Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */
2/*
3 * Header file for the io_uring interface.
4 *
5 * Copyright (C) 2019 Jens Axboe
6 * Copyright (C) 2019 Christoph Hellwig
7 */
8#ifndef LINUX_IO_URING_H
9#define LINUX_IO_URING_H
10
11#include <linux/fs.h>
12#include <linux/types.h>
13/*
14 * this file is shared with liburing and that has to autodetect
15 * if linux/time_types.h is available or not, it can
16 * define UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H
17 * if linux/time_types.h is not available
18 */
19#ifndef UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H
20#include <linux/time_types.h>
21#endif
22
23#ifdef __cplusplus
24extern "C" {
25#endif
26
27/*
28 * IO submission data structure (Submission Queue Entry)
29 */
30struct io_uring_sqe {
31 __u8 opcode; /* type of operation for this sqe */
32 __u8 flags; /* IOSQE_ flags */
33 __u16 ioprio; /* ioprio for the request */
34 __s32 fd; /* file descriptor to do IO on */
35 union {
36 __u64 off; /* offset into file */
37 __u64 addr2;
38 struct {
39 __u32 cmd_op;
40 __u32 __pad1;
41 };
42 };
43 union {
44 __u64 addr; /* pointer to buffer or iovecs */
45 __u64 splice_off_in;
46 };
47 __u32 len; /* buffer size or number of iovecs */
48 union {
49 __kernel_rwf_t rw_flags;
50 __u32 fsync_flags;
51 __u16 poll_events; /* compatibility */
52 __u32 poll32_events; /* word-reversed for BE */
53 __u32 sync_range_flags;
54 __u32 msg_flags;
55 __u32 timeout_flags;
56 __u32 accept_flags;
57 __u32 cancel_flags;
58 __u32 open_flags;
59 __u32 statx_flags;
60 __u32 fadvise_advice;
61 __u32 splice_flags;
62 __u32 rename_flags;
63 __u32 unlink_flags;
64 __u32 hardlink_flags;
65 __u32 xattr_flags;
66 __u32 msg_ring_flags;
67 __u32 uring_cmd_flags;
68 };
69 __u64 user_data; /* data to be passed back at completion time */
70 /* pack this to avoid bogus arm OABI complaints */
71 union {
72 /* index into fixed buffers, if used */
73 __u16 buf_index;
74 /* for grouped buffer selection */
75 __u16 buf_group;
76 } __attribute__((packed));
77 /* personality to use, if used */
78 __u16 personality;
79 union {
80 __s32 splice_fd_in;
81 __u32 file_index;
82 struct {
83 __u16 addr_len;
84 __u16 __pad3[1];
85 };
86 };
87 union {
88 struct {
89 __u64 addr3;
90 __u64 __pad2[1];
91 };
92 /*
93 * If the ring is initialized with IORING_SETUP_SQE128, then
94 * this field is used for 80 bytes of arbitrary command data
95 */
96 __u8 cmd[0];
97 };
98};
99
100/*
101 * If sqe->file_index is set to this for opcodes that instantiate a new
102 * direct descriptor (like openat/openat2/accept), then io_uring will allocate
103 * an available direct descriptor instead of having the application pass one
104 * in. The picked direct descriptor will be returned in cqe->res, or -ENFILE
105 * if the space is full.
