tjh.dev
commits
Pull i2c fix from Wolfram Sang:
"Fix double free of irq in amd-mp2 driver"
* tag 'i2c-for-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: amd-mp2: drop free_irq() of devm_request_irq() allocated irq
Pull x86 perf events fix from Ingo Molnar:
"Fix an information leak regression in the AMD IBS PMU code"
* tag 'perf-urgent-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/amd/ibs: Prevent leaking sensitive data to userspace
i2c-host-fixes for v6.14-rc8
amd-mp2: fix double free of irq.
Pull keys fix from Jarkko Sakkinen:
"Fix potential use-after-free in key_put()"
* tag 'keys-next-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys: Fix UAF in key_put()
Although IBS "swfilt" can prevent leaking samples with kernel RIP to the
userspace, there are few subtle cases where a 'data' address and/or a
'branch target' address can fall under kernel address range although RIP
is from userspace. Prevent leaking kernel 'data' addresses by discarding
such samples when {exclude_kernel=1,swfilt=1}.
IBS can now be invoked by unprivileged user with the introduction of
"swfilt". However, this creates a loophole in the interface where an
unprivileged user can get physical address of the userspace virtual
addresses through IBS register raw dump (PERF_SAMPLE_RAW). Prevent this
as well.
This upstream commit fixed the most obvious leak:
65a99264f5e5 perf/x86: Check data address for IBS software filter
Follow that up with a more complete fix.
Fixes: d29e744c7167 ("perf/x86: Relax privilege filter restriction on AMD IBS")
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250321161251.1033-1-ravi.bangoria@amd.com
irq allocated with devm_request_irq() will be freed in devm_irq_release(),
using free_irq() in ->remove() will causes a dangling pointer, and a
subsequent double free. So remove the free_irq() in the error path and
remove path.
Fixes: 969864efae78 ("i2c: amd-mp2: use msix/msi if the hardware supports")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20221103121146.99836-1-yangyingliang@huawei.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Pull io_uring fix from Jens Axboe:
"Just a single fix for the commit that went into your tree yesterday,
which exposed an issue with not always clearing notifications. That
could cause them to be used more than once"
* tag 'io_uring-6.14-20250322' of git://git.kernel.dk/linux:
io_uring/net: fix sendzc double notif flush
Once a key's reference count has been reduced to 0, the garbage collector
thread may destroy it at any time and so key_put() is not allowed to touch
the key after that point. The most key_put() is normally allowed to do is
to touch key_gc_work as that's a static global variable.
However, in an effort to speed up the reclamation of quota, this is now
done in key_put() once the key's usage is reduced to 0 - but now the code
is looking at the key after the deadline, which is forbidden.
Fix this by using a flag to indicate that a key can be gc'd now rather than
looking at the key's refcount in the garbage collector.
Fixes: 9578e327b2b4 ("keys: update key quotas in key_put()")
Reported-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673b6aec.050a0220.87769.004a.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pull x86 perf events fixes from Ingo Molnar:
"Two fixes: an RAPL PMU driver error handling fix, and an AMD IBS
software filter fix"
* tag 'perf-urgent-2025-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix error handling in init_rapl_pmus()
perf/x86: Check data address for IBS software filter
Pull media fix from Mauro Carvalho Chehab:
"rtl2832 driver regression fix"
* tag 'media/v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rtl2832_sdr: assign vb2 lock before vb2_queue_init
Pull spi fix from Mark Brown:
"This is a straightforward fix for a reference count leak in the rarely
used SPI device mode functionality"
* tag 'spi-fix-v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix reference count leak in slave_show()
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 5823 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
Call Trace:
<TASK>
io_notif_flush io_uring/notif.h:40 [inline]
io_send_zc_cleanup+0x121/0x170 io_uring/net.c:1222
io_clean_op+0x58c/0x9a0 io_uring/io_uring.c:406
io_free_batch_list io_uring/io_uring.c:1429 [inline]
__io_submit_flush_completions+0xc16/0xd20 io_uring/io_uring.c:1470
io_submit_flush_completions io_uring/io_uring.h:159 [inline]
Before the blamed commit, sendzc relied on io_req_msg_cleanup() to clear
REQ_F_NEED_CLEANUP, so after the following snippet the request will
never hit the core io_uring cleanup path.
io_notif_flush();
io_req_msg_cleanup();
The easiest fix is to null the notification. io_send_zc_cleanup() can
still be called after, but it's tolerated.
Reported-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Tested-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Fixes: cc34d8330e036 ("io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e1306007458b8891c88c4f20c966a17595f766b0.1742643795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull scheduler fix from Ingo Molnar:
"Revert a scheduler performance optimization that regressed other
workloads"
* tag 'sched-urgent-2025-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "sched/core: Reduce cost of sched_move_task when config autogroup"
If init_rapl_pmu() fails while allocating memory for "rapl_pmu" objects,
we miss freeing the "rapl_pmus" object in the error path. Fix that.
Fixes: 9b99d65c0bb4 ("perf/x86/rapl: Move the pmu allocation out of CPU hotplug")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250320100617.4480-1-dhananjay.ugwekar@amd.com
Pull i2c fixes from Wolfram Sang:
- omap: fix irq ACKS to avoid irq storming and system hang
- ali1535, ali15x3, sis630: fix error path at probe exit
* tag 'i2c-for-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sis630: Fix an error handling path in sis630_probe()
i2c: ali15x3: Fix an error handling path in ali15x3_probe()
i2c: ali1535: Fix an error handling path in ali1535_probe()
i2c: omap: fix IRQ storms
Commit c780d01cf1a6 ("media: vb2: vb2_core_queue_init(): sanity check lock
and wait_prepare/finish") added a sanity check to ensure that if there are
no wait_prepare/finish callbacks set by the driver, then the vb2_queue lock
must be set, since otherwise the vb2 core cannot do correct locking.
The rtl2832_sdr.c triggered this warning: it turns out that while the
driver does set this lock, it sets it too late. So move it up to before
the vb2_queue_init() call.
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Closes: https://lore.kernel.org/linux-media/20241211042355.8479-1-user@am64/
Fixes: 8fcd2795d22a ("media: rtl2832_sdr: drop vb2_ops_wait_prepare/finish")
Cc: stable@vger.kernel.org
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Pull regulator fixes from Mark Brown:
"More fixes than I'd like at this point, some of which is due to me
cooking things in -next for a bit and resetting that cooking time as
more fixes came in.
- Christian Eggers fixed some race conditions with the dummy
regulator not being available very early in boot due to the use of
asynchronous probing, both the provider side (ensuring that it's
availalbe) and consumer side (handling things if that goes wrong)
are fixed
- Ludvig Pärsson fixed some lockdep issues with the debugfs
registration for regulators holding more locks than it really needs
causing issues later when looking at the resulting debugfs.boot
- Some device specific fixes for incorrect descriptions of the
RTQ2208 from ChiYuan Huang"
* tag 'regulator-fix-v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Fix the LDO DVS capability
regulator: rtq2208: Fix incorrect buck converter phase mapping
regulator: check that dummy regulator has been probed before using it
regulator: dummy: force synchronous probing
regulator: core: Fix deadlock in create_regulator()
Fix a reference count leak in slave_show() by properly putting the device
reference obtained from device_find_any_child().
Fixes: 6c364062bfed ("spi: core: Add support for registering SPI slave controllers")
Fixes: c21b0837983d ("spi: Use device_find_any_child() instead of custom approach")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250319032305.70340-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
io_req_msg_cleanup() relies on the fact that io_netmsg_recycle() will
always fully recycle, but that may not be the case if the msg cache
was already full. To ensure that normal cleanup always gets run,
let io_netmsg_recycle() deal with clearing the relevant cleanup flags,
as it knows exactly when that should be done.
Cc: stable@vger.kernel.org
Reported-by: David Wei <dw@davidwei.uk>
Fixes: 75191341785e ("io_uring/net: add iovec recycling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull drm fixes from Dave Airlie:
"Just the usual spread of a bunch for amdgpu, and small changes to
others.
scheduler:
- fix fence reference leak
xe:
- Fix for an error if exporting a dma-buf multiple time
amdgpu:
- Fix video caps limits on several asics
- SMU 14.x fixes
- GC 12 fixes
- eDP fixes
- DMUB fix
amdkfd:
- GC 12 trap handler fix
- GC 7/8 queue validation fix
radeon:
- VCE IB parsing fix
v3d:
- fix job error handling bugs
qaic:
- fix two integer overflows
host1x:
- fix NULL domain handling"
* tag 'drm-fixes-2025-03-21' of https://gitlab.freedesktop.org/drm/kernel: (21 commits)
drm/xe: Fix exporting xe buffers multiple times
gpu: host1x: Do not assume that a NULL domain means no DMA IOMMU
drm/amdgpu/pm: Handle SCLK offset correctly in overdrive for smu 14.0.2
drm/amd/display: Fix incorrect fw_state address in dmub_srv
drm/amd/display: Use HW lock mgr for PSR1 when only one eDP
drm/amd/display: Fix message for support_edp0_on_dp1
drm/amdkfd: Fix user queue validation on Gfx7/8
drm/amdgpu: Restore uncached behaviour on GFX12
drm/amdgpu/gfx12: correct cleanup of 'me' field with gfx_v12_0_me_fini()
drm/amdkfd: Fix instruction hazard in gfx12 trap handler
drm/amdgpu/pm: wire up hwmon fan speed for smu 14.0.2
drm/amd/pm: add unique_id for gfx12
drm/amdgpu: Remove JPEG from vega and carrizo video caps
drm/amdgpu: Fix JPEG video caps max size for navi1x and raven
drm/amdgpu: Fix MPEG2, MPEG4 and VC1 video caps max size
drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse()
accel/qaic: Fix integer overflow in qaic_validate_req()
accel/qaic: Fix possible data corruption in BOs > 2G
drm/v3d: Set job pointer to NULL when the job's fence has an error
drm/v3d: Don't run jobs that have errors flagged in its fence
...
This reverts commit eff6c8ce8d4d7faef75f66614dd20bb50595d261.
Hazem reported a 30% drop in UnixBench spawn test with commit
eff6c8ce8d4d ("sched/core: Reduce cost of sched_move_task when config
autogroup") on a m6g.xlarge AWS EC2 instance with 4 vCPUs and 16 GiB RAM
(aarch64) (single level MC sched domain):
https://lkml.kernel.org/r/20250205151026.13061-1-hagarhem@amazon.com
There is an early bail from sched_move_task() if p->sched_task_group is
equal to p's 'cpu cgroup' (sched_get_task_group()). E.g. both are
pointing to taskgroup '/user.slice/user-1000.slice/session-1.scope'
(Ubuntu '22.04.5 LTS').
So in:
do_exit()
sched_autogroup_exit_task()
sched_move_task()
if sched_get_task_group(p) == p->sched_task_group
return
/* p is enqueued */
dequeue_task() \
sched_change_group() |
task_change_group_fair() |
detach_task_cfs_rq() | (1)
set_task_rq() |
attach_task_cfs_rq() |
enqueue_task() /
(1) isn't called for p anymore.
Turns out that the regression is related to sgs->group_util in
group_is_overloaded() and group_has_capacity(). If (1) isn't called for
all the 'spawn' tasks then sgs->group_util is ~900 and
sgs->group_capacity = 1024 (single CPU sched domain) and this leads to
group_is_overloaded() returning true (2) and group_has_capacity() false
(3) much more often compared to the case when (1) is called.
I.e. there are much more cases of 'group_is_overloaded' and
'group_fully_busy' in WF_FORK wakeup sched_balance_find_dst_cpu() which
then returns much more often a CPU != smp_processor_id() (5).
This isn't good for these extremely short running tasks (FORK + EXIT)
and also involves calling sched_balance_find_dst_group_cpu() unnecessary
(single CPU sched domain).
Instead if (1) is called for 'p->flags & PF_EXITING' then the path
(4),(6) is taken much more often.
select_task_rq_fair(..., wake_flags = WF_FORK)
cpu = smp_processor_id()
new_cpu = sched_balance_find_dst_cpu(..., cpu, ...)
group = sched_balance_find_dst_group(..., cpu)
do {
update_sg_wakeup_stats()
sgs->group_type = group_classify()
if group_is_overloaded() (2)
return group_overloaded
if !group_has_capacity() (3)
return group_fully_busy
return group_has_spare (4)
} while group
if local_sgs.group_type > idlest_sgs.group_type
return idlest (5)
case group_has_spare:
if local_sgs.idle_cpus >= idlest_sgs.idle_cpus
return NULL (6)
Unixbench Tests './Run -c 4 spawn' on:
(a) VM AWS instance (m7gd.16xlarge) with v6.13 ('maxcpus=4 nr_cpus=4')
and Ubuntu 22.04.5 LTS (aarch64).
Shell & test run in '/user.slice/user-1000.slice/session-1.scope'.
w/o patch w/ patch
21005 27120
(b) i7-13700K with tip/sched/core ('nosmt maxcpus=8 nr_cpus=8') and
Ubuntu 22.04.5 LTS (x86_64).
Shell & test run in '/A'.
w/o patch w/ patch
67675 88806
CONFIG_SCHED_AUTOGROUP=y & /sys/proc/kernel/sched_autogroup_enabled equal
0 or 1.
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Hagar Hemdan <hagarhem@amazon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314151345.275739-1-dietmar.eggemann@arm.com
The IBS software filter is filtering kernel samples for regular users in
the PMI handler. It checks the instruction address in the IBS register to
determine if it was in kernel mode or not.
But it turns out that it's possible to report a kernel data address even
if the instruction address belongs to user-space. Matteo Rizzo
found that when an instruction raises an exception, IBS can report some
kernel data addresses like IDT while holding the faulting instruction's
RIP. To prevent an information leak, it should double check if the data
address in PERF_SAMPLE_DATA is in the kernel space as well.
[ mingo: Clarified the changelog ]
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250317163755.1842589-1-namhyung@kernel.org
Pull tracing fix from Steven Rostedt:
"Fix ref count of trace_array in error path of histogram file open
Tracing instances have a ref count to keep them around while files
within their directories are open. This prevents them from being
deleted while they are used.
The histogram code had some files that needed to take the ref count
and that was added, but the error paths did not decrement the ref
counts. This caused the instances from ever being removed if a
histogram file failed to open due to some error"
* tag 'trace-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Correct the refcount if the hist/hist_debug file fails to open
i2c-host-fixes for v6.14-rc7
- omap: fixed irq ACKS to avoid irq storming and system hang.
- ali1535, ali15x3, sis630: fixed error path at probe exit.
Pull pin control fix from Linus Walleij:
- A single patch for Spacemit K1 fixing up the Kconfig to not default
to "y"
* tag 'pinctrl-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: spacemit: PINCTRL_SPACEMIT_K1 should not default to y unconditionally
Use the hidden bank register to identify whether the LDO voltage is
fixed or variable. Remove the read of 'richtek,fixed-microvolt'
property.
Fixes: af1296d15d89 ("regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/dae0321b710518ce32260336e3cc9caf2ba84215.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IOPOLL path posts CQEs when the io_kiocb is marked as completed,
so it cannot rely on the usual retry that non-IOPOLL requests do for
read/write requests.
If -EAGAIN is received and the request should be retried, go through
the normal completion path and let the normal flush logic catch it and
reissue it, like what is done for !IOPOLL reads or writes.
Fixes: d803d123948f ("io_uring/rw: handle -EAGAIN retry at IO completion time")
Reported-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/io-uring/2b43ccfa-644d-4a09-8f8f-39ad71810f41@oracle.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull smb client fix from Steve French:
"smb3 client reconnect fix"
* tag 'v6.14-rc7-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: don't retry IO on failed negprotos with soft mounts
amd-drm-fixes-6.14-2025-03-20:
amdgpu:
- Fix video caps limits on several asics
- SMU 14.x fixes
- GC 12 fixes
- eDP fixes
- DMUB fix
amdkfd:
- GC 12 trap handler fix
- GC 7/8 queue validation fix
radeon:
- VCE IB parsing fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320210800.1358992-1-alexander.deucher@amd.com
The sched_clock_irqtime was defined as a static key in:
8722903cbb8f ("sched: Define sched_clock_irqtime as static key")
However, this change introduces a 'sleeping in atomic context' warning:
arch/x86/kernel/tsc.c:1214 mark_tsc_unstable()
warn: sleeping in atomic context
As analyzed by Dan, the affected code path is as follows:
vcpu_load() <- disables preempt
-> kvm_arch_vcpu_load()
-> mark_tsc_unstable() <- sleeps
virt/kvm/kvm_main.c
166 void vcpu_load(struct kvm_vcpu *vcpu)
167 {
168 int cpu = get_cpu();
^^^^^^^^^^
This get_cpu() disables preemption.
169
170 __this_cpu_write(kvm_running_vcpu, vcpu);
171 preempt_notifier_register(&vcpu->preempt_notifier);
172 kvm_arch_vcpu_load(vcpu, cpu);
173 put_cpu();
174 }
arch/x86/kvm/x86.c
4979 if (unlikely(vcpu->cpu != cpu) || kvm_check_tsc_unstable()) {
4980 s64 tsc_delta = !vcpu->arch.last_host_tsc ? 0 :
4981 rdtsc() - vcpu->arch.last_host_tsc;
4982 if (tsc_delta < 0)
4983 mark_tsc_unstable("KVM discovered backwards TSC");
arch/x86/kernel/tsc.c
1206 void mark_tsc_unstable(char *reason)
1207 {
1208 if (tsc_unstable)
1209 return;
1210
1211 tsc_unstable = 1;
1212 if (using_native_sched_clock())
1213 clear_sched_clock_stable();
--> 1214 disable_sched_clock_irqtime();
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
kernel/jump_label.c
245 void static_key_disable(struct static_key *key)
246 {
247 cpus_read_lock();
^^^^^^^^^^^^^^^^
This lock has a might_sleep() in it which triggers the static checker
warning.
248 static_key_disable_cpuslocked(key);
249 cpus_read_unlock();
250 }
Let revert this change for now as {disable,enable}_sched_clock_irqtime
are used in many places, as pointed out by Sean, including the following:
The code path in clocksource_watchdog():
clocksource_watchdog()
|
-> spin_lock(&watchdog_lock);
|
-> __clocksource_unstable()
|
-> clocksource.mark_unstable() == tsc_cs_mark_unstable()
|
-> disable_sched_clock_irqtime()
And the code path in sched_clock_register():
/* Cannot register a sched_clock with interrupts on */
local_irq_save(flags);
...
/* Enable IRQ time accounting if we have a fast enough sched_clock() */
if (irqtime > 0 || (irqtime == -1 && rate >= 1000000))
enable_sched_clock_irqtime();
local_irq_restore(flags);
[ lkp@intel.com: reported a build error in the prev version ]
[ mingo: cherry-picked it over into sched/urgent ]
Closes: https://lore.kernel.org/kvm/37a79ba3-9ce0-479c-a5b0-2bd75d573ed3@stanley.mountain/
Fixes: 8722903cbb8f ("sched: Define sched_clock_irqtime as static key")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Sean Christopherson <seanjc@google.com>
Debugged-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250205032438.14668-1-laoar.shao@gmail.com
Pull USB fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes and new
usb-serial device ids. Included in here are:
- new usb-serial device ids
- typec driver bugfix
- thunderbolt driver resume bugfix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: fix state transition for SNK_WAIT_CAPABILITIES state in run_state_machine()
USB: serial: ftdi_sio: add support for Altera USB Blaster 3
thunderbolt: Prevent use-after-free in resume from hibernate
USB: serial: option: fix Telit Cinterion FE990A name
USB: serial: option: add Telit Cinterion FE990B compositions
USB: serial: option: match on interface class for Telit FN990B
The function event_{hist,hist_debug}_open() maintains the refcount of
'file->tr' and 'file' through tracing_open_file_tr(). However, it does
not roll back these counts on subsequent failure paths, resulting in a
refcount leak.
A very obvious case is that if the hist/hist_debug file belongs to a
specific instance, the refcount leak will prevent the deletion of that
instance, as it relies on the condition 'tr->ref == 1' within
__remove_instance().
Fix this by calling tracing_release_file_tr() on all failure paths in
event_{hist,hist_debug}_open() to correct the refcount.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250314065335.1202817-1-wutengda@huaweicloud.com
Fixes: 1cc111b9cddc ("tracing: Fix uaf issue when open the hist or hist_debug file")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If i2c_add_adapter() fails, the request_region() call in sis630_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3d607601f2c38e896b10207963c6ab499ca5c307.1741033587.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Pull io_uring fix from Jens Axboe:
"Single fix heading to stable, fixing an issue with io_req_msg_cleanup()
sometimes too eagerly clearing cleanup flags"
* tag 'io_uring-6.14-20250321' of git://git.kernel.dk/linux:
io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally
Merely enabling compile-testing should not enable additional
functionality.
Fixes: 7ff4faba63571c51 ("pinctrl: spacemit: enable config option")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/6881b8d1ad74ac780af8a974e604b5ef3f5d4aad.1742198691.git.geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the hidden bank RG to get the correct buck converter phase mapping.
Fixes: 85a11f55621a ("regulator: rtq2208: Add Richtek RTQ2208 SubPMIC")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/ae3245aa713f76000dbd20b4ad6f66d30611d3b8.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Match the compat part of io_sendmsg_copy_hdr() with its counterpart and
save msg_control.
Fixes: c55978024d123 ("io_uring/net: move receive multishot out of the generic msghdr path")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2a8418821fe83d3b64350ad2b3c0303e9b732bbd.1740498502.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull dma-mapping fix from Marek Szyprowski:
- fix missing clear bdr in check_ram_in_range_map() (Baochen Qiang)
* tag 'dma-mapping-6.14-2025-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: fix missing clear bdr in check_ram_in_range_map()
If @server->tcpStatus is set to CifsNeedReconnect after acquiring
@ses->session_mutex in smb2_reconnect() or cifs_reconnect_tcon(), it
means that a concurrent thread failed to negotiate, in which case the
server is no longer responding to any SMB requests, so there is no
point making the caller retry the IO by returning -EAGAIN.
Fix this by returning -EHOSTDOWN to the callers on soft mounts.
Cc: David Howells <dhowells@redhat.com>
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Driver Changes:
- Fix for an error if exporting a dma-buf multiple time (Tomasz)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z9xalLaCWsNbh0P0@fedora
Currently, it seems like the code was carried over from RDNA3 because
it assumes two possible values to set. RDNA4, instead of having:
0: min SCLK
1: max SCLK
only has
0: SCLK offset
This change makes it so it only reports current offset value instead of
showing possible min/max values and their indices. Moreover, it now only
accepts the offset as a value, without the indice index.
Additionally, the lower bound was printed as %u by mistake.
Old:
OD_SCLK_OFFSET:
0: -500Mhz
1: 1000Mhz
OD_MCLK:
0: 97Mhz
1: 1259MHz
OD_VDDGFX_OFFSET:
0mV
OD_RANGE:
SCLK_OFFSET: -500Mhz 1000Mhz
MCLK: 97Mhz 1500Mhz
VDDGFX_OFFSET: -200mv 0mv
New:
OD_SCLK_OFFSET:
0Mhz
OD_MCLK:
0: 97Mhz
1: 1259MHz
OD_VDDGFX_OFFSET:
0mV
OD_RANGE:
SCLK_OFFSET: -500Mhz 1000Mhz
MCLK: 97Mhz 1500Mhz
VDDGFX_OFFSET: -200mv 0mv
Setting this offset:
Old: "s 1 <offset>"
New: "s <offset>"
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4036
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1cfeb60e6e8837b1de5eb4e17df7cf31f4442144)
Cc: stable@vger.kernel.org # 6.12.x
Pull input updates from Dmitry Torokhov:
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Remove myself from the goodix touchscreen maintainers
Input: iqs7222 - preserve system status register
Input: i8042 - swap old quirk combination with new quirk for more devices
Input: i8042 - swap old quirk combination with new quirk for several devices
Input: i8042 - add required quirks for missing old boardnames
Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
Input: xpad - rename QH controller to Legion Go S
Input: xpad - add support for TECNO Pocket Go
Input: xpad - add support for ZOTAC Gaming Zone
Input: goodix-berlin - fix vddio regulator references
Input: goodix-berlin - fix comment referencing wrong regulator
Input: imagis - add support for imagis IST3038H
dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
Input: xpad - add multiple supported devices
Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
Input: ads7846 - fix gpiod allocation
Input: wdt87xx_i2c - fix compiler warning
A subtle error got introduced while manually fixing merge conflict in
tcpm.c for commit 85c4efbe6088 ("Merge v6.12-rc6 into usb-next"). As a
result of this error, the next state is unconditionally set to
SNK_WAIT_CAPABILITIES_TIMEOUT while handling SNK_WAIT_CAPABILITIES state
in run_state_machine(...).
Fix this by setting new state of TCPM state machine to `upcoming_state`
(that is set to different values based on conditions).
Cc: stable@vger.kernel.org
Fixes: 85c4efbe60888 ("Merge v6.12-rc6 into usb-next")
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250310-fix-snk-wait-timeout-v6-14-rc6-v1-1-5db14475798f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull dmaengine fixes from Vinod Koul:
- tegra210 div_u64 divison and max page fixes
- revert Qualcomm unavailable register workaround which is causing
regression, fixes have been proposed but still gaps are present so
revert this for now
* tag 'dmaengine-fix-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: Revert "dmaengine: qcom: bam_dma: Avoid writing unavailable register"
dmaengine: tegra210-adma: check for adma max page
dmaengine: tegra210-adma: Use div_u64 for 64 bit division
If i2c_add_adapter() fails, the request_region() call in ali15x3_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/9b2090cbcc02659f425188ea05f2e02745c4e67b.1741031878.git.christophe.jaillet@wanadoo.fr
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
Due to asynchronous driver probing there is a chance that the dummy
regulator hasn't already been probed when first accessing it.
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://patch.msgid.link/20250313103051.32430-3-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Move code forcing synchronous execution of multishot read requests out
a more generic __io_read().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4ad7b928c776d1ad59addb9fff64ef2d1fc474d5.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull vfs fixes from Christian Brauner:
"A final set of fixes for this cycle:
VFS:
- Ensure that the stable offset api doesn't return duplicate
directory entries when userspace has to perform the getdents call
multiple times on large directories
afs:
- Prevent invalid pointer dereference during get_link RCU pathwalk
fuse:
- Fix deadlock caused by uninitialized rings when using io_uring with
fuse
- Handle race condition when using io_uring with fuse to prevent NULL
dereference
libnetfs:
- Ensure that invalidate_cache is only called if implemented
- Fix collection of results during pause when collection is
offloaded
- Ensure rolling_buffer_load_from_ra() doesn't clear mark bits
- Make netfs_unbuffered_read() return ssize_t rather than int"
* tag 'vfs-6.14-final.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: Fix duplicate directory entry in offset_dir_lookup
fuse: fix possible deadlock if rings are never initialized
netfs: Fix netfs_unbuffered_read() to return ssize_t rather than int
netfs: Fix rolling_buffer_load_from_ra() to not clear mark bits
netfs: Call `invalidate_cache` only if implemented
netfs: Fix collection of results during pause when collection offloaded
fuse: fix uring race condition for null dereference of fc
afs: Fix afs_atcell_get_link() to check if ws_cell is unset first
As discussed in [1], if 'bdr' is set once, it would never get
cleared, hence 0 is always returned.
Refactor the range check hunk into a new helper dma_find_range(),
which allows 'bdr' to be cleared in each iteration.
