tjh.dev
commits
Pull x86 fixes from Ingo Molnar:
"Two fixes:
- A PCID related revert that fixes power management and performance
regressions.
- The module loader robustization and sanity check commit is rather
fresh, but it looked like a good idea to apply because of the
hidden data corruption problem such invalid modules could cause"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/module: Detect and skip invalid relocations
Revert "x86/mm: Stop calling leave_mm() in idle code"
Pull RAS fix from Ingo Molnar:
"Fix an RCU warning that triggers when /dev/mcelog is used"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mcelog: Get rid of RCU remnants
There have been some cases where external tooling (e.g., kpatch-build)
creates a corrupt relocation which targets the wrong address. This is a
silent failure which can corrupt memory in unexpected places.
On x86, the bytes of data being overwritten by relocations are always
initialized to zero beforehand. Use that knowledge to add sanity checks
to detect such cases before they corrupt memory.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jeyu@kernel.org
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com
[ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf fixes from Ingo Molnar:
"Various fixes:
- synchronize kernel and tooling headers
- cgroup support fix
- two tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/headers: Synchronize kernel ABI headers
perf/cgroup: Fix perf cgroup hierarchy support
perf tools: Unwind properly location after REJECT
perf symbols: Fix memory corruption because of zero length symbols
Jeremy reported a suspicious RCU usage warning in mcelog.
/dev/mcelog is called in process context now as part of the notifier
chain and doesn't need any of the fancy RCU and lockless accesses which
it did in atomic context.
Axe it all in favor of a simple mutex synchronization which cures the
problem reported.
Fixes: 5de97c9f6d85 ("x86/mce: Factor out and deprecate the /dev/mcelog driver")
Reported-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-and-tested-by: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: linux-edac@vger.kernel.org
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171101164754.xzzmskl4ngrqc5br@pd.tnic
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1498969
This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5.
The reason I removed the leave_mm() calls in question is because the
heuristic wasn't needed after that patch. With the original version
of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running
kernel thread) due a flush on the loaded mm.
Unfortunately, that caused architectural issues, so now I've
reinstated these flushes on non-PCID systems in:
commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode").
That, in turn, gives us a power management and occasionally
performance regression as compared to old kernels: a process that
goes into a deep idle state on a given CPU and gets its mm flushed
due to activity on a different CPU will wake the idle CPU.
Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an
intel_idle state that is likely to cause a TLB flush gets its mm
switched to init_mm before going idle.
FWIW, this heuristic is lousy. Whether we should change CR3 before
idle isn't a good hint except insofar as the performance hit is a bit
lower if the TLB is getting flushed by the idle code anyway. What we
really want to know is whether we anticipate being idle long enough
that the mm is likely to be flushed before we wake up. This is more a
matter of the expected latency than the idle state that gets chosen.
This heuristic also completely fails on systems that don't know
whether the TLB will be flushed (e.g. AMD systems?). OTOH it may be a
bit obsolete anyway -- PCID systems don't presently benefit from this
heuristic at all.
We also shouldn't do this callback from innermost bit of the idle code
due to the RCU nastiness it causes. All the information need is
available before rcu_idle_enter() needs to happen.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code"
Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull irq fix from Ingo Molnar:
"An irqchip driver init fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-mvebu-gicp: Add missing spin_lock init
After the SPDX license tags were added a number of tooling headers got out of
sync with their kernel variants, generating lots of build warnings.
Sync them:
- tools/arch/x86/include/asm/disabled-features.h,
tools/arch/x86/include/asm/required-features.h,
tools/include/linux/hash.h:
Remove the SPDX tag where the kernel version does not have it.
- tools/include/asm-generic/bitops/__fls.h,
tools/include/asm-generic/bitops/arch_hweight.h,
tools/include/asm-generic/bitops/const_hweight.h,
tools/include/asm-generic/bitops/fls.h,
tools/include/asm-generic/bitops/fls64.h,
tools/include/uapi/asm-generic/ioctls.h,
tools/include/uapi/asm-generic/mman-common.h,
tools/include/uapi/sound/asound.h,
tools/include/uapi/linux/kvm.h,
tools/include/uapi/linux/perf_event.h,
tools/include/uapi/linux/sched.h,
tools/include/uapi/linux/vhost.h,
tools/include/uapi/sound/asound.h:
Add the SPDX tag of the respective kernel header.
- tools/include/uapi/linux/bpf_common.h,
tools/include/uapi/linux/fcntl.h,
tools/include/uapi/linux/hw_breakpoint.h,
tools/include/uapi/linux/mman.h,
tools/include/uapi/linux/stat.h,
Change the tag to the kernel header version:
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
Also sync other header details:
- include/uapi/sound/asound.h:
Fix pointless end of line whitespace noise the header grew in this cycle.
- tools/arch/x86/lib/memcpy_64.S:
Sync the code and add tools/include/asm/export.h with dummy wrappers
to support building the kernel side code in a tooling header environment.
- tools/include/uapi/asm-generic/mman.h,
tools/include/uapi/linux/bpf.h:
Sync other details that don't impact tooling's use of the ABIs.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
IB device index is nldev's handler and it should be checked always.
Fixes: c3f66f7b0052 ("RDMA/netlink: Implement nldev port doit callback")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
[ Applying directly, since Doug fried his SSD's and is rebuilding - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull power management fix from Rafael Wysocki:
"This fixes new breakage introduced by the most recent PM QoS fix in
which, embarrassingly enough, I forgot to update
dev_pm_qos_raw_read_value() to return the right default for devices
with no PM QoS constraints at all which prevents runtime PM from
suspending those devices (fix from Tero Kristo)"
* tag 'pm-urgent-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / QoS: Fix default runtime_pm device resume latency
Pull core fixes from Ingo Molnar:
- workaround for gcc asm handling
- futex race fixes
- objtool build warning fix
- two watchdog fixes: a crash fix (revert) and a bug fix for
/proc/sys/kernel/watchdog_thresh handling.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Prevent GCC from merging annotate_unreachable(), take 2
objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
watchdog/hardlockup/perf: Use atomics to track in-use cpu counter
watchdog/harclockup/perf: Revert a33d44843d45 ("watchdog/hardlockup/perf: Simplify deferred event destroy")
futex: Fix more put_pi_state() vs. exit_pi_state_list() races
A spin lock is used in the irq-mvebu-gicp driver, but it is never
initialized. This patch adds the missing spin_lock_init() call in the
driver's probe function.
Fixes: a68a63cb4dfc ("irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: gregory.clement@free-electrons.com
Acked-by: marc.zyngier@arm.com
Cc: thomas.petazzoni@free-electrons.com
Cc: andrew@lunn.ch
Cc: jason@lakedaemon.net
Cc: nadavh@marvell.com
Cc: miquel.raynal@free-electrons.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: sebastian.hesselbarth@gmail.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171025072326.21030-1-antoine.tenart@free-electrons.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It turns out that some drivers seem to think it's ok to remap page
ranges from within interrupts and even NMI's. That is definitely not
the case, since the page table build-up is simply not interrupt-safe.
This showed up in the zero-day robot that reported it for the ACPI APEI
GHES ("Generic Hardware Error Source") driver. Normally it had been
hidden by the fact that no page table operations had been needed because
the vmalloc area had been set up by other things.
Apparently due to a recent change to the GHEI driver: commit
77b246b32b2c ("acpi: apei: check for pending errors when probing GHES
entries") 0day actually caught a case during bootup whenthe ioremap
called down to page allocation. But that recent change only showed the
symptom, it wasn't the root cause of the problem.
Hopefully it is limited to just that one driver.