106 */
107#define IORING_FILE_INDEX_ALLOC (~0U)
108
109enum {
110 IOSQE_FIXED_FILE_BIT,
111 IOSQE_IO_DRAIN_BIT,
112 IOSQE_IO_LINK_BIT,
113 IOSQE_IO_HARDLINK_BIT,
114 IOSQE_ASYNC_BIT,
115 IOSQE_BUFFER_SELECT_BIT,
116 IOSQE_CQE_SKIP_SUCCESS_BIT,
117};
118
119/*
120 * sqe->flags
121 */
122/* use fixed fileset */
123#define IOSQE_FIXED_FILE (1U << IOSQE_FIXED_FILE_BIT)
124/* issue after inflight IO */
125#define IOSQE_IO_DRAIN (1U << IOSQE_IO_DRAIN_BIT)
126/* links next sqe */
127#define IOSQE_IO_LINK (1U << IOSQE_IO_LINK_BIT)
128/* like LINK, but stronger */
129#define IOSQE_IO_HARDLINK (1U << IOSQE_IO_HARDLINK_BIT)
130/* always go async */
131#define IOSQE_ASYNC (1U << IOSQE_ASYNC_BIT)
132/* select buffer from sqe->buf_group */
133#define IOSQE_BUFFER_SELECT (1U << IOSQE_BUFFER_SELECT_BIT)
134/* don't post CQE if request succeeded */
135#define IOSQE_CQE_SKIP_SUCCESS (1U << IOSQE_CQE_SKIP_SUCCESS_BIT)
136
137/*
138 * io_uring_setup() flags
139 */
140#define IORING_SETUP_IOPOLL (1U << 0) /* io_context is polled */
141#define IORING_SETUP_SQPOLL (1U << 1) /* SQ poll thread */
142#define IORING_SETUP_SQ_AFF (1U << 2) /* sq_thread_cpu is valid */
143#define IORING_SETUP_CQSIZE (1U << 3) /* app defines CQ size */
144#define IORING_SETUP_CLAMP (1U << 4) /* clamp SQ/CQ ring sizes */
145#define IORING_SETUP_ATTACH_WQ (1U << 5) /* attach to existing wq */
146#define IORING_SETUP_R_DISABLED (1U << 6) /* start with ring disabled */
147#define IORING_SETUP_SUBMIT_ALL (1U << 7) /* continue submit on error */
148/*
149 * Cooperative task running. When requests complete, they often require
150 * forcing the submitter to transition to the kernel to complete. If this
151 * flag is set, work will be done when the task transitions anyway, rather
152 * than force an inter-processor interrupt reschedule. This avoids interrupting
153 * a task running in userspace, and saves an IPI.
154 */
155#define IORING_SETUP_COOP_TASKRUN (1U << 8)
156/*
157 * If COOP_TASKRUN is set, get notified if task work is available for
158 * running and a kernel transition would be needed to run it. This sets
159 * IORING_SQ_TASKRUN in the sq ring flags. Not valid with COOP_TASKRUN.
160 */
161#define IORING_SETUP_TASKRUN_FLAG (1U << 9)
162#define IORING_SETUP_SQE128 (1U << 10) /* SQEs are 128 byte */
163#define IORING_SETUP_CQE32 (1U << 11) /* CQEs are 32 byte */
164/*
165 * Only one task is allowed to submit requests
166 */
167#define IORING_SETUP_SINGLE_ISSUER (1U << 12)
168
169/*
170 * Defer running task work to get events.
171 * Rather than running bits of task work whenever the task transitions
172 * try to do it just before it is needed.
173 */
174#define IORING_SETUP_DEFER_TASKRUN (1U << 13)
175
176/*
177 * Application provides the memory for the rings
178 */
179#define IORING_SETUP_NO_MMAP (1U << 14)
180
181/*
182 * Register the ring fd in itself for use with
183 * IORING_REGISTER_USE_REGISTERED_RING; return a registered fd index rather
184 * than an fd.
