_lookup_entry fs/ext4/namei.c:1729 [inline]
ext4_lookup+0x189/0xb40 fs/ext4/namei.c:1797
__lookup_slow+0x538/0x710 fs/namei.c:1793
lookup_slow+0x6a/0xd0 fs/namei.c:1810
walk_component fs/namei.c:2114 [inline]
link_path_walk+0xf29/0x1420 fs/namei.c:2479
path_openat+0x30f/0x6250 fs/namei.c:3985
do_filp_open+0x268/0x600 fs/namei.c:4016
do_sys_openat2+0x1bf/0x2f0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x2a1/0x310 fs/open.c:1454
x64_sys_call+0x36f5/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:258
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable compact_result created at:
__alloc_pages_slowpath+0x66/0x16c0 mm/page_alloc.c:4218
__alloc_frozen_pages_noprof+0xa4c/0xe00 mm/page_alloc.c:4752
Link: https://lkml.kernel.org/r/tencent_ED1032321D6510B145CDBA8CBA0093178E09@qq.com
Reported-by: syzbot+0cfd5e38e96a5596f2b6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0cfd5e38e96a5596f2b6
Signed-off-by: Hao Zhang <zhanghao1@kylinos.cn>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix a goof where KVM sets CPUID.0x80000022.EAX to CPUID.0x80000022.EBX
instead of zeroing both when PERFMON_V2 isn't supported by KVM. In
practice, barring a buggy CPU (or vCPU model when running nested) only the
!enable_pmu case is affected, as KVM always supports PERFMON_V2 if it's
available in hardware, i.e. CPUID.0x80000022.EBX will be '0' if PERFMON_V2
is unsupported.
For the !enable_pmu case, the bug is relatively benign as KVM will refuse
to enable PMU capabilities, but a VMM that reflects KVM's supported CPUID
into the guest could inadvertently induce #GPs in the guest due to
advertising support for MSRs that KVM refuses to emulate.
Fixes: 94cdeebd8211 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-3-xiaoyao.li@intel.com
[sean: massage shortlog and changelog, tag for stable]
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
The simple-pm-bus driver only enables runtime PM for some buses
('simple-pm-bus') yet has started calling pm_runtime_force_suspend() and
pm_runtime_force_resume() during system suspend unconditionally.
This currently works, but that is not obvious and depends on
implementation details which may change at some point.
Add dedicated system sleep ops and only call pm_runtime_force_suspend()
and pm_runtime_force_resume() for buses that use runtime PM to avoid any
future surprises.
Fixes: c45839309c3d ("drivers: bus: simple-pm-bus: Use clocks")
Cc: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250214102130.3000-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
The xHC resources allocated for USB devices are not released in correct
order after resuming in case when while suspend device was reconnected.
This issue has been detected during the fallowing scenario:
- connect hub HS to root port
- connect LS/FS device to hub port
- wait for enumeration to finish
- force host to suspend
- reconnect hub attached to root port
- wake host
For this scenario during enumeration of USB LS/FS device the Cadence xHC
reports completion error code for xHC commands because the xHC resources
used for devices has not been properly released.
XHCI specification doesn't mention that device can be reset in any order
so, we should not treat this issue as Cadence xHC controller bug.
Similar as during disconnecting in this case the device resources should
be cleared starting form the last usb device in tree toward the root hub.
To fix this issue usbcore driver should call hcd->driver->reset_device
for all USB devices connected to hub which was reconnected while
suspending.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/PH7PR07MB953841E38C088678ACDCF6EEDDCC2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull dmaengine fixes from Vinod Koul:
- tegra210 div_u64 divison and max page fixes
- revert Qualcomm unavailable register workaround which is causing
regression, fixes have been proposed but still gaps are present so
revert this for now
* tag 'dmaengine-fix-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: Revert "dmaengine: qcom: bam_dma: Avoid writing unavailable register"
dmaengine: tegra210-adma: check for adma max page
dmaengine: tegra210-adma: Use div_u64 for 64 bit division
Pull LoongArch fixes from Huacai Chen:
"Fix bugs in kernel build, hibernation, memory management and KVM"
* tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix GPA size issue about VM
LoongArch: KVM: Reload guest CSR registers after sleep
LoongArch: KVM: Add interrupt checking for AVEC
LoongArch: Set hugetlb mmap base address aligned with pmd size
LoongArch: Set max_pfn with the PFN of the last page
LoongArch: Use polling play_dead() when resuming from hibernation
LoongArch: Eliminate superfluous get_numa_distances_cnt()
LoongArch: Convert unreachable() to BUG()
Add some more forgotten models to the SHA check.
Fixes: 50cef76d5cb0 ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lore.kernel.org/r/20250307220256.11816-1-bp@kernel.org
The return value of rio_add_net() should be checked. If it fails,
put_device() should be called to free the memory and give up the reference
initialized in rio_add_net().
Link: https://lkml.kernel.org/r/20250227041131.3680761-1-haoxiang_li2024@163.com
Fixes: e6b585ca6e81 ("rapidio: move net allocation into core code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM is in protected mode, host calls to PSCI are proxied via EL2,
and cold entries from CPU_ON, CPU_SUSPEND, and SYSTEM_SUSPEND bounce
through __kvm_hyp_init_cpu() at EL2 before entering the host kernel's
entry point at EL1. While __kvm_hyp_init_cpu() initializes SPSR_EL2 for
the exception return to EL1, it does not initialize SCTLR_EL1.
Due to this, it's possible to enter EL1 with SCTLR_EL1 in an UNKNOWN
state. In practice this has been seen to result in kernel crashes after
CPU_ON as a result of SCTLR_EL1.M being 1 in violation of the initial
core configuration specified by PSCI.
Fix this by initializing SCTLR_EL1 for cold entry to the host kernel.
As it's necessary to write to SCTLR_EL12 in VHE mode, this
initialization is moved into __kvm_host_psci_cpu_entry() where we can
use write_sysreg_el1().
The remnants of the '__init_el2_nvhe_prepare_eret' macro are folded into
its only caller, as this is clearer than having the macro.
Fixes: cdf367192766ad11 ("KVM: arm64: Intercept host's CPU_ON SMCs")
Reported-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ahmed Genidi <ahmed.genidi@arm.com>
[ Mark: clarify commit message, handle E2H, move to C, remove macro ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250227180526.1204723-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Print out the index of mismatching XSAVE bytes using unsigned decimal
format. Some versions of clang complain about trying to print an integer
as an unsigned char.
x86/sev_smoke_test.c:55:51: error: format specifies type 'unsigned char'
but the argument has type 'int' [-Werror,-Wformat]
Fixes: 8c53183dbaa2 ("selftests: kvm: add test for transferring FPU state into VMSA")
Link: https://lore.kernel.org/r/20250228233852.3855676-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When creating sysfs files fail, the allocated minor must be freed such that
it can be later reused. That is specially harmful for static minor numbers,
since those would always fail to register later on.
Fixes: 6d04d2b554b1 ("misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors")
Cc: stable <stable@kernel.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250123123249.4081674-5-cascardo@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported problems.
Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed
0-day testing"
* tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix fifo underflow on flush
serial: 8250_pnp: Remove unneeded ->iotype assignment
serial: 8250_platform: Remove unneeded ->iotype assignment
serial: 8250_of: Remove unneeded ->iotype assignment
serial: port: Make ->iotype validation global in __uart_read_properties()
serial: port: Always update ->iotype in __uart_read_properties()
serial: port: Assign ->iotype correctly when ->iobase is set
serial: sc16is7xx: Fix IRQ number check behavior
This introduces a module for working with faux devices in rust, along with
adding sample code to show how the API is used. Unlike other types of
devices, we don't provide any hooks for device probe/removal - since these
are optional for the faux API and are unnecessary in rust.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When performing continuous unbind/bind operations on the USB drivers
available on the Renesas RZ/G2L SoC, a kernel crash with the message
"Unable to handle kernel NULL pointer dereference at virtual address"
may occur. This issue points to the usbhsc_notify_hotplug() function.
Flush the delayed work to avoid its execution when driver resources are
unavailable.
Fixes: bc57381e6347 ("usb: renesas_usbhs: use delayed_work instead of work_struct")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull phy fixes from Vinod Koul:
- rockchip phy kconfig dependency fix with USB_COMMON and regression
fix for old DT
- stm32 phy overflow assertion fix
- exonysfs phy refclk masks fix and power gate on exit fix
- freescale fix for clock dividor valid range
- TI regmap syscon register fix
- tegra reset registers on init fix
* tag 'phy-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: reset VBUS & ID OVERRIDE
phy: ti: gmii-sel: Do not use syscon helper to build regmap
phy: exynos5-usbdrd: gs101: ensure power is gated to SS phy in phy_exit()
phy: freescale: fsl-samsung-hdmi: Limit PLL lock detection clock divider to valid range
phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk
phy: stm32: Fix constant-value overflow assertion
phy: rockchip: naneng-combphy: compatible reset with old DT
phy: rockchip: fix Kconfig dependency more
This commit causes a hard crash on sdm845 and likely other platforms.
Revert it until a proper fix is found.
This reverts commit 57a7138d0627: ("dmaengine: qcom: bam_dma: Avoid writing
unavailable register")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Fixes: 57a7138d0627 ("dmaengine: qcom: bam_dma: Avoid writing unavailable register")
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-DB845c
Tested-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20250208223112.142567-1-caleb.connolly@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
Physical address space is 48 bit on Loongson-3A5000 physical machine,
however it is 47 bit for VM on Loongson-3A5000 system. Size of physical
address space of VM is the same with the size of virtual user space (a
half) of physical machine.
Variable cpu_vabits represents user address space, kernel address space
is not included (user space and kernel space are both a half of total).
Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of
guest physical address space.
Also there is strict checking about page fault GPA address, inject error
if it is larger than maximum GPA address of VM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
rio_add_net() calls device_register() and fails when device_register()
fails. Thus, put_device() should be used rather than kfree(). Add
"mport->net = NULL;" to avoid a use after free issue.
Link: https://lkml.kernel.org/r/20250227073409.3696854-1-haoxiang_li2024@163.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lets callers distinguish why the vhost task creation failed. No one
currently cares why it failed, so no real runtime change from this
patch, but that will not be the case for long.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-2-kbusch@meta.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On CPUs without FEAT_E2H0, HCR_EL2.E2H is RES1, but may reset to an
UNKNOWN value out of reset and consequently may not read as 1 unless it
has been explicitly initialized.
We handled this for the head.S boot code in commits:
3944382fa6f22b54 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
b3320142f3db9b3f ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Unfortunately, we forgot to apply a similar fix to the KVM PSCI entry
points used when relaying CPU_ON, CPU_SUSPEND, and SYSTEM SUSPEND. When
KVM is entered via these entry points, the value of HCR_EL2.E2H may be
consumed before it has been initialized (e.g. by the 'init_el2_state'
macro).
Initialize HCR_EL2.E2H early in these paths such that it can be consumed
reliably. The existing code in head.S is factored out into a new
'init_el2_hcr' macro, and this is used in the __kvm_hyp_init_cpu()
function common to all the relevant PSCI entry points.
For clarity, I've tweaked the assembly used to check whether
ID_AA64MMFR4_EL1.E2H0 is negative. The bitfield is extracted as a signed
value, and this is checked with a signed-greater-or-equal (GE) comparison.
As the hyp code will reconfigure HCR_EL2 later in ___kvm_hyp_init(), all
bits other than E2H are initialized to zero in __kvm_hyp_init_cpu().
Fixes: 3944382fa6f22b54 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
Fixes: b3320142f3db9b3f ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250227180526.1204723-2-mark.rutland@arm.com
[maz: fixed LT->GE thinko]
Signed-off-by: Marc Zyngier <maz@kernel.org>
During the initial mprotect(RO) stage of mmu_stress_test, keep vCPUs
spinning until all vCPUs have hit -EFAULT, i.e. until all vCPUs have tried
to write to a read-only page. If a vCPU manages to complete an entire
iteration of the loop without hitting a read-only page, *and* the vCPU
observes mprotect_ro_done before starting a second iteration, then the
vCPU will prematurely fall through to GUEST_SYNC(3) (on x86 and arm64) and
get out of sequence.
Replace the "do-while (!r)" loop around the associated _vcpu_run() with
a single invocation, as barring a KVM bug, the vCPU is guaranteed to hit
-EFAULT, and retrying on success is super confusion, hides KVM bugs, and
complicates this fix. The do-while loop was semi-unintentionally added
specifically to fudge around a KVM x86 bug, and said bug is unhittable
without modifying the test to force x86 down the !(x86||arm64) path.
On x86, if forced emulation is enabled, vcpu_arch_put_guest() may trigger
emulation of the store to memory. Due a (very, very) longstanding bug in
KVM x86's emulator, emulate writes to guest memory that fail during
__kvm_write_guest_page() unconditionally return KVM_EXIT_MMIO. While that
is desirable in the !memslot case, it's wrong in this case as the failure
happens due to __copy_to_user() hitting a read-only page, not an emulated
MMIO region.
But as above, x86 only uses vcpu_arch_put_guest() if the __x86_64__ guards
are clobbered to force x86 down the common path, and of course the
unexpected MMIO is a KVM bug, i.e. *should* cause a test failure.
Fixes: b6c304aec648 ("KVM: selftests: Verify KVM correctly handles mprotect(PROT_READ)")
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/20250208105318.16861-1-yan.y.zhao@intel.com
Debugged-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250228230804.3845860-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.
Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers Debian package fails to
build when $(CC) cannot build userspace applications, for example,
when using toolchains installed by the 0day bot.
The host programs in the linux-headers package should be rebuilt using
the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC).
Hence, the variable 'CC' must be expanded in this shell script instead
of in the top-level Makefile.
Commit f354fc88a72a ("kbuild: install-extmod-build: add missing
quotation marks for CC variable") was not a correct fix because
CC="ccache gcc" should be unrelated when rebuilding userspace tools.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The gpriv->transceiver is retrieved in probe() through usb_get_phy() but
never released. Use devm_usb_get_phy() to handle this scenario.
This issue was identified through code investigation. No issue was found
without this change.
Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.
For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.
[ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[ 173.765837] usb usb3-port2: config error
Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.
Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591
Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
Signed-off-by: Henry Lin <henryl@nvidia.com>
Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Have additional check for max channel page during the probe
to cover if any offset overshoot happens due to wrong DT
configuration.
Fixes: 68811c928f88 ("dmaengine: tegra210-adma: Support channel page")
Cc: stable@vger.kernel.org
Signed-off-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250210135413.2504272-3-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>