If you need to access random physical memory, you either need to ioremap
in process context, or you need to use the FIXMAP facility to set one
particular fixmap entry to the required mapping - that can be done safely.
Cc: Borislav Petkov <bp@suse.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tyler Baicar <tbaicar@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent change to the PM QoS framework to introduce a proper
no constraint value overlooked to handle the devices which don't
implement PM QoS OPS. Runtime PM is one of the more severely
impacted subsystems, failing every attempt to runtime suspend
a device. This leads into some nasty second level issues like
probe failures and increased power consumption among other
things.
Fix this by adding a proper return value for devices that don't
implement PM QoS.
Fixes: 0cc2b4e5a020 (PM / QoS: Fix device resume latency PM QoS)
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull enforcement statement update from Greg KH:
"Documentation: enforcement-statement: name updates
Here are 12 patches for the kernel-enforcement-statement.rst file that
add new names, fix the ordering of them, remove a duplicate, and
remove some company markings that wished to be removed.
All of these have passed the 0-day testing, even-though it is just a
documentation file update :)"
* tag 'enforcement-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Add Frank Rowand to list of enforcement statement endorsers
doc: add Willy Tarreau to the list of enforcement statement endorsers
Documentation: Add Tim Bird to list of enforcement statement endorsers
Documentation: Add my name to kernel enforcement statement
Documentation: kernel-enforcement-statement.rst: proper sort names
Documentation: Add Arm Ltd to kernel-enforcement-statement.rst
Documentation: kernel-enforcement-statement.rst: Remove Red Hat markings
Documentation: Add myself to the enforcement statement list
Documentation: Sign kernel enforcement statement
Add ack for Trond Myklebust to the enforcement statement
Documentation: update kernel enforcement support list
Documentation: add my name to supporters
This fixes the following warning with GCC 4.6:
mm/migrate.o: warning: objtool: migrate_misplaced_transhuge_page()+0x71: unreachable instruction
The problem is that the compiler merged identical annotate_unreachable()
inline asm blocks, resulting in a missing 'unreachable' annotation.
This problem happened before, and was partially fixed with:
3d1e236022cc ("objtool: Prevent GCC from merging annotate_unreachable()")
That commit tried to ensure that each instance of the
annotate_unreachable() inline asm statement has a unique label. It used
the __LINE__ macro to generate the label number. However, even the line
number isn't necessarily unique when used in an inline function with
multiple callers (in this case, __alloc_pages_node()'s use of
VM_BUG_ON).
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Fixes: 3d1e236022cc ("objtool: Prevent GCC from merging annotate_unreachable()")
Link: http://lkml.kernel.org/r/20171103221941.cajpwszir7ujxyc4@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
864c2357ca89 ("perf/core: Do not set cpuctx->cgrp for unscheduled cgroups")
made list_update_cgroup_event() skip setting cpuctx->cgrp if no cgroup event
targets %current's cgroup.
This breaks perf_event's hierarchical support because events which target one
of the ancestors get ignored.
Fix it by using cgroup_is_descendant() test instead of equality.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org # v4.9+
Fixes: 864c2357ca89 ("perf/core: Do not set cpuctx->cgrp for unscheduled cgroups")
Link: http://lkml.kernel.org/r/20171028164237.GA972780@devbig577.frc2.facebook.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For some odd historical reason, we preprocessed the linker scripts with
"-C", which keeps comments around. That makes no sense, since the
comments are not meaningful for the build anyway.
And it actually breaks things, since linker scripts can't have C++ style
"//" comments in them, so keeping comments after preprocessing now
limits us in odd and surprising ways in our header files for no good
reason.
The -C option goes back to pre-git and pre-bitkeeper times, but seems to
have been historically used (along with "-traditional") for some
odd-ball architectures (ia64, MIPS and SH). It probably didn't matter
back then either, but might possibly have been used to minimize the
difference between the original file and the pre-processed result.
The reason for this may be lost in time, but let's not perpetuate it
only because we can't remember why we did this crazy thing.
This was triggered by the recent addition of SPDX lines to the source
tree, where people apparently were confused about why header files
couldn't use the C++ comment format.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull MMC fixes from Ulf Hansson:
"A couple of MMC host fixes intended for v4.14-rc8:
- renesas_sdhi: fix kernel panic
- tmio: fix swiotlb buffer is full"
* tag 'mmc-v4.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: renesas_sdhi: fix kernel panic in _internal_dmac.c
mmc: tmio: fix swiotlb buffer is full
Pull ARM fixes from Russell King:
- omit EFI memory map sorting, which was recently introduced, but
caused problems with the decompressor due to additional sections
being emitted.
- avoid unaligned load fault-generating instructions in the
decompressor by switching to a private unaligned implementation.
- add a symbol into the decompressor to further debug non-boot
situations (ld's documentation is extremely poor for how "." works,
ld doesn't seem to follow its own documentation!)
- parse endian information to sparse
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: add debug ".edata_real" symbol
ARM: 8716/1: pass endianness info to sparse
efi/libstub: arm: omit sorting of the UEFI memory map
ARM: 8715/1: add a private asm/unaligned.h
Add my name to the list.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the following warning:
warning: objtool: x86 instruction decoder differs from kernel
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/013315a808ccf5580abc293808827c8e2b5e1354.1509719152.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix memory corruption in the annotation routines because of zero
length symbols (asm ones) (Ravi Bangoria)
- Fix printing garbage as an error message when re-running the
lexer events matcher (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 51204e0639c49ada02fd823782ad673b6326d748.
There wasn't really any good reason for it, and people are complaining
(rightly) that it broke existing practice.
Cc: Len Brown <len.brown@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto fix from Herbert Xu:
"This fixes an objtool regression"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/chacha20 - satisfy stack validation 2.0
Since this driver checks if the return value of dma_map_sg() is minus
or not and keeps to enable the DMAC, it may cause kernel panic when
the dma_map_sg() returns 0. So, this patch fixes the issue.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull networking fixes from David Miller:
1) Fix route leak in xfrm_bundle_create().
2) In mac80211, validate user rate mask before configuring it. From
Johannes Berg.
3) Properly enforce memory limits in fair queueing code, from Toke
Hoiland-Jorgensen.
4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet.
5) Fix TSO header allocation and management in mvpp2 driver, from Yan
Markman.
6) Don't take socket lock in BH handler in strparser code, from Tom
Herbert.
7) Don't show sockets from other namespaces in AF_UNIX code, from
Andrei Vagin.
8) Fix double free in error path of tap_open(), from Girish Moodalbail.
9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker
and Alexander Duyck.
10) Fix DCB mode programming in stmmac driver, from Jose Abreu.
11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin
Long.
12) Properly align SKB head before building SKB in tuntap, from Jason
Wang.
13) Avoid matching qdiscs with a zero handle during lookups, from Cong
Wang.
14) Fix various endianness bugs in sctp, from Xin Long.
15) Fix tc filter callback races and add selftests which trigger the
problem, from Cong Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
selftests: Introduce a new test case to tc testsuite
selftests: Introduce a new script to generate tc batch file
net_sched: fix call_rcu() race on act_sample module removal
net_sched: add rtnl assertion to tcf_exts_destroy()
net_sched: use tcf_queue_work() in tcindex filter
net_sched: use tcf_queue_work() in rsvp filter
net_sched: use tcf_queue_work() in route filter
net_sched: use tcf_queue_work() in u32 filter
net_sched: use tcf_queue_work() in matchall filter
net_sched: use tcf_queue_work() in fw filter
net_sched: use tcf_queue_work() in flower filter
net_sched: use tcf_queue_work() in flow filter
net_sched: use tcf_queue_work() in cgroup filter
net_sched: use tcf_queue_work() in bpf filter
net_sched: use tcf_queue_work() in basic filter
net_sched: introduce a workqueue for RCU callbacks of tc filter
sctp: fix some type cast warnings introduced since very beginning
sctp: fix a type cast warnings that causes a_rwnd gets the wrong value
sctp: fix some type cast warnings introduced by transport rhashtable
sctp: fix some type cast warnings introduced by stream reconf
...
