tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
fork
Configure Feed
Select the types of activity you want to include in your feed.
1# SPDX-License-Identifier: GPL-2.0-only
2menu "Distributed Switch Architecture drivers"
3 depends on NET_DSA
4
5source "drivers/net/dsa/b53/Kconfig"
6
7config NET_DSA_BCM_SF2
8 tristate "Broadcom Starfighter 2 Ethernet switch support"
9 depends on HAS_IOMEM
10 select NET_DSA_TAG_BRCM
11 select FIXED_PHY
12 select BCM7XXX_PHY
13 select MDIO_BCM_UNIMAC
14 select B53
15 help
16 This enables support for the Broadcom Starfighter 2 Ethernet
17 switch chips.
18
19config NET_DSA_LOOP
20 tristate "DSA mock-up Ethernet switch chip support"
21 select NET_DSA_TAG_NONE
22 select FIXED_PHY
23 help
24 This enables support for a fake mock-up switch chip which
25 exercises the DSA APIs.
26
27source "drivers/net/dsa/hirschmann/Kconfig"
28
29config NET_DSA_LANTIQ_GSWIP
30 tristate "Lantiq / Intel GSWIP"
31 depends on HAS_IOMEM
32 select NET_DSA_TAG_GSWIP
33 help
34 This enables support for the Lantiq / Intel GSWIP 2.1 found in
35 the xrx200 / VR9 SoC.
36
37config NET_DSA_MT7530
38 tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
39 select NET_DSA_TAG_MTK
40 select MEDIATEK_GE_PHY
41 imply NET_DSA_MT7530_MDIO
42 imply NET_DSA_MT7530_MMIO
43 help
44 This enables support for the MediaTek MT7530 and MT7531 Ethernet
45 switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
46 MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
47 supported as well.
48
49config NET_DSA_MT7530_MDIO
50 tristate "MediaTek MT7530 MDIO interface driver"
51 depends on NET_DSA_MT7530
52 select PCS_MTK_LYNXI
53 help
54 This enables support for the MediaTek MT7530 and MT7531 switch
55 chips which are connected via MDIO, as well as multi-chip
56 module MT7530 which can be found in the MT7621AT, MT7621DAT,
57 MT7621ST and MT7623AI SoCs.
58
59config NET_DSA_MT7530_MMIO
60 tristate "MediaTek MT7530 MMIO interface driver"
61 depends on NET_DSA_MT7530
62 depends on HAS_IOMEM
63 help
64 This enables support for the built-in Ethernet switch found
65 in the MediaTek MT7988 SoC.
66 The switch is a similar design as MT7531, but the switch registers
67 are directly mapped into the SoCs register space rather than being
68 accessible via MDIO.
69
70config NET_DSA_MV88E6060
71 tristate "Marvell 88E6060 ethernet switch chip support"
72 select NET_DSA_TAG_TRAILER
73 help
74 This enables support for the Marvell 88E6060 ethernet switch
75 chip.
76
77source "drivers/net/dsa/microchip/Kconfig"
78
79source "drivers/net/dsa/mv88e6xxx/Kconfig"
80
81source "drivers/net/dsa/ocelot/Kconfig"
82
83source "drivers/net/dsa/qca/Kconfig"
84
85source "drivers/net/dsa/sja1105/Kconfig"
86
87source "drivers/net/dsa/xrs700x/Kconfig"
88
89source "drivers/net/dsa/realtek/Kconfig"
90
91config NET_DSA_RZN1_A5PSW
92 tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
93 depends on OF && ARCH_RZN1
94 select NET_DSA_TAG_RZN1_A5PSW
95 select PCS_RZN1_MIIC
96 help
97 This driver supports the A5PSW switch, which is embedded in Renesas
98 RZ/N1 SoC.
99
100config NET_DSA_SMSC_LAN9303
101 tristate
102 select NET_DSA_TAG_LAN9303
103 select REGMAP
104 help
105 This enables support for the Microchip LAN9303/LAN9354 3 port ethernet
106 switch chips.
107
108config NET_DSA_SMSC_LAN9303_I2C
109 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
110 depends on I2C
111 depends on VLAN_8021Q || VLAN_8021Q=n
112 select NET_DSA_SMSC_LAN9303
113 select REGMAP_I2C
114 help
115 Enable access functions if the SMSC/Microchip LAN9303 is configured
116 for I2C managed mode.
117
118config NET_DSA_SMSC_LAN9303_MDIO
119 tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode"
120 select NET_DSA_SMSC_LAN9303
121 depends on VLAN_8021Q || VLAN_8021Q=n
122 help
123 Enable access functions if the Microchip LAN9303/LAN9354 is configured
124 for MDIO managed mode.
125
126config NET_DSA_VITESSE_VSC73XX
127 tristate
128 select NET_DSA_TAG_NONE
129 select FIXED_PHY
130 select VITESSE_PHY
131 select GPIOLIB
132 help
133 This enables support for the Vitesse VSC7385, VSC7388,
134 VSC7395 and VSC7398 SparX integrated ethernet switches.
135
136config NET_DSA_VITESSE_VSC73XX_SPI
137 tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
138 depends on SPI
139 select NET_DSA_VITESSE_VSC73XX
140 help
141 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
142 and VSC7398 SparX integrated ethernet switches in SPI managed mode.
143
144config NET_DSA_VITESSE_VSC73XX_PLATFORM
145 tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
146 depends on HAS_IOMEM
147 select NET_DSA_VITESSE_VSC73XX
148 help
149 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
150 and VSC7398 SparX integrated ethernet switches, connected over
151 a CPU-attached address bus and work in memory-mapped I/O mode.
152endmenu