185 */
186#define IORING_SETUP_REGISTERED_FD_ONLY (1U << 15)
187
188enum io_uring_op {
189 IORING_OP_NOP,
190 IORING_OP_READV,
191 IORING_OP_WRITEV,
192 IORING_OP_FSYNC,
193 IORING_OP_READ_FIXED,
194 IORING_OP_WRITE_FIXED,
195 IORING_OP_POLL_ADD,
196 IORING_OP_POLL_REMOVE,
197 IORING_OP_SYNC_FILE_RANGE,
198 IORING_OP_SENDMSG,
199 IORING_OP_RECVMSG,
200 IORING_OP_TIMEOUT,
201 IORING_OP_TIMEOUT_REMOVE,
202 IORING_OP_ACCEPT,
203 IORING_OP_ASYNC_CANCEL,
204 IORING_OP_LINK_TIMEOUT,
205 IORING_OP_CONNECT,
206 IORING_OP_FALLOCATE,
207 IORING_OP_OPENAT,
208 IORING_OP_CLOSE,
209 IORING_OP_FILES_UPDATE,
210 IORING_OP_STATX,
211 IORING_OP_READ,
212 IORING_OP_WRITE,
213 IORING_OP_FADVISE,
214 IORING_OP_MADVISE,
215 IORING_OP_SEND,
216 IORING_OP_RECV,
217 IORING_OP_OPENAT2,
218 IORING_OP_EPOLL_CTL,
219 IORING_OP_SPLICE,
220 IORING_OP_PROVIDE_BUFFERS,
221 IORING_OP_REMOVE_BUFFERS,
222 IORING_OP_TEE,
223 IORING_OP_SHUTDOWN,
224 IORING_OP_RENAMEAT,
225 IORING_OP_UNLINKAT,
226 IORING_OP_MKDIRAT,
227 IORING_OP_SYMLINKAT,
228 IORING_OP_LINKAT,
229 IORING_OP_MSG_RING,
230 IORING_OP_FSETXATTR,
231 IORING_OP_SETXATTR,
232 IORING_OP_FGETXATTR,
233 IORING_OP_GETXATTR,
234 IORING_OP_SOCKET,
235 IORING_OP_URING_CMD,
236 IORING_OP_SEND_ZC,
237 IORING_OP_SENDMSG_ZC,
238
239 /* this goes last, obviously */
240 IORING_OP_LAST,
241};
242
243/*
244 * sqe->uring_cmd_flags
245 * IORING_URING_CMD_FIXED use registered buffer; pass this flag
246 * along with setting sqe->buf_index.
247 * IORING_URING_CMD_POLLED driver use only
248 */
249#define IORING_URING_CMD_FIXED (1U << 0)
250#define IORING_URING_CMD_POLLED (1U << 31)
251
252
253/*
254 * sqe->fsync_flags
255 */
256#define IORING_FSYNC_DATASYNC (1U << 0)
257
258/*
259 * sqe->timeout_flags
260 */
261#define IORING_TIMEOUT_ABS (1U << 0)
262#define IORING_TIMEOUT_UPDATE (1U << 1)
263#define IORING_TIMEOUT_BOOTTIME (1U << 2)
264#define IORING_TIMEOUT_REALTIME (1U << 3)
265#define IORING_LINK_TIMEOUT_UPDATE (1U << 4)
266#define IORING_TIMEOUT_ETIME_SUCCESS (1U << 5)
267#define IORING_TIMEOUT_MULTISHOT (1U << 6)
268#define IORING_TIMEOUT_CLOCK_MASK (IORING_TIMEOUT_BOOTTIME | IORING_TIMEOUT_REALTIME)
269#define IORING_TIMEOUT_UPDATE_MASK (IORING_TIMEOUT_UPDATE | IORING_LINK_TIMEOUT_UPDATE)
270/*
271 * sqe->splice_flags
272 * extends splice(2) flags
273 */
274#define SPLICE_F_FD_IN_FIXED (1U << 31) /* the last bit of __u32 */
275
276/*
277 * POLL_ADD flags. Note that since sqe->poll_events is the flag space, the
278 * command flags for POLL_ADD are stored in sqe->len.
279 *
280 * IORING_POLL_ADD_MULTI Multishot poll. Sets IORING_CQE_F_MORE if
281 * the poll handler will continue to report
282 * CQEs on behalf of the same SQE.
283 *
284 * IORING_POLL_UPDATE Update existing poll request, matching
285 * sqe->addr as the old user_data field.
286 *
287 * IORING_POLL_LEVEL Level triggered poll.
