tjh.dev
commits
Pull KVM x86 fixes from Paolo Bonzini:
- Disable AVIC on SNP-enabled systems that don't allow writes to the
virtual APIC page, as such hosts will hit unexpected RMP #PFs in the
host when running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to
determine if a guest with protected register state is in 64-bit mode
(KVM's ABI is to assume such guests only make hypercalls in 64-bit
mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix
a regression with Windows guests, and because KVM's read-only
behavior appears to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed
given the existing SPTE. This fixes a benign WARN (other than the
WARN itself) due to unexpectedly replacing a writable SPTE with a
read-only SPTE.
- Emit a warning when KVM is configured with ignore_msrs=1 and also to
hide the MSRs that the guest is looking for from the kernel logs.
ignore_msrs can trick guests into assuming that certain processor
features are present, and this in turn leads to bogus bug reports.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: let it be known that ignore_msrs is a bad idea
KVM: VMX: don't include '<linux/find.h>' directly
KVM: x86/mmu: Treat TDP MMU faults as spurious if access is already allowed
KVM: SVM: Allow guest writes to set MSR_AMD64_DE_CFG bits
KVM: x86: Play nice with protected guests in complete_hypercall_exit()
KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed feature
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
KVM x86 fixes for 6.13:
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
Google Juniper and other Chromebook platforms have a very old bootloader
which populates /firmware node without proper address/size-cells leading
to warnings:
Missing '#address-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Hardware name: Google juniper sku16 board (DT)
...
Missing '#size-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:133 of_bus_n_size_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Tainted: [W]=WARN
Hardware name: Google juniper sku16 board (DT)
These platform won't receive updated bootloader/firmware, so add an
exclusion for platforms with a "coreboot" compatible node. While this is
wider than necessary, that's the easiest fix and it doesn't doesn't
matter if we miss checking other platforms using coreboot.
We may revisit this later and address with a fixup to the DT itself.
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/Z0NUdoG17EwuCigT@sashalap/
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
When running KVM with ignore_msrs=1 and report_ignored_msrs=0, the user has
no clue that that the guest is being lied to. This may cause bug reports
such as https://gitlab.com/qemu-project/qemu/-/issues/2571, where enabling
a CPUID bit in QEMU caused Linux guests to try reading MSR_CU_DEF_ERR; and
being lied about the existence of MSR_CU_DEF_ERR caused the guest to assume
other things about the local APIC which were not true:
Sep 14 12:02:53 kernel: mce: [Firmware Bug]: Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.
Sep 14 12:02:53 kernel: unchecked MSR access error: RDMSR from 0x852 at rIP: 0xffffffffb548ffa7 (native_read_msr+0x7/0x40)
Sep 14 12:02:53 kernel: Call Trace:
...
Sep 14 12:02:53 kernel: native_apic_msr_read+0x20/0x30
Sep 14 12:02:53 kernel: setup_APIC_eilvt+0x47/0x110
Sep 14 12:02:53 kernel: mce_amd_feature_init+0x485/0x4e0
...
Sep 14 12:02:53 kernel: [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu
Without reported_ignored_msrs=0 at least the host kernel log will contain
enough information to avoid going on a wild goose chase. But if reports
about individual MSR accesses are being silenced too, at least complain
loudly the first time a VM is started.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Treat slow-path TDP MMU faults as spurious if the access is allowed given
the existing SPTE to fix a benign warning (other than the WARN itself)
due to replacing a writable SPTE with a read-only SPTE, and to avoid the
unnecessary LOCK CMPXCHG and subsequent TLB flush.
If a read fault races with a write fault, fast GUP fails for any reason
when trying to "promote" the read fault to a writable mapping, and KVM
resolves the write fault first, then KVM will end up trying to install a
read-only SPTE (for a !map_writable fault) overtop a writable SPTE.
Note, it's not entirely clear why fast GUP fails, or if that's even how
KVM ends up with a !map_writable fault with a writable SPTE. If something
else is going awry, e.g. due to a bug in mmu_notifiers, then treating read
faults as spurious in this scenario could effectively mask the underlying
problem.
However, retrying the faulting access instead of overwriting an existing
SPTE is functionally correct and desirable irrespective of the WARN, and
fast GUP _can_ legitimately fail with a writable VMA, e.g. if the Accessed
bit in primary MMU's PTE is toggled and causes a PTE value mismatch. The
WARN was also recently added, specifically to track down scenarios where
KVM is unnecessarily overwrites SPTEs, i.e. treating the fault as spurious
doesn't regress KVM's bug-finding capabilities in any way. In short,
letting the WARN linger because there's a tiny chance it's due to a bug
elsewhere would be excessively paranoid.
Fixes: 1a175082b190 ("KVM: x86/mmu: WARN and flush if resolving a TDP MMU fault clears MMU-writable")
Reported-by: Lei Yang <leiyang@redhat.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219588
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218213611.3181643-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull misc fixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 19 are MM and 6 are non-MM.
The usual bunch of singletons and doubletons - please see the relevant
changelogs for details"
* tag 'mm-hotfixes-stable-2024-12-21-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm: huge_memory: handle strsep not finding delimiter
alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUG
alloc_tag: fix module allocation tags populated area calculation
mm/codetag: clear tags before swap
mm/vmstat: fix a W=1 clang compiler warning
mm: convert partially_mapped set/clear operations to be atomic
nilfs2: fix buffer head leaks in calls to truncate_inode_pages()
vmalloc: fix accounting with i915
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
fork: avoid inappropriate uprobe access to invalid mm
nilfs2: prevent use of deleted inode
zram: fix uninitialized ZRAM not releasing backing device
zram: refuse to use zero sized block device as backing device
mm: use clear_user_(high)page() for arch with special user folio handling
mm: introduce cpu_icache_is_aliasing() across all architectures
mm: add RCU annotation to pte_offset_map(_lock)
mm: correctly reference merged VMA
mm: use aligned address in copy_user_gigantic_page()
mm: use aligned address in clear_gigantic_page()
mm: shmem: fix ShmemHugePages at swapout
...
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.13, please pull the following:
- Willow corrects the L2 cache line size on the Raspberry Pi 5 (2712) to
the correct value of 64 bytes
* tag 'arm-soc/for-6.13/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
Link: https://lore.kernel.org/r/20241217190547.868744-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
of_irq_parse_one() may use uninitialized variable @addr_len as shown below:
// @addr_len is uninitialized
int addr_len;
// This operation does not touch @addr_len if it fails.
addr = of_get_property(device, "reg", &addr_len);
// Use uninitialized @addr_len if the operation fails.
if (addr_len > sizeof(addr_buf))
addr_len = sizeof(addr_buf);
// Check the operation result here.
if (addr)
memcpy(addr_buf, addr, addr_len);
Fix by initializing @addr_len before the operation.
Fixes: b739dffa5d57 ("of/irq: Prevent device address out-of-bounds read in interrupt map walk")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241209-of_irq_fix-v1-4-782f1419c8a1@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-ID: <20241217070539.2433-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop KVM's arbitrary behavior of making DE_CFG.LFENCE_SERIALIZE read-only
for the guest, as rejecting writes can lead to guest crashes, e.g. Windows
in particular doesn't gracefully handle unexpected #GPs on the WRMSR, and
nothing in the AMD manuals suggests that LFENCE_SERIALIZE is read-only _if
it exists_.
KVM only allows LFENCE_SERIALIZE to be set, by the guest or host, if the
underlying CPU has X86_FEATURE_LFENCE_RDTSC, i.e. if LFENCE is guaranteed
to be serializing. So if the guest sets LFENCE_SERIALIZE, KVM will provide
the desired/correct behavior without any additional action (the guest's
value is never stuffed into hardware). And having LFENCE be serializing
even when it's not _required_ to be is a-ok from a functional perspective.
Fixes: 74a0e79df68a ("KVM: SVM: Disallow guest from changing userspace's MSR_AMD64_DE_CFG value")
Fixes: d1d93fa90f1a ("KVM: SVM: Add MSR-based feature support for serializing LFENCE")
Reported-by: Simon Pilkington <simonp.git@mailbox.org>
Closes: https://lore.kernel.org/all/52914da7-a97b-45ad-86a0-affdf8266c61@mailbox.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20241211172952.1477605-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
My tests run an allyesconfig build and it failed with the following errors:
LD [M] samples/kfifo/dma-example.ko
ld.lld: error: undefined symbol: nec7210_board_reset
ld.lld: error: undefined symbol: nec7210_read
ld.lld: error: undefined symbol: nec7210_write
It appears that some modules call the function nec7210_board_reset()
that is defined in nec7210.c. In an allyesconfig build, these other
modules are built in. But the file that holds nec7210_board_reset()
has:
obj-m += nec7210.o
Where that "-m" means it only gets built as a module. With the other
modules built in, they have no access to nec7210_board_reset() and the build
fails.
This isn't the only function. After fixing that one, I hit another:
ld.lld: error: undefined symbol: push_gpib_event
ld.lld: error: undefined symbol: gpib_match_device_path
Where push_gpib_event() was also used outside of the file it was defined
in, and that file too only was built as a module.
Since the directory that nec7210.c is only traversed when
CONFIG_GPIB_NEC7210 is set, and the directory with gpib_common.c is only
traversed when CONFIG_GPIB_COMMON is set, use those configs as the
option to build those modules. When it is an allyesconfig, then they
will both be built in and their functions will be available to the other
modules that are also built in.
Fixes: 3ba84ac69b53e ("staging: gpib: Add nec7210 GPIB chip driver")
Fixes: 9dde4559e9395 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
split_huge_pages_write() does not handle the case where strsep finds no
delimiter in the given string and sets the input buffer to NULL, which
allows this reproducer to trigger a protection fault.
Link: https://lkml.kernel.org/r/20241216042752.257090-2-leocstone@gmail.com
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reported-by: syzbot+8a3da2f1bbf59227c289@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a3da2f1bbf59227c289
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
RISC-V soc driver fixes for v6.13-rc4
A single fix for the Auto Update driver, where a mistake in array
indexing (accessing as a u32 rather than a u8) caused the driver to read
the wrong feature disable bits.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
Link: https://lore.kernel.org/r/20241218-suffrage-unfazed-fa0113072a42@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Set the cache-line-size parameter of the L2 cache for each core to the
correct value of 64 bytes.
Previously, the L2 cache line size was incorrectly set to 128 bytes
for the Broadcom BCM2712. This causes validation tests for the
Performance Application Programming Interface (PAPI) tool to fail as
they depend on sysfs accurately reporting cache line sizes.
The correct value of 64 bytes is stated in the official documentation of
the ARM Cortex A-72, which is linked in the comments of
arm64/boot/dts/broadcom/bcm2712.dtsi as the source for cache-line-size.
Fixes: faa3381267d0 ("arm64: dts: broadcom: Add minimal support for Raspberry Pi 5")
Signed-off-by: Willow Cunningham <willow.e.cunningham@maine.edu>
Link: https://lore.kernel.org/r/20241007212954.214724-1-willow.e.cunningham@maine.edu
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
On a malformed interrupt-map property which is shorter than expected by
1 cell, we may read bogus data past the end of the property instead of
returning an error in of_irq_parse_imap_parent().
Decrement the remaining length when skipping over the interrupt parent
phandle cell.
Fixes: 935df1bd40d4 ("of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241209-of_irq_fix-v1-1-782f1419c8a1@quicinc.com
[rh: reword commit msg]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit
hypercall when completing said hypercall. For guests with protected state,
e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit
mode as the vCPU state needed to detect 64-bit mode is unavailable.
Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE
hypercall via VMGEXIT trips the WARN:
------------[ cut here ]------------
WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm]
Modules linked in: kvm_amd kvm ... [last unloaded: kvm]
CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470
Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024
RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm]
kvm_vcpu_ioctl+0x54f/0x630 [kvm]
__se_sys_ioctl+0x6b/0xc0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: b5aead0064f3 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state")
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20241128004344.4072099-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull Kbuild fixes from Masahiro Yamada:
- Remove stale code in usr/include/headers_check.pl
- Fix issues in the user-mode-linux Debian package
- Fix false-positive "export twice" errors in modpost
* tag 'kbuild-fixes-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: distinguish same module paths from different dump files
kbuild: deb-pkg: Do not install maint scripts for arch 'um'
kbuild: deb-pkg: add debarch for ARCH=um
kbuild: Drop support for include/asm-<arch> in headers_check.pl
It was recently noticed that set_codetag_empty() might be used not only to
mark NULL alloctag references as empty to avoid warnings but also to reset
valid tags (in clear_page_tag_ref()). Since set_codetag_empty() is
defined as NOOP for CONFIG_MEM_ALLOC_PROFILING_DEBUG=n, such use of
set_codetag_empty() leads to subtle bugs. Fix set_codetag_empty() for
CONFIG_MEM_ALLOC_PROFILING_DEBUG=n to reset the tag reference.
Link: https://lkml.kernel.org/r/20241130001423.1114965-2-surenb@google.com
Fixes: a8fc28dad6d5 ("alloc_tag: introduce clear_page_tag_ref() helper function")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Arm FF-A fix for v6.13
A single fix to address a possible race around setting ffa_dev->properties
in ffa_device_register() by updating ffa_device_register() to take all
the partition information received from the firmware and updating the
struct ffa_device accordingly before registering the device to the
bus/driver model in the kernel.
* tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
Link: https://lore.kernel.org/r/20241210101113.3232602-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To verify that Auto Update is possible, the mpfs_auto_update_state()
function performs a "Query Security Service Request" to the system
controller.
Previously, the check was performed on the first element of the
response message, which was accessed using a 32-bit pointer. This
caused the bitwise operation to reference incorrect data, as the
response should be inspected at the byte level. Fixed this by casting
the response to a u8 * pointer, ensuring the check correctly inspects
the appropriate byte of the response message.
Additionally, rename "UL_Auto Update" to "UL_IAP" to match the
PolarFire Family System Services User Guide.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
__of_get_dma_parent() returns OF device node @args.np, but the node's
refcount is increased twice, by both of_parse_phandle_with_args() and
of_node_get(), so causes refcount leakage for the node.
Fix by directly returning the node got by of_parse_phandle_with_args().
Fixes: f83a6e5dea6c ("of: address: Add support for the parent DMA bus")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241206-of_core_fix-v1-4-dc28ed56bec3@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull ARC fixes from Vineet Gupta:
- Sundry build and misc fixes
* tag 'arc-6.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: build: Try to guess GCC variant of cross compiler
ARC: bpf: Correct conditional check in 'check_jmp_32'
ARC: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
ARC: build: Use __force to suppress per-CPU cmpxchg warnings
ARC: fix reference of dependency for PAE40 config
ARC: build: disallow invalid PAE40 + 4K page config
arc: rename aux.h to arc_aux.h
On SNP-enabled system, VMRUN marks AVIC Backing Page as in-use while
the guest is running for both secure and non-secure guest. Any hypervisor
write to the in-use vCPU's AVIC backing page (e.g. to inject an interrupt)
will generate unexpected #PF in the host.
Currently, attempt to run AVIC guest would result in the following error:
BUG: unable to handle page fault for address: ff3a442e549cc270
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD b6ee01067 P4D b6ee02067 PUD 10096d063 PMD 11c540063 PTE 80000001149cc163
SEV-SNP: PFN 0x1149cc unassigned, dumping non-zero entries in 2M PFN region: [0x114800 - 0x114a00]
...
Newer AMD system is enhanced to allow hypervisor to modify the backing page
for non-secure guest on SNP-enabled system. This enhancement is available
when the CPUID Fn8000_001F_EAX bit 30 is set (HvInUseWrAllowed).
