V4L/DVB (3339): Activate remote control on HVR1100


- Add a missing case which was preventing the operation of the HVR1100
remote.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Let's switch mutex_debug_check_no_locks_freed() to take (addr, len) as
arguments instead, since all its callers were just calculating the 'to'
address for themselves anyway... (and sometimes doing so badly).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

Cleanup vmlinux.lds.S by using STABS_DEBUG macro from vmlinux.lds.h
instead of repeating the sections.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Removing the dependency on the boot image build was good, but it also
meant that the $< expansion by make needed to be done explicitly.

Noted by Stephen Hemminger.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Also, drop __exit marker from ipv6_netfilter_fini() as this
can be invoked from inet6_init() error handling paths.

Based upon a report from Stephen Hemminger.

Signed-off-by: David S. Miller <davem@davemloft.net>

Fix Dino reporting on J2240. This particular machine thought it
had a Cujo. Also add J2240 Dino chip to the hp_hardware_list.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

It needs <linux/etherdevice.h> for compare_ether_addr()

The bpp module parameter has been obsoleted in favour of
a setup string, so remove the MODULE_PARM.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Header included twice.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Fix stifb framebuffer console at 32bpp on a HCRX-24 card
by properly setting DIRECTCOLOR. Also a few nice cleanups
to the code.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Header included twice.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Use the F_EXTEND() macro instead of open coding it with an
#ifdef. Provides a nice cleanup.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Header included twice.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Cleanup asm-parisc/processor.h to use C99 initializers in
INIT_THREAD().

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Header included twice.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

pdc_stable 0.10:
As mentioned on LKML, pdc_stable wasn't checky enough on the return
values of some calls. This patch makes it more robust to errors when
registering objects in sysfs.

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Headers included twice.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Change to asm-parisc/pci.h makes the define of PCI_HOST_ADDR symmetrical
with PCI_BUS_ADDR. Also add a comment about PA_VIEW and LMMIO/ELMMIO/GMMIO.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Two little cpuset documentation fixes.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

PARPORT_GSC requires selecting PARPORT_NOT_PC in order to
work properly.

Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

drivers/net/gianfar_sysfs.c still contained the old email address
of Kumar Gala.

Signed-off-by: Adrian Bunk <bunk@stusta.de>

OSS Harmony got missed on the conversion of parisc_device.hpa to a
struct resource... fix its build.

Signed-off-by: Stuart Brady <sdb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

This is a small patch that adds loglevel to a printk in
fs/afs/cmservice.c

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

max_low_pfn was not being set in arch/parisc/mm/init.c, causing severe
problems whenever anything tried to use BLK_BOUNCE_HIGH. Set it to
max_pfn like other similar architectures do.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Patch adds a mising printk loglevel (I think KERN_WARNING is appropriate
here) in fs/binfmt_elf.c, and while I was there I made some tiny tiny tiny
adjustments to whitespacing in the neighborhood.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Deal with overlapping LBA MMIO resources,

rp3440 PDC BUG: PDC reports lmmio range for the last rope that overlaps
with the CPU HPA. Console output was:

...
Found devices:
1. Storm Peak Fast at 0xfffffffffe798000 [152] { 0, 0x0, 0x889, 0x00004 }
2. Storm Peak Fast at 0xfffffffffe799000 [153] { 0, 0x0, 0x889, 0x00004 }
...
FAILED: lba_fixup_bus() request for lmmio_space
[fffffffff0000000/fffffffffecffffe]

Output is now:

LBA: Truncating lmmio_space [fffffffff0000000/fffffffffecffffe] to
[fffffffff0000000,fffffffffe797fff]

My only concern with this patch is how C8000 (PAT PDC) will report
elmmio ranges when a gfx card is installed. I'll have to test this
another day.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

in mm/swapfile.c a printk() is missing a loglevel. I believe the proper
loglevel for this situation is KERN_ERR, so that's what the patch below
sets -if you agree, please apply.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Add __iomem to __raw_check_addr(), which nukes ~13809 sparse
warnings on allmodconfig.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Here's a tiny patch making a few esthetic changes to
Documentation/laptop-mode.txt
To me this patch makes sense, but feel free to disagree, I don't feel
strongly about it at all.