Pull KVM fixes from Paolo Bonzini:
"Fixes for interrupt controller emulation in ARM/ARM64 and x86, plus a
one-liner x86 KVM guest fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Update APICv on APIC reset
KVM: VMX: Do not fully reset PI descriptor on vCPU reset
kvm: Return -ENODEV from update_persistent_clock
KVM: arm/arm64: vgic-its: Check GITS_BASER Valid bit before saving tables
KVM: arm/arm64: vgic-its: Check CBASER/BASER validity before enabling the ITS
KVM: arm/arm64: vgic-its: Fix vgic_its_restore_collection_table returned value
KVM: arm/arm64: vgic-its: Fix return value for device table restore
arm/arm64: kvm: Disable branch profiling in HYP code
arm/arm64: kvm: Move initialization completion message
arm/arm64: KVM: set right LR register value for 32 bit guest when inject abort
KVM: arm64: its: Fix missing dynamic allocation check in scan_its_table
Add an additional symbol to the decompressor image, which will allow
future debugging of non-bootable problems similar to the one encountered
with the EFI stub.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
add me to the list.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want to fix an objtool build warning that got introduced in the latest upstream kernel.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull xen fixes from Juergen Gross:
- a fix for the Xen gntdev device repairing an issue in case of partial
failure of mapping multiple pages of another domain
- a fix of a regression in the Xen balloon driver introduced in 4.13
- a build fix for Xen on ARM which will trigger e.g. for Linux RT
- a maintainers update for pvops (not really Xen, but carrying through
this tree just for convenience)
* tag 'for-linus-4.14c-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
maintainers: drop Chris Wright from pvops
arm/xen: don't inclide rwlock.h directly.
xen: fix booting ballooned down hvm guest
xen/gntdev: avoid out of bounds access in case of partial gntdev_mmap()
We have defined YY_USER_ACTION to keep trace of the column location
during events parsing, but we need to clean it up when we call REJECT.
When REJECT is called, the lexer shrinks the text and re-runs the
matching, so we need to address it in resuming the previous location
value to keep it correct for error display, like:
Before:
$ perf stat -e 'cpu/uops_executed.core,krava/' true
event syntax error: '..38;5;9:mi=01;05;37;41:su=48;5;196;38;5;15:sg=48;5;1\
1;38;5;16:ca=48;5;196;38;5;226:tw=48;5;10;38;5;16:ow=48;5;10;38;5;21:st=48;5;\
21;38;50
�'
\___ unknown term
After:
$ ./perf stat -e 'cpu/uops_executed.core,krava/' true
event syntax error: '..cuted.core,krava/'
\___ unknown term
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vug2hchlny30jfsfrumbym26@git.kernel.org
Link: http://lkml.kernel.org/r/20171009140944.GD28623@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull arm64 fix from Catalin Marinas:
"Check addr_limit in arm64 __dump_instr()"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ensure __dump_instr() checks addr_limit
The new stack validator in objdump doesn't like directly assigning r11
to rsp, warning with something like:
warning: objtool: chacha20_4block_xor_ssse3()+0xa: unsupported stack pointer realignment
warning: objtool: chacha20_8block_xor_avx2()+0x6: unsupported stack pointer realignment
This fixes things up to use code similar to gcc's DRAP register, so that
objdump remains happy.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the commit de3ee99b097d ("mmc: Delete bounce buffer handling")
deletes the bounce buffer handling, a request data size will be referred
to max_{req,seg}_size instead of MMC_QUEUE_BOUNCESZ (64k bytes).
In other hand, renesas_sdhi_internal_dmac.c will set very big value of
max_{req,seg}_size because the max_blk_count is set to 0xffffffff.
And then, "swiotlb buffer is full" happens because swiotlb can handle
a memory size up to 256k bytes only (IO_TLB_SEGSIZE = 128 and
IO_TLB_SHIFT = 11).
So, as a workaround, this patch avoids the issue by setting
the max_{req,seg}_size up to 256k bytes if swiotlb is running.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull Kbuild fixes from Masahiro Yamada:
- fix O= building on dash
- remove unused dependency in Makefile
- fix default of a choice in Kconfig
- fix typos and documentation style
- fix command options unrecognized by sparse
* tag 'kbuild-fixes-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: clang: fix build failures with sparse check
kbuild doc: a bundle of fixes on makefiles.txt
Makefile: kselftest: fix grammar typo
kbuild: Fix optimization level choice default
kbuild: drop unused symverfile in Makefile.modpost
kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)
Cong Wang says:
====================
net_sched: fix races with RCU callbacks
Recently, the RCU callbacks used in TC filters and TC actions keep
drawing my attention, they introduce at least 4 race condition bugs:
1. A simple one fixed by Daniel:
commit c78e1746d3ad7d548bdf3fe491898cc453911a49
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Wed May 20 17:13:33 2015 +0200
net: sched: fix call_rcu() race on classifier module unloads
2. A very nasty one fixed by me:
commit 1697c4bb5245649a23f06a144cc38c06715e1b65
Author: Cong Wang <xiyou.wangcong@gmail.com>
Date: Mon Sep 11 16:33:32 2017 -0700
net_sched: carefully handle tcf_block_put()
3. Two more bugs found by Chris:
https://patchwork.ozlabs.org/patch/826696/
https://patchwork.ozlabs.org/patch/826695/
Usually RCU callbacks are simple, however for TC filters and actions,
they are complex because at least TC actions could be destroyed
together with the TC filter in one callback. And RCU callbacks are
invoked in BH context, without locking they are parallel too. All of
these contribute to the cause of these nasty bugs.
Alternatively, we could also:
a) Introduce a spinlock to serialize these RCU callbacks. But as I
said in commit 1697c4bb5245 ("net_sched: carefully handle
tcf_block_put()"), it is very hard to do because of tcf_chain_dump().
Potentially we need to do a lot of work to make it possible (if not
impossible).
b) Just get rid of these RCU callbacks, because they are not
necessary at all, callers of these call_rcu() are all on slow paths
and holding RTNL lock, so blocking is allowed in their contexts.
However, David and Eric dislike adding synchronize_rcu() here.
As suggested by Paul, we could defer the work to a workqueue and
gain the permission of holding RTNL again without any performance
impact, however, in tcf_block_put() we could have a deadlock when
flushing workqueue while hodling RTNL lock, the trick here is to
defer the work itself in workqueue and make it queued after all
other works so that we keep the same ordering to avoid any
use-after-free. Please see the first patch for details.
Patch 1 introduces the infrastructure, patch 2~12 move each
tc filter to the new tc filter workqueue, patch 13 adds
an assertion to catch potential bugs like this, patch 14
closes another rcu callback race, patch 15 and patch 16 add
new test cases.
====================
Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ARM SoC fixes from Arnd Bergmann:
"Only two patches came in over the last two weeks: Uniphier USB support
needs additional clocks enabled (on both 32-bit and 64-bit ARM), and a
Marvell MVEBU stability issue has been fixed"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: mvebu: pl310-cache disable double-linefill
arm64: dts: uniphier: add STDMAC clock to EHCI nodes
ARM: dts: uniphier: add STDMAC clock to EHCI nodes
KVM/ARM Fixes for v4.14
- Fixes a number of issues with saving/restoring the ITS
- Fixes a bug in KVM/ARM when branch profiling is enabled in Hyp mode
- Fixes an emulation bug for 32-bit guests when injecting aborts
- Fixes a failure to check if a kmalloc succeeds in the ITS emulation
ARM depends on the macros '__ARMEL__' & '__ARMEB__' being defined
or not to correctly select or define endian-specific macros,
structures or pieces of code.
