* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: set flow handler for secondary interrupt controller of 5249
m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support
m68knommu: fix dereference of port.tty
m68knommu: add missing linker __modver section
m68knommu: fix mis-named variable int set_irq_chip loop
m68knommu: add optimize memmove() function
m68k: remove arch specific non-optimized memcmp()
m68knommu: fix use of un-defined _TIF_WORK_MASK
m68knommu: Rename m548x_wdt.c to m54xx_wdt.c
m68knommu: fix m548x_wdt.c compilation after headers renaming
m68knommu: Remove dependencies on nonexistent M68KNOMMU

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits)
drm/radeon/kms: hopefully fix pll issues for real (v3)
drm/radeon/kms: add bounds checking to avivo pll algo
drm: fix wrong usages of drm_device in DRM Developer's Guide
drm/radeon/kms: fix a few more atombios endian issues
drm/radeon/kms: improve 6xx/7xx CS error output
drm/radeon/kms: check AA resolve registers on r300
drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300
drm/radeon/kms: use linear aligned for evergreen/ni bo blits
drm/radeon/kms: use linear aligned for 6xx/7xx bo blits
drm/radeon: fix race between GPU reset and TTM delayed delete thread.
drm/radeon/kms: evergreen/ni big endian fixes (v2)
drm/radeon/kms: 6xx/7xx big endian fixes
drm/radeon/kms: atombios big endian fixes
drm/radeon: 6xx/7xx non-kms endian fixes
drm/radeon/kms: optimize CS state checking for r100->r500
drm: do not leak kernel addresses via /proc/dri/*/vma
drm/radeon/kms: add connector table for mac g5 9600
radeon mkregtable: Add missing fclose() calls
drm/radeon/kms: fix interlaced modes on dce4+
drm/radeon: fix memory debugging since d961db75ce86a84f1f04e91ad1014653ed7d9f46
...

The secondary interrupt controller of the ColdFire 5249 code is not
setting the edge triggered flow handler. Set it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
pci: use security_capable() when checking capablities during config space read

The problematic boards have a recommended reference divider
to be used when spread spectrum is enabled on the laptop panel.
Enable the use of the recommended reference divider along with
the new pll algo.

v2: testing options

v3: When using the fixed reference divider with LVDS, prefer
min m to max p and use fractional feedback dividers.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=28852
https://bugzilla.kernel.org/show_bug.cgi?id=24462
https://bugzilla.kernel.org/show_bug.cgi?id=26552
MacbookPro issues reported by Justin Mattock <justinmattock@gmail.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq
subsystem. Remove obsolete use of it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

Transparent hugepages can only be created if rmap is fully
functional. So we must prevent hugepages to be created while
is_vma_temporary_stack() is true.

This also optmizes away some harmless but unnecessary setting of
khugepaged_scan.address and it switches some BUG_ON to VM_BUG_ON.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reintroduces commit 47970b1b which was subsequently reverted
as f00eaeea. The original change was broken and caused X startup
failures and generally made privileged processes incapable of reading
device dependent config space. The normal capable() interface returns
true on success, but the LSM interface returns 0 on success. This thinko
is now fixed in this patch, and has been confirmed to work properly.

So, once again...Eric Paris noted that commit de139a3 ("pci: check caps
from sysfs file open to read device dependent config space") caused the
capability check to bypass security modules and potentially auditing.
Rectify this by calling security_capable() when checking the open file's
capabilities for config space reads.

Reported-by: Eric Paris <eparis@redhat.com>
Tested-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Alex Riesen <raa.lkml@gmail.com>
Cc: Sedat Dilek <sedat.dilek@googlemail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: James Morris <jmorris@namei.org>

Prevent divider overflow.
Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=28932

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

The struct_tty associated with a port is now a direct pointer
from within the local private driver info struct. So fix all uses
of it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI / Video: Probe for output switch method when searching video devices.
ACPI / Wakeup: Enable button GPEs unconditionally during initialization
ACPI / ACPICA: Avoid crashing if _PRW is defined for the root object
ACPI: Fix acpi_os_read_memory() and acpi_os_write_memory() (v2)

Commit c0e69a5bbc6f ("klist.c: bit 0 in pointer can't be used as flag")
intended to make sure that all klist objects were at least pointer size
aligned, but used the constant "4" which only works on 32-bit.

