tjh.dev
commits
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
If CONFIG_I2C=n:
WARNING: unmet direct dependencies detected for SND_SOC_AK4642
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && I2C [=n]
Selected by [y]:
- SH_7724_SOLUTION_ENGINE [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
WARNING: unmet direct dependencies detected for SND_SOC_DA7210
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n]
Selected by [y]:
- SH_ECOVEC [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
Fix this by replacing select by imply, instead of adding a dependency on
I2C.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240836.OvXqmANX-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Intel Clearwater Forest report PMT telemetry with GUID 0x14421519, which
can be used to obtain module c1e residency counter of type tcore clock.
Add early support for the counter by using heuristic that should work
for the Clearwater Forest platforms.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull MIPS fix from Thomas Bogendoerfer:
"Revert commit breaking sysv ipc for o32 ABI"
* tag 'mips_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
Revert "mips: fix shmctl/semctl/msgctl syscall for o32"
Quite a few places want to build a struct qstr by given string;
it would be convenient to have a primitive doing that, rather
than open-coding it via QSTR_INIT().
The closest approximation was in bcachefs, but that expands to
initializer list - {.len = strlen(string), .name = string}.
It would be more useful to have it as compound literal -
(struct qstr){.len = strlen(string), .name = string}.
Unlike initializer list it's a valid expression. What's more,
it's a valid lvalue - it's an equivalent of anonymous local
variable with such initializer, so the things like
path->dentry = d_alloc_pseudo(mnt->mnt_sb, &QSTR(name));
are valid. It can also be used as initializer, with identical
effect -
struct qstr x = (struct qstr){.name = s, .len = strlen(s)};
is equivalent to
struct qstr anon_variable = {.name = s, .len = strlen(s)};
struct qstr x = anon_variable;
// anon_variable is never used after that point
and any even remotely sane compiler will manage to collapse that
into
struct qstr x = {.name = s, .len = strlen(s)};
What compound literals can't be used for is initialization of
global variables, but those are covered by QSTR_INIT().
This commit lifts definition(s) of QSTR() into linux/dcache.h,
converts it to compound literal (all bcachefs users are fine
with that) and converts assorted open-coded instances to using
that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 654102df2ac2 ("kbuild: add generic support for built-in
boot DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_USE_BUILTIN_DTB to CONFIG_BUILTIN_DTB, and
CONFIG_BUILTIN_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
when turbostat interval mode can't migrate to a CPU, it complains,
prints no data, re-initializes with the new CPU configuration
and starts a new interval.
But this strategy in the face of a CPU hotplug offline during an interval
doesn't help in one-shot mode. When the missing CPU is discovered
at the end of the interval, the forked program has already returned
and there is nothing left for a new interval to measure.
So instead of aborting get_coutners() and delta_cpu() if a missing CPU
is detected, complain, but carry on and output what statistics are
actually present.
Use the same strategy for delta_cpu when aperf:mperf are observed
to have been reset -- complain, but carry on and print data for
the CPUs that are still present.
Interval mode error handling is unchanged.
One-shot mode can now do this:
$ sudo chcpu -e 1 ; sudo ./turbostat --quiet --show PkgWatt,Busy%,CPU chcpu -d 1
CPU 1 enabled
CPU 1 disabled
get_counters: Could not migrate to CPU 1
./turbostat: Counter reset detected
0.036920 sec
CPU Busy% PkgWatt
- 0.00 10.00
0 99.73 10.00
1 0.00
2 91.53
3 16.83
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
This reverts commit bc7584e009c39375294794f7ca751a6b2622c425.
The split IPC system calls for o32 have been introduced with modern
version only. Changing this breaks ABI.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Added for the sake of vfs_path_lookup(), which is in linux/namei.h
these days.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which has significant costs
parsing format string and is less efficient than seq_put_decimal_ull_width().
Stress reading /proc/interrupts indicates ~30% performance improvement with
this patch.
Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
In "one-shot" mode, turbostat
1. takes a counter snapshot
2. forks and waits for a child
3. takes the end counter snapshot and prints the result.
But turbostat counter snapshots currently use affinity to travel
around the system so that counter reads are "local", and this
affinity must be cleared between #1 and #2 above.
The offending commit removed that reset that allowed the child
to run on cpu_present_set.
Fix that issue, and improve upon the original by using
cpu_possible_set for the child. This allows the child
to also run on CPUs that hotplug online during its runtime.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Fixes: 7bb3fe27ad4f ("tools/power/turbostat: Obey allowed CPUs during startup")
Signed-off-by: Len Brown <len.brown@intel.com>
Pull debugfs fix from Greg KH:
"Here is a single debugfs fix from Al to resolve a reported regression
in the driver-core tree. It has been reported to fix the issue"
* tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
debugfs: Fix the missing initializations in __debugfs_file_get()
As SMB protocol distinguish between symlink to directory and symlink to
file, add some mechanism to disallow resolving incompatible types.
When SMB symlink is of the directory type, ensure that its target path ends
with slash. This forces Linux to not allow resolving such symlink to file.
And when SMB symlink is of the file type and its target path ends with
slash then returns an error as such symlink is unresolvable. Such symlink
always points to invalid location as file cannot end with slash.
As POSIX server does not distinguish between symlinks to file and symlink
directory, do not apply this change for symlinks from POSIX SMB server. For
POSIX SMB servers, this change does nothing.
This mimics Windows behavior of native SMB symlinks.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
pci-legacy systems are not using logic_pio to managed PIO
allocations, thus the generic pci_address_to_pio won't work
when PCI_IOBASE is defined.
Override the function to use architecture implementation to
fix the problem.
Cc: stable@vger.kernel.org
Fixes: 4bfb53e7d317 ("mips: add <asm-generic/io.h> including")
Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Closes: https://lore.kernel.org/r/99f75c66-4c2d-45dc-a808-b5ba440c7551@app.fastmail.com/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some PMT counters, for example module c1e residency on Intel Clearwater
Forest, are reported using tcore clock type.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
both method table pointers in debugfs_fsdata need to be initialized,
obviously, and calculating the bitmap of present methods would also
go better if we start with initialized state.