Link: https://lore.kernel.org/all/64931fac-085b-4ff3-9314-84bac2fa9bdb@quicinc.com/ # [1]
Fixes: a409d9600959 ("dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://lore.kernel.org/r/20250307030350.69144-1-quic_bqiang@quicinc.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
A sched fence reference leak fix, two fence fixes for v3d, two overflow
fixes for quaic, and a iommu handling fix for host1x.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320-valiant-outstanding-nightingale-e9acae@houat
The `struct ttm_resource->placement` contains TTM_PL_FLAG_* flags, but
it was incorrectly tested for XE_PL_* flags.
This caused xe_dma_buf_pin() to always fail when invoked for
the second time. Fix this by checking the `mem_type` field instead.
Fixes: 7764222d54b7 ("drm/xe: Disallow pinning dma-bufs in VRAM")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100353.2137964-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit b96dabdba9b95f71ded50a1c094ee244408b2a8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[WHY]
The fw_state in dmub_srv was assigned with wrong address.
The address was pointed to the firmware region.
[HOW]
Fix the firmware state by using DMUB_DEBUG_FW_STATE_OFFSET
in dmub_cmd.h.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f57b38ac85a01bf03020cc0a9761d63e5c0ce197)
Although IBS "swfilt" can prevent leaking samples with kernel RIP to the
userspace, there are few subtle cases where a 'data' address and/or a
'branch target' address can fall under kernel address range although RIP
is from userspace. Prevent leaking kernel 'data' addresses by discarding
such samples when {exclude_kernel=1,swfilt=1}.
IBS can now be invoked by unprivileged user with the introduction of
"swfilt". However, this creates a loophole in the interface where an
unprivileged user can get physical address of the userspace virtual
addresses through IBS register raw dump (PERF_SAMPLE_RAW). Prevent this
as well.
This upstream commit fixed the most obvious leak:
65a99264f5e5 perf/x86: Check data address for IBS software filter
Follow that up with a more complete fix.
Fixes: d29e744c7167 ("perf/x86: Relax privilege filter restriction on AMD IBS")
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250321161251.1033-1-ravi.bangoria@amd.com
irq allocated with devm_request_irq() will be freed in devm_irq_release(),
using free_irq() in ->remove() will causes a dangling pointer, and a
subsequent double free. So remove the free_irq() in the error path and
remove path.
Fixes: 969864efae78 ("i2c: amd-mp2: use msix/msi if the hardware supports")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20221103121146.99836-1-yangyingliang@huawei.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Pull io_uring fix from Jens Axboe:
"Just a single fix for the commit that went into your tree yesterday,
which exposed an issue with not always clearing notifications. That
could cause them to be used more than once"
* tag 'io_uring-6.14-20250322' of git://git.kernel.dk/linux:
io_uring/net: fix sendzc double notif flush
Once a key's reference count has been reduced to 0, the garbage collector
thread may destroy it at any time and so key_put() is not allowed to touch
the key after that point. The most key_put() is normally allowed to do is
to touch key_gc_work as that's a static global variable.
However, in an effort to speed up the reclamation of quota, this is now
done in key_put() once the key's usage is reduced to 0 - but now the code
is looking at the key after the deadline, which is forbidden.
Fix this by using a flag to indicate that a key can be gc'd now rather than
looking at the key's refcount in the garbage collector.
Fixes: 9578e327b2b4 ("keys: update key quotas in key_put()")
Reported-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673b6aec.050a0220.87769.004a.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pull x86 perf events fixes from Ingo Molnar:
"Two fixes: an RAPL PMU driver error handling fix, and an AMD IBS
software filter fix"
* tag 'perf-urgent-2025-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix error handling in init_rapl_pmus()
perf/x86: Check data address for IBS software filter
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 5823 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
Call Trace:
<TASK>
io_notif_flush io_uring/notif.h:40 [inline]
io_send_zc_cleanup+0x121/0x170 io_uring/net.c:1222
io_clean_op+0x58c/0x9a0 io_uring/io_uring.c:406
io_free_batch_list io_uring/io_uring.c:1429 [inline]
__io_submit_flush_completions+0xc16/0xd20 io_uring/io_uring.c:1470
io_submit_flush_completions io_uring/io_uring.h:159 [inline]
Before the blamed commit, sendzc relied on io_req_msg_cleanup() to clear
REQ_F_NEED_CLEANUP, so after the following snippet the request will
never hit the core io_uring cleanup path.
io_notif_flush();
io_req_msg_cleanup();
The easiest fix is to null the notification. io_send_zc_cleanup() can
still be called after, but it's tolerated.
Reported-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Tested-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Fixes: cc34d8330e036 ("io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e1306007458b8891c88c4f20c966a17595f766b0.1742643795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If init_rapl_pmu() fails while allocating memory for "rapl_pmu" objects,
we miss freeing the "rapl_pmus" object in the error path. Fix that.
Fixes: 9b99d65c0bb4 ("perf/x86/rapl: Move the pmu allocation out of CPU hotplug")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250320100617.4480-1-dhananjay.ugwekar@amd.com
Pull i2c fixes from Wolfram Sang:
- omap: fix irq ACKS to avoid irq storming and system hang
- ali1535, ali15x3, sis630: fix error path at probe exit
* tag 'i2c-for-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sis630: Fix an error handling path in sis630_probe()
i2c: ali15x3: Fix an error handling path in ali15x3_probe()
i2c: ali1535: Fix an error handling path in ali1535_probe()
i2c: omap: fix IRQ storms
Commit c780d01cf1a6 ("media: vb2: vb2_core_queue_init(): sanity check lock
and wait_prepare/finish") added a sanity check to ensure that if there are
no wait_prepare/finish callbacks set by the driver, then the vb2_queue lock
must be set, since otherwise the vb2 core cannot do correct locking.
The rtl2832_sdr.c triggered this warning: it turns out that while the
driver does set this lock, it sets it too late. So move it up to before
the vb2_queue_init() call.
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Closes: https://lore.kernel.org/linux-media/20241211042355.8479-1-user@am64/
Fixes: 8fcd2795d22a ("media: rtl2832_sdr: drop vb2_ops_wait_prepare/finish")
Cc: stable@vger.kernel.org
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Pull regulator fixes from Mark Brown:
"More fixes than I'd like at this point, some of which is due to me
cooking things in -next for a bit and resetting that cooking time as
more fixes came in.
- Christian Eggers fixed some race conditions with the dummy
regulator not being available very early in boot due to the use of
asynchronous probing, both the provider side (ensuring that it's
availalbe) and consumer side (handling things if that goes wrong)
are fixed
- Ludvig Pärsson fixed some lockdep issues with the debugfs
registration for regulators holding more locks than it really needs
causing issues later when looking at the resulting debugfs.boot
- Some device specific fixes for incorrect descriptions of the
RTQ2208 from ChiYuan Huang"
* tag 'regulator-fix-v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Fix the LDO DVS capability
regulator: rtq2208: Fix incorrect buck converter phase mapping
regulator: check that dummy regulator has been probed before using it
regulator: dummy: force synchronous probing
regulator: core: Fix deadlock in create_regulator()
Fix a reference count leak in slave_show() by properly putting the device
reference obtained from device_find_any_child().
