tjh.dev
commits
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
For gettimeofday, -ffixed-r30 was passed to work around a bug in Go
code, where the vDSO trampoline forgot to save and restore this register
across function calls. But Go requires a different trampoline for every
call, and there's no reason that new Go code needs to be broken and add
more bugs. So remove -ffixed-r30 for getrandom.
Fixes: 8072b39c3a75 ("powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240925175021.1526936-2-Jason@zx2c4.com
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a94222db ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver reports that the kvm_has_feat() helper is not behaviing as
expected for negative feature. On investigation, the main issue
seems to be caused by the following construct:
#define get_idreg_field(kvm, id, fld) \
(id##_##fld##_SIGNED ? \
get_idreg_field_signed(kvm, id, fld) : \
get_idreg_field_unsigned(kvm, id, fld))
where one side of the expression evaluates as something signed,
and the other as something unsigned. In retrospect, this is totally
braindead, as the compiler converts this into an unsigned expression.
When compared to something that is 0, the test is simply elided.
Epic fail. Similar issue exists in the expand_field_sign() macro.
The correct way to handle this is to chose between signed and unsigned
comparisons, so that both sides of the ternary expression are of the
same type (bool).
In order to keep the code readable (sort of), we introduce new
comparison primitives taking an operator as a parameter, and
rewrite the kvm_has_feat*() helpers in terms of these primitives.
Fixes: c62d7a23b947 ("KVM: arm64: Add feature checking helpers")
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Oliver Upton <oliver.upton@linux.dev>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241002204239.2051637-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull xen fix from Juergen Gross:
"Fix Xen config issue introduced in the merge window"
* tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix config option reference in XEN_PRIVCMD definition
Initially it was thought that we just wanted to ignore errors from
logged op replay, but it turns out we do need to catch -EROFS, or we'll
go into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been a while since James had any significant bandwidth to
review KVM/arm64 patches. But in the meantime, Joey has stepped up
and did a really good job reviewing some terrifying patch series.
Having talked with the interested parties, it appears that James
is unlikely to have time for KVM in the near future, and that Joey
is willing to take more responsibilities.
So let's appoint Joey as an official reviewer, and give James some
breathing space, as well as my personal thanks. I'm sure he will
be back one way or another!
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240927104956.1223658-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull ext4 fixes from Ted Ts'o:
"Fix some ext4 bugs and regressions relating to oneline resize and fast
commits"
* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off by one issue in alloc_flex_gd()
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
ext4: use handle to mark fc as ineligible in __track_dentry_update()
Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition,
referring to CONFIG_XEN_PCIDEV_BACKEND. In Kconfig files, one refers to
config options without the CONFIG prefix, though. So in its current form,
this does not create the reverse dependency as intended, but is an
attribute with no effect.
Refer to the intended config option XEN_PCIDEV_BACKEND in the XEN_PRIVCMD
definition.
Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240930090650.429813-1-lukas.bulwahn@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
These shouldn't always be fatal errors - logged op resume, in
particular, and we want it as a parameter there.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As was tried in commit 4e103134b862 ("KVM: x86/mmu: Zap only the relevant
pages when removing a memslot"), all shadow pages, i.e. non-leaf SPTEs,
need to be zapped. All of the accounting for a shadow page is tied to the
memslot, i.e. the shadow page holds a reference to the memslot, for all
intents and purposes. Deleting the memslot without removing all relevant
shadow pages, as is done when KVM_X86_QUIRK_SLOT_ZAP_ALL is disabled,
results in NULL pointer derefs when tearing down the VM.
Reintroduce from that commit the code that walks the whole memslot when
there are active shadow MMU pages.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When pKVM saves and restores the host floating point state on a SVE system,
it programs the vector length in ZCR_EL2.LEN to be whatever the maximum VL
for the PE is. But it uses a buffer allocated with kvm_host_sve_max_vl, the
maximum VL shared by all PEs in the system. This means that if we run on a
system where the maximum VLs are not consistent, we will overflow the buffer
on PEs which support larger VLs.
Since the host will not currently attempt to make use of non-shared VLs, fix
this by explicitly setting the EL2 VL to be the maximum shared VL when we
save and restore. This will enforce the limit on host VL usage. Should we
wish to support asymmetric VLs, this code will need to be updated along with
the required changes for the host:
https://lore.kernel.org/r/20240730-kvm-arm64-fix-pkvm-sve-vl-v6-0-cae8a2e0bd66@kernel.org
Fixes: b5b9955617bc ("KVM: arm64: Eagerly restore host fpsimd/sve state in pKVM")
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240912-kvm-arm64-limit-guest-vl-v2-1-dd2c29cb2ac9@kernel.org
[maz: added punctuation to the commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull cxl fix from Ira Weiny:
- Fix calculation for SBDF in error injection
* tag 'cxl-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
EINJ, CXL: Fix CXL device SBDF calculation
Wesley reported an issue:
==================================================================
EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks
------------[ cut here ]------------
kernel BUG at fs/ext4/resize.c:324!
CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27
RIP: 0010:ext4_resize_fs+0x1212/0x12d0
Call Trace:
__ext4_ioctl+0x4e0/0x1800
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0x99/0xd0
x64_sys_call+0x1206/0x20d0
do_syscall_64+0x72/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
While reviewing the patch, Honza found that when adjusting resize_bg in
alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than
flexbg_size.
The reproduction of the problem requires the following:
o_group = flexbg_size * 2 * n;
o_size = (o_group + 1) * group_size;
n_group: [o_group + flexbg_size, o_group + flexbg_size * 2)
o_size = (n_group + 1) * group_size;
Take n=0,flexbg_size=16 as an example:
last:15
|o---------------|--------------n-|
o_group:0 resize to n_group:30
The corresponding reproducer is:
img=test.img
rm -f $img
truncate -s 600M $img
mkfs.ext4 -F $img -b 1024 -G 16 8M
dev=`losetup -f --show $img`
mkdir -p /tmp/test
mount $dev /tmp/test
resize2fs $dev 248M
Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE()
to prevent the issue from happening again.