These macros are predefined by the compiler but sparse knows
nothing about them and thus may pre-process files differently
from what gcc would.
Fix this by passing '-D__ARMEL__' or '-D__ARMEB__' to sparse,
depending on the endianness of the kernel, like defined by GCC.
Note: In most case it won't change anything since most ARMs use
little-endian (but an allyesconfig would use big-endian!).
To: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add my name to the list.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter reported:
There is still a problem. When running
echo 6 > /proc/sys/kernel/watchdog_thresh
echo 5 > /proc/sys/kernel/watchdog_thresh
repeatedly, the message
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
stops after a while (after ~10-30 iterations, with fluctuations).
Maybe watchdog_cpus needs to be atomic ?
That's correct as this again is affected by the asynchronous nature of the
smpboot thread unpark mechanism.
CPU 0 CPU1 CPU2
write(watchdog_thresh, 6)
stop()
park()
update()
start()
unpark()
thread->unpark()
cnt++;
write(watchdog_thresh, 5) thread->unpark()
stop()
park() thread->park()
cnt--; cnt++;
update()
start()
unpark()
That's not a functional problem, it just affects the informational message.
Convert watchdog_cpus to atomic_t to prevent the problem
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20171101181126.j727fqjmdthjz4xk@redhat.com
Pull ARC fixes from Vineet Gupta:
- Fixes for HSDK platform
- module build error for !LLSC config
* tag 'arc-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: unbork module link errors with !CONFIG_ARC_HAS_LLSC
ARC: [plat-hsdk] Increase SDIO CIU frequency to 50000000Hz
ARC: [plat-hsdk] select CONFIG_RESET_HSDK from Kconfig
Mails to chrisw@sous-sol.org are not deliverable since several months.
Drop him as PARAVIRT_OPS maintainer.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Perf top is often crashing at very random locations on powerpc. After
investigating, I found the crash only happens when sample is of zero
length symbol. Powerpc kernel has many such symbols which does not
contain length details in vmlinux binary and thus start and end
addresses of such symbols are same.
Structure
struct sym_hist {
u64 nr_samples;
u64 period;
struct sym_hist_entry addr[0];
};
has last member 'addr[]' of size zero. 'addr[]' is an array of addresses
that belongs to one symbol (function). If function consist of 100
instructions, 'addr' points to an array of 100 'struct sym_hist_entry'
elements. For zero length symbol, it points to the *empty* array, i.e.
no members in the array and thus offset 0 is also invalid for such
array.
static int __symbol__inc_addr_samples(...)
{
...
offset = addr - sym->start;
h = annotation__histogram(notes, evidx);
h->nr_samples++;
h->addr[offset].nr_samples++;
h->period += sample->period;
h->addr[offset].period += sample->period;
...
}
Here, when 'addr' is same as 'sym->start', 'offset' becomes 0, which is
valid for normal symbols but *invalid* for zero length symbols and thus
updating h->addr[offset] causes memory corruption.
Fix this by adding one dummy element for zero length symbols.
Link: https://lkml.org/lkml/2016/10/10/148
Fixes: edee44be5919 ("perf annotate: Don't throw error for zero length symbols")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1508854806-10542-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
It's possible for a user to deliberately trigger __dump_instr with a
chosen kernel address.
Let's avoid problems resulting from this by using get_user() rather than
__get_user(), ensuring that we don't erroneously access kernel memory.
Where we use __dump_instr() on kernel text, we already switch to
KERNEL_DS, so this shouldn't adversely affect those cases.
Fixes: 60ffc30d5652810d ("arm64: Exception handling")
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The shash ahash digest adaptor function may crash if given a
zero-length input together with a null SG list. This is because
it tries to read the SG list before looking at the length.
This patch fixes it by checking the length first.
Cc: <stable@vger.kernel.org>
Reported-by: Stephan Müller<smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Stephan Müller <smueller@chronox.de>
The default for d3_retune is true, but that was not being set in all cases,
which results in eMMC errors because re-tuning has not been done.
Fix by initializing d3_retune to true.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: c959a6b00ff5 ("mmc: sdhci-pci: Don't re-tune with runtime pm for some Intel devices")
Cc: stable@vger.kernel.org # v4.12+
Reported-and-tested-by: ojab <ojab@ojab.ru>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull input fixes from Dmitry Torokhov:
- fix gtco tablet driver, tightening parsing of HID descriptors
- add ACPI ID added to Elan driver to be able to handle touchpads found
in Lenovo Ideapad 320/520
- fix the Symaptics RMI4 driver to adjust handling of buttons
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - limit the range of what GPIOs are buttons
Input: gtco - fix potential out-of-bound access
Input: elan_i2c - add ELAN0611 to the ACPI table
We should avoid using the space character when passing arguments to
clang, because static code analysis check tool such as sparse may
misinterpret the arguments followed by spaces as build targets hence
cause the build to fail.
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Xin Long says:
====================
sctp: a bunch of fixes for some sparse warnings
As Eric noticed, when running 'make C=2 M=net/sctp/', a plenty of
warnings or errors checked by sparse appear. They are all problems
about Endian and type cast.
Most of them are just warnings by which no issues could be caused
while some might be bugs.
This patchset fixes them with four patches basically according to
how they are introduced.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In this patchset, we fixed a tc bug. This patch adds the test case
that reproduces the bug. To run this test case, user should specify
an existing NIC device:
# sudo ./tdc.py -d enp4s0f0
This test case belongs to category "flower". If user doesn't specify
a NIC device, the test cases belong to "flower" will not be run.
In this test case, we create 1M filters and all filters share the same
action. When destroying all filters, kernel should not panic. It takes
about 18s to run it.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull MIPS fixes from James Hogan:
"A selection of important MIPS fixes for 4.14, and some MAINTAINERS /
email address updates:
Maintainership updates:
- imgtec.com -> mips.com email addresses (this trivially updates
comments in quite a few files, as well as MAINTAINERS)
- Pistachio SoC maintainership update
Fixes:
- NI 169445 build (new platform in 4.14)
- EVA regression (4.14)
- SMP-CPS build & preemption regressions (4.14)
- SMP/hotplug deadlock & race (deadlock reintroduced 4.13)
- ebpf_jit error return (4.13)
- SMP-CMP build regressions (4.11 and 4.14)
- bad UASM microMIPS encoding (3.16)
- CM definitions (3.15)"
[ I had taken the email address updates separately, because I didn't
expect James to send a pull request, so those got applied twice. - Linus]
* tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: Update email address for Marcin Nowakowski
MIPS: smp-cmp: Fix vpe_id build error
MAINTAINERS: Update Pistachio platform maintainers
MIPS: smp-cmp: Use right include for task_struct
MIPS: Update Goldfish RTC driver maintainer email address
MIPS: Update RINT emulation maintainer email address
MIPS: CPS: Fix use of current_cpu_data in preemptible code
MIPS: SMP: Fix deadlock & online race
MIPS: bpf: Fix a typo in build_one_insn()
MIPS: microMIPS: Fix incorrect mask in insn_table_MM
MIPS: Fix CM region target definitions
MIPS: generic: Fix compilation error from include asm/mips-cpc.h
MIPS: Fix exception entry when CONFIG_EVA enabled
MIPS: generic: Fix NI 169445 its build
Update MIPS email addresses
Pull "mvebu fixes for 4.14 (part 3)" from Gregory CLEMENT:
Fixing an old stability issue on Cortex A9 based mvebu SoC
* tag 'mvebu-fixes-4.14-3' of git://git.infradead.org/linux-mvebu:
ARM: dts: mvebu: pl310-cache disable double-linefill
In kvm_apic_set_state() we update the hardware virtualized APIC after
the full APIC state has been overwritten. Do the same, when the full
APIC state has been reset in kvm_lapic_reset().
