Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.

These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.

Both of these fixes have been in linux-next all week with no reported
issues"

* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build

Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:

- fastrpc revert of a change that broke userspace

- xillybus fixes for reported issues

Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"

* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it

Fix a recently introduced build failure.

Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240805232026.65087-3-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
resolve some reported problems. Included in here are:

- conmakehash.c userspace build issues

- fsl_lpuart driver fix

- 8250_omap revert for reported regression

- atmel_serial rts flag fix

All of these have been in linux-next this week with no reported
issues"

* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
tty: atmel_serial: use the correct RTS flag.
tty: vt: conmakehash: remove non-portable code printing comment header
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port

Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.

All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().

On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().

A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints.

Reported-by: syzbot+eac39cba052f2e750dbe@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/all/0000000000001d44a6061f7a54ee@google.com/T/
Fixes: a53d1202aef1 ("char: xillybus: Add driver for XillyUSB (Xillybus variant for USB)").
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20240816070200.50695-2-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a recently introduced build failure.

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240805232026.65087-2-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:

- thunderbolt driver fixes for reported problems

- typec driver fixes

- xhci fixes

- new device id for ljca usb driver

All of these have been in linux-next this week with no reported
issues"

* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
usb: typec: ucsi: Fix the return value of ucsi_run_command()
usb: xhci: fix duplicate stall handling in handle_tx_event()
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()

This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940.

Kevin reported that this causes a crash during suspend on platforms that
dont use PM domains.

Link: https://lore.kernel.org/r/7ha5hgpchq.fsf@baylibre.com
Cc: Thomas Richard <thomas.richard@bootlin.com>
Fixes: 68e6939ea9ec ("serial: 8250_omap: Set the console genpd always on if no console suspend")
Cc: stable <stable@kernel.org>
Reported-by: Kevin Hilman <khilman@kernel.org>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://lore.kernel.org/r/20240814111747.82371-1-griffin@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As the wakeup work item now runs on a separate workqueue, it needs to be
flushed separately along with flushing the device's workqueue.

Also, move the destroy_workqueue() call to the end of the exit method,
so that deinitialization is done in the opposite order of
initialization.

Fixes: ccbde4b128ef ("char: xillybus: Don't destroy workqueue from work item running on it")
Cc: stable <stable@kernel.org>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20240816070200.50695-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
latency spikes and the fixes don't handle all corner cases. Due to
summer holidays we're taking a shortcut to disable it for release
builds and will fix it in the near future.

- only enable extent map shrinker for DEBUG builds, temporary quick
fix to avoid latency spikes for regular builds

- update target inode's ctime on unlink, mandated by POSIX

- properly take lock to read/update block group's zoned variables

- add counted_by() annotations"

* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: only enable extent map shrinker for DEBUG builds
btrfs: zoned: properly take lock to read/update block group's zoned variables
btrfs: tree-checker: add dev extent item checks
btrfs: update target inode's ctime on unlink
btrfs: send: annotate struct name_cache_entry with __counted_by()

re-enumerating full-speed devices after a failed address device command
can trigger a NULL pointer dereference.

Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size
value during enumeration. Usb core calls usb_ep0_reinit() in this case,
which ends up calling xhci_configure_endpoint().

On Panther point xHC the xhci_configure_endpoint() function will
additionally check and reserve bandwidth in software. Other hosts do
this in hardware

If xHC address device command fails then a new xhci_virt_device structure
is allocated as part of re-enabling the slot, but the bandwidth table
pointers are not set up properly here.
This triggers the NULL pointer dereference the next time usb_ep0_reinit()
is called and xhci_configure_endpoint() tries to check and reserve
bandwidth

[46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd
[46710.713699] usb 3-1: Device not responding to setup address.
[46710.917684] usb 3-1: Device not responding to setup address.
[46711.125536] usb 3-1: device not accepting address 5, error -71
[46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008
[46711.125600] #PF: supervisor read access in kernel mode
[46711.125603] #PF: error_code(0x0000) - not-present page
[46711.125606] PGD 0 P4D 0
[46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI
[46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1
[46711.125620] Hardware name: Gigabyte Technology Co., Ltd.
[46711.125623] Workqueue: usb_hub_wq hub_event [usbcore]
[46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c

Fix this by making sure bandwidth table pointers are set up correctly
after a failed address device command, and additionally by avoiding
checking for bandwidth in cases like this where no actual endpoints are
added or removed, i.e. only context for default control endpoint 0 is
evaluated.

Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@matfyz.cz/
Cc: stable@vger.kernel.org
Fixes: 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240815141117.2702314-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In RS485 mode, the RTS pin is driven high by hardware when the transmitter
is operating. This behaviour cannot be changed. This means that the driver
should claim that it supports SER_RS485_RTS_ON_SEND and not
SER_RS485_RTS_AFTER_SEND.

