tjh.dev
commits
Yes, staying withing 80 columns is certainly still _preferred_. But
it's not the hard limit that the checkpatch warnings imply, and other
concerns can most certainly dominate.
Increase the default limit to 100 characters. Not because 100
characters is some hard limit either, but that's certainly a "what are
you doing" kind of value and less likely to be about the occasional
slightly longer lines.
Miscellanea:
- to avoid unnecessary whitespace changes in files, checkpatch will no
longer emit a warning about line length when scanning files unless
--strict is also used
- Add a bit to coding-style about alignment to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current,
which is not the case when fork fails after taking a reference on
the ioperm bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build"
* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent a memory leak when fork fails
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
copy_xstate_to_kernel(): don't leave parts of destination uninitialized
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix preventing a crash in NUMA balancing.
The current->mm check is not reliable as the mm might be temporary due
to use_mm() in a kthread. Check for PF_KTHREAD explictly"
* tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Don't NUMA balance for kthreads
Pick up FPU register dump fixes from Al Viro.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
"Another week, another set of bug fixes:
1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.
2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
Long.
3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
Lüssing.
4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
Pablo Neira Ayuso.
5) Fix race in ktls code between tls_sw_recvmsg() and
tls_decrypt_done(), from Vinay Kumar Yadav.
6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.
7) More validation is necessary of untrusted GSO packets coming from
virtualization devices, from Willem de Bruijn.
8) Fix endianness of bnxt_en firmware message length accesses, from
Edwin Peer.
9) Fix infinite loop in sch_fq_pie, from Davide Caratti.
10) Fix lockdep splat in DSA by setting lockless TX in netdev features
for slave ports, from Vladimir Oltean.
11) Fix suspend/resume crashes in mlx5, from Mark Bloch.
12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.
13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
Stefano reported a crash with using SQPOLL with io_uring:
BUG: kernel NULL pointer dereference, address: 00000000000003b0
CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 #11
RIP: 0010:task_numa_work+0x4f/0x2c0
Call Trace:
task_work_run+0x68/0xa0
io_sq_thread+0x252/0x3d0
kthread+0xf9/0x130
ret_from_fork+0x35/0x40
which is task_numa_work() oopsing on current->mm being NULL.
The task work is queued by task_tick_numa(), which checks if current->mm is
NULL at the time of the call. But this state isn't necessarily persistent,
if the kthread is using use_mm() to temporarily adopt the mm of a task.
Change the task_tick_numa() check to exclude kernel threads in general,
as it doesn't make sense to attempt ot balance for kthreads anyway.
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/865de121-8190-5d30-ece5-3b097dc74431@kernel.dk
In the copy_process() routine called by _do_fork(), failure to allocate
a PID (or further along in the function) will trigger an invocation to
exit_thread(). This is done to clean up from an earlier call to
copy_thread_tls(). Naturally, the child task is passed into exit_thread(),
however during the process, io_bitmap_exit() nullifies the parent's
io_bitmap rather than the child's.
As copy_thread_tls() has been called ahead of the failure, the reference
count on the calling thread's io_bitmap is incremented as we would expect.
However, io_bitmap_exit() doesn't accept any arguments, and thus assumes
it should trash the current thread's io_bitmap reference rather than the
child's. This is pretty sneaky in practice, because in all instances but
this one, exit_thread() is called with respect to the current task and
everything works out.
A determined attacker can issue an appropriate ioctl (i.e. KDENABIO) to
get a bitmap allocated, and force a clone3() syscall to fail by passing
in a zeroed clone_args structure. The kernel handles the erroneous struct
and the buggy code path is followed, and even though the parent's reference
to the io_bitmap is trashed, the child still holds a reference and thus
the structure will never be freed.
Fix this by tweaking io_bitmap_exit() and its subroutines to accept a
task_struct argument which to operate on.
Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped")
Signed-off-by: Jay Lang <jaytlang@mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable#@vger.kernel.org
Link: https://lkml.kernel.org/r/20200524162742.253727-1-jaytlang@mit.edu
copy the corresponding pieces of init_fpstate into the gaps instead.
Cc: stable@kernel.org
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull powerpc fixes from Michael Ellerman:
- a fix for the recent change to how we restore non-volatile GPRs,
which broke our emulation of reading from the DSCR (Data Stream
Control Register).
- a fix for the recent rewrite of interrupt/syscall exit in C, we need
to exclude KCOV from that code, otherwise it can lead to
unrecoverable faults.
Thanks to Daniel Axtens.
* tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code
powerpc/64s: Fix restore of NV GPRs after facility unavailable exception
syzbot was able to trigger a crash after using an ISDN socket
and fool l2tp.
Fix this by making sure the UDP socket is of the proper family.
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018
CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382
__kasan_report.cold+0x20/0x38 mm/kasan/report.c:511
kasan_report+0x33/0x50 mm/kasan/common.c:625
setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523
l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249
genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e6/0x810 net/socket.c:2352
___sys_sendmsg+0x100/0x170 net/socket.c:2406
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4
Allocated by task 3018:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
__kasan_kmalloc mm/kasan/common.c:495 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x161/0x7a0 mm/slab.c:3665
kmalloc include/linux/slab.h:560 [inline]
sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612
sk_alloc+0x36/0x1100 net/core/sock.c:1666
data_sock_create drivers/isdn/mISDN/socket.c:600 [inline]
mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Freed by task 2484:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
kasan_set_free_info mm/kasan/common.c:317 [inline]
__kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456
__cache_free mm/slab.c:3426 [inline]
kfree+0x109/0x2b0 mm/slab.c:3757
kvfree+0x42/0x50 mm/util.c:603
__free_fdtable+0x2d/0x70 fs/file.c:31
put_files_struct fs/file.c:420 [inline]
put_files_struct+0x248/0x2e0 fs/file.c:413
exit_files+0x7e/0xa0 fs/file.c:445
do_exit+0xb04/0x2dd0 kernel/exit.c:791
do_group_exit+0x125/0x340 kernel/exit.c:894
get_signal+0x47b/0x24e0 kernel/signal.c:2739
do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784
exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161
prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305
entry_SYSCALL_64_after_hwframe+0x49/0xb3
The buggy address belongs to the object at ffff88808ed0c000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1424 bytes inside of
2048-byte region [ffff88808ed0c000, ffff88808ed0c800)
The buggy address belongs to the page:
page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00
raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 6b9f34239b00 ("l2tp: fix races in tunnel creation")
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Guillaume Nault <gnault@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although not exactly identical, unthrottle_cfs_rq() and enqueue_task_fair()
are quite close and follow the same sequence for enqueuing an entity in the
cfs hierarchy. Modify unthrottle_cfs_rq() to use the same pattern as
enqueue_task_fair(). This fixes a problem already faced with the latter and
add an optimization in the last for_each_sched_entity loop.
Fixes: fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
Reported-by Tao Zhou <zohooouoto@zoho.com.cn>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20200513135528.4742-1-vincent.guittot@linaro.org
The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is
4 294 967 296 or 0x100000000 which is no problem on 64 bit systems.
The patch does not change the later overall result of 0x100000 for
MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new
calculation yields the same result, but does not require 64 bit
arithmetic.
On 32 bit systems the old calculation suffers from an arithmetic
overflow in that intermediate term in braces: 4UL aka unsigned long int
is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does
not fit in 4 bytes), the in braces result is truncated to zero, the
following right shift does not alter that, so MAX_DMA32_PFN evaluates to
0 on 32 bit systems.
That wrong value is a problem in a comparision against MAX_DMA32_PFN in
the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if
swiotlb should be active. That comparison yields the opposite result,
when compiling on 32 bit systems.