Fixes: 41a0ecc0997c ("debugfs: get rid of dynamically allocation proxy_ops")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250129191937.GR1977892@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To 2.53
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove hard-coded strings by using the str_on_off() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
Fix checkpatch whitespace issues since 2024.11.30
Summary of Changes since 2024.11.30:
Enable SysWatt by default.
Add initial PTL, CWF platform support.
Refuse to run on unsupported platforms without --force
to avoid not-so-useful measurements mistakenly made
using obsolete versions.
Harden initial PMT code in response to early use.
Signed-off-by: Len Brown <len.brown@intel.com>
Pull media fix from Mauro Carvalho Chehab:
"A revert for a regression in the uvcvideo driver"
* tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
Revert "media: uvcvideo: Require entities to have a non-zero unique ID"
MM developers have an interest in the xarray code.
Cc: David Gow <davidgow@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull soundwire updates from Vinod Koul:
- SoundWire multi lane support to use multiple lanes if supported
- Stream handling of DEPREPARED state
- AMD wake register programming for power off mode
* tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: clear wake enable register for power off mode
soundwire: generic_bandwidth_allocation: count the bandwidth of active streams only
SoundWire: pass stream to compute_params()
soundwire: generic_bandwidth_allocation: add lane in sdw_group_params
soundwire: generic_bandwidth_allocation: select data lane
soundwire: generic_bandwidth_allocation: check required freq accurately
soundwire: generic_bandwidth_allocation: correct clk_freq check in sdw_select_row_col
Soundwire: generic_bandwidth_allocation: set frame shape on fly
Soundwire: stream: program BUSCLOCK_SCALE
Soundwire: add sdw_slave_get_scale_index helper
soundwire: generic_bandwidth_allocation: skip DEPREPARED streams
soundwire: stream: set DEPREPARED state earlier
soundwire: add lane_used_bandwidth in struct sdw_bus
soundwire: mipi_disco: read lane mapping properties from ACPI
soundwire: add lane field in sdw_port_runtime
soundwire: bus: Move irq mapping cleanup into devres
This change implements support for creating new symlink in WSL-style by
Linux cifs client when -o reparse=wsl mount option is specified. WSL-style
symlink uses reparse point with tag IO_REPARSE_TAG_LX_SYMLINK and symlink
target location is stored in reparse buffer in UTF-8 encoding prefixed by
32-bit flags. Flags bits are unknown, but it was observed that WSL always
sets flags to value 0x02000000. Do same in Linux cifs client.
New symlinks would be created in WSL-style only in case the mount option
-o reparse=wsl is specified, which is not by default. So default CIFS
mounts are not affected by this change.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB and BUILTIN_DTB_ALL when the built-in DTB
support is enabled.
DTBs compiled under arch/mips/boot/dts/ will be wrapped by the generic
rule in scripts/Makefile.vmlinux.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
Commit 157ce8f381ef ("i2c: Introduce OF component probe function") adds the
header file include/linux/i2c-of-prober.h and a corresponding file entry in
the newly added MAINTAINERS section I2C OF COMPONENT PROBER. This file
entry unfortunately has a typo.
Fortunately, ./scripts/get_maintainer.pl --self-test=patterns detects this
broken reference.
Fix the typo in this file entry in the I2C OF COMPONENT PROBER section.
Fixes: 157ce8f381ef ("i2c: Introduce OF component probe function")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Allow user to add PMT counters by either identifying the source with:
guid=%u,seq=%u
or, since this patch, with direct sysfs path:
path=%s, for example path=/sys/class/intel_pmt/telem5
In the later case, the guid and sequence number will be infered
by turbostat.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull hexagon updates from Brian Cain:
- Move kernel prototypes out of uapi header to internal header
- Fix to address an unbalanced spinlock
- Miscellaneous patches to fix static checks
- Update bcain@quicinc.com->brian.cain@oss.qualcomm.com
* tag 'for-linus-hexagon-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux:
MAINTAINERS: Update my email address
hexagon: Fix unbalanced spinlock in die()
hexagon: Fix warning comparing pointer to 0
hexagon: Move kernel prototypes out of uapi/asm/setup.h header
hexagon: time: Remove redundant null check for resource
hexagon: fix using plain integer as NULL pointer warning in cmpxchg
This reverts commit 3dd075fe8ebbc6fcbf998f81a75b8c4b159a6195.
Tomasz has reported that his device, Generalplus Technology Inc. 808 Camera,
with ID 1b3f:2002, stopped being detected:
$ ls -l /dev/video*
zsh: no matches found: /dev/video*
[ 7.230599] usb 3-2: Found multiple Units with ID 5
This particular device is non-compliant, having both the Output Terminal
and Processing Unit with ID 5. uvc_scan_fallback, though, is able to build
a chain. However, when media elements are added and uvc_mc_create_links
call uvc_entity_by_id, it will get the incorrect entity,
media_create_pad_link will WARN, and it will fail to register the entities.
In order to reinstate support for such devices in a timely fashion,
reverting the fix for these warnings is appropriate. A proper fix that
considers the existence of such non-compliant devices will be submitted in
a later development cycle.
Reported-by: Tomasz Sikora <sikora.tomus@gmail.com>
Fixes: 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250114200045.1401644-1-cascardo@igalia.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Revert c7bb5cf9fc4e ("xarray: port tests to kunit"). It broke the build
when compiing the xarray userspace test harness code.
Reported-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Closes: https://lkml.kernel.org/r/07cf896e-adf8-414f-a629-a808fc26014a@oracle.com
Cc: David Gow <davidgow@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tamir Duberstein <tamird@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull phy updates from Vinod Koul:
"Lots of Qualcomm and Rockchip device support.