This updates some hardware state that was previously forgotten, as
far as I can tell. Also, this allows removing some APIC-related reset
code from vmx_vcpu_reset().
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull x86 fixes from Ingo Molnar:
"Two fixes:
- A PCID related revert that fixes power management and performance
regressions.
- The module loader robustization and sanity check commit is rather
fresh, but it looked like a good idea to apply because of the
hidden data corruption problem such invalid modules could cause"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/module: Detect and skip invalid relocations
Revert "x86/mm: Stop calling leave_mm() in idle code"
There have been some cases where external tooling (e.g., kpatch-build)
creates a corrupt relocation which targets the wrong address. This is a
silent failure which can corrupt memory in unexpected places.
On x86, the bytes of data being overwritten by relocations are always
initialized to zero beforehand. Use that knowledge to add sanity checks
to detect such cases before they corrupt memory.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jeyu@kernel.org
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com
[ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf fixes from Ingo Molnar:
"Various fixes:
- synchronize kernel and tooling headers
- cgroup support fix
- two tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/headers: Synchronize kernel ABI headers
perf/cgroup: Fix perf cgroup hierarchy support
perf tools: Unwind properly location after REJECT
perf symbols: Fix memory corruption because of zero length symbols
Jeremy reported a suspicious RCU usage warning in mcelog.
/dev/mcelog is called in process context now as part of the notifier
chain and doesn't need any of the fancy RCU and lockless accesses which
it did in atomic context.
Axe it all in favor of a simple mutex synchronization which cures the
problem reported.
Fixes: 5de97c9f6d85 ("x86/mce: Factor out and deprecate the /dev/mcelog driver")
Reported-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-and-tested-by: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: linux-edac@vger.kernel.org
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171101164754.xzzmskl4ngrqc5br@pd.tnic
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1498969
This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5.
The reason I removed the leave_mm() calls in question is because the
heuristic wasn't needed after that patch. With the original version
of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running
kernel thread) due a flush on the loaded mm.
Unfortunately, that caused architectural issues, so now I've
reinstated these flushes on non-PCID systems in:
commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode").
That, in turn, gives us a power management and occasionally
performance regression as compared to old kernels: a process that
goes into a deep idle state on a given CPU and gets its mm flushed
due to activity on a different CPU will wake the idle CPU.
Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an
intel_idle state that is likely to cause a TLB flush gets its mm
switched to init_mm before going idle.
FWIW, this heuristic is lousy. Whether we should change CR3 before
idle isn't a good hint except insofar as the performance hit is a bit
lower if the TLB is getting flushed by the idle code anyway. What we
really want to know is whether we anticipate being idle long enough
that the mm is likely to be flushed before we wake up. This is more a
matter of the expected latency than the idle state that gets chosen.
This heuristic also completely fails on systems that don't know
whether the TLB will be flushed (e.g. AMD systems?). OTOH it may be a
bit obsolete anyway -- PCID systems don't presently benefit from this
heuristic at all.
We also shouldn't do this callback from innermost bit of the idle code
due to the RCU nastiness it causes. All the information need is
available before rcu_idle_enter() needs to happen.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code"
Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After the SPDX license tags were added a number of tooling headers got out of
sync with their kernel variants, generating lots of build warnings.
Sync them:
- tools/arch/x86/include/asm/disabled-features.h,
tools/arch/x86/include/asm/required-features.h,
tools/include/linux/hash.h:
Remove the SPDX tag where the kernel version does not have it.
- tools/include/asm-generic/bitops/__fls.h,
tools/include/asm-generic/bitops/arch_hweight.h,
tools/include/asm-generic/bitops/const_hweight.h,
tools/include/asm-generic/bitops/fls.h,
tools/include/asm-generic/bitops/fls64.h,
tools/include/uapi/asm-generic/ioctls.h,
tools/include/uapi/asm-generic/mman-common.h,
tools/include/uapi/sound/asound.h,
tools/include/uapi/linux/kvm.h,
tools/include/uapi/linux/perf_event.h,
tools/include/uapi/linux/sched.h,
tools/include/uapi/linux/vhost.h,
tools/include/uapi/sound/asound.h:
Add the SPDX tag of the respective kernel header.
- tools/include/uapi/linux/bpf_common.h,
tools/include/uapi/linux/fcntl.h,
tools/include/uapi/linux/hw_breakpoint.h,
tools/include/uapi/linux/mman.h,
tools/include/uapi/linux/stat.h,
Change the tag to the kernel header version:
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
Also sync other header details:
- include/uapi/sound/asound.h:
Fix pointless end of line whitespace noise the header grew in this cycle.
- tools/arch/x86/lib/memcpy_64.S:
Sync the code and add tools/include/asm/export.h with dummy wrappers
to support building the kernel side code in a tooling header environment.
- tools/include/uapi/asm-generic/mman.h,
tools/include/uapi/linux/bpf.h:
Sync other details that don't impact tooling's use of the ABIs.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
IB device index is nldev's handler and it should be checked always.
Fixes: c3f66f7b0052 ("RDMA/netlink: Implement nldev port doit callback")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
[ Applying directly, since Doug fried his SSD's and is rebuilding - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull power management fix from Rafael Wysocki:
"This fixes new breakage introduced by the most recent PM QoS fix in
which, embarrassingly enough, I forgot to update
dev_pm_qos_raw_read_value() to return the right default for devices
with no PM QoS constraints at all which prevents runtime PM from
suspending those devices (fix from Tero Kristo)"
* tag 'pm-urgent-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / QoS: Fix default runtime_pm device resume latency
Pull core fixes from Ingo Molnar:
- workaround for gcc asm handling
- futex race fixes
- objtool build warning fix
- two watchdog fixes: a crash fix (revert) and a bug fix for
/proc/sys/kernel/watchdog_thresh handling.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Prevent GCC from merging annotate_unreachable(), take 2
objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
watchdog/hardlockup/perf: Use atomics to track in-use cpu counter
watchdog/harclockup/perf: Revert a33d44843d45 ("watchdog/hardlockup/perf: Simplify deferred event destroy")
futex: Fix more put_pi_state() vs. exit_pi_state_list() races
A spin lock is used in the irq-mvebu-gicp driver, but it is never
initialized. This patch adds the missing spin_lock_init() call in the
driver's probe function.
Fixes: a68a63cb4dfc ("irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: gregory.clement@free-electrons.com
Acked-by: marc.zyngier@arm.com
Cc: thomas.petazzoni@free-electrons.com
Cc: andrew@lunn.ch
Cc: jason@lakedaemon.net
Cc: nadavh@marvell.com
Cc: miquel.raynal@free-electrons.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: sebastian.hesselbarth@gmail.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171025072326.21030-1-antoine.tenart@free-electrons.com
It turns out that some drivers seem to think it's ok to remap page
ranges from within interrupts and even NMI's. That is definitely not
the case, since the page table build-up is simply not interrupt-safe.
This showed up in the zero-day robot that reported it for the ACPI APEI
GHES ("Generic Hardware Error Source") driver. Normally it had been
hidden by the fact that no page table operations had been needed because
the vmalloc area had been set up by other things.