This was not possible before
1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
when that MAX_DMA32_PFN was first made visible to x86_32 (and which
landed in v3.0).
In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on
x86-32.
However if one has set CONFIG_IOMMU_INTEL, since
c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used")
there's a dependency on CONFIG_SWIOTLB, which was not necessarily
active before. That landed in v5.4, where we noticed it in the fli4l
Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64
bit kernel configs there (I could not find out why, so let's just say
historical reasons).
The effect is at boot time 64 MiB (default size) were allocated for
bounce buffers now, which is a noticeable amount of memory on small
systems like pcengines ALIX 2D3 with 256 MiB memory, which are still
frequently used as home routers.
We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4
(LTS) in fli4l and got that kernel messages for example:
Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018
…
Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem)
…
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB)
The initial analysis and the suggested fix was done by user 'sourcejedi'
at stackoverflow and explicitly marked as GPLv2 for inclusion in the
Linux kernel:
https://unix.stackexchange.com/a/520525/50007
The new calculation, which does not suffer from that overflow, is the
same as for arch/mips now as suggested by Robin Murphy.
The fix was tested by fli4l users on round about two dozen different
systems, including both 32 and 64 bit archs, bare metal and virtualized
machines.
[ bp: Massage commit message. ]
Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://unix.stackexchange.com/q/520065/50007
Link: https://web.nettworks.org/bugs/browse/FFL-2560
Link: https://lkml.kernel.org/r/20200526175749.20742-1-post@lespocky.de
cpy and set really should be size_t; we won't get an overflow on that,
since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *),
so nr that would've managed to overflow size_t on that multiplication
won't get anywhere near copy_fdtable() - we'll fail with EMFILE
before that.
Cc: stable@kernel.org # v2.6.25+
Fixes: 9cfe015aa424 (get rid of NR_OPEN and introduce a sysctl_nr_open)
Reported-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull GPIO fixes from Linus Walleij:
"Here are some (very) late fixes for GPIO, none of them very serious
except the one tagged for stable for enabling IRQ on open drain lines:
- Fix probing of mvebu chips without PWM
- Fix error path on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes when flags are
changed on lines.
- Fix a sleeping while holding spinlock in the mellanox driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to have IRQs on
open drain lines flagged for output"
* tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: fix locking open drain IRQ lines
gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()
gpio: pxa: Fix return value of pxa_gpio_probe()
gpio: mlxbf2: Fix sleeping while holding spinlock
gpiolib: notify user-space about line status changes after flags are set
gpio: exar: Fix bad handling for ida_simple_get error path
gpio: mvebu: Fix probing for chips without PWM
syzkaller is picking up a bunch of crashes that look like this:
Unrecoverable exception 380 at c00000000037ed60 (msr=8000000000001031)
Oops: Unrecoverable exception, sig: 6 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 874 Comm: syz-executor.0 Not tainted 5.7.0-rc7-syzkaller-00016-gb0c3ba31be3e #0
NIP: c00000000037ed60 LR: c00000000004bac8 CTR: c000000000030990
REGS: c0000000555a7230 TRAP: 0380 Not tainted (5.7.0-rc7-syzkaller-00016-gb0c3ba31be3e)
MSR: 8000000000001031 <SF,ME,IR,DR,LE> CR: 48222882 XER: 20000000
CFAR: c00000000004bac4 IRQMASK: 0
GPR00: c00000000004bb68 c0000000555a74c0 c0000000024b3500 0000000000000005
GPR04: 0000000000000000 0000000000000000 c00000000004bb88 c008000000910000
GPR08: 00000000000b0000 c00000000004bac8 0000000000016000 c000000002503500
GPR12: c000000000030990 c000000003190000 00000000106a5898 00000000106a0000
GPR16: 00000000106a5890 c000000007a92000 c000000008180e00 c000000007a8f700
GPR20: c000000007a904b0 0000000010110000 c00000000259d318 5deadbeef0000100
GPR24: 5deadbeef0000122 c000000078422700 c000000009ee88b8 c000000078422778
GPR28: 0000000000000001 800000000280b033 0000000000000000 c0000000555a75a0
NIP [c00000000037ed60] __sanitizer_cov_trace_pc+0x40/0x50
LR [c00000000004bac8] interrupt_exit_kernel_prepare+0x118/0x310
Call Trace:
[c0000000555a74c0] [c00000000004bb68] interrupt_exit_kernel_prepare+0x1b8/0x310 (unreliable)
[c0000000555a7530] [c00000000000f9a8] interrupt_return+0x118/0x1c0
--- interrupt: 900 at __sanitizer_cov_trace_pc+0x0/0x50
...<random previous call chain>...
This is caused by __sanitizer_cov_trace_pc() causing an SLB fault
after MSR[RI] has been cleared by __hard_EE_RI_disable(), which we
can not recover from.
Do not instrument the new syscall/interrupt entry/exit code with KCOV,
GCOV or UBSAN.
Reported-by: syzbot-ppc64 <ozlabsyz@au1.ibm.com>
Fixes: 68b34588e202 ("powerpc/64/sycall: Implement syscall entry/exit logic in C")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
syzbot recently found a way to crash the kernel [1]
Issue here is that inet_hash() & inet_unhash() are currently
only meant to be used by TCP & DCCP, since only these protocols
provide the needed hashinfo pointer.
L2TP uses a single list (instead of a hash table)
This old bug became an issue after commit 610236587600
("bpf: Add new cgroup attach type to enable sock modifications")
since after this commit, sk_common_release() can be called
while the L2TP socket is still considered 'hashed'.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
sk_common_release+0xba/0x370 net/core/sock.c:3210
inet_create net/ipv4/af_inet.c:390 [inline]
inet_create+0x966/0xe00 net/ipv4/af_inet.c:248
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x441e29
Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29
RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace 23b6578228ce553e ]---
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com
The intention of commit 96e74ebf8d59 ("sched/debug: Add task uclamp
values to SCHED_DEBUG procfs") was to print requested and effective
task uclamp values. The requested values printed are read from p->uclamp,
which holds the last effective values. Fix this by printing the values
from p->uclamp_req.
Fixes: 96e74ebf8d59 ("sched/debug: Add task uclamp values to SCHED_DEBUG procfs")
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/1589115401-26391-1-git-send-email-pkondeti@codeaurora.org
Revert
45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long")
and add a comment to discourage someone else from making the same
mistake again.
It turns out that some user code fails to compile if __X32_SYSCALL_BIT
is unsigned long. See, for example [1] below.
[ bp: Massage and do the same thing in the respective tools/ header. ]
Fixes: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long")
Reported-by: Thorsten Glaser <t.glaser@tarent.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@kernel.org
Link: [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954294
Link: https://lkml.kernel.org/r/92e55442b744a5951fdc9cfee10badd0a5f7f828.1588983892.git.luto@kernel.org
... to protect the modification of mp->m_count done by it. Most of
the places that modify that thing also have namespace_lock held,
but not all of them can do so, so we really need mount_lock here.
Kudos to Piotr Krysiuk <piotras@gmail.com>, who'd spotted a related
bug in pivot_root(2) (fixed unnoticed in 5.3); search for other
similar turds has caught out this one.
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull ARM SoC fixes from Arnd Bergmann:
"This time there is one fix for the error path in the mediatek cmdq
driver (used by their video driver) and a couple of devicetree fixes,
mostly for 32-bit ARM, and fairly harmless:
- On OMAP2 there were a few regressions in the ethernet drivers, one
of them leading to an external abort trap
- One Raspberry Pi version had a misconfigured LED
- Interrupts on Broadcom NSP were slightly misconfigured
- One i.MX6q board had issues with graphics mode setting
- On mmp3 there are some minor fixes that were submitted for v5.8
with a cc:stable tag, so I ended up picking them up here as well
- The Mediatek Video Codec needs to run at a higher frequency than
configured originally"
* tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
ARM: dts: mmp3-dell-ariel: Fix the SPI devices
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
ARM: dts: bcm: HR2: Fix PPI interrupt types
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
ARM: dts/imx6q-bx50v3: Set display interface clock parents
soc: mediatek: cmdq: return send msg error code
arm64: dts: mt8173: fix vcodec-enc clock
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
We provided the right semantics on open drain lines being
by definition output but incidentally the irq set up function
would only allow IRQs on lines that were "not output".