This table describes AVIC support matrix w.r.t. SNP enablement:
| Non-SNP system | SNP system
-----------------------------------------------------
Non-SNP guest | AVIC Activate | AVIC Activate iff
| | HvInuseWrAllowed=1
-----------------------------------------------------
SNP guest | N/A | Secure AVIC
Therefore, check and disable AVIC in kvm_amd driver when the feature is not
available on SNP-enabled system.
See the AMD64 Architecture Programmer’s Manual (APM) Volume 2 for detail.
(https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/
programmer-references/40332.pdf)
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20241104075845.7583-1-suravee.suthikulpanit@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull BPF fixes from Daniel Borkmann:
- Fix inlining of bpf_get_smp_processor_id helper for !CONFIG_SMP
systems (Andrea Righi)
- Fix BPF USDT selftests helper code to use asm constraint "m" for
LoongArch (Tiezhu Yang)
- Fix BPF selftest compilation error in get_uprobe_offset when
PROCMAP_QUERY is not defined (Jerome Marchand)
- Fix BPF bpf_skb_change_tail helper when used in context of BPF
sockmap to handle negative skb header offsets (Cong Wang)
- Several fixes to BPF sockmap code, among others, in the area of
socket buffer accounting (Levi Zim, Zijian Zhang, Cong Wang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test bpf_skb_change_tail() in TC ingress
selftests/bpf: Introduce socket_helpers.h for TC tests
selftests/bpf: Add a BPF selftest for bpf_skb_change_tail()
bpf: Check negative offsets in __bpf_skb_min_len()
tcp_bpf: Fix copied value in tcp_bpf_sendmsg
skmsg: Return copied bytes in sk_msg_memcopy_from_iter
tcp_bpf: Add sk_rmem_alloc related logic for tcp_bpf ingress redirection
tcp_bpf: Charge receive socket buffer in bpf_tcp_ingress()
selftests/bpf: Fix compilation error in get_uprobe_offset()
selftests/bpf: Use asm constraint "m" for LoongArch
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
Since commit 13b25489b6f8 ("kbuild: change working directory to external
module directory with M="), module paths are always relative to the top
of the external module tree.
The module paths recorded in Module.symvers are no longer globally unique
when they are passed via KBUILD_EXTRA_SYMBOLS for building other external
modules, which may result in false-positive "exported twice" errors.
Such errors should not occur because external modules should be able to
override in-tree modules.
To address this, record the dump file path in struct module and check it
when searching for a module.
Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/eb21a546-a19c-40df-b821-bbba80f19a3d@nvidia.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
vm_module_tags_populate() calculation of the populated area assumes that
area starts at a page boundary and therefore when new pages are allocation,
the end of the area is page-aligned as well. If the start of the area is
not page-aligned then allocating a page and incrementing the end of the
area by PAGE_SIZE leads to an area at the end but within the area boundary
which is not populated. Accessing this are will lead to a kernel panic.
Fix the calculation by down-aligning the start of the area and using that
as the location allocated pages are mapped to.
[gehao@kylinos.cn: fix vm_module_tags_populate's KASAN poisoning logic]
Link: https://lkml.kernel.org/r/20241205170528.81000-1-hao.ge@linux.dev
[gehao@kylinos.cn: fix panic when CONFIG_KASAN enabled and CONFIG_KASAN_VMALLOC not enabled]
Link: https://lkml.kernel.org/r/20241212072126.134572-1-hao.ge@linux.dev
Link: https://lkml.kernel.org/r/20241130001423.1114965-1-surenb@google.com
Fixes: 0f9b685626da ("alloc_tag: populate memory for module tags as needed")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202411132111.6a221562-lkp@intel.com
Acked-by: Yu Zhao <yuzhao@google.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Arm SCMI fix for v6.13
Fix for the build issue in the ASoC driver with the SCMI support by
enforcing the link-time dependency if IMX_SCMI_MISC_DRV is a loadable
module but not if that is disabled.
* tag 'scmi-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix i.MX build dependency
Link: https://lore.kernel.org/r/20241205114348.708618-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, ffa_dev->properties is set after the ffa_device_register()
call return in ffa_setup_partitions(). This could potentially result in
a race where the partition's properties is accessed while probing
struct ffa_device before it is set.
Update the ffa_device_register() to receive ffa_partition_info so all
the data from the partition information received from the firmware can
be updated into the struct ffa_device before the calling device_register()
in ffa_device_register().
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
The current code uses some 'goto put;' to cancel the parsing operation
and can lead to a return code value of 0 even on error cases.
Indeed, some goto calls are done from a loop without setting the ret
value explicitly before the goto call and so the ret value can be set to
0 due to operation done in previous loop iteration. For instance match
can be set to 0 in the previous loop iteration (leading to a new
iteration) but ret can also be set to 0 it the of_property_read_u32()
call succeed. In that case if no match are found or if an error is
detected the new iteration, the return value can be wrongly 0.
Avoid those cases setting the ret value explicitly before the goto
calls.
Fixes: bd6f2fd5a1d5 ("of: Support parsing phandle argument lists through a nexus node")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241202165819.158681-1-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
ARC GCC compiler is packaged starting from Fedora 39i and the GCC
variant of cross compile tools has arc-linux-gnu- prefix and not
arc-linux-. This is causing that CROSS_COMPILE variable is left unset.
This change allows builds without need to supply CROSS_COMPILE argument
if distro package is used.
Before this change:
$ make -j 128 ARCH=arc W=1 drivers/infiniband/hw/mlx4/
gcc: warning: ‘-mcpu=’ is deprecated; use ‘-mtune=’ or ‘-march=’ instead
gcc: error: unrecognized command-line option ‘-mmedium-calls’
gcc: error: unrecognized command-line option ‘-mlock’
gcc: error: unrecognized command-line option ‘-munaligned-access’
[1] https://packages.fedoraproject.org/pkgs/cross-gcc/gcc-arc-linux-gnu/index.html
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Pull vfs fixes from Christian Brauner:
- Fix a few iomap bugs
- Fix a wrong argument in backing file callback
- Fix security mount option retrieval in statmount()
- Cleanup how statmount() handles unescaped options
- Add a missing inode_owner_or_capable() check for setting write hints
- Clear the return value in read_kcore_iter() after a successful
iov_iter_zero()
- Fix a mount_setattr() selftest
- Fix function signature in mount api documentation
- Remove duplicate include header in the fscache code
* tag 'vfs-6.13-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/backing_file: fix wrong argument in callback
fs_parser: update mount_api doc to match function signature
fs: require inode_owner_or_capable for F_SET_RW_HINT
fs/proc/kcore.c: Clear ret value in read_kcore_iter after successful iov_iter_zero
statmount: fix security option retrieval
statmount: clean up unescaped option handling
fscache: Remove duplicate included header
iomap: elide flush from partial eof zero range
iomap: lift zeroed mapping handling into iomap_zero_range()
iomap: reset per-iter state on non-error iter advances
iomap: warn on zero range of a post-eof folio
selftests/mount_setattr: Fix failures on 64K PAGE_SIZE kernels
Pull media fixes from Mauro Carvalho Chehab:
- fix a clang build issue with mediatec vcodec
- add missing variable initialization to dib3000mb write function
* tag 'media/v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
Similarly to the previous test, we also need a test case to cover
positive offsets as well, TC is an excellent hook for this.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-5-xiyou.wangcong@gmail.com
Stop installing Debian maintainer scripts when building a
user-mode-linux Debian package.
Debian maintainer scripts are used for e.g. requesting rebuilds of
initrd, rebuilding DKMS modules and updating of grub configuration. As
all of this is not relevant for UML but also may lead to failures while
processing the kernel hooks, do no more install maintainer scripts for
the UML package.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_MEM_ALLOC_PROFILING_DEBUG is set, kernel WARN would be
triggered when calling __alloc_tag_ref_set() during swap:
alloc_tag was not cleared (got tag for mm/filemap.c:1951)
WARNING: CPU: 0 PID: 816 at ./include/linux/alloc_tag.h...
Clear code tags before swap can fix the warning. And this patch also fix
a potential invalid address dereference in alloc_tag_add_check() when
CONFIG_MEM_ALLOC_PROFILING_DEBUG is set and ref->ct is CODETAG_EMPTY,
which is defined as ((void *)1).