Otherwise, when configuring the port with the SER_RS485_RTS_ON_SEND, one
get the following warning:

kern.warning kernel: atmel_usart_serial atmel_usart_serial.2.auto:
ttyS1 (1): invalid RTS setting, using RTS_AFTER_SEND instead

which is contradictory with what's really happening.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Cc: stable <stable@kernel.org>
Tested-by: Alexander Dahl <ada@thorsis.com>
Fixes: af47c491e3c7 ("serial: atmel: Fill in rs485_supported")
Link: https://lore.kernel.org/r/20240808060637.19886-1-othacehe@gnu.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit bab2f5e8fd5d2f759db26b78d9db57412888f187.

Joel reported that this commit breaks userspace and stops sensors in
SDM845 from working. Also breaks other qcom SoC devices running postmarketOS.

Cc: stable <stable@kernel.org>
Cc: Ekansh Gupta <quic_ekangupt@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Link: https://lore.kernel.org/r/9a9f5646-a554-4b65-8122-d212bb665c81@umsystem.edu
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: bab2f5e8fd5d ("misc: fastrpc: Restrict untrusted app to attach to privileged PD")
Link: https://lore.kernel.org/r/20240815094920.8242-1-griffin@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull x86 fixes from Thomas Gleixner:

- Fix 32-bit PTI for real.

pti_clone_entry_text() is called twice, once before initcalls so that
initcalls can use the user-mode helper and then again after text is
set read only. Setting read only on 32-bit might break up the PMD
mapping, which makes the second invocation of pti_clone_entry_text()
find the mappings out of sync and failing.

Allow the second call to split the existing PMDs in the user mapping
and synchronize with the kernel mapping.

- Don't make acpi_mp_wake_mailbox read-only after init as the mail box
must be writable in the case that CPU hotplug operations happen after
boot. Otherwise the attempt to start a CPU crashes with a write to
read only memory.

- Add a missing sanity check in mtrr_save_state() to ensure that the
fixed MTRR MSRs are supported.

Otherwise mtrr_save_state() ends up in a #GP, which is fixed up, but
the WARN_ON() can bring systems down when panic on warn is set.

* tag 'x86-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Check if fixed MTRRs exist before saving them
x86/paravirt: Fix incorrect virt spinlock setting on bare metal
x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox
x86/mm: Fix PTI for i386 some more

fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).

So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.

The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().

This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).

Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f258230 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Although there are several patches improving the extent map shrinker,
there are still reports of too frequent shrinker behavior, taking too
much CPU for the kswapd process.

So let's only enable extent shrinker for now, until we got more
comprehensive understanding and a better solution.

Link: https://lore.kernel.org/linux-btrfs/3df4acd616a07ef4d2dc6bad668701504b412ffc.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/c30fd6b3-ca7a-4759-8a53-d42878bf84f7@gmail.com/
Fixes: 956a17d9d050 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Add LJCA GPIO support for the Lunar Lake platform.

New HID taken from out of tree ivsc-driver git repo.

Link: https://github.com/intel/ivsc-driver/commit/47e7c4a446c8ea8c741ff5a32fa7b19f9e6fd47e
Cc: stable <stable@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812095038.555837-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 6e20753da6bc ("tty: vt: conmakehash: cope with abs_srctree no
longer in env") included <linux/limits.h>, which invoked another
(wrong) patch that tried to address a build error on macOS.

According to the specification [1], the correct header to use PATH_MAX
is <limits.h>.

The minimal fix would be to replace <linux/limits.h> with <limits.h>.

However, the following commits seem questionable to me:

- 3bd85c6c97b2 ("tty: vt: conmakehash: Don't mention the full path of the input in output")
- 6e20753da6bc ("tty: vt: conmakehash: cope with abs_srctree no longer in env")

These commits made too many efforts to cope with a comment header in
drivers/tty/vt/consolemap_deftbl.c:

/*
* Do not edit this file; it was automatically generated by
*
* conmakehash drivers/tty/vt/cp437.uni > [this file]
*
*/

With this commit, the header part of the generate C file will be
simplified as follows:

/*
* Automatically generated file; Do not edit.
*/

BTW, another series of excessive efforts for a comment header can be
seen in the following:

- 5ef6dc08cfde ("lib/build_OID_registry: don't mention the full path of the script in output")
- 2fe29fe94563 ("lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat")

[1]: https://pubs.opengroup.org/onlinepubs/009695399/basedefs/limits.h.html

Fixes: 6e20753da6bc ("tty: vt: conmakehash: cope with abs_srctree no longer in env")
Cc: stable <stable@kernel.org>
Reported-by: Daniel Gomez <da.gomez@samsung.com>
Closes: https://lore.kernel.org/all/20240807-macos-build-support-v1-11-4cd1ded85694@samsung.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240809160853.1269466-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Triggered by a kref decrement, destroy_workqueue() may be called from
within a work item for destroying its own workqueue. This illegal
situation is averted by adding a module-global workqueue for exclusive
use of the offending work item. Other work items continue to be queued
on per-device workqueues to ensure performance.

