Pull smb client fixes from Steve French:
"Two fixes for Windows symlink handling"

* tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix creating native symlinks pointing to current or parent directory
cifs: Improve creating native symlinks pointing to directory

Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported problems for 6.12-rc3.
Include in here is:

- fix for yurex driver that was caused in -rc1

- build error fix for usbg network filesystem code

- onboard_usb_dev build fix

- dwc3 driver fixes for reported errors

- gadget driver fix

- new USB storage driver quirk

- xhci resume bugfix

All of these have been in linux-next for a while with no reported
issues"

* tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
net/9p/usbg: Fix build error
USB: yurex: kill needless initialization in yurex_read
Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant"
usb: xhci: Fix problem with xhci resume from suspend
usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
usb: dwc3: core: Stop processing of pending events if controller is halted
usb: dwc3: re-enable runtime PM after failed resume
usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip
usb: gadget: core: force synchronous registration

Calling 'ln -s . symlink' or 'ln -s .. symlink' creates symlink pointing to
some object name which ends with U+F029 unicode codepoint. This is because
trailing dot in the object name is replaced by non-ASCII unicode codepoint.

So Linux SMB client currently is not able to create native symlink pointing
to current or parent directory on Windows SMB server which can be read by
either on local Windows server or by any other SMB client which does not
implement compatible-reverse character replacement.

Fix this problem in cifsConvertToUTF16() function which is doing that
character replacement. Function comment already says that it does not need
to handle special cases '.' and '..', but after introduction of native
symlinks in reparse point form, this handling is needed.

Note that this change depends on the previous change
"cifs: Improve creating native symlinks pointing to directory".

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull driver core fixes from Greg KH:
"Here is a single driver core fix, and a .mailmap update.

The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.)
So this change fixes it up as the from_raw binding came in in -rc1.

The other change is a .mailmap update.

Both have been in linux-next for a while with no reported issues"

* tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mailmap: update mail for Fiona Behrens
rust: device: change the from_raw() function

When CONFIG_NET_9P_USBG=y but CONFIG_USB_LIBCOMPOSITE=m and
CONFIG_CONFIGFS_FS=m, the following build error occurs:

riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_free_func':
trans_usbg.c:(.text+0x124): undefined reference to `usb_free_all_descriptors'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_rx_complete':
trans_usbg.c:(.text+0x2d8): undefined reference to `usb_interface_id'
riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x2f6): undefined reference to `usb_string_id'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_func_bind':
trans_usbg.c:(.text+0x31c): undefined reference to `usb_ep_autoconfig'
riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x336): undefined reference to `usb_ep_autoconfig'
riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x378): undefined reference to `usb_assign_descriptors'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `f_usb9pfs_opts_buflen_store':
trans_usbg.c:(.text+0x49e): undefined reference to `usb_put_function_instance'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_alloc_instance':
trans_usbg.c:(.text+0x5fe): undefined reference to `config_group_init_type_name'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_alloc':
trans_usbg.c:(.text+0x7aa): undefined reference to `config_ep_by_speed'
riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x7ea): undefined reference to `config_ep_by_speed'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_set_alt':
trans_usbg.c:(.text+0x828): undefined reference to `alloc_ep_req'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_modexit':
trans_usbg.c:(.exit.text+0x10): undefined reference to `usb_function_unregister'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_modinit':
trans_usbg.c:(.init.text+0x1e): undefined reference to `usb_function_register'

Select the config for NET_9P_USBG to fix it.

Fixes: a3be076dc174 ("net/9p/usbg: Add new usb gadget function transport")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Tested-by: Kexy Biscuit <kexybiscuit@aosc.io>
Link: https://lore.kernel.org/r/20240930081520.2371424-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB protocol for native symlinks distinguish between symlink to directory
and symlink to file. These two symlink types cannot be exchanged, which
means that symlink of file type pointing to directory cannot be resolved at
all (and vice-versa).

Windows follows this rule for local filesystems (NTFS) and also for SMB.

Linux SMB client currenly creates all native symlinks of file type. Which
means that Windows (and some other SMB clients) cannot resolve symlinks
pointing to directory created by Linux SMB client.