New Support:
- Qualcomm SAR2130P qmp usb, SAR2130P qmp pcie, QCS615 qusb2 and
PCIe, IPQ5424 qmp pcie, IPQ5424 QUSB2 and USB3 PHY
- Rockchip rk3576 combo phy support
Updates:
- Drop Shengyang for JH7110 maintainer
- Freescale hdmi register calculation optimization
- Rockchip pcie phy mutex and regmap updates"
* tag 'phy-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (37 commits)
dt-bindings: phy: qcom,qmp-pcie: document the SM8350 two lanes PCIe PHY
phy: rockchip: phy-rockchip-typec: Fix Copyright description
dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ5424 QMP PCIe PHYs
phy: qcom-qusb2: Add support for QCS615
dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings
phy: core: Simplify API of_phy_simple_xlate() implementation
phy: sun4i-usb: Remove unused of_gpio.h
phy: HiSilicon: Don't use "proxy" headers
phy: samsung-ufs: switch back to syscon_regmap_lookup_by_phandle()
phy: qualcomm: qmp-pcie: add support for SAR2130P
phy: qualcomm: qmp-pcie: define several new registers
phy: qualcomm: qmp-pcie: split PCS_LANE1 region
phy: qualcomm: qmp-combo: add support for SAR2130P
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SAR2130P compatible
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add SAR2130P compatible
phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation
phy: freescale: fsl-samsung-hdmi: Stop searching when exact match is found
phy: freescale: fsl-samsung-hdmi: Expand Integer divider range
phy: rockchip-naneng-combo: add rk3576 support
dt-bindings: phy: rockchip: add rk3576 compatible
...
As per design for power off mode, clear the wake enable register during
resume sequence.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20241203092144.4096986-1-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are now more servers which advertise support for IAKerb (passthrough
Kerberos authentication via proxy). IAKerb is a public extension industry
standard Kerberos protocol that allows a client without line-of-sight
to a Domain Controller to authenticate. There can be cases where we
would fail to mount if the server only advertises the OID for IAKerb
in SPNEGO/GSSAPI. Add code to allow us to still upcall to userspace
in these cases to obtain the Kerberos ticket.
Signed-off-by: Steve French <stfrench@microsoft.com>
The commit 275f22148e87 ("ipc: rename old-style shmctl/semctl/msgctl
syscalls") switched various architectures to use sys_old_*ctl() with
ipc_parse_version, including mips n32/n64. However, for mips o32, commit
0d6040d46817 ("arch: add split IPC system calls where needed") added
separate IPC syscalls without properly using the old-style handlers.
This causes applications using uClibc-ng to fail with -EINVAL when
calling semctl/shmctl/msgctl with IPC_64 flag, as uClibc-ng uses the
syscall numbers from kernel headers to determine whether to use the IPC
multiplexer or split syscalls. In contrast, glibc is unaffected as it
uses a unified feature test macro __ASSUME_DIRECT_SYSVIPC_SYSCALLS
(disabled for mips-o32) to make this decision.
Fix this by switching the o32 ABI entries for semctl, shmctl and msgctl
to use the old-style handlers, matching the behavior of other
architectures and fixing compatibility with uClibc-ng.
Signed-off-by: Ism Hong <ism.hong@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa753
("vsprintf: add binary printf") but as far as I can see was never used,
unlike the other two functions in that patch.
Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When of_get_next_child_with_prefix() was added, the prefix argument was
left undocumented. This caused a new warning to be generated during the
kerneldoc build process:
drivers/of/base.c:661: warning: Function parameter or struct member 'prefix'
not described in 'of_get_next_child_with_prefix'
Properly document the argument to fix this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411280010.KGSDBOUE-lkp@intel.com/
Fixes: 1fcc67e3a354 ("of: base: Add for_each_child_of_node_with_prefix()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Some platforms may expose multiple telemetry files identified with the
same GUID. Interpreting it correctly, to associate given counter with a
CPU, core or a package requires more metadata from the user.
Parse and create ordered, linked list of those PMT aggregators, so that
we can identify specific aggregator with GUID + sequence number.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This bogus stale file was added in commit 101971298be2 ("riscv: add a
warning when physical memory address overflows"). It's the old location
for what is now 'security/selinux/genheaders'.
It looks like it got incorrectly committed back when that file was in
the old location, and then rebasing kept the bogus file alive.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/linux-riscv/20250201020003.GA77370@sol.localdomain/
Fixes: 101971298be2 ("riscv: add a warning when physical memory address overflows")
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qualcomm is migrating away from quicinc.com email addresses towards ones
with *.qualcomm.com.
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
When function of_find_device_by_node() fails, it returns NULL instead of
an error code. So the corresponding error check logic should be modified
to check whether the return value is NULL and set the error code to be
returned as -ENODEV.
Fixes: 46c15a4ff1f4 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241015014053.669-1-thunder.leizhen@huawei.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ensure test-only changes are sent to the relevant maintainer.
Link: https://lkml.kernel.org/r/20250129-xarray-test-maintainer-v1-1-482e31f30f47@gmail.com
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Cc: Mattew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull dmaengine updates from Vinod Koul:
"A bunch of new device support and updates to few drivers, biggest of
them amd ones.
New support:
- TI J722S CSI BCDMA controller support
- Intel idxd Panther Lake family platforms
- Allwinner F1C100s suniv DMA
- Qualcomm QCS615, QCS8300, SM8750, SA8775P GPI dma controller support
- AMD ae4dma controller support and reorganisation of amd driver
Updates:
- Channel page support for Nvidia Tegra210 adma driver
- Freescale support for S32G based platforms
- Yamilfy atmel dma bindings"
* tag 'dmaengine-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (45 commits)
dmaengine: idxd: Enable Function Level Reset (FLR) for halt
dmaengine: idxd: Refactor halt handler
dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers
dmaengine: idxd: Binding and unbinding IDXD device and driver
dmaengine: idxd: Add idxd_pci_probe_alloc() helper
dt-bindings: dma: atmel: Convert to json schema
dt-bindings: dma: st-stm32-dmamux: Add description for dma-cell values
dmaengine: qcom: gpi: Add GPI immediate DMA support for SPI protocol
dt-bindings: dma: adi,axi-dmac: deprecate adi,channels node
dt-bindings: dma: adi,axi-dmac: convert to yaml schema
dmaengine: mv_xor: switch to for_each_child_of_node_scoped()
dmaengine: bcm2835-dma: Prevent suspend if DMA channel is busy
dmaengine: tegra210-adma: Support channel page
dt-bindings: dma: Support channel page to nvidia,tegra210-adma
dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA
dt-bindings: dma: ti: k3-bcdma: Add J722S CSI BCDMA
dmaengine: ti: edma: fix OF node reference leaks in edma_driver
dmaengine: ti: edma: make the loop condition simpler in edma_probe()
dmaengine: fsl-edma: read/write multiple registers in cyclic transactions
dmaengine: fsl-edma: add support for S32G based platforms
...
Document the two lanes PCIe PHY found on SM8350 SoCs along the
already documented single lane PCIe PHY.