Fixes: 6c364062bfed ("spi: core: Add support for registering SPI slave controllers")
Fixes: c21b0837983d ("spi: Use device_find_any_child() instead of custom approach")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250319032305.70340-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
io_req_msg_cleanup() relies on the fact that io_netmsg_recycle() will
always fully recycle, but that may not be the case if the msg cache
was already full. To ensure that normal cleanup always gets run,
let io_netmsg_recycle() deal with clearing the relevant cleanup flags,
as it knows exactly when that should be done.
Cc: stable@vger.kernel.org
Reported-by: David Wei <dw@davidwei.uk>
Fixes: 75191341785e ("io_uring/net: add iovec recycling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull drm fixes from Dave Airlie:
"Just the usual spread of a bunch for amdgpu, and small changes to
others.
scheduler:
- fix fence reference leak
xe:
- Fix for an error if exporting a dma-buf multiple time
amdgpu:
- Fix video caps limits on several asics
- SMU 14.x fixes
- GC 12 fixes
- eDP fixes
- DMUB fix
amdkfd:
- GC 12 trap handler fix
- GC 7/8 queue validation fix
radeon:
- VCE IB parsing fix
v3d:
- fix job error handling bugs
qaic:
- fix two integer overflows
host1x:
- fix NULL domain handling"
* tag 'drm-fixes-2025-03-21' of https://gitlab.freedesktop.org/drm/kernel: (21 commits)
drm/xe: Fix exporting xe buffers multiple times
gpu: host1x: Do not assume that a NULL domain means no DMA IOMMU
drm/amdgpu/pm: Handle SCLK offset correctly in overdrive for smu 14.0.2
drm/amd/display: Fix incorrect fw_state address in dmub_srv
drm/amd/display: Use HW lock mgr for PSR1 when only one eDP
drm/amd/display: Fix message for support_edp0_on_dp1
drm/amdkfd: Fix user queue validation on Gfx7/8
drm/amdgpu: Restore uncached behaviour on GFX12
drm/amdgpu/gfx12: correct cleanup of 'me' field with gfx_v12_0_me_fini()
drm/amdkfd: Fix instruction hazard in gfx12 trap handler
drm/amdgpu/pm: wire up hwmon fan speed for smu 14.0.2
drm/amd/pm: add unique_id for gfx12
drm/amdgpu: Remove JPEG from vega and carrizo video caps
drm/amdgpu: Fix JPEG video caps max size for navi1x and raven
drm/amdgpu: Fix MPEG2, MPEG4 and VC1 video caps max size
drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse()
accel/qaic: Fix integer overflow in qaic_validate_req()
accel/qaic: Fix possible data corruption in BOs > 2G
drm/v3d: Set job pointer to NULL when the job's fence has an error
drm/v3d: Don't run jobs that have errors flagged in its fence
...
This reverts commit eff6c8ce8d4d7faef75f66614dd20bb50595d261.
Hazem reported a 30% drop in UnixBench spawn test with commit
eff6c8ce8d4d ("sched/core: Reduce cost of sched_move_task when config
autogroup") on a m6g.xlarge AWS EC2 instance with 4 vCPUs and 16 GiB RAM
(aarch64) (single level MC sched domain):
https://lkml.kernel.org/r/20250205151026.13061-1-hagarhem@amazon.com
There is an early bail from sched_move_task() if p->sched_task_group is
equal to p's 'cpu cgroup' (sched_get_task_group()). E.g. both are
pointing to taskgroup '/user.slice/user-1000.slice/session-1.scope'
(Ubuntu '22.04.5 LTS').
So in:
do_exit()
sched_autogroup_exit_task()
sched_move_task()
if sched_get_task_group(p) == p->sched_task_group
return
/* p is enqueued */
dequeue_task() \
sched_change_group() |
task_change_group_fair() |
detach_task_cfs_rq() | (1)
set_task_rq() |
attach_task_cfs_rq() |
enqueue_task() /
(1) isn't called for p anymore.
Turns out that the regression is related to sgs->group_util in
group_is_overloaded() and group_has_capacity(). If (1) isn't called for
all the 'spawn' tasks then sgs->group_util is ~900 and
sgs->group_capacity = 1024 (single CPU sched domain) and this leads to
group_is_overloaded() returning true (2) and group_has_capacity() false
(3) much more often compared to the case when (1) is called.
I.e. there are much more cases of 'group_is_overloaded' and
'group_fully_busy' in WF_FORK wakeup sched_balance_find_dst_cpu() which
then returns much more often a CPU != smp_processor_id() (5).
This isn't good for these extremely short running tasks (FORK + EXIT)
and also involves calling sched_balance_find_dst_group_cpu() unnecessary
(single CPU sched domain).
Instead if (1) is called for 'p->flags & PF_EXITING' then the path
(4),(6) is taken much more often.
select_task_rq_fair(..., wake_flags = WF_FORK)
cpu = smp_processor_id()
new_cpu = sched_balance_find_dst_cpu(..., cpu, ...)
group = sched_balance_find_dst_group(..., cpu)
do {
update_sg_wakeup_stats()
sgs->group_type = group_classify()
if group_is_overloaded() (2)
return group_overloaded
if !group_has_capacity() (3)
return group_fully_busy
return group_has_spare (4)
} while group
if local_sgs.group_type > idlest_sgs.group_type
return idlest (5)
case group_has_spare:
if local_sgs.idle_cpus >= idlest_sgs.idle_cpus
return NULL (6)
Unixbench Tests './Run -c 4 spawn' on:
(a) VM AWS instance (m7gd.16xlarge) with v6.13 ('maxcpus=4 nr_cpus=4')
and Ubuntu 22.04.5 LTS (aarch64).
Shell & test run in '/user.slice/user-1000.slice/session-1.scope'.
w/o patch w/ patch
21005 27120
(b) i7-13700K with tip/sched/core ('nosmt maxcpus=8 nr_cpus=8') and
Ubuntu 22.04.5 LTS (x86_64).
Shell & test run in '/A'.
w/o patch w/ patch
67675 88806
CONFIG_SCHED_AUTOGROUP=y & /sys/proc/kernel/sched_autogroup_enabled equal
0 or 1.
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Hagar Hemdan <hagarhem@amazon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314151345.275739-1-dietmar.eggemann@arm.com
The IBS software filter is filtering kernel samples for regular users in
the PMI handler. It checks the instruction address in the IBS register to
determine if it was in kernel mode or not.
But it turns out that it's possible to report a kernel data address even
if the instruction address belongs to user-space. Matteo Rizzo
found that when an instruction raises an exception, IBS can report some
kernel data addresses like IDT while holding the faulting instruction's
RIP. To prevent an information leak, it should double check if the data
address in PERF_SAMPLE_DATA is in the kernel space as well.