288 */
289#define IORING_POLL_ADD_MULTI (1U << 0)
290#define IORING_POLL_UPDATE_EVENTS (1U << 1)
291#define IORING_POLL_UPDATE_USER_DATA (1U << 2)
292#define IORING_POLL_ADD_LEVEL (1U << 3)
293
294/*
295 * ASYNC_CANCEL flags.
296 *
297 * IORING_ASYNC_CANCEL_ALL Cancel all requests that match the given key
298 * IORING_ASYNC_CANCEL_FD Key off 'fd' for cancelation rather than the
299 * request 'user_data'
300 * IORING_ASYNC_CANCEL_ANY Match any request
301 * IORING_ASYNC_CANCEL_FD_FIXED 'fd' passed in is a fixed descriptor
302 */
303#define IORING_ASYNC_CANCEL_ALL (1U << 0)
304#define IORING_ASYNC_CANCEL_FD (1U << 1)
305#define IORING_ASYNC_CANCEL_ANY (1U << 2)
306#define IORING_ASYNC_CANCEL_FD_FIXED (1U << 3)
307
308/*
309 * send/sendmsg and recv/recvmsg flags (sqe->ioprio)
310 *
311 * IORING_RECVSEND_POLL_FIRST If set, instead of first attempting to send
312 * or receive and arm poll if that yields an
313 * -EAGAIN result, arm poll upfront and skip
314 * the initial transfer attempt.
315 *
316 * IORING_RECV_MULTISHOT Multishot recv. Sets IORING_CQE_F_MORE if
317 * the handler will continue to report
318 * CQEs on behalf of the same SQE.
319 *
320 * IORING_RECVSEND_FIXED_BUF Use registered buffers, the index is stored in
321 * the buf_index field.
322 *
323 * IORING_SEND_ZC_REPORT_USAGE
324 * If set, SEND[MSG]_ZC should report
325 * the zerocopy usage in cqe.res
326 * for the IORING_CQE_F_NOTIF cqe.
327 * 0 is reported if zerocopy was actually possible.
328 * IORING_NOTIF_USAGE_ZC_COPIED if data was copied
329 * (at least partially).
330 */
331#define IORING_RECVSEND_POLL_FIRST (1U << 0)
332#define IORING_RECV_MULTISHOT (1U << 1)
333#define IORING_RECVSEND_FIXED_BUF (1U << 2)
334#define IORING_SEND_ZC_REPORT_USAGE (1U << 3)
335
336/*
337 * cqe.res for IORING_CQE_F_NOTIF if
338 * IORING_SEND_ZC_REPORT_USAGE was requested
339 *
340 * It should be treated as a flag, all other
341 * bits of cqe.res should be treated as reserved!
342 */
343#define IORING_NOTIF_USAGE_ZC_COPIED (1U << 31)
344
345/*
346 * accept flags stored in sqe->ioprio
347 */
348#define IORING_ACCEPT_MULTISHOT (1U << 0)
349
350/*
351 * IORING_OP_MSG_RING command types, stored in sqe->addr
352 */
353enum {
354 IORING_MSG_DATA, /* pass sqe->len as 'res' and off as user_data */
355 IORING_MSG_SEND_FD, /* send a registered fd to another ring */
356};
357
358/*
359 * IORING_OP_MSG_RING flags (sqe->msg_ring_flags)
360 *
361 * IORING_MSG_RING_CQE_SKIP Don't post a CQE to the target ring. Not
362 * applicable for IORING_MSG_DATA, obviously.
363 */
364#define IORING_MSG_RING_CQE_SKIP (1U << 0)
365/* Pass through the flags from sqe->file_index to cqe->flags */
366#define IORING_MSG_RING_FLAGS_PASS (1U << 1)
367
368/*
369 * IO completion data structure (Completion Queue Entry)
370 */
371struct io_uring_cqe {
372 __u64 user_data; /* sqe->data submission passed back */
373 __s32 res; /* result code for this event */
374 __u32 flags;
375
376 /*
377 * If the ring is initialized with IORING_SETUP_CQE32, then this field
378 * contains 16-bytes of padding, doubling the size of the CQE.