This fixes:
/soc@0/phy@1c0e000: failed to match any schema with compatible: ['qcom,sm8350-qmp-gen3x2-pcie-phy']
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-topic-misc-sm8350-pcie-bindings-fix-v1-1-e8eaff1699d7@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
sdw_compute_group_params() should only count payload bandwidth of the
active streams which is in the ENABLED and DISABLED state in the bus.
And add the payload bandwidth of the stream that calls
sdw_compute_group_params() in sdw_prepare_stream().
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20241218080155.102405-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
struct FILE_ALL_INFO for level 263 (0x107) used by QPathInfo does not have
any IndexNumber, AccessFlags, IndexNumber1, CurrentByteOffset, Mode or
AlignmentRequirement members. So remove all of them.
Also adjust code in move_cifs_info_to_smb2() function which converts struct
FILE_ALL_INFO to struct smb2_file_all_info.
Fixed content of struct FILE_ALL_INFO was verified that is correct against:
* [MS-CIFS] section 2.2.8.3.10 SMB_QUERY_FILE_ALL_INFO
* Samba server implementation of trans2 query file/path for level 263
* Packet structure tests against Windows SMB servers
This change fixes CIFSSMBQFileInfo() and CIFSSMBQPathInfo() functions which
directly copy received FILE_ALL_INFO network buffers into kernel structures
of FILE_ALL_INFO type.
struct FILE_ALL_INFO is the response structure returned by the SMB server.
So the incorrect definition of this structure can lead to returning bogus
information in stat() call.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, installation of Debian 12.8 for mipsel fails on machines
without an FPU [1]. This is caused by the fact that zstd (which is used
for initramfs compression) executes the prefx instruction, which is not
emulated properly by the kernel.
The prefx (Prefetch Indexed) instruction fetches data from memory into
the cache without any side effects. Though functionally unrelated, it
requires an FPU [2].
Bytecode format of this instruction ends on "001111" binary:
(prefx instruction format) & 0x0000003f = 0x0000000f
The code in fpux_emu() runs like so:
#define MIPSInst(x) x
#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000007)
#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f)
enum cop1x_func { ..., pfetch_op = 0x0f, ... };
...
switch (MIPSInst_FMA_FFMT(ir)) {
...
case 0x3:
if (MIPSInst_FUNC(ir) != pfetch_op)
return SIGILL;
/* ignore prefx operation */
break;
default:
return SIGILL;
}
That snippet above contains a logic error and the
if (MIPSInst_FUNC(ir) != pfetch_op)
comparison always fires.
When MIPSInst_FUNC(ir) is equal to pfetch_op, ir must end on 001111
binary. In this case, MIPSInst_FMA_FFMT(ir) must be equal to 0x7, which
does not match that case label.
This causes emulation failure for the prefx instruction. Fix it.
This has been broken by
commit 919af8b96c89 ("MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manual")
which modified the MIPSInst_FMA_FFMT macro without updating the users.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: stable@vger.kernel.org # after 3 weeks
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Fixes: 919af8b96c89 ("MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manual")
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1091858
[2] MIPS Architecture For Programmers Volume II-A: The MIPS32 Instruction Set
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
A sigqueue belonging to a posix timer, which target is not a specific
thread but a whole thread group, is preferrably targeted to the current
task if it is part of that thread group.
However nothing prevents a posix timer event from queueing such a
sigqueue from a reaped yet running task. The interruptible code space
between exit_notify() and the final call to schedule() is enough for
posix_timer_fn() hrtimer to fire.
If that happens while the current task is part of the thread group
target, it is proposed to handle it but since its sighand pointer may
have been cleared already, the sigqueue is dropped even if there are
other tasks running within the group that could handle it.
As a result posix timers with thread group wide target may miss signals
when some of their threads are exiting.
Fix this with verifying that the current task hasn't been through
exit_notify() before proposing it as a preferred target so as to ensure
that its sighand is still here and stable.
complete_signal() might still reconsider the choice and find a better
target within the group if current has passed retarget_shared_pending()
already.
Fixes: bcb7ee79029d ("posix-timers: Prefer delivery of signals to the current thread")
Reported-by: Anthony Mallet <anthony.mallet@laas.fr>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241122234811.60455-1-frederic@kernel.org
Closes: https://lore.kernel.org/all/26411.57288.238690.681680@gargle.gargle.HOWL
Pull more tracing updates from Steven Rostedt:
- Add trace flag for NEED_RESCHED_LAZY
Now that NEED_RESCHED_LAZY is upstream, add it to the status bits of
the common_flags. This will now show when the NEED_RESCHED_LAZY flag
is set that is used for debugging latency issues in the kernel via a
trace.
- Remove leftover "__idx" variable when SRCU was removed from the
tracepoint code
- Add rcu_tasks_trace guard
To add a guard() around the tracepoint code, a rcu_tasks_trace guard
needs to be created first.
- Remove __DO_TRACE() macro and just call __DO_TRACE_CALL() directly
The DO_TRACE() macro has conditional locking depending on what was
passed into the macro parameters. As the guts of the macro has been
moved to __DO_TRACE_CALL() to handle static call logic, there's no
reason to keep the __DO_TRACE() macro around.
It is better to just do the locking in place without the conditionals
and call __DO_TRACE_CALL() from those locations. The "cond" passed in
can also be moved out of that macro. This simplifies the code.
- Remove the "cond" from the system call tracepoint macros
The "cond" variable was added to allow some tracepoints to check a
condition within the static_branch (jump/nop) logic. The system calls
do not need this. Removing it simplifies the code.
- Replace scoped_guard() with just guard() in the tracepoint logic
guard() works just as well as scoped_guard() in the tracepoint logic
and the scoped_guard() causes some issues.
* tag 'trace-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use guard() rather than scoped_guard()
tracing: Remove cond argument from __DECLARE_TRACE_SYSCALL
tracing: Remove conditional locking from __DO_TRACE()
rcupdate_trace: Define rcu_tasks_trace lock guard
tracing: Remove __idx variable from __DO_TRACE
tracing: Move it_func[0] comment to the relevant context
tracing: Record task flag NEED_RESCHED_LAZY.
This patch fixes a coding style issue in the alignment of parameters
in the function i2c_smbus_write_bytes(). It replaces spaces with tabs for
alignment, as per the coding style guidelines.