[ mingo: Clarified the changelog ]
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250317163755.1842589-1-namhyung@kernel.org
Pull tracing fix from Steven Rostedt:
"Fix ref count of trace_array in error path of histogram file open
Tracing instances have a ref count to keep them around while files
within their directories are open. This prevents them from being
deleted while they are used.
The histogram code had some files that needed to take the ref count
and that was added, but the error paths did not decrement the ref
counts. This caused the instances from ever being removed if a
histogram file failed to open due to some error"
* tag 'trace-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Correct the refcount if the hist/hist_debug file fails to open
Use the hidden bank register to identify whether the LDO voltage is
fixed or variable. Remove the read of 'richtek,fixed-microvolt'
property.
Fixes: af1296d15d89 ("regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/dae0321b710518ce32260336e3cc9caf2ba84215.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IOPOLL path posts CQEs when the io_kiocb is marked as completed,
so it cannot rely on the usual retry that non-IOPOLL requests do for
read/write requests.
If -EAGAIN is received and the request should be retried, go through
the normal completion path and let the normal flush logic catch it and
reissue it, like what is done for !IOPOLL reads or writes.
Fixes: d803d123948f ("io_uring/rw: handle -EAGAIN retry at IO completion time")
Reported-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/io-uring/2b43ccfa-644d-4a09-8f8f-39ad71810f41@oracle.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
amd-drm-fixes-6.14-2025-03-20:
amdgpu:
- Fix video caps limits on several asics
- SMU 14.x fixes
- GC 12 fixes
- eDP fixes
- DMUB fix
amdkfd:
- GC 12 trap handler fix
- GC 7/8 queue validation fix
radeon:
- VCE IB parsing fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320210800.1358992-1-alexander.deucher@amd.com
The sched_clock_irqtime was defined as a static key in:
8722903cbb8f ("sched: Define sched_clock_irqtime as static key")
However, this change introduces a 'sleeping in atomic context' warning:
arch/x86/kernel/tsc.c:1214 mark_tsc_unstable()
warn: sleeping in atomic context
As analyzed by Dan, the affected code path is as follows:
vcpu_load() <- disables preempt
-> kvm_arch_vcpu_load()
-> mark_tsc_unstable() <- sleeps
virt/kvm/kvm_main.c
166 void vcpu_load(struct kvm_vcpu *vcpu)
167 {
168 int cpu = get_cpu();
^^^^^^^^^^
This get_cpu() disables preemption.
169
170 __this_cpu_write(kvm_running_vcpu, vcpu);
171 preempt_notifier_register(&vcpu->preempt_notifier);
172 kvm_arch_vcpu_load(vcpu, cpu);
173 put_cpu();
174 }
arch/x86/kvm/x86.c
4979 if (unlikely(vcpu->cpu != cpu) || kvm_check_tsc_unstable()) {
4980 s64 tsc_delta = !vcpu->arch.last_host_tsc ? 0 :
4981 rdtsc() - vcpu->arch.last_host_tsc;
4982 if (tsc_delta < 0)
4983 mark_tsc_unstable("KVM discovered backwards TSC");
arch/x86/kernel/tsc.c
1206 void mark_tsc_unstable(char *reason)
1207 {
1208 if (tsc_unstable)
1209 return;
1210
1211 tsc_unstable = 1;
1212 if (using_native_sched_clock())
1213 clear_sched_clock_stable();
--> 1214 disable_sched_clock_irqtime();
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
kernel/jump_label.c
245 void static_key_disable(struct static_key *key)
246 {
247 cpus_read_lock();
^^^^^^^^^^^^^^^^
This lock has a might_sleep() in it which triggers the static checker
warning.
248 static_key_disable_cpuslocked(key);
249 cpus_read_unlock();
250 }
Let revert this change for now as {disable,enable}_sched_clock_irqtime
are used in many places, as pointed out by Sean, including the following:
The code path in clocksource_watchdog():
clocksource_watchdog()
|
-> spin_lock(&watchdog_lock);
|
-> __clocksource_unstable()
|
-> clocksource.mark_unstable() == tsc_cs_mark_unstable()
|
-> disable_sched_clock_irqtime()
And the code path in sched_clock_register():
/* Cannot register a sched_clock with interrupts on */
local_irq_save(flags);
...
/* Enable IRQ time accounting if we have a fast enough sched_clock() */
if (irqtime > 0 || (irqtime == -1 && rate >= 1000000))
enable_sched_clock_irqtime();
local_irq_restore(flags);
[ lkp@intel.com: reported a build error in the prev version ]
[ mingo: cherry-picked it over into sched/urgent ]
Closes: https://lore.kernel.org/kvm/37a79ba3-9ce0-479c-a5b0-2bd75d573ed3@stanley.mountain/
Fixes: 8722903cbb8f ("sched: Define sched_clock_irqtime as static key")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Dan Carpenter <dan.carpenter@linaro.org>
Debugged-by: Sean Christopherson <seanjc@google.com>
Debugged-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250205032438.14668-1-laoar.shao@gmail.com
Pull USB fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes and new
usb-serial device ids. Included in here are:
- new usb-serial device ids
- typec driver bugfix
- thunderbolt driver resume bugfix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: fix state transition for SNK_WAIT_CAPABILITIES state in run_state_machine()
USB: serial: ftdi_sio: add support for Altera USB Blaster 3
thunderbolt: Prevent use-after-free in resume from hibernate
USB: serial: option: fix Telit Cinterion FE990A name
USB: serial: option: add Telit Cinterion FE990B compositions
USB: serial: option: match on interface class for Telit FN990B
The function event_{hist,hist_debug}_open() maintains the refcount of
'file->tr' and 'file' through tracing_open_file_tr(). However, it does
not roll back these counts on subsequent failure paths, resulting in a
refcount leak.
A very obvious case is that if the hist/hist_debug file belongs to a
specific instance, the refcount leak will prevent the deletion of that
instance, as it relies on the condition 'tr->ref == 1' within
__remove_instance().
Fix this by calling tracing_release_file_tr() on all failure paths in
event_{hist,hist_debug}_open() to correct the refcount.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250314065335.1202817-1-wutengda@huaweicloud.com
Fixes: 1cc111b9cddc ("tracing: Fix uaf issue when open the hist or hist_debug file")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If i2c_add_adapter() fails, the request_region() call in sis630_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3d607601f2c38e896b10207963c6ab499ca5c307.1741033587.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Merely enabling compile-testing should not enable additional
functionality.
Fixes: 7ff4faba63571c51 ("pinctrl: spacemit: enable config option")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/6881b8d1ad74ac780af8a974e604b5ef3f5d4aad.1742198691.git.geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the hidden bank RG to get the correct buck converter phase mapping.
Fixes: 85a11f55621a ("regulator: rtq2208: Add Richtek RTQ2208 SubPMIC")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/ae3245aa713f76000dbd20b4ad6f66d30611d3b8.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Match the compat part of io_sendmsg_copy_hdr() with its counterpart and
save msg_control.