Reported-by: syzbot+91dbdfecdd3287734d8e@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/lkml/0000000000000ab25a061e1dfe9f@google.com/
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20240801121126.60183-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull time keeping fixes from Thomas Gleixner:

- Fix a couple of issues in the NTP code where user supplied values are
neither sanity checked nor clamped to the operating range. This
results in integer overflows and eventualy NTP getting out of sync.

According to the history the sanity checks had been removed in favor
of clamping the values, but the clamping never worked correctly under
all circumstances. The NTP people asked to not bring the sanity
checks back as it might break existing applications.

Make the clamping work correctly and add it where it's missing

- If adjtimex() sets the clock it has to trigger the hrtimer subsystem
so it can adjust and if the clock was set into the future expire
timers if needed. The caller should provide a bitmask to tell
hrtimers which clocks have been adjusted.

adjtimex() uses not the proper constant and uses CLOCK_REALTIME
instead, which is 0. So hrtimers adjusts only the clocks, but does
not check for expired timers, which might make them expire really
late. Use the proper bitmask constant instead.

* tag 'timers-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix bogus clock_was_set() invocation in do_adjtimex()
ntp: Safeguard against time_constant overflow
ntp: Clamp maxerror and esterror to operating range

MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.

So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.

Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().

Add the missing capability check to prevent this.

Fixes: 2b1f6278d77c ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com

Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.

As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"

* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()

__btrfs_add_free_space_zoned() references and modifies bg's alloc_offset,
ro, and zone_unusable, but without taking the lock. It is mostly safe
because they monotonically increase (at least for now) and this function is
mostly called by a transaction commit, which is serialized by itself.

Still, taking the lock is a safer and correct option and I'm going to add a
change to reset zone_unusable while a block group is still alive. So, add
locking around the operations.

Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This reverts commit bf20c69cf3cf9c6445c4925dd9a8a6ca1b78bfdf.

During tcpm_init() stage, if the VBUS is still present after
tcpm_reset_port(), then we assume that VBUS will off and goto safe0v
after a specific discharge time. Following a TCPM_VBUS_EVENT event if
VBUS reach to off state. TCPM_VBUS_EVENT event may be set during
PORT_RESET handling stage. If pd_events reset to 0 after TCPM_VBUS_EVENT
set, we will lost this VBUS event. Then the port state machine may stuck
at one state.

Before:

[ 2.570172] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS]
[ 2.570179] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 2.570182] pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS]
[ 3.490213] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [delayed 920 ms]
[ 3.490220] Start toggling
[ 3.546050] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected]
[ 3.546057] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]

After revert this patch, we can see VBUS off event and the port will goto
expected state.

[ 2.441992] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS]
[ 2.441999] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 2.442002] pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS]
[ 2.442122] VBUS off
[ 2.442125] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev1 NONE_AMS]
[ 2.442127] VBUS VSAFE0V
[ 2.442351] CC1: 0 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected]
[ 2.442357] Start toggling
[ 2.491850] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected]
[ 2.491858] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[ 2.491863] pending state change SRC_ATTACH_WAIT -> SNK_TRY @ 200 ms [rev1 NONE_AMS]
[ 2.691905] state change SRC_ATTACH_WAIT -> SNK_TRY [delayed 200 ms]

Fixes: bf20c69cf3cf ("usb: typec: tcpm: clear pd_event queue in PORT_RESET")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240809112901.535072-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel
sometimes boot hang. It is because normal console still is not ready,
but runtime suspend is called, so early console putchar will hang
in waiting TRDE set in UARTSTAT.

The lpuart driver has auto suspend delay set to 3000ms, but during
uart_add_one_port, a child device serial ctrl will added and probed with
its pm runtime enabled(see serial_ctrl.c).
The runtime suspend call path is:
device_add
|-> bus_probe_device
|->device_initial_probe
|->__device_attach
|-> pm_runtime_get_sync(dev->parent);
|-> pm_request_idle(dev);
|-> pm_runtime_put(dev->parent);

So in the end, before normal console ready, the lpuart get runtime
suspended. And earlycon putchar will hang.

To address the issue, mark last busy just after pm_runtime_enable,
three seconds is long enough to switch from bootconsole to normal
console.

Fixes: 43543e6f539b ("tty: serial: fsl_lpuart: Add runtime pm support")
Cc: stable <stable@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240808140325.580105-1-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull irq fixes from Thomas Gleixner:
"Three small fixes for interrupt core and drivers:

- The interrupt core fails to honor caller supplied affinity hints
for non-managed interrupts and uses the system default affinity on
startup instead. Set the missing flag in the descriptor to tell the
core to use the provided affinity.

