tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
2boards (Example: 2Big/5Big Network v2, 2Big NAS).
3
4Required properties:
5- compatible: "lacie,netxbig-leds".
6- gpio-ext: Phandle for the gpio-ext bus.
7
8Optional properties:
9- timers: Timer array. Each timer entry is represented by three integers:
10 Mode (gpio-ext bus), delay_on and delay_off.
11
12Each LED is represented as a sub-node of the netxbig-leds device.
13
14Required sub-node properties:
15- mode-addr: Mode register address on gpio-ext bus.
16- mode-val: Mode to value mapping. Each entry is represented by two integers:
17 A mode and the corresponding value on the gpio-ext bus.
18- bright-addr: Brightness register address on gpio-ext bus.
19- max-brightness: Maximum brightness value.
20
21Optional sub-node properties:
22- label: Name for this LED. If omitted, the label is taken from the node name.
23- linux,default-trigger: Trigger assigned to the LED.
24
25Example:
26
27netxbig-leds {
28 compatible = "lacie,netxbig-leds";
29
30 gpio-ext = &gpio_ext;
31
32 timers = <NETXBIG_LED_TIMER1 500 500
33 NETXBIG_LED_TIMER2 500 1000>;
34
35 blue-power {
36 label = "netxbig:blue:power";
37 mode-addr = <0>;
38 mode-val = <NETXBIG_LED_OFF 0
39 NETXBIG_LED_ON 1
40 NETXBIG_LED_TIMER1 3
41 NETXBIG_LED_TIMER2 7>;
42 bright-addr = <1>;
43 max-brightness = <7>;
44 };
45 red-power {
46 label = "netxbig:red:power";
47 mode-addr = <0>;
48 mode-val = <NETXBIG_LED_OFF 0
49 NETXBIG_LED_ON 2
50 NETXBIG_LED_TIMER1 4>;
51 bright-addr = <1>;
52 max-brightness = <7>;
53 };
54 blue-sata0 {
55 label = "netxbig:blue:sata0";
56 mode-addr = <3>;
57 mode-val = <NETXBIG_LED_OFF 0
58 NETXBIG_LED_ON 7
59 NETXBIG_LED_SATA 1
60 NETXBIG_LED_TIMER1 3>;
61 bright-addr = <2>;
62 max-brightness = <7>;
63 };
64 red-sata0 {
65 label = "netxbig:red:sata0";
66 mode-addr = <3>;
67 mode-val = <NETXBIG_LED_OFF 0
68 NETXBIG_LED_ON 2
69 NETXBIG_LED_TIMER1 4>;
70 bright-addr = <2>;
71 max-brightness = <7>;
72 };
73 blue-sata1 {
74 label = "netxbig:blue:sata1";
75 mode-addr = <4>;
76 mode-val = <NETXBIG_LED_OFF 0
77 NETXBIG_LED_ON 7
78 NETXBIG_LED_SATA 1
79 NETXBIG_LED_TIMER1 3>;
80 bright-addr = <2>;
81 max-brightness = <7>;
82 };
83 red-sata1 {
84 label = "netxbig:red:sata1";
85 mode-addr = <4>;
86 mode-val = <NETXBIG_LED_OFF 0
87 NETXBIG_LED_ON 2
88 NETXBIG_LED_TIMER1 4>;
89 bright-addr = <2>;
90 max-brightness = <7>;
91 };
92};