As Linux system does not distinguish between directory and file symlinks,
its API does not provide enough information for Linux SMB client during
creating of native symlinks.

Add some heuristic into the Linux SMB client for choosing the correct
symlink type during symlink creation. Check if the symlink target location
ends with slash, or last path component is dot or dot-dot, and check if the
target location on SMB share exists and is a directory. If at least one
condition is truth then create a new SMB symlink of directory type.
Otherwise create it as file type symlink.

This change improves interoperability with Windows systems. Windows systems
would be able to resolve more SMB symlinks created by Linux SMB client
which points to existing directory.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull powerpc fix from Michael Ellerman:

- Fix crash in memcpy on 8xx due to dcbz workaround since recent
changes

Thanks to Christophe Leroy.

* tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Fix kernel DTLB miss on dcbz

Remove old mails of Fiona Behrens

Signed-off-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20240922175729.233070-1-me@kloenk.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This prevented the compiler from catching the patch
that broke the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20241007094004.242122-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_fc: Allow setting rport state to current state
scsi: wd33c93: Don't use stale scsi_pointer value
scsi: fnic: Move flush_work initialization out of if block
scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()

Following OOPS is encountered while loading test_bpf module
on powerpc 8xx:

[ 218.835567] BUG: Unable to handle kernel data access on write at 0xcb000000
[ 218.842473] Faulting instruction address: 0xc0017a80
[ 218.847451] Oops: Kernel access of bad area, sig: 11 [#1]
[ 218.852854] BE PAGE_SIZE=16K PREEMPT CMPC885
[ 218.857207] SAF3000 DIE NOTIFICATION
[ 218.860713] Modules linked in: test_bpf(+) test_module
[ 218.865867] CPU: 0 UID: 0 PID: 527 Comm: insmod Not tainted 6.11.0-s3k-dev-09856-g3de3d71ae2e6-dirty #1280
[ 218.875546] Hardware name: MIAE 8xx 0x500000 CMPC885
[ 218.880521] NIP: c0017a80 LR: beab859c CTR: 000101d4
[ 218.885584] REGS: cac2bc90 TRAP: 0300 Not tainted (6.11.0-s3k-dev-09856-g3de3d71ae2e6-dirty)
[ 218.894308] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 55005555 XER: a0007100
[ 218.901290] DAR: cb000000 DSISR: c2000000
[ 218.901290] GPR00: 000185d1 cac2bd50 c21b9580 caf7c030 c3883fcc 00000008 cafffffc 00000000
[ 218.901290] GPR08: 00040000 18300000 20000000 00000004 99005555 100d815e ca669d08 00000369
[ 218.901290] GPR16: ca730000 00000000 ca2c004c 00000000 00000000 0000035d 00000311 00000369
[ 218.901290] GPR24: ca732240 00000001 00030ba3 c3800000 00000000 00185d48 caf7c000 ca2c004c
[ 218.941087] NIP [c0017a80] memcpy+0x88/0xec
[ 218.945277] LR [beab859c] test_bpf_init+0x22c/0x3c90 [test_bpf]
[ 218.951476] Call Trace:
[ 218.953916] [cac2bd50] [beab8570] test_bpf_init+0x200/0x3c90 [test_bpf] (unreliable)
[ 218.962034] [cac2bde0] [c0004c04] do_one_initcall+0x4c/0x1fc
[ 218.967706] [cac2be40] [c00a2ec4] do_init_module+0x68/0x360
[ 218.973292] [cac2be60] [c00a5194] init_module_from_file+0x8c/0xc0
[ 218.979401] [cac2bed0] [c00a5568] sys_finit_module+0x250/0x3f0
[ 218.985248] [cac2bf20] [c000e390] system_call_exception+0x8c/0x15c
[ 218.991444] [cac2bf30] [c00120a8] ret_from_syscall+0x0/0x28

This happens in the main loop of memcpy()