[ Note: another reproucer which this commit fixes is:
img=test.img
rm -f $img
truncate -s 25MiB $img
mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img
truncate -s 3GiB $img
dev=`losetup -f --show $img`
mkdir -p /tmp/test
mount $dev /tmp/test
resize2fs $dev 3G
umount $dev
losetup -d $dev
-- TYT ]
Reported-by: Wesley Hershberger <wesley.hershberger@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2081231
Reported-by: Stéphane Graber <stgraber@stgraber.org>
Closes: https://lore.kernel.org/all/20240925143325.518508-1-aleksandr.mikhalitsyn@canonical.com/
Tested-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Tested-by: Eric Sandeen <sandeen@redhat.com>
Fixes: 665d3e0af4d3 ("ext4: reduce unnecessary memory allocation in alloc_flex_gd()")
Cc: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240927133329.1015041-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It was initially believed that it would be better to be explicit about
the snapshot we're updating when writing inodes in fsck; however, it
turns out that passing around the snapshot separately is more error
prone and we're usually updating the inode in the same snapshow we read
it from.
This is different from normal filesystem paths, where we do the update
in the snapshot of the subvolume we're in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
The recent addition of support for testing with the x86 specific quirk
KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the
build of the KVM selftests for all other architectures:
In file included from include/kvm_util.h:8,
from include/memstress.h:13,
from memslot_modification_stress_test.c:21:
memslot_modification_stress_test.c: In function ‘main’:
memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function)
176 | KVM_X86_QUIRK_SLOT_ZAP_ALL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add __x86_64__ guard defines to avoid building the relevant code on other
architectures.
Fixes: 61de4c34b51c ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled")
Fixes: 218f6415004a ("KVM: selftests: Allow slot modification stress test with quirk disabled")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On an error, hyp_vcpu will be accessed while this memory has already
been relinquished to the host and unmapped from the hypervisor. Protect
the CPTR assignment with an early return.
Fixes: b5b9955617bc ("KVM: arm64: Eagerly restore host fpsimd/sve state in pKVM")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20240919110500.2345927-1-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull i2c fix from Wolfram Sang:
- Fix potential deadlock during runtime suspend and resume (stm32f7)
* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
The SBDF of the target CXL 2.0 compliant root port is required to inject a CXL
protocol error as per ACPI 6.5. The SBDF given has to be in the
following format:
31 24 23 16 15 11 10 8 7 0
+-------------------------------------------------+
| segment | bus | device | function | reserved |
+-------------------------------------------------+
The SBDF calculated in cxl_dport_get_sbdf() doesn't account for
the reserved bits currently, causing the wrong SBDF to be used.
Fix said calculation to properly shift the SBDF.
Without this fix, error injection into CXL 2.0 root ports through the
CXL debugfs interface (<debugfs>/cxl) is broken. Injection
through the legacy interface (<debugfs>/apei/einj/) will still work
because the SBDF is manually provided by the user.
Fixes: 12fb28ea6b1cf ("EINJ: Add CXL error type support")
Signed-off-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Reviewed-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Link: https://patch.msgid.link/20240927163428.366557-1-Benjamin.Cheatham@amd.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch moves the call to this function so that an handle
can be used. If a transaction fails to start, then there's not point in
trying to mark the filesystem as ineligible, and an error will eventually be
returned to user-space.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240923104909.18342-3-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
We want to check for this early so it can be reattached if necessary in
check_unreachable_inodes(); better than letting it be deleted and having
the children reattached, losing their filenames.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Selecting CONFIG_OMAP2PLUS_MBOX while compile testing
causes a build failure:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
Using 'select' to force-enable another subsystem is generally
a mistake and causes problems such as this one, so change the
three drivers that link against this driver to use 'depends on'
instead, and ensure the driver itself can be compile tested
regardless of the platform.
When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there
is a chance for a link failure, so add a careful dependency
on that.
arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The warning
Documentation/virt/kvm/locking.rst:31: ERROR: Unexpected indentation.
is caused by incorrectly treating a line as the continuation of a paragraph,
rather than as the first line in a bullet list.
Fixed: 44d174596260 ("KVM: Use dedicated mutex to protect kvm_usage_count to avoid deadlock")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c-host fixes for v6.12-rc2
In the stm32f7 a potential deadlock is fixed during runtime
suspend and resume.
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch fixes the calls to this function in
__track_dentry_update() by adding an extra parameter to the callback used in
ext4_fc_track_template().
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240923104909.18342-2-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
link count works differently in bcachefs - it's only nonzero for files
with multiple hardlinks, which means we can also avoid checking it
except for files that are known to have hardlinks.
That means we need a few different checks instead; in particular, we
don't want fsck to delet a file that has a dirent pointing to it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
I2C host fixes for v6.12-rc1
The DesignWare driver now has the correct ENABLE-ABORT sequence,
ensuring ABORT can always be sent when needed.
In the SynQuacer controller we now check for PCLK as an optional
clock, allowing ACPI to directly provide the clock rate.
The recent KEBA driver required a dependency fix in Kconfig.
The XIIC driver now has a corrected power suspend sequence.
Document the Inter-Processor Communication Controller on the Qualcomm
QCS8300 Platform, which will be used to route interrupts across various
subsystems found on the SoC.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
KVM VMX changes for 6.12:
- Set FINAL/PAGE in the page fault error code for EPT Violations if and only
if the GVA is valid. If the GVA is NOT valid, there is no guest-side page
table walk and so stuffing paging related metadata is nonsensical.
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of
emulating posted interrupt delivery to L2.
- Add a lockdep assertion to detect unsafe accesses of vmcs12 structures.
- Harden eVMCS loading against an impossible NULL pointer deref (really truly
should be impossible).
- Minor SGX fix and a cleanup.