Link: https://lkml.kernel.org/r/20241213013332.89910-1-00107082@163.com
Fixes: 51f43d5d82ed ("mm/codetag: swap tags when migrate pages")
Signed-off-by: David Wang <00107082@163.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202412112227.df61ebb-lkp@intel.com
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Armv8 Juno fix for v6.13
Just a single fix updating the PCIe bus address range to accommodate
the full ECAM window of 256MB available on most of the recent versions
of RevC FVP models.
* tag 'juno-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fvp: Update PCIe bus-range property
Link: https://lore.kernel.org/r/20241205114302.708433-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The newly added SCMI vendor driver references functions in the
protocol driver but needs a Kconfig dependency to ensure it can link,
essentially the Kconfig dependency needs to be reversed to match the
link time dependency:
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write':
| fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set'
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read':
| fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get'
This however only works after changing the dependency in the SND_SOC_FSL_MQS
driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a
driver it depends on. This is generally a bad idea, so the best solution
is to change that into a dependency.
To allow the ASoC driver to keep building with the SCMI support, this
needs to be an optional dependency that enforces the link-time
dependency if IMX_SCMI_MISC_DRV is a loadable module but not
depend on it if that is disabled.
Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Fixes: 101c9023594a ("ASoC: fsl_mqs: Support accessing registers by scmi interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Message-Id: <20241115230555.2435004-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
Commit 157ce8f381ef ("i2c: Introduce OF component probe function") adds the
header file include/linux/i2c-of-prober.h and a corresponding file entry in
the newly added MAINTAINERS section I2C OF COMPONENT PROBER. This file
entry unfortunately has a typo.
Fortunately, ./scripts/get_maintainer.pl --self-test=patterns detects this
broken reference.
Fix the typo in this file entry in the I2C OF COMPONENT PROBER section.
Fixes: 157ce8f381ef ("i2c: Introduce OF component probe function")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The example erroneously has "compress" property rather than the
documented "compression" property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241113225632.1783241-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull i2c fixes from Wolfram Sang:
"i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was
missing a sentinel, and RIIC was missing rounding up"
* tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: riic: Always round-up when calculating bus period
i2c: nomadik: Add missing sentinel to match table
i2c: pnx: Fix timeout in wait functions
esre_attribute::store() is not needed since commit af97a77bc01c (efi:
Move some sysfs files to be read-only by root). Drop it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The original code checks 'if (ARC_CC_AL)', which is always true since
ARC_CC_AL is a constant. This makes the check redundant and likely
obscures the intention of verifying whether the jump is conditional.
Updates the code to check cond == ARC_CC_AL instead, reflecting the intent
to differentiate conditional from unconditional jumps.
Suggested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Shahab Vahedi <list+bpf@vahedi.org>
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Pull deny_write_access revert from Christian Brauner:
"It turns out that the mold linker relies on the deny_write_access()
mechanism for executables.
The mold linker tries to open a file for writing and if ETXTBSY is
returned mold falls back to creating a new file"
* tag 'vfs-6.13.exec.deny_write_access.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "fs: don't block i_writecount during exec"
Bring in an overlayfs fix for v6.13-rc1 that fixes a bug introduced by
the overlayfs changes merged for v6.13.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]
This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.
Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull socket helpers out of sockmap_helpers.h so that they can be reused
for TC tests as well. This prepares for the next patch.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-4-xiyou.wangcong@gmail.com
'make ARCH=um bindeb-pkg' shows the following warning.
$ make ARCH=um bindeb-pkg
[snip]
GEN debian
** ** ** WARNING ** ** **
Your architecture doesn't have its equivalent
Debian userspace architecture defined!
Falling back to the current host architecture (amd64).
Please add support for um to ./scripts/package/mkdebian ...
This commit hard-codes i386/amd64 because UML is only supported for x86.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Fix the following clang compiler warning that is reported if the kernel is
built with W=1:
./include/linux/vmstat.h:518:36: error: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Werror,-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
Link: https://lkml.kernel.org/r/20241212213126.1269116-1-bvanassche@acm.org
Fixes: 9d7ea9a297e6 ("mm/vmstat: add helpers to get vmstat item names for each enum type")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These days, the Fixed Virtual Platforms(FVP) Base RevC model supports
more PCI devices. Update the max bus number so that Linux can enumerate
them correctly. Without this, the kernel throws the below error while
booting with the default hierarchy
| pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
| pci_bus 0000:02: busn_res: can not insert [bus 02-01] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:02: busn_res: [bus 02-01] end is updated to 02
| pci_bus 0000:02: busn_res: can not insert [bus 02] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:03: busn_res: can not insert [bus 03-01] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:03: busn_res: [bus 03-01] end is updated to 03
| pci_bus 0000:03: busn_res: can not insert [bus 03] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:04: busn_res: can not insert [bus 04-01] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:04: busn_res: [bus 04-01] end is updated to 04
| pci_bus 0000:04: busn_res: can not insert [bus 04] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci 0000:00:01.0: BAR 14: assigned [mem 0x50000000-0x500fffff]
| pci-host-generic 40000000.pci: ECAM at [mem 0x40000000-0x4fffffff]
| for [bus 00-01]
The change is using 0xff as max bus number because the ECAM window is
256MB in size. Below is the lspci output with and without the change:
without fix
===========
| 00:00.0 Host bridge: ARM Device 00ba (rev 01)
| 00:01.0 PCI bridge: ARM Device 0def
| 00:02.0 PCI bridge: ARM Device 0def
| 00:03.0 PCI bridge: ARM Device 0def
| 00:04.0 PCI bridge: ARM Device 0def
| 00:1e.0 Unassigned class [ff00]: ARM Device ff80
| 00:1e.1 Unassigned class [ff00]: ARM Device ff80
| 00:1f.0 SATA controller: Device 0abc:aced (rev 01)
| 01:00.0 SATA controller: Device 0abc:aced (rev 01)
with fix
========
| 00:00.0 Host bridge: ARM Device 00ba (rev 01)
| 00:01.0 PCI bridge: ARM Device 0def
| 00:02.0 PCI bridge: ARM Device 0def
| 00:03.0 PCI bridge: ARM Device 0def
| 00:04.0 PCI bridge: ARM Device 0def
| 00:1e.0 Unassigned class [ff00]: ARM Device ff80
| 00:1e.1 Unassigned class [ff00]: ARM Device ff80
| 00:1f.0 SATA controller: Device 0abc:aced (rev 01)
| 01:00.0 SATA controller: Device 0abc:aced (rev 01)
| 02:00.0 Unassigned class [ff00]: ARM Device ff80
| 02:00.4 Unassigned class [ff00]: ARM Device ff80
| 03:00.0 PCI bridge: ARM Device 0def
| 04:00.0 PCI bridge: ARM Device 0def
| 04:01.0 PCI bridge: ARM Device 0def
| 04:02.0 PCI bridge: ARM Device 0def
| 05:00.0 SATA controller: Device 0abc:aced (rev 01)
| 06:00.0 Unassigned class [ff00]: ARM Device ff80
| 06:00.7 Unassigned class [ff00]: ARM Device ff80
| 07:00.0 Unassigned class [ff00]: ARM Device ff80
| 07:00.3 Unassigned class [ff00]: ARM Device ff80
| 08:00.0 Unassigned class [ff00]: ARM Device ff80
| 08:00.1 Unassigned class [ff00]: ARM Device ff80
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Message-Id: <20241128152543.1821878-1-aneesh.kumar@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
Pull KVM x86 fixes from Paolo Bonzini:
- Disable AVIC on SNP-enabled systems that don't allow writes to the
virtual APIC page, as such hosts will hit unexpected RMP #PFs in the
host when running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to
determine if a guest with protected register state is in 64-bit mode
(KVM's ABI is to assume such guests only make hypercalls in 64-bit
mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix
a regression with Windows guests, and because KVM's read-only
behavior appears to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed
given the existing SPTE. This fixes a benign WARN (other than the
WARN itself) due to unexpectedly replacing a writable SPTE with a
read-only SPTE.