Fix the semantics to allow output open drain lines to be used
for IRQs.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Russell King <linux@armlinux.org.uk>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 702f09805222 ("powerpc/64s/exception: Remove lite interrupt
return") changed the interrupt return path to not restore non-volatile
registers by default, and explicitly restore them in paths where it is
required.
But it missed that the facility unavailable exception can sometimes
modify user registers, ie. when it does emulation of move from DSCR.
This is seen as a failure of the dscr_sysfs_thread_test:
test: dscr_sysfs_thread_test
[cpu 0] User DSCR should be 1 but is 0
failure: dscr_sysfs_thread_test
So restore non-volatile GPRs after facility unavailable exceptions.
Currently the hypervisor facility unavailable exception is also wired
up to call facility_unavailable_exception().
In practice we should never take a hypervisor facility unavailable
exception for the DSCR. On older bare metal systems we set HFSCR_DSCR
unconditionally in __init_HFSCR, or on newer systems it should be
enabled via the "data-stream-control-register" device tree CPU
feature.
Even if it's not, since commit f3c99f97a3cd ("KVM: PPC: Book3S HV:
Don't access HFSCR, LPIDR or LPCR when running nested"), the KVM code
has unconditionally set HFSCR_DSCR when running guests.
So we should only get a hypervisor facility unavailable for the DSCR
if skiboot has disabled the "data-stream-control-register" feature,
and we are somehow in guest context but not via KVM.
Given all that, it should be unnecessary to add a restore of
non-volatile GPRs after the hypervisor facility exception, because we
never expect to hit that path. But equally we may as well add the
restore, because we never expect to hit that path, and if we ever did,
at least we would correctly restore the registers to their post
emulation state.
In future we can split the non-HV and HV facility unavailable handling
so that there is no emulation in the HV handler, and then remove the
restore for the HV case.
Fixes: 702f09805222 ("powerpc/64s/exception: Remove lite interrupt return")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200526061808.2472279-1-mpe@ellerman.id.au
A null pointer dereference in qrtr_ns_data_ready() is seen if a client
opens a qrtr socket before qrtr_ns_init() can bind to the control port.
When the control port is bound, the ENETRESET error will be broadcasted
and clients will close their sockets. This results in DEL_CLIENT
packets being sent to the ns and qrtr_ns_data_ready() being called
without the workqueue being allocated.
Allocate the workqueue before setting sk_data_ready and binding to the
control port. This ensures that the work and workqueue structs are
allocated and initialized before qrtr_ns_data_ready can be called.
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Chris Lew <clew@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sched/fair: Fix enqueue_task_fair warning some more
The recent patch, fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
did not fully resolve the issues with the rq->tmp_alone_branch !=
&rq->leaf_cfs_rq_list warning in enqueue_task_fair. There is a case where
the first for_each_sched_entity loop exits due to on_rq, having incompletely
updated the list. In this case the second for_each_sched_entity loop can
further modify se. The later code to fix up the list management fails to do
what is needed because se does not point to the sched_entity which broke out
of the first loop. The list is not fixed up because the throttled parent was
already added back to the list by a task enqueue in a parallel child hierarchy.
Address this by calling list_add_leaf_cfs_rq if there are throttled parents
while doing the second for_each_sched_entity loop.
Fixes: fe61468b2cb ("sched/fair: Fix enqueue_task_fair warning")
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200512135222.GC2201@lorien.usersys.redhat.com
'count' is how much you want written, not the final position.
Moreover, it can legitimately be less than the current position...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull ceph fixes from Ilya Dryomov:
"Cache tiering and cap handling fixups, both marked for stable"
* tag 'ceph-for-5.7-rc8' of git://github.com/ceph/ceph-client:
ceph: flush release queue when handling caps for unknown inode
libceph: ignore pool overlay and cache logic on redirects
Few cpsw related dts fixes for omaps
Recent cpsw driver changes exposed few regressions in the cpsw related
dts configuration that would be good to fix:
- Few more boards still need to be updated to use rgmii-rxid phy caused
by the fallout from commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode
support for the KSZ9031 PHY" as the rx delay is now disabled unless we
use rgmii-rxid.
- On dm814x we have been using a wrong clock for mdio that now can produce
external abort on some boards
* tag 'omap-for-v5.7/cpsw-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
Link: https://lore.kernel.org/r/pull-1589472123-367692@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
gpio fixes for v5.7
- fix mutex and spinlock ordering in gpio-mlxbf2
- fix the return value checks on devm_platform_ioremap_resource in
gpio-pxa and gpio-bcm-kona
Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.
Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.
Although fixes for those are in development, they're not -rc material.
There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.
So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.
Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au
Paolo Abeni says:
====================
mptcp: a bunch of fixes
This patch series pulls together a few bugfixes for MPTCP bug observed while
doing stress-test with apache bench - forced to use MPTCP and multiple
subflows.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull EFI fixes from Thomas Gleixner:
"A set of EFI fixes:
- Don't return a garbage screen info when EFI framebuffer is not
available
- Make the early EFI console work properly with wider fonts instead
of drawing garbage
- Prevent a memory buffer leak in allocate_e820()
- Print the firmware error record properly so it can be decoded by
users
- Fix a symbol clash in the host tool build which only happens with
newer compilers.
- Add a missing check for the event log version of TPM which caused
boot failures on several Dell systems due to an attempt to decode
SHA-1 format with the crypto agile algorithm"
* tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tpm: check event log version before reading final events
efi: Pull up arch-specific prototype efi_systab_show_arch()
x86/boot: Mark global variables as static
efi: cper: Add support for printing Firmware Error Record Reference
efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820()
efi/earlycon: Fix early printk for wider fonts
efi/libstub: Avoid returning uninitialized data from setup_graphics()
Pull gfs2 fix from Andreas Gruenbacher:
"Fix the previous, flawed gfs2_find_jhead commit"
* tag 'gfs2-v5.7-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Even more gfs2_find_jhead fixes
It's possible for the VFS to completely forget about an inode, but for
it to still be sitting on the cap release queue. If the MDS sends the
client a cap message for such an inode, it just ignores it today, which
can lead to a stall of up to 5s until the cap release queue is flushed.
If we get a cap message for an inode that can't be located, then go
ahead and flush the cap release queue.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/45532
Fixes: 1e9c2eb6811e ("ceph: delete stale dentry when last reference is dropped")
Reported-and-Tested-by: Andrej Filipčič <andrej.filipcic@ijs.si>
Suggested-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.7, please pull the following:
- Vincent fixes the polarity of the ACT LED on the Raspberry Pi Zero W
board
- Hamish fixes the ARM PPI interrupts sensitivy for the Hurricane 2
SoCs
* tag 'arm-soc/for-5.7/devicetree-fixes-part2-v2' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: HR2: Fix PPI interrupt types
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
Link: https://lore.kernel.org/r/20200524203714.17035-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Recent PTP-specific cpsw driver changes started exposing an issue on at
at least j5eco-evm:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xf0169004
...