Pull hardening fixes from Kees Cook:
- gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
Chancellor)
- MAINTAINERS: Add security/Kconfig.hardening to hardening section
(Nathan Chancellor)
- MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: Add security/Kconfig.hardening to hardening section
hardening: Adjust dependencies in selection of MODVERSIONS
MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
Merge series from Jinjie Ruan <ruanjinjie@huawei.com>:
Fix pm_runtime_set_suspended() with runtime pm enabled, and fix the missing
check for spi-cadence.
Jinjie Ruan (3):
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm
enabled
spi: spi-cadence: Fix missing spi_controller_is_target() check
drivers/spi/spi-cadence.c | 8 +++++---
drivers/spi/spi-imx.c | 2 +-
2 files changed, 6 insertions(+), 4 deletions(-)
--
2.34.1
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex.
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: 4e7bca6fc07b ("i2c: i2c-stm32f7: add PM Runtime support")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
It's legal for regular files to have missing backpointers (due to
hardlinks), and fsck should automatically add them, but for directories
this is an error that should be flagged.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
scatterlist allocations can be chained, and thus all iterations need to
use the chain-aware iterators. Switch the newly added tracing to use the
proper iterators so that they work with chained scatterlists.
Fixes: 038eb433dc14 ("dma-mapping: add tracing for dma-mapping API calls")
Reported-by: syzbot+95e4ef83a3024384ec7a@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Tested-by: syzbot+95e4ef83a3024384ec7a@syzkaller.appspotmail.com
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: 36ecbcab84d0 ("i2c: xiic: Implement power management")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add a compatible for the ipcc on SA8255p platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
KVM SVM changes for 6.12:
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is enabled,
i.e. when the CPU has already flushed the RSB.
- Trace the per-CPU host save area as a VMCB pointer to improve readability
and cleanup the retrieval of the SEV-ES host save area.
- Remove unnecessary accounting of temporary nested VMCB related allocations.
Set PFERR_GUEST_{FINAL,PAGE}_MASK based on EPT_VIOLATION_GVA_TRANSLATED if
and only if EPT_VIOLATION_GVA_IS_VALID is also set in exit qualification.
Per the SDM, bit 8 (EPT_VIOLATION_GVA_TRANSLATED) is valid if and only if
bit 7 (EPT_VIOLATION_GVA_IS_VALID) is set, and is '0' if bit 7 is '0'.
Bit 7 (a.k.a. EPT_VIOLATION_GVA_IS_VALID)
Set if the guest linear-address field is valid. The guest linear-address
field is valid for all EPT violations except those resulting from an
attempt to load the guest PDPTEs as part of the execution of the MOV CR
instruction and those due to trace-address pre-translation
Bit 8 (a.k.a. EPT_VIOLATION_GVA_TRANSLATED)
If bit 7 is 1:
• Set if the access causing the EPT violation is to a guest-physical
address that is the translation of a linear address.
• Clear if the access causing the EPT violation is to a paging-structure
entry as part of a page walk or the update of an accessed or dirty bit.
Reserved if bit 7 is 0 (cleared to 0).
Failure to guard the logic on GVA_IS_VALID results in KVM marking the page
fault as PFERR_GUEST_PAGE_MASK when there is no known GVA, which can put
the vCPU into an infinite loop due to kvm_mmu_page_fault() getting false
positive on its PFERR_NESTED_GUEST_PAGE logic (though only because that
logic is also buggy/flawed).
In practice, this is largely a non-issue because so GVA_IS_VALID is almost
always set. However, when TDX comes along, GVA_IS_VALID will *never* be
set, as the TDX Module deliberately clears bits 12:7 in exit qualification,
e.g. so that the faulting virtual address and other metadata that aren't
practically useful for the hypervisor aren't leaked to the untrusted host.
When exit is due to EPT violation, bits 12-7 of the exit qualification
are cleared to 0.
Fixes: eebed2438923 ("kvm: nVMX: Add support for fast unprotection of nested guest page tables")
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull lsm revert from Paul Moore:
"Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
discussing this week. With near unanimous agreement that the original
TOMOYO patches were not the right way to solve the distro problem
Tetsuo is trying the solve, reverting is our best option at this time"
* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support
When running get_maintainer.pl on security/Kconfig.hardening, only the
security subsystem folks show up, even though they have never taken
patches to this file:
$ scripts/get_maintainer.pl security/Kconfig.hardening
Paul Moore <...> (supporter:SECURITY SUBSYSTEM)
James Morris <...> (supporter:SECURITY SUBSYSTEM)
"Serge E. Hallyn" <...> (supporter:SECURITY SUBSYSTEM)
linux-security-module@vger.kernel.org (open list:SECURITY SUBSYSTEM)
linux-kernel@vger.kernel.org (open list)
$ git log --format=%cn --no-merges security/Kconfig.hardening | sort | uniq -c
3 Andrew Morton
1 Greg Kroah-Hartman
18 Kees Cook
2 Linus Torvald
Add it to the hardening section so that the KSPP folks are also shown,
which matches reality over who should comment on and take said patches
if necessary.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240928-maintainers-security-kconfig-hardening-v1-1-c8c64071cc02@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In the s3c64xx_flush_fifo() code, the loops counter is post-decremented
in the do { } while(test && loops--) condition. This means the loops is
left at the unsigned equivalent of -1 if the loop times out. The test
after will never pass as if tests for loops == 0.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver")
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20240924134009.116247-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
The spi_controller_is_target() check is missing for pm_runtime_disable()
in cdns_spi_remove(), add it.
Fixes: b1b90514eaa3 ("spi: spi-cadence: Add support for Slave mode")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-4-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fragmentation_lru field hasn't been needed since we reworked the LRU
btrees to use the btree write buffer; previously it was used to resolve
collisions, but the revised LRU btree uses the backpointer (the bucket)
as part of the key.
It should have been deleted at the time of the LRU rework; since it
wasn't, that left places for bugs to hide, in check/repair.
