Pull SCSI fixes from James Bottomley:
"Five small and fairly minor fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_devinfo: Add blacklist entry for HPE OPEN-V
scsi: ufs: ufs-mediatek: Fix HCI version in some platforms
scsi: qedf: Do not put host in qedf_vport_create() unconditionally
scsi: lpfc: Fix failure to transmit ABTS on FC link
scsi: target: core: Fix warning on realtime kernels

Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Only advertise encrypted_casefold when encryption and unicode are enabled
ext4: fix no-key deletion for encrypt+casefold
ext4: fix memory leak in ext4_fill_super
ext4: fix fast commit alignment issues
ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed
ext4: fix accessing uninit percpu counter variable with fast_commit
ext4: fix memory leak in ext4_mb_init_backend on error path.

Apparently some arrays are now returning "HPE" as the vendor.

Link: https://lore.kernel.org/r/20210601175214.25719-1-emilne@redhat.com
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have been coming in over the last few weeks, the
usual mix of fixes:

- DT fixups for TI K3

- SATA drive detection fix for TI DRA7

- Power management fixes and a few build warning removals for OMAP

- OP-TEE fix to use standard API for UUID exporting

- DT fixes for a handful of i.MX boards

And a few other smaller items"

* tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
arm64: meson: select COMMON_CLK
soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()
ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
ARM: dts: imx7d-pico: Fix the 'tuning-step' property
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
ARM: imx: pm-imx27: Include "common.h"
arm64: dts: zii-ultra: fix 12V_MAIN voltage
arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
arm64: dts: ls1028a: fix memory node
bus: ti-sysc: Fix am335x resume hang for usb otg module
ARM: OMAP2+: Fix build warning when mmc_omap is not built
ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
ARM: OMAP1: Fix use of possibly uninitialized irq variable
optee: use export_uuid() to copy client UUID
arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
...

Encrypted casefolding is only supported when both encryption and
casefolding are both enabled in the config.

Fixes: 471fbbea7ff7 ("ext4: handle casefolding with encryption")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210603094849.314342-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Some MediaTek SoC platforms with UFSHCI version below 3.0 have incorrect
UFSHCI versions showed in register map.

Fix the version by referring to UniPro version which is always correct.

Link: https://lore.kernel.org/r/20210531062642.12642-1-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull powerpc fixes from Michael Ellerman:
"Fix our KVM reverse map real-mode handling since we enabled huge
vmalloc (in some configurations).

Revert a recent change to our IOMMU code which broke some devices.

Fix KVM handling of FSCR on P7/P8, which could have possibly let a
guest crash it's Qemu.

Fix kprobes validation of prefixed instructions across page boundary.

Thanks to Alexey Kardashevskiy, Christophe Leroy, Fabiano Rosas,
Frederic Barrat, Naveen N. Rao, and Nicholas Piggin"

* tag 'powerpc-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs"
KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path
powerpc: Fix reverse map real-mode address lookup with huge vmalloc
powerpc/kprobes: Fix validation of prefixed instructions across page boundary

Devicetree fixes for TI K3 platforms for v5.13 merge window:

These minor fixes include:
* Fixups for device tree discovered during yaml conversion
* Fixups for missing dma-coherent property in j7200
* Removal of camera sensor node from am65 evm dts to overlay
as camera sensor boards are variable.

* tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
arm64: dts: ti: k3-*: Rename the TI-SCI node
arm64: dts: ti: k3-am65-wakeup: Drop un-necessary properties from dmsc node
arm64: dts: ti: k3-am65-wakeup: Add debug region to TI-SCI node
arm64: dts: ti: k3-*: Rename the TI-SCI clocks node name
arm64: dts: ti: j7200-main: Mark Main NAVSS as dma-coherent
arm64: dts: ti: k3-am654-base-board: remove ov5640

Link: https://lore.kernel.org/r/20210518115634.467vgpbzplal5kou@obituary
Signed-off-by: Olof Johansson <olof@lixom.net>

commit 471fbbea7ff7 ("ext4: handle casefolding with encryption") is
missing a few checks for the encryption key which are needed to
support deleting enrypted casefolded files when the key is not
present.

