diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt51021.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt51021.yaml new file mode 100644 index 000000000000..7754a8cb1e5c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt51021.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt51021.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT51021 based DSI display Panels + +maintainers: + - Nickolay Goppen + +description: + The NT51021 IC from Novatek is a generic DSI Panel IC used to drive dsi + panels. + Right now, support is added only for a BOE WUXGA LCD display panels with a + resolution of 1200x1920. They are video mode DSI panels. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - boe,tv101wum-nm0 + - boe,tv101wum-nx0 + - boe,tv080wum-nx2 + - const: novatek,nt51021 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be 8mA, gpio + can be configured using mux, pinctrl, pinctrl-names (active low) + + vdd-supply: + description: phandle of the regulator that provides the supply voltage + for digital circuits + + avdd-supply: + description: phandle of the regulator that provides the supply voltage + for analog circuits + + havdd-supply: + description: phandle of the regulator that provides the supply voltage + for analog circuits + +required: + - compatible + - reg + - vdd-supply + - avdd-supply + - havdd-supply + - reset-gpios + - port + +unevaluatedProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "boe,tv101wum-nx0", "novatek,nt51021"; + reg = <0>; + vdd-supply = <&lcd_pwr>; + avdd-supply = <&lcd_pwr>; + havdd-supply = <&lcd_pwr>; + + backlight = <&i2c_backlight>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + +...