Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only
2menu "Distributed Switch Architecture drivers"
3 depends on NET_DSA
4
5source "drivers/net/dsa/b53/Kconfig"
6
7config NET_DSA_BCM_SF2
8 tristate "Broadcom Starfighter 2 Ethernet switch support"
9 depends on HAS_IOMEM
10 select NET_DSA_TAG_BRCM
11 select FIXED_PHY
12 select BCM7XXX_PHY
13 select MDIO_BCM_UNIMAC
14 select B53
15 help
16 This enables support for the Broadcom Starfighter 2 Ethernet
17 switch chips.
18
19config NET_DSA_LOOP
20 tristate "DSA mock-up Ethernet switch chip support"
21 select NET_DSA_TAG_NONE
22 select FIXED_PHY
23 help
24 This enables support for a fake mock-up switch chip which
25 exercises the DSA APIs.
26
27source "drivers/net/dsa/hirschmann/Kconfig"
28
29source "drivers/net/dsa/lantiq/Kconfig"
30
31config NET_DSA_MT7530
32 tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
33 select NET_DSA_TAG_MTK
34 select REGMAP_IRQ
35 imply NET_DSA_MT7530_MDIO
36 imply NET_DSA_MT7530_MMIO
37 help
38 This enables support for the MediaTek MT7530 and MT7531 Ethernet
39 switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
40 MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
41 supported as well.
42
43config NET_DSA_MT7530_MDIO
44 tristate "MediaTek MT7530 MDIO interface driver"
45 depends on NET_DSA_MT7530
46 select MEDIATEK_GE_PHY
47 select PCS_MTK_LYNXI
48 help
49 This enables support for the MediaTek MT7530 and MT7531 switch
50 chips which are connected via MDIO, as well as multi-chip
51 module MT7530 which can be found in the MT7621AT, MT7621DAT,
52 MT7621ST and MT7623AI SoCs.
53
54config NET_DSA_MT7530_MMIO
55 tristate "MediaTek MT7530 MMIO interface driver"
56 depends on NET_DSA_MT7530
57 depends on HAS_IOMEM
58 imply MEDIATEK_GE_SOC_PHY
59 help
60 This enables support for the built-in Ethernet switch found
61 in the MediaTek MT7988 SoC.
62 The switch is a similar design as MT7531, but the switch registers
63 are directly mapped into the SoCs register space rather than being
64 accessible via MDIO.
65
66config NET_DSA_MV88E6060
67 tristate "Marvell 88E6060 ethernet switch chip support"
68 select NET_DSA_TAG_TRAILER
69 help
70 This enables support for the Marvell 88E6060 ethernet switch
71 chip.
72
73source "drivers/net/dsa/microchip/Kconfig"
74
75source "drivers/net/dsa/mv88e6xxx/Kconfig"
76
77source "drivers/net/dsa/ocelot/Kconfig"
78
79source "drivers/net/dsa/qca/Kconfig"
80
81source "drivers/net/dsa/sja1105/Kconfig"
82
83source "drivers/net/dsa/xrs700x/Kconfig"
84
85source "drivers/net/dsa/realtek/Kconfig"
86
87config NET_DSA_RZN1_A5PSW
88 tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
89 depends on OF && (ARCH_RZN1 || COMPILE_TEST)
90 select NET_DSA_TAG_RZN1_A5PSW
91 select PCS_RZN1_MIIC
92 help
93 This driver supports the A5PSW switch, which is embedded in Renesas
94 RZ/N1 SoC.
95
96config NET_DSA_KS8995
97 tristate "Micrel KS8995 family 5-ports 10/100 Ethernet switches"
98 depends on SPI
99 select NET_DSA_TAG_NONE
100 help
101 This driver supports the Micrel KS8995 family of 10/100 Mbit ethernet
102 switches, managed over SPI.
103
104config NET_DSA_SMSC_LAN9303
105 tristate
106 select NET_DSA_TAG_LAN9303
107 select REGMAP
108 imply SMSC_PHY
109 help
110 This enables support for the Microchip LAN9303/LAN9354 3 port ethernet
111 switch chips.
112
113config NET_DSA_SMSC_LAN9303_I2C
114 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
115 depends on I2C
116 depends on VLAN_8021Q || VLAN_8021Q=n
117 select NET_DSA_SMSC_LAN9303
118 select REGMAP_I2C
119 help
120 Enable access functions if the SMSC/Microchip LAN9303 is configured
121 for I2C managed mode.
122
123config NET_DSA_SMSC_LAN9303_MDIO
124 tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode"
125 select NET_DSA_SMSC_LAN9303
126 depends on VLAN_8021Q || VLAN_8021Q=n
127 help
128 Enable access functions if the Microchip LAN9303/LAN9354 is configured
129 for MDIO managed mode.
130
131config NET_DSA_VITESSE_VSC73XX
132 tristate
133 select NET_DSA_TAG_VSC73XX_8021Q
134 select FIXED_PHY
135 select VITESSE_PHY
136 select GPIOLIB
137 help
138 This enables support for the Vitesse VSC7385, VSC7388,
139 VSC7395 and VSC7398 SparX integrated ethernet switches.
140
141config NET_DSA_VITESSE_VSC73XX_SPI
142 tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
143 depends on SPI
144 select NET_DSA_VITESSE_VSC73XX
145 help
146 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
147 and VSC7398 SparX integrated ethernet switches in SPI managed mode.
148
149config NET_DSA_VITESSE_VSC73XX_PLATFORM
150 tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
151 depends on HAS_IOMEM
152 select NET_DSA_VITESSE_VSC73XX
153 help
154 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
155 and VSC7398 SparX integrated ethernet switches, connected over
156 a CPU-attached address bus and work in memory-mapped I/O mode.
157
158config NET_DSA_YT921X
159 tristate "Motorcomm YT9215 ethernet switch chip support"
160 select NET_DSA_TAG_YT921X
161 help
162 This enables support for the Motorcomm YT9215 ethernet switch
163 chip.
164endmenu