Use "sizeof(void *)" which is correct in all cases.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: stable <stable@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A few wrong usages of drm_device, which should be drm_driver.

Signed-off-by: Xiao Jiang <jgq516@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Add missing linker section __modver to fix:

LD vmlinux
/usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver'

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

* 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
tools: turbostat: style updates
tools: turbostat: fix bitwise and operand

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
devicetree-discuss is moderated for non-subscribers
MAINTAINERS: Add entry for GPIO subsystem
dt: add documentation of ARM dt boot interface
dt: Remove obsolete description of powerpc boot interface
dt: Move device tree documentation out of powerpc directory
spi/spi_sh_msiof: fix wrong address calculation, which leads to an Oops

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Compiling for 68360 targets gives:

CC arch/m68knommu/platform/68360/ints.o
arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’:
arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function)
arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in

Fix variable name used.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (21 commits)
dmaengine: add slave-dma maintainer
dma: ipu_idmac: do not lose valid received data in the irq handler
dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg()
dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop()
dmaengine: imx-sdma: return sdmac->status in sdma_tx_status()
dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg()
dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg()
dmaengine i.MX dma: initialize dma capabilities outside channel loop
dmaengine i.MX DMA: do not initialize chan_id field
dmaengine i.MX dma: check sg entries for valid addresses and lengths
dmaengine i.MX dma: set maximum segment size for our device
dmaengine i.MX SDMA: reserve channel 0 by not registering it
dmaengine i.MX SDMA: initialize dma capabilities outside channel loop
dmaengine i.MX SDMA: do not initialize chan_id field
dmaengine i.MX sdma: check sg entries for valid addresses and lengths
dmaengine i.MX sdma: set maximum segment size for our device
DMA: PL08x: fix channel pausing to timeout rather than lockup
DMA: PL08x: fix infinite wait when terminating transfers
dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie()
dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0
...

Follow kernel coding style traditions more closely.
Delete typedef, re-name "per cpu counters" to
simply be counters etc.

This patch changes no functionality.

Suggested-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

This patch reverts one hunk of 677bd810eedce61edf15452491781ff046b92edc
"ACPI video: remove output switching control", namely the removal of
probing for _DOS/_DOD when searching for video devices.

This is needed on some Fujitsu Laptops (at least S7110, P8010) for the
ACPI backlight interface to work, as an these machines, neither ROM nor
posting methods are available, and after removal of output switching,
none of the caps triggers, which prevents the backlight search from
being entered.

Tested on a Fujitsu Lifebook S7110 and Fujitsu Lifebook P8010.
This probably fixes https://bugzilla.kernel.org/show_bug.cgi?id=27312
for the people who have no entry in /sys/class/backlight.

This is the complete list of public (starting with "_") methods implemented
on the S7110, BIOS rev 1.34:

\_SB_.PCI0.GFX0._ADR
\_SB_.PCI0.GFX0._DOS
\_SB_.PCI0.GFX0._DOD
\_SB_.PCI0.GFX0.CRT._ADR
\_SB_.PCI0.GFX0.CRT._DCS
\_SB_.PCI0.GFX0.CRT._DGS
\_SB_.PCI0.GFX0.CRT._DSS
\_SB_.PCI0.GFX0.LCD._ADR
\_SB_.PCI0.GFX0.LCD._BCL
\_SB_.PCI0.GFX0.LCD._BCM
\_SB_.PCI0.GFX0.LCD._BQC
\_SB_.PCI0.GFX0.LCD._DCS
\_SB_.PCI0.GFX0.LCD._DGS
\_SB_.PCI0.GFX0.LCD._DSS
\_SB_.PCI0.GFX0.LCD._PS0
\_SB_.PCI0.GFX0.LCD._PS3
\_SB_.PCI0.GFX0.TV._ADR
\_SB_.PCI0.GFX0.TV._DCS
\_SB_.PCI0.GFX0.TV._DGS
\_SB_.PCI0.GFX0.TV._DSS
\_SB_.PCI0.GFX0.DVI._ADR
\_SB_.PCI0.GFX0.DVI._DCS
\_SB_.PCI0.GFX0.DVI._DGS
\_SB_.PCI0.GFX0.DVI._DSS