It changes a single URL to its strictly correct form (directories should
end in /), and it makes the arguments to main in an included example
program follow convention and be named argc and argv.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Define some constants for HugeTLB pages, not that parisc-linux supports
it yet.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Signed-off-by: Adrian Bunk <bunk@stusta.de>

Fix dino by using DINO_LOCAL_IRQS as the limit for gsc_find_local_irq()
instead of the irq itself.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

This memset() line was indented with seven spaces, this patch fixes
it to use a tab instead. Yes, very trivial but it's the third time
I have to look at this line..

Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Make knapps work with its 64MB gfx card. I probably just broke another
machine in the process, but assuming 64MB when 64MB aligned is probably
safer than assuming 32MB all the time.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixup ioremap a bit. It seems to work on 32-bit kernels, but fails
miserably on the first ioremapped access on 64-bit kernels. Also, having
STI enabled causes it to fail. Probably because we're passing an ioremapped
region to a real-mode STI call...

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Annotate eisa_eeprom_read() with __user.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Mark mutex_lock() and mutex_lock_interruptible() as might_sleep()
functions.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix irq-off-by-one for Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop.
We just DECLARE_PCI_FIXUP_ENABLE as it is unlikely that this will be
found in any other parisc system.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Call the mutex slowpath more conservatively - e.g. FRAME_POINTERS can
change the calling convention, in which case a direct branch to the
slowpath becomes illegal. Bug found by Hugh Dickins.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Jean-Luc Leger <reiga@dspnet.fr.eu.org> reported this alternative
dependency on a non-existing symbol.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make flush_data_cache_local, flush_instruction_cache_local and
flush_tlb_all_local take a void * so they don't have to be cast
when using on_each_cpu(). This becomes a problem when on_each_cpu
is a macro (as it is in current -mm).

Also move the prototype of flush_tlb_all_local into tlbflush.h and
remove its declaration from .c files.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Remove unnecessary (and incorrect) inclusion of asm/mutex.h, pointed out
by David Howells.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

EXPORT_SYMBOL's do nowadays belong to the files where the actual
functions are.

Moving the module_init/module_exit to the file with the actual functions
has the advantage of saving a few bytes due to the removal of two
functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flag a whole bunch of things as __read_mostly on parisc. Also flag a few
branches as unlikely() and cleanup a bit of code.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

This requires the proper capabilities for the moxa bios update ioctl's.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Small cleanups for drivers/atm/zatm.c
Get rid of unneeded cast of kmalloc() return value.
Small whitespace/CodingStyle/formatting cleanup (since I was in there anyway).

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a5 register corruption when processing user space signals handlers.
We need to save a5 through each contenxt change.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Get rid of needless casting of kmalloc() return value in net/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We're starting a number of big applications (memory footprint app.
1MByte) on our Arcturus uC5272. Therefore memory fragmentation is a
real pain for us. We've switched to uClinux-2.4.27-uc1 and found that
page_alloc2 fragments the memory heavily.

Digging into it we found a bug in the find_next_zero_bit function in the
m68knommu/bitops.h file. if the size isn't a multiple of 32 than the
upper bits of the last word to be searched should be masked. But the
functions masks the lower bits of the last word because it uses a right
shift instead of a left shift operator.

Patch submitted by Sascha Smejkal <s.smejkal@centersystems.at>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Decrease the number of pointer derefs in net/rxrpc/connection.c

Benefits of the patch:
- Fewer pointer dereferences should make the code slightly faster.
- Size of generated code is smaller
- improved readability

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify the initial trace output (which is based on flags in the binary
header) so that it is not done until after the magic number check. This
may well not be a flat format binary, so the flags could be invalid.
(Prime example, running a script).

Changes prompted by patches from Stuart Hughs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Martin Murray <murrayma@citi.umich.edu>

Sanity check nlmsg_len during netlink_rcv_skb. An nlmsg_len == 0 can
cause infinite loop in kernel, effectively DoSing machine. Noted by
Matin Murray.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the hardware interrupt priority to a different value for each
attached ColdFire serial port. According to the CPU documentation you
should not use the same combination of level/priority on more than one
device. People have reported odd serial port behavior with them set the
same.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>