- Emit a warning when KVM is configured with ignore_msrs=1 and also to
hide the MSRs that the guest is looking for from the kernel logs.
ignore_msrs can trick guests into assuming that certain processor
features are present, and this in turn leads to bogus bug reports.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: let it be known that ignore_msrs is a bad idea
KVM: VMX: don't include '<linux/find.h>' directly
KVM: x86/mmu: Treat TDP MMU faults as spurious if access is already allowed
KVM: SVM: Allow guest writes to set MSR_AMD64_DE_CFG bits
KVM: x86: Play nice with protected guests in complete_hypercall_exit()
KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed feature
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
KVM x86 fixes for 6.13:
- Disable AVIC on SNP-enabled systems that don't allow writes to the virtual
APIC page, as such hosts will hit unexpected RMP #PFs in the host when
running VMs of any flavor.
- Fix a WARN in the hypercall completion path due to KVM trying to determine
if a guest with protected register state is in 64-bit mode (KVM's ABI is to
assume such guests only make hypercalls in 64-bit mode).
- Allow the guest to write to supported bits in MSR_AMD64_DE_CFG to fix a
regression with Windows guests, and because KVM's read-only behavior appears
to be entirely made up.
- Treat TDP MMU faults as spurious if the faulting access is allowed given the
existing SPTE. This fixes a benign WARN (other than the WARN itself) due to
unexpectedly replacing a writable SPTE with a read-only SPTE.
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
Google Juniper and other Chromebook platforms have a very old bootloader
which populates /firmware node without proper address/size-cells leading
to warnings:
Missing '#address-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Hardware name: Google juniper sku16 board (DT)
...
Missing '#size-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:133 of_bus_n_size_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Tainted: [W]=WARN
Hardware name: Google juniper sku16 board (DT)
These platform won't receive updated bootloader/firmware, so add an
exclusion for platforms with a "coreboot" compatible node. While this is
wider than necessary, that's the easiest fix and it doesn't doesn't
matter if we miss checking other platforms using coreboot.
We may revisit this later and address with a fixup to the DT itself.
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/Z0NUdoG17EwuCigT@sashalap/
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
When running KVM with ignore_msrs=1 and report_ignored_msrs=0, the user has
no clue that that the guest is being lied to. This may cause bug reports
such as https://gitlab.com/qemu-project/qemu/-/issues/2571, where enabling
a CPUID bit in QEMU caused Linux guests to try reading MSR_CU_DEF_ERR; and
being lied about the existence of MSR_CU_DEF_ERR caused the guest to assume
other things about the local APIC which were not true:
Sep 14 12:02:53 kernel: mce: [Firmware Bug]: Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.
Sep 14 12:02:53 kernel: unchecked MSR access error: RDMSR from 0x852 at rIP: 0xffffffffb548ffa7 (native_read_msr+0x7/0x40)
Sep 14 12:02:53 kernel: Call Trace:
...
Sep 14 12:02:53 kernel: native_apic_msr_read+0x20/0x30
Sep 14 12:02:53 kernel: setup_APIC_eilvt+0x47/0x110
Sep 14 12:02:53 kernel: mce_amd_feature_init+0x485/0x4e0
...
Sep 14 12:02:53 kernel: [Firmware Bug]: cpu 0, try to use APIC520 (LVT offset 2) for vector 0xf4, but the register is already in use for vector 0x0 on this cpu
Without reported_ignored_msrs=0 at least the host kernel log will contain
enough information to avoid going on a wild goose chase. But if reports
about individual MSR accesses are being silenced too, at least complain
loudly the first time a VM is started.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Treat slow-path TDP MMU faults as spurious if the access is allowed given
the existing SPTE to fix a benign warning (other than the WARN itself)
due to replacing a writable SPTE with a read-only SPTE, and to avoid the
unnecessary LOCK CMPXCHG and subsequent TLB flush.
If a read fault races with a write fault, fast GUP fails for any reason
when trying to "promote" the read fault to a writable mapping, and KVM
resolves the write fault first, then KVM will end up trying to install a
read-only SPTE (for a !map_writable fault) overtop a writable SPTE.
Note, it's not entirely clear why fast GUP fails, or if that's even how
KVM ends up with a !map_writable fault with a writable SPTE. If something
else is going awry, e.g. due to a bug in mmu_notifiers, then treating read
faults as spurious in this scenario could effectively mask the underlying
problem.
However, retrying the faulting access instead of overwriting an existing
SPTE is functionally correct and desirable irrespective of the WARN, and
fast GUP _can_ legitimately fail with a writable VMA, e.g. if the Accessed
bit in primary MMU's PTE is toggled and causes a PTE value mismatch. The
WARN was also recently added, specifically to track down scenarios where
KVM is unnecessarily overwrites SPTEs, i.e. treating the fault as spurious
doesn't regress KVM's bug-finding capabilities in any way. In short,
letting the WARN linger because there's a tiny chance it's due to a bug
elsewhere would be excessively paranoid.
Fixes: 1a175082b190 ("KVM: x86/mmu: WARN and flush if resolving a TDP MMU fault clears MMU-writable")
Reported-by: Lei Yang <leiyang@redhat.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219588
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218213611.3181643-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull misc fixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 19 are MM and 6 are non-MM.
The usual bunch of singletons and doubletons - please see the relevant
changelogs for details"
* tag 'mm-hotfixes-stable-2024-12-21-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm: huge_memory: handle strsep not finding delimiter
alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUG
alloc_tag: fix module allocation tags populated area calculation
mm/codetag: clear tags before swap
mm/vmstat: fix a W=1 clang compiler warning
mm: convert partially_mapped set/clear operations to be atomic
nilfs2: fix buffer head leaks in calls to truncate_inode_pages()
vmalloc: fix accounting with i915
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
fork: avoid inappropriate uprobe access to invalid mm
nilfs2: prevent use of deleted inode
zram: fix uninitialized ZRAM not releasing backing device
zram: refuse to use zero sized block device as backing device
mm: use clear_user_(high)page() for arch with special user folio handling
mm: introduce cpu_icache_is_aliasing() across all architectures
mm: add RCU annotation to pte_offset_map(_lock)
mm: correctly reference merged VMA
mm: use aligned address in copy_user_gigantic_page()
mm: use aligned address in clear_gigantic_page()
mm: shmem: fix ShmemHugePages at swapout
...
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.13, please pull the following:
- Willow corrects the L2 cache line size on the Raspberry Pi 5 (2712) to
the correct value of 64 bytes
* tag 'arm-soc/for-6.13/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
Link: https://lore.kernel.org/r/20241217190547.868744-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
of_irq_parse_one() may use uninitialized variable @addr_len as shown below:
// @addr_len is uninitialized
int addr_len;
// This operation does not touch @addr_len if it fails.
addr = of_get_property(device, "reg", &addr_len);
// Use uninitialized @addr_len if the operation fails.
if (addr_len > sizeof(addr_buf))
addr_len = sizeof(addr_buf);
// Check the operation result here.
if (addr)
memcpy(addr_buf, addr, addr_len);
Fix by initializing @addr_len before the operation.
Fixes: b739dffa5d57 ("of/irq: Prevent device address out-of-bounds read in interrupt map walk")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241209-of_irq_fix-v1-4-782f1419c8a1@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The header clearly states that it does not want to be included directly,
only via '<linux/bitmap.h>'. Replace the include accordingly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-ID: <20241217070539.2433-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop KVM's arbitrary behavior of making DE_CFG.LFENCE_SERIALIZE read-only
for the guest, as rejecting writes can lead to guest crashes, e.g. Windows
in particular doesn't gracefully handle unexpected #GPs on the WRMSR, and
nothing in the AMD manuals suggests that LFENCE_SERIALIZE is read-only _if
it exists_.
