diff --git a/drivers/usb/typec/mux/ps883x.c b/drivers/usb/typec/mux/ps883x.c
index 15aee1d613b1..2ec57cfe748a 100644
--- a/drivers/usb/typec/mux/ps883x.c
+++ b/drivers/usb/typec/mux/ps883x.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/usb/pd.h>
@@ -42,6 +43,22 @@
 #define CONN_STATUS_2_TBT_UNIDIR_LSRX_ACT_LT	BIT(4)
 #define CONN_STATUS_2_USB4_CONNECTED		BIT(7)
 
+/*
+ * Platforms where the USB4 / DP-tunneling stack is not ready yet. Rejecting
+ * USB4 here lets the Type-C stack fall back to USB3 + DP Alt Mode instead of
+ * negotiating USB4 and then failing to drive DisplayPort.
+ *
+ * This is a temporary, kernel-contained quirk (not DT ABI). Drop the entries
+ * once the corresponding USB4 support is complete.
+ */
+static const char * const ps883x_disable_usb4_compats[] = {
+	"qcom,x1e80100",
+	"qcom,x1p42100",
+	"qcom,hamoa",
+	"qcom,purwa",
+	NULL,
+};
+
 struct ps883x_retimer {
 	struct i2c_client *client;
 	struct gpio_desc *reset_gpio;
@@ -63,8 +80,21 @@ struct ps883x_retimer {
 
 	enum typec_orientation orientation;
 	bool in_reset;
+	bool disable_usb4;
 };
 
+static bool ps883x_should_disable_usb4(void)
+{
+	const char * const *compat;
+
+	for (compat = ps883x_disable_usb4_compats; *compat; compat++) {
+		if (of_machine_is_compatible(*compat))
+			return true;
+	}
+
+	return false;
+}
+
 static int ps883x_enable_vregs(struct ps883x_retimer *retimer)
 {
 	struct device *dev = &retimer->client->dev;
@@ -260,6 +290,9 @@ static int ps883x_set(struct ps883x_retimer *retimer, struct typec_retimer_state
 			cfg0 |= CONN_STATUS_0_USB_3_1_CONNECTED;
 			break;
 		case TYPEC_MODE_USB4:
+			if (retimer->disable_usb4)
+				return -EOPNOTSUPP;
+
 			eudo_data = state->data;
 
 			cfg2 |= CONN_STATUS_2_USB4_CONNECTED;
@@ -389,6 +422,10 @@ static int ps883x_retimer_probe(struct i2c_client *client)
 
 	retimer->client = client;
 
+	retimer->disable_usb4 = ps883x_should_disable_usb4();
+	if (retimer->disable_usb4)
+		dev_info(dev, "USB4 disabled until platform USB4 support is complete\n");
+
 	mutex_init(&retimer->lock);
 
 	retimer->regmap = devm_regmap_init_i2c(client, &ps883x_retimer_regmap);