This fixes LRU fsck on a filesystem image helpfully provided by a user
who disappeared before I could get his name for the reported-by.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.5
This patch set contains bug fixes related to HBA state clean ups, FCP
discovery on older adapters, kref imbalances, log message improvements,
and support for a new diagnostic loopback testing mode.
The patches were cut against Martin's 6.12/scsi-queue tree.
Link: https://lore.kernel.org/r/20240912232447.45607-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While using the IOMMU DMA path, the dma_addressing_limited() function
checks ops struct which doesn't exist in the IOMMU case. This causes
to the kernel panic while loading ADMGPU driver.
BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 611 Comm: (udev-worker) Tainted: G T 6.11.0-clang-07154-g726e2d0cf2bb #257
Tainted: [T]=RANDSTRUCT
Hardware name: ASUS System Product Name/ROG STRIX Z690-G GAMING WIFI, BIOS 3701 07/03/2024
RIP: 0010:dma_addressing_limited+0x53/0xa0
Code: 8b 93 48 02 00 00 48 39 d1 49 89 d6 4c 0f 42 f1 48 85 d2 4c 0f 44 f1 f6 83 fc 02 00 00 40 75 0a 48 89 df e8 1f 09 00 00 eb 24 <4c> 8b 1c 25 a0 00 00 00 4d 85 db 74 17 48 89 df 41 ba 8b 84 2d 55
RSP: 0018:ffffa8d2c12cf740 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ffff8948820220c8 RCX: 000000ffffffffff
RDX: 0000000000000000 RSI: ffffffffc124dc6d RDI: ffff8948820220c8
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff894883c3f040
R13: ffff89488dac8828 R14: 000000ffffffffff R15: ffff8948820220c8
FS: 00007fe6ba881900(0000) GS:ffff894fdf700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 0000000111984000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x65/0xc0
? page_fault_oops+0x3b9/0x450
? _prb_read_valid+0x212/0x390
? do_user_addr_fault+0x608/0x680
? exc_page_fault+0x4e/0xa0
? asm_exc_page_fault+0x26/0x30
? dma_addressing_limited+0x53/0xa0
amdgpu_ttm_init+0x56/0x4b0 [amdgpu]
gmc_v8_0_sw_init+0x561/0x670 [amdgpu]
amdgpu_device_ip_init+0xf5/0x570 [amdgpu]
amdgpu_device_init+0x1a57/0x1ea0 [amdgpu]
? _raw_spin_unlock_irqrestore+0x1a/0x40
? pci_conf1_read+0xc0/0xe0
? pci_bus_read_config_word+0x52/0xa0
amdgpu_driver_load_kms+0x15/0xa0 [amdgpu]
amdgpu_pci_probe+0x1b7/0x4c0 [amdgpu]
pci_device_probe+0x1c5/0x260
really_probe+0x130/0x470
__driver_probe_device+0x77/0x150
driver_probe_device+0x19/0x120
__driver_attach+0xb1/0x1e0
? __cfi___driver_attach+0x10/0x10
bus_for_each_dev+0x115/0x170
bus_add_driver+0x192/0x2d0
driver_register+0x5c/0xf0
? __cfi_init_module+0x10/0x10 [amdgpu]
do_one_initcall+0x128/0x380
? idr_alloc_cyclic+0x139/0x1d0
? security_kernfs_init_security+0x42/0x140
? __kernfs_new_node+0x1be/0x250
? sysvec_apic_timer_interrupt+0xb6/0xc0
? asm_sysvec_apic_timer_interrupt+0x1a/0x20
? _raw_spin_unlock+0x11/0x30
? free_unref_page+0x283/0x650
? kfree+0x274/0x3a0
? kfree+0x274/0x3a0
? kfree+0x274/0x3a0
? load_module+0xf2e/0x1130
? __kmalloc_cache_noprof+0x12a/0x2e0
do_init_module+0x7d/0x240
__se_sys_init_module+0x19e/0x220
do_syscall_64+0x8a/0x150
? __irq_exit_rcu+0x5e/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe6bb5980ee
Code: 48 8b 0d 3d ed 12 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0a ed 12 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd462219d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000af
RAX: ffffffffffffffda RBX: 0000556caf0d0670 RCX: 00007fe6bb5980ee
RDX: 0000556caf0d3080 RSI: 0000000002893458 RDI: 00007fe6b3400010
RBP: 0000000000020000 R08: 0000000000020010 R09: 0000000000000080
R10: c26073c166186e00 R11: 0000000000000206 R12: 0000556caf0d3430
R13: 0000556caf0d0670 R14: 0000556caf0d3080 R15: 0000556caf0ce700
</TASK>
Modules linked in: amdgpu(+) i915(+) drm_suballoc_helper intel_gtt drm_exec drm_buddy iTCO_wdt i2c_algo_bit intel_pmc_bxt drm_display_helper iTCO_vendor_support gpu_sched drm_ttm_helper cec ttm amdxcp video backlight pinctrl_alderlake nct6775 hwmon_vid nct6775_core coretemp
CR2: 00000000000000a0
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_addressing_limited+0x53/0xa0
Code: 8b 93 48 02 00 00 48 39 d1 49 89 d6 4c 0f 42 f1 48 85 d2 4c 0f 44 f1 f6 83 fc 02 00 00 40 75 0a 48 89 df e8 1f 09 00 00 eb 24 <4c> 8b 1c 25 a0 00 00 00 4d 85 db 74 17 48 89 df 41 ba 8b 84 2d 55
RSP: 0018:ffffa8d2c12cf740 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ffff8948820220c8 RCX: 000000ffffffffff
RDX: 0000000000000000 RSI: ffffffffc124dc6d RDI: ffff8948820220c8
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff894883c3f040
R13: ffff89488dac8828 R14: 000000ffffffffff R15: ffff8948820220c8
FS: 00007fe6ba881900(0000) GS:ffff894fdf700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 0000000111984000 CR4: 0000000000f50ef0
PKRU: 55555554
Fixes: b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219292
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Pull asm-generic updates from Arnd Bergmann:
"These are only two small patches, one cleanup for arch/alpha and a
preparation patch cleaning up the handling of runtime constants in the
linker scripts"
* tag 'asm-generic-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
runtime constants: move list of constants to vmlinux.lds.h
alpha: no need to include asm/xchg.h twice
Enabling dtc interrupt_provider check reveals the examples are missing
the "#interrupt-cells" property as it is a dependency of
"interrupt-controller".
Some of the indentation is off, so fix that too.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
For gettimeofday, -ffixed-r30 was passed to work around a bug in Go
code, where the vDSO trampoline forgot to save and restore this register
across function calls. But Go requires a different trampoline for every
call, and there's no reason that new Go code needs to be broken and add
more bugs. So remove -ffixed-r30 for getrandom.
Fixes: 8072b39c3a75 ("powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240925175021.1526936-2-Jason@zx2c4.com
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a94222db ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver reports that the kvm_has_feat() helper is not behaviing as
expected for negative feature. On investigation, the main issue
seems to be caused by the following construct:
#define get_idreg_field(kvm, id, fld) \
(id##_##fld##_SIGNED ? \
get_idreg_field_signed(kvm, id, fld) : \
get_idreg_field_unsigned(kvm, id, fld))
where one side of the expression evaluates as something signed,
and the other as something unsigned. In retrospect, this is totally
braindead, as the compiler converts this into an unsigned expression.
When compared to something that is 0, the test is simply elided.
Epic fail. Similar issue exists in the expand_field_sign() macro.
The correct way to handle this is to chose between signed and unsigned
comparisons, so that both sides of the ternary expression are of the
same type (bool).
In order to keep the code readable (sort of), we introduce new
comparison primitives taking an operator as a parameter, and
rewrite the kvm_has_feat*() helpers in terms of these primitives.
Fixes: c62d7a23b947 ("KVM: arm64: Add feature checking helpers")
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Oliver Upton <oliver.upton@linux.dev>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241002204239.2051637-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been a while since James had any significant bandwidth to
review KVM/arm64 patches. But in the meantime, Joey has stepped up
and did a really good job reviewing some terrifying patch series.
Having talked with the interested parties, it appears that James
is unlikely to have time for KVM in the near future, and that Joey
is willing to take more responsibilities.
So let's appoint Joey as an official reviewer, and give James some
breathing space, as well as my personal thanks. I'm sure he will
be back one way or another!
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240927104956.1223658-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull ext4 fixes from Ted Ts'o:
"Fix some ext4 bugs and regressions relating to oneline resize and fast
commits"
* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off by one issue in alloc_flex_gd()
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
ext4: use handle to mark fc as ineligible in __track_dentry_update()
Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition,
referring to CONFIG_XEN_PCIDEV_BACKEND. In Kconfig files, one refers to
config options without the CONFIG prefix, though. So in its current form,
this does not create the reverse dependency as intended, but is an
attribute with no effect.
Refer to the intended config option XEN_PCIDEV_BACKEND in the XEN_PRIVCMD
definition.
Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240930090650.429813-1-lukas.bulwahn@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As was tried in commit 4e103134b862 ("KVM: x86/mmu: Zap only the relevant
pages when removing a memslot"), all shadow pages, i.e. non-leaf SPTEs,
need to be zapped. All of the accounting for a shadow page is tied to the
memslot, i.e. the shadow page holds a reference to the memslot, for all
intents and purposes. Deleting the memslot without removing all relevant
shadow pages, as is done when KVM_X86_QUIRK_SLOT_ZAP_ALL is disabled,
results in NULL pointer derefs when tearing down the VM.
Reintroduce from that commit the code that walks the whole memslot when
there are active shadow MMU pages.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When pKVM saves and restores the host floating point state on a SVE system,
it programs the vector length in ZCR_EL2.LEN to be whatever the maximum VL
for the PE is. But it uses a buffer allocated with kvm_host_sve_max_vl, the
maximum VL shared by all PEs in the system. This means that if we run on a
system where the maximum VLs are not consistent, we will overflow the buffer
on PEs which support larger VLs.
Since the host will not currently attempt to make use of non-shared VLs, fix
this by explicitly setting the EL2 VL to be the maximum shared VL when we
save and restore. This will enforce the limit on host VL usage. Should we
wish to support asymmetric VLs, this code will need to be updated along with
the required changes for the host:
https://lore.kernel.org/r/20240730-kvm-arm64-fix-pkvm-sve-vl-v6-0-cae8a2e0bd66@kernel.org
Fixes: b5b9955617bc ("KVM: arm64: Eagerly restore host fpsimd/sve state in pKVM")
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240912-kvm-arm64-limit-guest-vl-v2-1-dd2c29cb2ac9@kernel.org
[maz: added punctuation to the commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Wesley reported an issue:
==================================================================
EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks
------------[ cut here ]------------
kernel BUG at fs/ext4/resize.c:324!
CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27
RIP: 0010:ext4_resize_fs+0x1212/0x12d0
Call Trace:
__ext4_ioctl+0x4e0/0x1800
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0x99/0xd0
x64_sys_call+0x1206/0x20d0
do_syscall_64+0x72/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
While reviewing the patch, Honza found that when adjusting resize_bg in
alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than
flexbg_size.
The reproduction of the problem requires the following:
o_group = flexbg_size * 2 * n;
o_size = (o_group + 1) * group_size;
n_group: [o_group + flexbg_size, o_group + flexbg_size * 2)
o_size = (n_group + 1) * group_size;
Take n=0,flexbg_size=16 as an example:
last:15
|o---------------|--------------n-|
o_group:0 resize to n_group:30
The corresponding reproducer is:
img=test.img
rm -f $img
truncate -s 600M $img
mkfs.ext4 -F $img -b 1024 -G 16 8M
dev=`losetup -f --show $img`
mkdir -p /tmp/test
mount $dev /tmp/test
resize2fs $dev 248M
Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE()
to prevent the issue from happening again.