This bug made it impossible to delete encrypted+casefolded directories
without the encryption key, due to errors like:

W : EXT4-fs warning (device vdc): __ext4fs_dirhash:270: inode #49202: comm Binder:378_4: Siphash requires key

Repro steps in kvm-xfstests test appliance:
mkfs.ext4 -F -E encoding=utf8 -O encrypt /dev/vdc
mount /vdc
mkdir /vdc/dir
chattr +F /vdc/dir
keyid=$(head -c 64 /dev/zero | xfs_io -c add_enckey /vdc | awk '{print $NF}')
xfs_io -c "set_encpolicy $keyid" /vdc/dir
for i in `seq 1 100`; do
mkdir /vdc/dir/$i
done
xfs_io -c "rm_enckey $keyid" /vdc
rm -rf /vdc/dir # fails with the bug

Fixes: 471fbbea7ff7 ("ext4: handle casefolding with encryption")
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210522004132.2142563-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Do not drop reference count on vn_port->host in qedf_vport_create()
unconditionally. Instead drop the reference count in qedf_vport_destroy().

Link: https://lore.kernel.org/r/20210521143440.84816-1-dwagner@suse.de
Reported-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull x86 fixes from Borislav Petkov:
"A bunch of x86/urgent stuff accumulated for the last two weeks so
lemme unload it to you.

It should be all totally risk-free, of course. :-)

- Fix out-of-spec hardware (1st gen Hygon) which does not implement
MSR_AMD64_SEV even though the spec clearly states so, and check
CPUID bits first.

- Send only one signal to a task when it is a SEGV_PKUERR si_code
type.

- Do away with all the wankery of reserving X amount of memory in the
first megabyte to prevent BIOS corrupting it and simply and
unconditionally reserve the whole first megabyte.

- Make alternatives NOP optimization work at an arbitrary position
within the patched sequence because the compiler can put
single-byte NOPs for alignment anywhere in the sequence (32-bit
retpoline), vs our previous assumption that the NOPs are only
appended.

- Force-disable ENQCMD[S] instructions support and remove
update_pasid() because of insufficient protection against FPU state
modification in an interrupt context, among other xstate horrors
which are being addressed at the moment. This one limits the
fallout until proper enablement.

- Use cpu_feature_enabled() in the idxd driver so that it can be
build-time disabled through the defines in disabled-features.h.

- Fix LVT thermal setup for SMI delivery mode by making sure the APIC
LVT value is read before APIC initialization so that softlockups
during boot do not happen at least on one machine.

- Mark all legacy interrupts as legacy vectors when the IO-APIC is
disabled and when all legacy interrupts are routed through the PIC"

* tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Check SME/SEV support in CPUID first
x86/fault: Don't send SIGSEGV twice on SEGV_PKUERR
x86/setup: Always reserve the first 1M of RAM
x86/alternative: Optimize single-byte NOPs at an arbitrary position
x86/cpufeatures: Force disable X86_FEATURE_ENQCMD and remove update_pasid()
dmaengine: idxd: Use cpu_feature_enabled()
x86/thermal: Fix LVT thermal setup for SMI delivery mode
x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing

This reverts commit 3c0468d4451eb6b4f6604370639f163f9637a479.

That commit was breaking alignment guarantees for the DMA address when
allocating coherent mappings, as described in
Documentation/core-api/dma-api-howto.rst

It was also noticed by Mellanox' driver:
[ 1515.763621] mlx5_core c002:01:00.0: mlx5_frag_buf_alloc_node:146:(pid 13402): unexpected map alignment: 0x0800000000c61000, page_shift=16
[ 1515.763635] mlx5_core c002:01:00.0: mlx5_cqwq_create:181:(pid
13402): mlx5_frag_buf_alloc_node() failed, -12

Fixes: 3c0468d4451e ("powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526144540.117795-1-fbarrat@linux.ibm.com

OP-TEE use export_uuid() to copy UUID

* tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: use export_uuid() to copy client UUID

Link: https://lore.kernel.org/r/20210518100712.GA449561@jade
Signed-off-by: Olof Johansson <olof@lixom.net>

Interrupt routers are memory mapped peripherals, that are organized
in our dts bus hierarchy to closely represents the actual hardware
behavior.

However, without explicitly calling out the reg property, using
2021.03+ dt-schema package, this exposes the following problem with
dtbs_check:

/arch/arm64/boot/dts/ti/k3-am654-base-board.dt.yaml: bus@100000:
interrupt-controller0: {'type': 'object'} is not allowed for
{'compatible': ['ti,sci-intr'], .....

Even though we don't use interrupt router directly via memory mapped
registers and have to use it via the system controller, the hardware
block is memory mapped, so describe the base address in device tree.

This is a valid, comprehensive description of hardware and permitted
by the existing ti,sci-intr schema.

Reviewed-by: Tero Kristo <kristo@kernel.org>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210511194821.13919-1-nm@ti.com

Buffer head references must be released before calling kill_bdev();
otherwise the buffer head (and its page referenced by b_data) will not
be freed by kill_bdev, and subsequently that bh will be leaked.

If blocksizes differ, sb_set_blocksize() will kill current buffers and
page cache by using kill_bdev(). And then super block will be reread
again but using correct blocksize this time. sb_set_blocksize() didn't
fully free superblock page and buffer head, and being busy, they were
not freed and instead leaked.

This can easily be reproduced by calling an infinite loop of:

systemctl start <ext4_on_lvm>.mount, and
systemctl stop <ext4_on_lvm>.mount

... since systemd creates a cgroup for each slice which it mounts, and
the bh leak get amplified by a dying memory cgroup that also never
gets freed, and memory consumption is much more easily noticed.

Fixes: ce40733ce93d ("ext4: Check for return value from sb_set_blocksize")
Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3")
Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.com
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

The abort_cmd_ia flag in an abort wqe describes whether an ABTS basic link
service should be transmitted on the FC link or not. Code added in
lpfc_sli4_issue_abort_iotag() set the abort_cmd_ia flag incorrectly,
surpressing ABTS transmission.

A previous LPFC change to build an abort wqe inverted prior logic that
determined whether an ABTS was to be issued on the FC link.

Revert this logic to its proper state.

Link: https://lore.kernel.org/r/20210528212240.11387-1-jsmart2021@gmail.com
Fixes: db7531d2b377 ("scsi: lpfc: Convert abort handling to SLI-3 and SLI-4 handlers")
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull i2c fixes from Wolfram Sang:
"Some more bugfixes from I2C for v5.13. Usual stuff"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops
i2c: qcom-geni: Add shutdown callback for i2c
i2c: tegra-bpmp: Demote kernel-doc abuses
i2c: altera: Fix formatting issue in struct and demote unworthy kernel-doc headers

The first two bits of the CPUID leaf 0x8000001F EAX indicate whether SEV
or SME is supported, respectively. It's better to check whether SEV or
SME is actually supported before accessing the MSR_AMD64_SEV to check
whether SEV or SME is enabled.

This is both a bare-metal issue and a guest/VM issue. Since the first
generation Hygon Dhyana CPU doesn't support the MSR_AMD64_SEV, reading that
MSR results in a #GP - either directly from hardware in the bare-metal
case or via the hypervisor (because the RDMSR is actually intercepted)
in the guest/VM case, resulting in a failed boot. And since this is very
early in the boot phase, rdmsrl_safe()/native_read_msr_safe() can't be
used.

So check the CPUID bits first, before accessing the MSR.

[ tlendacky: Expand and improve commit message. ]
[ bp: Massage commit message. ]

Fixes: eab696d8e8b9 ("x86/sev: Do not require Hypervisor CPUID bit for SEV guests")
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@vger.kernel.org> # v5.10+
Link: https://lkml.kernel.org/r/20210602070207.2480-1-puwen@hygon.cn

Similar to commit 25edcc50d76c ("KVM: PPC: Book3S HV: Save and restore
FSCR in the P9 path"), ensure the P7/8 path saves and restores the host
FSCR. The logic explained in that patch actually applies there to the
old path well: a context switch can be made before kvmppc_vcpu_run_hv
restores the host FSCR and returns.

Now both the p9 and the p7/8 paths now save and restore their FSCR, it
no longer needs to be restored at the end of kvmppc_vcpu_run_hv

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs")
Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526125851.3436735-1-npiggin@gmail.com

PM and build warning fixes for omaps

While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:

- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded

Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.

These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.

* tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
bus: ti-sysc: Fix am335x resume hang for usb otg module
ARM: OMAP2+: Fix build warning when mmc_omap is not built
ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
ARM: OMAP1: Fix use of possibly uninitialized irq variable

Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>

Prior to this patch optee_open_session() was making assumptions about
the internal format of uuid_t by casting a memory location in a
parameter struct to uuid_t *. Fix this using export_uuid() to get a well
defined binary representation and also add an octets field in struct
optee_msg_param in order to avoid casting.

Fixes: c5b4312bea5d ("tee: optee: Add support for session login client UUID generation")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Instead of using empty ranges property, lets map explicitly the address
range that is mapped onto the dma / navigator subsystems (navss/dmss).

This is also exposed via the dtbs_check with dt-schema newer than
2021.03 version by throwing out following:
arch/arm64/boot/dts/ti/k3-am654-base-board.dt.yaml: bus@100000: main-navss:
{'type': 'object'} is not allowed for
{'compatible': ['simple-mfd'], '#address-cells': [[2]], .....

This has already been correctly done for J7200, however was missed for
other k3 SoCs. Fix that oversight.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20210510145429.8752-1-nm@ti.com

Fast commit recovery data on disk may not be aligned. So, when the
recovery code reads it, this patch makes sure that fast commit info
found on-disk is first memcpy-ed into an aligned variable before
accessing it. As a consequence of it, we also remove some macros that
could resulted in unaligned accesses.

Cc: stable@kernel.org
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210519215920.2037527-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the
interrupts, a call to irqs_disabled() will return false thus firing a
warning in __transport_wait_for_tasks().

Remove the warning and also replace assert_spin_locked() with
lockdep_assert_held()

Link: https://lore.kernel.org/r/20210531121326.3649-1-mlombard@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Merge misc fixes from Andrew Morton:
"13 patches.

Subsystems affected by this patch series: mips, mm (kfence, debug,
pagealloc, memory-hotplug, hugetlb, kasan, and hugetlb), init, proc,
lib, ocfs2, and mailmap"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: use private address for Michel Lespinasse
ocfs2: fix data corruption by fallocate
lib: crc64: fix kernel-doc warning
mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY
mm/kasan/init.c: fix doc warning
proc: add .gitignore for proc-subset-pid selftest
hugetlb: pass head page to remove_hugetlb_page()
drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64
mm/page_alloc: fix counting of free pages after take off from buddy
mm/debug_vm_pgtable: fix alignment for pmd/pud_advanced_tests()
pid: take a reference when initializing `cad_pid`
kfence: use TASK_IDLE when awaiting allocation
Revert "MIPS: make userspace mapping young by default"

Mark bus as suspended during system suspend to block the future
transfers. Implement geni_i2c_resume_noirq() to resume the bus.

Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

__bad_area_nosemaphore() calls both force_sig_pkuerr() and
force_sig_fault() when handling SEGV_PKUERR. This does not cause
problems because the second signal is filtered by the legacy_queue()
check in __send_signal() because in both cases, the signal is SIGSEGV,
the second one seeing that the first one is already pending.

This causes the kernel to do unnecessary work so send the signal only
once for SEGV_PKUERR.

[ bp: Massage commit message. ]

Fixes: 9db812dbb29d ("signal/x86: Call force_sig_pkuerr from __bad_area_nosemaphore")
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jiashuo Liang <liangjs@pku.edu.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/20210601085203.40214-1-liangjs@pku.edu.cn

real_vmalloc_addr() does not currently work for huge vmalloc, which is
what the reverse map can be allocated with for radix host, hash guest.

Extract the hugepage aware equivalent from eeh code into a helper, and
convert existing sites including this one to use it.

Fixes: 8abddd968a30 ("powerpc/64s/radix: Enable huge vmalloc mappings")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526120005.3432222-1-npiggin@gmail.com

Regression fix for TI dra7 SATA not detecting drives

The SATA quirk flags are no missing With recent removal of legacy
platform data and we need to add the quirk flags to detect drives.

* tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix missing quirk flags for sata

Link: https://lore.kernel.org/r/pull-1622613578-121536@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>

The ams_delta_camera_power() function is unused as reports
Clang compilation with omap1_defconfig on linux-next:

arch/arm/mach-omap1/board-ams-delta.c:462:12: warning: unused function 'ams_delta_camera_power' [-Wunused-function]
static int ams_delta_camera_power(struct device *dev, int power)
^
1 warning generated.

The soc_camera support was dropped without removing
ams_delta_camera_power() function, making it unused.

Fixes: ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies")
Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1326

Lets rename the node name of TI-SCI node to be system-controller as it
is a better standardized name for the function that TI-SCI plays in the
SoC.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210510145033.7426-5-nm@ti.com

We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975] ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368] ext4_find_extent+0x300/0x330 [ext4]
[130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995] ext4_readpage+0x54/0x100 [ext4]
[130747.337359] generic_file_buffered_read+0x410/0xae8
[130747.337767] generic_file_read_iter+0x114/0x190
[130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556] __vfs_read+0x11c/0x188
[130747.338851] vfs_read+0x94/0x150
[130747.339110] ksys_read+0x74/0xf0

This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable). Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.

TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.

WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:

NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR qlt_reset+0x68/0x220 [qla2xxx]
Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]
Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]
qla2x00_iocb_work_fn

The patch fixes the issue by serializing qlt_stop_phase1() and
qlt_stop_phase2() functions to make WWPN removal wait for phase1
completion.

Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull RISC-V fixes from Palmer Dabbelt:

- Build with '-mno-relax' when using LLVM's linker, which doesn't
support linker relaxation.

- A fix to build without SiFive's errata.

- A fix to use PAs during init_resources()

- A fix to avoid W+X mappings during boot.

* tag 'riscv-for-linus-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix memblock_free() usages in init_resources()
riscv: skip errata_cip_453.o if CONFIG_ERRATA_SIFIVE_CIP_453 is disabled
riscv: mm: Fix W+X mappings at boot
riscv: Use -mno-relax when using lld linker

Link: https://lkml.kernel.org/r/20210602221225.49446-1-michel@lespinasse.org
Signed-off-by: Michel Lespinasse <michel@lespinasse.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the hardware is still accessing memory after SMMU translation
is disabled (as part of smmu shutdown callback), then the
IOVAs (I/O virtual address) which it was using will go on the bus
as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.

So, implement shutdown callback for i2c driver to suspend the bus
during system "reboot" or "shutdown".

Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

There are BIOSes that are known to corrupt the memory under 1M, or more
precisely under 640K because the memory above 640K is anyway reserved
for the EGA/VGA frame buffer and BIOS.

To prevent usage of the memory that will be potentially clobbered by the
kernel, the beginning of the memory is always reserved. The exact size
of the reserved area is determined by CONFIG_X86_RESERVE_LOW build time
and the "reservelow=" command line option. The reserved range may be
from 4K to 640K with the default of 64K. There are also configurations
that reserve the entire 1M range, like machines with SandyBridge graphic
devices or systems that enable crash kernel.

In addition to the potentially clobbered memory, EBDA of unknown size may
be as low as 128K and the memory above that EBDA start is also reserved
early.

It would have been possible to reserve the entire range under 1M unless for
the real mode trampoline that must reside in that area.

To accommodate placement of the real mode trampoline and keep the memory
safe from being clobbered by BIOS, reserve the first 64K of RAM before
memory allocations are possible and then, after the real mode trampoline
is allocated, reserve the entire range from 0 to 1M.

Update trim_snb_memory() and reserve_real_mode() to avoid redundant
reservations of the same memory range.

Also make sure the memory under 1M is not getting freed by
efi_free_boot_services().

[ bp: Massage commit message and comments. ]

Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Hugh Dickins <hughd@google.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213177
Link: https://lkml.kernel.org/r/20210601075354.5149-2-rppt@kernel.org

When checking if the probed instruction is the suffix of a prefixed
instruction, we access the instruction at the previous word. If the
probed instruction is the very first word of a module, we can end up
trying to access an invalid page.

Fix this by skipping the check for all instructions at the beginning of
a page. Prefixed instructions cannot cross a 64-byte boundary and as
such, we don't expect to encounter a suffix as the very first word in a
page for kernel text. Even if there are prefixed instructions crossing
a page boundary (from a module, for instance), the instruction will be
illegal, so preventing probing on the suffix of such prefix instructions
isn't worthwhile.

Fixes: b4657f7650ba ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0df9a032a05576a2fa8e97d1b769af2ff0eafbd6.1621416666.git.naveen.n.rao@linux.vnet.ibm.com

Amlogic fixes for v5.13-rc1
- arm64: meson: select COMMON_CLK to select a proper implementation of the clock API
- soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()

* tag 'amlogic-fixes-v5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: meson: select COMMON_CLK
soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()

Link: https://lore.kernel.org/r/73e76706-f3f4-bebf-10dd-d2ec9106a234@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>

Naresh Kamboju <naresh.kamboju@linaro.org> reported that Beaglebone-X15
does not detect sata drives any longer after dra7 was flipped to boot with
device tree data only. Turns out we are now missing the sata related quirk
flags in ti-sysc that we used to have earlier.

Fixes: 98feab31ac49 ("ARM: OMAP2+: Drop legacy platform data for dra7 sata")
Fixes: 21206c8f2cb5 ("ARM: OMAP2+: Drop legacy platform data for omap5 sata")
Link: https://lore.kernel.org/regressions/CA+G9fYtTN6ug3eBAW3wMcDeESUo+ebj7L5HBe5_fj4uqDExFQg@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Looks like the swsup_sidle_act quirk handling is unreliable for serial
ports. The serial ports just eventually stop idling until woken up and
re-idled again. As the serial port not idling blocks any deeper SoC idle
states, it's adds an annoying random flakeyness for power management.

Let's just switch to swsup_sidle quirk instead like we already do for
omap3 uarts. This means we manually idle the port instead of trying to
use the hardware autoidle features when not in use.

For more details on why the serial ports have been using swsup_idle_act,
see commit 66dde54e978a ("ARM: OMAP2+: hwmod-data: UART IP needs software
control to manage sidle modes"). It seems that the swsup_idle_act quirk
handling is not enough though, and for example the TI Android kernel
changed to using swsup_sidle with commit 77c34c84e1e0 ("OMAP4: HWMOD:
UART1: disable smart-idle.").

Fixes: b4a9a7a38917 ("bus: ti-sysc: Handle swsup idle mode quirks")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit b9d79e4ca4ff ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.

It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:

drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
^

Fix it.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The DMSC node does'nt require any of "#address-cells", "#size-cells"
or "ranges" property as the child nodes are representations of SoC's
system controller itself, so align it with the bindings.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210510145033.7426-4-nm@ti.com

When running generic/527 with fast_commit configuration, the following
issue is seen on Power. With fast_commit, during ext4_fc_replay()
(which can be called from ext4_fill_super()), if inode eviction
happens then it can access an uninitialized percpu counter variable.

This patch adds the check before accessing the counters in
ext4_free_inode() path.

[ 321.165371] run fstests generic/527 at 2021-04-29 08:38:43
[ 323.027786] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: block_validity. Quota mode: none.
[ 323.618772] BUG: Unable to handle kernel data access on read at 0x1fbd80000
[ 323.619767] Faulting instruction address: 0xc000000000bae78c
cpu 0x1: Vector: 300 (Data Access) at [c000000010706ef0]
pc: c000000000bae78c: percpu_counter_add_batch+0x3c/0x100
lr: c0000000006d0bb0: ext4_free_inode+0x780/0xb90
pid = 5593, comm = mount
ext4_free_inode+0x780/0xb90
ext4_evict_inode+0xa8c/0xc60
evict+0xfc/0x1e0
ext4_fc_replay+0xc50/0x20f0
do_one_pass+0xfe0/0x1350
jbd2_journal_recover+0x184/0x2e0
jbd2_journal_load+0x1c0/0x4a0
ext4_fill_super+0x2458/0x4200
mount_bdev+0x1dc/0x290
ext4_mount+0x28/0x40
legacy_get_tree+0x4c/0xa0
vfs_get_tree+0x4c/0x120
path_mount+0xcf8/0xd70
do_mount+0x80/0xd0
sys_mount+0x3fc/0x490
system_call_exception+0x384/0x3d0
system_call_common+0xec/0x278

Cc: stable@kernel.org
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/6cceb9a75c54bef8fa9696c1b08c8df5ff6169e2.1619692410.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

irqs allocated with devm_request_irq() should not be freed using
free_irq(). Doing so causes a dangling pointer and a subsequent double
free.

Link: https://lore.kernel.org/r/20210519130519.2661938-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless, netfilter and
wireguard trees.

The bpf vs lockdown+audit fix is the most notable.

Things haven't slowed down just yet, both in terms of regressions in
current release and largish fixes for older code, but we usually see a
slowdown only after -rc5.

Current release - regressions:

- virtio-net: fix page faults and crashes when XDP is enabled

- mlx5e: fix HW timestamping with CQE compression, and make sure they
are only allowed to coexist with capable devices

- stmmac:
- fix kernel panic due to NULL pointer dereference of
mdio_bus_data
- fix double clk unprepare when no PHY device is connected

Current release - new code bugs:

- mt76: a few fixes for the recent MT7921 devices and runtime power
management

Previous releases - regressions:

- ice:
- track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx
- fix allowing VF to request more/less queues via virtchnl
- correct supported and advertised autoneg by using PHY
capabilities
- allow all LLDP packets from PF to Tx

- kbuild: quote OBJCOPY var to avoid a pahole call break the build

Previous releases - always broken:

- bpf, lockdown, audit: fix buggy SELinux lockdown permission checks

- mt76: address the recent FragAttack vulnerabilities not covered by
generic fixes

- ipv6: fix KASAN: slab-out-of-bounds Read in
fib6_nh_flush_exceptions

- Bluetooth:
- fix the erroneous flush_work() order, to avoid double free
- use correct lock to prevent UAF of hdev object

- nfc: fix NULL ptr dereference in llcp_sock_getname() after failed
connect

- ieee802154: multiple fixes to error checking and return values

- igb: fix XDP with PTP enabled

- intel: add correct exception tracing for XDP

- tls: fix use-after-free when TLS offload device goes down and back
up

- ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service

- netfilter: nft_ct: skip expectations for confirmed conntrack

- mptcp: fix falling back to TCP in presence of out of order packets
early in connection lifetime

- wireguard: switch from O(n) to a O(1) algorithm for maintaining
peers, fixing stalls and a large memory leak in the process

Misc:

- devlink: correct VIRTUAL port to not have phys_port attributes

- Bluetooth: fix VIRTIO_ID_BT assigned number

- net: return the correct errno code ENOBUF -> ENOMEM

- wireguard:
- peer: allocate in kmem_cache saving 25% on peer memory
- do not use -O3"

* tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: avoid link re-train during TC-MQPRIO configuration
sch_htb: fix refcount leak in htb_parent_to_leaf_offload
wireguard: allowedips: free empty intermediate nodes when removing single node
wireguard: allowedips: allocate nodes in kmem_cache
wireguard: allowedips: remove nodes in O(1)
wireguard: allowedips: initialize list head in selftest
wireguard: peer: allocate in kmem_cache
wireguard: use synchronize_net rather than synchronize_rcu
wireguard: do not use -O3
wireguard: selftests: make sure rp_filter is disabled on vethc
wireguard: selftests: remove old conntrack kconfig value
virtchnl: Add missing padding to virtchnl_proto_hdrs
ice: Allow all LLDP packets from PF to Tx
ice: report supported and advertised autoneg using PHY capabilities
ice: handle the VF VSI rebuild failure
ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared
ice: Fix allowing VF to request more/less queues via virtchnl
virtio-net: fix for skb_over_panic inside big mode
ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
fib: Return the correct errno code
...

This single commit is shared between fixes and for-next, as it fixes a
concrete bug while likely conflicting with a more invasive cleanup to
avoid these oddball mappings entirely.

* riscv/riscv-wx-mappings:
riscv: mm: Fix W+X mappings at boot

When fallocate punches holes out of inode size, if original isize is in
the middle of last cluster, then the part from isize to the end of the
cluster will be zeroed with buffer write, at that time isize is not yet
updated to match the new size, if writeback is kicked in, it will invoke
ocfs2_writepage()->block_write_full_page() where the pages out of inode
size will be dropped. That will cause file corruption. Fix this by
zero out eof blocks when extending the inode size.

Running the following command with qemu-image 4.2.1 can get a corrupted
coverted image file easily.

qemu-img convert -p -t none -T none -f qcow2 $qcow_image \
-O qcow2 -o compat=1.1 $qcow_image.conv

The usage of fallocate in qemu is like this, it first punches holes out
of inode size, then extend the inode size.

fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0
fallocate(11, 0, 2276196352, 65536) = 0

v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html
v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/

Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'i2c' not described in 'tegra_bpmp_serialize_i2c_msg'
drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'request' not described in 'tegra_bpmp_serialize_i2c_msg'
drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'msgs' not described in 'tegra_bpmp_serialize_i2c_msg'
drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'num' not described in 'tegra_bpmp_serialize_i2c_msg'
drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: expecting prototype for The serialized I2C format is simply the following(). Prototype was for tegra_bpmp_serialize_i2c_msg() instead
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'i2c' not described in 'tegra_bpmp_i2c_deserialize'
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'response' not described in 'tegra_bpmp_i2c_deserialize'
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'msgs' not described in 'tegra_bpmp_i2c_deserialize'
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'num' not described in 'tegra_bpmp_i2c_deserialize'
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: expecting prototype for The data in the BPMP(). Prototype was for tegra_bpmp_i2c_deserialize() instead

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Up until now the assumption was that an alternative patching site would
have some instructions at the beginning and trailing single-byte NOPs
(0x90) padding. Therefore, the patching machinery would go and optimize
those single-byte NOPs into longer ones.

However, this assumption is broken on 32-bit when code like
hv_do_hypercall() in hyperv_init() would use the ratpoline speculation
killer CALL_NOSPEC. The 32-bit version of that macro would align certain
insns to 16 bytes, leading to the compiler issuing a one or more
single-byte NOPs, depending on the holes it needs to fill for alignment.

That would lead to the warning in optimize_nops() to fire:

------------[ cut here ]------------
Not a NOP at 0xc27fb598
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/alternative.c:211 optimize_nops.isra.13

due to that function verifying whether all of the following bytes really
are single-byte NOPs.

Therefore, carve out the NOP padding into a separate function and call
it for each NOP range beginning with a single-byte NOP.

Fixes: 23c1ad538f4f ("x86/alternatives: Optimize optimize_nops()")
Reported-by: Richard Narron <richard@aaazen.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213301
Link: https://lkml.kernel.org/r/20210601212125.17145-1-bp@alien8.de

The scv implementation missed updating syscall return value and error
value get/set functions to deal with the changed register ABI. This
broke ptrace PTRACE_GET_SYSCALL_INFO as well as some kernel auditing
and tracing functions.

Fix. tools/testing/selftests/ptrace/get_syscall_info now passes when
scv is used.

Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: "Dmitry V. Levin" <ldv@altlinux.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520111931.2597127-2-npiggin@gmail.com

i.MX fixes for 5.13:

- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
pm code.
- A couple of patches from Fabio Estevam to fix 'tuning-step' property
in imx7d-meerkat96 and imx7d-pico DT.
- Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
- A couple of patches from Lucas Stach to fix regulator and voltage for
imx8mq-zii-ultra board.
- Add missing regulators for imx6q-dhcom to avoid possible instability
issues.
- Fix memory-controller settings for fsl-ls1028a DT.
- Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
boards.
- Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.

* tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
ARM: dts: imx7d-pico: Fix the 'tuning-step' property
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
ARM: imx: pm-imx27: Include "common.h"
arm64: dts: zii-ultra: fix 12V_MAIN voltage
arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
arm64: dts: ls1028a: fix memory node
ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch

Link: https://lore.kernel.org/r/20210527011758.GD8194@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>

This fix the recent removal of clock drivers selection.
While it is not necessary to select the clock drivers themselves, we need
to select a proper implementation of the clock API, which for the meson, is
CCF

Fixes: ba66a25536dd ("arm64: meson: ship only the necessary clock controllers")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210429083823.59546-1-jbrunet@baylibre.com

Use kzalloc rather than kcalloc(1,...)

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
@@

- kcalloc(1,
+ kzalloc(
...)
// </smpl>

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

On am335x, suspend and resume only works once, and the system hangs if
suspend is attempted again. However, turns out suspend and resume works
fine multiple times if the USB OTG driver for musb controller is loaded.

The issue is caused my the interconnect target module losing context
during suspend, and it needs a restore on resume to be reconfigure again
as debugged earlier by Dave Gerlach <d-gerlach@ti.com>.

There are also other modules that need a restore on resume, like gpmc as
noted by Dave. So let's add a common way to restore an interconnect
target module based on a quirk flag. For now, let's enable the quirk for
am335x otg only to fix the suspend and resume issue.

As gpmc is not causing hangs based on tests with BeagleBone, let's patch
gpmc separately. For gpmc, we also need a hardware reset done before
restore according to Dave.

To reinit the modules, we decouple system suspend from PM runtime. We
replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume()
with direct calls to internal functions and rely on the driver internal
state. There no point trying to handle complex system suspend and resume
quirks via PM runtime.

This is issue should have already been noticed with commit 1819ef2e2d12
("bus: ti-sysc: Use swsup quirks also for am335x musb") when quirk
handling was added for am335x otg for swsup. But the issue went unnoticed
as having musb driver loaded hides the issue, and suspend and resume works
once without the driver loaded.

Fixes: 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb")
Suggested-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.

amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification

radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing

msm:
- NULL ptr dereference fix

fbdev:
- procfs disabled warning fix

i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"

* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes

Lets add the TISCI debug region to TI-SCI region in line with TI-SCI
documentation[1]. While at it, lets rename the node to indicate the
address usage.

[1] http://downloads.ti.com/tisci/esd/latest/4_trace/trace.html

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210510145033.7426-3-nm@ti.com