Signed-off-by: Liam Zuiderhoek <zuiderhoekl@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
PMT directories exposed in sysfs use the following pattern:
telem%u
for example:
telem0, telem2, telem3, ..., telem15, telem16
This naming scheme preserves the ordering from the PCIe discovery, which
is important to correctly map the telemetry directory to the specific
domain (cpu, core, package etc).
Because readdir() traverses the entries in alphabetical order, causing
for example "telem13" to be traversed before "telem3", it is necessary
to use scandir() with custom compare() callback to preserve the PCIe
ordering.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
If CONFIG_I2C=n:
WARNING: unmet direct dependencies detected for SND_SOC_AK4642
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && I2C [=n]
Selected by [y]:
- SH_7724_SOLUTION_ENGINE [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
WARNING: unmet direct dependencies detected for SND_SOC_DA7210
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n]
Selected by [y]:
- SH_ECOVEC [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
Fix this by replacing select by imply, instead of adding a dependency on
I2C.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240836.OvXqmANX-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Intel Clearwater Forest report PMT telemetry with GUID 0x14421519, which
can be used to obtain module c1e residency counter of type tcore clock.
Add early support for the counter by using heuristic that should work
for the Clearwater Forest platforms.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Quite a few places want to build a struct qstr by given string;
it would be convenient to have a primitive doing that, rather
than open-coding it via QSTR_INIT().
The closest approximation was in bcachefs, but that expands to
initializer list - {.len = strlen(string), .name = string}.
It would be more useful to have it as compound literal -
(struct qstr){.len = strlen(string), .name = string}.
Unlike initializer list it's a valid expression. What's more,
it's a valid lvalue - it's an equivalent of anonymous local
variable with such initializer, so the things like
path->dentry = d_alloc_pseudo(mnt->mnt_sb, &QSTR(name));
are valid. It can also be used as initializer, with identical
effect -
struct qstr x = (struct qstr){.name = s, .len = strlen(s)};
is equivalent to
struct qstr anon_variable = {.name = s, .len = strlen(s)};
struct qstr x = anon_variable;
// anon_variable is never used after that point
and any even remotely sane compiler will manage to collapse that
into
struct qstr x = {.name = s, .len = strlen(s)};
What compound literals can't be used for is initialization of
global variables, but those are covered by QSTR_INIT().
This commit lifts definition(s) of QSTR() into linux/dcache.h,
converts it to compound literal (all bcachefs users are fine
with that) and converts assorted open-coded instances to using
that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 654102df2ac2 ("kbuild: add generic support for built-in
boot DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_USE_BUILTIN_DTB to CONFIG_BUILTIN_DTB, and
CONFIG_BUILTIN_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
when turbostat interval mode can't migrate to a CPU, it complains,
prints no data, re-initializes with the new CPU configuration
and starts a new interval.
But this strategy in the face of a CPU hotplug offline during an interval
doesn't help in one-shot mode. When the missing CPU is discovered
at the end of the interval, the forked program has already returned
and there is nothing left for a new interval to measure.
So instead of aborting get_coutners() and delta_cpu() if a missing CPU
is detected, complain, but carry on and output what statistics are
actually present.
Use the same strategy for delta_cpu when aperf:mperf are observed
to have been reset -- complain, but carry on and print data for
the CPUs that are still present.
Interval mode error handling is unchanged.
One-shot mode can now do this:
$ sudo chcpu -e 1 ; sudo ./turbostat --quiet --show PkgWatt,Busy%,CPU chcpu -d 1
CPU 1 enabled
CPU 1 disabled
get_counters: Could not migrate to CPU 1
./turbostat: Counter reset detected
0.036920 sec
CPU Busy% PkgWatt
- 0.00 10.00
0 99.73 10.00
1 0.00
2 91.53
3 16.83
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which has significant costs
parsing format string and is less efficient than seq_put_decimal_ull_width().
Stress reading /proc/interrupts indicates ~30% performance improvement with
this patch.
Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
In "one-shot" mode, turbostat
1. takes a counter snapshot
2. forks and waits for a child
3. takes the end counter snapshot and prints the result.
But turbostat counter snapshots currently use affinity to travel
around the system so that counter reads are "local", and this
affinity must be cleared between #1 and #2 above.
The offending commit removed that reset that allowed the child
to run on cpu_present_set.
Fix that issue, and improve upon the original by using
cpu_possible_set for the child. This allows the child
to also run on CPUs that hotplug online during its runtime.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Fixes: 7bb3fe27ad4f ("tools/power/turbostat: Obey allowed CPUs during startup")
Signed-off-by: Len Brown <len.brown@intel.com>
Pull debugfs fix from Greg KH:
"Here is a single debugfs fix from Al to resolve a reported regression
in the driver-core tree. It has been reported to fix the issue"
* tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
debugfs: Fix the missing initializations in __debugfs_file_get()
As SMB protocol distinguish between symlink to directory and symlink to
file, add some mechanism to disallow resolving incompatible types.
When SMB symlink is of the directory type, ensure that its target path ends
with slash. This forces Linux to not allow resolving such symlink to file.
And when SMB symlink is of the file type and its target path ends with
slash then returns an error as such symlink is unresolvable. Such symlink
always points to invalid location as file cannot end with slash.
As POSIX server does not distinguish between symlinks to file and symlink
directory, do not apply this change for symlinks from POSIX SMB server. For
POSIX SMB servers, this change does nothing.
This mimics Windows behavior of native SMB symlinks.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
pci-legacy systems are not using logic_pio to managed PIO
allocations, thus the generic pci_address_to_pio won't work
when PCI_IOBASE is defined.
Override the function to use architecture implementation to
fix the problem.
Cc: stable@vger.kernel.org
Fixes: 4bfb53e7d317 ("mips: add <asm-generic/io.h> including")
Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Closes: https://lore.kernel.org/r/99f75c66-4c2d-45dc-a808-b5ba440c7551@app.fastmail.com/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
both method table pointers in debugfs_fsdata need to be initialized,
obviously, and calculating the bitmap of present methods would also
go better if we start with initialized state.
Fixes: 41a0ecc0997c ("debugfs: get rid of dynamically allocation proxy_ops")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250129191937.GR1977892@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
Fix checkpatch whitespace issues since 2024.11.30
Summary of Changes since 2024.11.30:
Enable SysWatt by default.
Add initial PTL, CWF platform support.
Refuse to run on unsupported platforms without --force
to avoid not-so-useful measurements mistakenly made
using obsolete versions.
Harden initial PMT code in response to early use.
Signed-off-by: Len Brown <len.brown@intel.com>
MM developers have an interest in the xarray code.
Cc: David Gow <davidgow@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull soundwire updates from Vinod Koul:
- SoundWire multi lane support to use multiple lanes if supported
- Stream handling of DEPREPARED state
- AMD wake register programming for power off mode
* tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: clear wake enable register for power off mode
soundwire: generic_bandwidth_allocation: count the bandwidth of active streams only
SoundWire: pass stream to compute_params()
soundwire: generic_bandwidth_allocation: add lane in sdw_group_params
soundwire: generic_bandwidth_allocation: select data lane
soundwire: generic_bandwidth_allocation: check required freq accurately
soundwire: generic_bandwidth_allocation: correct clk_freq check in sdw_select_row_col
Soundwire: generic_bandwidth_allocation: set frame shape on fly
Soundwire: stream: program BUSCLOCK_SCALE
Soundwire: add sdw_slave_get_scale_index helper
soundwire: generic_bandwidth_allocation: skip DEPREPARED streams
soundwire: stream: set DEPREPARED state earlier
soundwire: add lane_used_bandwidth in struct sdw_bus
soundwire: mipi_disco: read lane mapping properties from ACPI
soundwire: add lane field in sdw_port_runtime
soundwire: bus: Move irq mapping cleanup into devres
This change implements support for creating new symlink in WSL-style by
Linux cifs client when -o reparse=wsl mount option is specified. WSL-style
symlink uses reparse point with tag IO_REPARSE_TAG_LX_SYMLINK and symlink
target location is stored in reparse buffer in UTF-8 encoding prefixed by
32-bit flags. Flags bits are unknown, but it was observed that WSL always
sets flags to value 0x02000000. Do same in Linux cifs client.
New symlinks would be created in WSL-style only in case the mount option
-o reparse=wsl is specified, which is not by default. So default CIFS
mounts are not affected by this change.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB and BUILTIN_DTB_ALL when the built-in DTB
support is enabled.
DTBs compiled under arch/mips/boot/dts/ will be wrapped by the generic
rule in scripts/Makefile.vmlinux.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
Commit 157ce8f381ef ("i2c: Introduce OF component probe function") adds the
header file include/linux/i2c-of-prober.h and a corresponding file entry in
the newly added MAINTAINERS section I2C OF COMPONENT PROBER. This file
entry unfortunately has a typo.
Fortunately, ./scripts/get_maintainer.pl --self-test=patterns detects this
broken reference.
Fix the typo in this file entry in the I2C OF COMPONENT PROBER section.
Fixes: 157ce8f381ef ("i2c: Introduce OF component probe function")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Allow user to add PMT counters by either identifying the source with:
guid=%u,seq=%u
or, since this patch, with direct sysfs path:
path=%s, for example path=/sys/class/intel_pmt/telem5
In the later case, the guid and sequence number will be infered
by turbostat.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull hexagon updates from Brian Cain:
- Move kernel prototypes out of uapi header to internal header
- Fix to address an unbalanced spinlock
- Miscellaneous patches to fix static checks
- Update bcain@quicinc.com->brian.cain@oss.qualcomm.com
* tag 'for-linus-hexagon-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux:
MAINTAINERS: Update my email address
hexagon: Fix unbalanced spinlock in die()
hexagon: Fix warning comparing pointer to 0
hexagon: Move kernel prototypes out of uapi/asm/setup.h header
hexagon: time: Remove redundant null check for resource
hexagon: fix using plain integer as NULL pointer warning in cmpxchg
This reverts commit 3dd075fe8ebbc6fcbf998f81a75b8c4b159a6195.
Tomasz has reported that his device, Generalplus Technology Inc. 808 Camera,
with ID 1b3f:2002, stopped being detected:
$ ls -l /dev/video*
zsh: no matches found: /dev/video*
[ 7.230599] usb 3-2: Found multiple Units with ID 5
This particular device is non-compliant, having both the Output Terminal
and Processing Unit with ID 5. uvc_scan_fallback, though, is able to build
a chain. However, when media elements are added and uvc_mc_create_links
call uvc_entity_by_id, it will get the incorrect entity,
media_create_pad_link will WARN, and it will fail to register the entities.
In order to reinstate support for such devices in a timely fashion,
reverting the fix for these warnings is appropriate. A proper fix that
considers the existence of such non-compliant devices will be submitted in
a later development cycle.
Reported-by: Tomasz Sikora <sikora.tomus@gmail.com>
Fixes: 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250114200045.1401644-1-cascardo@igalia.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Revert c7bb5cf9fc4e ("xarray: port tests to kunit"). It broke the build
when compiing the xarray userspace test harness code.
Reported-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Closes: https://lkml.kernel.org/r/07cf896e-adf8-414f-a629-a808fc26014a@oracle.com
Cc: David Gow <davidgow@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tamir Duberstein <tamird@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull phy updates from Vinod Koul:
"Lots of Qualcomm and Rockchip device support.
New Support:
- Qualcomm SAR2130P qmp usb, SAR2130P qmp pcie, QCS615 qusb2 and
PCIe, IPQ5424 qmp pcie, IPQ5424 QUSB2 and USB3 PHY
- Rockchip rk3576 combo phy support
Updates:
- Drop Shengyang for JH7110 maintainer
- Freescale hdmi register calculation optimization
- Rockchip pcie phy mutex and regmap updates"
* tag 'phy-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (37 commits)
dt-bindings: phy: qcom,qmp-pcie: document the SM8350 two lanes PCIe PHY
phy: rockchip: phy-rockchip-typec: Fix Copyright description
dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ5424 QMP PCIe PHYs
phy: qcom-qusb2: Add support for QCS615
dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings
phy: core: Simplify API of_phy_simple_xlate() implementation
phy: sun4i-usb: Remove unused of_gpio.h
phy: HiSilicon: Don't use "proxy" headers
phy: samsung-ufs: switch back to syscon_regmap_lookup_by_phandle()
phy: qualcomm: qmp-pcie: add support for SAR2130P
phy: qualcomm: qmp-pcie: define several new registers
phy: qualcomm: qmp-pcie: split PCS_LANE1 region
phy: qualcomm: qmp-combo: add support for SAR2130P
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SAR2130P compatible
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add SAR2130P compatible
phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation
phy: freescale: fsl-samsung-hdmi: Stop searching when exact match is found
phy: freescale: fsl-samsung-hdmi: Expand Integer divider range
phy: rockchip-naneng-combo: add rk3576 support
dt-bindings: phy: rockchip: add rk3576 compatible
...
There are now more servers which advertise support for IAKerb (passthrough
Kerberos authentication via proxy). IAKerb is a public extension industry
standard Kerberos protocol that allows a client without line-of-sight
to a Domain Controller to authenticate. There can be cases where we
would fail to mount if the server only advertises the OID for IAKerb
in SPNEGO/GSSAPI. Add code to allow us to still upcall to userspace
in these cases to obtain the Kerberos ticket.
Signed-off-by: Steve French <stfrench@microsoft.com>
The commit 275f22148e87 ("ipc: rename old-style shmctl/semctl/msgctl
syscalls") switched various architectures to use sys_old_*ctl() with
ipc_parse_version, including mips n32/n64. However, for mips o32, commit
0d6040d46817 ("arch: add split IPC system calls where needed") added
separate IPC syscalls without properly using the old-style handlers.
This causes applications using uClibc-ng to fail with -EINVAL when
calling semctl/shmctl/msgctl with IPC_64 flag, as uClibc-ng uses the
syscall numbers from kernel headers to determine whether to use the IPC
multiplexer or split syscalls. In contrast, glibc is unaffected as it
uses a unified feature test macro __ASSUME_DIRECT_SYSVIPC_SYSCALLS
(disabled for mips-o32) to make this decision.
Fix this by switching the o32 ABI entries for semctl, shmctl and msgctl
to use the old-style handlers, matching the behavior of other
architectures and fixing compatibility with uClibc-ng.
Signed-off-by: Ism Hong <ism.hong@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa753
("vsprintf: add binary printf") but as far as I can see was never used,
unlike the other two functions in that patch.
Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When of_get_next_child_with_prefix() was added, the prefix argument was
left undocumented. This caused a new warning to be generated during the
kerneldoc build process:
drivers/of/base.c:661: warning: Function parameter or struct member 'prefix'
not described in 'of_get_next_child_with_prefix'
Properly document the argument to fix this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411280010.KGSDBOUE-lkp@intel.com/
Fixes: 1fcc67e3a354 ("of: base: Add for_each_child_of_node_with_prefix()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Some platforms may expose multiple telemetry files identified with the
same GUID. Interpreting it correctly, to associate given counter with a
CPU, core or a package requires more metadata from the user.
Parse and create ordered, linked list of those PMT aggregators, so that
we can identify specific aggregator with GUID + sequence number.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This bogus stale file was added in commit 101971298be2 ("riscv: add a
warning when physical memory address overflows"). It's the old location
for what is now 'security/selinux/genheaders'.
It looks like it got incorrectly committed back when that file was in
the old location, and then rebasing kept the bogus file alive.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/linux-riscv/20250201020003.GA77370@sol.localdomain/
Fixes: 101971298be2 ("riscv: add a warning when physical memory address overflows")
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When function of_find_device_by_node() fails, it returns NULL instead of
an error code. So the corresponding error check logic should be modified
to check whether the return value is NULL and set the error code to be
returned as -ENODEV.
Fixes: 46c15a4ff1f4 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241015014053.669-1-thunder.leizhen@huawei.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull dmaengine updates from Vinod Koul:
"A bunch of new device support and updates to few drivers, biggest of
them amd ones.
New support:
- TI J722S CSI BCDMA controller support
- Intel idxd Panther Lake family platforms
- Allwinner F1C100s suniv DMA
- Qualcomm QCS615, QCS8300, SM8750, SA8775P GPI dma controller support
- AMD ae4dma controller support and reorganisation of amd driver
Updates:
- Channel page support for Nvidia Tegra210 adma driver
- Freescale support for S32G based platforms
- Yamilfy atmel dma bindings"
* tag 'dmaengine-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (45 commits)
dmaengine: idxd: Enable Function Level Reset (FLR) for halt
dmaengine: idxd: Refactor halt handler
dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers
dmaengine: idxd: Binding and unbinding IDXD device and driver
dmaengine: idxd: Add idxd_pci_probe_alloc() helper
dt-bindings: dma: atmel: Convert to json schema
dt-bindings: dma: st-stm32-dmamux: Add description for dma-cell values
dmaengine: qcom: gpi: Add GPI immediate DMA support for SPI protocol
dt-bindings: dma: adi,axi-dmac: deprecate adi,channels node
dt-bindings: dma: adi,axi-dmac: convert to yaml schema
dmaengine: mv_xor: switch to for_each_child_of_node_scoped()
dmaengine: bcm2835-dma: Prevent suspend if DMA channel is busy
dmaengine: tegra210-adma: Support channel page
dt-bindings: dma: Support channel page to nvidia,tegra210-adma
dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA
dt-bindings: dma: ti: k3-bcdma: Add J722S CSI BCDMA
dmaengine: ti: edma: fix OF node reference leaks in edma_driver
dmaengine: ti: edma: make the loop condition simpler in edma_probe()
dmaengine: fsl-edma: read/write multiple registers in cyclic transactions
dmaengine: fsl-edma: add support for S32G based platforms
...
Document the two lanes PCIe PHY found on SM8350 SoCs along the
already documented single lane PCIe PHY.
This fixes:
/soc@0/phy@1c0e000: failed to match any schema with compatible: ['qcom,sm8350-qmp-gen3x2-pcie-phy']
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-topic-misc-sm8350-pcie-bindings-fix-v1-1-e8eaff1699d7@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
sdw_compute_group_params() should only count payload bandwidth of the
active streams which is in the ENABLED and DISABLED state in the bus.
And add the payload bandwidth of the stream that calls
sdw_compute_group_params() in sdw_prepare_stream().