379 */
380 __u64 big_cqe[];
381};
382
383/*
384 * cqe->flags
385 *
386 * IORING_CQE_F_BUFFER If set, the upper 16 bits are the buffer ID
387 * IORING_CQE_F_MORE If set, parent SQE will generate more CQE entries
388 * IORING_CQE_F_SOCK_NONEMPTY If set, more data to read after socket recv
389 * IORING_CQE_F_NOTIF Set for notification CQEs. Can be used to distinct
390 * them from sends.
391 */
392#define IORING_CQE_F_BUFFER (1U << 0)
393#define IORING_CQE_F_MORE (1U << 1)
394#define IORING_CQE_F_SOCK_NONEMPTY (1U << 2)
395#define IORING_CQE_F_NOTIF (1U << 3)
396
397enum {
398 IORING_CQE_BUFFER_SHIFT = 16,
399};
400
401/*
402 * Magic offsets for the application to mmap the data it needs
403 */
404#define IORING_OFF_SQ_RING 0ULL
405#define IORING_OFF_CQ_RING 0x8000000ULL
406#define IORING_OFF_SQES 0x10000000ULL
407#define IORING_OFF_PBUF_RING 0x80000000ULL
408#define IORING_OFF_PBUF_SHIFT 16
409#define IORING_OFF_MMAP_MASK 0xf8000000ULL
410
411/*
412 * Filled with the offset for mmap(2)
413 */
414struct io_sqring_offsets {
415 __u32 head;
416 __u32 tail;
417 __u32 ring_mask;
418 __u32 ring_entries;
419 __u32 flags;
420 __u32 dropped;
421 __u32 array;
422 __u32 resv1;
423 __u64 user_addr;
424};
425
426/*
427 * sq_ring->flags
428 */
429#define IORING_SQ_NEED_WAKEUP (1U << 0) /* needs io_uring_enter wakeup */
430#define IORING_SQ_CQ_OVERFLOW (1U << 1) /* CQ ring is overflown */
431#define IORING_SQ_TASKRUN (1U << 2) /* task should enter the kernel */
432
433struct io_cqring_offsets {
434 __u32 head;
435 __u32 tail;
436 __u32 ring_mask;
437 __u32 ring_entries;
438 __u32 overflow;
439 __u32 cqes;
440 __u32 flags;
441 __u32 resv1;
442 __u64 user_addr;
443};
444
445/*
446 * cq_ring->flags
447 */
448
449/* disable eventfd notifications */
450#define IORING_CQ_EVENTFD_DISABLED (1U << 0)
451
452/*
453 * io_uring_enter(2) flags
454 */
455#define IORING_ENTER_GETEVENTS (1U << 0)
456#define IORING_ENTER_SQ_WAKEUP (1U << 1)
457#define IORING_ENTER_SQ_WAIT (1U << 2)
458#define IORING_ENTER_EXT_ARG (1U << 3)
459#define IORING_ENTER_REGISTERED_RING (1U << 4)
460
461/*
462 * Passed in for io_uring_setup(2). Copied back with updated info on success
463 */
464struct io_uring_params {
465 __u32 sq_entries;
466 __u32 cq_entries;
467 __u32 flags;
468 __u32 sq_thread_cpu;
469 __u32 sq_thread_idle;
470 __u32 features;
471 __u32 wq_fd;
472 __u32 resv[3];
473 struct io_sqring_offsets sq_off;
474 struct io_cqring_offsets cq_off;
475};
476
477/*
478 * io_uring_params->features flags
479 */
480#define IORING_FEAT_SINGLE_MMAP (1U << 0)