Apparently due to a recent change to the GHEI driver: commit
77b246b32b2c ("acpi: apei: check for pending errors when probing GHES
entries") 0day actually caught a case during bootup whenthe ioremap
called down to page allocation. But that recent change only showed the
symptom, it wasn't the root cause of the problem.
Hopefully it is limited to just that one driver.
If you need to access random physical memory, you either need to ioremap
in process context, or you need to use the FIXMAP facility to set one
particular fixmap entry to the required mapping - that can be done safely.
Cc: Borislav Petkov <bp@suse.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tyler Baicar <tbaicar@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent change to the PM QoS framework to introduce a proper
no constraint value overlooked to handle the devices which don't
implement PM QoS OPS. Runtime PM is one of the more severely
impacted subsystems, failing every attempt to runtime suspend
a device. This leads into some nasty second level issues like
probe failures and increased power consumption among other
things.
Fix this by adding a proper return value for devices that don't
implement PM QoS.
Fixes: 0cc2b4e5a020 (PM / QoS: Fix device resume latency PM QoS)
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull enforcement statement update from Greg KH:
"Documentation: enforcement-statement: name updates
Here are 12 patches for the kernel-enforcement-statement.rst file that
add new names, fix the ordering of them, remove a duplicate, and
remove some company markings that wished to be removed.
All of these have passed the 0-day testing, even-though it is just a
documentation file update :)"
* tag 'enforcement-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Add Frank Rowand to list of enforcement statement endorsers
doc: add Willy Tarreau to the list of enforcement statement endorsers
Documentation: Add Tim Bird to list of enforcement statement endorsers
Documentation: Add my name to kernel enforcement statement
Documentation: kernel-enforcement-statement.rst: proper sort names
Documentation: Add Arm Ltd to kernel-enforcement-statement.rst
Documentation: kernel-enforcement-statement.rst: Remove Red Hat markings
Documentation: Add myself to the enforcement statement list
Documentation: Sign kernel enforcement statement
Add ack for Trond Myklebust to the enforcement statement
Documentation: update kernel enforcement support list
Documentation: add my name to supporters
This fixes the following warning with GCC 4.6:
mm/migrate.o: warning: objtool: migrate_misplaced_transhuge_page()+0x71: unreachable instruction
The problem is that the compiler merged identical annotate_unreachable()
inline asm blocks, resulting in a missing 'unreachable' annotation.
This problem happened before, and was partially fixed with:
3d1e236022cc ("objtool: Prevent GCC from merging annotate_unreachable()")
That commit tried to ensure that each instance of the
annotate_unreachable() inline asm statement has a unique label. It used
the __LINE__ macro to generate the label number. However, even the line
number isn't necessarily unique when used in an inline function with
multiple callers (in this case, __alloc_pages_node()'s use of
VM_BUG_ON).
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Fixes: 3d1e236022cc ("objtool: Prevent GCC from merging annotate_unreachable()")
Link: http://lkml.kernel.org/r/20171103221941.cajpwszir7ujxyc4@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
864c2357ca89 ("perf/core: Do not set cpuctx->cgrp for unscheduled cgroups")
made list_update_cgroup_event() skip setting cpuctx->cgrp if no cgroup event
targets %current's cgroup.
This breaks perf_event's hierarchical support because events which target one
of the ancestors get ignored.
Fix it by using cgroup_is_descendant() test instead of equality.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org # v4.9+
Fixes: 864c2357ca89 ("perf/core: Do not set cpuctx->cgrp for unscheduled cgroups")
Link: http://lkml.kernel.org/r/20171028164237.GA972780@devbig577.frc2.facebook.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For some odd historical reason, we preprocessed the linker scripts with
"-C", which keeps comments around. That makes no sense, since the
comments are not meaningful for the build anyway.
And it actually breaks things, since linker scripts can't have C++ style
"//" comments in them, so keeping comments after preprocessing now
limits us in odd and surprising ways in our header files for no good
reason.
The -C option goes back to pre-git and pre-bitkeeper times, but seems to
have been historically used (along with "-traditional") for some
odd-ball architectures (ia64, MIPS and SH). It probably didn't matter
back then either, but might possibly have been used to minimize the
difference between the original file and the pre-processed result.
The reason for this may be lost in time, but let's not perpetuate it
only because we can't remember why we did this crazy thing.
This was triggered by the recent addition of SPDX lines to the source
tree, where people apparently were confused about why header files
couldn't use the C++ comment format.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull MMC fixes from Ulf Hansson:
"A couple of MMC host fixes intended for v4.14-rc8:
- renesas_sdhi: fix kernel panic
- tmio: fix swiotlb buffer is full"
* tag 'mmc-v4.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: renesas_sdhi: fix kernel panic in _internal_dmac.c
mmc: tmio: fix swiotlb buffer is full
Pull ARM fixes from Russell King:
- omit EFI memory map sorting, which was recently introduced, but
caused problems with the decompressor due to additional sections
being emitted.
- avoid unaligned load fault-generating instructions in the
decompressor by switching to a private unaligned implementation.
- add a symbol into the decompressor to further debug non-boot
situations (ld's documentation is extremely poor for how "." works,
ld doesn't seem to follow its own documentation!)
- parse endian information to sparse
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: add debug ".edata_real" symbol
ARM: 8716/1: pass endianness info to sparse
efi/libstub: arm: omit sorting of the UEFI memory map
ARM: 8715/1: add a private asm/unaligned.h
This fixes the following warning:
warning: objtool: x86 instruction decoder differs from kernel
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/013315a808ccf5580abc293808827c8e2b5e1354.1509719152.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix memory corruption in the annotation routines because of zero
length symbols (asm ones) (Ravi Bangoria)
- Fix printing garbage as an error message when re-running the
lexer events matcher (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 51204e0639c49ada02fd823782ad673b6326d748.
There wasn't really any good reason for it, and people are complaining
(rightly) that it broke existing practice.
Cc: Len Brown <len.brown@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since this driver checks if the return value of dma_map_sg() is minus
or not and keeps to enable the DMAC, it may cause kernel panic when
the dma_map_sg() returns 0. So, this patch fixes the issue.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull networking fixes from David Miller:
1) Fix route leak in xfrm_bundle_create().
2) In mac80211, validate user rate mask before configuring it. From
Johannes Berg.
3) Properly enforce memory limits in fair queueing code, from Toke
Hoiland-Jorgensen.
4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet.
5) Fix TSO header allocation and management in mvpp2 driver, from Yan
Markman.
6) Don't take socket lock in BH handler in strparser code, from Tom
Herbert.
7) Don't show sockets from other namespaces in AF_UNIX code, from
Andrei Vagin.
8) Fix double free in error path of tap_open(), from Girish Moodalbail.
9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker
and Alexander Duyck.
10) Fix DCB mode programming in stmmac driver, from Jose Abreu.
11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin
Long.
12) Properly align SKB head before building SKB in tuntap, from Jason
Wang.
13) Avoid matching qdiscs with a zero handle during lookups, from Cong
Wang.
14) Fix various endianness bugs in sctp, from Xin Long.
15) Fix tc filter callback races and add selftests which trigger the
problem, from Cong Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
selftests: Introduce a new test case to tc testsuite
selftests: Introduce a new script to generate tc batch file
net_sched: fix call_rcu() race on act_sample module removal
net_sched: add rtnl assertion to tcf_exts_destroy()
net_sched: use tcf_queue_work() in tcindex filter
net_sched: use tcf_queue_work() in rsvp filter
net_sched: use tcf_queue_work() in route filter
net_sched: use tcf_queue_work() in u32 filter
net_sched: use tcf_queue_work() in matchall filter
net_sched: use tcf_queue_work() in fw filter
net_sched: use tcf_queue_work() in flower filter
net_sched: use tcf_queue_work() in flow filter
net_sched: use tcf_queue_work() in cgroup filter
net_sched: use tcf_queue_work() in bpf filter
net_sched: use tcf_queue_work() in basic filter
net_sched: introduce a workqueue for RCU callbacks of tc filter
sctp: fix some type cast warnings introduced since very beginning
sctp: fix a type cast warnings that causes a_rwnd gets the wrong value
sctp: fix some type cast warnings introduced by transport rhashtable
sctp: fix some type cast warnings introduced by stream reconf
...
Pull KVM fixes from Paolo Bonzini:
"Fixes for interrupt controller emulation in ARM/ARM64 and x86, plus a
one-liner x86 KVM guest fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Update APICv on APIC reset
KVM: VMX: Do not fully reset PI descriptor on vCPU reset
kvm: Return -ENODEV from update_persistent_clock
KVM: arm/arm64: vgic-its: Check GITS_BASER Valid bit before saving tables
KVM: arm/arm64: vgic-its: Check CBASER/BASER validity before enabling the ITS
KVM: arm/arm64: vgic-its: Fix vgic_its_restore_collection_table returned value
KVM: arm/arm64: vgic-its: Fix return value for device table restore
arm/arm64: kvm: Disable branch profiling in HYP code
arm/arm64: kvm: Move initialization completion message
arm/arm64: KVM: set right LR register value for 32 bit guest when inject abort
KVM: arm64: its: Fix missing dynamic allocation check in scan_its_table
Pull xen fixes from Juergen Gross:
- a fix for the Xen gntdev device repairing an issue in case of partial
failure of mapping multiple pages of another domain
- a fix of a regression in the Xen balloon driver introduced in 4.13
- a build fix for Xen on ARM which will trigger e.g. for Linux RT
- a maintainers update for pvops (not really Xen, but carrying through
this tree just for convenience)
* tag 'for-linus-4.14c-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
maintainers: drop Chris Wright from pvops
arm/xen: don't inclide rwlock.h directly.
xen: fix booting ballooned down hvm guest
xen/gntdev: avoid out of bounds access in case of partial gntdev_mmap()
We have defined YY_USER_ACTION to keep trace of the column location
during events parsing, but we need to clean it up when we call REJECT.
When REJECT is called, the lexer shrinks the text and re-runs the
matching, so we need to address it in resuming the previous location
value to keep it correct for error display, like:
Before:
$ perf stat -e 'cpu/uops_executed.core,krava/' true
event syntax error: '..38;5;9:mi=01;05;37;41:su=48;5;196;38;5;15:sg=48;5;1\
1;38;5;16:ca=48;5;196;38;5;226:tw=48;5;10;38;5;16:ow=48;5;10;38;5;21:st=48;5;\
21;38;50
�'
\___ unknown term
After:
$ ./perf stat -e 'cpu/uops_executed.core,krava/' true
event syntax error: '..cuted.core,krava/'
\___ unknown term
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vug2hchlny30jfsfrumbym26@git.kernel.org
Link: http://lkml.kernel.org/r/20171009140944.GD28623@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new stack validator in objdump doesn't like directly assigning r11
to rsp, warning with something like:
warning: objtool: chacha20_4block_xor_ssse3()+0xa: unsupported stack pointer realignment
warning: objtool: chacha20_8block_xor_avx2()+0x6: unsupported stack pointer realignment
This fixes things up to use code similar to gcc's DRAP register, so that
objdump remains happy.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the commit de3ee99b097d ("mmc: Delete bounce buffer handling")
deletes the bounce buffer handling, a request data size will be referred
to max_{req,seg}_size instead of MMC_QUEUE_BOUNCESZ (64k bytes).
In other hand, renesas_sdhi_internal_dmac.c will set very big value of
max_{req,seg}_size because the max_blk_count is set to 0xffffffff.
And then, "swiotlb buffer is full" happens because swiotlb can handle
a memory size up to 256k bytes only (IO_TLB_SEGSIZE = 128 and
IO_TLB_SHIFT = 11).
So, as a workaround, this patch avoids the issue by setting
the max_{req,seg}_size up to 256k bytes if swiotlb is running.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull Kbuild fixes from Masahiro Yamada:
- fix O= building on dash
- remove unused dependency in Makefile
- fix default of a choice in Kconfig
- fix typos and documentation style
- fix command options unrecognized by sparse
* tag 'kbuild-fixes-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: clang: fix build failures with sparse check
kbuild doc: a bundle of fixes on makefiles.txt
Makefile: kselftest: fix grammar typo
kbuild: Fix optimization level choice default
kbuild: drop unused symverfile in Makefile.modpost
kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)
Cong Wang says:
====================
net_sched: fix races with RCU callbacks
Recently, the RCU callbacks used in TC filters and TC actions keep
drawing my attention, they introduce at least 4 race condition bugs:
1. A simple one fixed by Daniel:
commit c78e1746d3ad7d548bdf3fe491898cc453911a49
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Wed May 20 17:13:33 2015 +0200
net: sched: fix call_rcu() race on classifier module unloads
2. A very nasty one fixed by me:
commit 1697c4bb5245649a23f06a144cc38c06715e1b65
Author: Cong Wang <xiyou.wangcong@gmail.com>
Date: Mon Sep 11 16:33:32 2017 -0700
net_sched: carefully handle tcf_block_put()
3. Two more bugs found by Chris:
https://patchwork.ozlabs.org/patch/826696/
https://patchwork.ozlabs.org/patch/826695/
Usually RCU callbacks are simple, however for TC filters and actions,
they are complex because at least TC actions could be destroyed
together with the TC filter in one callback. And RCU callbacks are
invoked in BH context, without locking they are parallel too. All of
these contribute to the cause of these nasty bugs.
Alternatively, we could also:
a) Introduce a spinlock to serialize these RCU callbacks. But as I
said in commit 1697c4bb5245 ("net_sched: carefully handle
tcf_block_put()"), it is very hard to do because of tcf_chain_dump().
Potentially we need to do a lot of work to make it possible (if not
impossible).
b) Just get rid of these RCU callbacks, because they are not
necessary at all, callers of these call_rcu() are all on slow paths
and holding RTNL lock, so blocking is allowed in their contexts.
However, David and Eric dislike adding synchronize_rcu() here.
As suggested by Paul, we could defer the work to a workqueue and
gain the permission of holding RTNL again without any performance
impact, however, in tcf_block_put() we could have a deadlock when
flushing workqueue while hodling RTNL lock, the trick here is to
defer the work itself in workqueue and make it queued after all
other works so that we keep the same ordering to avoid any
use-after-free. Please see the first patch for details.
Patch 1 introduces the infrastructure, patch 2~12 move each
tc filter to the new tc filter workqueue, patch 13 adds
an assertion to catch potential bugs like this, patch 14
closes another rcu callback race, patch 15 and patch 16 add
new test cases.
====================
Reported-by: Chris Mi <chrism@mellanox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ARM SoC fixes from Arnd Bergmann:
"Only two patches came in over the last two weeks: Uniphier USB support
needs additional clocks enabled (on both 32-bit and 64-bit ARM), and a
Marvell MVEBU stability issue has been fixed"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: mvebu: pl310-cache disable double-linefill
arm64: dts: uniphier: add STDMAC clock to EHCI nodes
ARM: dts: uniphier: add STDMAC clock to EHCI nodes
ARM depends on the macros '__ARMEL__' & '__ARMEB__' being defined
or not to correctly select or define endian-specific macros,
structures or pieces of code.
These macros are predefined by the compiler but sparse knows
nothing about them and thus may pre-process files differently
from what gcc would.
Fix this by passing '-D__ARMEL__' or '-D__ARMEB__' to sparse,
depending on the endianness of the kernel, like defined by GCC.
Note: In most case it won't change anything since most ARMs use
little-endian (but an allyesconfig would use big-endian!).
To: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Guenter reported:
There is still a problem. When running
echo 6 > /proc/sys/kernel/watchdog_thresh
echo 5 > /proc/sys/kernel/watchdog_thresh
repeatedly, the message
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
stops after a while (after ~10-30 iterations, with fluctuations).
Maybe watchdog_cpus needs to be atomic ?
That's correct as this again is affected by the asynchronous nature of the
smpboot thread unpark mechanism.
CPU 0 CPU1 CPU2
write(watchdog_thresh, 6)
stop()
park()
update()
start()
unpark()
thread->unpark()
cnt++;
write(watchdog_thresh, 5) thread->unpark()
stop()
park() thread->park()
cnt--; cnt++;
update()
start()
unpark()
That's not a functional problem, it just affects the informational message.
Convert watchdog_cpus to atomic_t to prevent the problem
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20171101181126.j727fqjmdthjz4xk@redhat.com
Pull ARC fixes from Vineet Gupta:
- Fixes for HSDK platform
- module build error for !LLSC config
* tag 'arc-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: unbork module link errors with !CONFIG_ARC_HAS_LLSC
ARC: [plat-hsdk] Increase SDIO CIU frequency to 50000000Hz
ARC: [plat-hsdk] select CONFIG_RESET_HSDK from Kconfig
Perf top is often crashing at very random locations on powerpc. After
investigating, I found the crash only happens when sample is of zero
length symbol. Powerpc kernel has many such symbols which does not
contain length details in vmlinux binary and thus start and end
addresses of such symbols are same.
Structure
struct sym_hist {
u64 nr_samples;
u64 period;
struct sym_hist_entry addr[0];
};
has last member 'addr[]' of size zero. 'addr[]' is an array of addresses
that belongs to one symbol (function). If function consist of 100
instructions, 'addr' points to an array of 100 'struct sym_hist_entry'
elements. For zero length symbol, it points to the *empty* array, i.e.
no members in the array and thus offset 0 is also invalid for such
array.
static int __symbol__inc_addr_samples(...)
{
...
offset = addr - sym->start;
h = annotation__histogram(notes, evidx);
h->nr_samples++;
h->addr[offset].nr_samples++;
h->period += sample->period;
h->addr[offset].period += sample->period;
...
}
Here, when 'addr' is same as 'sym->start', 'offset' becomes 0, which is
valid for normal symbols but *invalid* for zero length symbols and thus
updating h->addr[offset] causes memory corruption.
Fix this by adding one dummy element for zero length symbols.
Link: https://lkml.org/lkml/2016/10/10/148
Fixes: edee44be5919 ("perf annotate: Don't throw error for zero length symbols")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1508854806-10542-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
It's possible for a user to deliberately trigger __dump_instr with a
chosen kernel address.
Let's avoid problems resulting from this by using get_user() rather than
__get_user(), ensuring that we don't erroneously access kernel memory.
Where we use __dump_instr() on kernel text, we already switch to
KERNEL_DS, so this shouldn't adversely affect those cases.
Fixes: 60ffc30d5652810d ("arm64: Exception handling")
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The shash ahash digest adaptor function may crash if given a
zero-length input together with a null SG list. This is because
it tries to read the SG list before looking at the length.
This patch fixes it by checking the length first.
Cc: <stable@vger.kernel.org>
Reported-by: Stephan Müller<smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Stephan Müller <smueller@chronox.de>
The default for d3_retune is true, but that was not being set in all cases,
which results in eMMC errors because re-tuning has not been done.
Fix by initializing d3_retune to true.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: c959a6b00ff5 ("mmc: sdhci-pci: Don't re-tune with runtime pm for some Intel devices")
Cc: stable@vger.kernel.org # v4.12+
Reported-and-tested-by: ojab <ojab@ojab.ru>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull input fixes from Dmitry Torokhov:
- fix gtco tablet driver, tightening parsing of HID descriptors
- add ACPI ID added to Elan driver to be able to handle touchpads found
in Lenovo Ideapad 320/520
- fix the Symaptics RMI4 driver to adjust handling of buttons
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - limit the range of what GPIOs are buttons
Input: gtco - fix potential out-of-bound access
Input: elan_i2c - add ELAN0611 to the ACPI table
We should avoid using the space character when passing arguments to
clang, because static code analysis check tool such as sparse may
misinterpret the arguments followed by spaces as build targets hence
cause the build to fail.
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Xin Long says:
====================
sctp: a bunch of fixes for some sparse warnings
As Eric noticed, when running 'make C=2 M=net/sctp/', a plenty of
warnings or errors checked by sparse appear. They are all problems
about Endian and type cast.
Most of them are just warnings by which no issues could be caused
while some might be bugs.
This patchset fixes them with four patches basically according to
how they are introduced.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In this patchset, we fixed a tc bug. This patch adds the test case
that reproduces the bug. To run this test case, user should specify
an existing NIC device:
# sudo ./tdc.py -d enp4s0f0
This test case belongs to category "flower". If user doesn't specify
a NIC device, the test cases belong to "flower" will not be run.
In this test case, we create 1M filters and all filters share the same
action. When destroying all filters, kernel should not panic. It takes
about 18s to run it.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull MIPS fixes from James Hogan:
"A selection of important MIPS fixes for 4.14, and some MAINTAINERS /
email address updates:
Maintainership updates:
- imgtec.com -> mips.com email addresses (this trivially updates
comments in quite a few files, as well as MAINTAINERS)
- Pistachio SoC maintainership update
Fixes:
- NI 169445 build (new platform in 4.14)
- EVA regression (4.14)
- SMP-CPS build & preemption regressions (4.14)
- SMP/hotplug deadlock & race (deadlock reintroduced 4.13)
- ebpf_jit error return (4.13)
- SMP-CMP build regressions (4.11 and 4.14)
- bad UASM microMIPS encoding (3.16)
- CM definitions (3.15)"
[ I had taken the email address updates separately, because I didn't
expect James to send a pull request, so those got applied twice. - Linus]
* tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: Update email address for Marcin Nowakowski
MIPS: smp-cmp: Fix vpe_id build error
MAINTAINERS: Update Pistachio platform maintainers
MIPS: smp-cmp: Use right include for task_struct
MIPS: Update Goldfish RTC driver maintainer email address
MIPS: Update RINT emulation maintainer email address
MIPS: CPS: Fix use of current_cpu_data in preemptible code
MIPS: SMP: Fix deadlock & online race
MIPS: bpf: Fix a typo in build_one_insn()
MIPS: microMIPS: Fix incorrect mask in insn_table_MM
MIPS: Fix CM region target definitions
MIPS: generic: Fix compilation error from include asm/mips-cpc.h
MIPS: Fix exception entry when CONFIG_EVA enabled
MIPS: generic: Fix NI 169445 its build
Update MIPS email addresses
In kvm_apic_set_state() we update the hardware virtualized APIC after
the full APIC state has been overwritten. Do the same, when the full
APIC state has been reset in kvm_lapic_reset().
This updates some hardware state that was previously forgotten, as
far as I can tell. Also, this allows removing some APIC-related reset
code from vmx_vcpu_reset().
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>