==> c0017a80: 7c 0b 37 ec dcbz r11,r6
c0017a84: 80 e4 00 04 lwz r7,4(r4)
c0017a88: 81 04 00 08 lwz r8,8(r4)
c0017a8c: 81 24 00 0c lwz r9,12(r4)
c0017a90: 85 44 00 10 lwzu r10,16(r4)
c0017a94: 90 e6 00 04 stw r7,4(r6)
c0017a98: 91 06 00 08 stw r8,8(r6)
c0017a9c: 91 26 00 0c stw r9,12(r6)
c0017aa0: 95 46 00 10 stwu r10,16(r6)
c0017aa4: 42 00 ff dc bdnz c0017a80 <memcpy+0x88>

Commit ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in
DTLB misses") relies on re-reading DAR register to know if an error is
due to a missing copy of a PMD entry in task's PGDIR, allthough DAR
was already read in the exception prolog and copied into thread
struct. This is because is it done very early in the exception and
there are not enough registers available to keep a pointer to thread
struct.

However, dcbz instruction is buggy and doesn't update DAR register on
fault. That is detected and generates a call to FixupDAR workaround
which updates DAR copy in thread struct but doesn't fix DAR register.

Let's fix DAR in addition to the update of DAR copy in thread struct.

Fixes: ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in DTLB misses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2b851399bd87e81c6ccb87ea3a7a6b32c7aa04d7.1728118396.git.christophe.leroy@csgroup.eu

The function Device::from_raw() increments a refcount by a call to
bindings::get_device(ptr). This can be confused because usually
from_raw() functions don't increment a refcount.
Hence, rename Device::from_raw() to avoid confuion with other "from_raw"
semantics.

The new name of function should be "get_device" to be consistent with
the function get_device() already exist in .c files.

This function body also changed, because the `into()` will convert the
`&'a Device` into `ARef<Device>` and also call `inc_ref` from the
`AlwaysRefCounted` trait implemented for Device.

Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1088
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241001205603.106278-1-trintaeoitogc@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 86b20af11e84c26ae3fde4dcc4f490948e3f8035.

This patch leads to passing 0 to simple_read_from_buffer()
as a fifth argument, turning the read method into a nop.
The change is fundamentally flawed, as it breaks the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20241007094004.242122-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull Kbuild fixes from Masahiro Yamada:

- Move non-boot built-in DTBs to the .rodata section

- Fix Kconfig bugs

- Fix maint scripts in the linux-image Debian package

- Import some list macros to scripts/include/

* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section

Pull hwmon fixes from Guenter Roeck:

- Add missing dependencies on REGMAP_I2C for several drivers

- Fix memory leak in adt7475 driver

- Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon
driver to match other sensor labels

* tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Add missing dependency on REGMAP_I2C
hwmon: (ltc2991) Add missing dependency on REGMAP_I2C
hwmon: (adt7470) Add missing dependency on REGMAP_I2C
hwmon: (adm9240) Add missing dependency on REGMAP_I2C
hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C
hwmon: (tmp513) Add missing dependency on REGMAP_I2C
hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config()
hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature

The only input fc_rport_set_marginal_state() currently accepts is
"Marginal" when port_state is "Online", and "Online" when the port_state
is "Marginal". It should also allow setting port_state to its current
state, either "Marginal or "Online".

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Link: https://lore.kernel.org/r/20240917230643.966768-1-bmarzins@redhat.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

I have a ASUS PN51 S mini pc that has two xhci devices. One from AMD,
and other from ASMEDIA. The one from ASMEDIA have problems when resume
from suspend, and keep broken until unplug the power cord. I use this
kernel parameter: xhci-hcd.quirks=128 and then it works ok. I make a
path to reset only the ASMEDIA xhci.

Signed-off-by: Jose Alberto Reguero <jose.alberto.reguero@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240919184202.22249-1-jose.alberto.reguero@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull x86 platform driver fixes from Hans de Goede:

- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops

- Intel Diamond Rapids hw-id additions

- Documentation and MAINTAINERS fixes

- Some other small fixes

* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug

The blank line causes execve() to fail:

# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++

However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.

Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull kselftest fixes from Shuah Khan:
"Fixes for build, run-time errors, and reporting errors:

- ftrace: regression test for a kernel crash when running function
graph tracing and then enabling function profiler.

- rseq: fix for mm_cid test failure.

