From ab1a02163fcdb2dbe5da603f97aceebe0c582708 Mon Sep 17 00:00:00 2001 From: Karl Asseily Date: Fri, 18 Sep 2026 21:23:15 +0300 Subject: [PATCH] ASoC: dt-bindings: add ESS Technology ES9039Q2M Add a binding for the ES9039Q2M, a 32-bit two-channel audio DAC with an asynchronous sample rate converter. The part selects between two control personalities with its MODE pin: hardware mode, strapped by HW0/HW1/HW2 with no control bus at all, and software mode over I2C or SPI. This binding describes software mode over I2C, which MODE = GND selects. The four supply inputs are described and required. DVDD is not among them: the part's 1.2V digital rail is generated on chip and the pin takes only a decoupling capacitor. The datasheet asks for the supplies in a set order - AVDD, then VCCA about 200us later, then the two output-stage references, and the reverse on the way down - which the description records, so a board with separately switchable rails has it to hand. Assisted-by: Claude:claude-opus-5 Signed-off-by: Karl Asseily Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260918182317.143223-3-karl@asseily.com Signed-off-by: Mark Brown --- .../bindings/sound/esstech,es9039q2m.yaml | 94 +++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/esstech,es9039q2m.yaml diff --git a/Documentation/devicetree/bindings/sound/esstech,es9039q2m.yaml b/Documentation/devicetree/bindings/sound/esstech,es9039q2m.yaml new file mode 100644 index 000000000000..15db30af4b6c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/esstech,es9039q2m.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/esstech,es9039q2m.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ESS Technology ES9039Q2M audio DAC + +maintainers: + - Karl Asseily + +description: + The ES9039Q2M is a 32-bit two-channel audio DAC supporting PCM to 768 kHz, + DSD64 to DSD1024, DoP and S/PDIF. It is controlled over I2C or SPI when the + MODE pin selects software mode; this binding covers the I2C interface. The + part contains an asynchronous sample rate converter, so the system clock need + not be synchronous with the audio bit or frame clocks. + + The four supplies are all nominally 3.3V and the datasheet requires a set + order - AVDD first, then VCCA about 200us later, then AVCC_DAC1 and + AVCC_DAC2, and the reverse on the way down. DVDD, the part's 1.2V rail, is + on-chip and needs only its decoupling capacitor - it is not a supply input + and has no property here. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: esstech,es9039q2m + + reg: + description: + I2C address, selected by the ADDR0 and ADDR1 pins - 0x48, 0x49, 0x4a or + 0x4b for GND/GND, GND/AVDD, AVDD/GND and AVDD/AVDD respectively. + enum: [ 0x48, 0x49, 0x4a, 0x4b ] + + clocks: + maxItems: 1 + + clock-names: + const: mclk + + avdd-supply: + description: + 3.3V supply for the part's internal digital regulator, pin AVDD. It is + the first rail up and the last down, per the ordering described above. + + vcca-supply: + description: 3.3V analogue supply, pin VCCA. + + avcc-dac1-supply: + description: + 3.3V reference supply for the channel 1 analogue output stage, pin + AVCC_DAC1. The datasheet allows this rail to move by up to 15% where a + calibrating regulator tracks the DAC's output impedance. + + avcc-dac2-supply: + description: + 3.3V reference supply for the channel 2 analogue output stage, pin + AVCC_DAC2, with the same 15% allowance as channel 1. + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - avdd-supply + - vcca-supply + - avcc-dac1-supply + - avcc-dac2-supply + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@48 { + compatible = "esstech,es9039q2m"; + reg = <0x48>; + #sound-dai-cells = <0>; + clocks = <&dac_mclk>; + clock-names = "mclk"; + avdd-supply = <&dac_3v3>; + vcca-supply = <&dac_3v3>; + avcc-dac1-supply = <&dac_avcc1>; + avcc-dac2-supply = <&dac_avcc2>; + }; + }; -- knotmirror 0.0.1