[ Note: another reproucer which this commit fixes is:
img=test.img
rm -f $img
truncate -s 25MiB $img
mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img
truncate -s 3GiB $img
dev=`losetup -f --show $img`
mkdir -p /tmp/test
mount $dev /tmp/test
resize2fs $dev 3G
umount $dev
losetup -d $dev
-- TYT ]
Reported-by: Wesley Hershberger <wesley.hershberger@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2081231
Reported-by: Stéphane Graber <stgraber@stgraber.org>
Closes: https://lore.kernel.org/all/20240925143325.518508-1-aleksandr.mikhalitsyn@canonical.com/
Tested-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Tested-by: Eric Sandeen <sandeen@redhat.com>
Fixes: 665d3e0af4d3 ("ext4: reduce unnecessary memory allocation in alloc_flex_gd()")
Cc: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240927133329.1015041-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It was initially believed that it would be better to be explicit about
the snapshot we're updating when writing inodes in fsck; however, it
turns out that passing around the snapshot separately is more error
prone and we're usually updating the inode in the same snapshow we read
it from.
This is different from normal filesystem paths, where we do the update
in the snapshot of the subvolume we're in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
The recent addition of support for testing with the x86 specific quirk
KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the
build of the KVM selftests for all other architectures:
In file included from include/kvm_util.h:8,
from include/memstress.h:13,
from memslot_modification_stress_test.c:21:
memslot_modification_stress_test.c: In function ‘main’:
memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function)
176 | KVM_X86_QUIRK_SLOT_ZAP_ALL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add __x86_64__ guard defines to avoid building the relevant code on other
architectures.
Fixes: 61de4c34b51c ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled")
Fixes: 218f6415004a ("KVM: selftests: Allow slot modification stress test with quirk disabled")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On an error, hyp_vcpu will be accessed while this memory has already
been relinquished to the host and unmapped from the hypervisor. Protect
the CPTR assignment with an early return.
Fixes: b5b9955617bc ("KVM: arm64: Eagerly restore host fpsimd/sve state in pKVM")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20240919110500.2345927-1-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The SBDF of the target CXL 2.0 compliant root port is required to inject a CXL
protocol error as per ACPI 6.5. The SBDF given has to be in the
following format:
31 24 23 16 15 11 10 8 7 0
+-------------------------------------------------+
| segment | bus | device | function | reserved |
+-------------------------------------------------+
The SBDF calculated in cxl_dport_get_sbdf() doesn't account for
the reserved bits currently, causing the wrong SBDF to be used.
Fix said calculation to properly shift the SBDF.
Without this fix, error injection into CXL 2.0 root ports through the
CXL debugfs interface (<debugfs>/cxl) is broken. Injection
through the legacy interface (<debugfs>/apei/einj/) will still work
because the SBDF is manually provided by the user.
Fixes: 12fb28ea6b1cf ("EINJ: Add CXL error type support")
Signed-off-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Reviewed-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Link: https://patch.msgid.link/20240927163428.366557-1-Benjamin.Cheatham@amd.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch moves the call to this function so that an handle
can be used. If a transaction fails to start, then there's not point in
trying to mark the filesystem as ineligible, and an error will eventually be
returned to user-space.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240923104909.18342-3-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Selecting CONFIG_OMAP2PLUS_MBOX while compile testing
causes a build failure:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
Using 'select' to force-enable another subsystem is generally
a mistake and causes problems such as this one, so change the
three drivers that link against this driver to use 'depends on'
instead, and ensure the driver itself can be compile tested
regardless of the platform.
When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there
is a chance for a link failure, so add a careful dependency
on that.
arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The warning
Documentation/virt/kvm/locking.rst:31: ERROR: Unexpected indentation.
is caused by incorrectly treating a line as the continuation of a paragraph,
rather than as the first line in a bullet list.
Fixed: 44d174596260 ("KVM: Use dedicated mutex to protect kvm_usage_count to avoid deadlock")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch fixes the calls to this function in
__track_dentry_update() by adding an extra parameter to the callback used in
ext4_fc_track_template().
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240923104909.18342-2-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
link count works differently in bcachefs - it's only nonzero for files
with multiple hardlinks, which means we can also avoid checking it
except for files that are known to have hardlinks.
That means we need a few different checks instead; in particular, we
don't want fsck to delet a file that has a dirent pointing to it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
I2C host fixes for v6.12-rc1
The DesignWare driver now has the correct ENABLE-ABORT sequence,
ensuring ABORT can always be sent when needed.
In the SynQuacer controller we now check for PCLK as an optional
clock, allowing ACPI to directly provide the clock rate.
The recent KEBA driver required a dependency fix in Kconfig.
The XIIC driver now has a corrected power suspend sequence.
Document the Inter-Processor Communication Controller on the Qualcomm
QCS8300 Platform, which will be used to route interrupts across various
subsystems found on the SoC.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
KVM VMX changes for 6.12:
- Set FINAL/PAGE in the page fault error code for EPT Violations if and only
if the GVA is valid. If the GVA is NOT valid, there is no guest-side page
table walk and so stuffing paging related metadata is nonsensical.
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of
emulating posted interrupt delivery to L2.
- Add a lockdep assertion to detect unsafe accesses of vmcs12 structures.
- Harden eVMCS loading against an impossible NULL pointer deref (really truly
should be impossible).
- Minor SGX fix and a cleanup.
Pull hardening fixes from Kees Cook:
- gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
Chancellor)
- MAINTAINERS: Add security/Kconfig.hardening to hardening section
(Nathan Chancellor)
- MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: Add security/Kconfig.hardening to hardening section
hardening: Adjust dependencies in selection of MODVERSIONS
MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
Merge series from Jinjie Ruan <ruanjinjie@huawei.com>:
Fix pm_runtime_set_suspended() with runtime pm enabled, and fix the missing
check for spi-cadence.
Jinjie Ruan (3):
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm
enabled
spi: spi-cadence: Fix missing spi_controller_is_target() check
drivers/spi/spi-cadence.c | 8 +++++---
drivers/spi/spi-imx.c | 2 +-
2 files changed, 6 insertions(+), 4 deletions(-)
--
2.34.1
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex.
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: 4e7bca6fc07b ("i2c: i2c-stm32f7: add PM Runtime support")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
scatterlist allocations can be chained, and thus all iterations need to
use the chain-aware iterators. Switch the newly added tracing to use the
proper iterators so that they work with chained scatterlists.
Fixes: 038eb433dc14 ("dma-mapping: add tracing for dma-mapping API calls")
Reported-by: syzbot+95e4ef83a3024384ec7a@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Tested-by: syzbot+95e4ef83a3024384ec7a@syzkaller.appspotmail.com
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: 36ecbcab84d0 ("i2c: xiic: Implement power management")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
KVM SVM changes for 6.12:
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is enabled,
i.e. when the CPU has already flushed the RSB.
- Trace the per-CPU host save area as a VMCB pointer to improve readability
and cleanup the retrieval of the SEV-ES host save area.
- Remove unnecessary accounting of temporary nested VMCB related allocations.
Set PFERR_GUEST_{FINAL,PAGE}_MASK based on EPT_VIOLATION_GVA_TRANSLATED if
and only if EPT_VIOLATION_GVA_IS_VALID is also set in exit qualification.
Per the SDM, bit 8 (EPT_VIOLATION_GVA_TRANSLATED) is valid if and only if
bit 7 (EPT_VIOLATION_GVA_IS_VALID) is set, and is '0' if bit 7 is '0'.
Bit 7 (a.k.a. EPT_VIOLATION_GVA_IS_VALID)
Set if the guest linear-address field is valid. The guest linear-address
field is valid for all EPT violations except those resulting from an
attempt to load the guest PDPTEs as part of the execution of the MOV CR
instruction and those due to trace-address pre-translation
Bit 8 (a.k.a. EPT_VIOLATION_GVA_TRANSLATED)
If bit 7 is 1:
• Set if the access causing the EPT violation is to a guest-physical
address that is the translation of a linear address.
• Clear if the access causing the EPT violation is to a paging-structure
entry as part of a page walk or the update of an accessed or dirty bit.
Reserved if bit 7 is 0 (cleared to 0).
Failure to guard the logic on GVA_IS_VALID results in KVM marking the page
fault as PFERR_GUEST_PAGE_MASK when there is no known GVA, which can put
the vCPU into an infinite loop due to kvm_mmu_page_fault() getting false
positive on its PFERR_NESTED_GUEST_PAGE logic (though only because that
logic is also buggy/flawed).
In practice, this is largely a non-issue because so GVA_IS_VALID is almost
always set. However, when TDX comes along, GVA_IS_VALID will *never* be
set, as the TDX Module deliberately clears bits 12:7 in exit qualification,
e.g. so that the faulting virtual address and other metadata that aren't
practically useful for the hypervisor aren't leaked to the untrusted host.
When exit is due to EPT violation, bits 12-7 of the exit qualification
are cleared to 0.
Fixes: eebed2438923 ("kvm: nVMX: Add support for fast unprotection of nested guest page tables")
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull lsm revert from Paul Moore:
"Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
discussing this week. With near unanimous agreement that the original
TOMOYO patches were not the right way to solve the distro problem
Tetsuo is trying the solve, reverting is our best option at this time"
* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support
When running get_maintainer.pl on security/Kconfig.hardening, only the
security subsystem folks show up, even though they have never taken
patches to this file:
$ scripts/get_maintainer.pl security/Kconfig.hardening
Paul Moore <...> (supporter:SECURITY SUBSYSTEM)
James Morris <...> (supporter:SECURITY SUBSYSTEM)
"Serge E. Hallyn" <...> (supporter:SECURITY SUBSYSTEM)
linux-security-module@vger.kernel.org (open list:SECURITY SUBSYSTEM)
linux-kernel@vger.kernel.org (open list)
$ git log --format=%cn --no-merges security/Kconfig.hardening | sort | uniq -c
3 Andrew Morton
1 Greg Kroah-Hartman
18 Kees Cook
2 Linus Torvald
Add it to the hardening section so that the KSPP folks are also shown,
which matches reality over who should comment on and take said patches
if necessary.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240928-maintainers-security-kconfig-hardening-v1-1-c8c64071cc02@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In the s3c64xx_flush_fifo() code, the loops counter is post-decremented
in the do { } while(test && loops--) condition. This means the loops is
left at the unsigned equivalent of -1 if the loop times out. The test
after will never pass as if tests for loops == 0.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver")
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20240924134009.116247-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
The spi_controller_is_target() check is missing for pm_runtime_disable()
in cdns_spi_remove(), add it.
Fixes: b1b90514eaa3 ("spi: spi-cadence: Add support for Slave mode")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-4-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fragmentation_lru field hasn't been needed since we reworked the LRU
btrees to use the btree write buffer; previously it was used to resolve
collisions, but the revised LRU btree uses the backpointer (the bucket)
as part of the key.
It should have been deleted at the time of the LRU rework; since it
wasn't, that left places for bugs to hide, in check/repair.
This fixes LRU fsck on a filesystem image helpfully provided by a user
who disappeared before I could get his name for the reported-by.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.5
This patch set contains bug fixes related to HBA state clean ups, FCP
discovery on older adapters, kref imbalances, log message improvements,
and support for a new diagnostic loopback testing mode.
The patches were cut against Martin's 6.12/scsi-queue tree.
Link: https://lore.kernel.org/r/20240912232447.45607-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While using the IOMMU DMA path, the dma_addressing_limited() function
checks ops struct which doesn't exist in the IOMMU case. This causes
to the kernel panic while loading ADMGPU driver.
BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 611 Comm: (udev-worker) Tainted: G T 6.11.0-clang-07154-g726e2d0cf2bb #257
Tainted: [T]=RANDSTRUCT
Hardware name: ASUS System Product Name/ROG STRIX Z690-G GAMING WIFI, BIOS 3701 07/03/2024
RIP: 0010:dma_addressing_limited+0x53/0xa0
Code: 8b 93 48 02 00 00 48 39 d1 49 89 d6 4c 0f 42 f1 48 85 d2 4c 0f 44 f1 f6 83 fc 02 00 00 40 75 0a 48 89 df e8 1f 09 00 00 eb 24 <4c> 8b 1c 25 a0 00 00 00 4d 85 db 74 17 48 89 df 41 ba 8b 84 2d 55
RSP: 0018:ffffa8d2c12cf740 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ffff8948820220c8 RCX: 000000ffffffffff
RDX: 0000000000000000 RSI: ffffffffc124dc6d RDI: ffff8948820220c8
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff894883c3f040
R13: ffff89488dac8828 R14: 000000ffffffffff R15: ffff8948820220c8
FS: 00007fe6ba881900(0000) GS:ffff894fdf700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 0000000111984000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x65/0xc0
? page_fault_oops+0x3b9/0x450
? _prb_read_valid+0x212/0x390
? do_user_addr_fault+0x608/0x680
? exc_page_fault+0x4e/0xa0
? asm_exc_page_fault+0x26/0x30
? dma_addressing_limited+0x53/0xa0
amdgpu_ttm_init+0x56/0x4b0 [amdgpu]
gmc_v8_0_sw_init+0x561/0x670 [amdgpu]
amdgpu_device_ip_init+0xf5/0x570 [amdgpu]
amdgpu_device_init+0x1a57/0x1ea0 [amdgpu]
? _raw_spin_unlock_irqrestore+0x1a/0x40
? pci_conf1_read+0xc0/0xe0
? pci_bus_read_config_word+0x52/0xa0
amdgpu_driver_load_kms+0x15/0xa0 [amdgpu]
amdgpu_pci_probe+0x1b7/0x4c0 [amdgpu]
pci_device_probe+0x1c5/0x260
really_probe+0x130/0x470
__driver_probe_device+0x77/0x150
driver_probe_device+0x19/0x120
__driver_attach+0xb1/0x1e0
? __cfi___driver_attach+0x10/0x10
bus_for_each_dev+0x115/0x170
bus_add_driver+0x192/0x2d0
driver_register+0x5c/0xf0
? __cfi_init_module+0x10/0x10 [amdgpu]
do_one_initcall+0x128/0x380
? idr_alloc_cyclic+0x139/0x1d0
? security_kernfs_init_security+0x42/0x140
? __kernfs_new_node+0x1be/0x250
? sysvec_apic_timer_interrupt+0xb6/0xc0
? asm_sysvec_apic_timer_interrupt+0x1a/0x20
? _raw_spin_unlock+0x11/0x30
? free_unref_page+0x283/0x650
? kfree+0x274/0x3a0
? kfree+0x274/0x3a0
? kfree+0x274/0x3a0
? load_module+0xf2e/0x1130
? __kmalloc_cache_noprof+0x12a/0x2e0
do_init_module+0x7d/0x240
__se_sys_init_module+0x19e/0x220
do_syscall_64+0x8a/0x150
? __irq_exit_rcu+0x5e/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe6bb5980ee
Code: 48 8b 0d 3d ed 12 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0a ed 12 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd462219d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000af
RAX: ffffffffffffffda RBX: 0000556caf0d0670 RCX: 00007fe6bb5980ee
RDX: 0000556caf0d3080 RSI: 0000000002893458 RDI: 00007fe6b3400010
RBP: 0000000000020000 R08: 0000000000020010 R09: 0000000000000080
R10: c26073c166186e00 R11: 0000000000000206 R12: 0000556caf0d3430
R13: 0000556caf0d0670 R14: 0000556caf0d3080 R15: 0000556caf0ce700
</TASK>
Modules linked in: amdgpu(+) i915(+) drm_suballoc_helper intel_gtt drm_exec drm_buddy iTCO_wdt i2c_algo_bit intel_pmc_bxt drm_display_helper iTCO_vendor_support gpu_sched drm_ttm_helper cec ttm amdxcp video backlight pinctrl_alderlake nct6775 hwmon_vid nct6775_core coretemp
CR2: 00000000000000a0
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_addressing_limited+0x53/0xa0
Code: 8b 93 48 02 00 00 48 39 d1 49 89 d6 4c 0f 42 f1 48 85 d2 4c 0f 44 f1 f6 83 fc 02 00 00 40 75 0a 48 89 df e8 1f 09 00 00 eb 24 <4c> 8b 1c 25 a0 00 00 00 4d 85 db 74 17 48 89 df 41 ba 8b 84 2d 55
RSP: 0018:ffffa8d2c12cf740 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ffff8948820220c8 RCX: 000000ffffffffff
RDX: 0000000000000000 RSI: ffffffffc124dc6d RDI: ffff8948820220c8
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff894883c3f040
R13: ffff89488dac8828 R14: 000000ffffffffff R15: ffff8948820220c8
FS: 00007fe6ba881900(0000) GS:ffff894fdf700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 0000000111984000 CR4: 0000000000f50ef0
PKRU: 55555554
Fixes: b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219292
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Pull asm-generic updates from Arnd Bergmann:
"These are only two small patches, one cleanup for arch/alpha and a
preparation patch cleaning up the handling of runtime constants in the
linker scripts"
* tag 'asm-generic-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
runtime constants: move list of constants to vmlinux.lds.h
alpha: no need to include asm/xchg.h twice
Enabling dtc interrupt_provider check reveals the examples are missing
the "#interrupt-cells" property as it is a dependency of
"interrupt-controller".
Some of the indentation is off, so fix that too.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>