- Fix a shift out of bounds error in the Xilinx driver

- Handle switching to level trigger correctly in the RISCV APLIC
driver. It failed to retrigger the interrupt which causes it to
become stale"

* tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Retrigger MSI interrupt on source configuration
irqchip/xilinx: Fix shift out of bounds
genirq/irqdesc: Honor caller provided affinity in alloc_desc()

The addition of the bases argument to clock_was_set() fixed up all call
sites correctly except for do_adjtimex(). This uses CLOCK_REALTIME
instead of CLOCK_SET_WALL as argument. CLOCK_REALTIME is 0.

As a result the effect of that clock_was_set() notification is incomplete
and might result in timers expiring late because the hrtimer code does
not re-evaluate the affected clock bases.

Use CLOCK_SET_WALL instead of CLOCK_REALTIME to tell the hrtimers code
which clock bases need to be re-evaluated.

Fixes: 17a1b8826b45 ("hrtimer: Add bases argument to clock_was_set()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/877ccx7igo.ffs@tglx

The kernel can change spinlock behavior when running as a guest. But this
guest-friendly behavior causes performance problems on bare metal.

The kernel uses a static key to switch between the two modes.

In theory, the static key is enabled by default (run in guest mode) and
should be disabled for bare metal (and in some guests that want native
behavior or paravirt spinlock).

A performance drop is reported when running encode/decode workload and
BenchSEE cache sub-workload.

Bisect points to commit ce0a1b608bfc ("x86/paravirt: Silence unused
native_pv_lock_init() function warning"). When CONFIG_PARAVIRT_SPINLOCKS is
disabled the virt_spin_lock_key is incorrectly set to true on bare
metal. The qspinlock degenerates to test-and-set spinlock, which decreases
the performance on bare metal.

Set the default value of virt_spin_lock_key to false. If booting in a VM,
enable this key. Later during the VM initialization, if other
high-efficient spinlock is preferred (e.g. paravirt-spinlock), or the user
wants the native qspinlock (via nopvspin boot commandline), the
virt_spin_lock_key is disabled accordingly.

This results in the following decision matrix:

X86_FEATURE_HYPERVISOR Y Y Y N
CONFIG_PARAVIRT_SPINLOCKS Y Y N Y/N
PV spinlock Y N N Y/N

virt_spin_lock_key N Y/N Y N

Fixes: ce0a1b608bfc ("x86/paravirt: Silence unused native_pv_lock_init() function warning")
Reported-by: Prem Nath Dey <prem.nath.dey@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Suggested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Suggested-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240806112207.29792-1-yu.c.chen@intel.com

Pull powerpc fixes from Michael Ellerman:

- Fix crashes on 85xx with some configs since the recent hugepd rework.

- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
platforms.

- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.

Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.

* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/topology: Check if a core is online
cpu/SMT: Enable SMT only if a core is online
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
powerpc/mm: Fix size of allocated PGDIR
soc: fsl: qbman: remove unused struct 'cgr_comp'

Currently, migrate_pages_batch() can lock multiple locked folios with an
arbitrary order. Although folio_trylock() is used to avoid deadlock as
commit 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously
firstly") mentioned, it seems try_split_folio() is still missing.

It was found by compaction stress test when I explicitly enable EROFS
compressed files to use large folios, which case I cannot reproduce with
the same workload if large folio support is off (current mainline).
Typically, filesystem reads (with locked file-backed folios) could use
another bdev/meta inode to load some other I/Os (e.g. inode extent
metadata or caching compressed data), so the locking order will be:

file-backed folios (A)
bdev/meta folios (B)

The following calltrace shows the deadlock:
Thread 1 takes (B) lock and tries to take folio (A) lock
Thread 2 takes (A) lock and tries to take folio (B) lock

[Thread 1]
INFO: task stress:1824 blocked for more than 30 seconds.
Tainted: G OE 6.10.0-rc7+ #6
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:stress state:D stack:0 pid:1824 tgid:1824 ppid:1822 flags:0x0000000c
Call trace:
__switch_to+0xec/0x138
__schedule+0x43c/0xcb0
schedule+0x54/0x198
io_schedule+0x44/0x70
folio_wait_bit_common+0x184/0x3f8
<-- folio mapping ffff00036d69cb18 index 996 (**)
__folio_lock+0x24/0x38
migrate_pages_batch+0x77c/0xea0 // try_split_folio (mm/migrate.c:1486:2)
// migrate_pages_batch (mm/migrate.c:1734:16)
<--- LIST_HEAD(unmap_folios) has
..
folio mapping 0xffff0000d184f1d8 index 1711; (*)
folio mapping 0xffff0000d184f1d8 index 1712;
..
migrate_pages+0xb28/0xe90
compact_zone+0xa08/0x10f0
compact_node+0x9c/0x180
sysctl_compaction_handler+0x8c/0x118
proc_sys_call_handler+0x1a8/0x280
proc_sys_write+0x1c/0x30
vfs_write+0x240/0x380
ksys_write+0x78/0x118
__arm64_sys_write+0x24/0x38
invoke_syscall+0x78/0x108
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x148
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x190/0x198