KVM only allows LFENCE_SERIALIZE to be set, by the guest or host, if the
underlying CPU has X86_FEATURE_LFENCE_RDTSC, i.e. if LFENCE is guaranteed
to be serializing. So if the guest sets LFENCE_SERIALIZE, KVM will provide
the desired/correct behavior without any additional action (the guest's
value is never stuffed into hardware). And having LFENCE be serializing
even when it's not _required_ to be is a-ok from a functional perspective.
Fixes: 74a0e79df68a ("KVM: SVM: Disallow guest from changing userspace's MSR_AMD64_DE_CFG value")
Fixes: d1d93fa90f1a ("KVM: SVM: Add MSR-based feature support for serializing LFENCE")
Reported-by: Simon Pilkington <simonp.git@mailbox.org>
Closes: https://lore.kernel.org/all/52914da7-a97b-45ad-86a0-affdf8266c61@mailbox.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20241211172952.1477605-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
My tests run an allyesconfig build and it failed with the following errors:
LD [M] samples/kfifo/dma-example.ko
ld.lld: error: undefined symbol: nec7210_board_reset
ld.lld: error: undefined symbol: nec7210_read
ld.lld: error: undefined symbol: nec7210_write
It appears that some modules call the function nec7210_board_reset()
that is defined in nec7210.c. In an allyesconfig build, these other
modules are built in. But the file that holds nec7210_board_reset()
has:
obj-m += nec7210.o
Where that "-m" means it only gets built as a module. With the other
modules built in, they have no access to nec7210_board_reset() and the build
fails.
This isn't the only function. After fixing that one, I hit another:
ld.lld: error: undefined symbol: push_gpib_event
ld.lld: error: undefined symbol: gpib_match_device_path
Where push_gpib_event() was also used outside of the file it was defined
in, and that file too only was built as a module.
Since the directory that nec7210.c is only traversed when
CONFIG_GPIB_NEC7210 is set, and the directory with gpib_common.c is only
traversed when CONFIG_GPIB_COMMON is set, use those configs as the
option to build those modules. When it is an allyesconfig, then they
will both be built in and their functions will be available to the other
modules that are also built in.
Fixes: 3ba84ac69b53e ("staging: gpib: Add nec7210 GPIB chip driver")
Fixes: 9dde4559e9395 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
split_huge_pages_write() does not handle the case where strsep finds no
delimiter in the given string and sets the input buffer to NULL, which
allows this reproducer to trigger a protection fault.
Link: https://lkml.kernel.org/r/20241216042752.257090-2-leocstone@gmail.com
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reported-by: syzbot+8a3da2f1bbf59227c289@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a3da2f1bbf59227c289
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
RISC-V soc driver fixes for v6.13-rc4
A single fix for the Auto Update driver, where a mistake in array
indexing (accessing as a u32 rather than a u8) caused the driver to read
the wrong feature disable bits.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
Link: https://lore.kernel.org/r/20241218-suffrage-unfazed-fa0113072a42@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Set the cache-line-size parameter of the L2 cache for each core to the
correct value of 64 bytes.
Previously, the L2 cache line size was incorrectly set to 128 bytes
for the Broadcom BCM2712. This causes validation tests for the
Performance Application Programming Interface (PAPI) tool to fail as
they depend on sysfs accurately reporting cache line sizes.
The correct value of 64 bytes is stated in the official documentation of
the ARM Cortex A-72, which is linked in the comments of
arm64/boot/dts/broadcom/bcm2712.dtsi as the source for cache-line-size.
Fixes: faa3381267d0 ("arm64: dts: broadcom: Add minimal support for Raspberry Pi 5")
Signed-off-by: Willow Cunningham <willow.e.cunningham@maine.edu>
Link: https://lore.kernel.org/r/20241007212954.214724-1-willow.e.cunningham@maine.edu
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
On a malformed interrupt-map property which is shorter than expected by
1 cell, we may read bogus data past the end of the property instead of
returning an error in of_irq_parse_imap_parent().
Decrement the remaining length when skipping over the interrupt parent
phandle cell.
Fixes: 935df1bd40d4 ("of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241209-of_irq_fix-v1-1-782f1419c8a1@quicinc.com
[rh: reword commit msg]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit
hypercall when completing said hypercall. For guests with protected state,
e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit
mode as the vCPU state needed to detect 64-bit mode is unavailable.
Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE
hypercall via VMGEXIT trips the WARN:
------------[ cut here ]------------
WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm]
Modules linked in: kvm_amd kvm ... [last unloaded: kvm]
CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470
Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024
RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm]
kvm_vcpu_ioctl+0x54f/0x630 [kvm]
__se_sys_ioctl+0x6b/0xc0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: b5aead0064f3 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state")
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20241128004344.4072099-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull Kbuild fixes from Masahiro Yamada:
- Remove stale code in usr/include/headers_check.pl
- Fix issues in the user-mode-linux Debian package
- Fix false-positive "export twice" errors in modpost
* tag 'kbuild-fixes-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: distinguish same module paths from different dump files
kbuild: deb-pkg: Do not install maint scripts for arch 'um'
kbuild: deb-pkg: add debarch for ARCH=um
kbuild: Drop support for include/asm-<arch> in headers_check.pl
It was recently noticed that set_codetag_empty() might be used not only to
mark NULL alloctag references as empty to avoid warnings but also to reset
valid tags (in clear_page_tag_ref()). Since set_codetag_empty() is
defined as NOOP for CONFIG_MEM_ALLOC_PROFILING_DEBUG=n, such use of
set_codetag_empty() leads to subtle bugs. Fix set_codetag_empty() for
CONFIG_MEM_ALLOC_PROFILING_DEBUG=n to reset the tag reference.
Link: https://lkml.kernel.org/r/20241130001423.1114965-2-surenb@google.com
Fixes: a8fc28dad6d5 ("alloc_tag: introduce clear_page_tag_ref() helper function")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Arm FF-A fix for v6.13
A single fix to address a possible race around setting ffa_dev->properties
in ffa_device_register() by updating ffa_device_register() to take all
the partition information received from the firmware and updating the
struct ffa_device accordingly before registering the device to the
bus/driver model in the kernel.
* tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
Link: https://lore.kernel.org/r/20241210101113.3232602-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To verify that Auto Update is possible, the mpfs_auto_update_state()
function performs a "Query Security Service Request" to the system
controller.
Previously, the check was performed on the first element of the
response message, which was accessed using a 32-bit pointer. This
caused the bitwise operation to reference incorrect data, as the
response should be inspected at the byte level. Fixed this by casting
the response to a u8 * pointer, ensuring the check correctly inspects
the appropriate byte of the response message.
Additionally, rename "UL_Auto Update" to "UL_IAP" to match the
PolarFire Family System Services User Guide.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
__of_get_dma_parent() returns OF device node @args.np, but the node's
refcount is increased twice, by both of_parse_phandle_with_args() and
of_node_get(), so causes refcount leakage for the node.
Fix by directly returning the node got by of_parse_phandle_with_args().
Fixes: f83a6e5dea6c ("of: address: Add support for the parent DMA bus")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241206-of_core_fix-v1-4-dc28ed56bec3@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull ARC fixes from Vineet Gupta:
- Sundry build and misc fixes
* tag 'arc-6.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: build: Try to guess GCC variant of cross compiler
ARC: bpf: Correct conditional check in 'check_jmp_32'
ARC: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
ARC: build: Use __force to suppress per-CPU cmpxchg warnings
ARC: fix reference of dependency for PAE40 config
ARC: build: disallow invalid PAE40 + 4K page config
arc: rename aux.h to arc_aux.h
On SNP-enabled system, VMRUN marks AVIC Backing Page as in-use while
the guest is running for both secure and non-secure guest. Any hypervisor
write to the in-use vCPU's AVIC backing page (e.g. to inject an interrupt)
will generate unexpected #PF in the host.
Currently, attempt to run AVIC guest would result in the following error:
BUG: unable to handle page fault for address: ff3a442e549cc270
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD b6ee01067 P4D b6ee02067 PUD 10096d063 PMD 11c540063 PTE 80000001149cc163
SEV-SNP: PFN 0x1149cc unassigned, dumping non-zero entries in 2M PFN region: [0x114800 - 0x114a00]
...
