Merge tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver bugfixes from Greg KH:
"Here are some tiny staging driver bugfixes that I've had in my tree
for the past week that resolve some reported issues. Nothing major at
all, but it would be good to get them merged for 3.16-rc8 or -final"

* tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt6655: Fix disassociated messages every 10 seconds
staging: vt6655: Fix Warning on boot handle_irq_event_percpu.
staging: rtl8723au: rtw_resume(): release semaphore before exit on error
iio:bma180: Missing check for frequency fractional part
iio:bma180: Fix scale factors to report correct acceleration units
iio: buffer: Fix demux table creation

drivers/iio/accel/bma180.c

···
 /* Defaults values */
 #define BMA180_DEF_PMODE	0
 #define BMA180_DEF_BW		20
-#define BMA180_DEF_SCALE	250
+#define BMA180_DEF_SCALE	2452
 
 /* Available values for sysfs */
 #define BMA180_FLP_FREQ_AVAILABLE \
 	"10 20 40 75 150 300"
 #define BMA180_SCALE_AVAILABLE \
-	"0.000130 0.000190 0.000250 0.000380 0.000500 0.000990 0.001980"
+	"0.001275 0.001863 0.002452 0.003727 0.004903 0.009709 0.019417"
 
 struct bma180_data {
 	struct i2c_client *client;
···
 };
 
 static int bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */
-static int scale_table[] = { 130, 190, 250, 380, 500, 990, 1980 };
+static int scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 };
 
 static int bma180_get_acc_reg(struct bma180_data *data, enum bma180_axis axis)
 {
···
 		mutex_unlock(&data->mutex);
 		return ret;
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		if (val2)
+			return -EINVAL;
 		mutex_lock(&data->mutex);
 		ret = bma180_set_bw(data, val);
 		mutex_unlock(&data->mutex);

drivers/iio/industrialio-buffer.c

···
 
 	/* Now we have the two masks, work from least sig and build up sizes */
 	for_each_set_bit(out_ind,
-			 indio_dev->active_scan_mask,
+			 buffer->scan_mask,
 			 indio_dev->masklength) {
 		in_ind = find_next_bit(indio_dev->active_scan_mask,
 				       indio_dev->masklength,

drivers/staging/rtl8723au/os_dep/usb_intf.c

···
 	pwrpriv->bkeepfwalive = false;
 
 	DBG_8723A("bkeepfwalive(%x)\n", pwrpriv->bkeepfwalive);
-	if (pm_netdev_open23a(pnetdev, true) != 0)
+	if (pm_netdev_open23a(pnetdev, true) != 0) {
+		up(&pwrpriv->lock);
 		goto exit;
+	}
 
 	netif_device_attach(pnetdev);
 	netif_carrier_on(pnetdev);

drivers/staging/vt6655/bssdb.c

···
 		pDevice->byERPFlag &= ~(WLAN_SET_ERP_USE_PROTECTION(1));
 	}
 
-	{
+	if (pDevice->eCommandState == WLAN_ASSOCIATE_WAIT) {
 		pDevice->byReAssocCount++;
 		/* 10 sec timeout */
 		if ((pDevice->byReAssocCount > 10) && (!pDevice->bLinkPass)) {

drivers/staging/vt6655/device_main.c

···
 	int             handled = 0;
 	unsigned char byData = 0;
 	int             ii = 0;
+	unsigned long flags;
 
 	MACvReadISR(pDevice->PortOffset, &pDevice->dwIsr);
 
···
 
 	handled = 1;
 	MACvIntDisable(pDevice->PortOffset);
-	spin_lock_irq(&pDevice->lock);
+
+	spin_lock_irqsave(&pDevice->lock, flags);
 
 	//Make sure current page is 0
 	VNSvInPortB(pDevice->PortOffset + MAC_REG_PAGE1SEL, &byOrgPageSel);
···
 	if (byOrgPageSel == 1)
 		MACvSelectPage1(pDevice->PortOffset);
 
-	spin_unlock_irq(&pDevice->lock);
+	spin_unlock_irqrestore(&pDevice->lock, flags);
+
 	MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
 
 	return IRQ_RETVAL(handled);