- vDSO:
- fixes to reporting skip and other error conditions
- changes unconditionally build chacha and getrandom tests on all
architectures to make it easier for them to run in CIs
- build error when sched.h to bring in CLONE_NEWTIME define"

* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
ftrace/selftest: Test combination of function_graph tracer and function profiler
selftests/rseq: Fix mm_cid test failure
selftests: vDSO: Explicitly include sched.h
selftests: vDSO: improve getrandom and chacha error messages
selftests: vDSO: unconditionally build getrandom test
selftests: vDSO: unconditionally build chacha test

This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config, regmap_bus, and devm_regmap_init_i2c.
Add the missing dependency.

Fixes: 021730acbca6 ("hwmon: (max1668) Convert to use regmap")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-4-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->selecting.

Cc: Daniel Palmer <daniel@0x0f.com>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@kernel.org
Fixes: dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/09e11a0a54e6aa2a88bd214526d305aaf018f523.1727926187.git.fthain@linux-m68k.org
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:

#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...

leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:

arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.

Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.

Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Introduce new kernel config symbol for Microchip usb5744 SMBus programming
support. Since usb5744 i2c initialization routine uses i2c SMBus APIs these
APIs should only be invoked when kernel has I2C support. This new kernel
config describes the dependency on I2C kernel support and fix the below
build issues when USB_ONBOARD_DEV=y and CONFIG_I2C=m.

riscv64-linux-ld: drivers/usb/misc/onboard_usb_dev.o:
undefined reference to `i2c_find_device_by_fwnode'
drivers/usb/misc/onboard_usb_dev.c:408:(.text+0xb24): undefined
reference to `i2c_smbus_write_block_data'
<snip>

Parsing of the i2c-bus bus handle is not put under usb5744 kernel config
check as the intention is to report an error when DT is configured for
usb5744 SMBus support and kernel has USB_ONBOARD_DEV_USB5744 disabled.

Fixes: 6782311d04df ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Suggested-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409140539.3Axwv38m-lkp@intel.com/
Acked-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Link: https://lore.kernel.org/r/1727529992-476088-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull kvm fixes from Paolo Bonzini:
"ARM64:

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

x86:

- Fix compilation with KVM_INTEL=KVM_AMD=n

- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use

Selftests:

- Fix compilation on non-x86 architectures"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path

x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().

When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.

Fixes: 5eba0141206e ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f26da ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com

If we follow "make help" to "make dt_binding_schema", we will see
below error:

$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2

It should be a typo. So this will fix it.

Fixes: 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull devicetree fixes from Rob Herring:

- Disable kunit tests for arm64+ACPI

- Fix refcount issue in kunit tests

- Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq

- Drop type ref on 'msi-parent in fsl,qoriq-mc binding

- Move elgin,jg10309-01 to its own binding from trivial-devices

* tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Skip kunit tests when arm64+ACPI doesn't populate root node
of: Fix unbalanced of node refcount and memory leaks
dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent
dt-bindings: display: elgin,jg10309-01: Add own binding

Masami reported a bug when running function graph tracing then the
function profiler. The following commands would cause a kernel crash:

# cd /sys/kernel/tracing/
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled

In that order. Create a test to test this two to make sure this does not
come back as a regression.

Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2

Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config and devm_regmap_init_i2c. Add the missing dependency.

Fixes: 2b9ea4262ae9 ("hwmon: Add driver for ltc2991")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-3-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

After commit 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a
work queue"), it can happen that a work item is sent to an uninitialized
work queue. This may has the effect that the item being queued is never
actually queued, and any further actions depending on it will not
proceed.

The following warning is observed while the fnic driver is loaded:

kernel: WARNING: CPU: 11 PID: 0 at ../kernel/workqueue.c:1524 __queue_work+0x373/0x410
kernel: <IRQ>
kernel: queue_work_on+0x3a/0x50
kernel: fnic_wq_copy_cmpl_handler+0x54a/0x730 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: fnic_isr_msix_wq_copy+0x2d/0x60 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: __handle_irq_event_percpu+0x36/0x1a0
kernel: handle_irq_event_percpu+0x30/0x70
kernel: handle_irq_event+0x34/0x60
kernel: handle_edge_irq+0x7e/0x1a0
kernel: __common_interrupt+0x3b/0xb0
kernel: common_interrupt+0x58/0xa0
kernel: </IRQ>

It has been observed that this may break the rediscovery of Fibre
Channel devices after a temporary fabric failure.