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20241218080155.102405-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
struct FILE_ALL_INFO for level 263 (0x107) used by QPathInfo does not have
any IndexNumber, AccessFlags, IndexNumber1, CurrentByteOffset, Mode or
AlignmentRequirement members. So remove all of them.
Also adjust code in move_cifs_info_to_smb2() function which converts struct
FILE_ALL_INFO to struct smb2_file_all_info.
Fixed content of struct FILE_ALL_INFO was verified that is correct against:
* [MS-CIFS] section 2.2.8.3.10 SMB_QUERY_FILE_ALL_INFO
* Samba server implementation of trans2 query file/path for level 263
* Packet structure tests against Windows SMB servers
This change fixes CIFSSMBQFileInfo() and CIFSSMBQPathInfo() functions which
directly copy received FILE_ALL_INFO network buffers into kernel structures
of FILE_ALL_INFO type.
struct FILE_ALL_INFO is the response structure returned by the SMB server.
So the incorrect definition of this structure can lead to returning bogus
information in stat() call.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, installation of Debian 12.8 for mipsel fails on machines
without an FPU [1]. This is caused by the fact that zstd (which is used
for initramfs compression) executes the prefx instruction, which is not
emulated properly by the kernel.
The prefx (Prefetch Indexed) instruction fetches data from memory into
the cache without any side effects. Though functionally unrelated, it
requires an FPU [2].
Bytecode format of this instruction ends on "001111" binary:
(prefx instruction format) & 0x0000003f = 0x0000000f
The code in fpux_emu() runs like so:
#define MIPSInst(x) x
#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000007)
#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f)
enum cop1x_func { ..., pfetch_op = 0x0f, ... };
...
switch (MIPSInst_FMA_FFMT(ir)) {
...
case 0x3:
if (MIPSInst_FUNC(ir) != pfetch_op)
return SIGILL;
/* ignore prefx operation */
break;
default:
return SIGILL;
}
That snippet above contains a logic error and the
if (MIPSInst_FUNC(ir) != pfetch_op)
comparison always fires.
When MIPSInst_FUNC(ir) is equal to pfetch_op, ir must end on 001111
binary. In this case, MIPSInst_FMA_FFMT(ir) must be equal to 0x7, which
does not match that case label.
This causes emulation failure for the prefx instruction. Fix it.
This has been broken by
commit 919af8b96c89 ("MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manual")
which modified the MIPSInst_FMA_FFMT macro without updating the users.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: stable@vger.kernel.org # after 3 weeks
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Fixes: 919af8b96c89 ("MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manual")
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1091858
[2] MIPS Architecture For Programmers Volume II-A: The MIPS32 Instruction Set
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
A sigqueue belonging to a posix timer, which target is not a specific
thread but a whole thread group, is preferrably targeted to the current
task if it is part of that thread group.
However nothing prevents a posix timer event from queueing such a
sigqueue from a reaped yet running task. The interruptible code space
between exit_notify() and the final call to schedule() is enough for
posix_timer_fn() hrtimer to fire.
If that happens while the current task is part of the thread group
target, it is proposed to handle it but since its sighand pointer may
have been cleared already, the sigqueue is dropped even if there are
other tasks running within the group that could handle it.
As a result posix timers with thread group wide target may miss signals
when some of their threads are exiting.
Fix this with verifying that the current task hasn't been through
exit_notify() before proposing it as a preferred target so as to ensure
that its sighand is still here and stable.
complete_signal() might still reconsider the choice and find a better
target within the group if current has passed retarget_shared_pending()
already.
Fixes: bcb7ee79029d ("posix-timers: Prefer delivery of signals to the current thread")
Reported-by: Anthony Mallet <anthony.mallet@laas.fr>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241122234811.60455-1-frederic@kernel.org
Closes: https://lore.kernel.org/all/26411.57288.238690.681680@gargle.gargle.HOWL
Pull more tracing updates from Steven Rostedt:
- Add trace flag for NEED_RESCHED_LAZY
Now that NEED_RESCHED_LAZY is upstream, add it to the status bits of
the common_flags. This will now show when the NEED_RESCHED_LAZY flag
is set that is used for debugging latency issues in the kernel via a
trace.
- Remove leftover "__idx" variable when SRCU was removed from the
tracepoint code
- Add rcu_tasks_trace guard
To add a guard() around the tracepoint code, a rcu_tasks_trace guard
needs to be created first.
- Remove __DO_TRACE() macro and just call __DO_TRACE_CALL() directly
The DO_TRACE() macro has conditional locking depending on what was
passed into the macro parameters. As the guts of the macro has been
moved to __DO_TRACE_CALL() to handle static call logic, there's no
reason to keep the __DO_TRACE() macro around.
It is better to just do the locking in place without the conditionals
and call __DO_TRACE_CALL() from those locations. The "cond" passed in
can also be moved out of that macro. This simplifies the code.
- Remove the "cond" from the system call tracepoint macros
The "cond" variable was added to allow some tracepoints to check a
condition within the static_branch (jump/nop) logic. The system calls
do not need this. Removing it simplifies the code.
- Replace scoped_guard() with just guard() in the tracepoint logic
guard() works just as well as scoped_guard() in the tracepoint logic
and the scoped_guard() causes some issues.
* tag 'trace-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use guard() rather than scoped_guard()
tracing: Remove cond argument from __DECLARE_TRACE_SYSCALL
tracing: Remove conditional locking from __DO_TRACE()
rcupdate_trace: Define rcu_tasks_trace lock guard
tracing: Remove __idx variable from __DO_TRACE
tracing: Move it_func[0] comment to the relevant context
tracing: Record task flag NEED_RESCHED_LAZY.
This patch fixes a coding style issue in the alignment of parameters
in the function i2c_smbus_write_bytes(). It replaces spaces with tabs for
alignment, as per the coding style guidelines.
Signed-off-by: Liam Zuiderhoek <zuiderhoekl@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
PMT directories exposed in sysfs use the following pattern:
telem%u
for example:
telem0, telem2, telem3, ..., telem15, telem16
This naming scheme preserves the ordering from the PCIe discovery, which
is important to correctly map the telemetry directory to the specific
domain (cpu, core, package etc).
Because readdir() traverses the entries in alphabetical order, causing
for example "telem13" to be traversed before "telem3", it is necessary
to use scandir() with custom compare() callback to preserve the PCIe
ordering.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>