[Thread 2]
INFO: task stress:1825 blocked for more than 30 seconds.
Tainted: G OE 6.10.0-rc7+ #6
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:stress state:D stack:0 pid:1825 tgid:1825 ppid:1822 flags:0x0000000c
Call trace:
__switch_to+0xec/0x138
__schedule+0x43c/0xcb0
schedule+0x54/0x198
io_schedule+0x44/0x70
folio_wait_bit_common+0x184/0x3f8
<-- folio = 0xfffffdffc6b503c0 (mapping == 0xffff0000d184f1d8 index == 1711) (*)
__folio_lock+0x24/0x38
z_erofs_runqueue+0x384/0x9c0 [erofs]
z_erofs_readahead+0x21c/0x350 [erofs] <-- folio mapping 0xffff00036d69cb18 range from [992, 1024] (**)
read_pages+0x74/0x328
page_cache_ra_order+0x26c/0x348
ondemand_readahead+0x1c0/0x3a0
page_cache_sync_ra+0x9c/0xc0
filemap_get_pages+0xc4/0x708
filemap_read+0x104/0x3a8
generic_file_read_iter+0x4c/0x150
vfs_read+0x27c/0x330
ksys_pread64+0x84/0xd0
__arm64_sys_pread64+0x28/0x40
invoke_syscall+0x78/0x108
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x148
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x190/0x198

Link: https://lkml.kernel.org/r/20240729021306.398286-1-hsiangkao@linux.alibaba.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

[REPORT]
There is a corruption report that btrfs refused to mount a fs that has
overlapping dev extents:

BTRFS error (device sdc): dev extent devid 4 physical offset 14263979671552 overlap with previous dev extent end 14263980982272
BTRFS error (device sdc): failed to verify dev extents against chunks: -117
BTRFS error (device sdc): open_ctree failed

[CAUSE]
The direct cause is very obvious, there is a bad dev extent item with
incorrect length.

With btrfs check reporting two overlapping extents, the second one shows
some clue on the cause:

ERROR: dev extent devid 4 offset 14263979671552 len 6488064 overlap with previous dev extent end 14263980982272
ERROR: dev extent devid 13 offset 2257707008000 len 6488064 overlap with previous dev extent end 2257707270144
ERROR: errors found in extent allocation tree or chunk allocation

The second one looks like a bitflip happened during new chunk
allocation:
hex(2257707008000) = 0x20da9d30000
hex(2257707270144) = 0x20da9d70000
diff = 0x00000040000

So it looks like a bitflip happened during new dev extent allocation,
resulting the second overlap.

Currently we only do the dev-extent verification at mount time, but if the
corruption is caused by memory bitflip, we really want to catch it before
writing the corruption to the storage.

Furthermore the dev extent items has the following key definition:

(<device id> DEV_EXTENT <physical offset>)

Thus we can not just rely on the generic key order check to make sure
there is no overlapping.

[ENHANCEMENT]
Introduce dedicated dev extent checks, including:

- Fixed member checks
* chunk_tree should always be BTRFS_CHUNK_TREE_OBJECTID (3)
* chunk_objectid should always be
BTRFS_FIRST_CHUNK_CHUNK_TREE_OBJECTID (256)

- Alignment checks
* chunk_offset should be aligned to sectorsize
* length should be aligned to sectorsize
* key.offset should be aligned to sectorsize

- Overlap checks
If the previous key is also a dev-extent item, with the same
device id, make sure we do not overlap with the previous dev extent.

Reported: Stefan N <stefannnau@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+W5K0rSO3koYTo=nzxxTm1-Pdu1HYgVxEpgJ=aGc7d=E8mGEg@mail.gmail.com/
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The command execution routines need to return the amount of
data that was transferred when succesful.

This fixes an issue where the alternate modes and the power
delivery capabilities are not getting registered.