This patch fixes it by moving the work queue initialization out of
an if block in fnic_probe().

Signed-off-by: Martin Wilck <mwilck@suse.com>
Fixes: 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a work queue")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240930133014.71615-1-mwilck@suse.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull mailbox updates from Jassi Brar:

- fix kconfig dependencies (mhu-v3, omap2+)

- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)

- enable sa8255p and qcs8300 ipc controllers (qcom)

- Fix timeout during suspend mode (bcm2835)

- convert to use use of_property_match_string (mailbox)

- enable mt8188 (mediatek)

- use devm_clk_get_enabled helpers (spreadtrum)

- fix device-id typo (rockchip)

* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64

This commit addresses an issue where events were being processed when
the controller was in a halted state. To fix this issue by stop
processing the events as the event count was considered stale or
invalid when the controller was halted.

Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM")
Cc: stable@kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240916231813.206-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull powerpc fix from Michael Ellerman:

- Allow r30 to be used in vDSO code generation of getrandom

Thanks to Jason A. Donenfeld

* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.

Fixes: e04e2b760ddb ("platform/x86: wmi: Pass event data directly to legacy notify handlers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Import list_is_first, list_is_last, list_replace, and list_replace_init.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull fbdev platform driver fix from Helge Deller:
"Switch fbdev drivers back to struct platform_driver::remove()

Now that 'remove()' has been converted to the sane new API, there's
no reason for the 'remove_new()' use, so this converts back to the
traditional and simpler name.

See commits

5c5a7680e67b ("platform: Provide a remove callback that returns no value")
0edb555a65d1 ("platform: Make platform_driver::remove() return void")

for background to this all"

* tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Switch back to struct platform_driver::remove()

A root node is required to apply DT overlays. A root node is usually
present after commit 7b937cc243e5 ("of: Create of_root if no dtb
provided by firmware"), except for on arm64 systems booted with ACPI
tables. In that case, the root node is intentionally not populated
because it would "allow DT devices to be instantiated atop an ACPI base
system"[1].

Introduce an OF function that skips the kunit test if the root node
isn't populated. Limit the test to when both CONFIG_ARM64 and
CONFIG_ACPI are set, because otherwise the lack of a root node is a bug.
Make the function private and take a kunit test parameter so that it
can't be abused to test for the presence of the root node in non-test
code.

Use this function to skip tests that require the root node. Currently
that's the DT tests and any tests that apply overlays.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/6cd337fb-38f0-41cb-b942-5844b84433db@roeck-us.net
Link: https://lore.kernel.org/r/Zd4dQpHO7em1ji67@FVFF77S0Q05N.cambridge.arm.com [1]
Fixes: 893ecc6d2d61 ("of: Add KUnit test to confirm DTB is loaded")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241009204133.1169931-1-sboyd@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by:

glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)")

Without this fix, rseq selftests for mm_cid fail:

./run_param_test.sh
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running mm_cid test spinlock
Error: cpu id getter unavailable

Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
CC: Carlos O'Donell <carlos@redhat.com>
CC: Florian Weimer <fweimer@redhat.com>
CC: linux-kselftest@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config and devm_regmap_init_i2c. Add the missing dependency.

Fixes: ef67959c4253 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-2-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Replace manual offset calculations for response_upiu and prd_table in
ufshcd_init_lrb() with pre-calculated offsets already stored in the
utp_transfer_req_desc structure. The pre-calculated offsets are set
differently in ufshcd_host_memory_configure() based on the
UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk, ensuring correct alignment and
access.

Fixes: 26f968d7de82 ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk")
Cc: stable@vger.kernel.org
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240910044543.3812642-1-avri.altman@wdc.com
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull i2c fixes from Wolfram Sang:

- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed

- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate

- KEBA driver Kconfig dependency fix

- fix XIIC driver power suspend sequence

* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled

Selecting CONFIG_OMAP2PLUS_MBOX while compile testing
causes a build failure:

WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])

Using 'select' to force-enable another subsystem is generally
a mistake and causes problems such as this one, so change the
three drivers that link against this driver to use 'depends on'
instead, and ensure the driver itself can be compile tested
regardless of the platform.

