Pull drm fixes from Dave Airlie:
"A pretty small pull request: a couple of AMD powerxpress regression
fixes and a power management fix, a couple of i915 fixes and one hdlcd
fix, along with one core don't oops because of incorrect API usage fix"

* tag 'drm-fixes-for-v4.9-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/i915: drop the struct_mutex when wedged or trying to reset
drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error
drm: Don't call drm_for_each_crtc with a non-KMS driver
drm/radeon: fix check for port PM availability
drm/amdgpu: fix check for port PM availability
drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgr
drm: hdlcd: Fix cleanup order

Merge more fixes from Andrew Morton:
"2 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, vmscan: add cond_resched() into shrink_node_memcg()
mm: workingset: fix NULL ptr in count_shadow_nodes

2 intel fixes.

* tag 'drm-intel-fixes-2016-12-01' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: drop the struct_mutex when wedged or trying to reset
drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error

When building a specific target such as bzImage, modules aren't normally
built. However if CONFIG_TRIM_UNUSED_KSYMS is enabled, no built modules
means none of the exported symbols are used and therefore they will all
be trimmed away from the final kernel. A subsequent "make modules" will
fail because modpost cannot find the needed symbols for those modules in
the kernel binary.

Let's make sure modules are also built whenever CONFIG_TRIM_UNUSED_KSYMS
is enabled and that the kernel binary is properly rebuilt accordingly.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Boris Zhmurov has reported RCU stalls during the kswapd reclaim:

INFO: rcu_sched detected stalls on CPUs/tasks:
23-...: (22 ticks this GP) idle=92f/140000000000000/0 softirq=2638404/2638404 fqs=23
(detected by 4, t=6389 jiffies, g=786259, c=786258, q=42115)
Task dump for CPU 23:
kswapd1 R running task 0 148 2 0x00000008
Call Trace:
shrink_node+0xd2/0x2f0
kswapd+0x2cb/0x6a0
mem_cgroup_shrink_node+0x160/0x160
kthread+0xbd/0xe0
__switch_to+0x1fa/0x5c0
ret_from_fork+0x1f/0x40
kthread_create_on_node+0x180/0x180

a closer code inspection has shown that we might indeed miss all the
scheduling points in the reclaim path if no pages can be isolated from
the LRU list. This is a pathological case but other reports from Donald
Buczek have shown that we might indeed hit such a path:

clusterd-989 [009] .... 118023.654491: mm_vmscan_direct_reclaim_end: nr_reclaimed=193
kswapd1-86 [001] dN.. 118023.987475: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239830 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118024.320968: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239844 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118024.654375: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239858 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118024.987036: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239872 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118025.319651: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239886 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118025.652248: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239900 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118025.984870: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239914 nr_taken=0 file=1
[...]
kswapd1-86 [001] dN.. 118084.274403: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4241133 nr_taken=0 file=1

this is minute long snapshot which didn't take a single page from the
LRU. It is not entirely clear why only 1303 pages have been scanned
during that time (maybe there was a heavy IRQ activity interfering).

In any case it looks like we can really hit long periods without
scheduling on non preemptive kernels so an explicit cond_resched() in
shrink_node_memcg which is independent on the reclaim operation is due.

Link: http://lkml.kernel.org/r/20161202095841.16648-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Boris Zhmurov <bb@kernelpanic.ru>
Tested-by: Boris Zhmurov <bb@kernelpanic.ru>
Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Reported-by: "Christopher S. Aker" <caker@theshore.net>
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

single drm fix.

* tag 'drm-misc-fixes-2016-11-30' of git://anongit.freedesktop.org/git/drm-misc:
drm: Don't call drm_for_each_crtc with a non-KMS driver

We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged
or a reset is in progress we bail early but never seem to actually
release the lock.

Fixes: 7f1847ebf48b ("drm/i915: Simplify checking of GPU reset_counter in display pageflips")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.7+
(cherry picked from commit ddbb271aea87fc6004d3c8bcdb0710e980c7ec85)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes for arm-soc in v4.9. None of
these are critical regressions, but it would be nice to still get them
merged.

- On the Juno platform, the idle latency was described wrong, leading
to suboptimal cpuidle tuning.

- Also on the same platform, PCI I/O space was set up incorrectly and
could not work.

- On the sti platform, a syntactically incorrect DT entry caused
warnings.

- The newly added 'gr8' platform has somewhat confusing file names,
which we rename for consistency"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions
arm64: dts: juno: Correct PCI IO window
ARM: dts: STiH407-family: fix i2c nodes
ARM: gr8: Rename the DTSI and relevant DTS

Commit 0a6b76dd23fa ("mm: workingset: make shadow node shrinker memcg
aware") has made the workingset shadow nodes shrinker memcg aware. The
implementation is not correct though because memcg_kmem_enabled() might
become true while we are doing a global reclaim when the sc->memcg might
be NULL which is exactly what Marek has seen:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000400
IP: [<ffffffff8122d520>] mem_cgroup_node_nr_lru_pages+0x20/0x40
PGD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 60 Comm: kswapd0 Tainted: G O 4.8.10-12.pvops.qubes.x86_64 #1
task: ffff880011863b00 task.stack: ffff880011868000
RIP: mem_cgroup_node_nr_lru_pages+0x20/0x40
RSP: e02b:ffff88001186bc70 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88001186bd20 RCX: 0000000000000002
RDX: 000000000000000c RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88001186bc70 R08: 28f5c28f5c28f5c3 R09: 0000000000000000
R10: 0000000000006c34 R11: 0000000000000333 R12: 00000000000001f6
R13: ffffffff81c6f6a0 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff880013c00000(0000) knlGS:ffff880013d00000
CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000400 CR3: 00000000122f2000 CR4: 0000000000042660
Call Trace:
count_shadow_nodes+0x9a/0xa0
shrink_slab.part.42+0x119/0x3e0
shrink_node+0x22c/0x320
kswapd+0x32c/0x700
kthread+0xd8/0xf0
ret_from_fork+0x1f/0x40
Code: 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 3b 35 dd eb b1 00 55 48 89 e5 73 2c 89 d2 31 c9 31 c0 4c 63 ce 48 0f a3 ca 73 13 <4a> 8b b4 cf 00 04 00 00 41 89 c8 4a 03 84 c6 80 00 00 00 83 c1
RIP mem_cgroup_node_nr_lru_pages+0x20/0x40
RSP <ffff88001186bc70>
CR2: 0000000000000400
---[ end trace 100494b9edbdfc4d ]---

This patch fixes the issue by checking sc->memcg rather than
memcg_kmem_enabled() which is sufficient because shrink_slab makes sure
that only memcg aware shrinkers will get non-NULL memcgs and only if
memcg_kmem_enabled is true.

Fixes: 0a6b76dd23fa ("mm: workingset: make shadow node shrinker memcg aware")
Link: http://lkml.kernel.org/r/20161201132156.21450-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@mimuw.edu.pl>
Tested-by: Marek Marczykowski-Górecki <marmarek@mimuw.edu.pl>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: <stable@vger.kernel.org> [4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Thanks for pulling the previous patch for HDLCD. Unfortunately,
yesterday Robin Murphy discovered another issue while playing with
CMA allocation sizes, which he has submitted a fix for.

* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
drm: hdlcd: Fix cleanup order

Fixes oops if userspace calls DRM_IOCTL_GET_CAP for
DRM_CAP_PAGE_FLIP_TARGET on a non-KMS device node. (Normal userspace
doesn't do that, discovered by syzkaller)

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: f837297ad824 ("drm: Add DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags v2")
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161130083002.1520-1-michel@daenzer.net

On the DMA mapping error path, sg may be NULL (it has already been
marked as the last scatterlist entry), and we should avoid dereferencing
it again.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e227330223a7 ("drm/i915: avoid leaking DMA mappings")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20161114112930.2033-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
(cherry picked from commit b17993b7b29612369270567643bcff814f4b3d7f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Pull networking fixes from David Miller:

1) Lots more phydev and probe error path leaks in various drivers by
Johan Hovold.

2) Fix race in packet_set_ring(), from Philip Pettersson.

3) Use after free in dccp_invalid_packet(), from Eric Dumazet.

4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric
Dumazet.

5) When tunneling between ipv4 and ipv6 we can be left with the wrong
skb->protocol value as we enter the IPSEC engine and this causes all
kinds of problems. Set it before the output path does any
dst_output() calls, from Eli Cooper.

6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from
Florian Fainelli.

7) Various netfilter nat bug fixes from FLorian Westphal.

8) Fix memory leak in ipvlan_link_new(), from Gao Feng.

9) Locking fixes, particularly wrt. socket lookups, in l2tp from
Guillaume Nault.

10) Avoid invoking rhash teardowns in atomic context by moving netlink
cb->done() dump completion from a worker thread. Fix from Herbert
Xu.

11) Buffer refcount problems in tun and macvtap on errors, from Jason
Wang.

12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user
selects BBR. Fix from Julian Wollrath.

13) Fix deadlock in transmit path on altera TSE driver, from Lino
Sanfilippo.

14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita
Yushchenko.

15) tc_tunnel_key needs to be properly exported to userspace via uapi,
fix from Roi Dayan.

16) rds_tcp_init_net() doesn't unregister notifier in error path, fix
from Sowmini Varadhan.

17) Stale packet header pointer access after pskb_expand_head() in
genenve driver, fix from Sabrina Dubroca.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
net: avoid signed overflows for SO_{SND|RCV}BUFFORCE
geneve: avoid use-after-free of skb->data
tipc: check minimum bearer MTU
net: renesas: ravb: unintialized return value
sh_eth: remove unchecked interrupts for RZ/A1
net: bcmgenet: Utilize correct struct device for all DMA operations
NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040
cdc_ether: Fix handling connection notification
ip6_offload: check segs for NULL in ipv6_gso_segment.
RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net
Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"
ipv6: Set skb->protocol properly for local output
ipv4: Set skb->protocol properly for local output
packet: fix race condition in packet_set_ring
net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler
net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers
net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks
net: ethernet: stmmac: platform: fix outdated function header
net: ethernet: stmmac: dwmac-meson8b: fix probe error path
net: ethernet: stmmac: dwmac-generic: fix probe error path
...

The core and the cluster sleep state entry latencies can't be same as
cluster sleep involves more work compared to core level e.g. shared
cache maintenance.

Experiments have shown on an average about 100us more latency for the
cluster sleep state compared to the core level sleep. This patch fixes
the entry latency for the cluster sleep state.

Fixes: 28e10a8f3a03 ("arm64: dts: juno: Add idle-states to device tree")
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "Jon Medhurst (Tixy)" <tixy@linaro.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Regression fixes for PX and a powerplay fix.

* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix check for port PM availability
drm/amdgpu: fix check for port PM availability
drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgr

If hdlcd_drm_bind() fails at drm_fbdev_cma_init(), its cleanup will call
drm_mode_config_cleanup() as if to balance drm_mode_config_reset(). The
net result is that drm_connector_cleanup() will clean up the active
connectors long before component_unbind_all() gets called, so when the
connector later tries to clean up itself after being unbound, Bad Things
can happen:

[ 4.121888] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
[ 4.129951] pgd = ffffff80091e0000
[ 4.133345] [00000000] *pgd=00000009ffffe003, *pud=00000009ffffe003,
*pmd=0000000000000000
[ 4.141613] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 4.147144] Modules linked in:
[ 4.150188] CPU: 0 PID: 122 Comm: kworker/u12:2 Not tainted
4.8.0-rc2+ #989
[ 4.157097] Hardware name: ARM Juno development board (r1) (DT)
[ 4.162981] Workqueue: deferwq deferred_probe_work_func
[ 4.168173] task: ffffffc975d93200 task.stack: ffffffc975dac000
[ 4.174055] PC is at drm_connector_cleanup+0x58/0x1c0
[ 4.179074] LR is at tda998x_unbind+0x24/0x40
[ 4.183401] pc : [<ffffff80084c46f0>] lr : [<ffffff800850414c>]
pstate: 00000045
[ 4.190750] sp : ffffffc975dafa10
[ 4.194041] x29: ffffffc975dafa10 x28: ffffffc9768152a8
[ 4.199325] x27: ffffffc97ff46450 x26: ffffff8008d99000
[ 4.204608] x25: dead000000000100 x24: dead000000000200
[ 4.209891] x23: ffffffc976bf91e8 x22: 0000000000000000
[ 4.215172] x21: ffffffc976bf9170 x20: ffffffc976bf9170
[ 4.220454] x19: ffffffc976bf9018 x18: 0000000000000000
[ 4.225737] x17: 0000000074ce71ee x16: 000000008ff5d35f
[ 4.231019] x15: ffffffc97681e91c x14: ffffffffffffffff
[ 4.236301] x13: ffffffc97681e185 x12: 0000000000000038
[ 4.241583] x11: 0101010101010101 x10: 0000000000000000
[ 4.246866] x9 : 0000000040000000 x8 : 0000000000210d00
[ 4.252148] x7 : ffffffc97fea8c00 x6 : 000000000000001b
[ 4.257430] x5 : ffffff80084b7b8c x4 : 0000000000000080
[ 4.262712] x3 : ffffff8008504128 x2 : ffffffc975df3800
[ 4.267993] x1 : 0000000000000000 x0 : 0000000000000000
...
[ 4.750937] [<ffffff80084c46f0>] drm_connector_cleanup+0x58/0x1c0
[ 4.756990] [<ffffff800850414c>] tda998x_unbind+0x24/0x40
[ 4.762354] [<ffffff8008507918>] component_unbind.isra.4+0x28/0x50
[ 4.768492] [<ffffff8008507a0c>] component_unbind_all+0xcc/0xd8
[ 4.774373] [<ffffff80084d5adc>] hdlcd_drm_bind+0x234/0x418
[ 4.779909] [<ffffff8008507b58>] try_to_bring_up_master+0x140/0x1a0
[ 4.786133] [<ffffff8008507c50>] component_add+0x98/0x170
[ 4.791496] [<ffffff8008504b90>] tda998x_probe+0x18/0x20
[ 4.796774] [<ffffff80086bf914>] i2c_device_probe+0x164/0x258
[ 4.802481] [<ffffff800850d094>] driver_probe_device+0x204/0x2b0
[ 4.808447] [<ffffff800850d28c>] __device_attach_driver+0x9c/0xf8
[ 4.814498] [<ffffff800850b108>] bus_for_each_drv+0x58/0x98
[ 4.820033] [<ffffff800850cd64>] __device_attach+0xc4/0x138
[ 4.825567] [<ffffff800850d338>] device_initial_probe+0x10/0x18
[ 4.831446] [<ffffff800850c124>] bus_probe_device+0x94/0xa0
[ 4.836981] [<ffffff800850c5b0>] deferred_probe_work_func+0x78/0xb0
[ 4.843207] [<ffffff80080d2998>] process_one_work+0x118/0x378
[ 4.848914] [<ffffff80080d2c40>] worker_thread+0x48/0x498
[ 4.854276] [<ffffff80080d8918>] kthread+0xd0/0xe8
[ 4.859036] [<ffffff8008082e90>] ret_from_fork+0x10/0x40
[ 4.864314] Code: f2fbd5b9 f2fbd5b8 f8478ee0 eb17001f (f9400013)
[ 4.870472] ---[ end trace a643cfe4ce1d838b ]---

Fix this by moving the drm_mode_config_cleanup() much later such that it
correctly balances drm_mode_config_init().

Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

Ozgur Karatas reported that the very first entry in the CREDITS file had
the wrong tag for name (M: instead of N: - it happened when moving the
entry from the MAINTAINERS file, where 'M:' stands for "Maintainer").

And when I went looking, I found a couple of other cases of wrong
tagging too.

Reported-by: Ozgur Karatas <mueddib@yandex.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CAP_NET_ADMIN users should not be allowed to set negative
sk_sndbuf or sk_rcvbuf values, as it can lead to various memory
corruptions, crashes, OOM...

Note that before commit 82981930125a ("net: cleanups in
sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF
and SO_RCVBUF were vulnerable.

This needs to be backported to all known linux kernels.

Again, many thanks to syzkaller team for discovering this gem.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PCIe root complex on Juno translates the MMIO mapped
at 0x5f800000 to the PIO address range starting at 0
(which is common because PIO addresses are generally < 64k).
Correct the DT to reflect this.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The ATPX method does not always exist on the dGPU, it may be located at
the iGPU. The parent device of the iGPU is the root port for which
bridge_d3 is false. This accidentally enables the legacy PM method which
conflicts with port PM and prevented the dGPU from powering on.

Ported from amdgpu commit:
drm/amdgpu: fix check for port PM availability
from Peter Wu.

Fixes: d3ac31f3b4bf9fad (drm/radeon: fix power state when port pm is unavailable (v2))
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: <stable@vger.kernel.org> # 4.8+

While testing HDMI with Xorg on the Juno board, I find that when Xorg
starts up or shuts down, the display is shifted significantly to the
right and wrapped in the active region. (No sync bars are visible.)
The timings are correct, it behaves as if the start address has been
shifted many pixels _into_ the framebuffer.

This occurs whenever the display mode size is changed - using xrandr
in Xorg shows that changing the resolution triggers the problem
almost every time, but changing the refresh rate does not.

Using devmem2 to disable and re-enable the HDLCD resolves the issue,
and repeated disable/enable cycles do not make the issue re-appear.
Further debugging shows that we try to update the controller
configuration while enabled.

Alwys ensure that the HDLCD is disabled prior to updating the
controller timings, and use drm_crtc_vblank_off()/drm_crtc_vblank_on()
so that DRM knows whether it can expect vblank interrupts.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

Pull IOMMU fixes from David Woodhouse:
"Two minor fixes.

The first fixes the assignment of SR-IOV virtual functions to the
correct IOMMU unit, and the second fixes the excessively large (and
physically contiguous) PASID tables used with SVM"

* git://git.infradead.org/intel-iommu:
iommu/vt-d: Fix PASID table allocation
iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions

Pull KVM fixes from Radim Krčmář:
"All architectures avoid memory corruption in an error path. ARM
prevents bogus acknowledgement of interrupts"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: use after free in kvm_ioctl_create_device()
KVM: arm/arm64: vgic: Don't notify EOI for non-SPIs

geneve{,6}_build_skb can end up doing a pskb_expand_head(), which
makes the ip_hdr(skb) reference we stashed earlier stale. Since it's
only needed as an argument to ip_tunnel_ecn_encap(), move this
directly in the function call.

Fixes: 08399efc6319 ("geneve: ensure ECN info is handled properly in all tx/rx paths")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull "STi DT fix" from Patrice Chotard:

The I2C nodes are missing #address-cells and #size-cells.
This is causing warning at device tree compilation when
some I2C device sub-nodes are defined.

* tag 'sti-dt-for-v4.9-rc-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH407-family: fix i2c nodes

The ATPX method does not always exist on the dGPU, it may be located at
the iGPU. The parent device of the iGPU is the root port for which
bridge_d3 is false. This accidentally enables the legacy PM method which
conflicts with port PM and prevented the dGPU from powering on.

Fixes: 1db4496f167b ("drm/amdgpu: fix power state when port pm is unavailable")

Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 4.8+

Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.9:

- Fix unreadable output in __do_page_fault due to the KERN_CONT
patchset

- Correctly handle MIPS R6 fixes to the c0_wired register"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: mm: Fix output of __do_page_fault
MIPS: Mask out limit field when calculating wired entry count

Somehow I ended up with an off-by-three error in calculating the size of
the PASID and PASID State tables, which triggers allocations failures as
those tables unfortunately have to be physically contiguous.

In fact, even the *correct* maximum size of 8MiB is problematic and is
wont to lead to allocation failures. Since I have extracted a promise
that this *will* be fixed in hardware, I'm happy to limit it on the
current hardware to a maximum of 0x20000 PASIDs, which gives us 1MiB
tables — still not ideal, but better than before.

Reported by Mika Kuoppala <mika.kuoppala@linux.intel.com> and also by
Xunlei Pang <xlpang@redhat.com> who submitted a simpler patch to fix
only the allocation (and not the free) to the "correct" limit... which
was still problematic.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org

Pull i2c fix from Wolfram Sang:
"Here is the revert for the regression of the i2c-octeon driver I
mentioned last time. I wished for a bit more feedback, but all people
working actively on it are in need of this patch, so here it goes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: octeon: thunderx: Limit register access retries"

We should move the ops->destroy(dev) after the list_del(&dev->vm_node)
so that we don't use "dev" after freeing it.

Fixes: a28ebea2adc4 ("KVM: Protect device ops->create and list_add with kvm->lock")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Qian Zhang (张谦) reported a potential socket buffer overflow in
tipc_msg_build() which is also known as CVE-2016-8632: due to
insufficient checks, a buffer overflow can occur if MTU is too short for
even tipc headers. As anyone can set device MTU in a user/net namespace,
this issue can be abused by a regular user.

As agreed in the discussion on Ben Hutchings' original patch, we should
check the MTU at the moment a bearer is attached rather than for each
processed packet. We also need to repeat the check when bearer MTU is
adjusted to new device MTU. UDP case also needs a check to avoid
overflow when calculating bearer MTU.

Fixes: b97bf3fd8f6a ("[TIPC] Initial merge")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull "Allwinner fixes for 4.9, second iteration" from Maxime Ripard:

A renaming of the GR8 DTSI and DTS to make it explicitly part of the sun5i
family.

* tag 'sunxi-fixes-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: gr8: Rename the DTSI and relevant DTS

The I2C nodes are missing #address-cells and #size-cells. This is
causing warning at device tree compilation when some I2C device
sub-nodes are defined.

Signed-off-by: Loic Pallardy <loic.pallardy@st.com>

This could lead to mclk dpm problems on some boards.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Ack-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull KVM fixes from Paolo Bonzini:
"ARM fixes. There are a couple pending x86 patches but they'll have to
wait for next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs
KVM: arm/arm64: vgic: Prevent access to invalid SPIs
arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU

Pull vfs splice fix from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix default_file_splice_read()

Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output from __do_page_fault on MIPS has been
pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont
to provide the appropriate markers & restore the expected output.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14544/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The VT-d specification (§8.3.3) says:
‘Virtual Functions’ of a ‘Physical Function’ are under the scope
of the same remapping unit as the ‘Physical Function’.

The BIOS is not required to list all the possible VFs in the scope
tables, and arguably *shouldn't* make any attempt to do so, since there
could be a huge number of them.

This has been broken basically for ever — the VF is never going to match
against a specific unit's scope, so it ends up being assigned to the
INCLUDE_ALL IOMMU. Which was always actually correct by coincidence, but
now we're looking at Root-Complex integrated devices with SR-IOV support
it's going to start being wrong.

Fix it to simply use pci_physfn() before doing the lookup for PCI devices.

Cc: stable@vger.kernel.org
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

With binutils-2.26 and before, a weak missing symbol was kept during the
final link, and a missing CRC for an export would lead to that CRC being
treated as zero implicitly. With binutils-2.27, the crc symbol gets
dropped, and any module trying to use it will fail to load.

This sets the weak CRC symbol to zero explicitly, making it defined in
vmlinux, which in turn lets us load the modules referring to that CRC.

The comment above the __CRC_SYMBOL macro suggests that this was always
the intention, although it also seems that all symbols defined in C have
a correct CRC these days, and only the exports that are now done in
assembly need this.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Adam Borowski <kilobyte@angband.pl>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 70121f7f3725 ("i2c: octeon: thunderx: Limit register access retries").
Using readq_poll_timeout instead of __raw_readq triggers the following
debug warning:

[ 78.871568] ipmi_ssif: Trying hotmod-specified SSIF interface at i2c address 0x12, adapter Cavium ThunderX i2c adapter at 0000:01:09.4, slave address 0x0
[ 78.886107] do not call blocking ops when !TASK_RUNNING; state=2 set at [<fffffc00080e0088>] prepare_to_wait_event+0x58/0x10c
[ 78.897436] ------------[ cut here ]------------
[ 78.902050] WARNING: CPU: 6 PID: 2235 at kernel/sched/core.c:7718 __might_sleep+0x80/0x88

[...]

[ 79.133553] [<fffffc00080c3aac>] __might_sleep+0x80/0x88
[ 79.138862] [<fffffc0000e30138>] octeon_i2c_test_iflg+0x4c/0xbc [i2c_thunderx]
[ 79.146077] [<fffffc0000e30958>] octeon_i2c_test_ready+0x18/0x70 [i2c_thunderx]
[ 79.153379] [<fffffc0000e30b04>] octeon_i2c_wait+0x154/0x1a4 [i2c_thunderx]
[ 79.160334] [<fffffc0000e310bc>] octeon_i2c_xfer+0xf4/0xf60 [i2c_thunderx]

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Acked-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

KVM/ARM updates for v4.9-rc7

- Do not call kvm_notify_acked for PPIs

Marc Kleine-Budde says:

====================
pull-request: can 2016-12-02

this is a pull request for net/master.

There are two patches by Stephane Grosjean, who adds support for the new
PCAN-USB X6 USB interface to the pcan_usb driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Reviews have found that sun5i was a better prefix after all for the GR8.
Rename the relevant device trees before it's too late.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Change cs-gpio to cs-gpios.

Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>

This branch include patches of fixing a typo, accurate dsi frame rate,
and fixing null pointer dereference.

* 'mediatek-drm-fixes-2016-11-24' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: fix null pointer dereference
drm/mediatek: fixed the calc method of data rate per lane
drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE

Merge media fixes from Mauro Carvalho Chehab:
"This contains two patches fixing problems with my patch series meant
to make USB drivers to work again after the DMA on stack changes.

The last patch on this series is actually not related to DMA on stack.
It solves a longstanding bug affecting module unload, causing
module_put() to be called twice. It was reported by the user who
reported and tested the issues with the gp8psk driver with the DMA
fixup patches. As we're late at -rc cycle, maybe you prefer to not
apply it right now. If this is the case, I'll add to the pile of
patches for 4.10.

Exceptionally this time, I'm sending the patches via e-mail, because
I'm on another trip, and won't be able to use the usual procedure
until Monday. Also, it is only three patches, and you followed already
the discussions about the first one"

* emailed patches from Mauro Carvalho Chehab <mchehab@osg.samsung.com>:
gp8psk: Fix DVB frontend attach
gp8psk: fix gp8psk_usb_in_op() logic
dvb-usb: move data_mutex to struct dvb_usb_device

KVM/ARM updates for v4.9-rc4

- Kick the vcpu when a pending interrupt becomes pending again
- Prevent access to invalid interrupt registers
- Invalid TLBs when two vcpus from the same VM share a CPU

Pull i2c fixes from Wolfram Sang:
"Here is a revert and two bugfixes for the I2C designware driver.

Please note that we are still hunting down a regression for the
i2c-octeon driver. While there is a fix pending, we have unclear
feedback from the testers currently. An rc8 would be quite helpful
for this case"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: designware: do not disable adapter after transfer"
i2c: designware: fix rx fifo depth tracking
i2c: designware: report short transfers

Botched calculation of number of pages. As the result,
we were dropping pieces when doing splice to pipe from
e.g. 9p.

Reported-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Since MIPSr6 the Wired register is split into 2 fields, with the upper
16 bits of the register indicating a limit on the value that the wired
entry count in the bottom 16 bits of the register can take. This means
that simply reading the wired register doesn't get us a valid TLB entry
index any longer, and we instead need to retrieve only the lower 16 bits
of the register. Introduce a new num_wired_entries() function which does
this on MIPSr6 or higher and simply returns the value of the wired
register on older architecture revisions, and make use of it when
reading the number of wired entries.

Since commit e710d6668309 ("MIPS: tlb-r4k: If there are wired entries,
don't use TLBINVF") we have been using a non-zero number of wired
entries to determine whether we should avoid use of the tlbinvf
instruction (which would invalidate wired entries) and instead loop over
TLB entries in local_flush_tlb_all(). This loop begins with the number
of wired entries, or before this patch some large bogus TLB index on
MIPSr6 systems. Thus since the aforementioned commit some MIPSr6 systems
with FTLBs have been prone to leaving stale address translations in the
FTLB & crashing in various weird & wonderful ways when we later observe
the wrong memory.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14557/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull PCI fixes from Bjorn Helgaas:
"PCI fixes:

- Fix Read Completion Boundary setting, which fixes a boot failure on
IBM x3850 with Mellanox MT27500 ConnectX-3

- Update some MAINTAINERS entries and email addresses"

* tag 'pci-v4.9-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Set Read Completion Boundary to 128 iff Root Port supports it (_HPX)
PCI: Export pcie_find_root_port
PCI: designware-plat: Update author email
PCI: designware: Change maintainer to Joao Pinto
MAINTAINERS: Add devicetree binding to PCI i.MX6 entry
MAINTAINERS: Update Richard Zhu's email address

When we inject a level triggerered interrupt (and unless it
is backed by the physical distributor - timer style), we request
a maintenance interrupt. Part of the processing for that interrupt
is to feed to the rest of KVM (and to the eventfd subsystem) the
information that the interrupt has been EOIed.

But that notification only makes sense for SPIs, and not PPIs
(such as the PMU interrupt). Skip over the notification if
the interrupt is not an SPI.

Cc: stable@vger.kernel.org # 4.7+
Fixes: 140b086dd197 ("KVM: arm/arm64: vgic-new: Add GICv2 world switch backend")
Fixes: 59529f69f504 ("KVM: arm/arm64: vgic-new: Add GICv3 world switch backend")
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

We want to set the other "err" variable here so that we can return it
later. My version of GCC misses this issue but I caught it with a
static checker.

Fixes: 9f70eb339f52 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for PEAK-System PCAN-USB X6 USB to CAN interface.

The CAN FD adapter PCAN-USB X6 allows the connection of up to 6 CAN FD
or CAN networks to a computer via USB. The interface is installed in an
aluminum profile casing and is shipped in versions with D-Sub connectors
or M12 circular connectors.

The PCAN-USB X6 registers in the USB sub-system as if 3x PCAN-USB-Pro FD
adapters were plugged. So, this patch:

- updates the PEAK_USB entry of the corresponding Kconfig file
- defines and adds the device id. of the PCAN-USB X6 (0x0014) into the
table of supported device ids
- defines and adds the new software structure implementing the PCAN-USB X6,
which is obviously a clone of the software structure implementing the
PCAN-USB Pro FD.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>