Fixes: 5e9c1662a89b ("usb: typec: ucsi: rework command execution functions")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240809150343.286942-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported issues for
6.11-rc3. Included in here are:

- usb serial driver MODULE_DESCRIPTION() updates

- usb serial driver fixes

- typec driver fixes

- usb-ip driver fix

- gadget driver fixes

- dt binding update

All of these have been in linux-next with no reported issues"

* tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()
usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message
usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()
usb: gadget: f_fs: restore ffs_func_disable() functionality
USB: serial: debug: do not echo input by default
usb: typec: tipd: Delete extra semi-colon
usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()
usb: gadget: u_serial: Set start_delayed during suspend
usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()
usb: typec: fsa4480: Check if the chip is really there
usb: gadget: core: Check for unset descriptor
usb: vhci-hcd: Do not drop references before new references are gained
usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
usb: gadget: midi2: Fix the response for FB info with block 0xff
dt-bindings: usb: microchip,usb2514: Add USB2517 compatible
USB: serial: garmin_gps: use struct_size() to allocate pkt
USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by
USB: serial: add missing MODULE_DESCRIPTION() macros
USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'

The section 4.5.2 of the RISC-V AIA specification says that "any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode."

When the interrupt type is changed in the sourcecfg register, the APLIC
device might not set the corresponding pending bit, so the interrupt might
never become pending.

To handle sourcecfg register changes for level-triggered interrupts in MSI
mode, manually set the pending bit for retriggering interrupt so it gets
retriggered if it was already asserted.

Fixes: ca8df97fe679 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240809071049.2454-1-yongxuan.wang@sifive.com

Using syzkaller with the recently reintroduced signed integer overflow
sanitizer produces this UBSAN report:

UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:738:18
9223372036854775806 + 4 cannot be represented in type 'long'
Call Trace:
handle_overflow+0x171/0x1b0
__do_adjtimex+0x1236/0x1440
do_adjtimex+0x2be/0x740

The user supplied time_constant value is incremented by four and then
clamped to the operating range.

Before commit eea83d896e31 ("ntp: NTP4 user space bits update") the user
supplied value was sanity checked to be in the operating range. That change
removed the sanity check and relied on clamping after incrementing which
does not work correctly when the user supplied value is in the overflow
zone of the '+ 4' operation.

The operation requires CAP_SYS_TIME and the side effect of the overflow is
NTP getting out of sync.

Similar to the fixups for time_maxerror and time_esterror, clamp the user
space supplied value to the operating range.

[ tglx: Switch to clamping ]

Fixes: eea83d896e31 ("ntp: NTP4 user space bits update")
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-c-v2-1-f3a80096f36f@google.com
Closes: https://github.com/KSPP/linux/issues/352

On a platform using the "Multiprocessor Wakeup Structure"[1] to startup
secondary CPUs the control processor needs to memremap() the physical
address of the MP Wakeup Structure mailbox to the variable
acpi_mp_wake_mailbox, which holds the virtual address of mailbox.

To wake up the AP the control processor writes the APIC ID of AP, the
wakeup vector and the ACPI_MP_WAKE_COMMAND_WAKEUP command into the mailbox.

Current implementation doesn't consider the case which restricts boot time
CPU bringup to 1 with the kernel parameter "maxcpus=1" and brings other
CPUs online later from user space as it sets acpi_mp_wake_mailbox to
read-only after init. So when the first AP is tried to brought online
after init, the attempt to update the variable results in a kernel panic.

The memremap() call that initializes the variable cannot be moved into
acpi_parse_mp_wake() because memremap() is not functional at that point in
the boot process. Also as the APs might never be brought up, keep the
memremap() call in acpi_wakeup_cpu() so that the operation only takes place
when needed.

Fixes: 24dd05da8c79 ("x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init")
Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/20240805103531.1230635-1-zhiquan1.li@intel.com

Pull smb client fixes from Steve French:

- fix for clang warning - additional null check

- fix for cached write with posix locks

- flexible structure fix

* tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: smb2pdu.h: Use static_assert() to check struct sizes
smb3: fix lock breakage for cached writes
smb/client: avoid possible NULL dereference in cifs_free_subrequest()

topology_is_core_online() checks if the core a CPU belongs to
is online. The core is online if at least one of the sibling
CPUs is online. The first CPU of an online core is also online
in the common case, so this should be fairly quick.

Fixes: 73c58e7e1412 ("powerpc: Add HOTPLUG_SMT support")
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731030126.956210-3-nysal@linux.ibm.com

During CMA activation, pages in CMA area are prepared and then freed
without being allocated. This triggers warnings when memory allocation
debug config (CONFIG_MEM_ALLOC_PROFILING_DEBUG) is enabled. Fix this by
marking these pages not tagged before freeing them.

Link: https://lkml.kernel.org/r/20240813150758.855881-2-surenb@google.com
Fixes: d224eb0287fb ("codetag: debug: mark codetags for reserved pages as empty")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Unlink changes the link count on the target inode. POSIX mandates that
the ctime must also change when this occurs.