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The functions acpi_os_read_memory() and acpi_os_write_memory() do
two wrong things. First, they shouldn't call rcu_read_unlock()
before the looked up address is actually used for I/O, because in
that case the iomap it belongs to may be removed before the I/O
is done. Second, if they have to create a new mapping, they should
check the returned virtual address and tell the caller that the
operation failed if it is NULL (in fact, I think they even should not
attempt to map an address that's not present in one of the existing
ACPI iomaps, because that may cause problems to happen when they are
called from nonpreemptible context and their callers ought to know
what they are doing and map the requisite memory regions beforehand).

Make these functions call rcu_read_unlock() when the I/O is complete
(or if it's necessary to map the given address "on the fly") and
return an error code if the requested physical address is not present
in the existing ACPI iomaps and cannot be mapped.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - add quirk for Ordissimo EVE using a realtek ALC662
ALSA: hrtimer: remove superfluous tasklet invocation
ALSA: hrtimer: handle delayed timer interrupts
ALSA: HDA: Add subwoofer quirk for Acer Aspire 8942G
ALSA: hda - Don't handle empty patch files
ALSA: hda - Fix missing CA initialization for HDMI/DP
ALSA: usbaudio - Enable the E-MU 0204 USB
ALSA: hda - switch lfe with side in mixer for 4930g
ASoC: Improve WM8994 digital power sequencing
ASoC: Create an AIF1ADCDAT signal widget to match AIF2
asoc: davinci: da830/omap-l137: correct cpu_dai_name
ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()

* 'intel/drm-intel-fixes' of /ssd/git/drm-next:
drm/i915: Fix resume regression from 5d1d0cc
drm/i915/tv: Use polling rather than interrupt-based hotplug
drm/i915: Trigger modesetting if force-audio changes
drm/i915/sdvo: If we have an EDID confirm it matches the mode of the connection
drm/i915: Disable RC6 on Ironlake
drm/i915/lvds: Restore dithering on native modes for gen2/3
drm/i915: Invalidate TLB caches on SNB BLT/BSD rings

Add an m68k/coldfire optimized memmove() function for the m68knommu arch.
This is the same function as used by m68k. Simple speed tests show this
is faster once buffers are larger than 4 bytes, and significantly faster
on much larger buffers (4 times faster above about 100 bytes).

This also goes part of the way to fixing a regression caused by commit
ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and
non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is
the 68x328 and 68360 families). They currently have no memmove() fucntion
defined, since there was none in the m68knommu/lib functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux:
nfsd: break lease on unlink due to rename
nfsd4: acquire only one lease per file
nfsd4: modify fi_delegations under recall_lock
nfsd4: remove unused deleg dprintk's.
nfsd4: split lease setting into separate function
nfsd4: fix leak on allocation error
nfsd4: add helper function for lease setup
nfsd4: split up nfsd_break_deleg_cb
NFSD: memory corruption due to writing beyond the stat array
NFSD: use nfserr for status after decode_cb_op_status
nfsd: don't leak dentry count on mnt_want_write failure

Slave-dma has become the predominant usage model for dmaengine and needs
special attention. Memory-to-memory dma usage cases will continue to be
maintained by Dan.

Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

bug could cause false positive on indicating
presence of invarient TSC or APERF support.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

Commit 9630bdd (ACPI: Use GPE reference counting to support shared
GPEs) introduced a suspend regression where boxes resume immediately
after being suspended due to the lid or sleep button wakeup status
not being cleared properly. This happens if the GPEs corresponding
to those devices are not enabled all the time, which apparently is
expected by some BIOSes.

To fix this problem, enable button and lid GPEs unconditionally
during initialization and keep them enabled all the time, regardless
of whether or not the ACPI button driver is used.

References: https://bugzilla.kernel.org/show_bug.cgi?id=27372
Reported-and-tested-by: Ferenc Wágner <wferi@niif.hu>
Cc: stable@kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

This reverts commit 47970b1b2aa64464bc0a9543e86361a622ae7c03.

It turns out it breaks several distributions. Looks like the stricter
selinux checks fail due to selinux policies not being set to allow the
access - breaking X, but also lspci.

So while the change was clearly the RightThing(tm) to do in theory, in
practice we have backwards compatibility issues making it not work.

Reported-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: David Airlie <airlied@linux.ie>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I'll probably regret this....

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Makes debugging CS rejections much easier.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

The irony of the patch to fix the resume regression on PineView causing
a further regression on Ironlake is not lost on me.

Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-by: Björn Schließmann <chronoss@gmx.de>
Tested-by: Björn Schließmann <chronoss@gmx.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28802
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

The m68k arch implements its own memcmp() function. It is not optimized
in any way (it is the most strait forward coding of memcmp you can get).
Remove it and use the kernels standard memcmp() implementation.

This also goes part of the way to fixing a regression caused by commit
ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and
non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is
the 68x328 and 68360 families). They currently have no memcmp() function
defined, since there is none in the m68knommu/lib functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
Revert "lockdep, timer: Fix del_timer_sync() annotation"

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timer debug: Hide kernel addresses via %pK in /proc/timer_list

4795bb37effb7b8fe77e2d2034545d062d3788a8 "nfsd: break lease on unlink,
link, and rename", only broke the lease on the file that was being
renamed, and didn't handle the case where the target path refers to an
already-existing file that will be unlinked by a rename--in that case
the target file should have any leases broken as well.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
deb-pkg: Fix building outside of source tree (O=...).
deb-pkg: Use $SRCARCH for include path

Some ACPI BIOSes define _PRW for the root object which causes
acpi_setup_gpe_for_wake() to crash when trying to dereference the
bogus device_node pointer. Avoid the crash by checking if
wake_device is not the root object before attempting to set up the
"implicit notify" mechanism for it.

The problem was introduced by commit bba63a296ffab20e08d9e8252d2f0d99
(ACPICA: Implicit notify support) that added the wake_device argument
to acpi_setup_gpe_for_wake().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

* master.kernel.org:/home/rmk/linux-2.6-arm:
ALSA: AACI: allow writes to MAINCR to take effect
ARM: Update mach-types
ARM: 6652/1: ep93xx: correct the end address of the AC97 memory resource
ARM: mxs/imx28: remove now unused clock lookup "fec.0"
ARM: mxs: fix clock base address missing
ARM: mxs: acknowledge gpio irq
ARM: mach-imx/mach-mx25_3ds: Fix section type
ARM: imx: Add VPR200 and MX51_3DS entries to uncompress.h
ARM i.MX23: use correct register for setting the rate
ARM i.MX23/28: remove secondary field from struct clk. It's unused
ARM i.MX28: use correct register for setting the rate
ARM i.MX28: fix bit operation

I'll probably regret this....

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This netbook has a only one jack output and an internal mic.

By default, mic and jack sense aren't working. Using lenovo-101e
parameters makes both work.

The device seems based on a Sharetronic Q70, so this should fix audio for
this model too.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

On WM8994 revision D and earlier ensure optimal sequencing with
simultaneous usage of AIF1 and AIF2 by tying the signals together
so if paths through both are connected the streams are started
simultaneously.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org

NULL + <small offset> != NULL, but reading from that <small offset> address
is usually not a very good idea and often leads to problems, like kernel
Oopses in this case, easily reproducible by writing to an SD-card, used in
SPI mode.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

v3: added details to Documentation/arm/Booting

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

This is an important security fix because we allowed arbitrary values
to be passed to AARESOLVE_OFFSET. This also puts the right buffer address
in the register.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The documentation recommends that we should use a polling method for TV
detection as this is more power efficient than the interrupt based
mechanism (as the encoder can be completely switched off). A secondary
effect is that leaving the hotplug enabled seems to be causing pipe
underruns as reported by Hugh Dickins on his Crestline.

Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[This is a candidate for stable, but needs minor porting to 2.6.37]

The _TIF_WORK_MASK definition was removed in the clean up of MMU and
non-MMU arch/m68k/include/asm/thread_info*.h files (this was commit
cddafa3500fde4a07e5bf899ec97a04069f8f7ce, "merge MMU and non-MMU
thread_info.h").

It didn't get cleaned out of the entry.S code for the 68328 and 68360
based platforms. And it was replaced by a hard coded constant mask for
coldfire platforms. There is currently no need to mask any of these bits,
so fix all uses (and former uses) to check for any non-zero value.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix text_poke_smp_batch() deadlock
perf tools: Fix thread_map event synthesizing in top and record
watchdog, nmi: Lower the severity of error messages
ARM: oprofile: Fix backtraces in timer mode
oprofile: Fix usage of CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends

Both attempts at trying to allow softirq usage for
del_timer_sync() failed (produced bogus warnings),
so revert the commit for this release:

f266a5110d45: lockdep, timer: Fix del_timer_sync() annotation

and try again later.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1297174680.13327.107.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In the continuing effort to avoid kernel addresses leaking to
unprivileged users, this patch switches to %pK for
/proc/timer_list reporting.

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110212032125.GA23571@outflux.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Instead of acquiring one lease each time another client opens a file,
nfsd can acquire just one lease to represent all of them, and reference
count it to determine when to release it.

This fixes a regression introduced by
c45821d263a8a5109d69a9e8942b8d65bcd5f31a "locks: eliminate fl_mylease
callback": after that patch, only the struct file * is used to determine
who owns a given lease. But since we recently converted the server to
share a single struct file per open, if we acquire multiple leases on
the same file from nfsd, it then becomes impossible on unlocking a lease
to determine which of those leases (all of whom share the same struct
file *) we meant to remove.

Thanks to Takashi Iwai <tiwai@suse.de> for catching a bug in a previous
version of this patch.

Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Currently when two or more buffers are queued by the camera driver
and so the double buffering is enabled in the idmac, we lose one
frame comming from CSI since the reporting of arrival of the first
frame is deferred by the DMAIC_7_EOF interrupt handler and reporting
of the arrival of the last frame is not done at all. So when requesting
N frames from the image sensor we actually receive N - 1 frames in
user space.

The reason for this behaviour is that the DMAIC_7_EOF interrupt
handler misleadingly assumes that the CUR_BUF flag is pointing to the
buffer used by the IDMAC. Actually it is not the case since the
CUR_BUF flag will be flipped by the FSU when the FSU is sending the
<TASK>_NEW_FRM_RDY signal when new frame data is delivered by the CSI.
When sending this singal, FSU updates the DMA_CUR_BUF and the
DMA_BUFx_RDY flags: the DMA_CUR_BUF is flipped, the DMA_BUFx_RDY
is cleared, indicating that the frame data is beeing written by
the IDMAC to the pointed buffer. DMA_BUFx_RDY is supposed to be
set to the ready state again by the MCU, when it has handled the
received data. DMAIC_7_CUR_BUF flag won't be flipped here by the
IPU, so waiting for this event in the EOF interrupt handler is wrong.
Actually there is no spurious interrupt as described in the comments,
this is the valid DMAIC_7_EOF interrupt indicating reception of the
frame from CSI.

The patch removes code that waits for flipping of the DMAIC_7_CUR_BUF
flag in the DMAIC_7_EOF interrupt handler. As the comment in the
current code denotes, this waiting doesn't help anyway. As a result
of this removal the reporting of the first arrived frame is not
deferred to the time of arrival of the next frame and the drivers
software flag 'ichan->active_buffer' is in sync with DMAIC_7_CUR_BUF
flag, so the reception of all requested frames works.

This has been verified on the hardware which is triggering the
image sensor by the programmable state machine, allowing to
obtain exact number of frames. On this hardware we do not tolerate
losing frames.

This patch also removes resetting the DMA_BUFx_RDY flags of
all channels in ipu_disable_channel() since transfers on other
DMA channels might be triggered by other running tasks and the
buffers should always be ready for data sending or reception.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>