From f08afff0ddd74e2edb11d4be9cdc7b4919d68ee8 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Wed, 16 Sep 2026 09:08:13 +0300 Subject: [PATCH] dt-bindings: regulator: ROHM BD73800 regulators Add bindings for the BUCKs and LDOs on ROHM BD73800. The PMIC state specific voltages can be set in same fashion as with a few other ROHM PMICs (for example with BD718[15,28,37,47,50,79]). Same properties are recycled :) The LDOs 1 and 4 can use different voltage ranges depending on the OTP configuration. Signed-off-by: Matti Vaittinen Reviewed-by: Rob Herring (Arm) Link: https://patch.msgid.link/0f001ca0d7463cd66777d8ad723212fadb199ce1.1789538455.git.mazziesaccount@gmail.com Signed-off-by: Lee Jones --- .../regulator/rohm,bd73800-regulator.yaml | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml new file mode 100644 index 000000000000..2db4585272c5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd73800-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD73800 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + This module is part of the ROHM BD73800 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd73800-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + Regulator nodes should be named to buck and ldo. + The valid names for BD73800 regulator nodes are + buck1, buck2, buck3, buck4, buck5, buck6, buck7, buck8 + ldo1, ldo2, ldo3, ldo4 + +patternProperties: + "^buck[1-8]$": + type: object + description: + Properties for a single BUCK regulator. + allOf: + - $ref: regulator.yaml# + - $ref: rohm,pmic-states.yaml# + + properties: + regulator-name: + pattern: "^buck[1-8]$" + description: + should be "buck1", ..., "buck8" + + rohm,dvs-run-voltage: + minimum: 0 + maximum: 3500000 + + rohm,dvs-idle-voltage: + minimum: 0 + maximum: 3500000 + + rohm,dvs-suspend-voltage: + minimum: 0 + maximum: 3500000 + + # BUCKs 1,2,3,4 and 8 support voltages 0.5 - 1.3V + # BUCK 5 supports voltages 0.3 - 1.3V + # BUCKs 6 and 7 support voltages 1.5 - 3.5V + + required: + - regulator-name + + unevaluatedProperties: false + + "^ldo[1-4]$": + type: object + description: + Properties for single LDO regulator. + allOf: + - $ref: regulator.yaml# + - $ref: rohm,pmic-states.yaml# + + properties: + regulator-name: + pattern: "^ldo[1-4]$" + description: + should be "ldo1", ..., "ldo4" + + rohm,dvs-run-voltage: + minimum: 0 + maximum: 1 + + rohm,dvs-idle-voltage: + minimum: 0 + maximum: 1 + + rohm,dvs-suspend-voltage: + minimum: 0 + maximum: 1 + + rohm,ldo-range-high: + type: boolean + description: + LDO1 and LDO3 voltage ranges can be "high" or "low" depending on + OTP. Indicate that the "high" range is used. See comment below + for voltages. + + # LDOs 2 and 4 support voltages 0.75 - 3.3V + # LDOs 1 and 3 may support different ranges depending on OTP. + # either 0.6 - 1.8V or 0.75 - 3.3V. + + unevaluatedProperties: false + +additionalProperties: false -- knotmirror 0.0.1