According to https://pubs.opengroup.org/onlinepubs/9699919799/functions/unlink.html:

"Upon successful completion, unlink() shall mark for update the last data
modification and last file status change timestamps of the parent
directory. Also, if the file's link count is not 0, the last file status
change timestamp of the file shall be marked for update."

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add link to the opengroup docs ]
Signed-off-by: David Sterba <dsterba@suse.com>

Stall handling is managed in the 'process_*' functions, which are called
right before the 'goto' stall handling code snippet. Thus, there should
be a return after the 'process_*' functions. Otherwise, the stall code may
run twice.

Fixes: 1b349f214ac7 ("usb: xhci: add 'goto' for halted endpoint check in handle_tx_event()")
Reported-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240809124408.505786-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tty / serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported problems
for 6.11-rc3. Included in here are:

- sc16is7xx serial driver fixes

- uartclk bugfix for a divide by zero issue

- conmakehash userspace build issue fix

All of these have been in linux-next for a while with no reported
issues"

* tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: conmakehash: cope with abs_srctree no longer in env
serial: sc16is7xx: fix invalid FIFO access with special register set
serial: sc16is7xx: fix TX fifo corruption
serial: core: check uartclk for zero to avoid divide by zero

The function returns with the ppm_lock held if the PPM is
busy or there's an error.

Reported-and-tested-by: Luciano Coelho <luciano.coelho@intel.com>
Fixes: 5e9c1662a89b ("usb: typec: ucsi: rework command execution functions")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reported-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20240806112029.2984319-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.

The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.

The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:

UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
shift exponent 32 is too large for 32-bit type 'unsigned int'

Fix it by promoting the mask to u64 for the test.

Fixes: d50466c90724 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com

Using syzkaller alongside the newly reintroduced signed integer overflow
sanitizer spits out this report:

UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:461:16
9223372036854775807 + 500 cannot be represented in type 'long'
Call Trace:
handle_overflow+0x171/0x1b0
second_overflow+0x2d6/0x500
accumulate_nsecs_to_secs+0x60/0x160
timekeeping_advance+0x1fe/0x890
update_wall_time+0x10/0x30

time_maxerror is unconditionally incremented and the result is checked
against NTP_PHASE_LIMIT, but the increment itself can overflow, resulting
in wrap-around to negative space.

Before commit eea83d896e31 ("ntp: NTP4 user space bits update") the user
supplied value was sanity checked to be in the operating range. That change
removed the sanity check and relied on clamping in handle_overflow() which
does not work correctly when the user supplied value is in the overflow
zone of the '+ 500' operation.

The operation requires CAP_SYS_TIME and the side effect of the overflow is
NTP getting out of sync.

Miroslav confirmed that the input value should be clamped to the operating
range and the same applies to time_esterror. The latter is not used by the
kernel, but the value still should be in the operating range as it was
before the sanity check got removed.

Clamp them to the operating range.

[ tglx: Changed it to clamping and included time_esterror ]

Fixes: eea83d896e31 ("ntp: NTP4 user space bits update")
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-usec-v2-1-d539180f2b79@google.com
Closes: https://github.com/KSPP/linux/issues/354

So it turns out that we have to do two passes of
pti_clone_entry_text(), once before initcalls, such that device and
late initcalls can use user-mode-helper / modprobe and once after
free_initmem() / mark_readonly().

Now obviously mark_readonly() can cause PMD splits, and
pti_clone_pgtable() doesn't like that much.

Allow the late clone to split PMDs so that pagetables stay in sync.

[peterz: Changelog and comments]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20240806184843.GX37996@noisy.programming.kicks-ass.net

Pull i2c fixes from Wolfram Sang:
"I2C core fix replacing IS_ENABLED() with IS_REACHABLE()

For host drivers, there are two fixes:

- Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.

- Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the previous
release"

* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Do not mark ACPI devices as irq safe
i2c: Use IS_REACHABLE() for substituting empty ACPI functions
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume

Commit 9f9bef9bc5c6 ("smb: smb2pdu.h: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct create_context_hdr`. We want to
ensure that when new members need to be added to the flexible structure,
they are always included within this tagged struct.

So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

If a core is offline then enabling SMT should not online CPUs of
this core. By enabling SMT, what is intended is either changing the SMT
value from "off" to "on" or setting the SMT level (threads per core) from a
lower to higher value.

On PowerPC the ppc64_cpu utility can be used, among other things, to
perform the following functions:

ppc64_cpu --cores-on # Get the number of online cores
ppc64_cpu --cores-on=X # Put exactly X cores online
ppc64_cpu --offline-cores=X[,Y,...] # Put specified cores offline
ppc64_cpu --smt={on|off|value} # Enable, disable or change SMT level

If the user has decided to offline certain cores, enabling SMT should
not online CPUs in those cores. This patch fixes the issue and changes
the behaviour as described, by introducing an arch specific function
topology_is_core_online(). It is currently implemented only for PowerPC.