When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there
is a chance for a link failure, so add a careful dependency
on that.

arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'

Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

When dwc3_resume_common() returns an error, runtime pm is left in
suspended and disabled state in dwc3_resume(). Since the device
is suspended, its parent devices (like the power domain or glue
driver) could also be suspended and may have released resources
that dwc requires. Consequently, calling dwc3_suspend_common() in
this situation could result in attempts to access unclocked or
unpowered registers.
To prevent these problems, runtime PM should always be re-enabled,
even after failed resume attempts. This ensures that
dwc3_suspend_common() is skipped in such cases.

Fixes: 68c26fe58182 ("usb: dwc3: set pm runtime active before resume common")
Cc: stable@vger.kernel.org
Signed-off-by: Roy Luo <royluo@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240913232145.3507723-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:

- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup

- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.

- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)

- Various small filesystem connectivitity repair fixes"

* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()

For gettimeofday, -ffixed-r30 was passed to work around a bug in Go
code, where the vDSO trampoline forgot to save and restore this register
across function calls. But Go requires a different trampoline for every
call, and there's no reason that new Go code needs to be broken and add
more bugs. So remove -ffixed-r30 for getrandom.

Fixes: 8072b39c3a75 ("powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240925175021.1526936-2-Jason@zx2c4.com

Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a94222db ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Oliver reports that the kvm_has_feat() helper is not behaviing as
expected for negative feature. On investigation, the main issue
seems to be caused by the following construct:

#define get_idreg_field(kvm, id, fld) \
(id##_##fld##_SIGNED ? \
get_idreg_field_signed(kvm, id, fld) : \
get_idreg_field_unsigned(kvm, id, fld))

where one side of the expression evaluates as something signed,
and the other as something unsigned. In retrospect, this is totally
braindead, as the compiler converts this into an unsigned expression.
When compared to something that is 0, the test is simply elided.

Epic fail. Similar issue exists in the expand_field_sign() macro.

The correct way to handle this is to chose between signed and unsigned
comparisons, so that both sides of the ternary expression are of the
same type (bool).

In order to keep the code readable (sort of), we introduce new
comparison primitives taking an operator as a parameter, and
rewrite the kvm_has_feat*() helpers in terms of these primitives.

Fixes: c62d7a23b947 ("KVM: arm64: Add feature checking helpers")
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Oliver Upton <oliver.upton@linux.dev>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241002204239.2051637-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>

Fix typo in word 'diagnostics' in documentation.

Signed-off-by: Anaswara T Rajan <anaswaratrajan@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005070056.16326-1-anaswaratrajan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

If you enable "Option -> Show Debug Info" and click a link, the program
terminates with the following error:

*** buffer overflow detected ***: terminated

The buffer overflow is caused by the following line:

strcat(data, "$");

The buffer needs one more byte to accommodate the additional character.

Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull gpio fixes from Bartosz Golaszewski:

- fix clock handle leak in probe() error path in gpio-aspeed

- add a dummy register read to ensure the write actually completed

* tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: aspeed: Use devm_clk api to manage clock source
gpio: aspeed: Add the flush write to ensure the write complete.

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/video/fbdev to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

While touching these files, make indention of the struct initializer
consistent in several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Got following report when doing overlay_test:

OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /kunit-test

OF: ERROR: memory leak before free overlay changeset, /kunit-test

In of_overlay_apply_kunit_cleanup(), the "np" should be associated with
fake instead of test to call of_node_put(), so the node is put before
the overlay is removed.

It also fix the following memory leaks:

unreferenced object 0xffffff80c7d22800 (size 256):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 32 bytes):
d0 26 d4 c2 80 ff ff ff 00 00 00 00 00 00 00 00 .&..............
60 19 75 c1 80 ff ff ff 00 00 00 00 00 00 00 00 `.u.............
backtrace (crc ee0a471c):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<00000000c538ac7e>] __kmalloc_cache_noprof+0x26c/0x2f4
[<00000000119f34f3>] __of_node_dup+0x4c/0x328
[<00000000b212ca39>] build_changeset_next_level+0x2cc/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
[<0000000007bd1c51>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c1751960 (size 16):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 16 bytes):
6b 75 6e 69 74 2d 74 65 73 74 00 c1 80 ff ff ff kunit-test......
backtrace (crc 18196259):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<0000000071006e2c>] __kmalloc_node_track_caller_noprof+0x300/0x3e0
[<00000000b16ac6cb>] kstrdup+0x48/0x84
[<0000000050e3373b>] __of_node_dup+0x60/0x328
[<00000000b212ca39>] build_changeset_next_level+0x2cc/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
[<0000000007bd1c51>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c2e96e00 (size 192):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 32 bytes):
80 19 75 c1 80 ff ff ff 0b 00 00 00 00 00 00 00 ..u.............
a0 19 75 c1 80 ff ff ff 00 6f e9 c2 80 ff ff ff ..u......o......
backtrace (crc 1924cba4):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<00000000c538ac7e>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000009fdd35ad>] __of_prop_dup+0x7c/0x2ec
[<00000000aa4e0111>] add_changeset_property+0x548/0x9e0
[<000000004777e25b>] build_changeset_next_level+0xd4/0x4c0
[<00000000a9c93f8a>] build_changeset_next_level+0x3a8/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
[<0000000007bd1c51>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80c1751980 (size 16):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 16 bytes):
63 6f 6d 70 61 74 69 62 6c 65 00 c1 80 ff ff ff compatible......
backtrace (crc 42df3c87):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<0000000071006e2c>] __kmalloc_node_track_caller_noprof+0x300/0x3e0
[<00000000b16ac6cb>] kstrdup+0x48/0x84
[<00000000a8888fd8>] __of_prop_dup+0xb0/0x2ec
[<00000000aa4e0111>] add_changeset_property+0x548/0x9e0
[<000000004777e25b>] build_changeset_next_level+0xd4/0x4c0
[<00000000a9c93f8a>] build_changeset_next_level+0x3a8/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
unreferenced object 0xffffff80c2e96f00 (size 192):
comm "kunit_try_catch", pid 236, jiffies 4294894764
hex dump (first 32 bytes):
40 f7 bb c6 80 ff ff ff 0b 00 00 00 00 00 00 00 @...............
c0 19 75 c1 80 ff ff ff 00 00 00 00 00 00 00 00 ..u.............
backtrace (crc f2f57ea7):
[<0000000058ea1340>] kmemleak_alloc+0x34/0x40
[<00000000c538ac7e>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000009fdd35ad>] __of_prop_dup+0x7c/0x2ec
[<00000000aa4e0111>] add_changeset_property+0x548/0x9e0
[<000000004777e25b>] build_changeset_next_level+0xd4/0x4c0
[<00000000a9c93f8a>] build_changeset_next_level+0x3a8/0x4c0
[<00000000eb208e87>] of_overlay_fdt_apply+0x930/0x1334
[<000000005bdc53a3>] of_overlay_fdt_apply_kunit+0x54/0x10c
[<00000000143acd5d>] of_overlay_apply_kunit_cleanup+0x12c/0x524
[<00000000a813abc8>] kunit_try_run_case+0x13c/0x3ac
[<00000000d77ab00c>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000b296be1>] kthread+0x2e8/0x374
[<0000000007bd1c51>] ret_from_fork+0x10/0x20
......

How to reproduce:
CONFIG_OF_OVERLAY_KUNIT_TEST=y, CONFIG_DEBUG_KMEMLEAK=y
and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, launch the kernel.

Fixes: 5c9dd72d8385 ("of: Add a KUnit test for overlays and test managed APIs")
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20241010034416.2324196-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

The previous commit introduced the use of CLONE_NEWTIME without including
<sched.h> which contains its definition.

Add an explicit include of <sched.h> to ensure that CLONE_NEWTIME
is correctly defined before it is used.

Fixes: 2aec90036dcd ("selftests: vDSO: ensure vgetrandom works in a time namespace")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config and devm_regmap_init_i2c. Add the missing dependency.

Fixes: df885d912f67 ("hwmon: (adm9240) Convert to regmap")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-1-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>