Newer AMD system is enhanced to allow hypervisor to modify the backing page
for non-secure guest on SNP-enabled system. This enhancement is available
when the CPUID Fn8000_001F_EAX bit 30 is set (HvInUseWrAllowed).
This table describes AVIC support matrix w.r.t. SNP enablement:
| Non-SNP system | SNP system
-----------------------------------------------------
Non-SNP guest | AVIC Activate | AVIC Activate iff
| | HvInuseWrAllowed=1
-----------------------------------------------------
SNP guest | N/A | Secure AVIC
Therefore, check and disable AVIC in kvm_amd driver when the feature is not
available on SNP-enabled system.
See the AMD64 Architecture Programmer’s Manual (APM) Volume 2 for detail.
(https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/
programmer-references/40332.pdf)
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20241104075845.7583-1-suravee.suthikulpanit@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull BPF fixes from Daniel Borkmann:
- Fix inlining of bpf_get_smp_processor_id helper for !CONFIG_SMP
systems (Andrea Righi)
- Fix BPF USDT selftests helper code to use asm constraint "m" for
LoongArch (Tiezhu Yang)
- Fix BPF selftest compilation error in get_uprobe_offset when
PROCMAP_QUERY is not defined (Jerome Marchand)
- Fix BPF bpf_skb_change_tail helper when used in context of BPF
sockmap to handle negative skb header offsets (Cong Wang)
- Several fixes to BPF sockmap code, among others, in the area of
socket buffer accounting (Levi Zim, Zijian Zhang, Cong Wang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test bpf_skb_change_tail() in TC ingress
selftests/bpf: Introduce socket_helpers.h for TC tests
selftests/bpf: Add a BPF selftest for bpf_skb_change_tail()
bpf: Check negative offsets in __bpf_skb_min_len()
tcp_bpf: Fix copied value in tcp_bpf_sendmsg
skmsg: Return copied bytes in sk_msg_memcopy_from_iter
tcp_bpf: Add sk_rmem_alloc related logic for tcp_bpf ingress redirection
tcp_bpf: Charge receive socket buffer in bpf_tcp_ingress()
selftests/bpf: Fix compilation error in get_uprobe_offset()
selftests/bpf: Use asm constraint "m" for LoongArch
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
Since commit 13b25489b6f8 ("kbuild: change working directory to external
module directory with M="), module paths are always relative to the top
of the external module tree.
The module paths recorded in Module.symvers are no longer globally unique
when they are passed via KBUILD_EXTRA_SYMBOLS for building other external
modules, which may result in false-positive "exported twice" errors.
Such errors should not occur because external modules should be able to
override in-tree modules.
To address this, record the dump file path in struct module and check it
when searching for a module.
Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/eb21a546-a19c-40df-b821-bbba80f19a3d@nvidia.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
vm_module_tags_populate() calculation of the populated area assumes that
area starts at a page boundary and therefore when new pages are allocation,
the end of the area is page-aligned as well. If the start of the area is
not page-aligned then allocating a page and incrementing the end of the
area by PAGE_SIZE leads to an area at the end but within the area boundary
which is not populated. Accessing this are will lead to a kernel panic.
Fix the calculation by down-aligning the start of the area and using that
as the location allocated pages are mapped to.
[gehao@kylinos.cn: fix vm_module_tags_populate's KASAN poisoning logic]
Link: https://lkml.kernel.org/r/20241205170528.81000-1-hao.ge@linux.dev
[gehao@kylinos.cn: fix panic when CONFIG_KASAN enabled and CONFIG_KASAN_VMALLOC not enabled]
Link: https://lkml.kernel.org/r/20241212072126.134572-1-hao.ge@linux.dev
Link: https://lkml.kernel.org/r/20241130001423.1114965-1-surenb@google.com
Fixes: 0f9b685626da ("alloc_tag: populate memory for module tags as needed")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202411132111.6a221562-lkp@intel.com
Acked-by: Yu Zhao <yuzhao@google.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Arm SCMI fix for v6.13
Fix for the build issue in the ASoC driver with the SCMI support by
enforcing the link-time dependency if IMX_SCMI_MISC_DRV is a loadable
module but not if that is disabled.
* tag 'scmi-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix i.MX build dependency
Link: https://lore.kernel.org/r/20241205114348.708618-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, ffa_dev->properties is set after the ffa_device_register()
call return in ffa_setup_partitions(). This could potentially result in
a race where the partition's properties is accessed while probing
struct ffa_device before it is set.
Update the ffa_device_register() to receive ffa_partition_info so all
the data from the partition information received from the firmware can
be updated into the struct ffa_device before the calling device_register()
in ffa_device_register().
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
The current code uses some 'goto put;' to cancel the parsing operation
and can lead to a return code value of 0 even on error cases.
Indeed, some goto calls are done from a loop without setting the ret
value explicitly before the goto call and so the ret value can be set to
0 due to operation done in previous loop iteration. For instance match
can be set to 0 in the previous loop iteration (leading to a new
iteration) but ret can also be set to 0 it the of_property_read_u32()
call succeed. In that case if no match are found or if an error is
detected the new iteration, the return value can be wrongly 0.
Avoid those cases setting the ret value explicitly before the goto
calls.
Fixes: bd6f2fd5a1d5 ("of: Support parsing phandle argument lists through a nexus node")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241202165819.158681-1-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
ARC GCC compiler is packaged starting from Fedora 39i and the GCC
variant of cross compile tools has arc-linux-gnu- prefix and not
arc-linux-. This is causing that CROSS_COMPILE variable is left unset.
This change allows builds without need to supply CROSS_COMPILE argument
if distro package is used.
Before this change:
$ make -j 128 ARCH=arc W=1 drivers/infiniband/hw/mlx4/
gcc: warning: ‘-mcpu=’ is deprecated; use ‘-mtune=’ or ‘-march=’ instead
gcc: error: unrecognized command-line option ‘-mmedium-calls’
gcc: error: unrecognized command-line option ‘-mlock’
gcc: error: unrecognized command-line option ‘-munaligned-access’
[1] https://packages.fedoraproject.org/pkgs/cross-gcc/gcc-arc-linux-gnu/index.html
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Pull vfs fixes from Christian Brauner:
- Fix a few iomap bugs
- Fix a wrong argument in backing file callback
- Fix security mount option retrieval in statmount()
- Cleanup how statmount() handles unescaped options
- Add a missing inode_owner_or_capable() check for setting write hints
- Clear the return value in read_kcore_iter() after a successful
iov_iter_zero()
- Fix a mount_setattr() selftest
- Fix function signature in mount api documentation
- Remove duplicate include header in the fscache code
* tag 'vfs-6.13-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/backing_file: fix wrong argument in callback
fs_parser: update mount_api doc to match function signature
fs: require inode_owner_or_capable for F_SET_RW_HINT
fs/proc/kcore.c: Clear ret value in read_kcore_iter after successful iov_iter_zero
statmount: fix security option retrieval
statmount: clean up unescaped option handling
fscache: Remove duplicate included header
iomap: elide flush from partial eof zero range
iomap: lift zeroed mapping handling into iomap_zero_range()
iomap: reset per-iter state on non-error iter advances
iomap: warn on zero range of a post-eof folio
selftests/mount_setattr: Fix failures on 64K PAGE_SIZE kernels
Pull media fixes from Mauro Carvalho Chehab:
- fix a clang build issue with mediatec vcodec
- add missing variable initialization to dib3000mb write function
* tag 'media/v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
Similarly to the previous test, we also need a test case to cover
positive offsets as well, TC is an excellent hook for this.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-5-xiyou.wangcong@gmail.com
Stop installing Debian maintainer scripts when building a
user-mode-linux Debian package.
Debian maintainer scripts are used for e.g. requesting rebuilds of
initrd, rebuilding DKMS modules and updating of grub configuration. As
all of this is not relevant for UML but also may lead to failures while
processing the kernel hooks, do no more install maintainer scripts for
the UML package.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_MEM_ALLOC_PROFILING_DEBUG is set, kernel WARN would be
triggered when calling __alloc_tag_ref_set() during swap:
alloc_tag was not cleared (got tag for mm/filemap.c:1951)
WARNING: CPU: 0 PID: 816 at ./include/linux/alloc_tag.h...
Clear code tags before swap can fix the warning. And this patch also fix
a potential invalid address dereference in alloc_tag_add_check() when
CONFIG_MEM_ALLOC_PROFILING_DEBUG is set and ref->ct is CODETAG_EMPTY,
which is defined as ((void *)1).
Link: https://lkml.kernel.org/r/20241213013332.89910-1-00107082@163.com
Fixes: 51f43d5d82ed ("mm/codetag: swap tags when migrate pages")
Signed-off-by: David Wang <00107082@163.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202412112227.df61ebb-lkp@intel.com
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Armv8 Juno fix for v6.13
Just a single fix updating the PCIe bus address range to accommodate
the full ECAM window of 256MB available on most of the recent versions
of RevC FVP models.
* tag 'juno-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fvp: Update PCIe bus-range property
Link: https://lore.kernel.org/r/20241205114302.708433-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The newly added SCMI vendor driver references functions in the
protocol driver but needs a Kconfig dependency to ensure it can link,
essentially the Kconfig dependency needs to be reversed to match the
link time dependency:
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write':
| fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set'
| arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read':
| fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get'
This however only works after changing the dependency in the SND_SOC_FSL_MQS
driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a
driver it depends on. This is generally a bad idea, so the best solution
is to change that into a dependency.
To allow the ASoC driver to keep building with the SCMI support, this
needs to be an optional dependency that enforces the link-time
dependency if IMX_SCMI_MISC_DRV is a loadable module but not
depend on it if that is disabled.
Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Fixes: 101c9023594a ("ASoC: fsl_mqs: Support accessing registers by scmi interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Message-Id: <20241115230555.2435004-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
Commit 157ce8f381ef ("i2c: Introduce OF component probe function") adds the
header file include/linux/i2c-of-prober.h and a corresponding file entry in
the newly added MAINTAINERS section I2C OF COMPONENT PROBER. This file
entry unfortunately has a typo.
Fortunately, ./scripts/get_maintainer.pl --self-test=patterns detects this
broken reference.
Fix the typo in this file entry in the I2C OF COMPONENT PROBER section.
Fixes: 157ce8f381ef ("i2c: Introduce OF component probe function")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Pull i2c fixes from Wolfram Sang:
"i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was
missing a sentinel, and RIIC was missing rounding up"
* tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: riic: Always round-up when calculating bus period
i2c: nomadik: Add missing sentinel to match table
i2c: pnx: Fix timeout in wait functions
esre_attribute::store() is not needed since commit af97a77bc01c (efi:
Move some sysfs files to be read-only by root). Drop it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The original code checks 'if (ARC_CC_AL)', which is always true since
ARC_CC_AL is a constant. This makes the check redundant and likely
obscures the intention of verifying whether the jump is conditional.
Updates the code to check cond == ARC_CC_AL instead, reflecting the intent
to differentiate conditional from unconditional jumps.
Suggested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Shahab Vahedi <list+bpf@vahedi.org>
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Pull deny_write_access revert from Christian Brauner:
"It turns out that the mold linker relies on the deny_write_access()
mechanism for executables.
The mold linker tries to open a file for writing and if ETXTBSY is
returned mold falls back to creating a new file"
* tag 'vfs-6.13.exec.deny_write_access.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "fs: don't block i_writecount during exec"
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]
This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.
Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull socket helpers out of sockmap_helpers.h so that they can be reused
for TC tests as well. This prepares for the next patch.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-4-xiyou.wangcong@gmail.com
'make ARCH=um bindeb-pkg' shows the following warning.
$ make ARCH=um bindeb-pkg
[snip]
GEN debian
** ** ** WARNING ** ** **
Your architecture doesn't have its equivalent
Debian userspace architecture defined!
Falling back to the current host architecture (amd64).
Please add support for um to ./scripts/package/mkdebian ...
This commit hard-codes i386/amd64 because UML is only supported for x86.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Fix the following clang compiler warning that is reported if the kernel is
built with W=1:
./include/linux/vmstat.h:518:36: error: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Werror,-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
Link: https://lkml.kernel.org/r/20241212213126.1269116-1-bvanassche@acm.org
Fixes: 9d7ea9a297e6 ("mm/vmstat: add helpers to get vmstat item names for each enum type")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These days, the Fixed Virtual Platforms(FVP) Base RevC model supports
more PCI devices. Update the max bus number so that Linux can enumerate
them correctly. Without this, the kernel throws the below error while
booting with the default hierarchy
| pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
| pci_bus 0000:02: busn_res: can not insert [bus 02-01] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:02: busn_res: [bus 02-01] end is updated to 02
| pci_bus 0000:02: busn_res: can not insert [bus 02] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:03: busn_res: can not insert [bus 03-01] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:03: busn_res: [bus 03-01] end is updated to 03
| pci_bus 0000:03: busn_res: can not insert [bus 03] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:04: busn_res: can not insert [bus 04-01] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci_bus 0000:04: busn_res: [bus 04-01] end is updated to 04
| pci_bus 0000:04: busn_res: can not insert [bus 04] under
| [bus 00-01] (conflicts with (null) [bus 00-01])
| pci 0000:00:01.0: BAR 14: assigned [mem 0x50000000-0x500fffff]
| pci-host-generic 40000000.pci: ECAM at [mem 0x40000000-0x4fffffff]
| for [bus 00-01]
The change is using 0xff as max bus number because the ECAM window is
256MB in size. Below is the lspci output with and without the change:
without fix
===========
| 00:00.0 Host bridge: ARM Device 00ba (rev 01)
| 00:01.0 PCI bridge: ARM Device 0def
| 00:02.0 PCI bridge: ARM Device 0def
| 00:03.0 PCI bridge: ARM Device 0def
| 00:04.0 PCI bridge: ARM Device 0def
| 00:1e.0 Unassigned class [ff00]: ARM Device ff80
| 00:1e.1 Unassigned class [ff00]: ARM Device ff80
| 00:1f.0 SATA controller: Device 0abc:aced (rev 01)
| 01:00.0 SATA controller: Device 0abc:aced (rev 01)
with fix
========
| 00:00.0 Host bridge: ARM Device 00ba (rev 01)
| 00:01.0 PCI bridge: ARM Device 0def
| 00:02.0 PCI bridge: ARM Device 0def
| 00:03.0 PCI bridge: ARM Device 0def
| 00:04.0 PCI bridge: ARM Device 0def
| 00:1e.0 Unassigned class [ff00]: ARM Device ff80
| 00:1e.1 Unassigned class [ff00]: ARM Device ff80
| 00:1f.0 SATA controller: Device 0abc:aced (rev 01)
| 01:00.0 SATA controller: Device 0abc:aced (rev 01)
| 02:00.0 Unassigned class [ff00]: ARM Device ff80
| 02:00.4 Unassigned class [ff00]: ARM Device ff80
| 03:00.0 PCI bridge: ARM Device 0def
| 04:00.0 PCI bridge: ARM Device 0def
| 04:01.0 PCI bridge: ARM Device 0def
| 04:02.0 PCI bridge: ARM Device 0def
| 05:00.0 SATA controller: Device 0abc:aced (rev 01)
| 06:00.0 Unassigned class [ff00]: ARM Device ff80
| 06:00.7 Unassigned class [ff00]: ARM Device ff80
| 07:00.0 Unassigned class [ff00]: ARM Device ff80
| 07:00.3 Unassigned class [ff00]: ARM Device ff80
| 08:00.0 Unassigned class [ff00]: ARM Device ff80
| 08:00.1 Unassigned class [ff00]: ARM Device ff80
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Message-Id: <20241128152543.1821878-1-aneesh.kumar@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math