481#define IORING_FEAT_NODROP (1U << 1)
482#define IORING_FEAT_SUBMIT_STABLE (1U << 2)
483#define IORING_FEAT_RW_CUR_POS (1U << 3)
484#define IORING_FEAT_CUR_PERSONALITY (1U << 4)
485#define IORING_FEAT_FAST_POLL (1U << 5)
486#define IORING_FEAT_POLL_32BITS (1U << 6)
487#define IORING_FEAT_SQPOLL_NONFIXED (1U << 7)
488#define IORING_FEAT_EXT_ARG (1U << 8)
489#define IORING_FEAT_NATIVE_WORKERS (1U << 9)
490#define IORING_FEAT_RSRC_TAGS (1U << 10)
491#define IORING_FEAT_CQE_SKIP (1U << 11)
492#define IORING_FEAT_LINKED_FILE (1U << 12)
493#define IORING_FEAT_REG_REG_RING (1U << 13)
494
495/*
496 * io_uring_register(2) opcodes and arguments
497 */
498enum {
499 IORING_REGISTER_BUFFERS = 0,
500 IORING_UNREGISTER_BUFFERS = 1,
501 IORING_REGISTER_FILES = 2,
502 IORING_UNREGISTER_FILES = 3,
503 IORING_REGISTER_EVENTFD = 4,
504 IORING_UNREGISTER_EVENTFD = 5,
505 IORING_REGISTER_FILES_UPDATE = 6,
506 IORING_REGISTER_EVENTFD_ASYNC = 7,
507 IORING_REGISTER_PROBE = 8,
508 IORING_REGISTER_PERSONALITY = 9,
509 IORING_UNREGISTER_PERSONALITY = 10,
510 IORING_REGISTER_RESTRICTIONS = 11,
511 IORING_REGISTER_ENABLE_RINGS = 12,
512
513 /* extended with tagging */
514 IORING_REGISTER_FILES2 = 13,
515 IORING_REGISTER_FILES_UPDATE2 = 14,
516 IORING_REGISTER_BUFFERS2 = 15,
517 IORING_REGISTER_BUFFERS_UPDATE = 16,
518
519 /* set/clear io-wq thread affinities */
520 IORING_REGISTER_IOWQ_AFF = 17,
521 IORING_UNREGISTER_IOWQ_AFF = 18,
522
523 /* set/get max number of io-wq workers */
524 IORING_REGISTER_IOWQ_MAX_WORKERS = 19,
525
526 /* register/unregister io_uring fd with the ring */
527 IORING_REGISTER_RING_FDS = 20,
528 IORING_UNREGISTER_RING_FDS = 21,
529
530 /* register ring based provide buffer group */
531 IORING_REGISTER_PBUF_RING = 22,
532 IORING_UNREGISTER_PBUF_RING = 23,
533
534 /* sync cancelation API */
535 IORING_REGISTER_SYNC_CANCEL = 24,
536
537 /* register a range of fixed file slots for automatic slot allocation */
538 IORING_REGISTER_FILE_ALLOC_RANGE = 25,
539
540 /* this goes last */
541 IORING_REGISTER_LAST,
542
543 /* flag added to the opcode to use a registered ring fd */
544 IORING_REGISTER_USE_REGISTERED_RING = 1U << 31
545};
546
547/* io-wq worker categories */
548enum {
549 IO_WQ_BOUND,
550 IO_WQ_UNBOUND,
551};
552
553/* deprecated, see struct io_uring_rsrc_update */
554struct io_uring_files_update {
555 __u32 offset;
556 __u32 resv;
557 __aligned_u64 /* __s32 * */ fds;
558};
559
560/*
561 * Register a fully sparse file space, rather than pass in an array of all
562 * -1 file descriptors.
563 */
564#define IORING_RSRC_REGISTER_SPARSE (1U << 0)
565
566struct io_uring_rsrc_register {
567 __u32 nr;
568 __u32 flags;
569 __u64 resv2;
570 __aligned_u64 data;
571 __aligned_u64 tags;
572};
573
574struct io_uring_rsrc_update {
575 __u32 offset;
576 __u32 resv;
577 __aligned_u64 data;
578};
579
580struct io_uring_rsrc_update2 {
581 __u32 offset;
582 __u32 resv;
583 __aligned_u64 data;
584 __aligned_u64 tags;
585 __u32 nr;
586 __u32 resv2;
587};
588
589/* Skip updating fd indexes set to this value in the fd table */
590#define IORING_REGISTER_FILES_SKIP (-2)
591
592#define IO_URING_OP_SUPPORTED (1U << 0)
593
594struct io_uring_probe_op {
595 __u8 op;
596 __u8 resv;
597 __u16 flags; /* IO_URING_OP_* flags */
598 __u32 resv2;
599};
600
601struct io_uring_probe {
602 __u8 last_op; /* last opcode supported */
603 __u8 ops_len; /* length of ops[] array below */
604 __u16 resv;
605 __u32 resv2[3];
606 struct io_uring_probe_op ops[];
607};
608
609struct io_uring_restriction {
610 __u16 opcode;
611 union {
612 __u8 register_op; /* IORING_RESTRICTION_REGISTER_OP */
613 __u8 sqe_op; /* IORING_RESTRICTION_SQE_OP */
614 __u8 sqe_flags; /* IORING_RESTRICTION_SQE_FLAGS_* */
615 };
616 __u8 resv;
617 __u32 resv2[3];
618};
619
620struct io_uring_buf {
621 __u64 addr;
622 __u32 len;
623 __u16 bid;
624 __u16 resv;
625};
626
627struct io_uring_buf_ring {
628 union {
629 /*
630 * To avoid spilling into more pages than we need to, the
631 * ring tail is overlaid with the io_uring_buf->resv field.
632 */
633 struct {
634 __u64 resv1;
635 __u32 resv2;
636 __u16 resv3;
637 __u16 tail;
638 };
639 __DECLARE_FLEX_ARRAY(struct io_uring_buf, bufs);
640 };
641};
642
643/*
644 * Flags for IORING_REGISTER_PBUF_RING.
645 *
646 * IOU_PBUF_RING_MMAP: If set, kernel will allocate the memory for the ring.
647 * The application must not set a ring_addr in struct
648 * io_uring_buf_reg, instead it must subsequently call
649 * mmap(2) with the offset set as:
650 * IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT)
651 * to get a virtual mapping for the ring.
652 */
653enum {
654 IOU_PBUF_RING_MMAP = 1,
655};
656
657/* argument for IORING_(UN)REGISTER_PBUF_RING */
658struct io_uring_buf_reg {
659 __u64 ring_addr;
660 __u32 ring_entries;
661 __u16 bgid;
662 __u16 flags;
663 __u64 resv[3];
664};
665
666/*
667 * io_uring_restriction->opcode values
668 */
669enum {
670 /* Allow an io_uring_register(2) opcode */
671 IORING_RESTRICTION_REGISTER_OP = 0,
672
673 /* Allow an sqe opcode */
674 IORING_RESTRICTION_SQE_OP = 1,
675
676 /* Allow sqe flags */
677 IORING_RESTRICTION_SQE_FLAGS_ALLOWED = 2,
678
679 /* Require sqe flags (these flags must be set on each submission) */
680 IORING_RESTRICTION_SQE_FLAGS_REQUIRED = 3,
681
682 IORING_RESTRICTION_LAST
683};
684
685struct io_uring_getevents_arg {
686 __u64 sigmask;
687 __u32 sigmask_sz;
688 __u32 pad;
689 __u64 ts;
690};
691
692/*
693 * Argument for IORING_REGISTER_SYNC_CANCEL
694 */
695struct io_uring_sync_cancel_reg {
696 __u64 addr;
697 __s32 fd;
698 __u32 flags;
699 struct __kernel_timespec timeout;
700 __u64 pad[4];
701};
702
703/*
704 * Argument for IORING_REGISTER_FILE_ALLOC_RANGE
705 * The range is specified as [off, off + len)
706 */
707struct io_uring_file_index_range {
708 __u32 off;
709 __u32 len;
710 __u64 resv;
711};
712
713struct io_uring_recvmsg_out {
714 __u32 namelen;
715 __u32 controllen;
716 __u32 payloadlen;
717 __u32 flags;
718};
719
720#ifdef __cplusplus
721}
722#endif
723
724#endif