Fixes: 73c58e7e1412 ("powerpc: Add HOTPLUG_SMT support")
Reported-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Closes: https://groups.google.com/g/powerpc-utils-devel/c/wrwVzAAnRlI/m/5KJSoqP4BAAJ
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731030126.956210-2-nysal@linux.ibm.com

In several cases we are freeing pages which were not allocated using
common page allocators. For such cases, in order to keep allocation
accounting correct, we should clear the page tag to indicate that the page
being freed is expected to not have a valid allocation tag. Introduce
clear_page_tag_ref() helper function to be used for this.

Link: https://lkml.kernel.org/r/20240813150758.855881-1-surenb@google.com
Fixes: d224eb0287fb ("codetag: debug: mark codetags for reserved pages as empty")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add the __counted_by compiler attribute to the flexible array member
name to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If xhci_mem_init() fails, it calls into xhci_mem_cleanup() to mop
up the damage. If it fails early enough, before xhci->interrupters
is allocated but after xhci->max_interrupters has been set, which
happens in most (all?) cases, things get uglier, as xhci_mem_cleanup()
unconditionally derefences xhci->interrupters. With prejudice.

Gate the interrupt freeing loop with a check on xhci->interrupters
being non-NULL.

Found while debugging a DMA allocation issue that led the XHCI driver
on this exact path.

Fixes: c99b38c41234 ("xhci: add support to allocate several interrupters")
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Wesley Cheng <quic_wcheng@quicinc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org # 6.8+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240809124408.505786-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull driver core / documentation fixes from Greg KH:
"Here are some small fixes, and some documentation updates for
6.11-rc3. Included in here are:

- embargoed hardware documenation updates based on a lot of review by
legal-types in lots of companies to try to make the process a _bit_
easier for us to manage over time.

- rust firmware documentation fix

- driver detach race fix for the fix that went into 6.11-rc1

All of these have been in linux-next for a while with no reported
issues"

* tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix uevent_show() vs driver detach race
Documentation: embargoed-hardware-issues.rst: add a section documenting the "early access" process
Documentation: embargoed-hardware-issues.rst: minor cleanups and fixes
rust: firmware: fix invalid rustdoc link

conmakehash uses getenv("abs_srctree") from the environment to strip
the absolute path from the generated sources.
However since commit e2bad142bb3d ("kbuild: unexport abs_srctree and
abs_objtree") this environment variable no longer gets set.
Instead use basename() to indicate the used file in a comment of the
generated source file.

Fixes: 3bd85c6c97b2 ("tty: vt: conmakehash: Don't mention the full path of the input in output")
Cc: stable <stable@kernel.org>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Link: https://lore.kernel.org/stable/20240725132056.9151-1-max.oss.09%40gmail.com
Link: https://lore.kernel.org/r/20240725132056.9151-1-max.oss.09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit (122968f8dda8 usb: typec: tcpm: avoid resets for missing
source capability messages), state will change from SNK_WAIT_CAPABILITIES
to SNK_WAIT_CAPABILITIES_TIMEOUT. We need to change SNK_WAIT_CAPABILITIES
-> SNK_READY path to SNK_WAIT_CAPABILITIES_TIMEOUT -> SNK_READY
accordingly. Otherwise, the sink port will never change to SNK_READY state
if the source does't have PD capability.

[ 503.547183] pending state change SNK_WAIT_CAPABILITIES -> SNK_WAIT_CAPABILITIES_TIMEOUT @ 310 ms [rev3 NONE_AMS]
[ 503.857239] state change SNK_WAIT_CAPABILITIES -> SNK_WAIT_CAPABILITIES_TIMEOUT [delayed 310 ms]
[ 503.857254] PD TX, header: 0x87
[ 503.862440] PD TX complete, status: 2
[ 503.862484] state change SNK_WAIT_CAPABILITIES_TIMEOUT -> SNK_UNATTACHED [rev3 NONE_AMS]

Fixes: 122968f8dda8 ("usb: typec: tcpm: avoid resets for missing source capability messages")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20240802064156.1846768-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, whenever a caller is providing an affinity hint for an
interrupt, the allocation code uses it to calculate the node and copies the
cpumask into irq_desc::affinity.

If the affinity for the interrupt is not marked 'managed' then the startup
of the interrupt ignores irq_desc::affinity and uses the system default
affinity mask.

Prevent this by setting the IRQD_AFFINITY_SET flag for the interrupt in the
allocator, which causes irq_setup_affinity() to use irq_desc::affinity on
interrupt startup if the mask contains an online CPU.

[ tglx: Massaged changelog ]

Fixes: 45ddcecbfa94 ("genirq: Use affinity hint in irqdesc allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20240806072044.837827-1-shayd@nvidia.com