Fixes: c55978024d123 ("io_uring/net: move receive multishot out of the generic msghdr path")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2a8418821fe83d3b64350ad2b3c0303e9b732bbd.1740498502.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If @server->tcpStatus is set to CifsNeedReconnect after acquiring
@ses->session_mutex in smb2_reconnect() or cifs_reconnect_tcon(), it
means that a concurrent thread failed to negotiate, in which case the
server is no longer responding to any SMB requests, so there is no
point making the caller retry the IO by returning -EAGAIN.
Fix this by returning -EHOSTDOWN to the callers on soft mounts.
Cc: David Howells <dhowells@redhat.com>
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, it seems like the code was carried over from RDNA3 because
it assumes two possible values to set. RDNA4, instead of having:
0: min SCLK
1: max SCLK
only has
0: SCLK offset
This change makes it so it only reports current offset value instead of
showing possible min/max values and their indices. Moreover, it now only
accepts the offset as a value, without the indice index.
Additionally, the lower bound was printed as %u by mistake.
Old:
OD_SCLK_OFFSET:
0: -500Mhz
1: 1000Mhz
OD_MCLK:
0: 97Mhz
1: 1259MHz
OD_VDDGFX_OFFSET:
0mV
OD_RANGE:
SCLK_OFFSET: -500Mhz 1000Mhz
MCLK: 97Mhz 1500Mhz
VDDGFX_OFFSET: -200mv 0mv
New:
OD_SCLK_OFFSET:
0Mhz
OD_MCLK:
0: 97Mhz
1: 1259MHz
OD_VDDGFX_OFFSET:
0mV
OD_RANGE:
SCLK_OFFSET: -500Mhz 1000Mhz
MCLK: 97Mhz 1500Mhz
VDDGFX_OFFSET: -200mv 0mv
Setting this offset:
Old: "s 1 <offset>"
New: "s <offset>"
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4036
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1cfeb60e6e8837b1de5eb4e17df7cf31f4442144)
Cc: stable@vger.kernel.org # 6.12.x
Pull input updates from Dmitry Torokhov:
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Remove myself from the goodix touchscreen maintainers
Input: iqs7222 - preserve system status register
Input: i8042 - swap old quirk combination with new quirk for more devices
Input: i8042 - swap old quirk combination with new quirk for several devices
Input: i8042 - add required quirks for missing old boardnames
Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
Input: xpad - rename QH controller to Legion Go S
Input: xpad - add support for TECNO Pocket Go
Input: xpad - add support for ZOTAC Gaming Zone
Input: goodix-berlin - fix vddio regulator references
Input: goodix-berlin - fix comment referencing wrong regulator
Input: imagis - add support for imagis IST3038H
dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
Input: xpad - add multiple supported devices
Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
Input: ads7846 - fix gpiod allocation
Input: wdt87xx_i2c - fix compiler warning
A subtle error got introduced while manually fixing merge conflict in
tcpm.c for commit 85c4efbe6088 ("Merge v6.12-rc6 into usb-next"). As a
result of this error, the next state is unconditionally set to
SNK_WAIT_CAPABILITIES_TIMEOUT while handling SNK_WAIT_CAPABILITIES state
in run_state_machine(...).
Fix this by setting new state of TCPM state machine to `upcoming_state`
(that is set to different values based on conditions).
Cc: stable@vger.kernel.org
Fixes: 85c4efbe60888 ("Merge v6.12-rc6 into usb-next")
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250310-fix-snk-wait-timeout-v6-14-rc6-v1-1-5db14475798f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull dmaengine fixes from Vinod Koul:
- tegra210 div_u64 divison and max page fixes
- revert Qualcomm unavailable register workaround which is causing
regression, fixes have been proposed but still gaps are present so
revert this for now
* tag 'dmaengine-fix-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: Revert "dmaengine: qcom: bam_dma: Avoid writing unavailable register"
dmaengine: tegra210-adma: check for adma max page
dmaengine: tegra210-adma: Use div_u64 for 64 bit division
If i2c_add_adapter() fails, the request_region() call in ali15x3_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/9b2090cbcc02659f425188ea05f2e02745c4e67b.1741031878.git.christophe.jaillet@wanadoo.fr
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
Due to asynchronous driver probing there is a chance that the dummy
regulator hasn't already been probed when first accessing it.
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://patch.msgid.link/20250313103051.32430-3-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Move code forcing synchronous execution of multishot read requests out
a more generic __io_read().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4ad7b928c776d1ad59addb9fff64ef2d1fc474d5.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull vfs fixes from Christian Brauner:
"A final set of fixes for this cycle:
VFS:
- Ensure that the stable offset api doesn't return duplicate
directory entries when userspace has to perform the getdents call
multiple times on large directories
afs:
- Prevent invalid pointer dereference during get_link RCU pathwalk
fuse:
- Fix deadlock caused by uninitialized rings when using io_uring with
fuse
- Handle race condition when using io_uring with fuse to prevent NULL
dereference
libnetfs:
- Ensure that invalidate_cache is only called if implemented
- Fix collection of results during pause when collection is
offloaded
- Ensure rolling_buffer_load_from_ra() doesn't clear mark bits
- Make netfs_unbuffered_read() return ssize_t rather than int"
* tag 'vfs-6.14-final.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: Fix duplicate directory entry in offset_dir_lookup
fuse: fix possible deadlock if rings are never initialized
netfs: Fix netfs_unbuffered_read() to return ssize_t rather than int
netfs: Fix rolling_buffer_load_from_ra() to not clear mark bits
netfs: Call `invalidate_cache` only if implemented
netfs: Fix collection of results during pause when collection offloaded
fuse: fix uring race condition for null dereference of fc
afs: Fix afs_atcell_get_link() to check if ws_cell is unset first
As discussed in [1], if 'bdr' is set once, it would never get
cleared, hence 0 is always returned.
Refactor the range check hunk into a new helper dma_find_range(),
which allows 'bdr' to be cleared in each iteration.
Link: https://lore.kernel.org/all/64931fac-085b-4ff3-9314-84bac2fa9bdb@quicinc.com/ # [1]
Fixes: a409d9600959 ("dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://lore.kernel.org/r/20250307030350.69144-1-quic_bqiang@quicinc.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
A sched fence reference leak fix, two fence fixes for v3d, two overflow
fixes for quaic, and a iommu handling fix for host1x.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320-valiant-outstanding-nightingale-e9acae@houat
The `struct ttm_resource->placement` contains TTM_PL_FLAG_* flags, but
it was incorrectly tested for XE_PL_* flags.
This caused xe_dma_buf_pin() to always fail when invoked for
the second time. Fix this by checking the `mem_type` field instead.
Fixes: 7764222d54b7 ("drm/xe: Disallow pinning dma-bufs in VRAM")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100353.2137964-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit b96dabdba9b95f71ded50a1c094ee244408b2a8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[WHY]
The fw_state in dmub_srv was assigned with wrong address.
The address was pointed to the firmware region.
[HOW]
Fix the firmware state by using DMUB_DEBUG_FW_STATE_OFFSET
in dmub_cmd.h.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f57b38ac85a01bf03020cc0a9761d63e5c0ce197)