(davinci_mdio_runtime_suspend) from [<c063f2a4>] (__rpm_callback+0x84/0x154)
(__rpm_callback) from [<c063f394>] (rpm_callback+0x20/0x80)
(rpm_callback) from [<c063f4f0>] (rpm_suspend+0xfc/0x6ac)
(rpm_suspend) from [<c0640af0>] (pm_runtime_work+0x88/0xa4)
(pm_runtime_work) from [<c0155338>] (process_one_work+0x228/0x568)
...
Let's fix the issue by using the correct mdio clock as suggested by
Grygorii Strashko <grygorii.strashko@ti.com>.
The DM814_ETHERNET_CPGMAC0_CLKCTRL clock is the interconnect target module
clock and managed by ti-sysc.
Fixes: 6398f3478e45 ("ARM: dts: Configure interconnect target module for dm814x cpsw")
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
gpio fixes for v5.7-rc6
- fix probing for chips without PWM in gpio-mvebu
- fix ida_simple_get() error path in gpio-exar
- fix user-space notifications for line state changes
Propagate the error code returned by devm_platform_ioremap_resource()
out of probe() instead of overwriting it.
Fixes: 72d8cb715477 ("drivers: gpio: bcm-kona: use devm_platform_ioremap_resource()")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This reverts commit 697ece78f8f749aeea40f2711389901f0974017a.
The implementation of SWAP on powerpc requires page protection
bits to not be one of the least significant PTE bits.
Until the SWAP implementation is changed and this requirement voids,
we have to keep at least _PAGE_RW outside of the 3 last bits.
For now, revert to previous PTE bits order. A further rework
may come later.
Fixes: 697ece78f8f7 ("powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits.")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b34706f8de87f84d135abb5f3ede6b6f16fb1f41.1589969799.git.christophe.leroy@csgroup.eu
Currently add nat mangle action with comparing invert and orig tuple.
It is better to check IPS_NAT_MASK flags first to avoid non necessary
memcmp for non-NAT conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we remote the msk from the token container only
via mptcp_close(). The MPTCP master socket can be destroyed
also via other paths (e.g. if not yet accepted, when shutting
down the listener socket). When we hit the latter scenario,
dangling msk references are left into the token container,
leading to memory corruption and/or UaF.
This change addresses the issue by moving the token removal
into the msk destructor.
Fixes: 79c0949e9a09 ("mptcp: Add key generation and token tree")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull IPMI update from Corey Minyard:
"Convert i2c_new_device() to i2c_new_client_device()
Wolfram Sang has asked to have this included in 5.7 so the deprecated
API can be removed next release. There should be no functional
difference.
I think that entire this section of code can be removed; it is
leftover from other things that have since changed, but this is the
safer thing to do for now. The full removal can happen next release"
* tag 'for-linus-5.7-2' of git://github.com/cminyard/linux-ipmi:
char: ipmi: convert to use i2c_new_client_device()
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Unbreak stack dumps for inactive tasks by interpreting the special
first frame left by __switch_to_asm() correctly.
The recent change not to skip the first frame so ORC and frame
unwinder behave in the same way caused all entries to be
unreliable, i.e. prepended with '?'.
- Use cpumask_available() instead of an implicit NULL check of a
cpumask_var_t in mmio trace to prevent a Clang build warning"
* tag 'x86-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks
x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables
Pull EFI fixes from Ard Biesheuvel:
"- fix EFI framebuffer earlycon for wide fonts
- avoid filling screen_info with garbage if the EFI framebuffer is not
available
- fix a potential host tool build error due to a symbol clash on x86
- work around a EFI firmware bug regarding the binary format of the TPM
final events table
- fix a missing memory free by reworking the E820 table sizing routine to
not do the allocation in the first place
- add CPER parsing for firmware errors"
This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file. But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.
This was entirely scripted:
./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull arm64 fix from Catalin Marinas:
"Ensure __cpu_up() returns an error if cpu_online() is false after
waiting for completion on cpu_running"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/kernel: Fix return value when cpu_online() fails in __cpu_up()
Fix several issues in the previous gfs2_find_jhead fix:
* When updating @blocks_submitted, @block refers to the first block block not
submitted yet, not the last block submitted, so fix an off-by-one error.
* We want to ensure that @blocks_submitted is far enough ahead of @blocks_read
to guarantee that there is in-flight I/O. Otherwise, we'll eventually end up
waiting for pages that haven't been submitted, yet.
* It's much easier to compare the number of blocks added with the number of
blocks submitted to limit the maximum bio size.
* Even with bio chaining, we can keep adding blocks until we reach the maximum
bio size, as long as we stop at a page boundary. This simplifies the logic.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
OSD client should ignore cache/overlay flag if got redirect reply.
Otherwise, the client hangs when the cache tier is in forward mode.
[ idryomov: Redirects are effectively deprecated and no longer
used or tested. The original tiering modes based on redirects
are inherently flawed because redirects can race and reorder,
potentially resulting in data corruption. The new proxy and
readproxy tiering modes should be used instead of forward and
readforward. Still marking for stable as obviously correct,
though. ]
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/23296
URL: https://tracker.ceph.com/issues/36406
Signed-off-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
* 'v5.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: cmdq: return send msg error code
arm64: dts: mt8173: fix vcodec-enc clock
Link: https://lore.kernel.org/r/33a0556a-e2a3-7f0b-b09b-4516642a4bfe@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These error messages are output when booting on a BCM HR2 system:
GIC: PPI11 is secure or misconfigured
GIC: PPI13 is secure or misconfigured
Per ARM documentation these interrupts are triggered on a rising edge.
See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
Section 3.3.8 Interrupt Configuration Registers.
The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
("ARM: dts: NSP: Fix PPI interrupt types").
Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY") the networking is broken on boards:
am437x-gp-evm
am437x-sk-evm
am437x-idk-evm
All above boards have phy-mode = "rgmii" and this is worked before, because
KSZ9031 PHY started with default RGMII internal delays configuration (TX
off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
KSZ9031 PHY starts handling phy mode properly and disables RX delay, as
result networking is become broken.
Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
behavior.
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Currently we emit the REQUESTED line state event after the line is
requested but before the flags are configured. This is obviously wrong
as we want to pass the updated lineinfo to user-space together with the
event.
Since the flags can be configured in different ways depending on how the
line is being requested - we need to call the notifier chain in different
places separately.
Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Fixes: 542c25b7a209 ("drivers: gpio: pxa: use devm_platform_ioremap_resource()")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
When CONFIG_VIRT_CPU_ACCOUNTING is selected, system call exception
handler doesn't fit below 0xd00 and build fails.
As exception 0xd00 doesn't exist and is never generated by 40x,
comment it out in order to get more space for system call exception.
Fixes: 9e27086292aa ("powerpc/32: Warn and return ENOSYS on syscalls from kernel")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/633165d72f75b4ef4c0901aebe99d3915c93e9a2.1589043863.git.christophe.leroy@csgroup.eu
When devinet_sysctl_register() failed, the memory allocated
in neigh_parms_alloc() should be freed.
Fixes: 20e61da7ffcf ("ipv4: fail early when creating netdev named all or default")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a MP_JOIN subflow completes the 3whs while another
CPU is closing the master msk, we can hit the
following race:
CPU1 CPU2
close()
mptcp_close
subflow_syn_recv_sock
mptcp_token_get_sock
mptcp_finish_join
inet_sk_state_load
mptcp_token_destroy
inet_sk_state_store(TCP_CLOSE)
__mptcp_flush_join_list()
mptcp_sock_graft
list_add_tail
sk_common_release
sock_orphan()
<socket free>
The MP_JOIN socket will be leaked. Additionally we can hit
UaF for the msk 'struct socket' referenced via the 'conn'
field.
This change try to address the issue introducing some
synchronization between the MP_JOIN 3whs and mptcp_close
via the join_list spinlock. If we detect the msk is closing
the MP_JOIN socket is closed, too.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull clk fixes from Stephen Boyd:
"Some more clk driver fixes and one core framework fix:
- A handful of TI driver fixes for bad of_node_put() and incorrect
parent names
- Rockchip rk3228 aclk_gpu* creation was interfering with lima GPU
work so we use a composite clk now
- Resuming from suspend on Tegra Jetson TK1 was broken because an
audio PLL calculated an incorrect rate
- A fix for devicetree probing on IM-PD1 by actually specifying a clk
name which is required to pass clk registration
- Avoid list corruption if registration fails for a critical clk"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: convert subclocks to use proper names also
clk: ti: am33xx: fix RTC clock parent
clk: ti: clkctrl: Fix Bad of_node_put within clkctrl_get_name
clk: tegra: Fix initial rate for pll_a on Tegra124
clk: impd1: Look up clock-output-names
clk: Unlink clock if failed to prepare or enable
clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks
Yes, staying withing 80 columns is certainly still _preferred_. But
it's not the hard limit that the checkpatch warnings imply, and other
concerns can most certainly dominate.
Increase the default limit to 100 characters. Not because 100
characters is some hard limit either, but that's certainly a "what are
you doing" kind of value and less likely to be about the occasional
slightly longer lines.
Miscellanea:
- to avoid unnecessary whitespace changes in files, checkpatch will no
longer emit a warning about line length when scanning files unless
--strict is also used
- Add a bit to coding-style about alignment to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current,
which is not the case when fork fails after taking a reference on
the ioperm bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build"
* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent a memory leak when fork fails
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
copy_xstate_to_kernel(): don't leave parts of destination uninitialized
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix preventing a crash in NUMA balancing.
The current->mm check is not reliable as the mm might be temporary due
to use_mm() in a kthread. Check for PF_KTHREAD explictly"
* tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Don't NUMA balance for kthreads
Pull networking fixes from David Miller:
"Another week, another set of bug fixes:
1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.
2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
Long.
3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
Lüssing.
4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
Pablo Neira Ayuso.
5) Fix race in ktls code between tls_sw_recvmsg() and
tls_decrypt_done(), from Vinay Kumar Yadav.
6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.
7) More validation is necessary of untrusted GSO packets coming from
virtualization devices, from Willem de Bruijn.
8) Fix endianness of bnxt_en firmware message length accesses, from
Edwin Peer.
9) Fix infinite loop in sch_fq_pie, from Davide Caratti.
10) Fix lockdep splat in DSA by setting lockless TX in netdev features
for slave ports, from Vladimir Oltean.
11) Fix suspend/resume crashes in mlx5, from Mark Bloch.
12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.
13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
Stefano reported a crash with using SQPOLL with io_uring:
BUG: kernel NULL pointer dereference, address: 00000000000003b0
CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 #11
RIP: 0010:task_numa_work+0x4f/0x2c0
Call Trace:
task_work_run+0x68/0xa0
io_sq_thread+0x252/0x3d0
kthread+0xf9/0x130
ret_from_fork+0x35/0x40
which is task_numa_work() oopsing on current->mm being NULL.
The task work is queued by task_tick_numa(), which checks if current->mm is
NULL at the time of the call. But this state isn't necessarily persistent,
if the kthread is using use_mm() to temporarily adopt the mm of a task.
Change the task_tick_numa() check to exclude kernel threads in general,
as it doesn't make sense to attempt ot balance for kthreads anyway.
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/865de121-8190-5d30-ece5-3b097dc74431@kernel.dk
In the copy_process() routine called by _do_fork(), failure to allocate
a PID (or further along in the function) will trigger an invocation to
exit_thread(). This is done to clean up from an earlier call to
copy_thread_tls(). Naturally, the child task is passed into exit_thread(),
however during the process, io_bitmap_exit() nullifies the parent's
io_bitmap rather than the child's.
As copy_thread_tls() has been called ahead of the failure, the reference
count on the calling thread's io_bitmap is incremented as we would expect.
However, io_bitmap_exit() doesn't accept any arguments, and thus assumes
it should trash the current thread's io_bitmap reference rather than the
child's. This is pretty sneaky in practice, because in all instances but
this one, exit_thread() is called with respect to the current task and
everything works out.
A determined attacker can issue an appropriate ioctl (i.e. KDENABIO) to
get a bitmap allocated, and force a clone3() syscall to fail by passing
in a zeroed clone_args structure. The kernel handles the erroneous struct
and the buggy code path is followed, and even though the parent's reference
to the io_bitmap is trashed, the child still holds a reference and thus
the structure will never be freed.
Fix this by tweaking io_bitmap_exit() and its subroutines to accept a
task_struct argument which to operate on.
Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped")
Signed-off-by: Jay Lang <jaytlang@mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable#@vger.kernel.org
Link: https://lkml.kernel.org/r/20200524162742.253727-1-jaytlang@mit.edu
Pull powerpc fixes from Michael Ellerman:
- a fix for the recent change to how we restore non-volatile GPRs,
which broke our emulation of reading from the DSCR (Data Stream
Control Register).
- a fix for the recent rewrite of interrupt/syscall exit in C, we need
to exclude KCOV from that code, otherwise it can lead to
unrecoverable faults.
Thanks to Daniel Axtens.
* tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code
powerpc/64s: Fix restore of NV GPRs after facility unavailable exception
syzbot was able to trigger a crash after using an ISDN socket
and fool l2tp.
Fix this by making sure the UDP socket is of the proper family.
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018
CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382
__kasan_report.cold+0x20/0x38 mm/kasan/report.c:511
kasan_report+0x33/0x50 mm/kasan/common.c:625
setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523
l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249
genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e6/0x810 net/socket.c:2352
___sys_sendmsg+0x100/0x170 net/socket.c:2406
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4
Allocated by task 3018:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
__kasan_kmalloc mm/kasan/common.c:495 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x161/0x7a0 mm/slab.c:3665
kmalloc include/linux/slab.h:560 [inline]
sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612
sk_alloc+0x36/0x1100 net/core/sock.c:1666
data_sock_create drivers/isdn/mISDN/socket.c:600 [inline]
mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Freed by task 2484:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
kasan_set_free_info mm/kasan/common.c:317 [inline]
__kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456
__cache_free mm/slab.c:3426 [inline]
kfree+0x109/0x2b0 mm/slab.c:3757
kvfree+0x42/0x50 mm/util.c:603
__free_fdtable+0x2d/0x70 fs/file.c:31
put_files_struct fs/file.c:420 [inline]
put_files_struct+0x248/0x2e0 fs/file.c:413
exit_files+0x7e/0xa0 fs/file.c:445
do_exit+0xb04/0x2dd0 kernel/exit.c:791
do_group_exit+0x125/0x340 kernel/exit.c:894
get_signal+0x47b/0x24e0 kernel/signal.c:2739
do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784
exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161
prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305
entry_SYSCALL_64_after_hwframe+0x49/0xb3
The buggy address belongs to the object at ffff88808ed0c000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1424 bytes inside of
2048-byte region [ffff88808ed0c000, ffff88808ed0c800)
The buggy address belongs to the page:
page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00
raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 6b9f34239b00 ("l2tp: fix races in tunnel creation")
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Guillaume Nault <gnault@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although not exactly identical, unthrottle_cfs_rq() and enqueue_task_fair()
are quite close and follow the same sequence for enqueuing an entity in the
cfs hierarchy. Modify unthrottle_cfs_rq() to use the same pattern as
enqueue_task_fair(). This fixes a problem already faced with the latter and
add an optimization in the last for_each_sched_entity loop.
Fixes: fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
Reported-by Tao Zhou <zohooouoto@zoho.com.cn>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20200513135528.4742-1-vincent.guittot@linaro.org
The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is
4 294 967 296 or 0x100000000 which is no problem on 64 bit systems.
The patch does not change the later overall result of 0x100000 for
MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new
calculation yields the same result, but does not require 64 bit
arithmetic.
On 32 bit systems the old calculation suffers from an arithmetic
overflow in that intermediate term in braces: 4UL aka unsigned long int
is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does
not fit in 4 bytes), the in braces result is truncated to zero, the
following right shift does not alter that, so MAX_DMA32_PFN evaluates to
0 on 32 bit systems.
That wrong value is a problem in a comparision against MAX_DMA32_PFN in
the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if
swiotlb should be active. That comparison yields the opposite result,
when compiling on 32 bit systems.
This was not possible before
1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
when that MAX_DMA32_PFN was first made visible to x86_32 (and which
landed in v3.0).
In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on
x86-32.
However if one has set CONFIG_IOMMU_INTEL, since
c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used")
there's a dependency on CONFIG_SWIOTLB, which was not necessarily
active before. That landed in v5.4, where we noticed it in the fli4l
Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64
bit kernel configs there (I could not find out why, so let's just say
historical reasons).
The effect is at boot time 64 MiB (default size) were allocated for
bounce buffers now, which is a noticeable amount of memory on small
systems like pcengines ALIX 2D3 with 256 MiB memory, which are still
frequently used as home routers.
We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4
(LTS) in fli4l and got that kernel messages for example:
Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018
…
Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem)
…
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB)
The initial analysis and the suggested fix was done by user 'sourcejedi'
at stackoverflow and explicitly marked as GPLv2 for inclusion in the
Linux kernel:
https://unix.stackexchange.com/a/520525/50007
The new calculation, which does not suffer from that overflow, is the
same as for arch/mips now as suggested by Robin Murphy.
The fix was tested by fli4l users on round about two dozen different
systems, including both 32 and 64 bit archs, bare metal and virtualized
machines.
[ bp: Massage commit message. ]
Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://unix.stackexchange.com/q/520065/50007
Link: https://web.nettworks.org/bugs/browse/FFL-2560
Link: https://lkml.kernel.org/r/20200526175749.20742-1-post@lespocky.de
cpy and set really should be size_t; we won't get an overflow on that,
since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *),
so nr that would've managed to overflow size_t on that multiplication
won't get anywhere near copy_fdtable() - we'll fail with EMFILE
before that.
Cc: stable@kernel.org # v2.6.25+
Fixes: 9cfe015aa424 (get rid of NR_OPEN and introduce a sysctl_nr_open)
Reported-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull GPIO fixes from Linus Walleij:
"Here are some (very) late fixes for GPIO, none of them very serious
except the one tagged for stable for enabling IRQ on open drain lines:
- Fix probing of mvebu chips without PWM
- Fix error path on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes when flags are
changed on lines.
- Fix a sleeping while holding spinlock in the mellanox driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to have IRQs on
open drain lines flagged for output"
* tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: fix locking open drain IRQ lines
gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()
gpio: pxa: Fix return value of pxa_gpio_probe()
gpio: mlxbf2: Fix sleeping while holding spinlock
gpiolib: notify user-space about line status changes after flags are set
gpio: exar: Fix bad handling for ida_simple_get error path
gpio: mvebu: Fix probing for chips without PWM
syzkaller is picking up a bunch of crashes that look like this:
Unrecoverable exception 380 at c00000000037ed60 (msr=8000000000001031)
Oops: Unrecoverable exception, sig: 6 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 874 Comm: syz-executor.0 Not tainted 5.7.0-rc7-syzkaller-00016-gb0c3ba31be3e #0
NIP: c00000000037ed60 LR: c00000000004bac8 CTR: c000000000030990
REGS: c0000000555a7230 TRAP: 0380 Not tainted (5.7.0-rc7-syzkaller-00016-gb0c3ba31be3e)
MSR: 8000000000001031 <SF,ME,IR,DR,LE> CR: 48222882 XER: 20000000
CFAR: c00000000004bac4 IRQMASK: 0
GPR00: c00000000004bb68 c0000000555a74c0 c0000000024b3500 0000000000000005
GPR04: 0000000000000000 0000000000000000 c00000000004bb88 c008000000910000
GPR08: 00000000000b0000 c00000000004bac8 0000000000016000 c000000002503500
GPR12: c000000000030990 c000000003190000 00000000106a5898 00000000106a0000
GPR16: 00000000106a5890 c000000007a92000 c000000008180e00 c000000007a8f700
GPR20: c000000007a904b0 0000000010110000 c00000000259d318 5deadbeef0000100
GPR24: 5deadbeef0000122 c000000078422700 c000000009ee88b8 c000000078422778
GPR28: 0000000000000001 800000000280b033 0000000000000000 c0000000555a75a0
NIP [c00000000037ed60] __sanitizer_cov_trace_pc+0x40/0x50
LR [c00000000004bac8] interrupt_exit_kernel_prepare+0x118/0x310
Call Trace:
[c0000000555a74c0] [c00000000004bb68] interrupt_exit_kernel_prepare+0x1b8/0x310 (unreliable)
[c0000000555a7530] [c00000000000f9a8] interrupt_return+0x118/0x1c0
--- interrupt: 900 at __sanitizer_cov_trace_pc+0x0/0x50
...<random previous call chain>...
This is caused by __sanitizer_cov_trace_pc() causing an SLB fault
after MSR[RI] has been cleared by __hard_EE_RI_disable(), which we
can not recover from.
Do not instrument the new syscall/interrupt entry/exit code with KCOV,
GCOV or UBSAN.
Reported-by: syzbot-ppc64 <ozlabsyz@au1.ibm.com>
Fixes: 68b34588e202 ("powerpc/64/sycall: Implement syscall entry/exit logic in C")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
syzbot recently found a way to crash the kernel [1]
Issue here is that inet_hash() & inet_unhash() are currently
only meant to be used by TCP & DCCP, since only these protocols
provide the needed hashinfo pointer.
L2TP uses a single list (instead of a hash table)
This old bug became an issue after commit 610236587600
("bpf: Add new cgroup attach type to enable sock modifications")
since after this commit, sk_common_release() can be called
while the L2TP socket is still considered 'hashed'.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
sk_common_release+0xba/0x370 net/core/sock.c:3210
inet_create net/ipv4/af_inet.c:390 [inline]
inet_create+0x966/0xe00 net/ipv4/af_inet.c:248
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x441e29
Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29
RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace 23b6578228ce553e ]---
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com
The intention of commit 96e74ebf8d59 ("sched/debug: Add task uclamp
values to SCHED_DEBUG procfs") was to print requested and effective
task uclamp values. The requested values printed are read from p->uclamp,
which holds the last effective values. Fix this by printing the values
from p->uclamp_req.
Fixes: 96e74ebf8d59 ("sched/debug: Add task uclamp values to SCHED_DEBUG procfs")
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/1589115401-26391-1-git-send-email-pkondeti@codeaurora.org
Revert
45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long")
and add a comment to discourage someone else from making the same
mistake again.
It turns out that some user code fails to compile if __X32_SYSCALL_BIT
is unsigned long. See, for example [1] below.
[ bp: Massage and do the same thing in the respective tools/ header. ]
Fixes: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long")
Reported-by: Thorsten Glaser <t.glaser@tarent.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@kernel.org
Link: [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954294
Link: https://lkml.kernel.org/r/92e55442b744a5951fdc9cfee10badd0a5f7f828.1588983892.git.luto@kernel.org
... to protect the modification of mp->m_count done by it. Most of
the places that modify that thing also have namespace_lock held,
but not all of them can do so, so we really need mount_lock here.
Kudos to Piotr Krysiuk <piotras@gmail.com>, who'd spotted a related
bug in pivot_root(2) (fixed unnoticed in 5.3); search for other
similar turds has caught out this one.
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull ARM SoC fixes from Arnd Bergmann:
"This time there is one fix for the error path in the mediatek cmdq
driver (used by their video driver) and a couple of devicetree fixes,
mostly for 32-bit ARM, and fairly harmless:
- On OMAP2 there were a few regressions in the ethernet drivers, one
of them leading to an external abort trap
- One Raspberry Pi version had a misconfigured LED
- Interrupts on Broadcom NSP were slightly misconfigured
- One i.MX6q board had issues with graphics mode setting
- On mmp3 there are some minor fixes that were submitted for v5.8
with a cc:stable tag, so I ended up picking them up here as well
- The Mediatek Video Codec needs to run at a higher frequency than
configured originally"
* tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
ARM: dts: mmp3-dell-ariel: Fix the SPI devices
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
ARM: dts: bcm: HR2: Fix PPI interrupt types
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
ARM: dts/imx6q-bx50v3: Set display interface clock parents
soc: mediatek: cmdq: return send msg error code
arm64: dts: mt8173: fix vcodec-enc clock
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
We provided the right semantics on open drain lines being
by definition output but incidentally the irq set up function
would only allow IRQs on lines that were "not output".
Fix the semantics to allow output open drain lines to be used
for IRQs.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Russell King <linux@armlinux.org.uk>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 702f09805222 ("powerpc/64s/exception: Remove lite interrupt
return") changed the interrupt return path to not restore non-volatile
registers by default, and explicitly restore them in paths where it is
required.
But it missed that the facility unavailable exception can sometimes
modify user registers, ie. when it does emulation of move from DSCR.
This is seen as a failure of the dscr_sysfs_thread_test:
test: dscr_sysfs_thread_test
[cpu 0] User DSCR should be 1 but is 0
failure: dscr_sysfs_thread_test
So restore non-volatile GPRs after facility unavailable exceptions.
Currently the hypervisor facility unavailable exception is also wired
up to call facility_unavailable_exception().
In practice we should never take a hypervisor facility unavailable
exception for the DSCR. On older bare metal systems we set HFSCR_DSCR
unconditionally in __init_HFSCR, or on newer systems it should be
enabled via the "data-stream-control-register" device tree CPU
feature.
Even if it's not, since commit f3c99f97a3cd ("KVM: PPC: Book3S HV:
Don't access HFSCR, LPIDR or LPCR when running nested"), the KVM code
has unconditionally set HFSCR_DSCR when running guests.
So we should only get a hypervisor facility unavailable for the DSCR
if skiboot has disabled the "data-stream-control-register" feature,
and we are somehow in guest context but not via KVM.
Given all that, it should be unnecessary to add a restore of
non-volatile GPRs after the hypervisor facility exception, because we
never expect to hit that path. But equally we may as well add the
restore, because we never expect to hit that path, and if we ever did,
at least we would correctly restore the registers to their post
emulation state.
In future we can split the non-HV and HV facility unavailable handling
so that there is no emulation in the HV handler, and then remove the
restore for the HV case.
Fixes: 702f09805222 ("powerpc/64s/exception: Remove lite interrupt return")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200526061808.2472279-1-mpe@ellerman.id.au
A null pointer dereference in qrtr_ns_data_ready() is seen if a client
opens a qrtr socket before qrtr_ns_init() can bind to the control port.
When the control port is bound, the ENETRESET error will be broadcasted
and clients will close their sockets. This results in DEL_CLIENT
packets being sent to the ns and qrtr_ns_data_ready() being called
without the workqueue being allocated.
Allocate the workqueue before setting sk_data_ready and binding to the
control port. This ensures that the work and workqueue structs are
allocated and initialized before qrtr_ns_data_ready can be called.
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Chris Lew <clew@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sched/fair: Fix enqueue_task_fair warning some more
The recent patch, fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
did not fully resolve the issues with the rq->tmp_alone_branch !=
&rq->leaf_cfs_rq_list warning in enqueue_task_fair. There is a case where
the first for_each_sched_entity loop exits due to on_rq, having incompletely
updated the list. In this case the second for_each_sched_entity loop can
further modify se. The later code to fix up the list management fails to do
what is needed because se does not point to the sched_entity which broke out
of the first loop. The list is not fixed up because the throttled parent was
already added back to the list by a task enqueue in a parallel child hierarchy.
Address this by calling list_add_leaf_cfs_rq if there are throttled parents
while doing the second for_each_sched_entity loop.
Fixes: fe61468b2cb ("sched/fair: Fix enqueue_task_fair warning")
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200512135222.GC2201@lorien.usersys.redhat.com
Few cpsw related dts fixes for omaps
Recent cpsw driver changes exposed few regressions in the cpsw related
dts configuration that would be good to fix:
- Few more boards still need to be updated to use rgmii-rxid phy caused
by the fallout from commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode
support for the KSZ9031 PHY" as the rx delay is now disabled unless we
use rgmii-rxid.
- On dm814x we have been using a wrong clock for mdio that now can produce
external abort on some boards
* tag 'omap-for-v5.7/cpsw-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
Link: https://lore.kernel.org/r/pull-1589472123-367692@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.
Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.
Although fixes for those are in development, they're not -rc material.
There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.
So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.
Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au
Pull EFI fixes from Thomas Gleixner:
"A set of EFI fixes:
- Don't return a garbage screen info when EFI framebuffer is not
available
- Make the early EFI console work properly with wider fonts instead
of drawing garbage
- Prevent a memory buffer leak in allocate_e820()
- Print the firmware error record properly so it can be decoded by
users
- Fix a symbol clash in the host tool build which only happens with
newer compilers.
- Add a missing check for the event log version of TPM which caused
boot failures on several Dell systems due to an attempt to decode
SHA-1 format with the crypto agile algorithm"
* tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tpm: check event log version before reading final events
efi: Pull up arch-specific prototype efi_systab_show_arch()
x86/boot: Mark global variables as static
efi: cper: Add support for printing Firmware Error Record Reference
efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820()
efi/earlycon: Fix early printk for wider fonts
efi/libstub: Avoid returning uninitialized data from setup_graphics()
It's possible for the VFS to completely forget about an inode, but for
it to still be sitting on the cap release queue. If the MDS sends the
client a cap message for such an inode, it just ignores it today, which
can lead to a stall of up to 5s until the cap release queue is flushed.
If we get a cap message for an inode that can't be located, then go
ahead and flush the cap release queue.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/45532
Fixes: 1e9c2eb6811e ("ceph: delete stale dentry when last reference is dropped")
Reported-and-Tested-by: Andrej Filipčič <andrej.filipcic@ijs.si>
Suggested-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.7, please pull the following:
- Vincent fixes the polarity of the ACT LED on the Raspberry Pi Zero W
board
- Hamish fixes the ARM PPI interrupts sensitivy for the Hurricane 2
SoCs
* tag 'arm-soc/for-5.7/devicetree-fixes-part2-v2' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: HR2: Fix PPI interrupt types
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
Link: https://lore.kernel.org/r/20200524203714.17035-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Recent PTP-specific cpsw driver changes started exposing an issue on at
at least j5eco-evm:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xf0169004
...
(davinci_mdio_runtime_suspend) from [<c063f2a4>] (__rpm_callback+0x84/0x154)
(__rpm_callback) from [<c063f394>] (rpm_callback+0x20/0x80)
(rpm_callback) from [<c063f4f0>] (rpm_suspend+0xfc/0x6ac)
(rpm_suspend) from [<c0640af0>] (pm_runtime_work+0x88/0xa4)
(pm_runtime_work) from [<c0155338>] (process_one_work+0x228/0x568)
...
Let's fix the issue by using the correct mdio clock as suggested by
Grygorii Strashko <grygorii.strashko@ti.com>.
The DM814_ETHERNET_CPGMAC0_CLKCTRL clock is the interconnect target module
clock and managed by ti-sysc.
Fixes: 6398f3478e45 ("ARM: dts: Configure interconnect target module for dm814x cpsw")
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Propagate the error code returned by devm_platform_ioremap_resource()
out of probe() instead of overwriting it.
Fixes: 72d8cb715477 ("drivers: gpio: bcm-kona: use devm_platform_ioremap_resource()")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This reverts commit 697ece78f8f749aeea40f2711389901f0974017a.
The implementation of SWAP on powerpc requires page protection
bits to not be one of the least significant PTE bits.
Until the SWAP implementation is changed and this requirement voids,
we have to keep at least _PAGE_RW outside of the 3 last bits.
For now, revert to previous PTE bits order. A further rework
may come later.
Fixes: 697ece78f8f7 ("powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits.")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b34706f8de87f84d135abb5f3ede6b6f16fb1f41.1589969799.git.christophe.leroy@csgroup.eu
Currently add nat mangle action with comparing invert and orig tuple.
It is better to check IPS_NAT_MASK flags first to avoid non necessary
memcmp for non-NAT conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we remote the msk from the token container only
via mptcp_close(). The MPTCP master socket can be destroyed
also via other paths (e.g. if not yet accepted, when shutting
down the listener socket). When we hit the latter scenario,
dangling msk references are left into the token container,
leading to memory corruption and/or UaF.
This change addresses the issue by moving the token removal
into the msk destructor.
Fixes: 79c0949e9a09 ("mptcp: Add key generation and token tree")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull IPMI update from Corey Minyard:
"Convert i2c_new_device() to i2c_new_client_device()
Wolfram Sang has asked to have this included in 5.7 so the deprecated
API can be removed next release. There should be no functional
difference.
I think that entire this section of code can be removed; it is
leftover from other things that have since changed, but this is the
safer thing to do for now. The full removal can happen next release"
* tag 'for-linus-5.7-2' of git://github.com/cminyard/linux-ipmi:
char: ipmi: convert to use i2c_new_client_device()
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Unbreak stack dumps for inactive tasks by interpreting the special
first frame left by __switch_to_asm() correctly.
The recent change not to skip the first frame so ORC and frame
unwinder behave in the same way caused all entries to be
unreliable, i.e. prepended with '?'.
- Use cpumask_available() instead of an implicit NULL check of a
cpumask_var_t in mmio trace to prevent a Clang build warning"
* tag 'x86-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks
x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables
Pull EFI fixes from Ard Biesheuvel:
"- fix EFI framebuffer earlycon for wide fonts
- avoid filling screen_info with garbage if the EFI framebuffer is not
available
- fix a potential host tool build error due to a symbol clash on x86
- work around a EFI firmware bug regarding the binary format of the TPM
final events table
- fix a missing memory free by reworking the E820 table sizing routine to
not do the allocation in the first place
- add CPER parsing for firmware errors"
This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file. But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.
This was entirely scripted:
./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix several issues in the previous gfs2_find_jhead fix:
* When updating @blocks_submitted, @block refers to the first block block not
submitted yet, not the last block submitted, so fix an off-by-one error.
* We want to ensure that @blocks_submitted is far enough ahead of @blocks_read
to guarantee that there is in-flight I/O. Otherwise, we'll eventually end up
waiting for pages that haven't been submitted, yet.
* It's much easier to compare the number of blocks added with the number of
blocks submitted to limit the maximum bio size.
* Even with bio chaining, we can keep adding blocks until we reach the maximum
bio size, as long as we stop at a page boundary. This simplifies the logic.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
OSD client should ignore cache/overlay flag if got redirect reply.
Otherwise, the client hangs when the cache tier is in forward mode.
[ idryomov: Redirects are effectively deprecated and no longer
used or tested. The original tiering modes based on redirects
are inherently flawed because redirects can race and reorder,
potentially resulting in data corruption. The new proxy and
readproxy tiering modes should be used instead of forward and
readforward. Still marking for stable as obviously correct,
though. ]
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/23296
URL: https://tracker.ceph.com/issues/36406
Signed-off-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
These error messages are output when booting on a BCM HR2 system:
GIC: PPI11 is secure or misconfigured
GIC: PPI13 is secure or misconfigured
Per ARM documentation these interrupts are triggered on a rising edge.
See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
Section 3.3.8 Interrupt Configuration Registers.
The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
("ARM: dts: NSP: Fix PPI interrupt types").
Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY") the networking is broken on boards:
am437x-gp-evm
am437x-sk-evm
am437x-idk-evm
All above boards have phy-mode = "rgmii" and this is worked before, because
KSZ9031 PHY started with default RGMII internal delays configuration (TX
off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
KSZ9031 PHY starts handling phy mode properly and disables RX delay, as
result networking is become broken.
Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
behavior.
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Currently we emit the REQUESTED line state event after the line is
requested but before the flags are configured. This is obviously wrong
as we want to pass the updated lineinfo to user-space together with the
event.
Since the flags can be configured in different ways depending on how the
line is being requested - we need to call the notifier chain in different
places separately.
Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Fixes: 542c25b7a209 ("drivers: gpio: pxa: use devm_platform_ioremap_resource()")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
When CONFIG_VIRT_CPU_ACCOUNTING is selected, system call exception
handler doesn't fit below 0xd00 and build fails.
As exception 0xd00 doesn't exist and is never generated by 40x,
comment it out in order to get more space for system call exception.
Fixes: 9e27086292aa ("powerpc/32: Warn and return ENOSYS on syscalls from kernel")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/633165d72f75b4ef4c0901aebe99d3915c93e9a2.1589043863.git.christophe.leroy@csgroup.eu
When devinet_sysctl_register() failed, the memory allocated
in neigh_parms_alloc() should be freed.
Fixes: 20e61da7ffcf ("ipv4: fail early when creating netdev named all or default")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a MP_JOIN subflow completes the 3whs while another
CPU is closing the master msk, we can hit the
following race:
CPU1 CPU2
close()
mptcp_close
subflow_syn_recv_sock
mptcp_token_get_sock
mptcp_finish_join
inet_sk_state_load
mptcp_token_destroy
inet_sk_state_store(TCP_CLOSE)
__mptcp_flush_join_list()
mptcp_sock_graft
list_add_tail
sk_common_release
sock_orphan()
<socket free>
The MP_JOIN socket will be leaked. Additionally we can hit
UaF for the msk 'struct socket' referenced via the 'conn'
field.
This change try to address the issue introducing some
synchronization between the MP_JOIN 3whs and mptcp_close
via the join_list spinlock. If we detect the msk is closing
the MP_JOIN socket is closed, too.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull clk fixes from Stephen Boyd:
"Some more clk driver fixes and one core framework fix:
- A handful of TI driver fixes for bad of_node_put() and incorrect
parent names
- Rockchip rk3228 aclk_gpu* creation was interfering with lima GPU
work so we use a composite clk now
- Resuming from suspend on Tegra Jetson TK1 was broken because an
audio PLL calculated an incorrect rate
- A fix for devicetree probing on IM-PD1 by actually specifying a clk
name which is required to pass clk registration
- Avoid list corruption if registration fails for a critical clk"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: convert subclocks to use proper names also
clk: ti: am33xx: fix RTC clock parent
clk: ti: clkctrl: Fix Bad of_node_put within clkctrl_get_name
clk: tegra: Fix initial rate for pll_a on Tegra124
clk: impd1: Look up clock-output-names
clk: Unlink clock if failed to prepare or enable
clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks